From: Tony Luck <tony.luck@intel.com>
To: Fenghua Yu <fenghuay@nvidia.com>,
Reinette Chatre <reinette.chatre@intel.com>,
Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>,
Peter Newman <peternewman@google.com>,
James Morse <james.morse@arm.com>,
Babu Moger <babu.moger@amd.com>,
Drew Fustini <dfustini@baylibre.com>,
Dave Martin <Dave.Martin@arm.com>, Chen Yu <yu.c.chen@intel.com>
Cc: x86@kernel.org, linux-kernel@vger.kernel.org,
patches@lists.linux.dev, Tony Luck <tony.luck@intel.com>
Subject: [PATCH v10 12/28] x86,fs/resctrl: Add an architectural hook called for each mount
Date: Fri, 12 Sep 2025 15:10:33 -0700 [thread overview]
Message-ID: <20250912221053.11349-13-tony.luck@intel.com> (raw)
In-Reply-To: <20250912221053.11349-1-tony.luck@intel.com>
Enumeration of Intel telemetry events is an asynchronous process involving
several mutually dependent drivers added as auxiliary devices during
the device_initcall() phase of Linux boot. The process finishes after
the probe functions of these drivers completes. But this happens after
resctrl_arch_late_init() is executed.
Tracing the enumeration process shows that it does complete a full seven
seconds before the earliest possible mount of the resctrl file system
(when included in /etc/fstab for automatic mount by systemd).
Add a hook at the beginning of the mount code that will be used
to check for telemetry events and initialize if any are found.
Call the hook on every attempted mount. Expectations are that
most actions (like enumeration) will only need to be performed
on the first call.
resctrl filesystem calls the hook with no locks held. Architecture code
is responsible for any required locking.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
---
include/linux/resctrl.h | 6 ++++++
arch/x86/kernel/cpu/resctrl/core.c | 9 +++++++++
fs/resctrl/rdtgroup.c | 2 ++
3 files changed, 17 insertions(+)
diff --git a/include/linux/resctrl.h b/include/linux/resctrl.h
index de66928e9430..6350064ac8be 100644
--- a/include/linux/resctrl.h
+++ b/include/linux/resctrl.h
@@ -511,6 +511,12 @@ void resctrl_offline_mon_domain(struct rdt_resource *r, struct rdt_domain_hdr *h
void resctrl_online_cpu(unsigned int cpu);
void resctrl_offline_cpu(unsigned int cpu);
+/*
+ * Architecture hook called at beginning of each file system mount attempt.
+ * No locks are held.
+ */
+void resctrl_arch_pre_mount(void);
+
/**
* resctrl_arch_rmid_read() - Read the eventid counter corresponding to rmid
* for this resource and domain.
diff --git a/arch/x86/kernel/cpu/resctrl/core.c b/arch/x86/kernel/cpu/resctrl/core.c
index 7219004e896f..05b9fd415d78 100644
--- a/arch/x86/kernel/cpu/resctrl/core.c
+++ b/arch/x86/kernel/cpu/resctrl/core.c
@@ -720,6 +720,15 @@ static int resctrl_arch_offline_cpu(unsigned int cpu)
return 0;
}
+void resctrl_arch_pre_mount(void)
+{
+ static atomic_t only_once = ATOMIC_INIT(0);
+ int old = 0;
+
+ if (!atomic_try_cmpxchg(&only_once, &old, 1))
+ return;
+}
+
enum {
RDT_FLAG_CMT,
RDT_FLAG_MBM_TOTAL,
diff --git a/fs/resctrl/rdtgroup.c b/fs/resctrl/rdtgroup.c
index 4f992b497092..223fd8b761e6 100644
--- a/fs/resctrl/rdtgroup.c
+++ b/fs/resctrl/rdtgroup.c
@@ -2720,6 +2720,8 @@ static int rdt_get_tree(struct fs_context *fc)
struct rdt_resource *r;
int ret;
+ resctrl_arch_pre_mount();
+
cpus_read_lock();
mutex_lock(&rdtgroup_mutex);
/*
--
2.51.0
next prev parent reply other threads:[~2025-09-12 22:11 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-12 22:10 [PATCH v10 00/28] x86,fs/resctrl telemetry monitoring Tony Luck
2025-09-12 22:10 ` [PATCH v10 01/28] x86,fs/resctrl: Improve domain type checking Tony Luck
2025-09-12 22:10 ` [PATCH v10 02/28] x86/resctrl: Move L3 initialization into new helper function Tony Luck
2025-09-18 21:49 ` Reinette Chatre
2025-09-19 18:09 ` Luck, Tony
2025-09-22 23:29 ` Reinette Chatre
2025-09-23 10:09 ` Borislav Petkov
2025-09-12 22:10 ` [PATCH v10 03/28] x86,fs/resctrl: Refactor domain_remove_cpu_mon() ready for new domain types Tony Luck
2025-09-18 21:49 ` Reinette Chatre
2025-09-12 22:10 ` [PATCH v10 04/28] x86/resctrl: Clean up domain_remove_cpu_ctrl() Tony Luck
2025-09-12 22:10 ` [PATCH v10 05/28] x86,fs/resctrl: Use struct rdt_domain_hdr instead of struct rdt_mon_domain Tony Luck
2025-09-18 21:54 ` Reinette Chatre
2025-09-12 22:10 ` [PATCH v10 06/28] x86,fs/resctrl: Use struct rdt_domain_hdr when reading counters Tony Luck
2025-09-12 22:10 ` [PATCH v10 07/28] x86,fs/resctrl: Rename struct rdt_mon_domain and rdt_hw_mon_domain Tony Luck
2025-09-12 22:10 ` [PATCH v10 08/28] x86,fs/resctrl: Rename some L3 specific functions Tony Luck
2025-09-12 22:10 ` [PATCH v10 09/28] fs/resctrl: Make event details accessible to functions when reading events Tony Luck
2025-09-12 22:10 ` [PATCH v10 10/28] x86,fs/resctrl: Handle events that can be read from any CPU Tony Luck
2025-09-12 22:10 ` [PATCH v10 11/28] x86,fs/resctrl: Support binary fixed point event counters Tony Luck
2025-09-12 22:10 ` Tony Luck [this message]
2025-09-12 22:10 ` [PATCH v10 13/28] x86,fs/resctrl: Add and initialize rdt_resource for package scope monitor Tony Luck
2025-09-12 22:10 ` [PATCH v10 14/28] x86/resctrl: Discover hardware telemetry events Tony Luck
2025-09-12 22:10 ` [PATCH v10 15/28] x86,fs/resctrl: Fill in details of events for guid 0x26696143 and 0x26557651 Tony Luck
2025-09-12 22:10 ` [PATCH v10 16/28] x86,fs/resctrl: Add architectural event pointer Tony Luck
2025-09-12 22:10 ` [PATCH v10 17/28] x86/resctrl: Find and enable usable telemetry events Tony Luck
2025-09-12 22:10 ` [PATCH v10 18/28] x86/resctrl: Read " Tony Luck
2025-09-12 22:10 ` [PATCH v10 19/28] x86/resctrl: Handle domain creation/deletion for RDT_RESOURCE_PERF_PKG Tony Luck
2025-09-12 22:10 ` [PATCH v10 20/28] x86/resctrl: Add energy/perf choices to rdt boot option Tony Luck
2025-09-12 22:10 ` [PATCH v10 21/28] x86/resctrl: Handle number of RMIDs supported by telemetry resources Tony Luck
2025-09-12 22:10 ` [PATCH v10 22/28] fs/resctrl: Move allocation/free of closid_num_dirty_rmid[] Tony Luck
2025-09-12 22:10 ` [PATCH v10 23/28] fs,x86/resctrl: Compute number of RMIDs as minimum across resources Tony Luck
2025-09-12 22:10 ` [PATCH v10 24/28] fs/resctrl: Move RMID initialization to first mount Tony Luck
2025-09-12 22:10 ` [PATCH v10 25/28] x86/resctrl: Enable RDT_RESOURCE_PERF_PKG Tony Luck
2025-09-12 22:10 ` [PATCH v10 26/28] fs/resctrl: Provide interface to create architecture specific debugfs area Tony Luck
2025-09-12 22:10 ` [PATCH v10 27/28] x86/resctrl: Add debugfs files to show telemetry aggregator status Tony Luck
2025-09-12 22:10 ` [PATCH v10 28/28] x86,fs/resctrl: Update Documentation for package events Tony Luck
2025-09-15 15:21 ` Luck, Tony
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250912221053.11349-13-tony.luck@intel.com \
--to=tony.luck@intel.com \
--cc=Dave.Martin@arm.com \
--cc=babu.moger@amd.com \
--cc=dfustini@baylibre.com \
--cc=fenghuay@nvidia.com \
--cc=james.morse@arm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=maciej.wieczor-retman@intel.com \
--cc=patches@lists.linux.dev \
--cc=peternewman@google.com \
--cc=reinette.chatre@intel.com \
--cc=x86@kernel.org \
--cc=yu.c.chen@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox