From: Tony Luck <tony.luck@intel.com>
To: Fenghua Yu <fenghuay@nvidia.com>,
Reinette Chatre <reinette.chatre@intel.com>,
Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>,
Peter Newman <peternewman@google.com>,
James Morse <james.morse@arm.com>,
Babu Moger <babu.moger@amd.com>,
Drew Fustini <dfustini@baylibre.com>,
Dave Martin <Dave.Martin@arm.com>, Chen Yu <yu.c.chen@intel.com>
Cc: x86@kernel.org, linux-kernel@vger.kernel.org,
patches@lists.linux.dev, Tony Luck <tony.luck@intel.com>
Subject: [PATCH v11 24/31] fs/resctrl: Move allocation/free of closid_num_dirty_rmid[]
Date: Thu, 25 Sep 2025 13:03:18 -0700 [thread overview]
Message-ID: <20250925200328.64155-25-tony.luck@intel.com> (raw)
In-Reply-To: <20250925200328.64155-1-tony.luck@intel.com>
closid_num_dirty_rmid[] is allocated in dom_data_init() during resctrl
initialization and freed by dom_data_exit() during resctrl exit giving
it the same life cycle as rmid_ptrs[].
Move closid_num_dirty_rmid[] allocaction/free out to
resctrl_l3_mon_resource_init() and resctrl_l3_mon_resource_exit() in
preparation for rmid_ptrs[] to be allocated on resctrl mount in support
of the new telemetry events.
Keep the rdtgroup_mutex protection around the allocation/free of
closid_num_dirty_rmid[] as ARM needs this to guarantee memory
ordering.
Signed-off-by: Tony Luck <tony.luck@intel.com>
---
fs/resctrl/monitor.c | 77 ++++++++++++++++++++++++++++----------------
1 file changed, 49 insertions(+), 28 deletions(-)
diff --git a/fs/resctrl/monitor.c b/fs/resctrl/monitor.c
index d484983c0f02..5960a0afd0ca 100644
--- a/fs/resctrl/monitor.c
+++ b/fs/resctrl/monitor.c
@@ -883,36 +883,14 @@ void mbm_setup_overflow_handler(struct rdt_l3_mon_domain *dom, unsigned long del
static int dom_data_init(struct rdt_resource *r)
{
u32 idx_limit = resctrl_arch_system_num_rmid_idx();
- u32 num_closid = resctrl_arch_get_num_closid(r);
struct rmid_entry *entry = NULL;
int err = 0, i;
u32 idx;
mutex_lock(&rdtgroup_mutex);
- if (IS_ENABLED(CONFIG_RESCTRL_RMID_DEPENDS_ON_CLOSID)) {
- u32 *tmp;
-
- /*
- * If the architecture hasn't provided a sanitised value here,
- * this may result in larger arrays than necessary. Resctrl will
- * use a smaller system wide value based on the resources in
- * use.
- */
- tmp = kcalloc(num_closid, sizeof(*tmp), GFP_KERNEL);
- if (!tmp) {
- err = -ENOMEM;
- goto out_unlock;
- }
-
- closid_num_dirty_rmid = tmp;
- }
rmid_ptrs = kcalloc(idx_limit, sizeof(struct rmid_entry), GFP_KERNEL);
if (!rmid_ptrs) {
- if (IS_ENABLED(CONFIG_RESCTRL_RMID_DEPENDS_ON_CLOSID)) {
- kfree(closid_num_dirty_rmid);
- closid_num_dirty_rmid = NULL;
- }
err = -ENOMEM;
goto out_unlock;
}
@@ -948,11 +926,6 @@ static void dom_data_exit(struct rdt_resource *r)
if (!r->mon_capable)
goto out_unlock;
- if (IS_ENABLED(CONFIG_RESCTRL_RMID_DEPENDS_ON_CLOSID)) {
- kfree(closid_num_dirty_rmid);
- closid_num_dirty_rmid = NULL;
- }
-
kfree(rmid_ptrs);
rmid_ptrs = NULL;
@@ -1789,6 +1762,43 @@ ssize_t mbm_L3_assignments_write(struct kernfs_open_file *of, char *buf,
return ret ?: nbytes;
}
+static int closid_num_dirty_rmid_alloc(struct rdt_resource *r)
+{
+ if (IS_ENABLED(CONFIG_RESCTRL_RMID_DEPENDS_ON_CLOSID)) {
+ u32 num_closid = resctrl_arch_get_num_closid(r);
+ u32 *tmp;
+
+ /* For ARM memory ordering access to closid_num_dirty_rmid */
+ mutex_lock(&rdtgroup_mutex);
+
+ /*
+ * If the architecture hasn't provided a sanitised value here,
+ * this may result in larger arrays than necessary. Resctrl will
+ * use a smaller system wide value based on the resources in
+ * use.
+ */
+ tmp = kcalloc(num_closid, sizeof(*tmp), GFP_KERNEL);
+ if (!tmp)
+ return -ENOMEM;
+
+ closid_num_dirty_rmid = tmp;
+
+ mutex_unlock(&rdtgroup_mutex);
+ }
+
+ return 0;
+}
+
+static void closid_num_dirty_rmid_free(void)
+{
+ if (IS_ENABLED(CONFIG_RESCTRL_RMID_DEPENDS_ON_CLOSID)) {
+ mutex_lock(&rdtgroup_mutex);
+ kfree(closid_num_dirty_rmid);
+ closid_num_dirty_rmid = NULL;
+ mutex_unlock(&rdtgroup_mutex);
+ }
+}
+
/**
* resctrl_l3_mon_resource_init() - Initialise global monitoring structures.
*
@@ -1809,10 +1819,16 @@ int resctrl_l3_mon_resource_init(void)
if (!r->mon_capable)
return 0;
- ret = dom_data_init(r);
+ ret = closid_num_dirty_rmid_alloc(r);
if (ret)
return ret;
+ ret = dom_data_init(r);
+ if (ret) {
+ closid_num_dirty_rmid_free();
+ return ret;
+ }
+
if (resctrl_arch_is_evt_configurable(QOS_L3_MBM_TOTAL_EVENT_ID)) {
mon_event_all[QOS_L3_MBM_TOTAL_EVENT_ID].configurable = true;
resctrl_file_fflags_init("mbm_total_bytes_config",
@@ -1857,5 +1873,10 @@ void resctrl_l3_mon_resource_exit(void)
{
struct rdt_resource *r = resctrl_arch_get_resource(RDT_RESOURCE_L3);
+ if (!r->mon_capable)
+ return;
+
+ closid_num_dirty_rmid_free();
+
dom_data_exit(r);
}
--
2.51.0
next prev parent reply other threads:[~2025-09-25 20:04 UTC|newest]
Thread overview: 84+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-25 20:02 [PATCH v11 00/31] x86,fs/resctrl telemetry monitoring Tony Luck
2025-09-25 20:02 ` [PATCH v11 01/31] x86,fs/resctrl: Improve domain type checking Tony Luck
2025-10-03 15:28 ` Reinette Chatre
2025-09-25 20:02 ` [PATCH v11 02/31] x86/resctrl: Move L3 initialization into new helper function Tony Luck
2025-10-03 15:28 ` Reinette Chatre
2025-09-25 20:02 ` [PATCH v11 03/31] x86,fs/resctrl: Refactor domain_remove_cpu_mon() ready for new domain types Tony Luck
2025-10-03 15:29 ` Reinette Chatre
2025-09-25 20:02 ` [PATCH v11 04/31] x86/resctrl: Clean up domain_remove_cpu_ctrl() Tony Luck
2025-10-03 15:30 ` Reinette Chatre
2025-09-25 20:02 ` [PATCH v11 05/31] x86,fs/resctrl: Refactor domain create/remove using struct rdt_domain_hdr Tony Luck
2025-10-03 15:33 ` Reinette Chatre
2025-10-03 22:55 ` Luck, Tony
2025-10-06 21:32 ` Reinette Chatre
2025-09-25 20:03 ` [PATCH v11 06/31] x86,fs/resctrl: Use struct rdt_domain_hdr when reading counters Tony Luck
2025-10-03 15:34 ` Reinette Chatre
2025-10-03 22:59 ` Luck, Tony
2025-09-25 20:03 ` [PATCH v11 07/31] x86,fs/resctrl: Rename struct rdt_mon_domain and rdt_hw_mon_domain Tony Luck
2025-10-03 23:24 ` Reinette Chatre
2025-09-25 20:03 ` [PATCH v11 08/31] x86,fs/resctrl: Rename some L3 specific functions Tony Luck
2025-10-03 23:24 ` Reinette Chatre
2025-09-25 20:03 ` [PATCH v11 09/31] fs/resctrl: Make event details accessible to functions when reading events Tony Luck
2025-10-03 23:27 ` Reinette Chatre
2025-09-25 20:03 ` [PATCH v11 10/31] x86,fs/resctrl: Handle events that can be read from any CPU Tony Luck
2025-10-03 23:32 ` Reinette Chatre
2025-09-25 20:03 ` [PATCH v11 11/31] x86,fs/resctrl: Support binary fixed point event counters Tony Luck
2025-09-25 20:03 ` [PATCH v11 12/31] x86,fs/resctrl: Add an architectural hook called for each mount Tony Luck
2025-09-25 20:03 ` [PATCH v11 13/31] x86,fs/resctrl: Add and initialize rdt_resource for package scope monitor Tony Luck
2025-09-25 20:03 ` [PATCH v11 14/31] x86/resctrl: Discover hardware telemetry events Tony Luck
2025-10-03 23:35 ` Reinette Chatre
2025-10-06 18:19 ` Luck, Tony
2025-10-06 21:33 ` Reinette Chatre
2025-10-06 21:47 ` Luck, Tony
2025-10-07 20:47 ` Luck, Tony
2025-10-08 17:12 ` Reinette Chatre
2025-10-08 17:20 ` Luck, Tony
2025-09-25 20:03 ` [PATCH v11 15/31] x86,fs/resctrl: Fill in details of events for guid 0x26696143 and 0x26557651 Tony Luck
2025-09-25 20:03 ` [PATCH v11 16/31] x86,fs/resctrl: Add architectural event pointer Tony Luck
2025-10-03 23:38 ` Reinette Chatre
2025-09-25 20:03 ` [PATCH v11 17/31] x86/resctrl: Find and enable usable telemetry events Tony Luck
2025-10-03 23:52 ` Reinette Chatre
2025-10-06 19:58 ` Luck, Tony
2025-10-06 21:33 ` Reinette Chatre
2025-10-06 21:54 ` Luck, Tony
2025-09-25 20:03 ` [PATCH v11 18/31] fs/resctrl: Refactor L3 specific parts of __mon_event_count() Tony Luck
2025-10-03 23:56 ` Reinette Chatre
2025-09-25 20:03 ` [PATCH v11 19/31] x86/resctrl: Read telemetry events Tony Luck
2025-09-25 20:03 ` [PATCH v11 20/31] fs/resctrl: Refactor Sub-NUMA Cluster (SNC) in mkdir/rmdir code flow Tony Luck
2025-10-03 23:58 ` Reinette Chatre
2025-10-06 23:10 ` Luck, Tony
2025-10-08 17:12 ` Reinette Chatre
2025-10-08 21:15 ` Luck, Tony
2025-10-08 22:12 ` Reinette Chatre
2025-10-08 22:29 ` Luck, Tony
2025-10-09 2:16 ` Reinette Chatre
2025-10-09 17:45 ` Luck, Tony
2025-10-09 20:29 ` Reinette Chatre
2025-10-09 21:31 ` Luck, Tony
2025-10-09 21:46 ` Reinette Chatre
2025-10-09 22:08 ` Luck, Tony
2025-10-10 0:16 ` Reinette Chatre
2025-10-10 1:14 ` Luck, Tony
2025-10-10 1:54 ` Reinette Chatre
2025-09-25 20:03 ` [PATCH v11 21/31] x86/resctrl: Handle domain creation/deletion for RDT_RESOURCE_PERF_PKG Tony Luck
2025-10-04 0:00 ` Reinette Chatre
2025-09-25 20:03 ` [PATCH v11 22/31] x86/resctrl: Add energy/perf choices to rdt boot option Tony Luck
2025-09-25 20:03 ` [PATCH v11 23/31] x86/resctrl: Handle number of RMIDs supported by telemetry resources Tony Luck
2025-10-04 0:06 ` Reinette Chatre
2025-09-25 20:03 ` Tony Luck [this message]
2025-10-04 0:09 ` [PATCH v11 24/31] fs/resctrl: Move allocation/free of closid_num_dirty_rmid[] Reinette Chatre
2025-09-25 20:03 ` [PATCH v11 25/31] fs,x86/resctrl: Compute number of RMIDs as minimum across resources Tony Luck
2025-10-04 0:10 ` Reinette Chatre
2025-09-25 20:03 ` [PATCH v11 26/31] fs/resctrl: Move RMID initialization to first mount Tony Luck
2025-10-04 0:12 ` Reinette Chatre
2025-09-25 20:03 ` [PATCH v11 27/31] x86/resctrl: Enable RDT_RESOURCE_PERF_PKG Tony Luck
2025-10-04 0:23 ` Reinette Chatre
2025-09-25 20:03 ` [PATCH v11 28/31] fs/resctrl: Provide interface to create architecture specific debugfs area Tony Luck
2025-09-25 20:03 ` [PATCH v11 29/31] x86/resctrl: Add debugfs files to show telemetry aggregator status Tony Luck
2025-10-04 0:23 ` Reinette Chatre
2025-09-25 20:03 ` [PATCH v11 30/31] x86,fs/resctrl: Update Documentation for package events Tony Luck
2025-10-04 0:25 ` Reinette Chatre
2025-09-25 20:03 ` [PATCH v11 31/31] fs/resctrl: Some kerneldoc updates Tony Luck
2025-10-04 0:26 ` Reinette Chatre
2025-10-06 16:54 ` Luck, Tony
2025-10-06 21:34 ` Reinette Chatre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250925200328.64155-25-tony.luck@intel.com \
--to=tony.luck@intel.com \
--cc=Dave.Martin@arm.com \
--cc=babu.moger@amd.com \
--cc=dfustini@baylibre.com \
--cc=fenghuay@nvidia.com \
--cc=james.morse@arm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=maciej.wieczor-retman@intel.com \
--cc=patches@lists.linux.dev \
--cc=peternewman@google.com \
--cc=reinette.chatre@intel.com \
--cc=x86@kernel.org \
--cc=yu.c.chen@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).