From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: stable@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
patches@lists.linux.dev, Xiaowei Li <xiaowei.li@simcom.com>,
Johan Hovold <johan@kernel.org>
Subject: [PATCH 6.16 05/41] USB: serial: option: add SIMCom 8230C compositions
Date: Fri, 10 Oct 2025 15:15:53 +0200 [thread overview]
Message-ID: <20251010131333.619989224@linuxfoundation.org> (raw)
In-Reply-To: <20251010131333.420766773@linuxfoundation.org>
6.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Xiaowei Li <xiaowei.li@simcom.com>
commit 0e0ba0ecec3d6e819e0c2348331ff99afe2eb5d5 upstream.
Add support for SIMCom 8230C which is based on Qualcomm SDX35 chip.
USB Device Listings:
0x9071: tty (DM) + tty (NMEA) + tty (AT) + rmnet (QMI mode) + adb
T: Bus=01 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#= 10 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1e0e ProdID=9071 Rev= 5.15
S: Manufacturer=SIMCOM
S: Product=SDXBAAGHA-IDP _SN:D744C4C5
S: SerialNumber=0123456789ABCDEF
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E: Ad=86(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x9078: tty (DM) + tty (NMEA) + tty (AT) + ECM + adb
T: Bus=01 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#= 9 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1e0e ProdID=9078 Rev= 5.15
S: Manufacturer=SIMCOM
S: Product=SDXBAAGHA-IDP _SN:D744C4C5
S: SerialNumber=0123456789ABCDEF
C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E: Ad=86(I) Atr=03(Int.) MxPS= 16 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:* If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x907b: RNDIS + tty (DM) + tty (NMEA) + tty (AT) + adb
T: Bus=01 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#= 8 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1e0e ProdID=907b Rev= 5.15
S: Manufacturer=SIMCOM
S: Product=SDXBAAGHA-IDP _SN:D744C4C5
S: SerialNumber=0123456789ABCDEF
C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
A: FirstIf#= 0 IfCount= 2 Cls=ef(misc ) Sub=04 Prot=01
I:* If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Xiaowei Li <xiaowei.li@simcom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/option.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -2114,6 +2114,12 @@ static const struct usb_device_id option
{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9003, 0xff) }, /* Simcom SIM7500/SIM7600 MBIM mode */
{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9011, 0xff), /* Simcom SIM7500/SIM7600 RNDIS mode */
.driver_info = RSVD(7) },
+ { USB_DEVICE(0x1e0e, 0x9071), /* Simcom SIM8230 RMNET mode */
+ .driver_info = RSVD(3) | RSVD(4) },
+ { USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9078, 0xff), /* Simcom SIM8230 ECM mode */
+ .driver_info = RSVD(5) },
+ { USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x907b, 0xff), /* Simcom SIM8230 RNDIS mode */
+ .driver_info = RSVD(5) },
{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9205, 0xff) }, /* Simcom SIM7070/SIM7080/SIM7090 AT+ECM mode */
{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9206, 0xff) }, /* Simcom SIM7070/SIM7080/SIM7090 AT-only mode */
{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200),
next prev parent reply other threads:[~2025-10-10 13:19 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-10 13:15 [PATCH 6.16 00/41] 6.16.12-rc1 review Greg Kroah-Hartman
2025-10-10 13:15 ` [PATCH 6.16 01/41] ALSA: hda/tas2781: Fix the order of TAS2781 calibrated-data Greg Kroah-Hartman
2025-10-10 13:15 ` [PATCH 6.16 02/41] drm/amdgpu: Enable MES lr_compute_wa by default Greg Kroah-Hartman
2025-10-10 13:15 ` [PATCH 6.16 03/41] wifi: rtw89: mcc: stop TX during MCC prepare Greg Kroah-Hartman
2025-10-10 13:15 ` [PATCH 6.16 04/41] wifi: rtw89: fix use-after-free in rtw89_core_tx_kick_off_and_wait() Greg Kroah-Hartman
2025-10-10 13:15 ` Greg Kroah-Hartman [this message]
2025-10-10 13:15 ` [PATCH 6.16 06/41] Bluetooth: btusb: Add USB ID 2001:332a for D-Link AX9U rev. A1 Greg Kroah-Hartman
2025-10-10 13:15 ` [PATCH 6.16 07/41] wifi: rtlwifi: rtl8192cu: Dont claim USB ID 07b8:8188 Greg Kroah-Hartman
2025-10-10 13:15 ` [PATCH 6.16 08/41] wifi: rtl8xxxu: " Greg Kroah-Hartman
2025-10-10 13:15 ` [PATCH 6.16 09/41] rust: drm: fix `srctree/` links Greg Kroah-Hartman
2025-10-10 13:15 ` [PATCH 6.16 10/41] rust: block: " Greg Kroah-Hartman
2025-10-10 13:15 ` [PATCH 6.16 11/41] rust: pci: fix incorrect platform reference in PCI driver probe doc comment Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.16 12/41] gpiolib: acpi: Ignore touchpad wakeup on GPD G1619-05 Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.16 13/41] ASoC: rt712: avoid skipping the blind write Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.16 14/41] ASoC: amd: acp: Adjust pdm gain value Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.16 15/41] dm-integrity: limit MAX_TAG_SIZE to 255 Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.16 16/41] platform/x86/amd/pmc: Add MECHREVO Yilong15Pro to spurious_8042 list Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.16 17/41] platform/x86: oxpec: Add support for OneXPlayer X1Pro EVA-02 Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.16 18/41] perf subcmd: avoid crash in exclude_cmds when excludes is empty Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.16 19/41] drm/amdgpu/gfx11: Add Cleaner Shader Support for GFX11.0.1/11.0.4 GPUs Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.16 20/41] platform/x86/amd/pmf: Support new ACPI ID AMDI0108 Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.16 21/41] ASoC: rt5682s: Adjust SAR ADC button mode to fix noise issue Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.16 22/41] btrfs: ref-verify: handle damaged extent root tree Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.16 23/41] netfs: Prevent duplicate unlocking Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.16 24/41] iommufd: WARN if an object is aborted with an elevated refcount Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.16 25/41] can: hi311x: fix null pointer dereference when resuming from sleep before interface was enabled Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.16 26/41] can: rcar_canfd: Fix controller mode setting Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.16 27/41] platform/x86/amd/pmc: Add Stellaris Slim Gen6 AMD to spurious 8042 quirks list Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.16 28/41] hid: fix I2C read buffer overflow in raw_event() for mcp2221 Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.16 29/41] nvmem: layouts: fix automatic module loading Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.16 30/41] drivers/misc/amd-sbi/Kconfig: select REGMAP_I2C Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.16 31/41] binder: fix double-free in dbitmap Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.16 32/41] serial: stm32: allow selecting console when the driver is module Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.16 33/41] staging: axis-fifo: fix maximum TX packet length check Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.16 34/41] staging: axis-fifo: fix TX handling on copy_from_user() failure Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.16 35/41] staging: axis-fifo: flush RX FIFO on read errors Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.16 36/41] driver core: faux: Set power.no_pm for faux devices Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.16 37/41] driver core/PM: Set power.no_callbacks along with power.no_pm Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.16 38/41] crypto: rng - Ensure set_ent is always present Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.16 39/41] net/9p: fix double req put in p9_fd_cancelled Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.16 40/41] KVM: x86: Dont (re)check L1 intercepts when completing userspace I/O Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.16 41/41] ring buffer: Propagate __rb_map_vma return value to caller Greg Kroah-Hartman
2025-10-10 17:15 ` [PATCH 6.16 00/41] 6.16.12-rc1 review Jon Hunter
2025-10-10 19:48 ` Justin Forbes
2025-10-10 22:20 ` Shuah Khan
2025-10-11 7:32 ` Pavel Machek
2025-10-11 9:03 ` Naresh Kamboju
2025-10-11 10:51 ` Mark Brown
2025-10-11 11:37 ` Ron Economos
2025-10-11 16:56 ` Brett A C Sheffield
2025-10-11 20:34 ` Peter Schneider
2025-10-12 9:35 ` Miguel Ojeda
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251010131333.619989224@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=johan@kernel.org \
--cc=patches@lists.linux.dev \
--cc=stable@vger.kernel.org \
--cc=xiaowei.li@simcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).