[PATCH 6.6 000/196] 6.6.112-rc1 review

[PATCH 6.6 000/196] 6.6.112-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 6.6.112 release.
There are 196 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 15 Oct 2025 14:42:41 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.112-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 6.6.112-rc1

Miaoqian Lin <linmq006@gmail.com>
    usb: cdns3: cdnsp-pci: remove redundant pci_disable_device() call

Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
    arm64: dts: qcom: qcm2290: Disable USB SS bus instances in park mode

Sven Peter <sven@kernel.org>
    usb: typec: tipd: Clear interrupts first

Oleksij Rempel <o.rempel@pengutronix.de>
    net: usb: asix: hold PM usage ref to avoid PM/MDIO + RTNL deadlock

Salah Triki <salah.triki@gmail.com>
    bus: fsl-mc: Check return value of platform_get_resource()

Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
    pinctrl: check the return value of pinmux_ops::get_function_name()

Zhen Ni <zhen.ni@easystack.cn>
    remoteproc: pru: Fix potential NULL pointer dereference in pru_rproc_set_ctable()

Lei Lu <llfamsec@gmail.com>
    sunrpc: fix null pointer dereference on zero-length checksum

Zhen Ni <zhen.ni@easystack.cn>
    Input: uinput - zero-initialize uinput_ff_upload_compat to avoid info leak

Marek Vasut <marek.vasut@mailbox.org>
    Input: atmel_mxt_ts - allow reset GPIO to sleep

Ling Xu <quic_lxu5@quicinc.com>
    misc: fastrpc: Skip reference for DMA handles

Ling Xu <quic_lxu5@quicinc.com>
    misc: fastrpc: fix possible map leak in fastrpc_put_args

Ling Xu <quic_lxu5@quicinc.com>
    misc: fastrpc: Fix fastrpc_map_lookup operation

Guangshuo Li <lgs201920130244@gmail.com>
    nvdimm: ndtest: Return -ENOMEM if devm_kcalloc() fails in ndtest_probe()

Yang Shi <yang@os.amperecomputing.com>
    mm: hugetlb: avoid soft lockup when mprotect to large memory area

Jan Kara <jack@suse.cz>
    ext4: fix checks for orphan inodes

Matvey Kovalev <matvey.kovalev@ispras.ru>
    ksmbd: fix error code overwriting in smb2_get_info_filesystem()

Youling Tang <tangyouling@kylinos.cn>
    LoongArch: Automatically disable kaslr if boot from kexec_file

Zheng Qixing <zhengqixing@huawei.com>
    dm: fix NULL pointer dereference in __dm_suspend()

Zheng Qixing <zhengqixing@huawei.com>
    dm: fix queue start/stop imbalance under suspend/load/resume races

Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
    mfd: vexpress-sysreg: Check the return value of devm_gpiochip_add_data()

Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
    mfd: rz-mtu3: Fix MTU5 NFCR register offset

Deepak Sharma <deepak.sharma.472935@gmail.com>
    net: nfc: nci: Add parameter validation for packet data

Larshin Sergey <Sergey.Larshin@kaspersky.com>
    fs: udf: fix OOB read in lengthAllocDescs handling

Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
    ASoC: SOF: ipc3-topology: Fix multi-core and static pipelines tear down

Ma Ke <make24@iscas.ac.cn>
    ASoC: wcd934x: fix error handling in wcd934x_codec_parse_data()

Naman Jain <namjain@linux.microsoft.com>
    uio_hv_generic: Let userspace take care of interrupt mask

Phillip Lougher <phillip@squashfs.org.uk>
    Squashfs: fix uninit-value in squashfs_get_parent

Yazhou Tang <tangyazhou518@outlook.com>
    bpf: Reject negative offsets for ALU ops

zhang jiao <zhangjiao2@cmss.chinamobile.com>
    vhost: vringh: Modify the return value check

Jakub Kicinski <kuba@kernel.org>
    Revert "net/mlx5e: Update and set Xon/Xoff upon MTU set"

Enzo Matsumiya <ematsumiya@suse.de>
    smb: client: fix crypto buffers in non-linear memory

Moshe Shemesh <moshe@nvidia.com>
    net/mlx5: fw reset, add reset timeout work

Shay Drory <shayd@nvidia.com>
    net/mlx5: pagealloc: Fix reclaim race during command interface teardown

Moshe Shemesh <moshe@nvidia.com>
    net/mlx5: Stop polling for command response if interface goes down

Yeounsu Moon <yyyynoom@gmail.com>
    net: dlink: handle copy_thresh allocation failure

Kohei Enju <enjuk@amazon.com>
    net: ena: return 0 in ena_get_rxfh_key_size() when RSS hash key is not configurable

Kohei Enju <enjuk@amazon.com>
    nfp: fix RSS hash key size when RSS is not supported

Erick Karanja <karanja99erick@gmail.com>
    mtd: rawnand: atmel: Fix error handling path in atmel_nand_controller_add_nands

Donet Tom <donettom@linux.ibm.com>
    drivers/base/node: fix double free in register_one_node()

Dan Carpenter <dan.carpenter@linaro.org>
    ocfs2: fix double free in user_cluster_connect()

Nishanth Menon <nm@ti.com>
    hwrng: ks-sa - fix division by zero in ks_sa_rng_init

Fan Wu <wufan@kernel.org>
    KEYS: X.509: Fix Basic Constraints CA flag parsing

Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
    Bluetooth: hci_sync: Fix using random address for BIG/PA advertisements

Pauli Virtanen <pav@iki.fi>
    Bluetooth: ISO: don't leak skb in ISO_CONT RX

Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
    Bluetooth: ISO: Fix possible UAF on iso_conn_free

Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
    Bluetooth: MGMT: Fix not exposing debug UUID on MGMT_OP_READ_EXP_FEATURES_INFO

Michael S. Tsirkin <mst@redhat.com>
    vhost: vringh: Fix copy_to_iter return value check

I Viswanath <viswanathiyyappan@gmail.com>
    net: usb: Remove disruptive netif_wake_queue in rtl8150_set_multicast

Bernard Metzler <bernard.metzler@linux.dev>
    RDMA/siw: Always report immediate post SQ errors

Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
    usb: vhci-hcd: Prevent suspending virtually attached devices

Ranjan Kumar <ranjan.kumar@broadcom.com>
    scsi: mpt3sas: Fix crash in transport port remove by using ioc_info()

Slavin Liu <slavin452@gmail.com>
    ipvs: Defer ip_vs_ftp unregister during netns cleanup

Anthony Iliopoulos <ailiop@suse.com>
    NFSv4.1: fix backchannel max_resp_sz verification check

Leo Yan <leo.yan@arm.com>
    coresight: trbe: Return NULL pointer for allocation failures

Leo Yan <leo.yan@arm.com>
    coresight: etm4x: Support atclk

Yuanfang Zhang <yuanfang.zhang@oss.qualcomm.com>
    coresight-etm4x: Conditionally access register TRCEXTINSELR

Stephan Gerhold <stephan.gerhold@linaro.org>
    remoteproc: qcom: q6v5: Avoid disabling handover IRQ twice

Nagarjuna Kristam <nkristam@nvidia.com>
    PCI: tegra194: Fix duplicate PLL disable in pex_ep_event_pex_rst_assert()

Fedor Pchelkin <pchelkin@ispras.ru>
    wifi: rtw89: avoid circular locking dependency in ser_state_run()

Gui-Dong Han <hanguidong02@gmail.com>
    RDMA/rxe: Fix race in do_task() when draining

Chenghai Huang <huangchenghai2@huawei.com>
    crypto: hisilicon/qm - set NULL to qm->debug.qm_diff_regs

Zilin Guan <zilin@seu.edu.cn>
    vfio/pds: replace bitmap_free with vfree

Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
    sparc: fix accurate exception reporting in copy_{from,to}_user for M7

Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
    sparc: fix accurate exception reporting in copy_to_user for Niagara 4

Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
    sparc: fix accurate exception reporting in copy_{from_to}_user for Niagara

Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
    sparc: fix accurate exception reporting in copy_{from_to}_user for UltraSPARC III

Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
    sparc: fix accurate exception reporting in copy_{from_to}_user for UltraSPARC

Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
    wifi: mac80211: fix Rx packet handling when pubsta information is not available

Baochen Qiang <baochen.qiang@oss.qualcomm.com>
    wifi: ath10k: avoid unnecessary wait for service ready message

Bagas Sanjaya <bagasdotme@gmail.com>
    Documentation: trace: historgram-design: Separate sched_waking histogram section heading and the following diagram

Vlad Dumitrescu <vdumitrescu@nvidia.com>
    IB/sa: Fix sa_local_svc_timeout_ms read race

Parav Pandit <parav@nvidia.com>
    RDMA/core: Resolve MAC of next-hop device without ARP support

Michal Pecio <michal.pecio@gmail.com>
    Revert "usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running"

wangzijie <wangzijie1@honor.com>
    f2fs: fix zero-sized extent for precache extents

Qianfeng Rong <rongqianfeng@vivo.com>
    scsi: qla2xxx: Fix incorrect sign of error code in qla_nvme_xmt_ls_rsp()

Qianfeng Rong <rongqianfeng@vivo.com>
    scsi: qla2xxx: Fix incorrect sign of error code in START_SP_W_RETRIES()

Qianfeng Rong <rongqianfeng@vivo.com>
    scsi: qla2xxx: edif: Fix incorrect sign of error code

Colin Ian King <colin.i.king@gmail.com>
    ACPI: NFIT: Fix incorrect ndr_desc being reportedin dev_err message

Chao Yu <chao@kernel.org>
    f2fs: fix to mitigate overhead of f2fs_zero_post_eof_page()

Chao Yu <chao@kernel.org>
    f2fs: fix to truncate first page in error path of f2fs_truncate()

Chao Yu <chao@kernel.org>
    f2fs: fix to update map->m_next_extent correctly in f2fs_map_blocks()

Abdun Nihaal <abdun.nihaal@gmail.com>
    wifi: mt76: fix potential memory leak in mt76_wmac_probe()

Håkon Bugge <haakon.bugge@oracle.com>
    RDMA/cm: Rate limit destroy CM ID timeout error message

Donet Tom <donettom@linux.ibm.com>
    drivers/base/node: handle error properly in register_one_node()

Christophe Leroy <christophe.leroy@csgroup.eu>
    watchdog: mpc8xxx_wdt: Reload the watchdog timer when enabling the watchdog

Zhang Tengfei <zhtfdev@gmail.com>
    ipvs: Use READ_ONCE/WRITE_ONCE for ipvs->enable

Zhen Ni <zhen.ni@easystack.cn>
    netfilter: ipset: Remove unused htable_bits in macro ahash_region

Hans de Goede <hansg@kernel.org>
    iio: consumers: Fix offset handling in iio_convert_raw_to_processed()

Hans de Goede <hansg@kernel.org>
    iio: consumers: Fix handling of negative channel scale in iio_convert_raw_to_processed()

Moon Hee Lee <moonhee.lee.ca@gmail.com>
    fs/ntfs3: reject index allocation if $BITMAP is empty but blocks exist

Vitaly Grigoryev <Vitaly.Grigoryev@kaspersky.com>
    fs: ntfs3: Fix integer overflow in run_unpack()

Qianfeng Rong <rongqianfeng@vivo.com>
    drm/msm/dpu: fix incorrect type for ret

Takashi Iwai <tiwai@suse.de>
    ASoC: Intel: bytcr_rt5651: Fix invalid quirk input mapping

Takashi Iwai <tiwai@suse.de>
    ASoC: Intel: bytcr_rt5640: Fix invalid quirk input mapping

Takashi Iwai <tiwai@suse.de>
    ASoC: Intel: bytcht_es8316: Fix invalid quirk input mapping

Wang Liang <wangliang74@huawei.com>
    pps: fix warning in pps_register_cdev when register device fail

Colin Ian King <colin.i.king@gmail.com>
    misc: genwqe: Fix incorrect cmd field being reported in error

Seppo Takalo <seppo.takalo@nordicsemi.no>
    tty: n_gsm: Don't block input queue by waiting MSC

William Wu <william.wu@rock-chips.com>
    usb: gadget: configfs: Correctly set use_os_string at bind

Xichao Zhao <zhao.xichao@vivo.com>
    usb: phy: twl6030: Fix incorrect type for ret

Qianfeng Rong <rongqianfeng@vivo.com>
    drm/amdkfd: Fix error code sign for EINVAL in svm_ioctl()

Eric Dumazet <edumazet@google.com>
    tcp: fix __tcp_close() to only send RST when required

Alok Tiwari <alok.a.tiwari@oracle.com>
    PCI: tegra: Fix devm_kcalloc() argument order for port->phys allocation

Stefan Kerkmann <s.kerkmann@pengutronix.de>
    wifi: mwifiex: send world regulatory domain to driver

Timur Kristóf <timur.kristof@gmail.com>
    drm/amd/pm: Disable SCLK switching on Oland with high pixel clocks (v3)

Timur Kristóf <timur.kristof@gmail.com>
    drm/amd/pm: Disable MCLK switching with non-DC at 120 Hz+ (v2)

Timur Kristóf <timur.kristof@gmail.com>
    drm/amd/pm: Treat zero vblank time as too short in si_dpm (v3)

Timur Kristóf <timur.kristof@gmail.com>
    drm/amd/pm: Adjust si_upload_smc_data register programming (v3)

Timur Kristóf <timur.kristof@gmail.com>
    drm/amd/pm: Fix si_upload_smc_data (v3)

Timur Kristóf <timur.kristof@gmail.com>
    drm/amd/pm: Disable ULV even if unsupported (v3)

Timur Kristóf <timur.kristof@gmail.com>
    drm/amdgpu: Power up UVD 3 for FW validation (v2)

Yuanfang Zhang <quic_yuanfang@quicinc.com>
    coresight: Only register perf symlink for sinks with alloc_buffer

Eric Dumazet <edumazet@google.com>
    inet: ping: check sock_net() in ping_get_port() and ping_lookup()

Zhushuai Yin <yinzhushuai@huawei.com>
    crypto: hisilicon/qm - check whether the input function and PF are on the same device

Chenghai Huang <huangchenghai2@huawei.com>
    crypto: hisilicon - re-enable address prefetch after device resuming

Chenghai Huang <huangchenghai2@huawei.com>
    crypto: hisilicon/zip - remove unnecessary validation for high-performance mode configurations

Arnd Bergmann <arnd@arndb.de>
    media: st-delta: avoid excessive stack usage

Qianfeng Rong <rongqianfeng@vivo.com>
    ALSA: lx_core: use int type to store negative error codes

Patrisious Haddad <phaddad@nvidia.com>
    RDMA/mlx5: Fix vport loopback forcing for MPV device

Zhang Shurong <zhang_shurong@foxmail.com>
    media: rj54n1cb0c: Fix memleak in rj54n1_probe()

Thomas Fourier <fourier.thomas@gmail.com>
    scsi: myrs: Fix dma_alloc_coherent() error check

Niklas Cassel <cassel@kernel.org>
    scsi: pm80xx: Fix array-index-out-of-of-bounds on rmmod

Arnd Bergmann <arnd@arndb.de>
    hwrng: nomadik - add ARM_AMBA dependency

Thomas Fourier <fourier.thomas@gmail.com>
    crypto: keembay - Add missing check after sg_nents_for_len()

Liao Yuanhong <liaoyuanhong@vivo.com>
    drm/amd/display: Remove redundant semicolons

Dan Carpenter <dan.carpenter@linaro.org>
    serial: max310x: Add error checking in probe()

Komal Bajaj <komal.bajaj@oss.qualcomm.com>
    usb: misc: qcom_eud: Access EUD_MODE_MANAGER2 through secure calls

Dan Carpenter <dan.carpenter@linaro.org>
    usb: host: max3421-hcd: Fix error pointer dereference in probe cleanup

Jonas Karlman <jonas@kwiboo.se>
    phy: rockchip: naneng-combphy: Enable U3 OTG port for RK3568

Jacopo Mondi <jacopo.mondi@ideasonboard.com>
    media: zoran: Remove zoran_fh structure

Chia-I Wu <olvaffe@gmail.com>
    drm/bridge: it6505: select REGMAP_I2C

Chao Yu <chao@kernel.org>
    f2fs: fix condition in __allow_reserved_blocks()

Brahmajit Das <listout@listout.xyz>
    drm/radeon/r600_cs: clean up of dead code in r600_cs

Brigham Campbell <me@brighamcampbell.com>
    drm/panel: novatek-nt35560: Fix invalid return value

Daniel Borkmann <daniel@iogearbox.net>
    bpf: Enforce expected_attach_type for tailcall compatibility

Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
    i2c: designware: Add disabling clocks when probe fails

Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
    i2c: designware: Fix clock issue when PM is disabled

Leilk.Liu <leilk.liu@mediatek.com>
    i2c: mediatek: fix potential incorrect use of I2C_MASTER_WRRD

Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
    thermal/drivers/qcom/lmh: Add missing IRQ includes

Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
    thermal/drivers/qcom: Make LMH select QCOM_SCM

Vadim Pasternak <vadimp@nvidia.com>
    hwmon: (mlxreg-fan) Separate methods of fan setting coming from different subsystems

Qi Xi <xiqi2@huawei.com>
    once: fix race by moving DO_ONCE to separate section

Zhouyi Zhou <zhouzhouyi@gmail.com>
    tools/nolibc: make time_t robust if __kernel_old_time_t is missing in host headers

Rafael J. Wysocki <rafael.j.wysocki@intel.com>
    smp: Fix up and expand the smp_call_function_many() kerneldoc

Paul Chaignon <paul.chaignon@gmail.com>
    bpf: Explicitly check accesses to bpf_sock_addr

Akhilesh Patil <akhilesh@ee.iitb.ac.in>
    selftests: watchdog: skip ping loop if WDIOF_KEEPALIVEPING not supported

Stanley Chu <stanley.chuys@gmail.com>
    i3c: master: svc: Recycle unused IBI slot

Stanley Chu <yschu@nuvoton.com>
    i3c: master: svc: Use manual response for IBI events

Daniel Wagner <wagi@kernel.org>
    nvmet-fc: move lsop put work to nvmet_fc_ls_req_op

Dmitry Antipov <dmantipov@yandex.ru>
    ACPICA: Fix largest possible resource descriptor index

Uwe Kleine-König <u.kleine-koenig@baylibre.com>
    pwm: tiehrpwm: Fix corner case in clock divisor calculation

AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
    arm64: dts: mediatek: mt8516-pumpkin: Fix machine compatible

AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
    arm64: dts: mediatek: mt6795-xperia-m5: Fix mmc0 latch-ck value

AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
    arm64: dts: mediatek: mt6331: Fix pmic, regulators, rtc, keys node names

Johan Hovold <johan@kernel.org>
    cpuidle: qcom-spm: fix device and OF node leaks at probe

Johan Hovold <johan@kernel.org>
    firmware: firmware: meson-sm: fix compile-test default

Eric Dumazet <edumazet@google.com>
    nbd: restrict sockets to TCP and UDP

Guoqing Jiang <guoqing.jiang@canonical.com>
    arm64: dts: mediatek: mt8195: Remove suspend-breaking reset from pcie0

Genjian Zhang <zhanggenjian@kylinos.cn>
    null_blk: Fix the description of the cache_size module argument

Qianfeng Rong <rongqianfeng@vivo.com>
    pinctrl: renesas: Use int type to store negative error codes

Andy Yan <andyshrk@163.com>
    power: supply: cw2015: Fix a alignment coding style issue

Dan Carpenter <dan.carpenter@linaro.org>
    PM / devfreq: mtk-cci: Fix potential error pointer dereference in probe()

Jihed Chaibi <jihed.chaibi.dev@gmail.com>
    ARM: dts: omap: am335x-cm-t335: Remove unused mcasp num-serializer property

Jihed Chaibi <jihed.chaibi.dev@gmail.com>
    ARM: dts: ti: omap: omap3-devkit8000-lcd: Fix ti,keep-vref-on property to use correct boolean syntax in DTS

Jihed Chaibi <jihed.chaibi.dev@gmail.com>
    ARM: dts: ti: omap: am335x-baltos: Fix ti,en-ck32k-xtal property in DTS to use correct boolean syntax

Rafael J. Wysocki <rafael.j.wysocki@intel.com>
    PM: sleep: core: Clear power.must_resume in noirq suspend error path

Qianfeng Rong <rongqianfeng@vivo.com>
    block: use int to store blk_stack_limits() return value

Benjamin Berg <benjamin.berg@intel.com>
    selftests/nolibc: fix EXPECT_NZ macro

Qianfeng Rong <rongqianfeng@vivo.com>
    regulator: scmi: Use int type to store negative error codes

Janne Grunau <j@jannau.net>
    arm64: dts: apple: t8103-j457: Fix PCIe ethernet iommu-map

Nicolas Ferre <nicolas.ferre@microchip.com>
    ARM: at91: pm: fix MCKx restore routine

Li Nan <linan122@huawei.com>
    blk-mq: check kobject state_in_sysfs before deleting in blk_mq_unregister_hctx

Da Xue <da@libre.computer>
    pinctrl: meson-gxl: add missing i2c_d pinmux

Sneh Mankad <sneh.mankad@oss.qualcomm.com>
    soc: qcom: rpmh-rsc: Unconditionally clear _TRIGGER bit for TCS

Huisong Li <lihuisong@huawei.com>
    ACPI: processor: idle: Fix memory leak when register cpuidle device failed

Florian Fainelli <florian.fainelli@broadcom.com>
    cpufreq: scmi: Account for malformed DT in scmi_dev_used_by_cpus()

Ilya Leoshkevich <iii@linux.ibm.com>
    s390/bpf: Write back tail call counter for BPF_TRAMP_F_CALL_ORIG

Ilya Leoshkevich <iii@linux.ibm.com>
    s390/bpf: Write back tail call counter for BPF_PSEUDO_CALL

Fenglin Wu <fenglin.wu@oss.qualcomm.com>
    leds: flash: leds-qcom-flash: Update torch current clamp setting

Geert Uytterhoeven <geert+renesas@glider.be>
    ARM: dts: renesas: porter: Fix CAN pin group

Yureka Lilian <yuka@yuka.dev>
    libbpf: Fix reuse of DEVMAP

Tao Chen <chen.dylane@linux.dev>
    bpf: Remove migrate_disable in kprobe_multi_link_prog_run

Matt Bobrowski <mattbobrowski@google.com>
    bpf/selftests: Fix test_tcpnotify_user

Geert Uytterhoeven <geert+renesas@glider.be>
    regmap: Remove superfluous check for !config in __regmap_init()

Biju Das <biju.das.jz@bp.renesas.com>
    arm64: dts: renesas: rzg2lc-smarc: Disable CAN-FD channel0

Uros Bizjak <ubizjak@gmail.com>
    x86/vdso: Fix output operand size of RDPID

Qiuxu Zhuo <qiuxu.zhuo@intel.com>
    EDAC/i10nm: Skip DIMM enumeration on a disabled memory controller

Stefan Metzmacher <metze@samba.org>
    smb: server: fix IRD/ORD negotiation with the client

Leo Yan <leo.yan@arm.com>
    perf: arm_spe: Prevent overflow in PERF_IDX2OFF()

Leo Yan <leo.yan@arm.com>
    coresight: trbe: Prevent overflow in PERF_IDX2OFF()

Andreas Gruenbacher <agruenba@redhat.com>
    gfs2: Fix GLF_INVALIDATE_IN_PROGRESS flag clearing in do_xmote

Bala-Vignesh-Reddy <reddybalavignesh9979@gmail.com>
    selftests: arm64: Check fread return value in exec_target

Johannes Nixdorf <johannes@nixdorf.dev>
    seccomp: Fix a race with WAIT_KILLABLE_RECV if the tracer replies too fast

Geert Uytterhoeven <geert+renesas@glider.be>
    init: INITRAMFS_PRESERVE_MTIME should depend on BLK_DEV_INITRD

Jeff Layton <jlayton@kernel.org>
    filelock: add FL_RECLAIM to show_fl_flags() macro


-------------

Diffstat:

 Documentation/trace/histogram-design.rst           |   4 +-
 Makefile                                           |   4 +-
 arch/arm/boot/dts/renesas/r8a7791-porter.dts       |   2 +-
 arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi       |   2 +-
 arch/arm/boot/dts/ti/omap/am335x-cm-t335.dts       |   2 -
 .../dts/ti/omap/omap3-devkit8000-lcd-common.dtsi   |   2 +-
 arch/arm/mach-at91/pm_suspend.S                    |   4 +-
 arch/arm64/boot/dts/apple/t8103-j457.dts           |  12 +-
 arch/arm64/boot/dts/mediatek/mt6331.dtsi           |  10 +-
 .../boot/dts/mediatek/mt6795-sony-xperia-m5.dts    |   2 +-
 arch/arm64/boot/dts/mediatek/mt8195.dtsi           |   3 -
 arch/arm64/boot/dts/mediatek/mt8516-pumpkin.dts    |   2 +-
 arch/arm64/boot/dts/qcom/qcm2290.dtsi              |   1 +
 arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi      |   5 +-
 arch/loongarch/kernel/relocate.c                   |   4 +
 arch/s390/net/bpf_jit_comp.c                       |  26 ++--
 arch/sparc/lib/M7memcpy.S                          |  20 +--
 arch/sparc/lib/Memcpy_utils.S                      |   9 ++
 arch/sparc/lib/NG4memcpy.S                         |   2 +-
 arch/sparc/lib/NGmemcpy.S                          |  29 +++--
 arch/sparc/lib/U1memcpy.S                          |  19 +--
 arch/sparc/lib/U3memcpy.S                          |   2 +-
 arch/x86/include/asm/segment.h                     |   8 +-
 block/blk-mq-sysfs.c                               |   6 +-
 block/blk-settings.c                               |   3 +-
 crypto/asymmetric_keys/x509_cert_parser.c          |  16 ++-
 drivers/acpi/acpica/aclocal.h                      |   2 +-
 drivers/acpi/nfit/core.c                           |   2 +-
 drivers/acpi/processor_idle.c                      |   3 +
 drivers/base/node.c                                |   4 +
 drivers/base/power/main.c                          |  14 ++-
 drivers/base/regmap/regmap.c                       |   2 +-
 drivers/block/nbd.c                                |   8 ++
 drivers/block/null_blk/main.c                      |   2 +-
 drivers/bus/fsl-mc/fsl-mc-bus.c                    |   3 +
 drivers/char/hw_random/Kconfig                     |   1 +
 drivers/char/hw_random/ks-sa-rng.c                 |   4 +
 drivers/cpufreq/scmi-cpufreq.c                     |  10 ++
 drivers/cpuidle/cpuidle-qcom-spm.c                 |   7 +-
 drivers/crypto/hisilicon/debugfs.c                 |   1 +
 drivers/crypto/hisilicon/hpre/hpre_main.c          |   3 +-
 drivers/crypto/hisilicon/qm.c                      |   7 +-
 drivers/crypto/hisilicon/sec2/sec_main.c           |  80 ++++++------
 drivers/crypto/hisilicon/zip/zip_main.c            |  17 +--
 .../crypto/intel/keembay/keembay-ocs-hcu-core.c    |   5 +-
 drivers/devfreq/mtk-cci-devfreq.c                  |   3 +-
 drivers/edac/i10nm_base.c                          |  14 +++
 drivers/firmware/meson/Kconfig                     |   2 +-
 drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c              |  29 ++++-
 drivers/gpu/drm/amd/amdkfd/kfd_svm.c               |   2 +-
 .../display/dc/dml/dcn32/display_rq_dlg_calc_32.c  |   1 -
 drivers/gpu/drm/amd/pm/amdgpu_dpm_internal.c       |   7 ++
 drivers/gpu/drm/amd/pm/legacy-dpm/si_dpm.c         |  92 +++++++++-----
 drivers/gpu/drm/bridge/Kconfig                     |   1 +
 .../gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c    |   2 +-
 drivers/gpu/drm/panel/panel-novatek-nt35560.c      |   2 +-
 drivers/gpu/drm/radeon/r600_cs.c                   |   4 +-
 drivers/hwmon/mlxreg-fan.c                         |  24 ++--
 drivers/hwtracing/coresight/coresight-core.c       |   5 +-
 drivers/hwtracing/coresight/coresight-etm4x-core.c |  31 +++--
 drivers/hwtracing/coresight/coresight-etm4x.h      |   6 +-
 drivers/hwtracing/coresight/coresight-trbe.c       |   9 +-
 drivers/i2c/busses/i2c-designware-platdrv.c        |   5 +-
 drivers/i2c/busses/i2c-mt65xx.c                    |  17 +--
 drivers/i3c/master/svc-i3c-master.c                |  31 ++++-
 drivers/iio/inkern.c                               |  30 ++---
 drivers/infiniband/core/addr.c                     |  10 +-
 drivers/infiniband/core/cm.c                       |   4 +-
 drivers/infiniband/core/sa_query.c                 |   6 +-
 drivers/infiniband/hw/mlx5/main.c                  |  19 ++-
 drivers/infiniband/hw/mlx5/mlx5_ib.h               |   1 +
 drivers/infiniband/sw/rxe/rxe_task.c               |   8 +-
 drivers/infiniband/sw/siw/siw_verbs.c              |  25 ++--
 drivers/input/misc/uinput.c                        |   1 +
 drivers/input/touchscreen/atmel_mxt_ts.c           |   2 +-
 drivers/leds/flash/leds-qcom-flash.c               |  62 ++++++----
 drivers/md/dm-core.h                               |   1 +
 drivers/md/dm.c                                    |  13 +-
 drivers/media/i2c/rj54n1cb0c.c                     |   9 +-
 drivers/media/pci/zoran/zoran.h                    |   6 -
 drivers/media/pci/zoran/zoran_driver.c             |   3 +-
 .../media/platform/st/sti/delta/delta-mjpeg-dec.c  |  20 +--
 drivers/mfd/rz-mtu3.c                              |   2 +-
 drivers/mfd/vexpress-sysreg.c                      |   6 +-
 drivers/misc/fastrpc.c                             |  62 ++++++----
 drivers/misc/genwqe/card_ddcb.c                    |   2 +-
 drivers/mtd/nand/raw/atmel/nand-controller.c       |   4 +-
 drivers/net/ethernet/amazon/ena/ena_ethtool.c      |   5 +-
 drivers/net/ethernet/dlink/dl2k.c                  |   7 +-
 drivers/net/ethernet/mellanox/mlx5/core/cmd.c      |   6 +-
 .../ethernet/mellanox/mlx5/core/en/port_buffer.h   |  12 --
 drivers/net/ethernet/mellanox/mlx5/core/en_main.c  |  17 +--
 drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c |  24 ++++
 .../net/ethernet/mellanox/mlx5/core/pagealloc.c    |   7 +-
 .../net/ethernet/netronome/nfp/nfp_net_ethtool.c   |   2 +-
 drivers/net/usb/asix_devices.c                     |  29 +++++
 drivers/net/usb/rtl8150.c                          |   2 -
 drivers/net/wireless/ath/ath10k/wmi.c              |  39 +++---
 drivers/net/wireless/marvell/mwifiex/cfg80211.c    |   7 +-
 drivers/net/wireless/mediatek/mt76/mt7603/soc.c    |   2 +-
 drivers/net/wireless/realtek/rtw89/ser.c           |   3 +-
 drivers/nvme/target/fc.c                           |  19 ++-
 drivers/pci/controller/dwc/pcie-tegra194.c         |   4 +-
 drivers/pci/controller/pci-tegra.c                 |   2 +-
 drivers/perf/arm_spe_pmu.c                         |   3 +-
 drivers/phy/rockchip/phy-rockchip-naneng-combphy.c |  12 ++
 drivers/pinctrl/meson/pinctrl-meson-gxl.c          |  10 ++
 drivers/pinctrl/pinmux.c                           |   2 +-
 drivers/pinctrl/renesas/pinctrl.c                  |   3 +-
 drivers/power/supply/cw2015_battery.c              |   3 +-
 drivers/pps/kapi.c                                 |   5 +-
 drivers/pps/pps.c                                  |   5 +-
 drivers/pwm/pwm-tiehrpwm.c                         |   4 +-
 drivers/regulator/scmi-regulator.c                 |   3 +-
 drivers/remoteproc/pru_rproc.c                     |   3 +-
 drivers/remoteproc/qcom_q6v5.c                     |   3 -
 drivers/scsi/mpt3sas/mpt3sas_transport.c           |   8 +-
 drivers/scsi/myrs.c                                |   8 +-
 drivers/scsi/pm8001/pm8001_sas.c                   |   9 +-
 drivers/scsi/qla2xxx/qla_edif.c                    |   4 +-
 drivers/scsi/qla2xxx/qla_init.c                    |   4 +-
 drivers/scsi/qla2xxx/qla_nvme.c                    |   2 +-
 drivers/soc/qcom/rpmh-rsc.c                        |   7 +-
 drivers/thermal/qcom/Kconfig                       |   3 +-
 drivers/thermal/qcom/lmh.c                         |   2 +
 drivers/tty/n_gsm.c                                |  25 +++-
 drivers/tty/serial/max310x.c                       |   2 +
 drivers/uio/uio_hv_generic.c                       |   7 +-
 drivers/usb/cdns3/cdnsp-pci.c                      |   5 +-
 drivers/usb/gadget/configfs.c                      |   2 +
 drivers/usb/host/max3421-hcd.c                     |   2 +-
 drivers/usb/host/xhci-ring.c                       |  11 +-
 drivers/usb/misc/Kconfig                           |   1 +
 drivers/usb/misc/qcom_eud.c                        |  33 +++--
 drivers/usb/phy/phy-twl6030-usb.c                  |   3 +-
 drivers/usb/typec/tipd/core.c                      |  24 ++--
 drivers/usb/usbip/vhci_hcd.c                       |  22 ++++
 drivers/vfio/pci/pds/dirty.c                       |   2 +-
 drivers/vhost/vringh.c                             |  14 ++-
 drivers/watchdog/mpc8xxx_wdt.c                     |   2 +
 fs/ext4/ext4.h                                     |  10 ++
 fs/ext4/file.c                                     |   2 +-
 fs/ext4/inode.c                                    |   2 +-
 fs/ext4/orphan.c                                   |   6 +-
 fs/ext4/super.c                                    |   4 +-
 fs/f2fs/data.c                                     |   9 +-
 fs/f2fs/f2fs.h                                     |   4 +-
 fs/f2fs/file.c                                     |  49 ++++----
 fs/gfs2/glock.c                                    |   2 -
 fs/nfs/nfs4proc.c                                  |   2 +-
 fs/ntfs3/index.c                                   |  10 ++
 fs/ntfs3/run.c                                     |  12 +-
 fs/ocfs2/stack_user.c                              |   1 +
 fs/smb/client/smb2ops.c                            |  17 +--
 fs/smb/server/smb2pdu.c                            |   3 +-
 fs/smb/server/transport_rdma.c                     |  97 +++++++++++++--
 fs/squashfs/inode.c                                |   7 ++
 fs/squashfs/squashfs_fs_i.h                        |   2 +-
 fs/udf/inode.c                                     |   3 +
 include/asm-generic/vmlinux.lds.h                  |   1 +
 include/linux/bpf.h                                |   1 +
 include/linux/once.h                               |   4 +-
 include/trace/events/filelock.h                    |   3 +-
 init/Kconfig                                       |   1 +
 kernel/bpf/core.c                                  |   5 +
 kernel/bpf/verifier.c                              |   4 +-
 kernel/seccomp.c                                   |  12 +-
 kernel/smp.c                                       |  11 +-
 kernel/trace/bpf_trace.c                           |   9 +-
 mm/hugetlb.c                                       |   2 +
 net/bluetooth/hci_sync.c                           |  10 +-
 net/bluetooth/iso.c                                |   9 +-
 net/bluetooth/mgmt.c                               |  10 +-
 net/core/filter.c                                  |  16 ++-
 net/ipv4/ping.c                                    |  14 ++-
 net/ipv4/tcp.c                                     |   9 +-
 net/mac80211/rx.c                                  |  28 ++++-
 net/netfilter/ipset/ip_set_hash_gen.h              |   8 +-
 net/netfilter/ipvs/ip_vs_conn.c                    |   4 +-
 net/netfilter/ipvs/ip_vs_core.c                    |  11 +-
 net/netfilter/ipvs/ip_vs_ctl.c                     |   6 +-
 net/netfilter/ipvs/ip_vs_est.c                     |  16 +--
 net/netfilter/ipvs/ip_vs_ftp.c                     |   4 +-
 net/nfc/nci/ntf.c                                  | 135 +++++++++++++++------
 net/sunrpc/auth_gss/svcauth_gss.c                  |   2 +-
 sound/pci/lx6464es/lx_core.c                       |   4 +-
 sound/soc/codecs/wcd934x.c                         |  17 ++-
 sound/soc/intel/boards/bytcht_es8316.c             |  20 ++-
 sound/soc/intel/boards/bytcr_rt5640.c              |   7 +-
 sound/soc/intel/boards/bytcr_rt5651.c              |  26 +++-
 sound/soc/sof/ipc3-topology.c                      |  10 +-
 tools/include/nolibc/std.h                         |   2 +-
 tools/lib/bpf/libbpf.c                             |  10 ++
 tools/testing/nvdimm/test/ndtest.c                 |  13 +-
 tools/testing/selftests/arm64/pauth/exec_target.c  |   7 +-
 .../selftests/bpf/progs/test_tcpnotify_kern.c      |   1 -
 tools/testing/selftests/bpf/test_tcpnotify_user.c  |  20 +--
 tools/testing/selftests/nolibc/nolibc-test.c       |   4 +-
 tools/testing/selftests/watchdog/watchdog-test.c   |   6 +
 199 files changed, 1405 insertions(+), 721 deletions(-)

[PATCH 6.6 001/196] filelock: add FL_RECLAIM to show_fl_flags() macro

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jeff Layton <jlayton@kernel.org>

[ Upstream commit c593b9d6c446510684da400833f9d632651942f0 ]

Show the FL_RECLAIM flag symbolically in tracepoints.

Fixes: bb0a55bb7148 ("nfs: don't allow reexport reclaims")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/20250903-filelock-v1-1-f2926902962d@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/trace/events/filelock.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/include/trace/events/filelock.h b/include/trace/events/filelock.h
index 1646dadd7f37c..3b1c8d93b2654 100644
--- a/include/trace/events/filelock.h
+++ b/include/trace/events/filelock.h
@@ -27,7 +27,8 @@
 		{ FL_SLEEP,		"FL_SLEEP" },			\
 		{ FL_DOWNGRADE_PENDING,	"FL_DOWNGRADE_PENDING" },	\
 		{ FL_UNLOCK_PENDING,	"FL_UNLOCK_PENDING" },		\
-		{ FL_OFDLCK,		"FL_OFDLCK" })
+		{ FL_OFDLCK,		"FL_OFDLCK" },			\
+		{ FL_RECLAIM,		"FL_RECLAIM"})
 
 #define show_fl_type(val)				\
 	__print_symbolic(val,				\
-- 
2.51.0

[PATCH 6.6 002/196] init: INITRAMFS_PRESERVE_MTIME should depend on BLK_DEV_INITRD

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 74792608606a525a0e0df7e8d48acd8000561389 ]

INITRAMFS_PRESERVE_MTIME is only used in init/initramfs.c and
init/initramfs_test.c.  Hence add a dependency on BLK_DEV_INITRD, to
prevent asking the user about this feature when configuring a kernel
without initramfs support.

Fixes: 1274aea127b2e8c9 ("initramfs: add INITRAMFS_PRESERVE_MTIME Kconfig option")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 init/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/init/Kconfig b/init/Kconfig
index 8b630143c720f..461591503bf43 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -1367,6 +1367,7 @@ config BOOT_CONFIG_EMBED_FILE
 
 config INITRAMFS_PRESERVE_MTIME
 	bool "Preserve cpio archive mtimes in initramfs"
+	depends on BLK_DEV_INITRD
 	default y
 	help
 	  Each entry in an initramfs cpio archive carries an mtime value. When
-- 
2.51.0

[PATCH 6.6 003/196] seccomp: Fix a race with WAIT_KILLABLE_RECV if the tracer replies too fast

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johannes Nixdorf <johannes@nixdorf.dev>

[ Upstream commit cce436aafc2abad691fdd37de63ec8a4490b42ce ]

Normally the tracee starts in SECCOMP_NOTIFY_INIT, sends an
event to the tracer, and starts to wait interruptibly. With
SECCOMP_FILTER_FLAG_WAIT_KILLABLE_RECV, if the tracer receives the
message (SECCOMP_NOTIFY_SENT is reached) while the tracee was waiting
and is subsequently interrupted, the tracee begins to wait again
uninterruptibly (but killable).

This fails if SECCOMP_NOTIFY_REPLIED is reached before the tracee
is interrupted, as the check only considered SECCOMP_NOTIFY_SENT as a
condition to begin waiting again. In this case the tracee is interrupted
even though the tracer already acted on its behalf. This breaks the
assumption SECCOMP_FILTER_FLAG_WAIT_KILLABLE_RECV wanted to ensure,
namely that the tracer can be sure the syscall is not interrupted or
restarted on the tracee after it is received on the tracer. Fix this
by also considering SECCOMP_NOTIFY_REPLIED when evaluating whether to
switch to uninterruptible waiting.

With the condition changed the loop in seccomp_do_user_notification()
would exit immediately after deciding that noninterruptible waiting
is required if the operation already reached SECCOMP_NOTIFY_REPLIED,
skipping the code that processes pending addfd commands first. Prevent
this by executing the remaining loop body one last time in this case.

Fixes: c2aa2dfef243 ("seccomp: Add wait_killable semantic to seccomp user notifier")
Reported-by: Ali Polatel <alip@chesswob.org>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220291
Signed-off-by: Johannes Nixdorf <johannes@nixdorf.dev>
Link: https://lore.kernel.org/r/20250725-seccomp-races-v2-1-cf8b9d139596@nixdorf.dev
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/seccomp.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/kernel/seccomp.c b/kernel/seccomp.c
index 255999ba9190a..1d26a0e978f26 100644
--- a/kernel/seccomp.c
+++ b/kernel/seccomp.c
@@ -1099,7 +1099,7 @@ static void seccomp_handle_addfd(struct seccomp_kaddfd *addfd, struct seccomp_kn
 static bool should_sleep_killable(struct seccomp_filter *match,
 				  struct seccomp_knotif *n)
 {
-	return match->wait_killable_recv && n->state == SECCOMP_NOTIFY_SENT;
+	return match->wait_killable_recv && n->state >= SECCOMP_NOTIFY_SENT;
 }
 
 static int seccomp_do_user_notification(int this_syscall,
@@ -1146,13 +1146,11 @@ static int seccomp_do_user_notification(int this_syscall,
 
 		if (err != 0) {
 			/*
-			 * Check to see if the notifcation got picked up and
-			 * whether we should switch to wait killable.
+			 * Check to see whether we should switch to wait
+			 * killable. Only return the interrupted error if not.
 			 */
-			if (!wait_killable && should_sleep_killable(match, &n))
-				continue;
-
-			goto interrupted;
+			if (!(!wait_killable && should_sleep_killable(match, &n)))
+				goto interrupted;
 		}
 
 		addfd = list_first_entry_or_null(&n.addfd,
-- 
2.51.0

[PATCH 6.6 004/196] selftests: arm64: Check fread return value in exec_target

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bala-Vignesh-Reddy <reddybalavignesh9979@gmail.com>

[ Upstream commit a679e5683d3eef22ca12514ff8784b2b914ebedc ]

Fix -Wunused-result warning generated when compiled with gcc 13.3.0,
by checking fread's return value and handling errors, preventing
potential failures when reading from stdin.

Fixes compiler warning:
warning: ignoring return value of 'fread' declared with attribute
'warn_unused_result' [-Wunused-result]

Fixes: 806a15b2545e ("kselftests/arm64: add PAuth test for whether exec() changes keys")

Signed-off-by: Bala-Vignesh-Reddy <reddybalavignesh9979@gmail.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/arm64/pauth/exec_target.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/arm64/pauth/exec_target.c b/tools/testing/selftests/arm64/pauth/exec_target.c
index 4435600ca400d..e597861b26d6b 100644
--- a/tools/testing/selftests/arm64/pauth/exec_target.c
+++ b/tools/testing/selftests/arm64/pauth/exec_target.c
@@ -13,7 +13,12 @@ int main(void)
 	unsigned long hwcaps;
 	size_t val;
 
-	fread(&val, sizeof(size_t), 1, stdin);
+	size_t size = fread(&val, sizeof(size_t), 1, stdin);
+
+	if (size != 1) {
+		fprintf(stderr, "Could not read input from stdin\n");
+		return EXIT_FAILURE;
+	}
 
 	/* don't try to execute illegal (unimplemented) instructions) caller
 	 * should have checked this and keep worker simple
-- 
2.51.0

[PATCH 6.6 005/196] gfs2: Fix GLF_INVALIDATE_IN_PROGRESS flag clearing in do_xmote

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andreas Gruenbacher <agruenba@redhat.com>

[ Upstream commit 061df28b82af6b22fb5fa529a8f2ef00474ee004 ]

Commit 865cc3e9cc0b ("gfs2: fix a deadlock on withdraw-during-mount")
added a statement to do_xmote() to clear the GLF_INVALIDATE_IN_PROGRESS
flag a second time after it has already been cleared.  Fix that.

Fixes: 865cc3e9cc0b ("gfs2: fix a deadlock on withdraw-during-mount")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/gfs2/glock.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c
index 687670075d225..c4bc86c3535ba 100644
--- a/fs/gfs2/glock.c
+++ b/fs/gfs2/glock.c
@@ -811,8 +811,6 @@ __acquires(&gl->gl_lockref.lock)
 			clear_bit(GLF_DEMOTE_IN_PROGRESS, &gl->gl_flags);
 			gfs2_glock_queue_work(gl, GL_GLOCK_DFT_HOLD);
 			return;
-		} else {
-			clear_bit(GLF_INVALIDATE_IN_PROGRESS, &gl->gl_flags);
 		}
 	}
 
-- 
2.51.0

[PATCH 6.6 006/196] coresight: trbe: Prevent overflow in PERF_IDX2OFF()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Leo Yan <leo.yan@arm.com>

[ Upstream commit 105f56877f2d5f82d71e20b45eb7be7c24c3d908 ]

Cast nr_pages to unsigned long to avoid overflow when handling large
AUX buffer sizes (>= 2 GiB).

Fixes: 3fbf7f011f24 ("coresight: sink: Add TRBE driver")
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwtracing/coresight/coresight-trbe.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/hwtracing/coresight/coresight-trbe.c b/drivers/hwtracing/coresight/coresight-trbe.c
index e20c1c6acc731..7f91b1ffe66a5 100644
--- a/drivers/hwtracing/coresight/coresight-trbe.c
+++ b/drivers/hwtracing/coresight/coresight-trbe.c
@@ -21,7 +21,8 @@
 #include "coresight-self-hosted-trace.h"
 #include "coresight-trbe.h"
 
-#define PERF_IDX2OFF(idx, buf) ((idx) % ((buf)->nr_pages << PAGE_SHIFT))
+#define PERF_IDX2OFF(idx, buf) \
+	((idx) % ((unsigned long)(buf)->nr_pages << PAGE_SHIFT))
 
 /*
  * A padding packet that will help the user space tools
-- 
2.51.0

[PATCH 6.6 007/196] perf: arm_spe: Prevent overflow in PERF_IDX2OFF()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Leo Yan <leo.yan@arm.com>

[ Upstream commit a29fea30dd93da16652930162b177941abd8c75e ]

Cast nr_pages to unsigned long to avoid overflow when handling large
AUX buffer sizes (>= 2 GiB).

Fixes: d5d9696b0380 ("drivers/perf: Add support for ARMv8.2 Statistical Profiling Extension")
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/perf/arm_spe_pmu.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/perf/arm_spe_pmu.c b/drivers/perf/arm_spe_pmu.c
index 2bec2e3af0bd6..affa78376b6a8 100644
--- a/drivers/perf/arm_spe_pmu.c
+++ b/drivers/perf/arm_spe_pmu.c
@@ -96,7 +96,8 @@ struct arm_spe_pmu {
 #define to_spe_pmu(p) (container_of(p, struct arm_spe_pmu, pmu))
 
 /* Convert a free-running index from perf into an SPE buffer offset */
-#define PERF_IDX2OFF(idx, buf)	((idx) % ((buf)->nr_pages << PAGE_SHIFT))
+#define PERF_IDX2OFF(idx, buf) \
+	((idx) % ((unsigned long)(buf)->nr_pages << PAGE_SHIFT))
 
 /* Keep track of our dynamic hotplug state */
 static enum cpuhp_state arm_spe_pmu_online;
-- 
2.51.0

[PATCH 6.6 008/196] smb: server: fix IRD/ORD negotiation with the client

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stefan Metzmacher <metze@samba.org>

[ Upstream commit fad988a2158d743da7971884b93482a73735b25e ]

Already do real negotiation in smb_direct_handle_connect_request()
where we see the requested initiator_depth and responder_resources
from the client.

We should detect legacy iwarp clients using MPA v1
with the custom IRD/ORD negotiation.

We need to send the custom IRD/ORD in big endian,
but we need to try to let clients with broken requests
using little endian (older cifs.ko) to work.

Note the reason why this uses u8 for
initiator_depth and responder_resources is
that the rdma layer also uses it.

Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Cc: linux-rdma@vger.kernel.org
Fixes: 0626e6641f6b ("cifsd: add server handler for central processing and tranport layers")
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/smb/server/transport_rdma.c | 99 +++++++++++++++++++++++++++++-----
 1 file changed, 85 insertions(+), 14 deletions(-)

diff --git a/fs/smb/server/transport_rdma.c b/fs/smb/server/transport_rdma.c
index 504e2a1cf33b8..31c1ac256e1be 100644
--- a/fs/smb/server/transport_rdma.c
+++ b/fs/smb/server/transport_rdma.c
@@ -152,6 +152,10 @@ struct smb_direct_transport {
 	struct work_struct	disconnect_work;
 
 	bool			negotiation_requested;
+
+	bool			legacy_iwarp;
+	u8			initiator_depth;
+	u8			responder_resources;
 };
 
 #define KSMBD_TRANS(t) ((struct ksmbd_transport *)&((t)->transport))
@@ -346,6 +350,9 @@ static struct smb_direct_transport *alloc_transport(struct rdma_cm_id *cm_id)
 	t->cm_id = cm_id;
 	cm_id->context = t;
 
+	t->initiator_depth = SMB_DIRECT_CM_INITIATOR_DEPTH;
+	t->responder_resources = 1;
+
 	t->status = SMB_DIRECT_CS_NEW;
 	init_waitqueue_head(&t->wait_status);
 
@@ -1623,21 +1630,21 @@ static int smb_direct_send_negotiate_response(struct smb_direct_transport *t,
 static int smb_direct_accept_client(struct smb_direct_transport *t)
 {
 	struct rdma_conn_param conn_param;
-	struct ib_port_immutable port_immutable;
-	u32 ird_ord_hdr[2];
+	__be32 ird_ord_hdr[2];
 	int ret;
 
+	/*
+	 * smb_direct_handle_connect_request()
+	 * already negotiated t->initiator_depth
+	 * and t->responder_resources
+	 */
 	memset(&conn_param, 0, sizeof(conn_param));
-	conn_param.initiator_depth = min_t(u8, t->cm_id->device->attrs.max_qp_rd_atom,
-					   SMB_DIRECT_CM_INITIATOR_DEPTH);
-	conn_param.responder_resources = 0;
-
-	t->cm_id->device->ops.get_port_immutable(t->cm_id->device,
-						 t->cm_id->port_num,
-						 &port_immutable);
-	if (port_immutable.core_cap_flags & RDMA_CORE_PORT_IWARP) {
-		ird_ord_hdr[0] = conn_param.responder_resources;
-		ird_ord_hdr[1] = 1;
+	conn_param.initiator_depth = t->initiator_depth;
+	conn_param.responder_resources = t->responder_resources;
+
+	if (t->legacy_iwarp) {
+		ird_ord_hdr[0] = cpu_to_be32(conn_param.responder_resources);
+		ird_ord_hdr[1] = cpu_to_be32(conn_param.initiator_depth);
 		conn_param.private_data = ird_ord_hdr;
 		conn_param.private_data_len = sizeof(ird_ord_hdr);
 	} else {
@@ -2023,10 +2030,13 @@ static bool rdma_frwr_is_supported(struct ib_device_attr *attrs)
 	return true;
 }
 
-static int smb_direct_handle_connect_request(struct rdma_cm_id *new_cm_id)
+static int smb_direct_handle_connect_request(struct rdma_cm_id *new_cm_id,
+					     struct rdma_cm_event *event)
 {
 	struct smb_direct_transport *t;
 	struct task_struct *handler;
+	u8 peer_initiator_depth;
+	u8 peer_responder_resources;
 	int ret;
 
 	if (!rdma_frwr_is_supported(&new_cm_id->device->attrs)) {
@@ -2040,6 +2050,67 @@ static int smb_direct_handle_connect_request(struct rdma_cm_id *new_cm_id)
 	if (!t)
 		return -ENOMEM;
 
+	peer_initiator_depth = event->param.conn.initiator_depth;
+	peer_responder_resources = event->param.conn.responder_resources;
+	if (rdma_protocol_iwarp(new_cm_id->device, new_cm_id->port_num) &&
+	    event->param.conn.private_data_len == 8) {
+		/*
+		 * Legacy clients with only iWarp MPA v1 support
+		 * need a private blob in order to negotiate
+		 * the IRD/ORD values.
+		 */
+		const __be32 *ird_ord_hdr = event->param.conn.private_data;
+		u32 ird32 = be32_to_cpu(ird_ord_hdr[0]);
+		u32 ord32 = be32_to_cpu(ird_ord_hdr[1]);
+
+		/*
+		 * cifs.ko sends the legacy IRD/ORD negotiation
+		 * event if iWarp MPA v2 was used.
+		 *
+		 * Here we check that the values match and only
+		 * mark the client as legacy if they don't match.
+		 */
+		if ((u32)event->param.conn.initiator_depth != ird32 ||
+		    (u32)event->param.conn.responder_resources != ord32) {
+			/*
+			 * There are broken clients (old cifs.ko)
+			 * using little endian and also
+			 * struct rdma_conn_param only uses u8
+			 * for initiator_depth and responder_resources,
+			 * so we truncate the value to U8_MAX.
+			 *
+			 * smb_direct_accept_client() will then
+			 * do the real negotiation in order to
+			 * select the minimum between client and
+			 * server.
+			 */
+			ird32 = min_t(u32, ird32, U8_MAX);
+			ord32 = min_t(u32, ord32, U8_MAX);
+
+			t->legacy_iwarp = true;
+			peer_initiator_depth = (u8)ird32;
+			peer_responder_resources = (u8)ord32;
+		}
+	}
+
+	/*
+	 * First set what the we as server are able to support
+	 */
+	t->initiator_depth = min_t(u8, t->initiator_depth,
+				   new_cm_id->device->attrs.max_qp_rd_atom);
+
+	/*
+	 * negotiate the value by using the minimum
+	 * between client and server if the client provided
+	 * non 0 values.
+	 */
+	if (peer_initiator_depth != 0)
+		t->initiator_depth = min_t(u8, t->initiator_depth,
+					   peer_initiator_depth);
+	if (peer_responder_resources != 0)
+		t->responder_resources = min_t(u8, t->responder_resources,
+					       peer_responder_resources);
+
 	ret = smb_direct_connect(t);
 	if (ret)
 		goto out_err;
@@ -2064,7 +2135,7 @@ static int smb_direct_listen_handler(struct rdma_cm_id *cm_id,
 {
 	switch (event->event) {
 	case RDMA_CM_EVENT_CONNECT_REQUEST: {
-		int ret = smb_direct_handle_connect_request(cm_id);
+		int ret = smb_direct_handle_connect_request(cm_id, event);
 
 		if (ret) {
 			pr_err("Can't create transport: %d\n", ret);
-- 
2.51.0

[PATCH 6.6 009/196] EDAC/i10nm: Skip DIMM enumeration on a disabled memory controller

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Qiuxu Zhuo <qiuxu.zhuo@intel.com>

[ Upstream commit 2e6fe1bbefd9c059c3787d1c620fe67343a94dff ]

When loading the i10nm_edac driver on some Intel Granite Rapids servers,
a call trace may appear as follows:

  UBSAN: shift-out-of-bounds in drivers/edac/skx_common.c:453:16
  shift exponent -66 is negative
  ...
  __ubsan_handle_shift_out_of_bounds+0x1e3/0x390
  skx_get_dimm_info.cold+0x47/0xd40 [skx_edac_common]
  i10nm_get_dimm_config+0x23e/0x390 [i10nm_edac]
  skx_register_mci+0x159/0x220 [skx_edac_common]
  i10nm_init+0xcb0/0x1ff0 [i10nm_edac]
  ...

This occurs because some BIOS may disable a memory controller if there
aren't any memory DIMMs populated on this memory controller. The DIMMMTR
register of this disabled memory controller contains the invalid value
~0, resulting in the call trace above.

Fix this call trace by skipping DIMM enumeration on a disabled memory
controller.

Fixes: ba987eaaabf9 ("EDAC/i10nm: Add Intel Granite Rapids server support")
Reported-by: Jose Jesus Ambriz Meza <jose.jesus.ambriz.meza@intel.com>
Reported-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Closes: https://lore.kernel.org/all/20250730063155.2612379-1-acelan.kao@canonical.com/
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Link: https://lore.kernel.org/r/20250806065707.3533345-1-qiuxu.zhuo@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/edac/i10nm_base.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/edac/i10nm_base.c b/drivers/edac/i10nm_base.c
index 068597e8fce95..3c70d86074975 100644
--- a/drivers/edac/i10nm_base.c
+++ b/drivers/edac/i10nm_base.c
@@ -970,6 +970,15 @@ static bool i10nm_check_ecc(struct skx_imc *imc, int chan)
 	return !!GET_BITFIELD(mcmtr, 2, 2);
 }
 
+static bool i10nm_channel_disabled(struct skx_imc *imc, int chan)
+{
+	u32 mcmtr = I10NM_GET_MCMTR(imc, chan);
+
+	edac_dbg(1, "mc%d ch%d mcmtr reg %x\n", imc->mc, chan, mcmtr);
+
+	return (mcmtr == ~0 || GET_BITFIELD(mcmtr, 18, 18));
+}
+
 static int i10nm_get_dimm_config(struct mem_ctl_info *mci,
 				 struct res_config *cfg)
 {
@@ -983,6 +992,11 @@ static int i10nm_get_dimm_config(struct mem_ctl_info *mci,
 		if (!imc->mbase)
 			continue;
 
+		if (i10nm_channel_disabled(imc, i)) {
+			edac_dbg(1, "mc%d ch%d is disabled.\n", imc->mc, i);
+			continue;
+		}
+
 		ndimms = 0;
 		amap = I10NM_GET_AMAP(imc, i);
 
-- 
2.51.0

[PATCH 6.6 010/196] x86/vdso: Fix output operand size of RDPID

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Uros Bizjak <ubizjak@gmail.com>

[ Upstream commit ac9c408ed19d535289ca59200dd6a44a6a2d6036 ]

RDPID instruction outputs to a word-sized register (64-bit on x86_64 and
32-bit on x86_32). Use an unsigned long variable to store the correct size.

LSL outputs to 32-bit register, use %k operand prefix to always print the
32-bit name of the register.

Use RDPID insn mnemonic while at it as the minimum binutils version of
2.30 supports it.

  [ bp: Merge two patches touching the same function into a single one. ]

Fixes: ffebbaedc861 ("x86/vdso: Introduce helper functions for CPU and node number")
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250616095315.230620-1-ubizjak@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/include/asm/segment.h | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/x86/include/asm/segment.h b/arch/x86/include/asm/segment.h
index 9d6411c659205..00cefbb59fa98 100644
--- a/arch/x86/include/asm/segment.h
+++ b/arch/x86/include/asm/segment.h
@@ -244,7 +244,7 @@ static inline unsigned long vdso_encode_cpunode(int cpu, unsigned long node)
 
 static inline void vdso_read_cpunode(unsigned *cpu, unsigned *node)
 {
-	unsigned int p;
+	unsigned long p;
 
 	/*
 	 * Load CPU and node number from the GDT.  LSL is faster than RDTSCP
@@ -254,10 +254,10 @@ static inline void vdso_read_cpunode(unsigned *cpu, unsigned *node)
 	 *
 	 * If RDPID is available, use it.
 	 */
-	alternative_io ("lsl %[seg],%[p]",
-			".byte 0xf3,0x0f,0xc7,0xf8", /* RDPID %eax/rax */
+	alternative_io ("lsl %[seg],%k[p]",
+			"rdpid %[p]",
 			X86_FEATURE_RDPID,
-			[p] "=a" (p), [seg] "r" (__CPUNODE_SEG));
+			[p] "=r" (p), [seg] "r" (__CPUNODE_SEG));
 
 	if (cpu)
 		*cpu = (p & VDSO_CPUNODE_MASK);
-- 
2.51.0

[PATCH 6.6 011/196] arm64: dts: renesas: rzg2lc-smarc: Disable CAN-FD channel0

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Biju Das <biju.das.jz@bp.renesas.com>

[ Upstream commit ae014fbc99c7f986ee785233e7a5336834e39af4 ]

On RZ/G2LC SMARC EVK, CAN-FD channel0 is not populated, and currently we
are deleting a wrong and nonexistent node.  Fixing the wrong node would
invoke a dtb warning message, as channel0 is a required property.
Disable CAN-FD channel0 instead of deleting the node.

Fixes: 46da632734a5 ("arm64: dts: renesas: rzg2lc-smarc: Enable CANFD channel 1")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250801121959.267424-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi
index 83fce96a25752..0234dbe95413c 100644
--- a/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi
@@ -38,7 +38,10 @@ hdmi_con_out: endpoint {
 #if (SW_SCIF_CAN || SW_RSPI_CAN)
 &canfd {
 	pinctrl-0 = <&can1_pins>;
-	/delete-node/ channel@0;
+
+	channel0 {
+		status = "disabled";
+	};
 };
 #else
 &canfd {
-- 
2.51.0

[PATCH 6.6 012/196] regmap: Remove superfluous check for !config in __regmap_init()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 5c36b86d2bf68fbcad16169983ef7ee8c537db59 ]

The first thing __regmap_init() do is check if config is non-NULL,
so there is no need to check for this again later.

Fixes: d77e745613680c54 ("regmap: Add bulk read/write callbacks into regmap_config")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/a154d9db0f290dda96b48bd817eb743773e846e1.1755090330.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/base/regmap/regmap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c
index 1209e01f8c7f9..9603c28a3ed82 100644
--- a/drivers/base/regmap/regmap.c
+++ b/drivers/base/regmap/regmap.c
@@ -827,7 +827,7 @@ struct regmap *__regmap_init(struct device *dev,
 		map->read_flag_mask = bus->read_flag_mask;
 	}
 
-	if (config && config->read && config->write) {
+	if (config->read && config->write) {
 		map->reg_read  = _regmap_bus_read;
 		if (config->reg_update_bits)
 			map->reg_update_bits = config->reg_update_bits;
-- 
2.51.0

[PATCH 6.6 013/196] bpf/selftests: Fix test_tcpnotify_user

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Matt Bobrowski <mattbobrowski@google.com>

[ Upstream commit c80d79720647ed77ebc0198abd5a0807efdaff0b ]

Based on a bisect, it appears that commit 7ee988770326 ("timers:
Implement the hierarchical pull model") has somehow inadvertently
broken BPF selftest test_tcpnotify_user. The error that is being
generated by this test is as follows:

	FAILED: Wrong stats Expected 10 calls, got 8

It looks like the change allows timer functions to be run on CPUs
different from the one they are armed on. The test had pinned itself
to CPU 0, and in the past the retransmit attempts also occurred on CPU
0. The test had set the max_entries attribute for
BPF_MAP_TYPE_PERF_EVENT_ARRAY to 2 and was calling
bpf_perf_event_output() with BPF_F_CURRENT_CPU, so the entry was
likely to be in range. With the change to allow timers to run on other
CPUs, the current CPU tasked with performing the retransmit might be
bumped and in turn fall out of range, as the event will be filtered
out via __bpf_perf_event_output() using:

    if (unlikely(index >= array->map.max_entries))
            return -E2BIG;

A possible change would be to explicitly set the max_entries attribute
for perf_event_map in test_tcpnotify_kern.c to a value that's at least
as large as the number of CPUs. As it turns out however, if the field
is left unset, then the libbpf will determine the number of CPUs available
on the underlying system and update the max_entries attribute accordingly
in map_set_def_max_entries().

A further problem with the test is that it has a thread that continues
running up until the program exits. The main thread cleans up some
LIBBPF data structures, while the other thread continues to use them,
which inevitably will trigger a SIGSEGV. This can be dealt with by
telling the thread to run for as long as necessary and doing a
pthread_join on it before exiting the program.

Finally, I don't think binding the process to CPU 0 is meaningful for
this test any more, so get rid of that.

Fixes: 435f90a338ae ("selftests/bpf: add a test case for sock_ops perf-event notification")
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/aJ8kHhwgATmA3rLf@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../selftests/bpf/progs/test_tcpnotify_kern.c |  1 -
 .../selftests/bpf/test_tcpnotify_user.c       | 20 +++++++++----------
 2 files changed, 10 insertions(+), 11 deletions(-)

diff --git a/tools/testing/selftests/bpf/progs/test_tcpnotify_kern.c b/tools/testing/selftests/bpf/progs/test_tcpnotify_kern.c
index 540181c115a85..ef00d38b0a8d2 100644
--- a/tools/testing/selftests/bpf/progs/test_tcpnotify_kern.c
+++ b/tools/testing/selftests/bpf/progs/test_tcpnotify_kern.c
@@ -23,7 +23,6 @@ struct {
 
 struct {
 	__uint(type, BPF_MAP_TYPE_PERF_EVENT_ARRAY);
-	__uint(max_entries, 2);
 	__type(key, int);
 	__type(value, __u32);
 } perf_event_map SEC(".maps");
diff --git a/tools/testing/selftests/bpf/test_tcpnotify_user.c b/tools/testing/selftests/bpf/test_tcpnotify_user.c
index 595194453ff8f..35b4893ccdf8a 100644
--- a/tools/testing/selftests/bpf/test_tcpnotify_user.c
+++ b/tools/testing/selftests/bpf/test_tcpnotify_user.c
@@ -15,20 +15,18 @@
 #include <bpf/libbpf.h>
 #include <sys/ioctl.h>
 #include <linux/rtnetlink.h>
-#include <signal.h>
 #include <linux/perf_event.h>
-#include <linux/err.h>
 
-#include "bpf_util.h"
 #include "cgroup_helpers.h"
 
 #include "test_tcpnotify.h"
-#include "trace_helpers.h"
 #include "testing_helpers.h"
 
 #define SOCKET_BUFFER_SIZE (getpagesize() < 8192L ? getpagesize() : 8192L)
 
 pthread_t tid;
+static bool exit_thread;
+
 int rx_callbacks;
 
 static void dummyfn(void *ctx, int cpu, void *data, __u32 size)
@@ -45,7 +43,7 @@ void tcp_notifier_poller(struct perf_buffer *pb)
 {
 	int err;
 
-	while (1) {
+	while (!exit_thread) {
 		err = perf_buffer__poll(pb, 100);
 		if (err < 0 && err != -EINTR) {
 			printf("failed perf_buffer__poll: %d\n", err);
@@ -78,15 +76,10 @@ int main(int argc, char **argv)
 	int error = EXIT_FAILURE;
 	struct bpf_object *obj;
 	char test_script[80];
-	cpu_set_t cpuset;
 	__u32 key = 0;
 
 	libbpf_set_strict_mode(LIBBPF_STRICT_ALL);
 
-	CPU_ZERO(&cpuset);
-	CPU_SET(0, &cpuset);
-	pthread_setaffinity_np(pthread_self(), sizeof(cpu_set_t), &cpuset);
-
 	cg_fd = cgroup_setup_and_join(cg_path);
 	if (cg_fd < 0)
 		goto err;
@@ -151,6 +144,13 @@ int main(int argc, char **argv)
 
 	sleep(10);
 
+	exit_thread = true;
+	int ret = pthread_join(tid, NULL);
+	if (ret) {
+		printf("FAILED: pthread_join\n");
+		goto err;
+	}
+
 	if (verify_result(&g)) {
 		printf("FAILED: Wrong stats Expected %d calls, got %d\n",
 			g.ncalls, rx_callbacks);
-- 
2.51.0

[PATCH 6.6 014/196] bpf: Remove migrate_disable in kprobe_multi_link_prog_run

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tao Chen <chen.dylane@linux.dev>

[ Upstream commit abdaf49be5424db74e19d167c10d7dad79a0efc2 ]

Graph tracer framework ensures we won't migrate, kprobe_multi_link_prog_run
called all the way from graph tracer, which disables preemption in
function_graph_enter_regs, as Jiri and Yonghong suggested, there is no
need to use migrate_disable. As a result, some overhead may will be reduced.
And add cant_sleep check for __this_cpu_inc_return.

Fixes: 0dcac2725406 ("bpf: Add multi kprobe link")
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250814121430.2347454-1-chen.dylane@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/trace/bpf_trace.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/kernel/trace/bpf_trace.c b/kernel/trace/bpf_trace.c
index 8903db0b59602..a896b80252ae1 100644
--- a/kernel/trace/bpf_trace.c
+++ b/kernel/trace/bpf_trace.c
@@ -2726,18 +2726,23 @@ kprobe_multi_link_prog_run(struct bpf_kprobe_multi_link *link,
 	struct bpf_run_ctx *old_run_ctx;
 	int err;
 
+	/*
+	 * graph tracer framework ensures we won't migrate, so there is no need
+	 * to use migrate_disable for bpf_prog_run again. The check here just for
+	 * __this_cpu_inc_return.
+	 */
+	cant_sleep();
+
 	if (unlikely(__this_cpu_inc_return(bpf_prog_active) != 1)) {
 		err = 0;
 		goto out;
 	}
 
-	migrate_disable();
 	rcu_read_lock();
 	old_run_ctx = bpf_set_run_ctx(&run_ctx.run_ctx);
 	err = bpf_prog_run(link->link.prog, regs);
 	bpf_reset_run_ctx(old_run_ctx);
 	rcu_read_unlock();
-	migrate_enable();
 
  out:
 	__this_cpu_dec(bpf_prog_active);
-- 
2.51.0

[PATCH 6.6 015/196] libbpf: Fix reuse of DEVMAP

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yureka Lilian <yuka@yuka.dev>

[ Upstream commit 6c6b4146deb12d20f42490d5013f2043df942161 ]

Previously, re-using pinned DEVMAP maps would always fail, because
get_map_info on a DEVMAP always returns flags with BPF_F_RDONLY_PROG set,
but BPF_F_RDONLY_PROG being set on a map during creation is invalid.

Thus, ignore the BPF_F_RDONLY_PROG flag in the flags returned from
get_map_info when checking for compatibility with an existing DEVMAP.

The same problem is handled in a third-party ebpf library:
- https://github.com/cilium/ebpf/issues/925
- https://github.com/cilium/ebpf/pull/930

Fixes: 0cdbb4b09a06 ("devmap: Allow map lookups from eBPF")
Signed-off-by: Yureka Lilian <yuka@yuka.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250814180113.1245565-3-yuka@yuka.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/bpf/libbpf.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c
index aefbfa2df6207..95f2ffefff3ff 100644
--- a/tools/lib/bpf/libbpf.c
+++ b/tools/lib/bpf/libbpf.c
@@ -5013,6 +5013,16 @@ static bool map_is_reuse_compat(const struct bpf_map *map, int map_fd)
 		return false;
 	}
 
+	/*
+	 * bpf_get_map_info_by_fd() for DEVMAP will always return flags with
+	 * BPF_F_RDONLY_PROG set, but it generally is not set at map creation time.
+	 * Thus, ignore the BPF_F_RDONLY_PROG flag in the flags returned from
+	 * bpf_get_map_info_by_fd() when checking for compatibility with an
+	 * existing DEVMAP.
+	 */
+	if (map->def.type == BPF_MAP_TYPE_DEVMAP || map->def.type == BPF_MAP_TYPE_DEVMAP_HASH)
+		map_info.map_flags &= ~BPF_F_RDONLY_PROG;
+
 	return (map_info.type == map->def.type &&
 		map_info.key_size == map->def.key_size &&
 		map_info.value_size == map->def.value_size &&
-- 
2.51.0

[PATCH 6.6 016/196] ARM: dts: renesas: porter: Fix CAN pin group

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 287066b295051729fb08c3cff12ae17c6fe66133 ]

According to the schematics, the CAN transceiver is connected to pins
GP7_3 and GP7_4, which correspond to CAN0 data group B.

Fixes: 0768fbad7fba1d27 ("ARM: shmobile: porter: add CAN0 DT support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/70ad9bc44d6cea92197c42eedcad6b3d0641d26a.1751032025.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/renesas/r8a7791-porter.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/renesas/r8a7791-porter.dts b/arch/arm/boot/dts/renesas/r8a7791-porter.dts
index fcc9a2313e1df..0cd08f7b8d8e0 100644
--- a/arch/arm/boot/dts/renesas/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/renesas/r8a7791-porter.dts
@@ -266,7 +266,7 @@ vin0_pins: vin0 {
 	};
 
 	can0_pins: can0 {
-		groups = "can0_data";
+		groups = "can0_data_b";
 		function = "can0";
 	};
 
-- 
2.51.0

[PATCH 6.6 017/196] leds: flash: leds-qcom-flash: Update torch current clamp setting

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Fenglin Wu <fenglin.wu@oss.qualcomm.com>

[ Upstream commit 5974e8f6c3e47ab097c3dd8ece7324d1f88fe739 ]

There is a register to clamp the flash current per LED channel when
safety timer is disabled. It needs to be updated according to the
maximum torch LED current setting to ensure the torch current won't
be clamped unexpectedly.

Fixes: 96a2e242a5dc ("leds: flash: Add driver to support flash LED module in QCOM PMICs")
Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250729-fix-torch-clamp-issue-v2-1-9b83816437a3@oss.qualcomm.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/leds/flash/leds-qcom-flash.c | 62 ++++++++++++++++------------
 1 file changed, 36 insertions(+), 26 deletions(-)

diff --git a/drivers/leds/flash/leds-qcom-flash.c b/drivers/leds/flash/leds-qcom-flash.c
index a619dbe015243..07ca3e32d4bec 100644
--- a/drivers/leds/flash/leds-qcom-flash.c
+++ b/drivers/leds/flash/leds-qcom-flash.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (c) 2022, 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2022, 2024-2025 Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
 #include <linux/bitfield.h>
@@ -114,36 +114,39 @@ enum {
 	REG_THERM_THRSH1,
 	REG_THERM_THRSH2,
 	REG_THERM_THRSH3,
+	REG_TORCH_CLAMP,
 	REG_MAX_COUNT,
 };
 
 static const struct reg_field mvflash_3ch_regs[REG_MAX_COUNT] = {
-	REG_FIELD(0x08, 0, 7),			/* status1	*/
-	REG_FIELD(0x09, 0, 7),                  /* status2	*/
-	REG_FIELD(0x0a, 0, 7),                  /* status3	*/
-	REG_FIELD_ID(0x40, 0, 7, 3, 1),         /* chan_timer	*/
-	REG_FIELD_ID(0x43, 0, 6, 3, 1),         /* itarget	*/
-	REG_FIELD(0x46, 7, 7),                  /* module_en	*/
-	REG_FIELD(0x47, 0, 5),                  /* iresolution	*/
-	REG_FIELD_ID(0x49, 0, 2, 3, 1),         /* chan_strobe	*/
-	REG_FIELD(0x4c, 0, 2),                  /* chan_en	*/
-	REG_FIELD(0x56, 0, 2),			/* therm_thrsh1 */
-	REG_FIELD(0x57, 0, 2),			/* therm_thrsh2 */
-	REG_FIELD(0x58, 0, 2),			/* therm_thrsh3 */
+	[REG_STATUS1]		= REG_FIELD(0x08, 0, 7),
+	[REG_STATUS2]		= REG_FIELD(0x09, 0, 7),
+	[REG_STATUS3]		= REG_FIELD(0x0a, 0, 7),
+	[REG_CHAN_TIMER]	= REG_FIELD_ID(0x40, 0, 7, 3, 1),
+	[REG_ITARGET]		= REG_FIELD_ID(0x43, 0, 6, 3, 1),
+	[REG_MODULE_EN]		= REG_FIELD(0x46, 7, 7),
+	[REG_IRESOLUTION]	= REG_FIELD(0x47, 0, 5),
+	[REG_CHAN_STROBE]	= REG_FIELD_ID(0x49, 0, 2, 3, 1),
+	[REG_CHAN_EN]		= REG_FIELD(0x4c, 0, 2),
+	[REG_THERM_THRSH1]	= REG_FIELD(0x56, 0, 2),
+	[REG_THERM_THRSH2]	= REG_FIELD(0x57, 0, 2),
+	[REG_THERM_THRSH3]	= REG_FIELD(0x58, 0, 2),
+	[REG_TORCH_CLAMP]	= REG_FIELD(0xec, 0, 6),
 };
 
 static const struct reg_field mvflash_4ch_regs[REG_MAX_COUNT] = {
-	REG_FIELD(0x06, 0, 7),			/* status1	*/
-	REG_FIELD(0x07, 0, 6),			/* status2	*/
-	REG_FIELD(0x09, 0, 7),			/* status3	*/
-	REG_FIELD_ID(0x3e, 0, 7, 4, 1),		/* chan_timer	*/
-	REG_FIELD_ID(0x42, 0, 6, 4, 1),		/* itarget	*/
-	REG_FIELD(0x46, 7, 7),			/* module_en	*/
-	REG_FIELD(0x49, 0, 3),			/* iresolution	*/
-	REG_FIELD_ID(0x4a, 0, 6, 4, 1),		/* chan_strobe	*/
-	REG_FIELD(0x4e, 0, 3),			/* chan_en	*/
-	REG_FIELD(0x7a, 0, 2),			/* therm_thrsh1 */
-	REG_FIELD(0x78, 0, 2),			/* therm_thrsh2 */
+	[REG_STATUS1]		= REG_FIELD(0x06, 0, 7),
+	[REG_STATUS2]		= REG_FIELD(0x07, 0, 6),
+	[REG_STATUS3]		= REG_FIELD(0x09, 0, 7),
+	[REG_CHAN_TIMER]	= REG_FIELD_ID(0x3e, 0, 7, 4, 1),
+	[REG_ITARGET]		= REG_FIELD_ID(0x42, 0, 6, 4, 1),
+	[REG_MODULE_EN]		= REG_FIELD(0x46, 7, 7),
+	[REG_IRESOLUTION]	= REG_FIELD(0x49, 0, 3),
+	[REG_CHAN_STROBE]	= REG_FIELD_ID(0x4a, 0, 6, 4, 1),
+	[REG_CHAN_EN]		= REG_FIELD(0x4e, 0, 3),
+	[REG_THERM_THRSH1]	= REG_FIELD(0x7a, 0, 2),
+	[REG_THERM_THRSH2]	= REG_FIELD(0x78, 0, 2),
+	[REG_TORCH_CLAMP]	= REG_FIELD(0xed, 0, 6),
 };
 
 struct qcom_flash_data {
@@ -156,6 +159,7 @@ struct qcom_flash_data {
 	u8			max_channels;
 	u8			chan_en_bits;
 	u8			revision;
+	u8			torch_clamp;
 };
 
 struct qcom_flash_led {
@@ -702,6 +706,7 @@ static int qcom_flash_register_led_device(struct device *dev,
 	u32 current_ua, timeout_us;
 	u32 channels[4];
 	int i, rc, count;
+	u8 torch_clamp;
 
 	count = fwnode_property_count_u32(node, "led-sources");
 	if (count <= 0) {
@@ -751,6 +756,12 @@ static int qcom_flash_register_led_device(struct device *dev,
 	current_ua = min_t(u32, current_ua, TORCH_CURRENT_MAX_UA * led->chan_count);
 	led->max_torch_current_ma = current_ua / UA_PER_MA;
 
+	torch_clamp = (current_ua / led->chan_count) / TORCH_IRES_UA;
+	if (torch_clamp != 0)
+		torch_clamp--;
+
+	flash_data->torch_clamp = max_t(u8, flash_data->torch_clamp, torch_clamp);
+
 	if (fwnode_property_present(node, "flash-max-microamp")) {
 		flash->led_cdev.flags |= LED_DEV_CAP_FLASH;
 
@@ -918,8 +929,7 @@ static int qcom_flash_led_probe(struct platform_device *pdev)
 		flash_data->leds_count++;
 	}
 
-	return 0;
-
+	return regmap_field_write(flash_data->r_fields[REG_TORCH_CLAMP], flash_data->torch_clamp);
 release:
 	fwnode_handle_put(child);
 	while (flash_data->v4l2_flash[flash_data->leds_count] && flash_data->leds_count)
-- 
2.51.0

[PATCH 6.6 018/196] s390/bpf: Write back tail call counter for BPF_PSEUDO_CALL

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ilya Leoshkevich <iii@linux.ibm.com>

[ Upstream commit c861a6b147137d10b5ff88a2c492ba376cd1b8b0 ]

The tailcall_bpf2bpf_hierarchy_1 test hangs on s390. Its call graph is
as follows:

  entry()
    subprog_tail()
      bpf_tail_call_static(0) -> entry + tail_call_start
    subprog_tail()
      bpf_tail_call_static(0) -> entry + tail_call_start

entry() copies its tail call counter to the subprog_tail()'s frame,
which then increments it. However, the incremented result is discarded,
leading to an astronomically large number of tail calls.

Fix by writing the incremented counter back to the entry()'s frame.

Fixes: dd691e847d28 ("s390/bpf: Implement bpf_jit_supports_subprog_tailcalls()")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20250813121016.163375-3-iii@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/net/bpf_jit_comp.c | 23 ++++++++++++++++-------
 1 file changed, 16 insertions(+), 7 deletions(-)

diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c
index 2d8facfd4e425..31a4bbd2e7dc4 100644
--- a/arch/s390/net/bpf_jit_comp.c
+++ b/arch/s390/net/bpf_jit_comp.c
@@ -1425,13 +1425,6 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp,
 		jit->seen |= SEEN_FUNC;
 		/*
 		 * Copy the tail call counter to where the callee expects it.
-		 *
-		 * Note 1: The callee can increment the tail call counter, but
-		 * we do not load it back, since the x86 JIT does not do this
-		 * either.
-		 *
-		 * Note 2: We assume that the verifier does not let us call the
-		 * main program, which clears the tail call counter on entry.
 		 */
 		/* mvc STK_OFF_TCCNT(4,%r15),N(%r15) */
 		_EMIT6(0xd203f000 | STK_OFF_TCCNT,
@@ -1457,6 +1450,22 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp,
 		call_r1(jit);
 		/* lgr %b0,%r2: load return value into %b0 */
 		EMIT4(0xb9040000, BPF_REG_0, REG_2);
+
+		/*
+		 * Copy the potentially updated tail call counter back.
+		 */
+
+		if (insn->src_reg == BPF_PSEUDO_CALL)
+			/*
+			 * mvc frame_off+tail_call_cnt(%r15),
+			 *     tail_call_cnt(4,%r15)
+			 */
+			_EMIT6(0xd203f000 | (jit->frame_off +
+					     offsetof(struct prog_frame,
+						      tail_call_cnt)),
+			       0xf000 | offsetof(struct prog_frame,
+						 tail_call_cnt));
+
 		break;
 	}
 	case BPF_JMP | BPF_TAIL_CALL: {
-- 
2.51.0

[PATCH 6.6 019/196] s390/bpf: Write back tail call counter for BPF_TRAMP_F_CALL_ORIG

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ilya Leoshkevich <iii@linux.ibm.com>

[ Upstream commit bc3905a71f02511607d3ccf732360580209cac4c ]

The tailcall_bpf2bpf_hierarchy_fentry test hangs on s390. Its call
graph is as follows:

  entry()
    subprog_tail()
      trampoline()
        fentry()
        the rest of subprog_tail()  # via BPF_TRAMP_F_CALL_ORIG
        return to entry()

The problem is that the rest of subprog_tail() increments the tail call
counter, but the trampoline discards the incremented value. This
results in an astronomically large number of tail calls.

Fix by making the trampoline write the incremented tail call counter
back.

Fixes: 528eb2cb87bc ("s390/bpf: Implement arch_prepare_bpf_trampoline()")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20250813121016.163375-4-iii@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/net/bpf_jit_comp.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c
index 31a4bbd2e7dc4..fe0354ad3bb96 100644
--- a/arch/s390/net/bpf_jit_comp.c
+++ b/arch/s390/net/bpf_jit_comp.c
@@ -2442,6 +2442,9 @@ static int __arch_prepare_bpf_trampoline(struct bpf_tramp_image *im,
 		/* stg %r2,retval_off(%r15) */
 		EMIT6_DISP_LH(0xe3000000, 0x0024, REG_2, REG_0, REG_15,
 			      tjit->retval_off);
+		/* mvc tccnt_off(%r15),tail_call_cnt(4,%r15) */
+		_EMIT6(0xd203f000 | tjit->tccnt_off,
+		       0xf000 | offsetof(struct prog_frame, tail_call_cnt));
 
 		im->ip_after_call = jit->prg_buf + jit->prg;
 
-- 
2.51.0

[PATCH 6.6 020/196] cpufreq: scmi: Account for malformed DT in scmi_dev_used_by_cpus()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Florian Fainelli <florian.fainelli@broadcom.com>

[ Upstream commit cd5d4621ba846dad9b2e6b0c2d1518d083fcfa13 ]

Broadcom STB platforms were early adopters (2017) of the SCMI framework and as
a result, not all deployed systems have a Device Tree entry where SCMI
protocol 0x13 (PERFORMANCE) is declared as a clock provider, nor are the
CPU Device Tree node(s) referencing protocol 0x13 as their clock
provider. This was clarified in commit e11c480b6df1 ("dt-bindings:
firmware: arm,scmi: Extend bindings for protocol@13") in 2023.

For those platforms, we allow the checks done by scmi_dev_used_by_cpus()
to continue, and in the event of not having done an early return, we key
off the documented compatible string and give them a pass to continue to
use scmi-cpufreq.

Fixes: 6c9bb8692272 ("cpufreq: scmi: Skip SCMI devices that aren't used by the CPUs")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/scmi-cpufreq.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/cpufreq/scmi-cpufreq.c b/drivers/cpufreq/scmi-cpufreq.c
index 6ff77003a96ea..68325ebd56fe3 100644
--- a/drivers/cpufreq/scmi-cpufreq.c
+++ b/drivers/cpufreq/scmi-cpufreq.c
@@ -15,6 +15,7 @@
 #include <linux/energy_model.h>
 #include <linux/export.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/pm_opp.h>
 #include <linux/slab.h>
 #include <linux/scmi_protocol.h>
@@ -330,6 +331,15 @@ static bool scmi_dev_used_by_cpus(struct device *scmi_dev)
 			return true;
 	}
 
+	/*
+	 * Older Broadcom STB chips had a "clocks" property for CPU node(s)
+	 * that did not match the SCMI performance protocol node, if we got
+	 * there, it means we had such an older Device Tree, therefore return
+	 * true to preserve backwards compatibility.
+	 */
+	if (of_machine_is_compatible("brcm,brcmstb"))
+		return true;
+
 	return false;
 }
 
-- 
2.51.0

[PATCH 6.6 021/196] ACPI: processor: idle: Fix memory leak when register cpuidle device failed

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Huisong Li <lihuisong@huawei.com>

[ Upstream commit 11b3de1c03fa9f3b5d17e6d48050bc98b3704420 ]

The cpuidle device's memory is leaked when cpuidle device registration
fails in acpi_processor_power_init().  Free it as appropriate.

Fixes: 3d339dcbb56d ("cpuidle / ACPI : move cpuidle_device field out of the acpi_processor_power structure")
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Link: https://patch.msgid.link/20250728070612.1260859-2-lihuisong@huawei.com
[ rjw: Changed the order of the new statements, added empty line after if () ]
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/processor_idle.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 0888e4d618d53..b524cf27213d4 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -1410,6 +1410,9 @@ int acpi_processor_power_init(struct acpi_processor *pr)
 		if (retval) {
 			if (acpi_processor_registered == 0)
 				cpuidle_unregister_driver(&acpi_idle_driver);
+
+			per_cpu(acpi_cpuidle_device, pr->id) = NULL;
+			kfree(dev);
 			return retval;
 		}
 		acpi_processor_registered++;
-- 
2.51.0

[PATCH 6.6 022/196] soc: qcom: rpmh-rsc: Unconditionally clear _TRIGGER bit for TCS

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sneh Mankad <sneh.mankad@oss.qualcomm.com>

[ Upstream commit f87412d18edb5b8393eb8cb1c2d4a54f90185a21 ]

Unconditionally clear the TCS_AMC_MODE_TRIGGER bit when a
transaction completes. Previously this bit was only cleared when
a wake TCS was borrowed as an AMC TCS but not for dedicated
AMC TCS. Leaving this bit set for AMC TCS and entering deeper low
power modes can generate a false completion IRQ.

Prevent this scenario by always clearing the TCS_AMC_MODE_TRIGGER
bit upon receiving a completion IRQ.

Fixes: 15b3bf61b8d4 ("soc: qcom: rpmh-rsc: Clear active mode configuration for wake TCS")
Signed-off-by: Sneh Mankad <sneh.mankad@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250825-rpmh_rsc_change-v1-1-138202c31bf6@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/qcom/rpmh-rsc.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/soc/qcom/rpmh-rsc.c b/drivers/soc/qcom/rpmh-rsc.c
index 163a58eb02e0a..d0ec42ec0d041 100644
--- a/drivers/soc/qcom/rpmh-rsc.c
+++ b/drivers/soc/qcom/rpmh-rsc.c
@@ -453,13 +453,10 @@ static irqreturn_t tcs_tx_done(int irq, void *p)
 
 		trace_rpmh_tx_done(drv, i, req);
 
-		/*
-		 * If wake tcs was re-purposed for sending active
-		 * votes, clear AMC trigger & enable modes and
+		/* Clear AMC trigger & enable modes and
 		 * disable interrupt for this TCS
 		 */
-		if (!drv->tcs[ACTIVE_TCS].num_tcs)
-			__tcs_set_trigger(drv, i, false);
+		__tcs_set_trigger(drv, i, false);
 skip:
 		/* Reclaim the TCS */
 		write_tcs_reg(drv, drv->regs[RSC_DRV_CMD_ENABLE], i, 0);
-- 
2.51.0

[PATCH 6.6 023/196] pinctrl: meson-gxl: add missing i2c_d pinmux

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Da Xue <da@libre.computer>

[ Upstream commit d8c2a9edd181f0cc4a66eec954b3d8f6a1d954a7 ]

Amlogic GXL has 4 I2C attached to gpio-periphs. I2C_D is on GPIOX_10/11.

Add the relevant func 3 pinmux per the datasheet for S805X/S905X/S905D.

Fixes: 0f15f500ff2c ("pinctrl: meson: Add GXL pinctrl definitions")
Signed-off-by: Da Xue <da@libre.computer>
Link: https://lore.kernel.org/20250821233335.1707559-1-da@libre.computer
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/meson/pinctrl-meson-gxl.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxl.c b/drivers/pinctrl/meson/pinctrl-meson-gxl.c
index 51408996255bd..e2601e45935e6 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-gxl.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-gxl.c
@@ -187,6 +187,9 @@ static const unsigned int i2c_sda_c_pins[]	= { GPIODV_28 };
 static const unsigned int i2c_sck_c_dv19_pins[] = { GPIODV_19 };
 static const unsigned int i2c_sda_c_dv18_pins[] = { GPIODV_18 };
 
+static const unsigned int i2c_sck_d_pins[]	= { GPIOX_11 };
+static const unsigned int i2c_sda_d_pins[]	= { GPIOX_10 };
+
 static const unsigned int eth_mdio_pins[]	= { GPIOZ_0 };
 static const unsigned int eth_mdc_pins[]	= { GPIOZ_1 };
 static const unsigned int eth_clk_rx_clk_pins[] = { GPIOZ_2 };
@@ -411,6 +414,8 @@ static struct meson_pmx_group meson_gxl_periphs_groups[] = {
 	GPIO_GROUP(GPIO_TEST_N),
 
 	/* Bank X */
+	GROUP(i2c_sda_d,	5,	5),
+	GROUP(i2c_sck_d,	5,	4),
 	GROUP(sdio_d0,		5,	31),
 	GROUP(sdio_d1,		5,	30),
 	GROUP(sdio_d2,		5,	29),
@@ -651,6 +656,10 @@ static const char * const i2c_c_groups[] = {
 	"i2c_sck_c", "i2c_sda_c", "i2c_sda_c_dv18", "i2c_sck_c_dv19",
 };
 
+static const char * const i2c_d_groups[] = {
+	"i2c_sck_d", "i2c_sda_d",
+};
+
 static const char * const eth_groups[] = {
 	"eth_mdio", "eth_mdc", "eth_clk_rx_clk", "eth_rx_dv",
 	"eth_rxd0", "eth_rxd1", "eth_rxd2", "eth_rxd3",
@@ -777,6 +786,7 @@ static struct meson_pmx_func meson_gxl_periphs_functions[] = {
 	FUNCTION(i2c_a),
 	FUNCTION(i2c_b),
 	FUNCTION(i2c_c),
+	FUNCTION(i2c_d),
 	FUNCTION(eth),
 	FUNCTION(pwm_a),
 	FUNCTION(pwm_b),
-- 
2.51.0

[PATCH 6.6 024/196] blk-mq: check kobject state_in_sysfs before deleting in blk_mq_unregister_hctx

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Li Nan <linan122@huawei.com>

[ Upstream commit 4c7ef92f6d4d08a27d676e4c348f4e2922cab3ed ]

In __blk_mq_update_nr_hw_queues() the return value of
blk_mq_sysfs_register_hctxs() is not checked. If sysfs creation for hctx
fails, later changing the number of hw_queues or removing disk will
trigger the following warning:

  kernfs: can not remove 'nr_tags', no directory
  WARNING: CPU: 2 PID: 637 at fs/kernfs/dir.c:1707 kernfs_remove_by_name_ns+0x13f/0x160
  Call Trace:
   remove_files.isra.1+0x38/0xb0
   sysfs_remove_group+0x4d/0x100
   sysfs_remove_groups+0x31/0x60
   __kobject_del+0x23/0xf0
   kobject_del+0x17/0x40
   blk_mq_unregister_hctx+0x5d/0x80
   blk_mq_sysfs_unregister_hctxs+0x94/0xd0
   blk_mq_update_nr_hw_queues+0x124/0x760
   nullb_update_nr_hw_queues+0x71/0xf0 [null_blk]
   nullb_device_submit_queues_store+0x92/0x120 [null_blk]

kobjct_del() was called unconditionally even if sysfs creation failed.
Fix it by checkig the kobject creation statusbefore deleting it.

Fixes: 477e19dedc9d ("blk-mq: adjust debugfs and sysfs register when updating nr_hw_queues")
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250826084854.1030545-1-linan666@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/blk-mq-sysfs.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/block/blk-mq-sysfs.c b/block/blk-mq-sysfs.c
index 156e9bb07abf1..2fb234ab467b1 100644
--- a/block/blk-mq-sysfs.c
+++ b/block/blk-mq-sysfs.c
@@ -150,9 +150,11 @@ static void blk_mq_unregister_hctx(struct blk_mq_hw_ctx *hctx)
 		return;
 
 	hctx_for_each_ctx(hctx, ctx, i)
-		kobject_del(&ctx->kobj);
+		if (ctx->kobj.state_in_sysfs)
+			kobject_del(&ctx->kobj);
 
-	kobject_del(&hctx->kobj);
+	if (hctx->kobj.state_in_sysfs)
+		kobject_del(&hctx->kobj);
 }
 
 static int blk_mq_register_hctx(struct blk_mq_hw_ctx *hctx)
-- 
2.51.0

[PATCH 6.6 025/196] ARM: at91: pm: fix MCKx restore routine

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicolas Ferre <nicolas.ferre@microchip.com>

[ Upstream commit 296302d3d81360e09fa956e9be9edc8223b69a12 ]

The at91_mckx_ps_restore() assembly function is responsible for setting
back MCKx system bus clocks after exiting low power modes.

Fix a typo and use tmp3 variable instead of tmp2 to correctly set MCKx
to previously saved state.
Tmp2 was used without the needed changes in CSS and DIV. Moreover the
required bit 7, telling that MCR register's content is to be changed
(CMD/write), was not set.

Fix function comment to match tmp variables actually used.

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Fixes: 28eb1d40fe57 ("ARM: at91: pm: add support for MCK1..4 save/restore for ulp modes")
Link: https://lore.kernel.org/r/20250827145427.46819-3-nicolas.ferre@microchip.com
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
[claudiu.beznea: s/sate/state in commit description]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-at91/pm_suspend.S | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
index e5869cca5e791..94dece1839af3 100644
--- a/arch/arm/mach-at91/pm_suspend.S
+++ b/arch/arm/mach-at91/pm_suspend.S
@@ -872,7 +872,7 @@ e_done:
 /**
  * at91_mckx_ps_restore: restore MCK1..4 settings
  *
- * Side effects: overwrites tmp1, tmp2
+ * Side effects: overwrites tmp1, tmp2 and tmp3
  */
 .macro at91_mckx_ps_restore
 #ifdef CONFIG_SOC_SAMA7
@@ -916,7 +916,7 @@ r_ps:
 	bic	tmp3, tmp3, #AT91_PMC_MCR_V2_ID_MSK
 	orr	tmp3, tmp3, tmp1
 	orr	tmp3, tmp3, #AT91_PMC_MCR_V2_CMD
-	str	tmp2, [pmc, #AT91_PMC_MCR_V2]
+	str	tmp3, [pmc, #AT91_PMC_MCR_V2]
 
 	wait_mckrdy tmp1
 
-- 
2.51.0

[PATCH 6.6 026/196] arm64: dts: apple: t8103-j457: Fix PCIe ethernet iommu-map

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Janne Grunau <j@jannau.net>

[ Upstream commit 6e08cdd604edcec2c277af17c7d36caf827057ff ]

PCIe `port01` of t8103-j457 (iMac, M1, 2 USB-C ports, 2021) is unused
and disabled. Linux' PCI subsystem assigns the ethernet nic from
`port02` to bus 02. This results into assigning `pcie0_dart_1` from the
disabled port as iommu. The `pcie0_dart_1` instance is disabled and
probably fused off (it is on the M2 Pro Mac mini which has a disabled
PCIe port as well).
Without iommu the ethernet nic is not expected work.
Adjusts the "bus-range" and the PCIe devices "reg" property to PCI
subsystem's bus number.

Fixes: 7c77ab91b33d ("arm64: dts: apple: Add missing M1 (t8103) devices")
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Sven Peter <sven@kernel.org>
Signed-off-by: Janne Grunau <j@jannau.net>
Link: https://lore.kernel.org/r/20250823-apple-dt-sync-6-17-v2-1-6dc0daeb4786@jannau.net
Signed-off-by: Sven Peter <sven@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/apple/t8103-j457.dts | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/apple/t8103-j457.dts b/arch/arm64/boot/dts/apple/t8103-j457.dts
index 152f95fd49a21..7089ccf3ce556 100644
--- a/arch/arm64/boot/dts/apple/t8103-j457.dts
+++ b/arch/arm64/boot/dts/apple/t8103-j457.dts
@@ -21,6 +21,14 @@ aliases {
 	};
 };
 
+/*
+ * Adjust pcie0's iommu-map to account for the disabled port01.
+ */
+&pcie0 {
+	iommu-map = <0x100 &pcie0_dart_0 1 1>,
+			<0x200 &pcie0_dart_2 1 1>;
+};
+
 &bluetooth0 {
 	brcm,board-type = "apple,santorini";
 };
@@ -36,10 +44,10 @@ &wifi0 {
  */
 
 &port02 {
-	bus-range = <3 3>;
+	bus-range = <2 2>;
 	status = "okay";
 	ethernet0: ethernet@0,0 {
-		reg = <0x30000 0x0 0x0 0x0 0x0>;
+		reg = <0x20000 0x0 0x0 0x0 0x0>;
 		/* To be filled by the loader */
 		local-mac-address = [00 10 18 00 00 00];
 	};
-- 
2.51.0

[PATCH 6.6 027/196] regulator: scmi: Use int type to store negative error codes

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Qianfeng Rong <rongqianfeng@vivo.com>

[ Upstream commit 9d35d068fb138160709e04e3ee97fe29a6f8615b ]

Change the 'ret' variable from u32 to int to store negative error codes or
zero returned by of_property_read_u32().

Storing the negative error codes in unsigned type, doesn't cause an issue
at runtime but it's ugly as pants. Additionally, assigning negative error
codes to unsigned type may trigger a GCC warning when the -Wsign-conversion
flag is enabled.

No effect on runtime.

Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Fixes: 0fbeae70ee7c ("regulator: add SCMI driver")
Link: https://patch.msgid.link/20250829101411.625214-1-rongqianfeng@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/regulator/scmi-regulator.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/regulator/scmi-regulator.c b/drivers/regulator/scmi-regulator.c
index 29ab217297d6d..432654fbd7a12 100644
--- a/drivers/regulator/scmi-regulator.c
+++ b/drivers/regulator/scmi-regulator.c
@@ -257,7 +257,8 @@ static int process_scmi_regulator_of_node(struct scmi_device *sdev,
 					  struct device_node *np,
 					  struct scmi_regulator_info *rinfo)
 {
-	u32 dom, ret;
+	u32 dom;
+	int ret;
 
 	ret = of_property_read_u32(np, "reg", &dom);
 	if (ret)
-- 
2.51.0

[PATCH 6.6 028/196] selftests/nolibc: fix EXPECT_NZ macro

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Benjamin Berg <benjamin.berg@intel.com>

[ Upstream commit 6d33ce3634f99e0c6c9ce9fc111261f2c411cb48 ]

The expect non-zero macro was incorrect and never used. Fix its
definition.

Fixes: 362aecb2d8cfa ("selftests/nolibc: add basic infrastructure to ease creation of nolibc tests")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://lore.kernel.org/r/20250731201225.323254-2-benjamin@sipsolutions.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/nolibc/nolibc-test.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/tools/testing/selftests/nolibc/nolibc-test.c b/tools/testing/selftests/nolibc/nolibc-test.c
index 4aaafbfc2f973..a019de995e5df 100644
--- a/tools/testing/selftests/nolibc/nolibc-test.c
+++ b/tools/testing/selftests/nolibc/nolibc-test.c
@@ -176,8 +176,8 @@ int expect_zr(int expr, int llen)
 }
 
 
-#define EXPECT_NZ(cond, expr, val)			\
-	do { if (!(cond)) result(llen, SKIPPED); else ret += expect_nz(expr, llen; } while (0)
+#define EXPECT_NZ(cond, expr)				\
+	do { if (!(cond)) result(llen, SKIPPED); else ret += expect_nz(expr, llen); } while (0)
 
 static __attribute__((unused))
 int expect_nz(int expr, int llen)
-- 
2.51.0

[PATCH 6.6 029/196] block: use int to store blk_stack_limits() return value

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Qianfeng Rong <rongqianfeng@vivo.com>

[ Upstream commit b0b4518c992eb5f316c6e40ff186cbb7a5009518 ]

Change the 'ret' variable in blk_stack_limits() from unsigned int to int,
as it needs to store negative value -1.

Storing the negative error codes in unsigned type, or performing equality
comparisons (e.g., ret == -1), doesn't cause an issue at runtime [1] but
can be confusing.  Additionally, assigning negative error codes to unsigned
type may trigger a GCC warning when the -Wsign-conversion flag is enabled.

No effect on runtime.

Link: https://lore.kernel.org/all/x3wogjf6vgpkisdhg3abzrx7v7zktmdnfmqeih5kosszmagqfs@oh3qxrgzkikf/ #1
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Fixes: fe0b393f2c0a ("block: Correct handling of bottom device misaligment")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250902130930.68317-1-rongqianfeng@vivo.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/blk-settings.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/block/blk-settings.c b/block/blk-settings.c
index 021994f6d2d82..a891f27ff834d 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -553,7 +553,8 @@ static unsigned int blk_round_down_sectors(unsigned int sectors, unsigned int lb
 int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
 		     sector_t start)
 {
-	unsigned int top, bottom, alignment, ret = 0;
+	unsigned int top, bottom, alignment;
+	int ret = 0;
 
 	t->max_sectors = min_not_zero(t->max_sectors, b->max_sectors);
 	t->max_hw_sectors = min_not_zero(t->max_hw_sectors, b->max_hw_sectors);
-- 
2.51.0

[PATCH 6.6 030/196] PM: sleep: core: Clear power.must_resume in noirq suspend error path

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

[ Upstream commit be82483d1b60baf6747884bd74cb7de484deaf76 ]

If system suspend is aborted in the "noirq" phase (for instance, due to
an error returned by one of the device callbacks), power.is_noirq_suspended
will not be set for some devices and device_resume_noirq() will return
early for them.  Consequently, noirq resume callbacks will not run for
them at all because the noirq suspend callbacks have not run for them
yet.

If any of them has power.must_resume set and late suspend has been
skipped for it (due to power.smart_suspend), early resume should be
skipped for it either, or its state may become inconsistent (for
instance, if the early resume assumes that it will always follow
noirq resume).

Make that happen by clearing power.must_resume in device_resume_noirq()
for devices with power.is_noirq_suspended clear that have been left in
suspend by device_suspend_late(), which will subsequently cause
device_resume_early() to leave the device in suspend and avoid
changing its state.

Fixes: 0d4b54c6fee8 ("PM / core: Add LEAVE_SUSPENDED driver flag")
Link: https://lore.kernel.org/linux-pm/5d692b81-6f58-4e86-9cb0-ede69a09d799@rowland.harvard.edu/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/3381776.aeNJFYEL58@rafael.j.wysocki
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/base/power/main.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index baa31194cf20d..ef5157fc8dcc5 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -600,8 +600,20 @@ static void __device_resume_noirq(struct device *dev, pm_message_t state, bool a
 	if (dev->power.syscore || dev->power.direct_complete)
 		goto Out;
 
-	if (!dev->power.is_noirq_suspended)
+	if (!dev->power.is_noirq_suspended) {
+		/*
+		 * This means that system suspend has been aborted in the noirq
+		 * phase before invoking the noirq suspend callback for the
+		 * device, so if device_suspend_late() has left it in suspend,
+		 * device_resume_early() should leave it in suspend either in
+		 * case the early resume of it depends on the noirq resume that
+		 * has not run.
+		 */
+		if (dev_pm_skip_suspend(dev))
+			dev->power.must_resume = false;
+
 		goto Out;
+	}
 
 	if (!dpm_wait_for_superior(dev, async))
 		goto Out;
-- 
2.51.0

[PATCH 6.6 031/196] ARM: dts: ti: omap: am335x-baltos: Fix ti,en-ck32k-xtal property in DTS to use correct boolean syntax

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jihed Chaibi <jihed.chaibi.dev@gmail.com>

[ Upstream commit 9658a92fad1889ff92fa4bd668cd61052687245a ]

The ti,en-ck32k-xtal property, defined as a boolean in the Device Tree
schema, was incorrectly assigned a value (<1>) in the DTS file, causing
a validation error: "size (4) error for type flag". The driver uses
of_property_read_bool(), expecting a boolean. Remove the value to fix
the dtbs_check error.

Fixes: 262178b6b8e5 ("ARM: dts: split am335x-baltos-ir5221 into dts and dtsi files")
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Link: https://lore.kernel.org/all/20250822222530.113520-1-jihed.chaibi.dev@gmail.com/
Link: https://lore.kernel.org/r/20250822222530.113520-1-jihed.chaibi.dev@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi b/arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi
index c14d5b70c72f6..56f704082f94a 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi
@@ -270,7 +270,7 @@ &tps {
 	vcc7-supply = <&vbat>;
 	vccio-supply = <&vbat>;
 
-	ti,en-ck32k-xtal = <1>;
+	ti,en-ck32k-xtal;
 
 	regulators {
 		vrtc_reg: regulator@0 {
-- 
2.51.0

[PATCH 6.6 032/196] ARM: dts: ti: omap: omap3-devkit8000-lcd: Fix ti,keep-vref-on property to use correct boolean syntax in DTS

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jihed Chaibi <jihed.chaibi.dev@gmail.com>

[ Upstream commit 5af5b85505bc859adb338fe5d6e4842e72cdf932 ]

The ti,keep-vref-on property, defined as a boolean flag in the Device
Tree schema, was incorrectly assigned a value (<1>) in the DTS file,
causing a validation error: "size (4) error for type flag". Remove
the value to match the schema and ensure compatibility with the driver
using device_property_read_bool(). This fixes the dtbs_check error.

Fixes: ed05637c30e6 ("ARM: dts: omap3-devkit8000: Add ADS7846 Touchscreen support")
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Link: https://lore.kernel.org/r/20250822225052.136919-1-jihed.chaibi.dev@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/ti/omap/omap3-devkit8000-lcd-common.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/ti/omap/omap3-devkit8000-lcd-common.dtsi b/arch/arm/boot/dts/ti/omap/omap3-devkit8000-lcd-common.dtsi
index a7f99ae0c1fe9..78c657429f641 100644
--- a/arch/arm/boot/dts/ti/omap/omap3-devkit8000-lcd-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-devkit8000-lcd-common.dtsi
@@ -65,7 +65,7 @@ ads7846@0 {
 		ti,debounce-max = /bits/ 16 <10>;
 		ti,debounce-tol = /bits/ 16 <5>;
 		ti,debounce-rep = /bits/ 16 <1>;
-		ti,keep-vref-on = <1>;
+		ti,keep-vref-on;
 		ti,settle-delay-usec = /bits/ 16 <150>;
 
 		wakeup-source;
-- 
2.51.0

[PATCH 6.6 033/196] ARM: dts: omap: am335x-cm-t335: Remove unused mcasp num-serializer property

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jihed Chaibi <jihed.chaibi.dev@gmail.com>

[ Upstream commit 27322753c8b913fba05250e7b5abb1da31e6ed23 ]

The dtbs_check validation for am335x-cm-t335.dtb flags an error
for an unevaluated 'num-serializer' property in the mcasp0 node.

This property is obsolete; it is not defined in the davinci-mcasp-audio
schema and is not used by the corresponding (or any) driver.

Remove this unused property to fix the schema validation warning.

Fixes: 48ab364478e77 ("ARM: dts: cm-t335: add audio support")
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Link: https://lore.kernel.org/r/20250830215957.285694-1-jihed.chaibi.dev@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/ti/omap/am335x-cm-t335.dts | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm/boot/dts/ti/omap/am335x-cm-t335.dts b/arch/arm/boot/dts/ti/omap/am335x-cm-t335.dts
index 72990e7ffe10e..44718a4cec474 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-cm-t335.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-cm-t335.dts
@@ -483,8 +483,6 @@ &mcasp1 {
 
 		op-mode = <0>;          /* MCASP_IIS_MODE */
 		tdm-slots = <2>;
-		/* 16 serializers */
-		num-serializer = <16>;
 		serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
 			0 0 2 1 0 0 0 0 0 0 0 0 0 0 0 0
 		>;
-- 
2.51.0

[PATCH 6.6 034/196] PM / devfreq: mtk-cci: Fix potential error pointer dereference in probe()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@linaro.org>

[ Upstream commit fc33bf0e097c6834646b98a7b3da0ae5b617f0f9 ]

The drv->sram_reg pointer could be set to ERR_PTR(-EPROBE_DEFER) which
would lead to a error pointer dereference.  Use IS_ERR_OR_NULL() to check
that the pointer is valid.

Fixes: e09bd5757b52 ("PM / devfreq: mtk-cci: Handle sram regulator probe deferral")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://patchwork.kernel.org/project/linux-pm/patch/aJTNHz8kk8s6Q2os@stanley.mountain/
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/devfreq/mtk-cci-devfreq.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/devfreq/mtk-cci-devfreq.c b/drivers/devfreq/mtk-cci-devfreq.c
index 83a73f0ccd803..eff9b2c06aef4 100644
--- a/drivers/devfreq/mtk-cci-devfreq.c
+++ b/drivers/devfreq/mtk-cci-devfreq.c
@@ -385,7 +385,8 @@ static int mtk_ccifreq_probe(struct platform_device *pdev)
 out_free_resources:
 	if (regulator_is_enabled(drv->proc_reg))
 		regulator_disable(drv->proc_reg);
-	if (drv->sram_reg && regulator_is_enabled(drv->sram_reg))
+	if (!IS_ERR_OR_NULL(drv->sram_reg) &&
+	    regulator_is_enabled(drv->sram_reg))
 		regulator_disable(drv->sram_reg);
 
 	return ret;
-- 
2.51.0

[PATCH 6.6 035/196] power: supply: cw2015: Fix a alignment coding style issue

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Yan <andyshrk@163.com>

[ Upstream commit def5612170a8c6c4c6a3ea5bd6c3cfc8de6ba4b1 ]

Fix the checkpatch warning:
CHECK: Alignment should match open parenthesis

Fixes: 0cb172a4918e ("power: supply: cw2015: Use device managed API to simplify the code")
Signed-off-by: Andy Yan <andyshrk@163.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/power/supply/cw2015_battery.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/power/supply/cw2015_battery.c b/drivers/power/supply/cw2015_battery.c
index 99f3ccdc30a6a..434e3233c9f8c 100644
--- a/drivers/power/supply/cw2015_battery.c
+++ b/drivers/power/supply/cw2015_battery.c
@@ -702,8 +702,7 @@ static int cw_bat_probe(struct i2c_client *client)
 	if (!cw_bat->battery_workqueue)
 		return -ENOMEM;
 
-	devm_delayed_work_autocancel(&client->dev,
-							  &cw_bat->battery_delay_work, cw_bat_work);
+	devm_delayed_work_autocancel(&client->dev, &cw_bat->battery_delay_work, cw_bat_work);
 	queue_delayed_work(cw_bat->battery_workqueue,
 			   &cw_bat->battery_delay_work, msecs_to_jiffies(10));
 	return 0;
-- 
2.51.0

[PATCH 6.6 036/196] pinctrl: renesas: Use int type to store negative error codes

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Qianfeng Rong <rongqianfeng@vivo.com>

[ Upstream commit 9f062fc5b0ff44550088912ab89f9da40226a826 ]

Change the 'ret' variable in sh_pfc_pinconf_group_set() from unsigned
int to int, as it needs to store either negative error codes or zero
returned by sh_pfc_pinconf_set().

No effect on runtime.

Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Fixes: d0593c363f04ccc4 ("pinctrl: sh-pfc: Propagate errors on group config")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250831084958.431913-4-rongqianfeng@vivo.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/renesas/pinctrl.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/renesas/pinctrl.c b/drivers/pinctrl/renesas/pinctrl.c
index 4d9d58fc1356f..852e179f9e383 100644
--- a/drivers/pinctrl/renesas/pinctrl.c
+++ b/drivers/pinctrl/renesas/pinctrl.c
@@ -730,7 +730,8 @@ static int sh_pfc_pinconf_group_set(struct pinctrl_dev *pctldev, unsigned group,
 	struct sh_pfc_pinctrl *pmx = pinctrl_dev_get_drvdata(pctldev);
 	const unsigned int *pins;
 	unsigned int num_pins;
-	unsigned int i, ret;
+	unsigned int i;
+	int ret;
 
 	pins = pmx->pfc->info->groups[group].pins;
 	num_pins = pmx->pfc->info->groups[group].nr_pins;
-- 
2.51.0

[PATCH 6.6 037/196] null_blk: Fix the description of the cache_size module argument

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Genjian Zhang <zhanggenjian@kylinos.cn>

[ Upstream commit 7942b226e6b84df13b46b76c01d3b6e07a1b349e ]

When executing modinfo null_blk, there is an error in the description
of module parameter mbps, and the output information of cache_size is
incomplete.The output of modinfo before and after applying this patch
is as follows:

Before:
[...]
parm:           cache_size:ulong
[...]
parm:           mbps:Cache size in MiB for memory-backed device.
		Default: 0 (none) (uint)
[...]

After:
[...]
parm:           cache_size:Cache size in MiB for memory-backed device.
		Default: 0 (none) (ulong)
[...]
parm:           mbps:Limit maximum bandwidth (in MiB/s).
		Default: 0 (no limit) (uint)
[...]

Fixes: 058efe000b31 ("null_blk: add module parameters for 4 options")
Signed-off-by: Genjian Zhang <zhanggenjian@kylinos.cn>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/null_blk/main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/block/null_blk/main.c b/drivers/block/null_blk/main.c
index 97ed3bd9707f4..2dd254c720f5f 100644
--- a/drivers/block/null_blk/main.c
+++ b/drivers/block/null_blk/main.c
@@ -211,7 +211,7 @@ MODULE_PARM_DESC(discard, "Support discard operations (requires memory-backed nu
 
 static unsigned long g_cache_size;
 module_param_named(cache_size, g_cache_size, ulong, 0444);
-MODULE_PARM_DESC(mbps, "Cache size in MiB for memory-backed device. Default: 0 (none)");
+MODULE_PARM_DESC(cache_size, "Cache size in MiB for memory-backed device. Default: 0 (none)");
 
 static unsigned int g_mbps;
 module_param_named(mbps, g_mbps, uint, 0444);
-- 
2.51.0

[PATCH 6.6 038/196] arm64: dts: mediatek: mt8195: Remove suspend-breaking reset from pcie0

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Guoqing Jiang <guoqing.jiang@canonical.com>

[ Upstream commit 3374b5fb26b300809ecd6aed9f414987dd17c313 ]

When test suspend resume with 6.8 based kernel, system can't resume
and I got below error which can be also reproduced with 6.16 rc6+
kernel.

mtk-pcie-gen3 112f0000.pcie: PCIe link down, current LTSSM state: detect.quiet (0x0)
mtk-pcie-gen3 112f0000.pcie: PM: dpm_run_callback(): genpd_resume_noirq returns -110
mtk-pcie-gen3 112f0000.pcie: PM: failed to resume noirq: error -110

After investigation, looks pcie0 has the same problem as pcie1 as
decribed in commit 3d7fdd8e38aa ("arm64: dts: mediatek: mt8195:
Remove suspend-breaking reset from pcie1").

Fixes: ecc0af6a3fe6 ("arm64: dts: mt8195: Add pcie and pcie phy nodes")
Signed-off-by: Guoqing Jiang <guoqing.jiang@canonical.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Macpaul Lin <macpaul.lin@mediatek.com>
Link: https://lore.kernel.org/r/20250721095959.57703-1-guoqing.jiang@canonical.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/mediatek/mt8195.dtsi | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index 22604d3abde3b..4b701afe995e2 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -1524,9 +1524,6 @@ pcie0: pcie@112f0000 {
 
 			power-domains = <&spm MT8195_POWER_DOMAIN_PCIE_MAC_P0>;
 
-			resets = <&infracfg_ao MT8195_INFRA_RST2_PCIE_P0_SWRST>;
-			reset-names = "mac";
-
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0 0 0 1 &pcie_intc0 0>,
-- 
2.51.0

[PATCH 6.6 039/196] nbd: restrict sockets to TCP and UDP

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 9f7c02e031570e8291a63162c6c046dc15ff85b0 ]

Recently, syzbot started to abuse NBD with all kinds of sockets.

Commit cf1b2326b734 ("nbd: verify socket is supported during setup")
made sure the socket supported a shutdown() method.

Explicitely accept TCP and UNIX stream sockets.

Fixes: cf1b2326b734 ("nbd: verify socket is supported during setup")
Reported-by: syzbot+e1cd6bd8493060bd701d@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/CANn89iJ+76eE3A_8S_zTpSyW5hvPRn6V57458hCZGY5hbH_bFA@mail.gmail.com/T/#m081036e8747cd7e2626c1da5d78c8b9d1e55b154
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Richard W.M. Jones <rjones@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Yu Kuai <yukuai1@huaweicloud.com>
Cc: linux-block@vger.kernel.org
Cc: nbd@other.debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/nbd.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index 3742ddf46c55a..27a05b1521f69 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -1128,6 +1128,14 @@ static struct socket *nbd_get_socket(struct nbd_device *nbd, unsigned long fd,
 	if (!sock)
 		return NULL;
 
+	if (!sk_is_tcp(sock->sk) &&
+	    !sk_is_stream_unix(sock->sk)) {
+		dev_err(disk_to_dev(nbd->disk), "Unsupported socket: should be TCP or UNIX.\n");
+		*err = -EINVAL;
+		sockfd_put(sock);
+		return NULL;
+	}
+
 	if (sock->ops->shutdown == sock_no_shutdown) {
 		dev_err(disk_to_dev(nbd->disk), "Unsupported socket: shutdown callout must be supported.\n");
 		*err = -EINVAL;
-- 
2.51.0

[PATCH 6.6 040/196] firmware: firmware: meson-sm: fix compile-test default

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

[ Upstream commit 0454346d1c5f7fccb3ef6e3103985de8ab3469f3 ]

Enabling compile testing should not enable every individual driver (we
have "allyesconfig" for that).

Fixes: 4a434abc40d2 ("firmware: meson-sm: enable build as module")
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20250725075429.10056-1-johan@kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/meson/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/firmware/meson/Kconfig b/drivers/firmware/meson/Kconfig
index f2fdd37566482..179f5d46d8ddf 100644
--- a/drivers/firmware/meson/Kconfig
+++ b/drivers/firmware/meson/Kconfig
@@ -5,7 +5,7 @@
 config MESON_SM
 	tristate "Amlogic Secure Monitor driver"
 	depends on ARCH_MESON || COMPILE_TEST
-	default y
+	default ARCH_MESON
 	depends on ARM64_4K_PAGES
 	help
 	  Say y here to enable the Amlogic secure monitor driver
-- 
2.51.0

[PATCH 6.6 041/196] cpuidle: qcom-spm: fix device and OF node leaks at probe

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

[ Upstream commit cdc06f912670c8c199d5fa9e78b64b7ed8e871d0 ]

Make sure to drop the reference to the saw device taken by
of_find_device_by_node() after retrieving its driver data during
probe().

Also drop the reference to the CPU node sooner to avoid leaking it in
case there is no saw node or device.

Fixes: 60f3692b5f0b ("cpuidle: qcom_spm: Detach state machine from main SPM handling")
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpuidle/cpuidle-qcom-spm.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/cpuidle/cpuidle-qcom-spm.c b/drivers/cpuidle/cpuidle-qcom-spm.c
index 1fc9968eae199..b6b06a510fd86 100644
--- a/drivers/cpuidle/cpuidle-qcom-spm.c
+++ b/drivers/cpuidle/cpuidle-qcom-spm.c
@@ -96,20 +96,23 @@ static int spm_cpuidle_register(struct device *cpuidle_dev, int cpu)
 		return -ENODEV;
 
 	saw_node = of_parse_phandle(cpu_node, "qcom,saw", 0);
+	of_node_put(cpu_node);
 	if (!saw_node)
 		return -ENODEV;
 
 	pdev = of_find_device_by_node(saw_node);
 	of_node_put(saw_node);
-	of_node_put(cpu_node);
 	if (!pdev)
 		return -ENODEV;
 
 	data = devm_kzalloc(cpuidle_dev, sizeof(*data), GFP_KERNEL);
-	if (!data)
+	if (!data) {
+		put_device(&pdev->dev);
 		return -ENOMEM;
+	}
 
 	data->spm = dev_get_drvdata(&pdev->dev);
+	put_device(&pdev->dev);
 	if (!data->spm)
 		return -EINVAL;
 
-- 
2.51.0

[PATCH 6.6 042/196] arm64: dts: mediatek: mt6331: Fix pmic, regulators, rtc, keys node names

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

[ Upstream commit 98967109c9c0e2de4140827628c63f96314099ab ]

The node names for "pmic", "regulators", "rtc", and "keys" are
dictated by the PMIC MFD binding: change those to adhere to it.

Fixes: aef783f3e0ca ("arm64: dts: mediatek: Add MT6331 PMIC devicetree")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Fei Shao <fshao@chromium.org>
Link: https://lore.kernel.org/r/20250724083914.61351-17-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/mediatek/mt6331.dtsi | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt6331.dtsi b/arch/arm64/boot/dts/mediatek/mt6331.dtsi
index d89858c73ab1b..243afbffa21fd 100644
--- a/arch/arm64/boot/dts/mediatek/mt6331.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6331.dtsi
@@ -6,12 +6,12 @@
 #include <dt-bindings/input/input.h>
 
 &pwrap {
-	pmic: mt6331 {
+	pmic: pmic {
 		compatible = "mediatek,mt6331";
 		interrupt-controller;
 		#interrupt-cells = <2>;
 
-		mt6331regulator: mt6331regulator {
+		mt6331regulator: regulators {
 			compatible = "mediatek,mt6331-regulator";
 
 			mt6331_vdvfs11_reg: buck-vdvfs11 {
@@ -258,7 +258,7 @@ mt6331_vrtc_reg: ldo-vrtc {
 			};
 
 			mt6331_vdig18_reg: ldo-vdig18 {
-				regulator-name = "dvdd18_dig";
+				regulator-name = "vdig18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-ramp-delay = <0>;
@@ -266,11 +266,11 @@ mt6331_vdig18_reg: ldo-vdig18 {
 			};
 		};
 
-		mt6331rtc: mt6331rtc {
+		mt6331rtc: rtc {
 			compatible = "mediatek,mt6331-rtc";
 		};
 
-		mt6331keys: mt6331keys {
+		mt6331keys: keys {
 			compatible = "mediatek,mt6331-keys";
 			power {
 				linux,keycodes = <KEY_POWER>;
-- 
2.51.0

[PATCH 6.6 043/196] arm64: dts: mediatek: mt6795-xperia-m5: Fix mmc0 latch-ck value

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

[ Upstream commit 236681fb64102f25ed11df55999e6985c1bc2f7d ]

Change the latch-ck value from 0x14 to 4: as only bits [0-3] are
actually used, the final value that gets written to the register
field for DAT_LATCH_CK_SEL is just 0x4.

This also fixes dtbs_check warnings.

Fixes: 5a65dcccf483 ("arm64: dts: mediatek: mt6795-xperia-m5: Add eMMC, MicroSD slot, SDIO")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250724083914.61351-21-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts b/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
index b5746e6d0b15a..110fae4ec11c9 100644
--- a/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
+++ b/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
@@ -136,7 +136,7 @@ proximity@48 {
 
 &mmc0 {
 	/* eMMC controller */
-	mediatek,latch-ck = <0x14>; /* hs400 */
+	mediatek,latch-ck = <4>; /* hs400 */
 	mediatek,hs200-cmd-int-delay = <1>;
 	mediatek,hs400-cmd-int-delay = <1>;
 	mediatek,hs400-ds-dly3 = <0x1a>;
-- 
2.51.0

[PATCH 6.6 044/196] arm64: dts: mediatek: mt8516-pumpkin: Fix machine compatible

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

[ Upstream commit ffe6a5d1dd4d4d8af0779526cf4e40522647b25f ]

This devicetree contained only the SoC compatible but lacked the
machine specific one: add a "mediatek,mt8516-pumpkin" compatible
to the list to fix dtbs_check warnings.

Fixes: 9983822c8cf9 ("arm64: dts: mediatek: add pumpkin board dts")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Fei Shao <fshao@chromium.org>
Link: https://lore.kernel.org/r/20250724083914.61351-39-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/mediatek/mt8516-pumpkin.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt8516-pumpkin.dts b/arch/arm64/boot/dts/mediatek/mt8516-pumpkin.dts
index cce642c538128..3d3db33a64dc6 100644
--- a/arch/arm64/boot/dts/mediatek/mt8516-pumpkin.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8516-pumpkin.dts
@@ -11,7 +11,7 @@
 
 / {
 	model = "Pumpkin MT8516";
-	compatible = "mediatek,mt8516";
+	compatible = "mediatek,mt8516-pumpkin", "mediatek,mt8516";
 
 	memory@40000000 {
 		device_type = "memory";
-- 
2.51.0

[PATCH 6.6 045/196] pwm: tiehrpwm: Fix corner case in clock divisor calculation

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Uwe Kleine-König <u.kleine-koenig@baylibre.com>

[ Upstream commit 00f83f0e07e44e2f1fb94b223e77ab7b18ee2d7d ]

The function set_prescale_div() is responsible for calculating the clock
divisor settings such that the input clock rate is divided down such that
the required period length is at most 0x10000 clock ticks. If period_cycles
is an integer multiple of 0x10000, the divisor period_cycles / 0x10000 is
good enough. So round up in the calculation of the required divisor and
compare it using >= instead of >.

Fixes: 19891b20e7c2 ("pwm: pwm-tiehrpwm: PWM driver support for EHRPWM")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/85488616d7bfcd9c32717651d0be7e330e761b9c.1754927682.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pwm/pwm-tiehrpwm.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pwm/pwm-tiehrpwm.c b/drivers/pwm/pwm-tiehrpwm.c
index ecbfd7e954ecb..d693b2d65cccf 100644
--- a/drivers/pwm/pwm-tiehrpwm.c
+++ b/drivers/pwm/pwm-tiehrpwm.c
@@ -167,7 +167,7 @@ static int set_prescale_div(unsigned long rqst_prescaler, u16 *prescale_div,
 
 			*prescale_div = (1 << clkdiv) *
 					(hspclkdiv ? (hspclkdiv * 2) : 1);
-			if (*prescale_div > rqst_prescaler) {
+			if (*prescale_div >= rqst_prescaler) {
 				*tb_clk_div = (clkdiv << TBCTL_CLKDIV_SHIFT) |
 					(hspclkdiv << TBCTL_HSPCLKDIV_SHIFT);
 				return 0;
@@ -266,7 +266,7 @@ static int ehrpwm_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	pc->period_cycles[pwm->hwpwm] = period_cycles;
 
 	/* Configure clock prescaler to support Low frequency PWM wave */
-	if (set_prescale_div(period_cycles/PERIOD_MAX, &ps_divval,
+	if (set_prescale_div(DIV_ROUND_UP(period_cycles, PERIOD_MAX), &ps_divval,
 			     &tb_divval)) {
 		dev_err(chip->dev, "Unsupported values\n");
 		return -EINVAL;
-- 
2.51.0

[PATCH 6.6 046/196] ACPICA: Fix largest possible resource descriptor index

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dmitry Antipov <dmantipov@yandex.ru>

[ Upstream commit 8ca944fea4d6d9019e01f2d6f6e766f315a9d73f ]

ACPI_RESOURCE_NAME_LARGE_MAX should be equal to the last actually
used resource descriptor index (ACPI_RESOURCE_NAME_CLOCK_INPUT).

Otherwise 'resource_index' in 'acpi_ut_validate_resource()' may be
clamped incorrectly and resulting value may issue an out-of-bounds
access for 'acpi_gbl_resource_types' array. Compile tested only.

Fixes: 520d4a0ee5b6 ("ACPICA: add support for ClockInput resource (v6.5)")
Link: https://github.com/acpica/acpica/commit/cf00116c
Link: https://marc.info/?l=linux-acpi&m=175449676131260&w=2
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/acpica/aclocal.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h
index 82563b44af351..261dc8f87556d 100644
--- a/drivers/acpi/acpica/aclocal.h
+++ b/drivers/acpi/acpica/aclocal.h
@@ -1139,7 +1139,7 @@ struct acpi_port_info {
 #define ACPI_RESOURCE_NAME_PIN_GROUP_FUNCTION   0x91
 #define ACPI_RESOURCE_NAME_PIN_GROUP_CONFIG     0x92
 #define ACPI_RESOURCE_NAME_CLOCK_INPUT          0x93
-#define ACPI_RESOURCE_NAME_LARGE_MAX            0x94
+#define ACPI_RESOURCE_NAME_LARGE_MAX            0x93
 
 /*****************************************************************************
  *
-- 
2.51.0

[PATCH 6.6 047/196] nvmet-fc: move lsop put work to nvmet_fc_ls_req_op

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Wagner <wagi@kernel.org>

[ Upstream commit db5a5406fb7e5337a074385c7a3e53c77f2c1bd3 ]

It’s possible for more than one async command to be in flight from
__nvmet_fc_send_ls_req. For each command, a tgtport reference is taken.

In the current code, only one put work item is queued at a time, which
results in a leaked reference.

To fix this, move the work item to the nvmet_fc_ls_req_op struct, which
already tracks all resources related to the command.

Fixes: 710c69dbaccd ("nvmet-fc: avoid deadlock on delete association path")
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/target/fc.c | 19 +++++++++----------
 1 file changed, 9 insertions(+), 10 deletions(-)

diff --git a/drivers/nvme/target/fc.c b/drivers/nvme/target/fc.c
index 570c58d2b5a58..a15e764bae35b 100644
--- a/drivers/nvme/target/fc.c
+++ b/drivers/nvme/target/fc.c
@@ -54,6 +54,8 @@ struct nvmet_fc_ls_req_op {		/* for an LS RQST XMT */
 	int				ls_error;
 	struct list_head		lsreq_list; /* tgtport->ls_req_list */
 	bool				req_queued;
+
+	struct work_struct		put_work;
 };
 
 
@@ -111,8 +113,6 @@ struct nvmet_fc_tgtport {
 	struct nvmet_fc_port_entry	*pe;
 	struct kref			ref;
 	u32				max_sg_cnt;
-
-	struct work_struct		put_work;
 };
 
 struct nvmet_fc_port_entry {
@@ -236,12 +236,13 @@ static int nvmet_fc_tgt_a_get(struct nvmet_fc_tgt_assoc *assoc);
 static void nvmet_fc_tgt_q_put(struct nvmet_fc_tgt_queue *queue);
 static int nvmet_fc_tgt_q_get(struct nvmet_fc_tgt_queue *queue);
 static void nvmet_fc_tgtport_put(struct nvmet_fc_tgtport *tgtport);
-static void nvmet_fc_put_tgtport_work(struct work_struct *work)
+static void nvmet_fc_put_lsop_work(struct work_struct *work)
 {
-	struct nvmet_fc_tgtport *tgtport =
-		container_of(work, struct nvmet_fc_tgtport, put_work);
+	struct nvmet_fc_ls_req_op *lsop =
+		container_of(work, struct nvmet_fc_ls_req_op, put_work);
 
-	nvmet_fc_tgtport_put(tgtport);
+	nvmet_fc_tgtport_put(lsop->tgtport);
+	kfree(lsop);
 }
 static int nvmet_fc_tgtport_get(struct nvmet_fc_tgtport *tgtport);
 static void nvmet_fc_handle_fcp_rqst(struct nvmet_fc_tgtport *tgtport,
@@ -368,7 +369,7 @@ __nvmet_fc_finish_ls_req(struct nvmet_fc_ls_req_op *lsop)
 				  DMA_BIDIRECTIONAL);
 
 out_putwork:
-	queue_work(nvmet_wq, &tgtport->put_work);
+	queue_work(nvmet_wq, &lsop->put_work);
 }
 
 static int
@@ -389,6 +390,7 @@ __nvmet_fc_send_ls_req(struct nvmet_fc_tgtport *tgtport,
 	lsreq->done = done;
 	lsop->req_queued = false;
 	INIT_LIST_HEAD(&lsop->lsreq_list);
+	INIT_WORK(&lsop->put_work, nvmet_fc_put_lsop_work);
 
 	lsreq->rqstdma = fc_dma_map_single(tgtport->dev, lsreq->rqstaddr,
 				  lsreq->rqstlen + lsreq->rsplen,
@@ -448,8 +450,6 @@ nvmet_fc_disconnect_assoc_done(struct nvmefc_ls_req *lsreq, int status)
 	__nvmet_fc_finish_ls_req(lsop);
 
 	/* fc-nvme target doesn't care about success or failure of cmd */
-
-	kfree(lsop);
 }
 
 /*
@@ -1407,7 +1407,6 @@ nvmet_fc_register_targetport(struct nvmet_fc_port_info *pinfo,
 	kref_init(&newrec->ref);
 	ida_init(&newrec->assoc_cnt);
 	newrec->max_sg_cnt = template->max_sgl_segments;
-	INIT_WORK(&newrec->put_work, nvmet_fc_put_tgtport_work);
 
 	ret = nvmet_fc_alloc_ls_iodlist(newrec);
 	if (ret) {
-- 
2.51.0

[PATCH 6.6 048/196] i3c: master: svc: Use manual response for IBI events

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stanley Chu <yschu@nuvoton.com>

[ Upstream commit a7869b0a2540fd122eccec00ae7d4243166b0a60 ]

Driver wants to nack the IBI request when the target is not in the
known address list. In below code, svc_i3c_master_nack_ibi() will
cause undefined behavior when using AUTOIBI with auto response rule,
because hw always auto ack the IBI request.

    switch (ibitype) {
    case SVC_I3C_MSTATUS_IBITYPE_IBI:
            dev = svc_i3c_master_dev_from_addr(master, ibiaddr);
            if (!dev || !is_events_enabled(master, SVC_I3C_EVENT_IBI))
                    svc_i3c_master_nack_ibi(master);
            ...
            break;

AutoIBI has another issue that the controller doesn't quit AutoIBI state
after IBIWON polling timeout when there is a SDA glitch(high->low->high).
1. SDA high->low: raising an interrupt to execute IBI ISR
2. SDA low->high
3. Driver writes an AutoIBI request
4. AutoIBI process does not start because SDA is not low
5. IBIWON polling times out
6. Controller reamins in AutoIBI state and doesn't accept EmitStop request

Emitting broadcast address with IBIRESP_MANUAL avoids both issues.

Fixes: dd3c52846d59 ("i3c: master: svc: Add Silvaco I3C master driver")
Signed-off-by: Stanley Chu <yschu@nuvoton.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250829012309.3562585-2-yschu@nuvoton.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i3c/master/svc-i3c-master.c | 30 ++++++++++++++++++++++++-----
 1 file changed, 25 insertions(+), 5 deletions(-)

diff --git a/drivers/i3c/master/svc-i3c-master.c b/drivers/i3c/master/svc-i3c-master.c
index d1630d47ef6fc..1cfc8f480d15c 100644
--- a/drivers/i3c/master/svc-i3c-master.c
+++ b/drivers/i3c/master/svc-i3c-master.c
@@ -430,9 +430,24 @@ static void svc_i3c_master_ibi_work(struct work_struct *work)
 	 */
 	writel(SVC_I3C_MINT_IBIWON, master->regs + SVC_I3C_MSTATUS);
 
-	/* Acknowledge the incoming interrupt with the AUTOIBI mechanism */
-	writel(SVC_I3C_MCTRL_REQUEST_AUTO_IBI |
-	       SVC_I3C_MCTRL_IBIRESP_AUTO,
+	/*
+	 * Write REQUEST_START_ADDR request to emit broadcast address for arbitration,
+	 * instend of using AUTO_IBI.
+	 *
+	 * Using AutoIBI request may cause controller to remain in AutoIBI state when
+	 * there is a glitch on SDA line (high->low->high).
+	 * 1. SDA high->low, raising an interrupt to execute IBI isr.
+	 * 2. SDA low->high.
+	 * 3. IBI isr writes an AutoIBI request.
+	 * 4. The controller will not start AutoIBI process because SDA is not low.
+	 * 5. IBIWON polling times out.
+	 * 6. Controller reamins in AutoIBI state and doesn't accept EmitStop request.
+	 */
+	writel(SVC_I3C_MCTRL_REQUEST_START_ADDR |
+	       SVC_I3C_MCTRL_TYPE_I3C |
+	       SVC_I3C_MCTRL_IBIRESP_MANUAL |
+	       SVC_I3C_MCTRL_DIR(SVC_I3C_MCTRL_DIR_WRITE) |
+	       SVC_I3C_MCTRL_ADDR(I3C_BROADCAST_ADDR),
 	       master->regs + SVC_I3C_MCTRL);
 
 	/* Wait for IBIWON, should take approximately 100us */
@@ -452,10 +467,15 @@ static void svc_i3c_master_ibi_work(struct work_struct *work)
 	switch (ibitype) {
 	case SVC_I3C_MSTATUS_IBITYPE_IBI:
 		dev = svc_i3c_master_dev_from_addr(master, ibiaddr);
-		if (!dev || !is_events_enabled(master, SVC_I3C_EVENT_IBI))
+		if (!dev || !is_events_enabled(master, SVC_I3C_EVENT_IBI)) {
 			svc_i3c_master_nack_ibi(master);
-		else
+		} else {
+			if (dev->info.bcr & I3C_BCR_IBI_PAYLOAD)
+				svc_i3c_master_ack_ibi(master, true);
+			else
+				svc_i3c_master_ack_ibi(master, false);
 			svc_i3c_master_handle_ibi(master, dev);
+		}
 		break;
 	case SVC_I3C_MSTATUS_IBITYPE_HOT_JOIN:
 		if (is_events_enabled(master, SVC_I3C_EVENT_HOTJOIN))
-- 
2.51.0

[PATCH 6.6 049/196] i3c: master: svc: Recycle unused IBI slot

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stanley Chu <stanley.chuys@gmail.com>

[ Upstream commit 3448a934ba6f803911ac084d05a2ffce507ea6c6 ]

In svc_i3c_master_handle_ibi(), an IBI slot is fetched from the pool
to store the IBI payload. However, when an error condition is encountered,
the function returns without recycling the IBI slot, resulting in an IBI
slot leak.

Fixes: c85e209b799f ("i3c: master: svc: fix ibi may not return mandatory data byte")
Signed-off-by: Stanley Chu <yschu@nuvoton.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250829012309.3562585-3-yschu@nuvoton.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i3c/master/svc-i3c-master.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/i3c/master/svc-i3c-master.c b/drivers/i3c/master/svc-i3c-master.c
index 1cfc8f480d15c..277884b5e1ca4 100644
--- a/drivers/i3c/master/svc-i3c-master.c
+++ b/drivers/i3c/master/svc-i3c-master.c
@@ -369,6 +369,7 @@ static int svc_i3c_master_handle_ibi(struct svc_i3c_master *master,
 						SVC_I3C_MSTATUS_COMPLETE(val), 0, 1000);
 	if (ret) {
 		dev_err(master->dev, "Timeout when polling for COMPLETE\n");
+		i3c_generic_ibi_recycle_slot(data->ibi_pool, slot);
 		return ret;
 	}
 
-- 
2.51.0

[PATCH 6.6 050/196] selftests: watchdog: skip ping loop if WDIOF_KEEPALIVEPING not supported

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Akhilesh Patil <akhilesh@ee.iitb.ac.in>

[ Upstream commit e8cfc524eaf3c0ed88106177edb6961e202e6716 ]

Check if watchdog device supports WDIOF_KEEPALIVEPING option before
entering keep_alive() ping test loop. Fix watchdog-test silently looping
if ioctl based ping is not supported by the device. Exit from test in
such case instead of getting stuck in loop executing failing keep_alive()

watchdog_info:
 identity:              m41t93 rtc Watchdog
 firmware_version:      0
Support/Status: Set timeout (in seconds)
Support/Status: Watchdog triggers a management or other external alarm not a reboot

Watchdog card disabled.
Watchdog timeout set to 5 seconds.
Watchdog ping rate set to 2 seconds.
Watchdog card enabled.
WDIOC_KEEPALIVE not supported by this device

without this change
Watchdog card disabled.
Watchdog timeout set to 5 seconds.
Watchdog ping rate set to 2 seconds.
Watchdog card enabled.
Watchdog Ticking Away!
(Where test stuck here forver silently)

Updated change log at commit time:
Shuah Khan <skhan@linuxfoundation.org>

Link: https://lore.kernel.org/r/20250914152840.GA3047348@bhairav-test.ee.iitb.ac.in
Fixes: d89d08ffd2c5 ("selftests: watchdog: Fix ioctl SET* error paths to take oneshot exit path")
Signed-off-by: Akhilesh Patil <akhilesh@ee.iitb.ac.in>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/watchdog/watchdog-test.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/tools/testing/selftests/watchdog/watchdog-test.c b/tools/testing/selftests/watchdog/watchdog-test.c
index a1f506ba55786..4f09c5db0c7f3 100644
--- a/tools/testing/selftests/watchdog/watchdog-test.c
+++ b/tools/testing/selftests/watchdog/watchdog-test.c
@@ -332,6 +332,12 @@ int main(int argc, char *argv[])
 	if (oneshot)
 		goto end;
 
+	/* Check if WDIOF_KEEPALIVEPING is supported */
+	if (!(info.options & WDIOF_KEEPALIVEPING)) {
+		printf("WDIOC_KEEPALIVE not supported by this device\n");
+		goto end;
+	}
+
 	printf("Watchdog Ticking Away!\n");
 
 	/*
-- 
2.51.0

[PATCH 6.6 051/196] bpf: Explicitly check accesses to bpf_sock_addr

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paul Chaignon <paul.chaignon@gmail.com>

[ Upstream commit 6fabca2fc94d33cdf7ec102058983b086293395f ]

Syzkaller found a kernel warning on the following sock_addr program:

    0: r0 = 0
    1: r2 = *(u32 *)(r1 +60)
    2: exit

which triggers:

    verifier bug: error during ctx access conversion (0)

This is happening because offset 60 in bpf_sock_addr corresponds to an
implicit padding of 4 bytes, right after msg_src_ip4. Access to this
padding isn't rejected in sock_addr_is_valid_access and it thus later
fails to convert the access.

This patch fixes it by explicitly checking the various fields of
bpf_sock_addr in sock_addr_is_valid_access.

I checked the other ctx structures and is_valid_access functions and
didn't find any other similar cases. Other cases of (properly handled)
padding are covered in new tests in a subsequent patch.

Fixes: 1cedee13d25a ("bpf: Hooks for sys_sendmsg")
Reported-by: syzbot+136ca59d411f92e821b7@syzkaller.appspotmail.com
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Closes: https://syzkaller.appspot.com/bug?extid=136ca59d411f92e821b7
Link: https://lore.kernel.org/bpf/b58609d9490649e76e584b0361da0abd3c2c1779.1758094761.git.paul.chaignon@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/filter.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/net/core/filter.c b/net/core/filter.c
index 7afb7658c3883..b6dbcef649654 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -9156,13 +9156,17 @@ static bool sock_addr_is_valid_access(int off, int size,
 			return false;
 		info->reg_type = PTR_TO_SOCKET;
 		break;
-	default:
-		if (type == BPF_READ) {
-			if (size != size_default)
-				return false;
-		} else {
+	case bpf_ctx_range(struct bpf_sock_addr, user_family):
+	case bpf_ctx_range(struct bpf_sock_addr, family):
+	case bpf_ctx_range(struct bpf_sock_addr, type):
+	case bpf_ctx_range(struct bpf_sock_addr, protocol):
+		if (type != BPF_READ)
 			return false;
-		}
+		if (size != size_default)
+			return false;
+		break;
+	default:
+		return false;
 	}
 
 	return true;
-- 
2.51.0

[PATCH 6.6 052/196] smp: Fix up and expand the smp_call_function_many() kerneldoc

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

[ Upstream commit ccf09357ffef2ab472369ab9cdf470c9bc9b821a ]

The smp_call_function_many() kerneldoc comment got out of sync with the
function definition (bool parameter "wait" is incorrectly described as a
bitmask in it), so fix it up by copying the "wait" description from the
smp_call_function() kerneldoc and add information regarding the handling
of the local CPU to it.

Fixes: 49b3bd213a9f ("smp: Fix all kernel-doc warnings")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/smp.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/kernel/smp.c b/kernel/smp.c
index 3eeffeaf5450c..13b376c7296a5 100644
--- a/kernel/smp.c
+++ b/kernel/smp.c
@@ -862,16 +862,15 @@ static void smp_call_function_many_cond(const struct cpumask *mask,
  * @mask: The set of cpus to run on (only runs on online subset).
  * @func: The function to run. This must be fast and non-blocking.
  * @info: An arbitrary pointer to pass to the function.
- * @wait: Bitmask that controls the operation. If %SCF_WAIT is set, wait
- *        (atomically) until function has completed on other CPUs. If
- *        %SCF_RUN_LOCAL is set, the function will also be run locally
- *        if the local CPU is set in the @cpumask.
- *
- * If @wait is true, then returns once @func has returned.
+ * @wait: If true, wait (atomically) until function has completed
+ *        on other CPUs.
  *
  * You must not call this function with disabled interrupts or from a
  * hardware interrupt handler or from a bottom half handler. Preemption
  * must be disabled when calling this function.
+ *
+ * @func is not called on the local CPU even if @mask contains it.  Consider
+ * using on_each_cpu_cond_mask() instead if this is not desirable.
  */
 void smp_call_function_many(const struct cpumask *mask,
 			    smp_call_func_t func, void *info, bool wait)
-- 
2.51.0

[PATCH 6.6 053/196] tools/nolibc: make time_t robust if __kernel_old_time_t is missing in host headers

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Zhouyi Zhou <zhouzhouyi@gmail.com>

[ Upstream commit 0ff52df6b32a6b04a7c9dfe3d7a387aff215b482 ]

Commit d5094bcb5bfd ("tools/nolibc: define time_t in terms of
__kernel_old_time_t") made nolibc use the kernel's time type so that
`time_t` matches `timespec::tv_sec` on all ABIs (notably x32).

But since __kernel_old_time_t is fairly new, notably from 2020 in commit
94c467ddb273 ("y2038: add __kernel_old_timespec and __kernel_old_time_t"),
nolibc builds that rely on host headers may fail.

Switch to __kernel_time_t, which is the same as __kernel_old_time_t and
has existed for longer.

Tested in PPC VM of Open Source Lab of Oregon State University
(./tools/testing/selftests/rcutorture/bin/mkinitrd.sh)

Fixes: d5094bcb5bfd ("tools/nolibc: define time_t in terms of __kernel_old_time_t")
Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
[Thomas: Reformat commit and its message a bit]
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/include/nolibc/std.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/include/nolibc/std.h b/tools/include/nolibc/std.h
index a9d8b5b51f37f..f24953f8b949c 100644
--- a/tools/include/nolibc/std.h
+++ b/tools/include/nolibc/std.h
@@ -33,6 +33,6 @@ typedef unsigned long       nlink_t;
 typedef   signed long         off_t;
 typedef   signed long     blksize_t;
 typedef   signed long      blkcnt_t;
-typedef __kernel_old_time_t  time_t;
+typedef __kernel_time_t      time_t;
 
 #endif /* _NOLIBC_STD_H */
-- 
2.51.0

[PATCH 6.6 054/196] once: fix race by moving DO_ONCE to separate section

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Qi Xi <xiqi2@huawei.com>

[ Upstream commit edcc8a38b5ac1a3dbd05e113a38a25b937ebefe5 ]

The commit c2c60ea37e5b ("once: use __section(".data.once")") moved
DO_ONCE's ___done variable to .data.once section, which conflicts with
DO_ONCE_LITE() that also uses the same section.

This creates a race condition when clear_warn_once is used:

Thread 1 (DO_ONCE)             Thread 2 (DO_ONCE)
__do_once_start
    read ___done (false)
    acquire once_lock
execute func
__do_once_done
    write ___done (true)      __do_once_start
    release once_lock             // Thread 3 clear_warn_once reset ___done
                                  read ___done (false)
                                  acquire once_lock
                              execute func
schedule once_work            __do_once_done
once_deferred: OK             write ___done (true)
static_branch_disable         release once_lock
                              schedule once_work
                              once_deferred:
                                  BUG_ON(!static_key_enabled)

DO_ONCE_LITE() in once_lite.h is used by WARN_ON_ONCE() and other warning
macros. Keep its ___done flag in the .data..once section and allow resetting
by clear_warn_once, as originally intended.

In contrast, DO_ONCE() is used for functions like get_random_once() and
relies on its ___done flag for internal synchronization. We should not reset
DO_ONCE() by clear_warn_once.

Fix it by isolating DO_ONCE's ___done into a separate .data..do_once section,
shielding it from clear_warn_once.

Fixes: c2c60ea37e5b ("once: use __section(".data.once")")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qi Xi <xiqi2@huawei.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/asm-generic/vmlinux.lds.h | 1 +
 include/linux/once.h              | 4 ++--
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index cf3f8b9bf43f0..010ac18c05916 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -351,6 +351,7 @@
 	__start_once = .;						\
 	*(.data..once)							\
 	__end_once = .;							\
+	*(.data..do_once)						\
 	STRUCT_ALIGN();							\
 	*(__tracepoints)						\
 	/* implement dynamic printk debug */				\
diff --git a/include/linux/once.h b/include/linux/once.h
index 30346fcdc7995..449a0e34ad5ad 100644
--- a/include/linux/once.h
+++ b/include/linux/once.h
@@ -46,7 +46,7 @@ void __do_once_sleepable_done(bool *done, struct static_key_true *once_key,
 #define DO_ONCE(func, ...)						     \
 	({								     \
 		bool ___ret = false;					     \
-		static bool __section(".data..once") ___done = false;	     \
+		static bool __section(".data..do_once") ___done = false;     \
 		static DEFINE_STATIC_KEY_TRUE(___once_key);		     \
 		if (static_branch_unlikely(&___once_key)) {		     \
 			unsigned long ___flags;				     \
@@ -64,7 +64,7 @@ void __do_once_sleepable_done(bool *done, struct static_key_true *once_key,
 #define DO_ONCE_SLEEPABLE(func, ...)						\
 	({									\
 		bool ___ret = false;						\
-		static bool __section(".data..once") ___done = false;		\
+		static bool __section(".data..do_once") ___done = false;	\
 		static DEFINE_STATIC_KEY_TRUE(___once_key);			\
 		if (static_branch_unlikely(&___once_key)) {			\
 			___ret = __do_once_sleepable_start(&___done);		\
-- 
2.51.0

[PATCH 6.6 055/196] hwmon: (mlxreg-fan) Separate methods of fan setting coming from different subsystems

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vadim Pasternak <vadimp@nvidia.com>

[ Upstream commit c02e4644f8ac9c501077ef5ac53ae7fc51472d49 ]

Distinct between fan speed setting request coming for hwmon and
thermal subsystems.

There are fields 'last_hwmon_state' and 'last_thermal_state' in the
structure 'mlxreg_fan_pwm', which respectively store the cooling state
set by the 'hwmon' and 'thermal' subsystem.
The purpose is to make arbitration of fan speed setting. For example, if
fan speed required to be not lower than some limit, such setting is to
be performed through 'hwmon' subsystem, thus 'thermal' subsystem will
not set fan below this limit.

Currently, the 'last_thermal_state' is also be updated by 'hwmon' causing
cooling state to never be set to a lower value.

Eliminate update of 'last_thermal_state', when request is coming from
'hwmon' subsystem.

Fixes: da74944d3a46 ("hwmon: (mlxreg-fan) Use pwm attribute for setting fan speed low limit")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20250113084859.27064-2-vadimp@nvidia.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/mlxreg-fan.c | 24 ++++++++++++++++--------
 1 file changed, 16 insertions(+), 8 deletions(-)

diff --git a/drivers/hwmon/mlxreg-fan.c b/drivers/hwmon/mlxreg-fan.c
index c25a54d5b39ad..0ba9195c9d713 100644
--- a/drivers/hwmon/mlxreg-fan.c
+++ b/drivers/hwmon/mlxreg-fan.c
@@ -113,8 +113,8 @@ struct mlxreg_fan {
 	int divider;
 };
 
-static int mlxreg_fan_set_cur_state(struct thermal_cooling_device *cdev,
-				    unsigned long state);
+static int _mlxreg_fan_set_cur_state(struct thermal_cooling_device *cdev,
+				     unsigned long state, bool thermal);
 
 static int
 mlxreg_fan_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
@@ -224,8 +224,9 @@ mlxreg_fan_write(struct device *dev, enum hwmon_sensor_types type, u32 attr,
 				 * last thermal state.
 				 */
 				if (pwm->last_hwmon_state >= pwm->last_thermal_state)
-					return mlxreg_fan_set_cur_state(pwm->cdev,
-									pwm->last_hwmon_state);
+					return _mlxreg_fan_set_cur_state(pwm->cdev,
+									 pwm->last_hwmon_state,
+									 false);
 				return 0;
 			}
 			return regmap_write(fan->regmap, pwm->reg, val);
@@ -357,9 +358,8 @@ static int mlxreg_fan_get_cur_state(struct thermal_cooling_device *cdev,
 	return 0;
 }
 
-static int mlxreg_fan_set_cur_state(struct thermal_cooling_device *cdev,
-				    unsigned long state)
-
+static int _mlxreg_fan_set_cur_state(struct thermal_cooling_device *cdev,
+				     unsigned long state, bool thermal)
 {
 	struct mlxreg_fan_pwm *pwm = cdev->devdata;
 	struct mlxreg_fan *fan = pwm->fan;
@@ -369,7 +369,8 @@ static int mlxreg_fan_set_cur_state(struct thermal_cooling_device *cdev,
 		return -EINVAL;
 
 	/* Save thermal state. */
-	pwm->last_thermal_state = state;
+	if (thermal)
+		pwm->last_thermal_state = state;
 
 	state = max_t(unsigned long, state, pwm->last_hwmon_state);
 	err = regmap_write(fan->regmap, pwm->reg,
@@ -381,6 +382,13 @@ static int mlxreg_fan_set_cur_state(struct thermal_cooling_device *cdev,
 	return 0;
 }
 
+static int mlxreg_fan_set_cur_state(struct thermal_cooling_device *cdev,
+				    unsigned long state)
+
+{
+	return _mlxreg_fan_set_cur_state(cdev, state, true);
+}
+
 static const struct thermal_cooling_device_ops mlxreg_fan_cooling_ops = {
 	.get_max_state	= mlxreg_fan_get_max_state,
 	.get_cur_state	= mlxreg_fan_get_cur_state,
-- 
2.51.0

[PATCH 6.6 056/196] thermal/drivers/qcom: Make LMH select QCOM_SCM

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>

[ Upstream commit 57eda47bd14b0c2876f2db42e757c57b7a671965 ]

The QCOM_SCM symbol is not user-visible, so it makes little sense to
depend on it. Make LMH driver select QCOM_SCM as all other drivers do
and, as the dependecy is now correctly handled, enable || COMPILE_TEST
in order to include the driver into broader set of build tests.

Fixes: 9e5a4fb84230 ("thermal/drivers/qcom/lmh: make QCOM_LMH depends on QCOM_SCM")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20250728-lmh-scm-v2-1-33bc58388ca5@oss.qualcomm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thermal/qcom/Kconfig | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/thermal/qcom/Kconfig b/drivers/thermal/qcom/Kconfig
index 2c7f3f9a26ebb..a6bb01082ec69 100644
--- a/drivers/thermal/qcom/Kconfig
+++ b/drivers/thermal/qcom/Kconfig
@@ -34,7 +34,8 @@ config QCOM_SPMI_TEMP_ALARM
 
 config QCOM_LMH
 	tristate "Qualcomm Limits Management Hardware"
-	depends on ARCH_QCOM && QCOM_SCM
+	depends on ARCH_QCOM || COMPILE_TEST
+	select QCOM_SCM
 	help
 	  This enables initialization of Qualcomm limits management
 	  hardware(LMh). LMh allows for hardware-enforced mitigation for cpus based on
-- 
2.51.0

[PATCH 6.6 057/196] thermal/drivers/qcom/lmh: Add missing IRQ includes

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>

[ Upstream commit b50b2c53f98fcdb6957e184eb488c16502db9575 ]

As reported by LKP, the Qualcomm LMH driver needs to include several
IRQ-related headers, which decrlare necessary IRQ functionality.
Currently driver builds on ARM64 platforms, where the headers are pulled
in implicitly by other headers, but fails to build on other platforms.

Fixes: 53bca371cdf7 ("thermal/drivers/qcom: Add support for LMh driver")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202507270042.KdK0KKht-lkp@intel.com/
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20250728-lmh-scm-v2-2-33bc58388ca5@oss.qualcomm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thermal/qcom/lmh.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/thermal/qcom/lmh.c b/drivers/thermal/qcom/lmh.c
index d2d49264cf83a..7c299184c59b1 100644
--- a/drivers/thermal/qcom/lmh.c
+++ b/drivers/thermal/qcom/lmh.c
@@ -5,6 +5,8 @@
  */
 #include <linux/module.h>
 #include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqdesc.h>
 #include <linux/irqdomain.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
-- 
2.51.0

[PATCH 6.6 058/196] i2c: mediatek: fix potential incorrect use of I2C_MASTER_WRRD

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Leilk.Liu <leilk.liu@mediatek.com>

[ Upstream commit b492183652808e0f389272bf63dc836241b287ff ]

The old IC does not support the I2C_MASTER_WRRD (write-then-read)
function, but the current code’s handling of i2c->auto_restart may
potentially lead to entering the I2C_MASTER_WRRD software flow,
resulting in unexpected bugs.

Instead of repurposing the auto_restart flag, add a separate flag
to signal I2C_MASTER_WRRD operations.

Also fix handling of msgs. If the operation (i2c->op) is
I2C_MASTER_WRRD, then the msgs pointer is incremented by 2.
For all other operations, msgs is simply incremented by 1.

Fixes: b2ed11e224a2 ("I2C: mediatek: Add driver for MediaTek MT8173 I2C controller")
Signed-off-by: Leilk.Liu <leilk.liu@mediatek.com>
Suggested-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-mt65xx.c | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 1a9b5a068ef1b..6b788bca64d54 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -1243,6 +1243,7 @@ static int mtk_i2c_transfer(struct i2c_adapter *adap,
 {
 	int ret;
 	int left_num = num;
+	bool write_then_read_en = false;
 	struct mtk_i2c *i2c = i2c_get_adapdata(adap);
 
 	ret = clk_bulk_enable(I2C_MT65XX_CLK_MAX, i2c->clocks);
@@ -1256,6 +1257,7 @@ static int mtk_i2c_transfer(struct i2c_adapter *adap,
 		if (!(msgs[0].flags & I2C_M_RD) && (msgs[1].flags & I2C_M_RD) &&
 		    msgs[0].addr == msgs[1].addr) {
 			i2c->auto_restart = 0;
+			write_then_read_en = true;
 		}
 	}
 
@@ -1280,12 +1282,10 @@ static int mtk_i2c_transfer(struct i2c_adapter *adap,
 		else
 			i2c->op = I2C_MASTER_WR;
 
-		if (!i2c->auto_restart) {
-			if (num > 1) {
-				/* combined two messages into one transaction */
-				i2c->op = I2C_MASTER_WRRD;
-				left_num--;
-			}
+		if (write_then_read_en) {
+			/* combined two messages into one transaction */
+			i2c->op = I2C_MASTER_WRRD;
+			left_num--;
 		}
 
 		/* always use DMA mode. */
@@ -1293,7 +1293,10 @@ static int mtk_i2c_transfer(struct i2c_adapter *adap,
 		if (ret < 0)
 			goto err_exit;
 
-		msgs++;
+		if (i2c->op == I2C_MASTER_WRRD)
+			msgs += 2;
+		else
+			msgs++;
 	}
 	/* the return value is number of executed messages */
 	ret = num;
-- 
2.51.0

[PATCH 6.6 059/196] i2c: designware: Fix clock issue when PM is disabled

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>

[ Upstream commit 70e633bedeeb4a7290d3b1dd9d49cc2bae25a46f ]

When the driver is removed, the clocks are first enabled by
calling pm_runtime_get_sync(), and then disabled with
pm_runtime_put_sync().

If CONFIG_PM=y, clocks for this controller are disabled when it's in
the idle state. So the clocks are properly disabled when the driver
exits.

Othewise, the clocks are always enabled and the PM functions have
no effect. Therefore, the driver exits without disabling the clocks.

    # cat /sys/kernel/debug/clk/clk-pclk/clk_enable_count
    18
    # echo 1214a000.i2c > /sys/bus/platform/drivers/i2c_designware/bind
    # cat /sys/kernel/debug/clk/clk-pclk/clk_enable_count
    20
    # echo 1214a000.i2c > /sys/bus/platform/drivers/i2c_designware/unbind
    # cat /sys/kernel/debug/clk/clk-pclk/clk_enable_count
    20

To ensure that the clocks can be disabled correctly even without
CONFIG_PM=y, should add the following fixes:

- Replace with pm_runtime_put_noidle(), which only decrements the runtime
  PM usage count.
- Call i2c_dw_prepare_clk(false) to explicitly disable the clocks.

Fixes: 7272194ed391f ("i2c-designware: add minimal support for runtime PM")
Co-developed-by: Kohei Ito <ito.kohei@socionext.com>
Signed-off-by: Kohei Ito <ito.kohei@socionext.com>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-designware-platdrv.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 1ebcf5673a06b..ca6e1991ad13f 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -411,9 +411,11 @@ static void dw_i2c_plat_remove(struct platform_device *pdev)
 	i2c_dw_disable(dev);
 
 	pm_runtime_dont_use_autosuspend(device);
-	pm_runtime_put_sync(device);
+	pm_runtime_put_noidle(device);
 	dw_i2c_plat_pm_cleanup(dev);
 
+	i2c_dw_prepare_clk(dev, false);
+
 	i2c_dw_remove_lock_support(dev);
 
 	reset_control_assert(dev->rst);
-- 
2.51.0

[PATCH 6.6 060/196] i2c: designware: Add disabling clocks when probe fails

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>

[ Upstream commit c149841b069ccc6e480b00e11f35a57b5d88c7bb ]

After an error occurs during probing state, dw_i2c_plat_pm_cleanup() is
called. However, this function doesn't disable clocks and the clock-enable
count keeps increasing. Should disable these clocks explicitly.

Fixes: 7272194ed391f ("i2c-designware: add minimal support for runtime PM")
Co-developed-by: Kohei Ito <ito.kohei@socionext.com>
Signed-off-by: Kohei Ito <ito.kohei@socionext.com>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-designware-platdrv.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index ca6e1991ad13f..e6fa6cb1011ab 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -394,6 +394,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 
 exit_probe:
 	dw_i2c_plat_pm_cleanup(dev);
+	i2c_dw_prepare_clk(dev, false);
 exit_reset:
 	reset_control_assert(dev->rst);
 	return ret;
-- 
2.51.0

[PATCH 6.6 061/196] bpf: Enforce expected_attach_type for tailcall compatibility

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Borkmann <daniel@iogearbox.net>

[ Upstream commit 4540aed51b12bc13364149bf95f6ecef013197c0 ]

Yinhao et al. recently reported:

  Our fuzzer tool discovered an uninitialized pointer issue in the
  bpf_prog_test_run_xdp() function within the Linux kernel's BPF subsystem.
  This leads to a NULL pointer dereference when a BPF program attempts to
  deference the txq member of struct xdp_buff object.

The test initializes two programs of BPF_PROG_TYPE_XDP: progA acts as the
entry point for bpf_prog_test_run_xdp() and its expected_attach_type can
neither be of be BPF_XDP_DEVMAP nor BPF_XDP_CPUMAP. progA calls into a slot
of a tailcall map it owns. progB's expected_attach_type must be BPF_XDP_DEVMAP
to pass xdp_is_valid_access() validation. The program returns struct xdp_md's
egress_ifindex, and the latter is only allowed to be accessed under mentioned
expected_attach_type. progB is then inserted into the tailcall which progA
calls.

The underlying issue goes beyond XDP though. Another example are programs
of type BPF_PROG_TYPE_CGROUP_SOCK_ADDR. sock_addr_is_valid_access() as well
as sock_addr_func_proto() have different logic depending on the programs'
expected_attach_type. Similarly, a program attached to BPF_CGROUP_INET4_GETPEERNAME
should not be allowed doing a tailcall into a program which calls bpf_bind()
out of BPF which is only enabled for BPF_CGROUP_INET4_CONNECT.

In short, specifying expected_attach_type allows to open up additional
functionality or restrictions beyond what the basic bpf_prog_type enables.
The use of tailcalls must not violate these constraints. Fix it by enforcing
expected_attach_type in __bpf_prog_map_compatible().

Note that we only enforce this for tailcall maps, but not for BPF devmaps or
cpumaps: There, the programs are invoked through dev_map_bpf_prog_run*() and
cpu_map_bpf_prog_run*() which set up a new environment / context and therefore
these situations are not prone to this issue.

Fixes: 5e43f899b03a ("bpf: Check attach type at prog load time")
Reported-by: Yinhao Hu <dddddd@hust.edu.cn>
Reported-by: Kaiyan Mei <M202472210@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20250926171201.188490-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/bpf.h | 1 +
 kernel/bpf/core.c   | 5 +++++
 2 files changed, 6 insertions(+)

diff --git a/include/linux/bpf.h b/include/linux/bpf.h
index 83da9c81fa86a..0af6b2a5273ad 100644
--- a/include/linux/bpf.h
+++ b/include/linux/bpf.h
@@ -269,6 +269,7 @@ struct bpf_map_owner {
 	bool xdp_has_frags;
 	u64 storage_cookie[MAX_BPF_CGROUP_STORAGE_TYPE];
 	const struct btf_type *attach_func_proto;
+	enum bpf_attach_type expected_attach_type;
 };
 
 struct bpf_map {
diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c
index 3618be05fc352..a343248c35ded 100644
--- a/kernel/bpf/core.c
+++ b/kernel/bpf/core.c
@@ -2279,6 +2279,7 @@ static bool __bpf_prog_map_compatible(struct bpf_map *map,
 		map->owner->type  = prog_type;
 		map->owner->jited = fp->jited;
 		map->owner->xdp_has_frags = aux->xdp_has_frags;
+		map->owner->expected_attach_type = fp->expected_attach_type;
 		map->owner->attach_func_proto = aux->attach_func_proto;
 		for_each_cgroup_storage_type(i) {
 			map->owner->storage_cookie[i] =
@@ -2290,6 +2291,10 @@ static bool __bpf_prog_map_compatible(struct bpf_map *map,
 		ret = map->owner->type  == prog_type &&
 		      map->owner->jited == fp->jited &&
 		      map->owner->xdp_has_frags == aux->xdp_has_frags;
+		if (ret &&
+		    map->map_type == BPF_MAP_TYPE_PROG_ARRAY &&
+		    map->owner->expected_attach_type != fp->expected_attach_type)
+			ret = false;
 		for_each_cgroup_storage_type(i) {
 			if (!ret)
 				break;
-- 
2.51.0

[PATCH 6.6 062/196] drm/panel: novatek-nt35560: Fix invalid return value

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Brigham Campbell <me@brighamcampbell.com>

[ Upstream commit 125459e19ec654924e472f3ff5aeea40358dbebf ]

Fix bug in nt35560_set_brightness() which causes the function to
erroneously report an error. mipi_dsi_dcs_write() returns either a
negative value when an error occurred or a positive number of bytes
written when no error occurred. The buggy code reports an error under
either condition.

Fixes: 8152c2bfd780 ("drm/panel: Add driver for Sony ACX424AKP panel")
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Brigham Campbell <me@brighamcampbell.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250731032343.1258366-2-me@brighamcampbell.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/panel/panel-novatek-nt35560.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/panel/panel-novatek-nt35560.c b/drivers/gpu/drm/panel/panel-novatek-nt35560.c
index 5bbea734123bc..ee04c55175bb8 100644
--- a/drivers/gpu/drm/panel/panel-novatek-nt35560.c
+++ b/drivers/gpu/drm/panel/panel-novatek-nt35560.c
@@ -161,7 +161,7 @@ static int nt35560_set_brightness(struct backlight_device *bl)
 		par = 0x00;
 		ret = mipi_dsi_dcs_write(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY,
 					 &par, 1);
-		if (ret) {
+		if (ret < 0) {
 			dev_err(nt->dev, "failed to disable display backlight (%d)\n", ret);
 			return ret;
 		}
-- 
2.51.0

[PATCH 6.6 063/196] drm/radeon/r600_cs: clean up of dead code in r600_cs

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Brahmajit Das <listout@listout.xyz>

[ Upstream commit 260dcf5b06d519bcf27a5dfdb5c626821a55c170 ]

GCC 16 enables -Werror=unused-but-set-variable= which results in build
error with the following message.

drivers/gpu/drm/radeon/r600_cs.c: In function ‘r600_texture_size’:
drivers/gpu/drm/radeon/r600_cs.c:1411:29: error: variable ‘level’ set but not used [-Werror=unused-but-set-variable=]
 1411 |         unsigned offset, i, level;
      |                             ^~~~~
cc1: all warnings being treated as errors
make[6]: *** [scripts/Makefile.build:287: drivers/gpu/drm/radeon/r600_cs.o] Error 1

level although is set, but in never used in the function
r600_texture_size. Thus resulting in dead code and this error getting
triggered.

Fixes: 60b212f8ddcd ("drm/radeon: overhaul texture checking. (v3)")
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Brahmajit Das <listout@listout.xyz>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/radeon/r600_cs.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c
index ac77d1246b945..811265648a582 100644
--- a/drivers/gpu/drm/radeon/r600_cs.c
+++ b/drivers/gpu/drm/radeon/r600_cs.c
@@ -1408,7 +1408,7 @@ static void r600_texture_size(unsigned nfaces, unsigned blevel, unsigned llevel,
 			      unsigned block_align, unsigned height_align, unsigned base_align,
 			      unsigned *l0_size, unsigned *mipmap_size)
 {
-	unsigned offset, i, level;
+	unsigned offset, i;
 	unsigned width, height, depth, size;
 	unsigned blocksize;
 	unsigned nbx, nby;
@@ -1420,7 +1420,7 @@ static void r600_texture_size(unsigned nfaces, unsigned blevel, unsigned llevel,
 	w0 = r600_mip_minify(w0, 0);
 	h0 = r600_mip_minify(h0, 0);
 	d0 = r600_mip_minify(d0, 0);
-	for(i = 0, offset = 0, level = blevel; i < nlevels; i++, level++) {
+	for (i = 0, offset = 0; i < nlevels; i++) {
 		width = r600_mip_minify(w0, i);
 		nbx = r600_fmt_get_nblocksx(format, width);
 
-- 
2.51.0

[PATCH 6.6 064/196] f2fs: fix condition in __allow_reserved_blocks()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chao Yu <chao@kernel.org>

[ Upstream commit e75ce117905d2830976a289e718470f3230fa30a ]

If reserve_root mount option is not assigned, __allow_reserved_blocks()
will return false, it's not correct, fix it.

Fixes: 7e65be49ed94 ("f2fs: add reserved blocks for root user")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/f2fs.h | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
index 7329f706da83c..ab2ddd09d8131 100644
--- a/fs/f2fs/f2fs.h
+++ b/fs/f2fs/f2fs.h
@@ -2296,8 +2296,6 @@ static inline bool __allow_reserved_blocks(struct f2fs_sb_info *sbi,
 {
 	if (!inode)
 		return true;
-	if (!test_opt(sbi, RESERVE_ROOT))
-		return false;
 	if (IS_NOQUOTA(inode))
 		return true;
 	if (uid_eq(F2FS_OPTION(sbi).s_resuid, current_fsuid()))
@@ -2318,7 +2316,7 @@ static inline unsigned int get_available_block_count(struct f2fs_sb_info *sbi,
 	avail_user_block_count = sbi->user_block_count -
 					sbi->current_reserved_blocks;
 
-	if (!__allow_reserved_blocks(sbi, inode, cap))
+	if (test_opt(sbi, RESERVE_ROOT) && !__allow_reserved_blocks(sbi, inode, cap))
 		avail_user_block_count -= F2FS_OPTION(sbi).root_reserved_blocks;
 
 	if (unlikely(is_sbi_flag_set(sbi, SBI_CP_DISABLED))) {
-- 
2.51.0

[PATCH 6.6 065/196] drm/bridge: it6505: select REGMAP_I2C

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chia-I Wu <olvaffe@gmail.com>

[ Upstream commit 21b137f651cf9d981e22d2c60a2a8105f50a6361 ]

Fix

  aarch64-linux-gnu-ld: drivers/gpu/drm/bridge/ite-it6505.o: in function `it6505_i2c_probe':
  ite-it6505.c:(.text+0x754): undefined reference to `__devm_regmap_init_i2c'

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Fixes: b5c84a9edcd4 ("drm/bridge: add it6505 driver")
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20250610235825.3113075-1-olvaffe@gmail.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bridge/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index 3e6a4e2044c0e..5a4d574b37b89 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -85,6 +85,7 @@ config DRM_ITE_IT6505
 	select EXTCON
 	select CRYPTO
 	select CRYPTO_HASH
+	select REGMAP_I2C
 	help
 	  ITE IT6505 DisplayPort bridge chip driver.
 
-- 
2.51.0

[PATCH 6.6 066/196] media: zoran: Remove zoran_fh structure

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jacopo Mondi <jacopo.mondi@ideasonboard.com>

[ Upstream commit dc322d13cf417552b59e313e809a6da40b8b36ef ]

The zoran_fh structure is a wrapper around v4l2_fh. Its usage has been
mostly removed by commit 83f89a8bcbc3 ("media: zoran: convert to vb2"),
but the structure stayed by mistake. It is now used in a single
location, assigned from a void pointer and then recast to a void
pointer, without being every accessed. Drop it.

Fixes: 83f89a8bcbc3 ("media: zoran: convert to vb2")
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/pci/zoran/zoran.h        | 6 ------
 drivers/media/pci/zoran/zoran_driver.c | 3 +--
 2 files changed, 1 insertion(+), 8 deletions(-)

diff --git a/drivers/media/pci/zoran/zoran.h b/drivers/media/pci/zoran/zoran.h
index 56340553b2823..63592c4f9ed8c 100644
--- a/drivers/media/pci/zoran/zoran.h
+++ b/drivers/media/pci/zoran/zoran.h
@@ -154,12 +154,6 @@ struct zoran_jpg_settings {
 
 struct zoran;
 
-/* zoran_fh contains per-open() settings */
-struct zoran_fh {
-	struct v4l2_fh fh;
-	struct zoran *zr;
-};
-
 struct card_info {
 	enum card_type type;
 	char name[32];
diff --git a/drivers/media/pci/zoran/zoran_driver.c b/drivers/media/pci/zoran/zoran_driver.c
index fa672cc8bc678..feb39854a989e 100644
--- a/drivers/media/pci/zoran/zoran_driver.c
+++ b/drivers/media/pci/zoran/zoran_driver.c
@@ -511,12 +511,11 @@ static int zoran_s_fmt_vid_cap(struct file *file, void *__fh,
 			       struct v4l2_format *fmt)
 {
 	struct zoran *zr = video_drvdata(file);
-	struct zoran_fh *fh = __fh;
 	int i;
 	int res = 0;
 
 	if (fmt->fmt.pix.pixelformat == V4L2_PIX_FMT_MJPEG)
-		return zoran_s_fmt_vid_out(file, fh, fmt);
+		return zoran_s_fmt_vid_out(file, __fh, fmt);
 
 	for (i = 0; i < NUM_FORMATS; i++)
 		if (fmt->fmt.pix.pixelformat == zoran_formats[i].fourcc)
-- 
2.51.0

[PATCH 6.6 067/196] phy: rockchip: naneng-combphy: Enable U3 OTG port for RK3568

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jonas Karlman <jonas@kwiboo.se>

[ Upstream commit 7bb14b61b7d03db770b7e8871493f5b9b2be2b79 ]

The boot firmware may disable the U3 port early during boot and leave it
up to the controller or PHY driver to re-enable U3 when needed.

The Rockchip USBDP PHY driver currently does this for RK3576 and RK3588,
something the Rockchip Naneng Combo PHY driver never does for RK3568.
This may result in USB 3.0 ports being limited to only using USB 2.0 or
in special cases not working at all on RK3568.

Write to PIPE_GRF USB3OTGx_CON1 reg to ensure the U3 port is enabled
when a PHY with PHY_TYPE_USB3 mode is used.

Fixes: 7160820d742a ("phy: rockchip: add naneng combo phy for RK3568")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20250723072324.2246498-1-jonas@kwiboo.se
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/phy/rockchip/phy-rockchip-naneng-combphy.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
index 2354ce8b21594..9ef496092b7e6 100644
--- a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
+++ b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
@@ -122,6 +122,8 @@ struct rockchip_combphy_grfcfg {
 	struct combphy_reg pipe_xpcs_phy_ready;
 	struct combphy_reg pipe_pcie1l0_sel;
 	struct combphy_reg pipe_pcie1l1_sel;
+	struct combphy_reg u3otg0_port_en;
+	struct combphy_reg u3otg1_port_en;
 };
 
 struct rockchip_combphy_cfg {
@@ -431,6 +433,14 @@ static int rk3568_combphy_cfg(struct rockchip_combphy_priv *priv)
 		rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_txcomp_sel, false);
 		rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_txelec_sel, false);
 		rockchip_combphy_param_write(priv->phy_grf, &cfg->usb_mode_set, true);
+		switch (priv->id) {
+		case 0:
+			rockchip_combphy_param_write(priv->pipe_grf, &cfg->u3otg0_port_en, true);
+			break;
+		case 1:
+			rockchip_combphy_param_write(priv->pipe_grf, &cfg->u3otg1_port_en, true);
+			break;
+		}
 		break;
 
 	case PHY_TYPE_SATA:
@@ -574,6 +584,8 @@ static const struct rockchip_combphy_grfcfg rk3568_combphy_grfcfgs = {
 	/* pipe-grf */
 	.pipe_con0_for_sata	= { 0x0000, 15, 0, 0x00, 0x2220 },
 	.pipe_xpcs_phy_ready	= { 0x0040, 2, 2, 0x00, 0x01 },
+	.u3otg0_port_en		= { 0x0104, 15, 0, 0x0181, 0x1100 },
+	.u3otg1_port_en		= { 0x0144, 15, 0, 0x0181, 0x1100 },
 };
 
 static const struct rockchip_combphy_cfg rk3568_combphy_cfgs = {
-- 
2.51.0

[PATCH 6.6 068/196] usb: host: max3421-hcd: Fix error pointer dereference in probe cleanup

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@linaro.org>

[ Upstream commit 186e8f2bdba551f3ae23396caccd452d985c23e3 ]

The kthread_run() function returns error pointers so the
max3421_hcd->spi_thread pointer can be either error pointers or NULL.
Check for both before dereferencing it.

Fixes: 05dfa5c9bc37 ("usb: host: max3421-hcd: fix "spi_rd8" uses dynamic stack allocation warning")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/aJTMVAPtRe5H6jug@stanley.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/host/max3421-hcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/host/max3421-hcd.c b/drivers/usb/host/max3421-hcd.c
index cc1f579f02de1..2d792ab271e2a 100644
--- a/drivers/usb/host/max3421-hcd.c
+++ b/drivers/usb/host/max3421-hcd.c
@@ -1916,7 +1916,7 @@ max3421_probe(struct spi_device *spi)
 	if (hcd) {
 		kfree(max3421_hcd->tx);
 		kfree(max3421_hcd->rx);
-		if (max3421_hcd->spi_thread)
+		if (!IS_ERR_OR_NULL(max3421_hcd->spi_thread))
 			kthread_stop(max3421_hcd->spi_thread);
 		usb_put_hcd(hcd);
 	}
-- 
2.51.0

[PATCH 6.6 069/196] usb: misc: qcom_eud: Access EUD_MODE_MANAGER2 through secure calls

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Komal Bajaj <komal.bajaj@oss.qualcomm.com>

[ Upstream commit c0485e864a2eaa1d5a84c71e573dd236d0e885ae ]

EUD_MODE_MANAGER2 register is mapped to a memory region that is marked
as read-only for operating system running at EL1, enforcing access
restrictions that prohibit direct memory-mapped writes via writel().

Attempts to write to this region from HLOS can result in silent failures
or memory access violations, particularly when toggling EUD (Embedded
USB Debugger) state. To ensure secure register access, modify the driver
to use qcom_scm_io_writel(), which routes the write operation to Qualcomm
Secure Channel Monitor (SCM). SCM has the necessary permissions to access
protected memory regions, enabling reliable control over EUD state.

SC7280, the only user of EUD is also affected, indicating that this could
never have worked on a properly fused device.

Fixes: 9a1bf58ccd44 ("usb: misc: eud: Add driver support for Embedded USB Debugger(EUD)")
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
Signed-off-by: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250731-eud_mode_manager_secure_access-v8-1-4a5dcbb79f41@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/misc/Kconfig    |  1 +
 drivers/usb/misc/qcom_eud.c | 33 ++++++++++++++++++++++++---------
 2 files changed, 25 insertions(+), 9 deletions(-)

diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index 99b15b77dfd57..fe1b5fec1dfca 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -147,6 +147,7 @@ config USB_APPLEDISPLAY
 config USB_QCOM_EUD
 	tristate "QCOM Embedded USB Debugger(EUD) Driver"
 	depends on ARCH_QCOM || COMPILE_TEST
+	select QCOM_SCM
 	select USB_ROLE_SWITCH
 	help
 	  This module enables support for Qualcomm Technologies, Inc.
diff --git a/drivers/usb/misc/qcom_eud.c b/drivers/usb/misc/qcom_eud.c
index 7f371ea1248c3..cfb195a0f6ce2 100644
--- a/drivers/usb/misc/qcom_eud.c
+++ b/drivers/usb/misc/qcom_eud.c
@@ -15,6 +15,7 @@
 #include <linux/slab.h>
 #include <linux/sysfs.h>
 #include <linux/usb/role.h>
+#include <linux/firmware/qcom/qcom_scm.h>
 
 #define EUD_REG_INT1_EN_MASK	0x0024
 #define EUD_REG_INT_STATUS_1	0x0044
@@ -34,7 +35,7 @@ struct eud_chip {
 	struct device			*dev;
 	struct usb_role_switch		*role_sw;
 	void __iomem			*base;
-	void __iomem			*mode_mgr;
+	phys_addr_t			mode_mgr;
 	unsigned int			int_status;
 	int				irq;
 	bool				enabled;
@@ -43,18 +44,29 @@ struct eud_chip {
 
 static int enable_eud(struct eud_chip *priv)
 {
+	int ret;
+
+	ret = qcom_scm_io_writel(priv->mode_mgr + EUD_REG_EUD_EN2, 1);
+	if (ret)
+		return ret;
+
 	writel(EUD_ENABLE, priv->base + EUD_REG_CSR_EUD_EN);
 	writel(EUD_INT_VBUS | EUD_INT_SAFE_MODE,
 			priv->base + EUD_REG_INT1_EN_MASK);
-	writel(1, priv->mode_mgr + EUD_REG_EUD_EN2);
 
 	return usb_role_switch_set_role(priv->role_sw, USB_ROLE_DEVICE);
 }
 
-static void disable_eud(struct eud_chip *priv)
+static int disable_eud(struct eud_chip *priv)
 {
+	int ret;
+
+	ret = qcom_scm_io_writel(priv->mode_mgr + EUD_REG_EUD_EN2, 0);
+	if (ret)
+		return ret;
+
 	writel(0, priv->base + EUD_REG_CSR_EUD_EN);
-	writel(0, priv->mode_mgr + EUD_REG_EUD_EN2);
+	return 0;
 }
 
 static ssize_t enable_show(struct device *dev,
@@ -82,11 +94,12 @@ static ssize_t enable_store(struct device *dev,
 			chip->enabled = enable;
 		else
 			disable_eud(chip);
+
 	} else {
-		disable_eud(chip);
+		ret = disable_eud(chip);
 	}
 
-	return count;
+	return ret < 0 ? ret : count;
 }
 
 static DEVICE_ATTR_RW(enable);
@@ -178,6 +191,7 @@ static void eud_role_switch_release(void *data)
 static int eud_probe(struct platform_device *pdev)
 {
 	struct eud_chip *chip;
+	struct resource *res;
 	int ret;
 
 	chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
@@ -200,9 +214,10 @@ static int eud_probe(struct platform_device *pdev)
 	if (IS_ERR(chip->base))
 		return PTR_ERR(chip->base);
 
-	chip->mode_mgr = devm_platform_ioremap_resource(pdev, 1);
-	if (IS_ERR(chip->mode_mgr))
-		return PTR_ERR(chip->mode_mgr);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!res)
+		return -ENODEV;
+	chip->mode_mgr = res->start;
 
 	chip->irq = platform_get_irq(pdev, 0);
 	ret = devm_request_threaded_irq(&pdev->dev, chip->irq, handle_eud_irq,
-- 
2.51.0

[PATCH 6.6 070/196] serial: max310x: Add error checking in probe()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@linaro.org>

[ Upstream commit 672a37ba8af1f2ebcedeb94aea2cdd047f805f30 ]

Check if devm_i2c_new_dummy_device() fails.

Fixes: 2e1f2d9a9bdb ("serial: max310x: implement I2C support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/aJTMPZiKqeXSE-KM@stanley.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/max310x.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index e339abff926d3..e10dcdeeda2d3 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -1659,6 +1659,8 @@ static int max310x_i2c_probe(struct i2c_client *client)
 		port_client = devm_i2c_new_dummy_device(&client->dev,
 							client->adapter,
 							port_addr);
+		if (IS_ERR(port_client))
+			return PTR_ERR(port_client);
 
 		regmaps[i] = devm_regmap_init_i2c(port_client, &regcfg_i2c);
 	}
-- 
2.51.0

[PATCH 6.6 071/196] drm/amd/display: Remove redundant semicolons

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Liao Yuanhong <liaoyuanhong@vivo.com>

[ Upstream commit 90b810dd859c0df9db2290da1ac5842e5f031267 ]

Remove unnecessary semicolons.

Fixes: dda4fb85e433 ("drm/amd/display: DML changes for DCN32/321")
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../gpu/drm/amd/display/dc/dml/dcn32/display_rq_dlg_calc_32.c    | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_rq_dlg_calc_32.c b/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_rq_dlg_calc_32.c
index 9ba6cb67655f4..6c75aa82327ac 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_rq_dlg_calc_32.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_rq_dlg_calc_32.c
@@ -139,7 +139,6 @@ void dml32_rq_dlg_get_rq_reg(display_rq_regs_st *rq_regs,
 	if (dual_plane) {
 		unsigned int p1_pte_row_height_linear = get_dpte_row_height_linear_c(mode_lib, e2e_pipe_param,
 				num_pipes, pipe_idx);
-		;
 		if (src->sw_mode == dm_sw_linear)
 			ASSERT(p1_pte_row_height_linear >= 8);
 
-- 
2.51.0

[PATCH 6.6 072/196] crypto: keembay - Add missing check after sg_nents_for_len()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Fourier <fourier.thomas@gmail.com>

[ Upstream commit 4e53be21dd0315c00eaf40cc8f8c0facd4d9a6b2 ]

sg_nents_for_len() returns an int which is negative in case of error.

Fixes: 472b04444cd3 ("crypto: keembay - Add Keem Bay OCS HCU driver")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/intel/keembay/keembay-ocs-hcu-core.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/crypto/intel/keembay/keembay-ocs-hcu-core.c b/drivers/crypto/intel/keembay/keembay-ocs-hcu-core.c
index b732223035399..3b5d5b64e1414 100644
--- a/drivers/crypto/intel/keembay/keembay-ocs-hcu-core.c
+++ b/drivers/crypto/intel/keembay/keembay-ocs-hcu-core.c
@@ -232,7 +232,7 @@ static int kmb_ocs_dma_prepare(struct ahash_request *req)
 	struct device *dev = rctx->hcu_dev->dev;
 	unsigned int remainder = 0;
 	unsigned int total;
-	size_t nents;
+	int nents;
 	size_t count;
 	int rc;
 	int i;
@@ -253,6 +253,9 @@ static int kmb_ocs_dma_prepare(struct ahash_request *req)
 	/* Determine the number of scatter gather list entries to process. */
 	nents = sg_nents_for_len(req->src, rctx->sg_data_total - remainder);
 
+	if (nents < 0)
+		return nents;
+
 	/* If there are entries to process, map them. */
 	if (nents) {
 		rctx->sg_dma_nents = dma_map_sg(dev, req->src, nents,
-- 
2.51.0

[PATCH 6.6 073/196] hwrng: nomadik - add ARM_AMBA dependency

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit efaa2d815a0e4d1c06750e587100f6f7f4ee5497 ]

Compile-testing this driver is only possible when the AMBA bus driver is
available in the kernel:

x86_64-linux-ld: drivers/char/hw_random/nomadik-rng.o: in function `nmk_rng_remove':
nomadik-rng.c:(.text+0x67): undefined reference to `amba_release_regions'
x86_64-linux-ld: drivers/char/hw_random/nomadik-rng.o: in function `nmk_rng_probe':
nomadik-rng.c:(.text+0xee): undefined reference to `amba_request_regions'
x86_64-linux-ld: nomadik-rng.c:(.text+0x18d): undefined reference to `amba_release_regions'

The was previously implied by the 'depends on ARCH_NOMADIK', but needs to be
specified for the COMPILE_TEST case.

Fixes: d5e93b3374e4 ("hwrng: Kconfig - Add helper dependency on COMPILE_TEST")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/char/hw_random/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index 8de74dcfa18cf..ece2d794174d4 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -286,6 +286,7 @@ config HW_RANDOM_INGENIC_TRNG
 config HW_RANDOM_NOMADIK
 	tristate "ST-Ericsson Nomadik Random Number Generator support"
 	depends on ARCH_NOMADIK || COMPILE_TEST
+	depends on ARM_AMBA
 	default HW_RANDOM
 	help
 	  This driver provides kernel-side support for the Random Number
-- 
2.51.0

[PATCH 6.6 074/196] scsi: pm80xx: Fix array-index-out-of-of-bounds on rmmod

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Niklas Cassel <cassel@kernel.org>

[ Upstream commit 251be2f6037fb7ab399f68cd7428ff274133d693 ]

Since commit f7b705c238d1 ("scsi: pm80xx: Set phy_attached to zero when
device is gone") UBSAN reports:

  UBSAN: array-index-out-of-bounds in drivers/scsi/pm8001/pm8001_sas.c:786:17
  index 28 is out of range for type 'pm8001_phy [16]'

on rmmod when using an expander.

For a direct attached device, attached_phy contains the local phy id.
For a device behind an expander, attached_phy contains the remote phy
id, not the local phy id.

I.e. while pm8001_ha will have pm8001_ha->chip->n_phy local phys, for a
device behind an expander, attached_phy can be much larger than
pm8001_ha->chip->n_phy (depending on the amount of phys of the
expander).

E.g. on my system pm8001_ha has 8 phys with phy ids 0-7.  One of the
ports has an expander connected.  The expander has 31 phys with phy ids
0-30.

The pm8001_ha->phy array only contains the phys of the HBA.  It does not
contain the phys of the expander.  Thus, it is wrong to use attached_phy
to index the pm8001_ha->phy array for a device behind an expander.

Thus, we can only clear phy_attached for devices that are directly
attached.

Fixes: f7b705c238d1 ("scsi: pm80xx: Set phy_attached to zero when device is gone")
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20250814173215.1765055-14-cassel@kernel.org
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/pm8001/pm8001_sas.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
index a9d6dac413346..4daab8b6d6752 100644
--- a/drivers/scsi/pm8001/pm8001_sas.c
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -703,6 +703,7 @@ static void pm8001_dev_gone_notify(struct domain_device *dev)
 	unsigned long flags = 0;
 	struct pm8001_hba_info *pm8001_ha;
 	struct pm8001_device *pm8001_dev = dev->lldd_dev;
+	struct domain_device *parent_dev = dev->parent;
 
 	pm8001_ha = pm8001_find_ha_by_dev(dev);
 	spin_lock_irqsave(&pm8001_ha->lock, flags);
@@ -719,7 +720,13 @@ static void pm8001_dev_gone_notify(struct domain_device *dev)
 			spin_lock_irqsave(&pm8001_ha->lock, flags);
 		}
 		PM8001_CHIP_DISP->dereg_dev_req(pm8001_ha, device_id);
-		pm8001_ha->phy[pm8001_dev->attached_phy].phy_attached = 0;
+
+		/*
+		 * The phy array only contains local phys. Thus, we cannot clear
+		 * phy_attached for a device behind an expander.
+		 */
+		if (!(parent_dev && dev_is_expander(parent_dev->dev_type)))
+			pm8001_ha->phy[pm8001_dev->attached_phy].phy_attached = 0;
 		pm8001_free_dev(pm8001_dev);
 	} else {
 		pm8001_dbg(pm8001_ha, DISC, "Found dev has gone.\n");
-- 
2.51.0

[PATCH 6.6 075/196] scsi: myrs: Fix dma_alloc_coherent() error check

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Fourier <fourier.thomas@gmail.com>

[ Upstream commit edb35b1ffc686fd9b5a91902f034eb9f4d2c9f6b ]

Check for NULL return value with dma_alloc_coherent(), because DMA
address is not always set by dma_alloc_coherent() on failure.

Fixes: 77266186397c ("scsi: myrs: Add Mylex RAID controller (SCSI interface)")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://lore.kernel.org/r/20250725083112.43975-2-fourier.thomas@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/myrs.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/myrs.c b/drivers/scsi/myrs.c
index e824be9d9bbb9..9075836ccc3e2 100644
--- a/drivers/scsi/myrs.c
+++ b/drivers/scsi/myrs.c
@@ -498,14 +498,14 @@ static bool myrs_enable_mmio_mbox(struct myrs_hba *cs,
 	/* Temporary dma mapping, used only in the scope of this function */
 	mbox = dma_alloc_coherent(&pdev->dev, sizeof(union myrs_cmd_mbox),
 				  &mbox_addr, GFP_KERNEL);
-	if (dma_mapping_error(&pdev->dev, mbox_addr))
+	if (!mbox)
 		return false;
 
 	/* These are the base addresses for the command memory mailbox array */
 	cs->cmd_mbox_size = MYRS_MAX_CMD_MBOX * sizeof(union myrs_cmd_mbox);
 	cmd_mbox = dma_alloc_coherent(&pdev->dev, cs->cmd_mbox_size,
 				      &cs->cmd_mbox_addr, GFP_KERNEL);
-	if (dma_mapping_error(&pdev->dev, cs->cmd_mbox_addr)) {
+	if (!cmd_mbox) {
 		dev_err(&pdev->dev, "Failed to map command mailbox\n");
 		goto out_free;
 	}
@@ -520,7 +520,7 @@ static bool myrs_enable_mmio_mbox(struct myrs_hba *cs,
 	cs->stat_mbox_size = MYRS_MAX_STAT_MBOX * sizeof(struct myrs_stat_mbox);
 	stat_mbox = dma_alloc_coherent(&pdev->dev, cs->stat_mbox_size,
 				       &cs->stat_mbox_addr, GFP_KERNEL);
-	if (dma_mapping_error(&pdev->dev, cs->stat_mbox_addr)) {
+	if (!stat_mbox) {
 		dev_err(&pdev->dev, "Failed to map status mailbox\n");
 		goto out_free;
 	}
@@ -533,7 +533,7 @@ static bool myrs_enable_mmio_mbox(struct myrs_hba *cs,
 	cs->fwstat_buf = dma_alloc_coherent(&pdev->dev,
 					    sizeof(struct myrs_fwstat),
 					    &cs->fwstat_addr, GFP_KERNEL);
-	if (dma_mapping_error(&pdev->dev, cs->fwstat_addr)) {
+	if (!cs->fwstat_buf) {
 		dev_err(&pdev->dev, "Failed to map firmware health buffer\n");
 		cs->fwstat_buf = NULL;
 		goto out_free;
-- 
2.51.0

[PATCH 6.6 076/196] media: rj54n1cb0c: Fix memleak in rj54n1_probe()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Zhang Shurong <zhang_shurong@foxmail.com>

[ Upstream commit fda55673ecdabf25f5ecc61b5ab17239257ac252 ]

rj54n1_probe() won't clean all the allocated resources in fail
path, which may causes the memleaks. Add v4l2_ctrl_handler_free() to
prevent memleak.

Fixes: f187352dcd45 ("media: i2c: Copy rj54n1cb0c soc_camera sensor driver")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/rj54n1cb0c.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/media/i2c/rj54n1cb0c.c b/drivers/media/i2c/rj54n1cb0c.c
index b430046f9e2a9..09293e90025d5 100644
--- a/drivers/media/i2c/rj54n1cb0c.c
+++ b/drivers/media/i2c/rj54n1cb0c.c
@@ -1331,10 +1331,13 @@ static int rj54n1_probe(struct i2c_client *client)
 			V4L2_CID_GAIN, 0, 127, 1, 66);
 	v4l2_ctrl_new_std(&rj54n1->hdl, &rj54n1_ctrl_ops,
 			V4L2_CID_AUTO_WHITE_BALANCE, 0, 1, 1, 1);
-	rj54n1->subdev.ctrl_handler = &rj54n1->hdl;
-	if (rj54n1->hdl.error)
-		return rj54n1->hdl.error;
 
+	if (rj54n1->hdl.error) {
+		ret = rj54n1->hdl.error;
+		goto err_free_ctrl;
+	}
+
+	rj54n1->subdev.ctrl_handler = &rj54n1->hdl;
 	rj54n1->clk_div		= clk_div;
 	rj54n1->rect.left	= RJ54N1_COLUMN_SKIP;
 	rj54n1->rect.top	= RJ54N1_ROW_SKIP;
-- 
2.51.0

[PATCH 6.6 077/196] RDMA/mlx5: Fix vport loopback forcing for MPV device

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Patrisious Haddad <phaddad@nvidia.com>

[ Upstream commit 08aae7860450c89eebbc6fd4d38416e53c7a33d2 ]

Previously loopback for MPV was supposed to be permanently enabled,
however other driver flows were able to over-ride that configuration and
disable it.

Add force_lb parameter that indicates that loopback should always be
enabled which prevents all other driver flows from disabling it.

Fixes: a9a9e68954f2 ("RDMA/mlx5: Fix vport loopback for MPV device")
Link: https://patch.msgid.link/r/cfc6b1f0f99f8100b087483cc14da6025317f901.1755088808.git.leon@kernel.org
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/mlx5/main.c    | 19 +++++++++++++++----
 drivers/infiniband/hw/mlx5/mlx5_ib.h |  1 +
 2 files changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c
index e922fb8728654..0adb98b8dacc8 100644
--- a/drivers/infiniband/hw/mlx5/main.c
+++ b/drivers/infiniband/hw/mlx5/main.c
@@ -1691,7 +1691,8 @@ static void deallocate_uars(struct mlx5_ib_dev *dev,
 }
 
 static int mlx5_ib_enable_lb_mp(struct mlx5_core_dev *master,
-				struct mlx5_core_dev *slave)
+				struct mlx5_core_dev *slave,
+				struct mlx5_ib_lb_state *lb_state)
 {
 	int err;
 
@@ -1703,6 +1704,7 @@ static int mlx5_ib_enable_lb_mp(struct mlx5_core_dev *master,
 	if (err)
 		goto out;
 
+	lb_state->force_enable = true;
 	return 0;
 
 out:
@@ -1711,16 +1713,22 @@ static int mlx5_ib_enable_lb_mp(struct mlx5_core_dev *master,
 }
 
 static void mlx5_ib_disable_lb_mp(struct mlx5_core_dev *master,
-				  struct mlx5_core_dev *slave)
+				  struct mlx5_core_dev *slave,
+				  struct mlx5_ib_lb_state *lb_state)
 {
 	mlx5_nic_vport_update_local_lb(slave, false);
 	mlx5_nic_vport_update_local_lb(master, false);
+
+	lb_state->force_enable = false;
 }
 
 int mlx5_ib_enable_lb(struct mlx5_ib_dev *dev, bool td, bool qp)
 {
 	int err = 0;
 
+	if (dev->lb.force_enable)
+		return 0;
+
 	mutex_lock(&dev->lb.mutex);
 	if (td)
 		dev->lb.user_td++;
@@ -1742,6 +1750,9 @@ int mlx5_ib_enable_lb(struct mlx5_ib_dev *dev, bool td, bool qp)
 
 void mlx5_ib_disable_lb(struct mlx5_ib_dev *dev, bool td, bool qp)
 {
+	if (dev->lb.force_enable)
+		return;
+
 	mutex_lock(&dev->lb.mutex);
 	if (td)
 		dev->lb.user_td--;
@@ -3251,7 +3262,7 @@ static void mlx5_ib_unbind_slave_port(struct mlx5_ib_dev *ibdev,
 
 	lockdep_assert_held(&mlx5_ib_multiport_mutex);
 
-	mlx5_ib_disable_lb_mp(ibdev->mdev, mpi->mdev);
+	mlx5_ib_disable_lb_mp(ibdev->mdev, mpi->mdev, &ibdev->lb);
 
 	mlx5_core_mp_event_replay(ibdev->mdev,
 				  MLX5_DRIVER_EVENT_AFFILIATION_REMOVED,
@@ -3348,7 +3359,7 @@ static bool mlx5_ib_bind_slave_port(struct mlx5_ib_dev *ibdev,
 				  MLX5_DRIVER_EVENT_AFFILIATION_DONE,
 				  &key);
 
-	err = mlx5_ib_enable_lb_mp(ibdev->mdev, mpi->mdev);
+	err = mlx5_ib_enable_lb_mp(ibdev->mdev, mpi->mdev, &ibdev->lb);
 	if (err)
 		goto unbind;
 
diff --git a/drivers/infiniband/hw/mlx5/mlx5_ib.h b/drivers/infiniband/hw/mlx5/mlx5_ib.h
index 94678e5c59dd5..9b780f48a382b 100644
--- a/drivers/infiniband/hw/mlx5/mlx5_ib.h
+++ b/drivers/infiniband/hw/mlx5/mlx5_ib.h
@@ -1065,6 +1065,7 @@ struct mlx5_ib_lb_state {
 	u32			user_td;
 	int			qps;
 	bool			enabled;
+	bool			force_enable;
 };
 
 struct mlx5_ib_pf_eq {
-- 
2.51.0

[PATCH 6.6 078/196] ALSA: lx_core: use int type to store negative error codes

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Qianfeng Rong <rongqianfeng@vivo.com>

[ Upstream commit 4ef353d546cda466fc39b7daca558d7bcec21c09 ]

Change the 'ret' variable from u16 to int to store negative error codes or
zero returned by lx_message_send_atomic().

Storing the negative error codes in unsigned type, doesn't cause an issue
at runtime but it's ugly as pants. Additionally, assigning negative error
codes to unsigned type may trigger a GCC warning when the -Wsign-conversion
flag is enabled.

No effect on runtime.

Fixes: 02bec4904508 ("ALSA: lx6464es - driver for the digigram lx6464es interface")
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Link: https://patch.msgid.link/20250828081312.393148-1-rongqianfeng@vivo.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/lx6464es/lx_core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/pci/lx6464es/lx_core.c b/sound/pci/lx6464es/lx_core.c
index b5b0d43bb8dcd..c3f2717aebf25 100644
--- a/sound/pci/lx6464es/lx_core.c
+++ b/sound/pci/lx6464es/lx_core.c
@@ -316,7 +316,7 @@ static int lx_message_send_atomic(struct lx6464es *chip, struct lx_rmh *rmh)
 /* low-level dsp access */
 int lx_dsp_get_version(struct lx6464es *chip, u32 *rdsp_version)
 {
-	u16 ret;
+	int ret;
 
 	mutex_lock(&chip->msg_lock);
 
@@ -330,10 +330,10 @@ int lx_dsp_get_version(struct lx6464es *chip, u32 *rdsp_version)
 
 int lx_dsp_get_clock_frequency(struct lx6464es *chip, u32 *rfreq)
 {
-	u16 ret = 0;
 	u32 freq_raw = 0;
 	u32 freq = 0;
 	u32 frequency = 0;
+	int ret;
 
 	mutex_lock(&chip->msg_lock);
 
-- 
2.51.0

[PATCH 6.6 079/196] media: st-delta: avoid excessive stack usage

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 5954ad7d1af92cb6244c5f31216e43af55febbb7 ]

Building with a reduced stack warning limit shows that delta_mjpeg_decode()
copies a giant structure to the stack each time but only uses three of
its members:

drivers/media/platform/st/sti/delta/delta-mjpeg-dec.c: In function 'delta_mjpeg_decode':
drivers/media/platform/st/sti/delta/delta-mjpeg-dec.c:427:1: error: the frame size of 1296 bytes is larger than 1280 bytes [-Werror=frame-larger-than=]

Open-code the passing of the structure members that are actually used here.

Fixes: 433ff5b4a29b ("[media] st-delta: add mjpeg support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../platform/st/sti/delta/delta-mjpeg-dec.c   | 20 ++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

diff --git a/drivers/media/platform/st/sti/delta/delta-mjpeg-dec.c b/drivers/media/platform/st/sti/delta/delta-mjpeg-dec.c
index 0533d4a083d24..a078f1107300e 100644
--- a/drivers/media/platform/st/sti/delta/delta-mjpeg-dec.c
+++ b/drivers/media/platform/st/sti/delta/delta-mjpeg-dec.c
@@ -239,7 +239,7 @@ static int delta_mjpeg_ipc_open(struct delta_ctx *pctx)
 	return 0;
 }
 
-static int delta_mjpeg_ipc_decode(struct delta_ctx *pctx, struct delta_au *au)
+static int delta_mjpeg_ipc_decode(struct delta_ctx *pctx, dma_addr_t pstart, dma_addr_t pend)
 {
 	struct delta_dev *delta = pctx->dev;
 	struct delta_mjpeg_ctx *ctx = to_ctx(pctx);
@@ -256,8 +256,8 @@ static int delta_mjpeg_ipc_decode(struct delta_ctx *pctx, struct delta_au *au)
 
 	memset(params, 0, sizeof(*params));
 
-	params->picture_start_addr_p = (u32)(au->paddr);
-	params->picture_end_addr_p = (u32)(au->paddr + au->size - 1);
+	params->picture_start_addr_p = pstart;
+	params->picture_end_addr_p = pend;
 
 	/*
 	 * !WARNING!
@@ -374,12 +374,14 @@ static int delta_mjpeg_decode(struct delta_ctx *pctx, struct delta_au *pau)
 	struct delta_dev *delta = pctx->dev;
 	struct delta_mjpeg_ctx *ctx = to_ctx(pctx);
 	int ret;
-	struct delta_au au = *pau;
+	void *au_vaddr = pau->vaddr;
+	dma_addr_t au_dma = pau->paddr;
+	size_t au_size = pau->size;
 	unsigned int data_offset = 0;
 	struct mjpeg_header *header = &ctx->header_struct;
 
 	if (!ctx->header) {
-		ret = delta_mjpeg_read_header(pctx, au.vaddr, au.size,
+		ret = delta_mjpeg_read_header(pctx, au_vaddr, au_size,
 					      header, &data_offset);
 		if (ret) {
 			pctx->stream_errors++;
@@ -405,17 +407,17 @@ static int delta_mjpeg_decode(struct delta_ctx *pctx, struct delta_au *pau)
 			goto err;
 	}
 
-	ret = delta_mjpeg_read_header(pctx, au.vaddr, au.size,
+	ret = delta_mjpeg_read_header(pctx, au_vaddr, au_size,
 				      ctx->header, &data_offset);
 	if (ret) {
 		pctx->stream_errors++;
 		goto err;
 	}
 
-	au.paddr += data_offset;
-	au.vaddr += data_offset;
+	au_dma += data_offset;
+	au_vaddr += data_offset;
 
-	ret = delta_mjpeg_ipc_decode(pctx, &au);
+	ret = delta_mjpeg_ipc_decode(pctx, au_dma, au_dma + au_size - 1);
 	if (ret)
 		goto err;
 
-- 
2.51.0

[PATCH 6.6 080/196] crypto: hisilicon/zip - remove unnecessary validation for high-performance mode configurations

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chenghai Huang <huangchenghai2@huawei.com>

[ Upstream commit d4e081510471e79171c4e0a11f6cb608e49bc082 ]

When configuring the high-performance mode register, there is no
need to verify whether the register has been successfully
enabled, as there is no possibility of a write failure for this
register.

Fixes: a9864bae1806 ("crypto: hisilicon/zip - add zip comp high perf mode configuration")
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/hisilicon/zip/zip_main.c | 14 ++------------
 1 file changed, 2 insertions(+), 12 deletions(-)

diff --git a/drivers/crypto/hisilicon/zip/zip_main.c b/drivers/crypto/hisilicon/zip/zip_main.c
index 66e553115adfd..6e419c5165cb4 100644
--- a/drivers/crypto/hisilicon/zip/zip_main.c
+++ b/drivers/crypto/hisilicon/zip/zip_main.c
@@ -469,10 +469,9 @@ bool hisi_zip_alg_support(struct hisi_qm *qm, u32 alg)
 	return false;
 }
 
-static int hisi_zip_set_high_perf(struct hisi_qm *qm)
+static void hisi_zip_set_high_perf(struct hisi_qm *qm)
 {
 	u32 val;
-	int ret;
 
 	val = readl_relaxed(qm->io_base + HZIP_HIGH_PERF_OFFSET);
 	if (perf_mode == HZIP_HIGH_COMP_PERF)
@@ -482,13 +481,6 @@ static int hisi_zip_set_high_perf(struct hisi_qm *qm)
 
 	/* Set perf mode */
 	writel(val, qm->io_base + HZIP_HIGH_PERF_OFFSET);
-	ret = readl_relaxed_poll_timeout(qm->io_base + HZIP_HIGH_PERF_OFFSET,
-					 val, val == perf_mode, HZIP_DELAY_1_US,
-					 HZIP_POLL_TIMEOUT_US);
-	if (ret)
-		pci_err(qm->pdev, "failed to set perf mode\n");
-
-	return ret;
 }
 
 static void hisi_zip_open_sva_prefetch(struct hisi_qm *qm)
@@ -1180,9 +1172,7 @@ static int hisi_zip_pf_probe_init(struct hisi_zip *hisi_zip)
 	if (ret)
 		return ret;
 
-	ret = hisi_zip_set_high_perf(qm);
-	if (ret)
-		return ret;
+	hisi_zip_set_high_perf(qm);
 
 	hisi_zip_open_sva_prefetch(qm);
 	hisi_qm_dev_err_init(qm);
-- 
2.51.0

[PATCH 6.6 081/196] crypto: hisilicon - re-enable address prefetch after device resuming

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chenghai Huang <huangchenghai2@huawei.com>

[ Upstream commit 0dcd21443d9308ed88909d35aa0490c3fc680a47 ]

When the device resumes from a suspended state, it will revert to its
initial state and requires re-enabling. Currently, the address prefetch
function is not re-enabled after device resuming. Move the address prefetch
enable to the initialization process. In this way, the address prefetch
can be enabled when the device resumes by calling the initialization
process.

Fixes: 607c191b371d ("crypto: hisilicon - support runtime PM for accelerator device")
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/hisilicon/hpre/hpre_main.c |  3 +-
 drivers/crypto/hisilicon/qm.c             |  3 -
 drivers/crypto/hisilicon/sec2/sec_main.c  | 80 +++++++++++------------
 drivers/crypto/hisilicon/zip/zip_main.c   |  5 +-
 4 files changed, 43 insertions(+), 48 deletions(-)

diff --git a/drivers/crypto/hisilicon/hpre/hpre_main.c b/drivers/crypto/hisilicon/hpre/hpre_main.c
index 762a2a54ca821..e3d113334d4e4 100644
--- a/drivers/crypto/hisilicon/hpre/hpre_main.c
+++ b/drivers/crypto/hisilicon/hpre/hpre_main.c
@@ -689,6 +689,7 @@ static int hpre_set_user_domain_and_cache(struct hisi_qm *qm)
 
 	/* Config data buffer pasid needed by Kunpeng 920 */
 	hpre_config_pasid(qm);
+	hpre_open_sva_prefetch(qm);
 
 	hpre_enable_clock_gate(qm);
 
@@ -1366,8 +1367,6 @@ static int hpre_pf_probe_init(struct hpre *hpre)
 	if (ret)
 		return ret;
 
-	hpre_open_sva_prefetch(qm);
-
 	hisi_qm_dev_err_init(qm);
 	ret = hpre_show_last_regs_init(qm);
 	if (ret)
diff --git a/drivers/crypto/hisilicon/qm.c b/drivers/crypto/hisilicon/qm.c
index 7921409791fb0..183885619eb8b 100644
--- a/drivers/crypto/hisilicon/qm.c
+++ b/drivers/crypto/hisilicon/qm.c
@@ -4363,9 +4363,6 @@ static void qm_restart_prepare(struct hisi_qm *qm)
 {
 	u32 value;
 
-	if (qm->err_ini->open_sva_prefetch)
-		qm->err_ini->open_sva_prefetch(qm);
-
 	if (qm->ver >= QM_HW_V3)
 		return;
 
diff --git a/drivers/crypto/hisilicon/sec2/sec_main.c b/drivers/crypto/hisilicon/sec2/sec_main.c
index 6aaaaf784ddc0..064fbc8db16fc 100644
--- a/drivers/crypto/hisilicon/sec2/sec_main.c
+++ b/drivers/crypto/hisilicon/sec2/sec_main.c
@@ -436,6 +436,45 @@ static void sec_set_endian(struct hisi_qm *qm)
 	writel_relaxed(reg, qm->io_base + SEC_CONTROL_REG);
 }
 
+static void sec_close_sva_prefetch(struct hisi_qm *qm)
+{
+	u32 val;
+	int ret;
+
+	if (!test_bit(QM_SUPPORT_SVA_PREFETCH, &qm->caps))
+		return;
+
+	val = readl_relaxed(qm->io_base + SEC_PREFETCH_CFG);
+	val |= SEC_PREFETCH_DISABLE;
+	writel(val, qm->io_base + SEC_PREFETCH_CFG);
+
+	ret = readl_relaxed_poll_timeout(qm->io_base + SEC_SVA_TRANS,
+					 val, !(val & SEC_SVA_DISABLE_READY),
+					 SEC_DELAY_10_US, SEC_POLL_TIMEOUT_US);
+	if (ret)
+		pci_err(qm->pdev, "failed to close sva prefetch\n");
+}
+
+static void sec_open_sva_prefetch(struct hisi_qm *qm)
+{
+	u32 val;
+	int ret;
+
+	if (!test_bit(QM_SUPPORT_SVA_PREFETCH, &qm->caps))
+		return;
+
+	/* Enable prefetch */
+	val = readl_relaxed(qm->io_base + SEC_PREFETCH_CFG);
+	val &= SEC_PREFETCH_ENABLE;
+	writel(val, qm->io_base + SEC_PREFETCH_CFG);
+
+	ret = readl_relaxed_poll_timeout(qm->io_base + SEC_PREFETCH_CFG,
+					 val, !(val & SEC_PREFETCH_DISABLE),
+					 SEC_DELAY_10_US, SEC_POLL_TIMEOUT_US);
+	if (ret)
+		pci_err(qm->pdev, "failed to open sva prefetch\n");
+}
+
 static void sec_engine_sva_config(struct hisi_qm *qm)
 {
 	u32 reg;
@@ -469,45 +508,7 @@ static void sec_engine_sva_config(struct hisi_qm *qm)
 		writel_relaxed(reg, qm->io_base +
 				SEC_INTERFACE_USER_CTRL1_REG);
 	}
-}
-
-static void sec_open_sva_prefetch(struct hisi_qm *qm)
-{
-	u32 val;
-	int ret;
-
-	if (!test_bit(QM_SUPPORT_SVA_PREFETCH, &qm->caps))
-		return;
-
-	/* Enable prefetch */
-	val = readl_relaxed(qm->io_base + SEC_PREFETCH_CFG);
-	val &= SEC_PREFETCH_ENABLE;
-	writel(val, qm->io_base + SEC_PREFETCH_CFG);
-
-	ret = readl_relaxed_poll_timeout(qm->io_base + SEC_PREFETCH_CFG,
-					 val, !(val & SEC_PREFETCH_DISABLE),
-					 SEC_DELAY_10_US, SEC_POLL_TIMEOUT_US);
-	if (ret)
-		pci_err(qm->pdev, "failed to open sva prefetch\n");
-}
-
-static void sec_close_sva_prefetch(struct hisi_qm *qm)
-{
-	u32 val;
-	int ret;
-
-	if (!test_bit(QM_SUPPORT_SVA_PREFETCH, &qm->caps))
-		return;
-
-	val = readl_relaxed(qm->io_base + SEC_PREFETCH_CFG);
-	val |= SEC_PREFETCH_DISABLE;
-	writel(val, qm->io_base + SEC_PREFETCH_CFG);
-
-	ret = readl_relaxed_poll_timeout(qm->io_base + SEC_SVA_TRANS,
-					 val, !(val & SEC_SVA_DISABLE_READY),
-					 SEC_DELAY_10_US, SEC_POLL_TIMEOUT_US);
-	if (ret)
-		pci_err(qm->pdev, "failed to close sva prefetch\n");
+	sec_open_sva_prefetch(qm);
 }
 
 static void sec_enable_clock_gate(struct hisi_qm *qm)
@@ -1090,7 +1091,6 @@ static int sec_pf_probe_init(struct sec_dev *sec)
 	if (ret)
 		return ret;
 
-	sec_open_sva_prefetch(qm);
 	hisi_qm_dev_err_init(qm);
 	sec_debug_regs_clear(qm);
 	ret = sec_show_last_regs_init(qm);
diff --git a/drivers/crypto/hisilicon/zip/zip_main.c b/drivers/crypto/hisilicon/zip/zip_main.c
index 6e419c5165cb4..b70aa6032874e 100644
--- a/drivers/crypto/hisilicon/zip/zip_main.c
+++ b/drivers/crypto/hisilicon/zip/zip_main.c
@@ -577,6 +577,7 @@ static int hisi_zip_set_user_domain_and_cache(struct hisi_qm *qm)
 		writel(AXUSER_BASE, base + HZIP_DATA_WUSER_32_63);
 		writel(AXUSER_BASE, base + HZIP_SGL_RUSER_32_63);
 	}
+	hisi_zip_open_sva_prefetch(qm);
 
 	/* let's open all compression/decompression cores */
 	dcomp_bm = qm->cap_tables.dev_cap_table[ZIP_DECOMP_ENABLE_BITMAP_IDX].cap_val;
@@ -588,6 +589,7 @@ static int hisi_zip_set_user_domain_and_cache(struct hisi_qm *qm)
 	       CQC_CACHE_WB_ENABLE | FIELD_PREP(SQC_CACHE_WB_THRD, 1) |
 	       FIELD_PREP(CQC_CACHE_WB_THRD, 1), base + QM_CACHE_CTL);
 
+	hisi_zip_set_high_perf(qm);
 	hisi_zip_enable_clock_gate(qm);
 
 	return 0;
@@ -1172,9 +1174,6 @@ static int hisi_zip_pf_probe_init(struct hisi_zip *hisi_zip)
 	if (ret)
 		return ret;
 
-	hisi_zip_set_high_perf(qm);
-
-	hisi_zip_open_sva_prefetch(qm);
 	hisi_qm_dev_err_init(qm);
 	hisi_zip_debug_regs_clear(qm);
 
-- 
2.51.0

[PATCH 6.6 082/196] crypto: hisilicon/qm - check whether the input function and PF are on the same device

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Zhushuai Yin <yinzhushuai@huawei.com>

[ Upstream commit 6a2c9164b52e6bc134127fd543461fdef95cc8ec ]

Function rate limiting is set through physical function driver.
Users configure by providing function information and rate limit values.
Before configuration, it is necessary to check whether the
provided function and PF belong to the same device.

Fixes: 22d7a6c39cab ("crypto: hisilicon/qm - add pci bdf number check")
Signed-off-by: Zhushuai Yin <yinzhushuai@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/hisilicon/qm.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/crypto/hisilicon/qm.c b/drivers/crypto/hisilicon/qm.c
index 183885619eb8b..203240e78f6ad 100644
--- a/drivers/crypto/hisilicon/qm.c
+++ b/drivers/crypto/hisilicon/qm.c
@@ -3748,6 +3748,10 @@ static ssize_t qm_get_qos_value(struct hisi_qm *qm, const char *buf,
 	}
 
 	pdev = container_of(dev, struct pci_dev, dev);
+	if (pci_physfn(pdev) != qm->pdev) {
+		pci_err(qm->pdev, "the pdev input does not match the pf!\n");
+		return -EINVAL;
+	}
 
 	*fun_index = pdev->devfn;
 
-- 
2.51.0

[PATCH 6.6 083/196] inet: ping: check sock_net() in ping_get_port() and ping_lookup()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 59f26d86b2a16f1406f3b42025062b6d1fba5dd5 ]

We need to check socket netns before considering them in ping_get_port().
Otherwise, one malicious netns could 'consume' all ports.

Add corresponding check in ping_lookup().

Fixes: c319b4d76b9e ("net: ipv4: add IPPROTO_ICMP socket kind")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://patch.msgid.link/20250829153054.474201-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/ping.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/net/ipv4/ping.c b/net/ipv4/ping.c
index 4cb0c896caf97..5c848136bc266 100644
--- a/net/ipv4/ping.c
+++ b/net/ipv4/ping.c
@@ -77,6 +77,7 @@ static inline struct hlist_head *ping_hashslot(struct ping_table *table,
 
 int ping_get_port(struct sock *sk, unsigned short ident)
 {
+	struct net *net = sock_net(sk);
 	struct inet_sock *isk, *isk2;
 	struct hlist_head *hlist;
 	struct sock *sk2 = NULL;
@@ -90,9 +91,10 @@ int ping_get_port(struct sock *sk, unsigned short ident)
 		for (i = 0; i < (1L << 16); i++, result++) {
 			if (!result)
 				result++; /* avoid zero */
-			hlist = ping_hashslot(&ping_table, sock_net(sk),
-					    result);
+			hlist = ping_hashslot(&ping_table, net, result);
 			sk_for_each(sk2, hlist) {
+				if (!net_eq(sock_net(sk2), net))
+					continue;
 				isk2 = inet_sk(sk2);
 
 				if (isk2->inet_num == result)
@@ -108,8 +110,10 @@ int ping_get_port(struct sock *sk, unsigned short ident)
 		if (i >= (1L << 16))
 			goto fail;
 	} else {
-		hlist = ping_hashslot(&ping_table, sock_net(sk), ident);
+		hlist = ping_hashslot(&ping_table, net, ident);
 		sk_for_each(sk2, hlist) {
+			if (!net_eq(sock_net(sk2), net))
+				continue;
 			isk2 = inet_sk(sk2);
 
 			/* BUG? Why is this reuse and not reuseaddr? ping.c
@@ -129,7 +133,7 @@ int ping_get_port(struct sock *sk, unsigned short ident)
 		pr_debug("was not hashed\n");
 		sk_add_node_rcu(sk, hlist);
 		sock_set_flag(sk, SOCK_RCU_FREE);
-		sock_prot_inuse_add(sock_net(sk), sk->sk_prot, 1);
+		sock_prot_inuse_add(net, sk->sk_prot, 1);
 	}
 	spin_unlock(&ping_table.lock);
 	return 0;
@@ -188,6 +192,8 @@ static struct sock *ping_lookup(struct net *net, struct sk_buff *skb, u16 ident)
 	}
 
 	sk_for_each_rcu(sk, hslot) {
+		if (!net_eq(sock_net(sk), net))
+			continue;
 		isk = inet_sk(sk);
 
 		pr_debug("iterate\n");
-- 
2.51.0

[PATCH 6.6 084/196] coresight: Only register perf symlink for sinks with alloc_buffer

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yuanfang Zhang <quic_yuanfang@quicinc.com>

[ Upstream commit 12d9a9dd9d8a4f1968073e7f34515896d1e22b78 ]

Ensure that etm_perf_add_symlink_sink() is only called for devices
that implement the alloc_buffer operation. This prevents invalid
symlink creation for dummy sinks that do not implement alloc_buffer.

Without this check, perf may attempt to use a dummy sink that lacks
alloc_buffer operationsu to initialise perf's ring buffer, leading
to runtime failures.

Fixes: 9d3ba0b6c0569 ("Coresight: Add coresight dummy driver")
Signed-off-by: Yuanfang Zhang <quic_yuanfang@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250630-etm_perf_sink-v1-1-e4a7211f9ad7@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwtracing/coresight/coresight-core.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/hwtracing/coresight/coresight-core.c b/drivers/hwtracing/coresight/coresight-core.c
index 3b57851869eaa..a836952737209 100644
--- a/drivers/hwtracing/coresight/coresight-core.c
+++ b/drivers/hwtracing/coresight/coresight-core.c
@@ -1638,8 +1638,9 @@ struct coresight_device *coresight_register(struct coresight_desc *desc)
 		goto out_unlock;
 	}
 
-	if (csdev->type == CORESIGHT_DEV_TYPE_SINK ||
-	    csdev->type == CORESIGHT_DEV_TYPE_LINKSINK) {
+	if ((csdev->type == CORESIGHT_DEV_TYPE_SINK ||
+	     csdev->type == CORESIGHT_DEV_TYPE_LINKSINK) &&
+	    sink_ops(csdev)->alloc_buffer) {
 		ret = etm_perf_add_symlink_sink(csdev);
 
 		if (ret) {
-- 
2.51.0

[PATCH 6.6 085/196] drm/amdgpu: Power up UVD 3 for FW validation (v2)

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Timur Kristóf <timur.kristof@gmail.com>

[ Upstream commit c661219cd7be75bb5599b525f16a455a058eb516 ]

Unlike later versions, UVD 3 has firmware validation.
For this to work, the UVD should be powered up correctly.

When DPM is enabled and the display clock is off,
the SMU may choose a power state which doesn't power
the UVD, which can result in failure to initialize UVD.

v2:
Add code comments to explain about the UVD power state
and how UVD clock is turned on/off.

Fixes: b38f3e80ecec ("drm amdgpu: SI UVD v3_1 (v2)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c | 29 +++++++++++++++++++++++----
 1 file changed, 25 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c b/drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c
index 5534c769b6550..1e0189f90fd6a 100644
--- a/drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c
+++ b/drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c
@@ -625,7 +625,22 @@ static void uvd_v3_1_enable_mgcg(struct amdgpu_device *adev,
  *
  * @handle: handle used to pass amdgpu_device pointer
  *
- * Initialize the hardware, boot up the VCPU and do some testing
+ * Initialize the hardware, boot up the VCPU and do some testing.
+ *
+ * On SI, the UVD is meant to be used in a specific power state,
+ * or alternatively the driver can manually enable its clock.
+ * In amdgpu we use the dedicated UVD power state when DPM is enabled.
+ * Calling amdgpu_dpm_enable_uvd makes DPM select the UVD power state
+ * for the SMU and afterwards enables the UVD clock.
+ * This is automatically done by amdgpu_uvd_ring_begin_use when work
+ * is submitted to the UVD ring. Here, we have to call it manually
+ * in order to power up UVD before firmware validation.
+ *
+ * Note that we must not disable the UVD clock here, as that would
+ * cause the ring test to fail. However, UVD is powered off
+ * automatically after the ring test: amdgpu_uvd_ring_end_use calls
+ * the UVD idle work handler which will disable the UVD clock when
+ * all fences are signalled.
  */
 static int uvd_v3_1_hw_init(void *handle)
 {
@@ -635,6 +650,15 @@ static int uvd_v3_1_hw_init(void *handle)
 	int r;
 
 	uvd_v3_1_mc_resume(adev);
+	uvd_v3_1_enable_mgcg(adev, true);
+
+	/* Make sure UVD is powered during FW validation.
+	 * It's going to be automatically powered off after the ring test.
+	 */
+	if (adev->pm.dpm_enabled)
+		amdgpu_dpm_enable_uvd(adev, true);
+	else
+		amdgpu_asic_set_uvd_clocks(adev, 53300, 40000);
 
 	r = uvd_v3_1_fw_validate(adev);
 	if (r) {
@@ -642,9 +666,6 @@ static int uvd_v3_1_hw_init(void *handle)
 		return r;
 	}
 
-	uvd_v3_1_enable_mgcg(adev, true);
-	amdgpu_asic_set_uvd_clocks(adev, 53300, 40000);
-
 	uvd_v3_1_start(adev);
 
 	r = amdgpu_ring_test_helper(ring);
-- 
2.51.0

[PATCH 6.6 086/196] drm/amd/pm: Disable ULV even if unsupported (v3)

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Timur Kristóf <timur.kristof@gmail.com>

[ Upstream commit 3a0c3a4035f995e1f993dfaf4d63dc19e9b4bc1c ]

Always send PPSMC_MSG_DisableULV to the SMC, even if ULV mode
is unsupported, to make sure it is properly turned off.

v3:
Simplify si_disable_ulv further.
Always check the return value of amdgpu_si_send_msg_to_smc.

Fixes: 841686df9f7d ("drm/amdgpu: add SI DPM support (v4)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/pm/legacy-dpm/si_dpm.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/amd/pm/legacy-dpm/si_dpm.c b/drivers/gpu/drm/amd/pm/legacy-dpm/si_dpm.c
index e7b1fa2feb928..8be367c49367d 100644
--- a/drivers/gpu/drm/amd/pm/legacy-dpm/si_dpm.c
+++ b/drivers/gpu/drm/amd/pm/legacy-dpm/si_dpm.c
@@ -5617,14 +5617,10 @@ static int si_populate_smc_t(struct amdgpu_device *adev,
 
 static int si_disable_ulv(struct amdgpu_device *adev)
 {
-	struct si_power_info *si_pi = si_get_pi(adev);
-	struct si_ulv_param *ulv = &si_pi->ulv;
+	PPSMC_Result r;
 
-	if (ulv->supported)
-		return (amdgpu_si_send_msg_to_smc(adev, PPSMC_MSG_DisableULV) == PPSMC_Result_OK) ?
-			0 : -EINVAL;
-
-	return 0;
+	r = amdgpu_si_send_msg_to_smc(adev, PPSMC_MSG_DisableULV);
+	return (r == PPSMC_Result_OK) ? 0 : -EINVAL;
 }
 
 static bool si_is_state_ulv_compatible(struct amdgpu_device *adev,
-- 
2.51.0

[PATCH 6.6 087/196] drm/amd/pm: Fix si_upload_smc_data (v3)

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Timur Kristóf <timur.kristof@gmail.com>

[ Upstream commit a43b2cec04b02743338aa78f837ee0bdf066a6d5 ]

The si_upload_smc_data function uses si_write_smc_soft_register
to set some register values in the SMC, and expects the result
to be PPSMC_Result_OK which is 1.

The PPSMC_Result_OK / PPSMC_Result_Failed values are used for
checking the result of a command sent to the SMC.
However, the si_write_smc_soft_register actually doesn't send
any commands to the SMC and returns zero on success,
so this check was incorrect.

Fix that by not checking the return value, just like other
calls to si_write_smc_soft_register.

v3:
Additionally, when no display is plugged in, there is no need
to restrict MCLK switching, so program the registers to zero.

Fixes: 841686df9f7d ("drm/amdgpu: add SI DPM support (v4)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/pm/legacy-dpm/si_dpm.c | 43 ++++++++++++----------
 1 file changed, 24 insertions(+), 19 deletions(-)

diff --git a/drivers/gpu/drm/amd/pm/legacy-dpm/si_dpm.c b/drivers/gpu/drm/amd/pm/legacy-dpm/si_dpm.c
index 8be367c49367d..cff55daa68ab8 100644
--- a/drivers/gpu/drm/amd/pm/legacy-dpm/si_dpm.c
+++ b/drivers/gpu/drm/amd/pm/legacy-dpm/si_dpm.c
@@ -5793,9 +5793,9 @@ static int si_upload_smc_data(struct amdgpu_device *adev)
 {
 	struct amdgpu_crtc *amdgpu_crtc = NULL;
 	int i;
-
-	if (adev->pm.dpm.new_active_crtc_count == 0)
-		return 0;
+	u32 crtc_index = 0;
+	u32 mclk_change_block_cp_min = 0;
+	u32 mclk_change_block_cp_max = 0;
 
 	for (i = 0; i < adev->mode_info.num_crtc; i++) {
 		if (adev->pm.dpm.new_active_crtcs & (1 << i)) {
@@ -5804,26 +5804,31 @@ static int si_upload_smc_data(struct amdgpu_device *adev)
 		}
 	}
 
-	if (amdgpu_crtc == NULL)
-		return 0;
+	/* When a display is plugged in, program these so that the SMC
+	 * performs MCLK switching when it doesn't cause flickering.
+	 * When no display is plugged in, there is no need to restrict
+	 * MCLK switching, so program them to zero.
+	 */
+	if (adev->pm.dpm.new_active_crtc_count && amdgpu_crtc) {
+		crtc_index = amdgpu_crtc->crtc_id;
 
-	if (amdgpu_crtc->line_time <= 0)
-		return 0;
+		if (amdgpu_crtc->line_time) {
+			mclk_change_block_cp_min = amdgpu_crtc->wm_high / amdgpu_crtc->line_time;
+			mclk_change_block_cp_max = amdgpu_crtc->wm_low / amdgpu_crtc->line_time;
+		}
+	}
 
-	if (si_write_smc_soft_register(adev,
-				       SI_SMC_SOFT_REGISTER_crtc_index,
-				       amdgpu_crtc->crtc_id) != PPSMC_Result_OK)
-		return 0;
+	si_write_smc_soft_register(adev,
+		SI_SMC_SOFT_REGISTER_crtc_index,
+		crtc_index);
 
-	if (si_write_smc_soft_register(adev,
-				       SI_SMC_SOFT_REGISTER_mclk_change_block_cp_min,
-				       amdgpu_crtc->wm_high / amdgpu_crtc->line_time) != PPSMC_Result_OK)
-		return 0;
+	si_write_smc_soft_register(adev,
+		SI_SMC_SOFT_REGISTER_mclk_change_block_cp_min,
+		mclk_change_block_cp_min);
 
-	if (si_write_smc_soft_register(adev,
-				       SI_SMC_SOFT_REGISTER_mclk_change_block_cp_max,
-				       amdgpu_crtc->wm_low / amdgpu_crtc->line_time) != PPSMC_Result_OK)
-		return 0;
+	si_write_smc_soft_register(adev,
+		SI_SMC_SOFT_REGISTER_mclk_change_block_cp_max,
+		mclk_change_block_cp_max);
 
 	return 0;
 }
-- 
2.51.0

[PATCH 6.6 088/196] drm/amd/pm: Adjust si_upload_smc_data register programming (v3)

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Timur Kristóf <timur.kristof@gmail.com>

[ Upstream commit ce025130127437dc884c84c254170e27b2ce9309 ]

Based on some comments in dm_pp_display_configuration
above the crtc_index and line_time fields, these values
are programmed to the SMC to work around an SMC hang
when it switches MCLK.

According to Alex, the Windows driver programs them to:
mclk_change_block_cp_min = 200 / line_time
mclk_change_block_cp_max = 100 / line_time
Let's use the same for the sake of consistency.

Previously we used the watermark values, but it seemed buggy
as the code was mixing up low/high and A/B watermarks, and
was not saving a low watermark value on DCE 6, so
mclk_change_block_cp_max would be always zero previously.

Split this change off from the previous si_upload_smc_data
to make it easier to bisect, in case it causes any issues.

Fixes: 841686df9f7d ("drm/amdgpu: add SI DPM support (v4)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/pm/legacy-dpm/si_dpm.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/pm/legacy-dpm/si_dpm.c b/drivers/gpu/drm/amd/pm/legacy-dpm/si_dpm.c
index cff55daa68ab8..3ce9396900f7f 100644
--- a/drivers/gpu/drm/amd/pm/legacy-dpm/si_dpm.c
+++ b/drivers/gpu/drm/amd/pm/legacy-dpm/si_dpm.c
@@ -5813,8 +5813,8 @@ static int si_upload_smc_data(struct amdgpu_device *adev)
 		crtc_index = amdgpu_crtc->crtc_id;
 
 		if (amdgpu_crtc->line_time) {
-			mclk_change_block_cp_min = amdgpu_crtc->wm_high / amdgpu_crtc->line_time;
-			mclk_change_block_cp_max = amdgpu_crtc->wm_low / amdgpu_crtc->line_time;
+			mclk_change_block_cp_min = 200 / amdgpu_crtc->line_time;
+			mclk_change_block_cp_max = 100 / amdgpu_crtc->line_time;
 		}
 	}
 
-- 
2.51.0

[PATCH 6.6 089/196] drm/amd/pm: Treat zero vblank time as too short in si_dpm (v3)

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Timur Kristóf <timur.kristof@gmail.com>

[ Upstream commit 9003a0746864f39a0ef72bd45f8e1ad85d930d67 ]

Some parts of the code base expect that MCLK switching is turned
off when the vblank time is set to zero.

According to pp_pm_compute_clocks the non-DC code has issues
with MCLK switching with refresh rates over 120 Hz.

v3:
Add code comment to explain this better.
Add an if statement instead of changing the switch_limit.

Fixes: 841686df9f7d ("drm/amdgpu: add SI DPM support (v4)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/pm/legacy-dpm/si_dpm.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/pm/legacy-dpm/si_dpm.c b/drivers/gpu/drm/amd/pm/legacy-dpm/si_dpm.c
index 3ce9396900f7f..075d183bb1bb9 100644
--- a/drivers/gpu/drm/amd/pm/legacy-dpm/si_dpm.c
+++ b/drivers/gpu/drm/amd/pm/legacy-dpm/si_dpm.c
@@ -3066,7 +3066,13 @@ static bool si_dpm_vblank_too_short(void *handle)
 	/* we never hit the non-gddr5 limit so disable it */
 	u32 switch_limit = adev->gmc.vram_type == AMDGPU_VRAM_TYPE_GDDR5 ? 450 : 0;
 
-	if (vblank_time < switch_limit)
+	/* Consider zero vblank time too short and disable MCLK switching.
+	 * Note that the vblank time is set to maximum when no displays are attached,
+	 * so we'll still enable MCLK switching in that case.
+	 */
+	if (vblank_time == 0)
+		return true;
+	else if (vblank_time < switch_limit)
 		return true;
 	else
 		return false;
-- 
2.51.0

[PATCH 6.6 090/196] drm/amd/pm: Disable MCLK switching with non-DC at 120 Hz+ (v2)

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Timur Kristóf <timur.kristof@gmail.com>

[ Upstream commit ed3803533c7bf7df88bc3fc9f70bd317e1228ea8 ]

According to pp_pm_compute_clocks the non-DC display code
has "issues with mclk switching with refresh rates over 120 hz".
The workaround is to disable MCLK switching in this case.

Do the same for legacy DPM.

Fixes: 6ddbd37f1074 ("drm/amd/pm: optimize the amdgpu_pm_compute_clocks() implementations")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/pm/amdgpu_dpm_internal.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/gpu/drm/amd/pm/amdgpu_dpm_internal.c b/drivers/gpu/drm/amd/pm/amdgpu_dpm_internal.c
index 42efe838fa85c..2d2d2d5e67634 100644
--- a/drivers/gpu/drm/amd/pm/amdgpu_dpm_internal.c
+++ b/drivers/gpu/drm/amd/pm/amdgpu_dpm_internal.c
@@ -66,6 +66,13 @@ u32 amdgpu_dpm_get_vblank_time(struct amdgpu_device *adev)
 					(amdgpu_crtc->v_border * 2));
 
 				vblank_time_us = vblank_in_pixels * 1000 / amdgpu_crtc->hw_mode.clock;
+
+				/* we have issues with mclk switching with
+				 * refresh rates over 120 hz on the non-DC code.
+				 */
+				if (drm_mode_vrefresh(&amdgpu_crtc->hw_mode) > 120)
+					vblank_time_us = 0;
+
 				break;
 			}
 		}
-- 
2.51.0

[PATCH 6.6 091/196] drm/amd/pm: Disable SCLK switching on Oland with high pixel clocks (v3)

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Timur Kristóf <timur.kristof@gmail.com>

[ Upstream commit 7009e3af0474aca5f64262b3c72fb6e23b232f9b ]

Port of commit 227545b9a08c ("drm/radeon/dpm: Disable sclk
switching on Oland when two 4K 60Hz monitors are connected")

This is an ad-hoc DPM fix, necessary because we don't have
proper bandwidth calculation for DCE 6.

We define "high pixelclock" for SI as higher than necessary
for 4K 30Hz. For example, 4K 60Hz and 1080p 144Hz fall into
this category.

When two high pixel clock displays are connected to Oland,
additionally disable shader clock switching, which results in
a higher voltage, thereby addressing some visible flickering.

v2:
Add more comments.
v3:
Split into two commits for easier review.

Fixes: 841686df9f7d ("drm/amdgpu: add SI DPM support (v4)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/pm/legacy-dpm/si_dpm.c | 31 ++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/drivers/gpu/drm/amd/pm/legacy-dpm/si_dpm.c b/drivers/gpu/drm/amd/pm/legacy-dpm/si_dpm.c
index 075d183bb1bb9..2863dc65ffc6f 100644
--- a/drivers/gpu/drm/amd/pm/legacy-dpm/si_dpm.c
+++ b/drivers/gpu/drm/amd/pm/legacy-dpm/si_dpm.c
@@ -3430,12 +3430,14 @@ static void si_apply_state_adjust_rules(struct amdgpu_device *adev,
 {
 	struct  si_ps *ps = si_get_ps(rps);
 	struct amdgpu_clock_and_voltage_limits *max_limits;
+	struct amdgpu_connector *conn;
 	bool disable_mclk_switching = false;
 	bool disable_sclk_switching = false;
 	u32 mclk, sclk;
 	u16 vddc, vddci, min_vce_voltage = 0;
 	u32 max_sclk_vddc, max_mclk_vddci, max_mclk_vddc;
 	u32 max_sclk = 0, max_mclk = 0;
+	u32 high_pixelclock_count = 0;
 	int i;
 
 	if (adev->asic_type == CHIP_HAINAN) {
@@ -3463,6 +3465,35 @@ static void si_apply_state_adjust_rules(struct amdgpu_device *adev,
 		}
 	}
 
+	/* We define "high pixelclock" for SI as higher than necessary for 4K 30Hz.
+	 * For example, 4K 60Hz and 1080p 144Hz fall into this category.
+	 * Find number of such displays connected.
+	 */
+	for (i = 0; i < adev->mode_info.num_crtc; i++) {
+		if (!(adev->pm.dpm.new_active_crtcs & (1 << i)) ||
+			!adev->mode_info.crtcs[i]->enabled)
+			continue;
+
+		conn = to_amdgpu_connector(adev->mode_info.crtcs[i]->connector);
+
+		if (conn->pixelclock_for_modeset > 297000)
+			high_pixelclock_count++;
+	}
+
+	/* These are some ad-hoc fixes to some issues observed with SI GPUs.
+	 * They are necessary because we don't have something like dce_calcs
+	 * for these GPUs to calculate bandwidth requirements.
+	 */
+	if (high_pixelclock_count) {
+		/* On Oland, we observe some flickering when two 4K 60Hz
+		 * displays are connected, possibly because voltage is too low.
+		 * Raise the voltage by requiring a higher SCLK.
+		 * (Voltage cannot be adjusted independently without also SCLK.)
+		 */
+		if (high_pixelclock_count > 1 && adev->asic_type == CHIP_OLAND)
+			disable_sclk_switching = true;
+	}
+
 	if (rps->vce_active) {
 		rps->evclk = adev->pm.dpm.vce_states[adev->pm.dpm.vce_level].evclk;
 		rps->ecclk = adev->pm.dpm.vce_states[adev->pm.dpm.vce_level].ecclk;
-- 
2.51.0

[PATCH 6.6 092/196] wifi: mwifiex: send world regulatory domain to driver

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stefan Kerkmann <s.kerkmann@pengutronix.de>

[ Upstream commit 56819d00bc2ebaa6308913c28680da5d896852b8 ]

The world regulatory domain is a restrictive subset of channel
configurations which allows legal operation of the adapter all over the
world. Changing to this domain should not be prevented.

Fixes: dd4a9ac05c8e1 ("mwifiex: send regulatory domain info to firmware only if alpha2 changed") changed
Signed-off-by: Stefan Kerkmann <s.kerkmann@pengutronix.de>
Reviewed-by: Jeff Chen <jeff.chen_1@nxp.con>
Link: https://patch.msgid.link/20250804-fix-mwifiex-regulatory-domain-v1-1-e4715c770c4d@pengutronix.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/marvell/mwifiex/cfg80211.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/cfg80211.c b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
index 69eea0628e670..df6e4a112ec48 100644
--- a/drivers/net/wireless/marvell/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
@@ -659,10 +659,9 @@ static void mwifiex_reg_notifier(struct wiphy *wiphy,
 		return;
 	}
 
-	/* Don't send world or same regdom info to firmware */
-	if (strncmp(request->alpha2, "00", 2) &&
-	    strncmp(request->alpha2, adapter->country_code,
-		    sizeof(request->alpha2))) {
+	/* Don't send same regdom info to firmware */
+	if (strncmp(request->alpha2, adapter->country_code,
+		    sizeof(request->alpha2)) != 0) {
 		memcpy(adapter->country_code, request->alpha2,
 		       sizeof(request->alpha2));
 		mwifiex_send_domain_info_cmd_fw(wiphy);
-- 
2.51.0

[PATCH 6.6 093/196] PCI: tegra: Fix devm_kcalloc() argument order for port->phys allocation

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alok Tiwari <alok.a.tiwari@oracle.com>

[ Upstream commit e1a8805e5d263453ad76a4f50ab3b1c18ea07560 ]

Fix incorrect argument order in devm_kcalloc() when allocating port->phys.
The original call used sizeof(phy) as the number of elements and
port->lanes as the element size, which is reversed.  While this happens to
produce the correct total allocation size with current pointer size and
lane counts, the argument order is wrong.

Fixes: 6fe7c187e026 ("PCI: tegra: Support per-lane PHYs")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
[mani: added Fixes tag]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250819150436.3105973-1-alok.a.tiwari@oracle.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/pci-tegra.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/controller/pci-tegra.c b/drivers/pci/controller/pci-tegra.c
index 038d974a318ea..80d975dcb2ee2 100644
--- a/drivers/pci/controller/pci-tegra.c
+++ b/drivers/pci/controller/pci-tegra.c
@@ -1343,7 +1343,7 @@ static int tegra_pcie_port_get_phys(struct tegra_pcie_port *port)
 	unsigned int i;
 	int err;
 
-	port->phys = devm_kcalloc(dev, sizeof(phy), port->lanes, GFP_KERNEL);
+	port->phys = devm_kcalloc(dev, port->lanes, sizeof(phy), GFP_KERNEL);
 	if (!port->phys)
 		return -ENOMEM;
 
-- 
2.51.0

[PATCH 6.6 094/196] tcp: fix __tcp_close() to only send RST when required

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 5f9238530970f2993b23dd67fdaffc552a2d2e98 ]

If the receive queue contains payload that was already
received, __tcp_close() can send an unexpected RST.

Refine the code to take tp->copied_seq into account,
as we already do in tcp recvmsg().

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250903084720.1168904-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/tcp.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 40a2f172be2cb..7d824578f217a 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -2786,8 +2786,8 @@ bool tcp_check_oom(struct sock *sk, int shift)
 
 void __tcp_close(struct sock *sk, long timeout)
 {
+	bool data_was_unread = false;
 	struct sk_buff *skb;
-	int data_was_unread = 0;
 	int state;
 
 	WRITE_ONCE(sk->sk_shutdown, SHUTDOWN_MASK);
@@ -2806,11 +2806,12 @@ void __tcp_close(struct sock *sk, long timeout)
 	 *  reader process may not have drained the data yet!
 	 */
 	while ((skb = __skb_dequeue(&sk->sk_receive_queue)) != NULL) {
-		u32 len = TCP_SKB_CB(skb)->end_seq - TCP_SKB_CB(skb)->seq;
+		u32 end_seq = TCP_SKB_CB(skb)->end_seq;
 
 		if (TCP_SKB_CB(skb)->tcp_flags & TCPHDR_FIN)
-			len--;
-		data_was_unread += len;
+			end_seq--;
+		if (after(end_seq, tcp_sk(sk)->copied_seq))
+			data_was_unread = true;
 		__kfree_skb(skb);
 	}
 
-- 
2.51.0

[PATCH 6.6 095/196] drm/amdkfd: Fix error code sign for EINVAL in svm_ioctl()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Qianfeng Rong <rongqianfeng@vivo.com>

[ Upstream commit cbda64f3f58027f68211dda8ea94d52d7e493995 ]

Use negative error code -EINVAL instead of positive EINVAL in the default
case of svm_ioctl() to conform to Linux kernel error code conventions.

Fixes: 42de677f7999 ("drm/amdkfd: register svm range")
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdkfd/kfd_svm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_svm.c b/drivers/gpu/drm/amd/amdkfd/kfd_svm.c
index b77b472332316..3168d6fb11e76 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_svm.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_svm.c
@@ -4142,7 +4142,7 @@ svm_ioctl(struct kfd_process *p, enum kfd_ioctl_svm_op op, uint64_t start,
 		r = svm_range_get_attr(p, mm, start, size, nattrs, attrs);
 		break;
 	default:
-		r = EINVAL;
+		r = -EINVAL;
 		break;
 	}
 
-- 
2.51.0

[PATCH 6.6 096/196] usb: phy: twl6030: Fix incorrect type for ret

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Xichao Zhao <zhao.xichao@vivo.com>

[ Upstream commit b570b346ddd727c4b41743a6a2f49e7217c5317f ]

In the twl6030_usb_probe(), the variable ret is declared as
a u32 type. However, since ret may receive -ENODEV when accepting
the return value of omap_usb2_set_comparator().Therefore, its type
should be changed to int.

Fixes: 0e98de67bacba ("usb: otg: make twl6030_usb as a comparator driver to omap_usb2")
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Link: https://lore.kernel.org/r/20250822092224.30645-1-zhao.xichao@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/phy/phy-twl6030-usb.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/usb/phy/phy-twl6030-usb.c b/drivers/usb/phy/phy-twl6030-usb.c
index c3ce6b1054f1c..292c32ccae050 100644
--- a/drivers/usb/phy/phy-twl6030-usb.c
+++ b/drivers/usb/phy/phy-twl6030-usb.c
@@ -328,9 +328,8 @@ static int twl6030_set_vbus(struct phy_companion *comparator, bool enabled)
 
 static int twl6030_usb_probe(struct platform_device *pdev)
 {
-	u32 ret;
 	struct twl6030_usb	*twl;
-	int			status, err;
+	int			status, err, ret;
 	struct device_node	*np = pdev->dev.of_node;
 	struct device		*dev = &pdev->dev;
 
-- 
2.51.0

[PATCH 6.6 097/196] usb: gadget: configfs: Correctly set use_os_string at bind

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: William Wu <william.wu@rock-chips.com>

[ Upstream commit e271cc0d25015f4be6c88bd7731444644eb352c2 ]

Once the use_os_string flag is set to true for some functions
(e.g. adb/mtp) which need to response the OS string, and then
if we re-bind the ConfigFS gadget to use the other functions
(e.g. hid) which should not to response the OS string, however,
because the use_os_string flag is still true, so the usb gadget
response the OS string descriptor incorrectly, this can cause
the USB device to be unrecognizable on the Windows system.

An example of this as follows:

echo 1 > os_desc/use
ln -s functions/ffs.adb configs/b.1/function0
start adbd
echo "<udc device>" > UDC   #succeed

stop adbd
rm configs/b.1/function0
echo 0 > os_desc/use
ln -s functions/hid.gs0 configs/b.1/function0
echo "<udc device>" > UDC  #fail to connect on Windows

This patch sets the use_os_string flag to false at bind if
the functions not support OS Descriptors.

Signed-off-by: William Wu <william.wu@rock-chips.com>
Fixes: 87213d388e92 ("usb: gadget: configfs: OS String support")
Link: https://lore.kernel.org/r/1755833769-25434-1-git-send-email-william.wu@rock-chips.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/configfs.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c
index 4c89f7629d530..9e8af571448bf 100644
--- a/drivers/usb/gadget/configfs.c
+++ b/drivers/usb/gadget/configfs.c
@@ -1747,6 +1747,8 @@ static int configfs_composite_bind(struct usb_gadget *gadget,
 		cdev->use_os_string = true;
 		cdev->b_vendor_code = gi->b_vendor_code;
 		memcpy(cdev->qw_sign, gi->qw_sign, OS_STRING_QW_SIGN_LEN);
+	} else {
+		cdev->use_os_string = false;
 	}
 
 	if (gadget_is_otg(gadget) && !otg_desc[0]) {
-- 
2.51.0

[PATCH 6.6 098/196] tty: n_gsm: Dont block input queue by waiting MSC

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Seppo Takalo <seppo.takalo@nordicsemi.no>

[ Upstream commit 3cf0b3c243e56bc43be560617416c1d9f301f44c ]

Currently gsm_queue() processes incoming frames and when opening
a DLC channel it calls gsm_dlci_open() which calls gsm_modem_update().
If basic mode is used it calls gsm_modem_upd_via_msc() and it
cannot block the input queue by waiting the response to come
into the same input queue.

Instead allow sending Modem Status Command without waiting for remote
end to respond. Define a new function gsm_modem_send_initial_msc()
for this purpose. As MSC is only valid for basic encoding, it does
not do anything for advanced or when convergence layer type 2 is used.

Fixes: 48473802506d ("tty: n_gsm: fix missing update of modem controls after DLCI open")
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Link: https://lore.kernel.org/r/20250827123221.1148666-1-seppo.takalo@nordicsemi.no
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/n_gsm.c | 25 ++++++++++++++++++++++++-
 1 file changed, 24 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 8559ba1361c64..901f5c8311fbf 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -460,6 +460,7 @@ static int gsm_send_packet(struct gsm_mux *gsm, struct gsm_msg *msg);
 static struct gsm_dlci *gsm_dlci_alloc(struct gsm_mux *gsm, int addr);
 static void gsmld_write_trigger(struct gsm_mux *gsm);
 static void gsmld_write_task(struct work_struct *work);
+static int gsm_modem_send_initial_msc(struct gsm_dlci *dlci);
 
 /**
  *	gsm_fcs_add	-	update FCS
@@ -2173,7 +2174,7 @@ static void gsm_dlci_open(struct gsm_dlci *dlci)
 		pr_debug("DLCI %d goes open.\n", dlci->addr);
 	/* Send current modem state */
 	if (dlci->addr) {
-		gsm_modem_update(dlci, 0);
+		gsm_modem_send_initial_msc(dlci);
 	} else {
 		/* Start keep-alive control */
 		gsm->ka_num = 0;
@@ -4156,6 +4157,28 @@ static int gsm_modem_upd_via_msc(struct gsm_dlci *dlci, u8 brk)
 	return gsm_control_wait(dlci->gsm, ctrl);
 }
 
+/**
+ * gsm_modem_send_initial_msc - Send initial modem status message
+ *
+ * @dlci channel
+ *
+ * Send an initial MSC message after DLCI open to set the initial
+ * modem status lines. This is only done for basic mode.
+ * Does not wait for a response as we cannot block the input queue
+ * processing.
+ */
+static int gsm_modem_send_initial_msc(struct gsm_dlci *dlci)
+{
+	u8 modembits[2];
+
+	if (dlci->adaption != 1 || dlci->gsm->encoding != GSM_BASIC_OPT)
+		return 0;
+
+	modembits[0] = (dlci->addr << 2) | 2 | EA; /* DLCI, Valid, EA */
+	modembits[1] = (gsm_encode_modem(dlci) << 1) | EA;
+	return gsm_control_command(dlci->gsm, CMD_MSC, (const u8 *)&modembits, 2);
+}
+
 /**
  *	gsm_modem_update	-	send modem status line state
  *	@dlci: channel
-- 
2.51.0

[PATCH 6.6 099/196] misc: genwqe: Fix incorrect cmd field being reported in error

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Colin Ian King <colin.i.king@gmail.com>

[ Upstream commit 6b26053819dccc664120e07c56f107fb6f72f3fa ]

There is a dev_err message that is reporting the value of
cmd->asiv_length when it should be reporting cmd->asv_length
instead. Fix this.

Fixes: eaf4722d4645 ("GenWQE Character device and DDCB queue")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20250902113712.2624743-1-colin.i.king@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/misc/genwqe/card_ddcb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/misc/genwqe/card_ddcb.c b/drivers/misc/genwqe/card_ddcb.c
index 500b1feaf1f6f..fd7d5cd50d396 100644
--- a/drivers/misc/genwqe/card_ddcb.c
+++ b/drivers/misc/genwqe/card_ddcb.c
@@ -923,7 +923,7 @@ int __genwqe_execute_raw_ddcb(struct genwqe_dev *cd,
 	}
 	if (cmd->asv_length > DDCB_ASV_LENGTH) {
 		dev_err(&pci_dev->dev, "[%s] err: wrong asv_length of %d\n",
-			__func__, cmd->asiv_length);
+			__func__, cmd->asv_length);
 		return -EINVAL;
 	}
 	rc = __genwqe_enqueue_ddcb(cd, req, f_flags);
-- 
2.51.0

[PATCH 6.6 100/196] pps: fix warning in pps_register_cdev when register device fail

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wang Liang <wangliang74@huawei.com>

[ Upstream commit b0531cdba5029f897da5156815e3bdafe1e9b88d ]

Similar to previous commit 2a934fdb01db ("media: v4l2-dev: fix error
handling in __video_register_device()"), the release hook should be set
before device_register(). Otherwise, when device_register() return error
and put_device() try to callback the release function, the below warning
may happen.

  ------------[ cut here ]------------
  WARNING: CPU: 1 PID: 4760 at drivers/base/core.c:2567 device_release+0x1bd/0x240 drivers/base/core.c:2567
  Modules linked in:
  CPU: 1 UID: 0 PID: 4760 Comm: syz.4.914 Not tainted 6.17.0-rc3+ #1 NONE
  RIP: 0010:device_release+0x1bd/0x240 drivers/base/core.c:2567
  Call Trace:
   <TASK>
   kobject_cleanup+0x136/0x410 lib/kobject.c:689
   kobject_release lib/kobject.c:720 [inline]
   kref_put include/linux/kref.h:65 [inline]
   kobject_put+0xe9/0x130 lib/kobject.c:737
   put_device+0x24/0x30 drivers/base/core.c:3797
   pps_register_cdev+0x2da/0x370 drivers/pps/pps.c:402
   pps_register_source+0x2f6/0x480 drivers/pps/kapi.c:108
   pps_tty_open+0x190/0x310 drivers/pps/clients/pps-ldisc.c:57
   tty_ldisc_open+0xa7/0x120 drivers/tty/tty_ldisc.c:432
   tty_set_ldisc+0x333/0x780 drivers/tty/tty_ldisc.c:563
   tiocsetd drivers/tty/tty_io.c:2429 [inline]
   tty_ioctl+0x5d1/0x1700 drivers/tty/tty_io.c:2728
   vfs_ioctl fs/ioctl.c:51 [inline]
   __do_sys_ioctl fs/ioctl.c:598 [inline]
   __se_sys_ioctl fs/ioctl.c:584 [inline]
   __x64_sys_ioctl+0x194/0x210 fs/ioctl.c:584
   do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
   do_syscall_64+0x5f/0x2a0 arch/x86/entry/syscall_64.c:94
   entry_SYSCALL_64_after_hwframe+0x76/0x7e
   </TASK>

Before commit c79a39dc8d06 ("pps: Fix a use-after-free"),
pps_register_cdev() call device_create() to create pps->dev, which will
init dev->release to device_create_release(). Now the comment is outdated,
just remove it.

Thanks for the reminder from Calvin Owens, 'kfree_pps' should be removed
in pps_register_source() to avoid a double free in the failure case.

Link: https://lore.kernel.org/all/20250827065010.3208525-1-wangliang74@huawei.com/
Fixes: c79a39dc8d06 ("pps: Fix a use-after-free")
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Reviewed-By: Calvin Owens <calvin@wbinvd.org>
Link: https://lore.kernel.org/r/20250830075023.3498174-1-wangliang74@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pps/kapi.c | 5 +----
 drivers/pps/pps.c  | 5 ++---
 2 files changed, 3 insertions(+), 7 deletions(-)

diff --git a/drivers/pps/kapi.c b/drivers/pps/kapi.c
index 92d1b62ea239d..e9389876229ea 100644
--- a/drivers/pps/kapi.c
+++ b/drivers/pps/kapi.c
@@ -109,16 +109,13 @@ struct pps_device *pps_register_source(struct pps_source_info *info,
 	if (err < 0) {
 		pr_err("%s: unable to create char device\n",
 					info->name);
-		goto kfree_pps;
+		goto pps_register_source_exit;
 	}
 
 	dev_dbg(&pps->dev, "new PPS source %s\n", info->name);
 
 	return pps;
 
-kfree_pps:
-	kfree(pps);
-
 pps_register_source_exit:
 	pr_err("%s: unable to register source\n", info->name);
 
diff --git a/drivers/pps/pps.c b/drivers/pps/pps.c
index e1689957736d9..9539695b337a8 100644
--- a/drivers/pps/pps.c
+++ b/drivers/pps/pps.c
@@ -375,6 +375,7 @@ int pps_register_cdev(struct pps_device *pps)
 			       pps->info.name);
 			err = -EBUSY;
 		}
+		kfree(pps);
 		goto out_unlock;
 	}
 	pps->id = err;
@@ -384,13 +385,11 @@ int pps_register_cdev(struct pps_device *pps)
 	pps->dev.devt = MKDEV(pps_major, pps->id);
 	dev_set_drvdata(&pps->dev, pps);
 	dev_set_name(&pps->dev, "pps%d", pps->id);
+	pps->dev.release = pps_device_destruct;
 	err = device_register(&pps->dev);
 	if (err)
 		goto free_idr;
 
-	/* Override the release function with our own */
-	pps->dev.release = pps_device_destruct;
-
 	pr_debug("source %s got cdev (%d:%d)\n", pps->info.name, pps_major,
 		 pps->id);
 
-- 
2.51.0

[PATCH 6.6 101/196] ASoC: Intel: bytcht_es8316: Fix invalid quirk input mapping

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit b20eb0e8de383116f1e1470d74da2a3c83c4e345 ]

When an invalid value is passed via quirk option, currently
bytcht_es8316 driver just ignores and leaves as is, which may lead to
unepxected results like OOB access.

This patch adds the sanity check and corrects the input mapping to the
certain default value if an invalid value is passed.

Fixes: 249d2fc9e55c ("ASoC: Intel: bytcht_es8316: Set card long_name based on quirks")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20250902171826.27329-2-tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/bytcht_es8316.c | 20 +++++++++++++++++---
 1 file changed, 17 insertions(+), 3 deletions(-)

diff --git a/sound/soc/intel/boards/bytcht_es8316.c b/sound/soc/intel/boards/bytcht_es8316.c
index 7a30d2d36f199..fbd7e1f0783fd 100644
--- a/sound/soc/intel/boards/bytcht_es8316.c
+++ b/sound/soc/intel/boards/bytcht_es8316.c
@@ -46,7 +46,8 @@ enum {
 	BYT_CHT_ES8316_INTMIC_IN2_MAP,
 };
 
-#define BYT_CHT_ES8316_MAP(quirk)		((quirk) & GENMASK(3, 0))
+#define BYT_CHT_ES8316_MAP_MASK			GENMASK(3, 0)
+#define BYT_CHT_ES8316_MAP(quirk)		((quirk) & BYT_CHT_ES8316_MAP_MASK)
 #define BYT_CHT_ES8316_SSP0			BIT(16)
 #define BYT_CHT_ES8316_MONO_SPEAKER		BIT(17)
 #define BYT_CHT_ES8316_JD_INVERTED		BIT(18)
@@ -59,10 +60,23 @@ MODULE_PARM_DESC(quirk, "Board-specific quirk override");
 
 static void log_quirks(struct device *dev)
 {
-	if (BYT_CHT_ES8316_MAP(quirk) == BYT_CHT_ES8316_INTMIC_IN1_MAP)
+	int map;
+
+	map = BYT_CHT_ES8316_MAP(quirk);
+	switch (map) {
+	case BYT_CHT_ES8316_INTMIC_IN1_MAP:
 		dev_info(dev, "quirk IN1_MAP enabled");
-	if (BYT_CHT_ES8316_MAP(quirk) == BYT_CHT_ES8316_INTMIC_IN2_MAP)
+		break;
+	case BYT_CHT_ES8316_INTMIC_IN2_MAP:
 		dev_info(dev, "quirk IN2_MAP enabled");
+		break;
+	default:
+		dev_warn_once(dev, "quirk sets invalid input map: 0x%x, default to INTMIC_IN1_MAP\n", map);
+		quirk &= ~BYT_CHT_ES8316_MAP_MASK;
+		quirk |= BYT_CHT_ES8316_INTMIC_IN1_MAP;
+		break;
+	}
+
 	if (quirk & BYT_CHT_ES8316_SSP0)
 		dev_info(dev, "quirk SSP0 enabled");
 	if (quirk & BYT_CHT_ES8316_MONO_SPEAKER)
-- 
2.51.0

[PATCH 6.6 102/196] ASoC: Intel: bytcr_rt5640: Fix invalid quirk input mapping

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit fba404e4b4af4f4f747bb0e41e9fff7d03c7bcc0 ]

When an invalid value is passed via quirk option, currently
bytcr_rt5640 driver only shows an error message but leaves as is.
This may lead to unepxected results like OOB access.

This patch corrects the input mapping to the certain default value if
an invalid value is passed.

Fixes: 063422ca2a9d ("ASoC: Intel: bytcr_rt5640: Set card long_name based on quirks")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20250902171826.27329-3-tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/bytcr_rt5640.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index 6a85e8fdcae64..beca466dd468e 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -68,7 +68,8 @@ enum {
 	BYT_RT5640_OVCD_SF_1P5		= (RT5640_OVCD_SF_1P5 << 13),
 };
 
-#define BYT_RT5640_MAP(quirk)		((quirk) &  GENMASK(3, 0))
+#define BYT_RT5640_MAP_MASK		GENMASK(3, 0)
+#define BYT_RT5640_MAP(quirk)		((quirk) & BYT_RT5640_MAP_MASK)
 #define BYT_RT5640_JDSRC(quirk)		(((quirk) & GENMASK(7, 4)) >> 4)
 #define BYT_RT5640_OVCD_TH(quirk)	(((quirk) & GENMASK(12, 8)) >> 8)
 #define BYT_RT5640_OVCD_SF(quirk)	(((quirk) & GENMASK(14, 13)) >> 13)
@@ -140,7 +141,9 @@ static void log_quirks(struct device *dev)
 		dev_info(dev, "quirk NO_INTERNAL_MIC_MAP enabled\n");
 		break;
 	default:
-		dev_err(dev, "quirk map 0x%x is not supported, microphone input will not work\n", map);
+		dev_warn_once(dev, "quirk sets invalid input map: 0x%x, default to DMIC1_MAP\n", map);
+		byt_rt5640_quirk &= ~BYT_RT5640_MAP_MASK;
+		byt_rt5640_quirk |= BYT_RT5640_DMIC1_MAP;
 		break;
 	}
 	if (byt_rt5640_quirk & BYT_RT5640_HSMIC2_ON_IN1)
-- 
2.51.0

[PATCH 6.6 103/196] ASoC: Intel: bytcr_rt5651: Fix invalid quirk input mapping

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 4336efb59ef364e691ef829a73d9dbd4d5ed7c7b ]

When an invalid value is passed via quirk option, currently
bytcr_rt5640 driver just ignores and leaves as is, which may lead to
unepxected results like OOB access.

This patch adds the sanity check and corrects the input mapping to the
certain default value if an invalid value is passed.

Fixes: 64484ccee7af ("ASoC: Intel: bytcr_rt5651: Set card long_name based on quirks")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20250902171826.27329-4-tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/bytcr_rt5651.c | 26 +++++++++++++++++++++-----
 1 file changed, 21 insertions(+), 5 deletions(-)

diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c
index 805afaf47b290..2abe47303ecdb 100644
--- a/sound/soc/intel/boards/bytcr_rt5651.c
+++ b/sound/soc/intel/boards/bytcr_rt5651.c
@@ -58,7 +58,8 @@ enum {
 	BYT_RT5651_OVCD_SF_1P5	= (RT5651_OVCD_SF_1P5 << 13),
 };
 
-#define BYT_RT5651_MAP(quirk)		((quirk) & GENMASK(3, 0))
+#define BYT_RT5651_MAP_MASK		GENMASK(3, 0)
+#define BYT_RT5651_MAP(quirk)		((quirk) & BYT_RT5651_MAP_MASK)
 #define BYT_RT5651_JDSRC(quirk)		(((quirk) & GENMASK(7, 4)) >> 4)
 #define BYT_RT5651_OVCD_TH(quirk)	(((quirk) & GENMASK(12, 8)) >> 8)
 #define BYT_RT5651_OVCD_SF(quirk)	(((quirk) & GENMASK(14, 13)) >> 13)
@@ -100,14 +101,29 @@ MODULE_PARM_DESC(quirk, "Board-specific quirk override");
 
 static void log_quirks(struct device *dev)
 {
-	if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_DMIC_MAP)
+	int map;
+
+	map = BYT_RT5651_MAP(byt_rt5651_quirk);
+	switch (map) {
+	case BYT_RT5651_DMIC_MAP:
 		dev_info(dev, "quirk DMIC_MAP enabled");
-	if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN1_MAP)
+		break;
+	case BYT_RT5651_IN1_MAP:
 		dev_info(dev, "quirk IN1_MAP enabled");
-	if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN2_MAP)
+		break;
+	case BYT_RT5651_IN2_MAP:
 		dev_info(dev, "quirk IN2_MAP enabled");
-	if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN1_IN2_MAP)
+		break;
+	case BYT_RT5651_IN1_IN2_MAP:
 		dev_info(dev, "quirk IN1_IN2_MAP enabled");
+		break;
+	default:
+		dev_warn_once(dev, "quirk sets invalid input map: 0x%x, default to DMIC_MAP\n", map);
+		byt_rt5651_quirk &= ~BYT_RT5651_MAP_MASK;
+		byt_rt5651_quirk |= BYT_RT5651_DMIC_MAP;
+		break;
+	}
+
 	if (BYT_RT5651_JDSRC(byt_rt5651_quirk)) {
 		dev_info(dev, "quirk realtek,jack-detect-source %ld\n",
 			 BYT_RT5651_JDSRC(byt_rt5651_quirk));
-- 
2.51.0

[PATCH 6.6 104/196] drm/msm/dpu: fix incorrect type for ret

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Qianfeng Rong <rongqianfeng@vivo.com>

[ Upstream commit 88ec0e01a880e3326794e149efae39e3aa4dbbec ]

Change 'ret' from unsigned long to int, as storing negative error codes
in an unsigned long makes it never equal to -ETIMEDOUT, causing logical
errors.

Fixes: d7d0e73f7de3 ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback")
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/671100/
Link: https://lore.kernel.org/r/20250826092047.224341-1-rongqianfeng@vivo.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c
index 0a45c546b03f2..a5cd41c9224d7 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c
@@ -433,7 +433,7 @@ static void _dpu_encoder_phys_wb_handle_wbdone_timeout(
 static int dpu_encoder_phys_wb_wait_for_commit_done(
 		struct dpu_encoder_phys *phys_enc)
 {
-	unsigned long ret;
+	int ret;
 	struct dpu_encoder_wait_info wait_info;
 	struct dpu_encoder_phys_wb *wb_enc = to_dpu_encoder_phys_wb(phys_enc);
 
-- 
2.51.0

[PATCH 6.6 105/196] fs: ntfs3: Fix integer overflow in run_unpack()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vitaly Grigoryev <Vitaly.Grigoryev@kaspersky.com>

[ Upstream commit 736fc7bf5f68f6b74a0925b7e072c571838657d2 ]

The MFT record relative to the file being opened contains its runlist,
an array containing information about the file's location on the physical
disk. Analysis of all Call Stack paths showed that the values of the
runlist array, from which LCNs are calculated, are not validated before
run_unpack function.

The run_unpack function decodes the compressed runlist data format
from MFT attributes (for example, $DATA), converting them into a runs_tree
structure, which describes the mapping of virtual clusters (VCN) to
logical clusters (LCN). The NTFS3 subsystem also has a shortcut for
deleting files from MFT records - in this case, the RUN_DEALLOCATE
command is sent to the run_unpack input, and the function logic
provides that all data transferred to the runlist about file or
directory is deleted without creating a runs_tree structure.

Substituting the runlist in the $DATA attribute of the MFT record for an
arbitrary file can lead either to access to arbitrary data on the disk
bypassing access checks to them (since the inode access check
occurs above) or to destruction of arbitrary data on the disk.

Add overflow check for addition operation.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 4342306f0f0d ("fs/ntfs3: Add file operations and implementation")
Signed-off-by: Vitaly Grigoryev <Vitaly.Grigoryev@kaspersky.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ntfs3/run.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/fs/ntfs3/run.c b/fs/ntfs3/run.c
index 44e93ad491ba7..0139124578d9e 100644
--- a/fs/ntfs3/run.c
+++ b/fs/ntfs3/run.c
@@ -9,6 +9,7 @@
 #include <linux/blkdev.h>
 #include <linux/fs.h>
 #include <linux/log2.h>
+#include <linux/overflow.h>
 
 #include "debug.h"
 #include "ntfs.h"
@@ -982,12 +983,16 @@ int run_unpack(struct runs_tree *run, struct ntfs_sb_info *sbi, CLST ino,
 
 			if (!dlcn)
 				return -EINVAL;
-			lcn = prev_lcn + dlcn;
+
+			if (check_add_overflow(prev_lcn, dlcn, &lcn))
+				return -EINVAL;
 			prev_lcn = lcn;
 		} else
 			return -EINVAL;
 
-		next_vcn = vcn64 + len;
+		if (check_add_overflow(vcn64, len, &next_vcn))
+			return -EINVAL;
+
 		/* Check boundary. */
 		if (next_vcn > evcn + 1)
 			return -EINVAL;
@@ -1151,7 +1156,8 @@ int run_get_highest_vcn(CLST vcn, const u8 *run_buf, u64 *highest_vcn)
 			return -EINVAL;
 
 		run_buf += size_size + offset_size;
-		vcn64 += len;
+		if (check_add_overflow(vcn64, len, &vcn64))
+			return -EINVAL;
 
 #ifndef CONFIG_NTFS3_64BIT_CLUSTER
 		if (vcn64 > 0x100000000ull)
-- 
2.51.0

[PATCH 6.6 106/196] fs/ntfs3: reject index allocation if $BITMAP is empty but blocks exist

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Moon Hee Lee <moonhee.lee.ca@gmail.com>

[ Upstream commit 0dc7117da8f92dd5fe077d712a756eccbe377d40 ]

Index allocation requires at least one bit in the $BITMAP attribute to
track usage of index entries. If the bitmap is empty while index blocks
are already present, this reflects on-disk corruption.

syzbot triggered this condition using a malformed NTFS image. During a
rename() operation involving a long filename (which spans multiple
index entries), the empty bitmap allowed the name to be added without
valid tracking. Subsequent deletion of the original entry failed with
-ENOENT, due to unexpected index state.

Reject such cases by verifying that the bitmap is not empty when index
blocks exist.

Reported-by: syzbot+b0373017f711c06ada64@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b0373017f711c06ada64
Fixes: d99208b91933 ("fs/ntfs3: cancle set bad inode after removing name fails")
Tested-by: syzbot+b0373017f711c06ada64@syzkaller.appspotmail.com
Signed-off-by: Moon Hee Lee <moonhee.lee.ca@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ntfs3/index.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/fs/ntfs3/index.c b/fs/ntfs3/index.c
index 191b91ffadbb2..f227db9f76c2b 100644
--- a/fs/ntfs3/index.c
+++ b/fs/ntfs3/index.c
@@ -1510,6 +1510,16 @@ static int indx_add_allocate(struct ntfs_index *indx, struct ntfs_inode *ni,
 			bmp_size = bmp_size_v = le32_to_cpu(bmp->res.data_size);
 		}
 
+		/*
+		 * Index blocks exist, but $BITMAP has zero valid bits.
+		 * This implies an on-disk corruption and must be rejected.
+		 */
+		if (in->name == I30_NAME &&
+		    unlikely(bmp_size_v == 0 && indx->alloc_run.count)) {
+			err = -EINVAL;
+			goto out1;
+		}
+
 		bit = bmp_size << 3;
 	}
 
-- 
2.51.0

[PATCH 6.6 107/196] iio: consumers: Fix handling of negative channel scale in iio_convert_raw_to_processed()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hansg@kernel.org>

[ Upstream commit 0f85406bf830eb8747dd555ab53c9d97ee4af293 ]

There is an issue with the handling of negative channel scales
in iio_convert_raw_to_processed_unlocked() when the channel-scale
is of the IIO_VAL_INT_PLUS_[MICRO|NANO] type:

Things work for channel-scale values > -1.0 and < 0.0 because of
the use of signed values in:

	*processed += div_s64(raw64 * (s64)scale_val2 * scale, 1000000LL);

Things will break however for scale values < -1.0. Lets for example say
that raw = 2, (caller-provided)scale = 10 and (channel)scale_val = -1.5.

The result should then be 2 * 10 * -1.5 = -30.

channel-scale = -1.5 means scale_val = -1 and scale_val2 = 500000,
now lets see what gets stored in processed:

1. *processed = raw64 * scale_val * scale;
2. *processed += raw64 * scale_val2 * scale / 1000000LL;

1. Sets processed to 2 * -1 * 10 = -20
2. Adds 2 * 500000 * 10 / 1000000 = 10 to processed

And the end result is processed = -20 + 10 = -10, which is not correct.

Fix this by always using the abs value of both scale_val and scale_val2
and if either is negative multiply the end-result by -1.

Note there seems to be an unwritten rule about negative
IIO_VAL_INT_PLUS_[MICRO|NANO] values that:

i.   values > -1.0 and < 0.0 are written as val=0 val2=-xxx
ii.  values <= -1.0 are written as val=-xxx val2=xxx

But iio_format_value() will also correctly display a third option:

iii. values <= -1.0 written as val=-xxx val2=-xxx

Since iio_format_value() uses abs(val) when val2 < 0.

This fix also makes iio_convert_raw_to_processed() properly handle
channel-scales using this third option.

Fixes: 48e44ce0f881 ("iio:inkern: Add function to read the processed value")
Cc: Matteo Martelli <matteomartelli3@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://patch.msgid.link/20250831104825.15097-2-hansg@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/inkern.c | 28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/drivers/iio/inkern.c b/drivers/iio/inkern.c
index 8255035ff124f..34abbf46916cc 100644
--- a/drivers/iio/inkern.c
+++ b/drivers/iio/inkern.c
@@ -9,6 +9,7 @@
 #include <linux/mutex.h>
 #include <linux/property.h>
 #include <linux/slab.h>
+#include <linux/units.h>
 
 #include <linux/iio/iio.h>
 #include <linux/iio/iio-opaque.h>
@@ -635,7 +636,7 @@ static int iio_convert_raw_to_processed_unlocked(struct iio_channel *chan,
 {
 	int scale_type, scale_val, scale_val2;
 	int offset_type, offset_val, offset_val2;
-	s64 raw64 = raw;
+	s64 denominator, raw64 = raw;
 
 	offset_type = iio_channel_read(chan, &offset_val, &offset_val2,
 				       IIO_CHAN_INFO_OFFSET);
@@ -679,20 +680,19 @@ static int iio_convert_raw_to_processed_unlocked(struct iio_channel *chan,
 		*processed = raw64 * scale_val * scale;
 		break;
 	case IIO_VAL_INT_PLUS_MICRO:
-		if (scale_val2 < 0)
-			*processed = -raw64 * scale_val * scale;
-		else
-			*processed = raw64 * scale_val * scale;
-		*processed += div_s64(raw64 * (s64)scale_val2 * scale,
-				      1000000LL);
-		break;
 	case IIO_VAL_INT_PLUS_NANO:
-		if (scale_val2 < 0)
-			*processed = -raw64 * scale_val * scale;
-		else
-			*processed = raw64 * scale_val * scale;
-		*processed += div_s64(raw64 * (s64)scale_val2 * scale,
-				      1000000000LL);
+		switch (scale_type) {
+		case IIO_VAL_INT_PLUS_MICRO:
+			denominator = MICRO;
+			break;
+		case IIO_VAL_INT_PLUS_NANO:
+			denominator = NANO;
+			break;
+		}
+		*processed = raw64 * scale * abs(scale_val);
+		*processed += div_s64(raw64 * scale * abs(scale_val2), denominator);
+		if (scale_val < 0 || scale_val2 < 0)
+			*processed *= -1;
 		break;
 	case IIO_VAL_FRACTIONAL:
 		*processed = div_s64(raw64 * (s64)scale_val * scale,
-- 
2.51.0

[PATCH 6.6 108/196] iio: consumers: Fix offset handling in iio_convert_raw_to_processed()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hansg@kernel.org>

[ Upstream commit 33f5c69c4daff39c010b3ea6da8ebab285f4277b ]

Fix iio_convert_raw_to_processed() offset handling for channels without
a scale attribute.

The offset has been applied to the raw64 value not to the original raw
value. Use the raw64 value so that the offset is taken into account.

Fixes: 14b457fdde38 ("iio: inkern: apply consumer scale when no channel scale is available")
Cc: Liam Beguin <liambeguin@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://patch.msgid.link/20250831104825.15097-3-hansg@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/inkern.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iio/inkern.c b/drivers/iio/inkern.c
index 34abbf46916cc..c7b2ab7870993 100644
--- a/drivers/iio/inkern.c
+++ b/drivers/iio/inkern.c
@@ -671,7 +671,7 @@ static int iio_convert_raw_to_processed_unlocked(struct iio_channel *chan,
 		 * If no channel scaling is available apply consumer scale to
 		 * raw value and return.
 		 */
-		*processed = raw * scale;
+		*processed = raw64 * scale;
 		return 0;
 	}
 
-- 
2.51.0

[PATCH 6.6 109/196] netfilter: ipset: Remove unused htable_bits in macro ahash_region

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Zhen Ni <zhen.ni@easystack.cn>

[ Upstream commit ba941796d7cd1e81f51eed145dad1b47240ff420 ]

Since the ahash_region() macro was redefined to calculate the region
index solely from HTABLE_REGION_BITS, the htable_bits parameter became
unused.

Remove the unused htable_bits argument and its call sites, simplifying
the code without changing semantics.

Fixes: 8478a729c046 ("netfilter: ipset: fix region locking in hash types")
Signed-off-by: Zhen Ni <zhen.ni@easystack.cn>
Reviewed-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/ipset/ip_set_hash_gen.h | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/net/netfilter/ipset/ip_set_hash_gen.h b/net/netfilter/ipset/ip_set_hash_gen.h
index c2d88b1b06b87..20b223e6e93b9 100644
--- a/net/netfilter/ipset/ip_set_hash_gen.h
+++ b/net/netfilter/ipset/ip_set_hash_gen.h
@@ -62,7 +62,7 @@ struct hbucket {
 		: jhash_size((htable_bits) - HTABLE_REGION_BITS))
 #define ahash_sizeof_regions(htable_bits)		\
 	(ahash_numof_locks(htable_bits) * sizeof(struct ip_set_region))
-#define ahash_region(n, htable_bits)		\
+#define ahash_region(n)		\
 	((n) / jhash_size(HTABLE_REGION_BITS))
 #define ahash_bucket_start(h,  htable_bits)	\
 	((htable_bits) < HTABLE_REGION_BITS ? 0	\
@@ -701,7 +701,7 @@ mtype_resize(struct ip_set *set, bool retried)
 #endif
 				key = HKEY(data, h->initval, htable_bits);
 				m = __ipset_dereference(hbucket(t, key));
-				nr = ahash_region(key, htable_bits);
+				nr = ahash_region(key);
 				if (!m) {
 					m = kzalloc(sizeof(*m) +
 					    AHASH_INIT_SIZE * dsize,
@@ -851,7 +851,7 @@ mtype_add(struct ip_set *set, void *value, const struct ip_set_ext *ext,
 	rcu_read_lock_bh();
 	t = rcu_dereference_bh(h->table);
 	key = HKEY(value, h->initval, t->htable_bits);
-	r = ahash_region(key, t->htable_bits);
+	r = ahash_region(key);
 	atomic_inc(&t->uref);
 	elements = t->hregion[r].elements;
 	maxelem = t->maxelem;
@@ -1049,7 +1049,7 @@ mtype_del(struct ip_set *set, void *value, const struct ip_set_ext *ext,
 	rcu_read_lock_bh();
 	t = rcu_dereference_bh(h->table);
 	key = HKEY(value, h->initval, t->htable_bits);
-	r = ahash_region(key, t->htable_bits);
+	r = ahash_region(key);
 	atomic_inc(&t->uref);
 	rcu_read_unlock_bh();
 
-- 
2.51.0

[PATCH 6.6 110/196] ipvs: Use READ_ONCE/WRITE_ONCE for ipvs->enable

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Zhang Tengfei <zhtfdev@gmail.com>

[ Upstream commit 944b6b216c0387ac3050cd8b773819ae360bfb1c ]

KCSAN reported a data-race on the `ipvs->enable` flag, which is
written in the control path and read concurrently from many other
contexts.

Following a suggestion by Julian, this patch fixes the race by
converting all accesses to use `WRITE_ONCE()/READ_ONCE()`.
This lightweight approach ensures atomic access and acts as a
compiler barrier, preventing unsafe optimizations where the flag
is checked in loops (e.g., in ip_vs_est.c).

Additionally, the `enable` checks in the fast-path hooks
(`ip_vs_in_hook`, `ip_vs_out_hook`, `ip_vs_forward_icmp`) are
removed. These are unnecessary since commit 857ca89711de
("ipvs: register hooks only with services"). The `enable=0`
condition they check for can only occur in two rare and non-fatal
scenarios: 1) after hooks are registered but before the flag is set,
and 2) after hooks are unregistered on cleanup_net. In the worst
case, a single packet might be mishandled (e.g., dropped), which
does not lead to a system crash or data corruption. Adding a check
in the performance-critical fast-path to handle this harmless
condition is not a worthwhile trade-off.

Fixes: 857ca89711de ("ipvs: register hooks only with services")
Reported-by: syzbot+1651b5234028c294c339@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=1651b5234028c294c339
Suggested-by: Julian Anastasov <ja@ssi.bg>
Link: https://lore.kernel.org/lvs-devel/2189fc62-e51e-78c9-d1de-d35b8e3657e3@ssi.bg/
Signed-off-by: Zhang Tengfei <zhtfdev@gmail.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/ipvs/ip_vs_conn.c |  4 ++--
 net/netfilter/ipvs/ip_vs_core.c | 11 ++++-------
 net/netfilter/ipvs/ip_vs_ctl.c  |  6 +++---
 net/netfilter/ipvs/ip_vs_est.c  | 16 ++++++++--------
 4 files changed, 17 insertions(+), 20 deletions(-)

diff --git a/net/netfilter/ipvs/ip_vs_conn.c b/net/netfilter/ipvs/ip_vs_conn.c
index 8182833a35828..d9c3eefe8cbb0 100644
--- a/net/netfilter/ipvs/ip_vs_conn.c
+++ b/net/netfilter/ipvs/ip_vs_conn.c
@@ -884,7 +884,7 @@ static void ip_vs_conn_expire(struct timer_list *t)
 			 * conntrack cleanup for the net.
 			 */
 			smp_rmb();
-			if (ipvs->enable)
+			if (READ_ONCE(ipvs->enable))
 				ip_vs_conn_drop_conntrack(cp);
 		}
 
@@ -1432,7 +1432,7 @@ void ip_vs_expire_nodest_conn_flush(struct netns_ipvs *ipvs)
 		cond_resched_rcu();
 
 		/* netns clean up started, abort delayed work */
-		if (!ipvs->enable)
+		if (!READ_ONCE(ipvs->enable))
 			break;
 	}
 	rcu_read_unlock();
diff --git a/net/netfilter/ipvs/ip_vs_core.c b/net/netfilter/ipvs/ip_vs_core.c
index 3230506ae3ffd..34c4648ba36ec 100644
--- a/net/netfilter/ipvs/ip_vs_core.c
+++ b/net/netfilter/ipvs/ip_vs_core.c
@@ -1353,9 +1353,6 @@ ip_vs_out_hook(void *priv, struct sk_buff *skb, const struct nf_hook_state *stat
 	if (unlikely(!skb_dst(skb)))
 		return NF_ACCEPT;
 
-	if (!ipvs->enable)
-		return NF_ACCEPT;
-
 	ip_vs_fill_iph_skb(af, skb, false, &iph);
 #ifdef CONFIG_IP_VS_IPV6
 	if (af == AF_INET6) {
@@ -1936,7 +1933,7 @@ ip_vs_in_hook(void *priv, struct sk_buff *skb, const struct nf_hook_state *state
 		return NF_ACCEPT;
 	}
 	/* ipvs enabled in this netns ? */
-	if (unlikely(sysctl_backup_only(ipvs) || !ipvs->enable))
+	if (unlikely(sysctl_backup_only(ipvs)))
 		return NF_ACCEPT;
 
 	ip_vs_fill_iph_skb(af, skb, false, &iph);
@@ -2104,7 +2101,7 @@ ip_vs_forward_icmp(void *priv, struct sk_buff *skb,
 	int r;
 
 	/* ipvs enabled in this netns ? */
-	if (unlikely(sysctl_backup_only(ipvs) || !ipvs->enable))
+	if (unlikely(sysctl_backup_only(ipvs)))
 		return NF_ACCEPT;
 
 	if (state->pf == NFPROTO_IPV4) {
@@ -2291,7 +2288,7 @@ static int __net_init __ip_vs_init(struct net *net)
 		return -ENOMEM;
 
 	/* Hold the beast until a service is registered */
-	ipvs->enable = 0;
+	WRITE_ONCE(ipvs->enable, 0);
 	ipvs->net = net;
 	/* Counters used for creating unique names */
 	ipvs->gen = atomic_read(&ipvs_netns_cnt);
@@ -2363,7 +2360,7 @@ static void __net_exit __ip_vs_dev_cleanup_batch(struct list_head *net_list)
 		ipvs = net_ipvs(net);
 		ip_vs_unregister_hooks(ipvs, AF_INET);
 		ip_vs_unregister_hooks(ipvs, AF_INET6);
-		ipvs->enable = 0;	/* Disable packet reception */
+		WRITE_ONCE(ipvs->enable, 0);	/* Disable packet reception */
 		smp_wmb();
 		ip_vs_sync_net_cleanup(ipvs);
 	}
diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c
index ae76542de3e98..c82dcbb4dabce 100644
--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -256,7 +256,7 @@ static void est_reload_work_handler(struct work_struct *work)
 		struct ip_vs_est_kt_data *kd = ipvs->est_kt_arr[id];
 
 		/* netns clean up started, abort delayed work */
-		if (!ipvs->enable)
+		if (!READ_ONCE(ipvs->enable))
 			goto unlock;
 		if (!kd)
 			continue;
@@ -1482,9 +1482,9 @@ ip_vs_add_service(struct netns_ipvs *ipvs, struct ip_vs_service_user_kern *u,
 
 	*svc_p = svc;
 
-	if (!ipvs->enable) {
+	if (!READ_ONCE(ipvs->enable)) {
 		/* Now there is a service - full throttle */
-		ipvs->enable = 1;
+		WRITE_ONCE(ipvs->enable, 1);
 
 		/* Start estimation for first time */
 		ip_vs_est_reload_start(ipvs);
diff --git a/net/netfilter/ipvs/ip_vs_est.c b/net/netfilter/ipvs/ip_vs_est.c
index c5970ba416aea..b48d3a09e2174 100644
--- a/net/netfilter/ipvs/ip_vs_est.c
+++ b/net/netfilter/ipvs/ip_vs_est.c
@@ -230,7 +230,7 @@ static int ip_vs_estimation_kthread(void *data)
 void ip_vs_est_reload_start(struct netns_ipvs *ipvs)
 {
 	/* Ignore reloads before first service is added */
-	if (!ipvs->enable)
+	if (!READ_ONCE(ipvs->enable))
 		return;
 	ip_vs_est_stopped_recalc(ipvs);
 	/* Bump the kthread configuration genid */
@@ -304,7 +304,7 @@ static int ip_vs_est_add_kthread(struct netns_ipvs *ipvs)
 	int i;
 
 	if ((unsigned long)ipvs->est_kt_count >= ipvs->est_max_threads &&
-	    ipvs->enable && ipvs->est_max_threads)
+	    READ_ONCE(ipvs->enable) && ipvs->est_max_threads)
 		return -EINVAL;
 
 	mutex_lock(&ipvs->est_mutex);
@@ -341,7 +341,7 @@ static int ip_vs_est_add_kthread(struct netns_ipvs *ipvs)
 	}
 
 	/* Start kthread tasks only when services are present */
-	if (ipvs->enable && !ip_vs_est_stopped(ipvs)) {
+	if (READ_ONCE(ipvs->enable) && !ip_vs_est_stopped(ipvs)) {
 		ret = ip_vs_est_kthread_start(ipvs, kd);
 		if (ret < 0)
 			goto out;
@@ -484,7 +484,7 @@ int ip_vs_start_estimator(struct netns_ipvs *ipvs, struct ip_vs_stats *stats)
 	struct ip_vs_estimator *est = &stats->est;
 	int ret;
 
-	if (!ipvs->est_max_threads && ipvs->enable)
+	if (!ipvs->est_max_threads && READ_ONCE(ipvs->enable))
 		ipvs->est_max_threads = ip_vs_est_max_threads(ipvs);
 
 	est->ktid = -1;
@@ -661,7 +661,7 @@ static int ip_vs_est_calc_limits(struct netns_ipvs *ipvs, int *chain_max)
 			/* Wait for cpufreq frequency transition */
 			wait_event_idle_timeout(wq, kthread_should_stop(),
 						HZ / 50);
-			if (!ipvs->enable || kthread_should_stop())
+			if (!READ_ONCE(ipvs->enable) || kthread_should_stop())
 				goto stop;
 		}
 
@@ -679,7 +679,7 @@ static int ip_vs_est_calc_limits(struct netns_ipvs *ipvs, int *chain_max)
 		rcu_read_unlock();
 		local_bh_enable();
 
-		if (!ipvs->enable || kthread_should_stop())
+		if (!READ_ONCE(ipvs->enable) || kthread_should_stop())
 			goto stop;
 		cond_resched();
 
@@ -755,7 +755,7 @@ static void ip_vs_est_calc_phase(struct netns_ipvs *ipvs)
 	mutex_lock(&ipvs->est_mutex);
 	for (id = 1; id < ipvs->est_kt_count; id++) {
 		/* netns clean up started, abort */
-		if (!ipvs->enable)
+		if (!READ_ONCE(ipvs->enable))
 			goto unlock2;
 		kd = ipvs->est_kt_arr[id];
 		if (!kd)
@@ -785,7 +785,7 @@ static void ip_vs_est_calc_phase(struct netns_ipvs *ipvs)
 	id = ipvs->est_kt_count;
 
 next_kt:
-	if (!ipvs->enable || kthread_should_stop())
+	if (!READ_ONCE(ipvs->enable) || kthread_should_stop())
 		goto unlock;
 	id--;
 	if (id < 0)
-- 
2.51.0

[PATCH 6.6 111/196] watchdog: mpc8xxx_wdt: Reload the watchdog timer when enabling the watchdog

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christophe Leroy <christophe.leroy@csgroup.eu>

[ Upstream commit 7dfd80f70ef00d871df5af7c391133f7ba61ad9b ]

When the watchdog gets enabled with this driver, it leaves enough time
for the core watchdog subsystem to start pinging it. But when the
watchdog is already started by hardware or by the boot loader, little
time remains before it fires and it happens that the core watchdog
subsystem doesn't have time to start pinging it.

Until commit 19ce9490aa84 ("watchdog: mpc8xxx: use the core worker
function") pinging was managed by the driver itself and the watchdog
was immediately pinged by setting the timer expiry to 0.

So restore similar behaviour by pinging it when enabling it so that
if it was already enabled the watchdog timer counter is reloaded.

Fixes: 19ce9490aa84 ("watchdog: mpc8xxx: use the core worker function")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/watchdog/mpc8xxx_wdt.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/watchdog/mpc8xxx_wdt.c b/drivers/watchdog/mpc8xxx_wdt.c
index 867f9f3113797..a4b497ecfa205 100644
--- a/drivers/watchdog/mpc8xxx_wdt.c
+++ b/drivers/watchdog/mpc8xxx_wdt.c
@@ -100,6 +100,8 @@ static int mpc8xxx_wdt_start(struct watchdog_device *w)
 	ddata->swtc = tmp >> 16;
 	set_bit(WDOG_HW_RUNNING, &ddata->wdd.status);
 
+	mpc8xxx_wdt_keepalive(ddata);
+
 	return 0;
 }
 
-- 
2.51.0

[PATCH 6.6 112/196] drivers/base/node: handle error properly in register_one_node()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Donet Tom <donettom@linux.ibm.com>

[ Upstream commit 786eb990cfb78aab94eb74fb32a030e14723a620 ]

If register_node() returns an error, it is not handled correctly.
The function will proceed further and try to register CPUs under the
node, which is not correct.

So, in this patch, if register_node() returns an error, we return
immediately from the function.

Link: https://lkml.kernel.org/r/20250822084845.19219-1-donettom@linux.ibm.com
Fixes: 76b67ed9dce6 ("[PATCH] node hotplug: register cpu: remove node struct")
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Donet Tom <donettom@linux.ibm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hiroyouki Kamezawa <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Joanthan Cameron <Jonathan.Cameron@huawei.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Cc: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/base/node.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/base/node.c b/drivers/base/node.c
index 4d588f4658c85..7b2ff66c119ae 100644
--- a/drivers/base/node.c
+++ b/drivers/base/node.c
@@ -878,6 +878,11 @@ int __register_one_node(int nid)
 	node_devices[nid] = node;
 
 	error = register_node(node_devices[nid], nid);
+	if (error) {
+		node_devices[nid] = NULL;
+		kfree(node);
+		return error;
+	}
 
 	/* link cpu under this node */
 	for_each_present_cpu(cpu) {
-- 
2.51.0

[PATCH 6.6 113/196] RDMA/cm: Rate limit destroy CM ID timeout error message

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Håkon Bugge <haakon.bugge@oracle.com>

[ Upstream commit 2bbe1255fcf19c5eb300efb6cb5ad98d66fdae2e ]

When the destroy CM ID timeout kicks in, you typically get a storm of
them which creates a log flooding. Hence, change pr_err() to
pr_err_ratelimited() in cm_destroy_id_wait_timeout().

Fixes: 96d9cbe2f2ff ("RDMA/cm: add timeout to cm_destroy_id wait")
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Link: https://patch.msgid.link/20250912100525.531102-1-haakon.bugge@oracle.com
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/core/cm.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c
index d45e3909dafe1..50bb3c43f40bf 100644
--- a/drivers/infiniband/core/cm.c
+++ b/drivers/infiniband/core/cm.c
@@ -1032,8 +1032,8 @@ static noinline void cm_destroy_id_wait_timeout(struct ib_cm_id *cm_id,
 	struct cm_id_private *cm_id_priv;
 
 	cm_id_priv = container_of(cm_id, struct cm_id_private, id);
-	pr_err("%s: cm_id=%p timed out. state %d -> %d, refcnt=%d\n", __func__,
-	       cm_id, old_state, cm_id->state, refcount_read(&cm_id_priv->refcount));
+	pr_err_ratelimited("%s: cm_id=%p timed out. state %d -> %d, refcnt=%d\n", __func__,
+			   cm_id, old_state, cm_id->state, refcount_read(&cm_id_priv->refcount));
 }
 
 static void cm_destroy_id(struct ib_cm_id *cm_id, int err)
-- 
2.51.0

[PATCH 6.6 114/196] wifi: mt76: fix potential memory leak in mt76_wmac_probe()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Abdun Nihaal <abdun.nihaal@gmail.com>

[ Upstream commit 42754b7de2b1a2cf116c5e3f1e8e78392f4ed700 ]

In mt76_wmac_probe(), when the mt76_alloc_device() call succeeds, memory
is allocated for both struct ieee80211_hw and a workqueue. However, on
the error path, the workqueue is not freed. Fix that by calling
mt76_free_device() on the error path.

Fixes: c8846e101502 ("mt76: add driver for MT7603E and MT7628/7688")
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://patch.msgid.link/20250709145532.41246-1-abdun.nihaal@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt7603/soc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7603/soc.c b/drivers/net/wireless/mediatek/mt76/mt7603/soc.c
index ba927033bbe8c..1206769cdc7fd 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7603/soc.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7603/soc.c
@@ -48,7 +48,7 @@ mt76_wmac_probe(struct platform_device *pdev)
 
 	return 0;
 error:
-	ieee80211_free_hw(mt76_hw(dev));
+	mt76_free_device(mdev);
 	return ret;
 }
 
-- 
2.51.0

[PATCH 6.6 115/196] f2fs: fix to update map->m_next_extent correctly in f2fs_map_blocks()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chao Yu <chao@kernel.org>

[ Upstream commit 869833f54e8306326b85ca3ed08979b7ad412a4a ]

Script to reproduce:
mkfs.f2fs -O extra_attr,compression /dev/vdb -f
mount /dev/vdb /mnt/f2fs -o mode=lfs,noextent_cache
cd /mnt/f2fs
f2fs_io write 1 0 1024 rand dsync testfile
xfs_io testfile -c "fsync"
f2fs_io write 1 0 512 rand dsync testfile
xfs_io testfile -c "fsync"
cd /
umount /mnt/f2fs
mount /dev/vdb /mnt/f2fs
f2fs_io precache_extents /mnt/f2fs/testfile
umount /mnt/f2fs

Tracepoint output:
f2fs_update_read_extent_tree_range: dev = (253,16), ino = 4, pgofs = 0, len = 512, blkaddr = 1055744, c_len = 0
f2fs_update_read_extent_tree_range: dev = (253,16), ino = 4, pgofs = 513, len = 351, blkaddr = 17921, c_len = 0
f2fs_update_read_extent_tree_range: dev = (253,16), ino = 4, pgofs = 864, len = 160, blkaddr = 18272, c_len = 0

During precache_extents, there is off-by-one issue, we should update
map->m_next_extent to pgofs rather than pgofs + 1, if last blkaddr is
valid and not contiguous to previous extent.

Fixes: c4020b2da4c9 ("f2fs: support F2FS_IOC_PRECACHE_EXTENTS")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/data.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c
index d37104aa847a7..0e119218ebf74 100644
--- a/fs/f2fs/data.c
+++ b/fs/f2fs/data.c
@@ -1756,7 +1756,7 @@ int f2fs_map_blocks(struct inode *inode, struct f2fs_map_blocks *map, int flag)
 				map->m_len - ofs);
 		}
 		if (map->m_next_extent)
-			*map->m_next_extent = pgofs + 1;
+			*map->m_next_extent = is_hole ? pgofs + 1 : pgofs;
 	}
 	f2fs_put_dnode(&dn);
 unlock_out:
-- 
2.51.0

[PATCH 6.6 116/196] f2fs: fix to truncate first page in error path of f2fs_truncate()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chao Yu <chao@kernel.org>

[ Upstream commit 9251a9e6e871cb03c4714a18efa8f5d4a8818450 ]

syzbot reports a bug as below:

loop0: detected capacity change from 0 to 40427
F2FS-fs (loop0): Wrong SSA boundary, start(3584) end(4096) blocks(3072)
F2FS-fs (loop0): Can't find valid F2FS filesystem in 1th superblock
F2FS-fs (loop0): invalid crc value
F2FS-fs (loop0): f2fs_convert_inline_folio: corrupted inline inode ino=3, i_addr[0]:0x1601, run fsck to fix.
------------[ cut here ]------------
kernel BUG at fs/inode.c:753!
RIP: 0010:clear_inode+0x169/0x190 fs/inode.c:753
Call Trace:
 <TASK>
 evict+0x504/0x9c0 fs/inode.c:810
 f2fs_fill_super+0x5612/0x6fa0 fs/f2fs/super.c:5047
 get_tree_bdev_flags+0x40e/0x4d0 fs/super.c:1692
 vfs_get_tree+0x8f/0x2b0 fs/super.c:1815
 do_new_mount+0x2a2/0x9e0 fs/namespace.c:3808
 do_mount fs/namespace.c:4136 [inline]
 __do_sys_mount fs/namespace.c:4347 [inline]
 __se_sys_mount+0x317/0x410 fs/namespace.c:4324
 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
 do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
 entry_SYSCALL_64_after_hwframe+0x77/0x7f

During f2fs_evict_inode(), clear_inode() detects that we missed to truncate
all page cache before destorying inode, that is because in below path, we
will create page #0 in cache, but missed to drop it in error path, let's fix
it.

- evict
 - f2fs_evict_inode
  - f2fs_truncate
   - f2fs_convert_inline_inode
    - f2fs_grab_cache_folio
    : create page #0 in cache
    - f2fs_convert_inline_folio
    : sanity check failed, return -EFSCORRUPTED
  - clear_inode detects that inode->i_data.nrpages is not zero

Fixes: 92dffd01790a ("f2fs: convert inline_data when i_size becomes large")
Reported-by: syzbot+90266696fe5daacebd35@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-f2fs-devel/68c09802.050a0220.3c6139.000e.GAE@google.com
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/file.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c
index 031015823acb2..20d102009f715 100644
--- a/fs/f2fs/file.c
+++ b/fs/f2fs/file.c
@@ -844,8 +844,16 @@ int f2fs_truncate(struct inode *inode)
 	/* we should check inline_data size */
 	if (!f2fs_may_inline_data(inode)) {
 		err = f2fs_convert_inline_inode(inode);
-		if (err)
+		if (err) {
+			/*
+			 * Always truncate page #0 to avoid page cache
+			 * leak in evict() path.
+			 */
+			truncate_inode_pages_range(inode->i_mapping,
+					F2FS_BLK_TO_BYTES(0),
+					F2FS_BLK_END_BYTES(0));
 			return err;
+		}
 	}
 
 	err = f2fs_truncate_blocks(inode, i_size_read(inode), true);
-- 
2.51.0

[PATCH 6.6 117/196] f2fs: fix to mitigate overhead of f2fs_zero_post_eof_page()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chao Yu <chao@kernel.org>

[ Upstream commit c2f7c32b254006ad48f8e4efb2e7e7bf71739f17 ]

f2fs_zero_post_eof_page() may cuase more overhead due to invalidate_lock
and page lookup, change as below to mitigate its overhead:
- check new_size before grabbing invalidate_lock
- lookup and invalidate pages only in range of [old_size, new_size]

Fixes: ba8dac350faf ("f2fs: fix to zero post-eof page")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/file.c | 39 +++++++++++++++++++--------------------
 1 file changed, 19 insertions(+), 20 deletions(-)

diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c
index 20d102009f715..6267ba6ef1083 100644
--- a/fs/f2fs/file.c
+++ b/fs/f2fs/file.c
@@ -36,15 +36,23 @@
 #include <trace/events/f2fs.h>
 #include <uapi/linux/f2fs.h>
 
-static void f2fs_zero_post_eof_page(struct inode *inode, loff_t new_size)
+static void f2fs_zero_post_eof_page(struct inode *inode,
+					loff_t new_size, bool lock)
 {
 	loff_t old_size = i_size_read(inode);
 
 	if (old_size >= new_size)
 		return;
 
+	if (mapping_empty(inode->i_mapping))
+		return;
+
+	if (lock)
+		filemap_invalidate_lock(inode->i_mapping);
 	/* zero or drop pages only in range of [old_size, new_size] */
-	truncate_pagecache(inode, old_size);
+	truncate_inode_pages_range(inode->i_mapping, old_size, new_size);
+	if (lock)
+		filemap_invalidate_unlock(inode->i_mapping);
 }
 
 static vm_fault_t f2fs_filemap_fault(struct vm_fault *vmf)
@@ -115,9 +123,7 @@ static vm_fault_t f2fs_vm_page_mkwrite(struct vm_fault *vmf)
 
 	f2fs_bug_on(sbi, f2fs_has_inline_data(inode));
 
-	filemap_invalidate_lock(inode->i_mapping);
-	f2fs_zero_post_eof_page(inode, (folio->index + 1) << PAGE_SHIFT);
-	filemap_invalidate_unlock(inode->i_mapping);
+	f2fs_zero_post_eof_page(inode, (folio->index + 1) << PAGE_SHIFT, true);
 
 	file_update_time(vmf->vma->vm_file);
 	filemap_invalidate_lock_shared(inode->i_mapping);
@@ -1077,7 +1083,7 @@ int f2fs_setattr(struct mnt_idmap *idmap, struct dentry *dentry,
 		filemap_invalidate_lock(inode->i_mapping);
 
 		if (attr->ia_size > old_size)
-			f2fs_zero_post_eof_page(inode, attr->ia_size);
+			f2fs_zero_post_eof_page(inode, attr->ia_size, false);
 		truncate_setsize(inode, attr->ia_size);
 
 		if (attr->ia_size <= old_size)
@@ -1196,9 +1202,7 @@ static int f2fs_punch_hole(struct inode *inode, loff_t offset, loff_t len)
 	if (ret)
 		return ret;
 
-	filemap_invalidate_lock(inode->i_mapping);
-	f2fs_zero_post_eof_page(inode, offset + len);
-	filemap_invalidate_unlock(inode->i_mapping);
+	f2fs_zero_post_eof_page(inode, offset + len, true);
 
 	pg_start = ((unsigned long long) offset) >> PAGE_SHIFT;
 	pg_end = ((unsigned long long) offset + len) >> PAGE_SHIFT;
@@ -1484,7 +1488,7 @@ static int f2fs_do_collapse(struct inode *inode, loff_t offset, loff_t len)
 	f2fs_down_write(&F2FS_I(inode)->i_gc_rwsem[WRITE]);
 	filemap_invalidate_lock(inode->i_mapping);
 
-	f2fs_zero_post_eof_page(inode, offset + len);
+	f2fs_zero_post_eof_page(inode, offset + len, false);
 
 	f2fs_lock_op(sbi);
 	f2fs_drop_extent_tree(inode);
@@ -1608,9 +1612,7 @@ static int f2fs_zero_range(struct inode *inode, loff_t offset, loff_t len,
 	if (ret)
 		return ret;
 
-	filemap_invalidate_lock(mapping);
-	f2fs_zero_post_eof_page(inode, offset + len);
-	filemap_invalidate_unlock(mapping);
+	f2fs_zero_post_eof_page(inode, offset + len, true);
 
 	pg_start = ((unsigned long long) offset) >> PAGE_SHIFT;
 	pg_end = ((unsigned long long) offset + len) >> PAGE_SHIFT;
@@ -1744,7 +1746,7 @@ static int f2fs_insert_range(struct inode *inode, loff_t offset, loff_t len)
 	f2fs_down_write(&F2FS_I(inode)->i_gc_rwsem[WRITE]);
 	filemap_invalidate_lock(mapping);
 
-	f2fs_zero_post_eof_page(inode, offset + len);
+	f2fs_zero_post_eof_page(inode, offset + len, false);
 	truncate_pagecache(inode, offset);
 
 	while (!ret && idx > pg_start) {
@@ -1800,9 +1802,7 @@ static int f2fs_expand_inode_data(struct inode *inode, loff_t offset,
 	if (err)
 		return err;
 
-	filemap_invalidate_lock(inode->i_mapping);
-	f2fs_zero_post_eof_page(inode, offset + len);
-	filemap_invalidate_unlock(inode->i_mapping);
+	f2fs_zero_post_eof_page(inode, offset + len, true);
 
 	f2fs_balance_fs(sbi, true);
 
@@ -4718,9 +4718,8 @@ static ssize_t f2fs_write_checks(struct kiocb *iocb, struct iov_iter *from)
 	if (err)
 		return err;
 
-	filemap_invalidate_lock(inode->i_mapping);
-	f2fs_zero_post_eof_page(inode, iocb->ki_pos + iov_iter_count(from));
-	filemap_invalidate_unlock(inode->i_mapping);
+	f2fs_zero_post_eof_page(inode,
+		iocb->ki_pos + iov_iter_count(from), true);
 	return count;
 }
 
-- 
2.51.0

[PATCH 6.6 118/196] ACPI: NFIT: Fix incorrect ndr_desc being reportedin dev_err message

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Colin Ian King <colin.i.king@gmail.com>

[ Upstream commit d1a599a8136b16522b5afebd122395524496d549 ]

There appears to be a cut-n-paste error with the incorrect field
ndr_desc->numa_node being reported for the target node. Fix this by
using ndr_desc->target_node instead.

Fixes: f060db99374e ("ACPI: NFIT: Use fallback node id when numa info in NFIT table is incorrect")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/nfit/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/acpi/nfit/core.c b/drivers/acpi/nfit/core.c
index a466ad6e5d93a..5a1ced5bf7f6f 100644
--- a/drivers/acpi/nfit/core.c
+++ b/drivers/acpi/nfit/core.c
@@ -2643,7 +2643,7 @@ static int acpi_nfit_register_region(struct acpi_nfit_desc *acpi_desc,
 	if (ndr_desc->target_node == NUMA_NO_NODE) {
 		ndr_desc->target_node = phys_to_target_node(spa->address);
 		dev_info(acpi_desc->dev, "changing target node from %d to %d for nfit region [%pa-%pa]",
-			NUMA_NO_NODE, ndr_desc->numa_node, &res.start, &res.end);
+			NUMA_NO_NODE, ndr_desc->target_node, &res.start, &res.end);
 	}
 
 	/*
-- 
2.51.0

[PATCH 6.6 119/196] scsi: qla2xxx: edif: Fix incorrect sign of error code

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Qianfeng Rong <rongqianfeng@vivo.com>

[ Upstream commit 066b8f3fa85c1be7fb7dbae202231e131d38f7bc ]

Change the error code EAGAIN to -EAGAIN in qla24xx_sadb_update() and
qla_edif_process_els() to align with qla2x00_start_sp() returning
negative error codes or QLA_SUCCESS, preventing logical errors.

Fixes: 0b3f3143d473 ("scsi: qla2xxx: edif: Add retry for ELS passthrough")
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Message-ID: <20250905075446.381139-2-rongqianfeng@vivo.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_edif.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_edif.c b/drivers/scsi/qla2xxx/qla_edif.c
index dcde55c8ee5de..be20e2c457b8e 100644
--- a/drivers/scsi/qla2xxx/qla_edif.c
+++ b/drivers/scsi/qla2xxx/qla_edif.c
@@ -1797,7 +1797,7 @@ qla24xx_sadb_update(struct bsg_job *bsg_job)
 	switch (rval) {
 	case QLA_SUCCESS:
 		break;
-	case EAGAIN:
+	case -EAGAIN:
 		msleep(EDIF_MSLEEP_INTERVAL);
 		cnt++;
 		if (cnt < EDIF_RETRY_COUNT)
@@ -3648,7 +3648,7 @@ int qla_edif_process_els(scsi_qla_host_t *vha, struct bsg_job *bsg_job)
 		       p->e.extra_rx_xchg_address, p->e.extra_control_flags,
 		       sp->handle, sp->remap.req.len, bsg_job);
 		break;
-	case EAGAIN:
+	case -EAGAIN:
 		msleep(EDIF_MSLEEP_INTERVAL);
 		cnt++;
 		if (cnt < EDIF_RETRY_COUNT)
-- 
2.51.0

[PATCH 6.6 120/196] scsi: qla2xxx: Fix incorrect sign of error code in START_SP_W_RETRIES()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Qianfeng Rong <rongqianfeng@vivo.com>

[ Upstream commit 1f037e3acda79639a78f096355f2c308a3d45492 ]

Change the error code EAGAIN to -EAGAIN in START_SP_W_RETRIES() to align
with qla2x00_start_sp() returning negative error codes or QLA_SUCCESS,
preventing logical errors.  Additionally, the '_rval' variable should
store negative error codes to conform to Linux kernel error code
conventions.

Fixes: 9803fb5d2759 ("scsi: qla2xxx: Fix task management cmd failure")
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Message-ID: <20250905075446.381139-3-rongqianfeng@vivo.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_init.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 5fa2727c1bea7..e881d704b45d1 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -2059,11 +2059,11 @@ static void qla_marker_sp_done(srb_t *sp, int res)
 	int cnt = 5; \
 	do { \
 		if (_chip_gen != sp->vha->hw->chip_reset || _login_gen != sp->fcport->login_gen) {\
-			_rval = EINVAL; \
+			_rval = -EINVAL; \
 			break; \
 		} \
 		_rval = qla2x00_start_sp(_sp); \
-		if (_rval == EAGAIN) \
+		if (_rval == -EAGAIN) \
 			msleep(1); \
 		else \
 			break; \
-- 
2.51.0

[PATCH 6.6 121/196] scsi: qla2xxx: Fix incorrect sign of error code in qla_nvme_xmt_ls_rsp()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Qianfeng Rong <rongqianfeng@vivo.com>

[ Upstream commit 9877c004e9f4d10e7786ac80a50321705d76e036 ]

Change the error code EAGAIN to -EAGAIN in qla_nvme_xmt_ls_rsp() to
align with qla2x00_start_sp() returning negative error codes or
QLA_SUCCESS, preventing logical errors.

Fixes: 875386b98857 ("scsi: qla2xxx: Add Unsolicited LS Request and Response Support for NVMe")
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Message-ID: <20250905075446.381139-4-rongqianfeng@vivo.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_nvme.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/qla2xxx/qla_nvme.c b/drivers/scsi/qla2xxx/qla_nvme.c
index 8f4cc136a9c9c..080670cb2aa51 100644
--- a/drivers/scsi/qla2xxx/qla_nvme.c
+++ b/drivers/scsi/qla2xxx/qla_nvme.c
@@ -420,7 +420,7 @@ static int qla_nvme_xmt_ls_rsp(struct nvme_fc_local_port *lport,
 	switch (rval) {
 	case QLA_SUCCESS:
 		break;
-	case EAGAIN:
+	case -EAGAIN:
 		msleep(PURLS_MSLEEP_INTERVAL);
 		cnt++;
 		if (cnt < PURLS_RETRY_COUNT)
-- 
2.51.0

[PATCH 6.6 122/196] f2fs: fix zero-sized extent for precache extents

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: wangzijie <wangzijie1@honor.com>

[ Upstream commit 8175c864391753b210f3dcfae1aeed686a226ebb ]

Script to reproduce:
f2fs_io write 1 0 1881 rand dsync testfile
f2fs_io fallocate 0 7708672 4096 testfile
f2fs_io write 1 1881 1 rand buffered testfile
fsync testfile
umount
mount
f2fs_io precache_extents testfile

When the data layout is something like this:
dnode1:                     dnode2:
[0]      A                  [0]    NEW_ADDR
[1]      A+1                [1]    0x0
...
[1016]   A+1016
[1017]   B (B!=A+1017)      [1017] 0x0

During precache_extents, we map the last block(valid blkaddr) in dnode1:
map->m_flags |= F2FS_MAP_MAPPED;
map->m_pblk = blkaddr(valid blkaddr);
map->m_len = 1;
then we goto next_dnode, meet the first block in dnode2(hole), goto sync_out:
map->m_flags & F2FS_MAP_MAPPED == true, and we make zero-sized extent:

map->m_len = 1
ofs = start_pgofs - map->m_lblk = 1882 - 1881 = 1
ei.fofs = start_pgofs = 1882
ei.len = map->m_len - ofs = 1 - 1 = 0

Rebased on patch[1], this patch can cover these cases to avoid zero-sized extent:
A,B,C is valid blkaddr
case1:
dnode1:                     dnode2:
[0]      A                  [0]    NEW_ADDR
[1]      A+1                [1]    0x0
...                         ....
[1016]   A+1016
[1017]   B (B!=A+1017)      [1017] 0x0

case2:
dnode1:                     dnode2:
[0]      A                  [0]    C (C!=B+1)
[1]      A+1                [1]    C+1
...                         ....
[1016]   A+1016
[1017]   B (B!=A+1017)      [1017] 0x0

case3:
dnode1:                     dnode2:
[0]      A                  [0]    C (C!=B+2)
[1]      A+1                [1]    C+1
...                         ....
[1015]   A+1015
[1016]   B (B!=A+1016)
[1017]   B+1                [1017] 0x0

[1] https://lore.kernel.org/linux-f2fs-devel/20250912081250.44383-1-chao@kernel.org/

Fixes: c4020b2da4c9 ("f2fs: support F2FS_IOC_PRECACHE_EXTENTS")
Signed-off-by: wangzijie <wangzijie1@honor.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/data.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c
index 0e119218ebf74..fe23ebfc88ea1 100644
--- a/fs/f2fs/data.c
+++ b/fs/f2fs/data.c
@@ -1751,9 +1751,10 @@ int f2fs_map_blocks(struct inode *inode, struct f2fs_map_blocks *map, int flag)
 		if (map->m_flags & F2FS_MAP_MAPPED) {
 			unsigned int ofs = start_pgofs - map->m_lblk;
 
-			f2fs_update_read_extent_cache_range(&dn,
-				start_pgofs, map->m_pblk + ofs,
-				map->m_len - ofs);
+			if (map->m_len > ofs)
+				f2fs_update_read_extent_cache_range(&dn,
+					start_pgofs, map->m_pblk + ofs,
+					map->m_len - ofs);
 		}
 		if (map->m_next_extent)
 			*map->m_next_extent = is_hole ? pgofs + 1 : pgofs;
-- 
2.51.0

[PATCH 6.6 123/196] Revert "usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running"

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michal Pecio <michal.pecio@gmail.com>

[ Upstream commit 08fa726e66039dfa80226dfa112931f60ad4c898 ]

This reverts commit 28a76fcc4c85dd39633fb96edb643c91820133e3.

No actual HW bugs are known where Endpoint Context shows Running state
but Stop Endpoint fails repeatedly with Context State Error and leaves
the endpoint state unchanged. Stop Endpoint retries on Running EPs have
been performed since early 2021 with no such issues reported so far.

Trying to handle this hypothetical case brings a more realistic danger:
if Stop Endpoint fails on an endpoint which hasn't yet started after a
doorbell ring and enough latency occurs before this completion event is
handled, the driver may time out and begin removing cancelled TDs from
a running endpoint, even though one more retry would stop it reliably.

Such high latency is rare but not impossible, and removing TDs from a
running endpoint can cause more damage than not giving back a cancelled
URB (which wasn't happening anyway). So err on the side of caution and
revert to the old policy of always retrying if the EP appears running.

[Remove stable tag as we are dealing with theoretical cases -Mathias]

Fixes: 28a76fcc4c85d ("usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running")
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250917210726.97100-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/host/xhci-ring.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index a21ac9d80275f..6443e11eaac04 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1224,19 +1224,16 @@ static void xhci_handle_cmd_stop_ep(struct xhci_hcd *xhci, int slot_id,
 			 * Stopped state, but it will soon change to Running.
 			 *
 			 * Assume this bug on unexpected Stop Endpoint failures.
-			 * Keep retrying until the EP starts and stops again.
+			 * Keep retrying until the EP starts and stops again, on
+			 * chips where this is known to help. Wait for 100ms.
 			 */
+			if (time_is_before_jiffies(ep->stop_time + msecs_to_jiffies(100)))
+				break;
 			fallthrough;
 		case EP_STATE_RUNNING:
 			/* Race, HW handled stop ep cmd before ep was running */
 			xhci_dbg(xhci, "Stop ep completion ctx error, ctx_state %d\n",
 					GET_EP_CTX_STATE(ep_ctx));
-			/*
-			 * Don't retry forever if we guessed wrong or a defective HC never starts
-			 * the EP or says 'Running' but fails the command. We must give back TDs.
-			 */
-			if (time_is_before_jiffies(ep->stop_time + msecs_to_jiffies(100)))
-				break;
 
 			command = xhci_alloc_command(xhci, false, GFP_ATOMIC);
 			if (!command) {
-- 
2.51.0

[PATCH 6.6 124/196] RDMA/core: Resolve MAC of next-hop device without ARP support

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Parav Pandit <parav@nvidia.com>

[ Upstream commit 200651b9b8aadfbbec852f0e5d042d9abe75e2ab ]

Currently, if the next-hop netdevice does not support ARP resolution,
the destination MAC address is silently set to zero without reporting
an error. This leads to incorrect behavior and may result in packet
transmission failures.

Fix this by deferring MAC resolution to the IP stack via neighbour
lookup, allowing proper resolution or error reporting as appropriate.

Fixes: 7025fcd36bd6 ("IB: address translation to map IP toIB addresses (GIDs)")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Vlad Dumitrescu <vdumitrescu@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20250916111103.84069-3-edwards@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/core/addr.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/drivers/infiniband/core/addr.c b/drivers/infiniband/core/addr.c
index f20dfe70fa0e4..8bf705921618c 100644
--- a/drivers/infiniband/core/addr.c
+++ b/drivers/infiniband/core/addr.c
@@ -460,14 +460,10 @@ static int addr_resolve_neigh(const struct dst_entry *dst,
 {
 	int ret = 0;
 
-	if (ndev_flags & IFF_LOOPBACK) {
+	if (ndev_flags & IFF_LOOPBACK)
 		memcpy(addr->dst_dev_addr, addr->src_dev_addr, MAX_ADDR_LEN);
-	} else {
-		if (!(ndev_flags & IFF_NOARP)) {
-			/* If the device doesn't do ARP internally */
-			ret = fetch_ha(dst, addr, dst_in, seq);
-		}
-	}
+	else
+		ret = fetch_ha(dst, addr, dst_in, seq);
 	return ret;
 }
 
-- 
2.51.0

[PATCH 6.6 125/196] IB/sa: Fix sa_local_svc_timeout_ms read race

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vlad Dumitrescu <vdumitrescu@nvidia.com>

[ Upstream commit 1428cd764cd708d53a072a2f208d87014bfe05bc ]

When computing the delta, the sa_local_svc_timeout_ms is read without
ib_nl_request_lock held. Though unlikely in practice, this can cause
a race condition if multiple local service threads are managing the
timeout.

Fixes: 2ca546b92a02 ("IB/sa: Route SA pathrecord query through netlink")
Signed-off-by: Vlad Dumitrescu <vdumitrescu@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20250916163112.98414-1-edwards@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/core/sa_query.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/infiniband/core/sa_query.c b/drivers/infiniband/core/sa_query.c
index 8175dde60b0a8..9902bb96c7409 100644
--- a/drivers/infiniband/core/sa_query.c
+++ b/drivers/infiniband/core/sa_query.c
@@ -1013,6 +1013,8 @@ int ib_nl_handle_set_timeout(struct sk_buff *skb,
 	if (timeout > IB_SA_LOCAL_SVC_TIMEOUT_MAX)
 		timeout = IB_SA_LOCAL_SVC_TIMEOUT_MAX;
 
+	spin_lock_irqsave(&ib_nl_request_lock, flags);
+
 	delta = timeout - sa_local_svc_timeout_ms;
 	if (delta < 0)
 		abs_delta = -delta;
@@ -1020,7 +1022,6 @@ int ib_nl_handle_set_timeout(struct sk_buff *skb,
 		abs_delta = delta;
 
 	if (delta != 0) {
-		spin_lock_irqsave(&ib_nl_request_lock, flags);
 		sa_local_svc_timeout_ms = timeout;
 		list_for_each_entry(query, &ib_nl_request_list, list) {
 			if (delta < 0 && abs_delta > query->timeout)
@@ -1038,9 +1039,10 @@ int ib_nl_handle_set_timeout(struct sk_buff *skb,
 		if (delay)
 			mod_delayed_work(ib_nl_wq, &ib_nl_timed_work,
 					 (unsigned long)delay);
-		spin_unlock_irqrestore(&ib_nl_request_lock, flags);
 	}
 
+	spin_unlock_irqrestore(&ib_nl_request_lock, flags);
+
 settimeout_out:
 	return 0;
 }
-- 
2.51.0

[PATCH 6.6 126/196] Documentation: trace: historgram-design: Separate sched_waking histogram section heading and the following diagram

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bagas Sanjaya <bagasdotme@gmail.com>

[ Upstream commit 8c716e87ea33519920811338100d6d8a7fb32456 ]

Section heading for sched_waking histogram is shown as normal paragraph
instead due to codeblock marker for the following diagram being in the
same line as the section underline. Separate them.

Fixes: daceabf1b494 ("tracing/doc: Fix ascii-art in histogram-design.rst")
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20250916054202.582074-5-bagasdotme@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/trace/histogram-design.rst | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/trace/histogram-design.rst b/Documentation/trace/histogram-design.rst
index 5765eb3e9efa7..a30f4bed11b4e 100644
--- a/Documentation/trace/histogram-design.rst
+++ b/Documentation/trace/histogram-design.rst
@@ -380,7 +380,9 @@ entry, ts0, corresponding to the ts0 variable in the sched_waking
 trigger above.
 
 sched_waking histogram
-----------------------::
+----------------------
+
+.. code-block::
 
   +------------------+
   | hist_data        |<-------------------------------------------------------+
-- 
2.51.0

[PATCH 6.6 127/196] wifi: ath10k: avoid unnecessary wait for service ready message

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Baochen Qiang <baochen.qiang@oss.qualcomm.com>

[ Upstream commit 51a73f1b2e56b0324b4a3bb8cebc4221b5be4c7a ]

Commit e57b7d62a1b2 ("wifi: ath10k: poll service ready message before
failing") works around the failure in waiting for the service ready
message by active polling. Note the polling is triggered after initial
wait timeout, which means that the wait-till-timeout can not be avoided
even the message is ready.

A possible fix is to do polling once before wait as well, however this
can not handle the race that the message arrives right after polling.
So the solution is to do periodic polling until timeout.

Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00309-QCARMSWPZ-1

Fixes: e57b7d62a1b2 ("wifi: ath10k: poll service ready message before failing")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://lore.kernel.org/all/97a15967-5518-4731-a8ff-d43ff7f437b0@molgen.mpg.de
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250811-ath10k-avoid-unnecessary-wait-v1-1-db2deb87c39b@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/wmi.c | 39 +++++++++++++--------------
 1 file changed, 19 insertions(+), 20 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 818aea99f85eb..340502c47a10d 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -1763,33 +1763,32 @@ void ath10k_wmi_put_wmi_channel(struct ath10k *ar, struct wmi_channel *ch,
 
 int ath10k_wmi_wait_for_service_ready(struct ath10k *ar)
 {
+	unsigned long timeout = jiffies + WMI_SERVICE_READY_TIMEOUT_HZ;
 	unsigned long time_left, i;
 
-	time_left = wait_for_completion_timeout(&ar->wmi.service_ready,
-						WMI_SERVICE_READY_TIMEOUT_HZ);
-	if (!time_left) {
-		/* Sometimes the PCI HIF doesn't receive interrupt
-		 * for the service ready message even if the buffer
-		 * was completed. PCIe sniffer shows that it's
-		 * because the corresponding CE ring doesn't fires
-		 * it. Workaround here by polling CE rings once.
-		 */
-		ath10k_warn(ar, "failed to receive service ready completion, polling..\n");
-
+	/* Sometimes the PCI HIF doesn't receive interrupt
+	 * for the service ready message even if the buffer
+	 * was completed. PCIe sniffer shows that it's
+	 * because the corresponding CE ring doesn't fires
+	 * it. Workaround here by polling CE rings. Since
+	 * the message could arrive at any time, continue
+	 * polling until timeout.
+	 */
+	do {
 		for (i = 0; i < CE_COUNT; i++)
 			ath10k_hif_send_complete_check(ar, i, 1);
 
+		/* The 100 ms granularity is a tradeoff considering scheduler
+		 * overhead and response latency
+		 */
 		time_left = wait_for_completion_timeout(&ar->wmi.service_ready,
-							WMI_SERVICE_READY_TIMEOUT_HZ);
-		if (!time_left) {
-			ath10k_warn(ar, "polling timed out\n");
-			return -ETIMEDOUT;
-		}
-
-		ath10k_warn(ar, "service ready completion received, continuing normally\n");
-	}
+							msecs_to_jiffies(100));
+		if (time_left)
+			return 0;
+	} while (time_before(jiffies, timeout));
 
-	return 0;
+	ath10k_warn(ar, "failed to receive service ready completion\n");
+	return -ETIMEDOUT;
 }
 
 int ath10k_wmi_wait_for_unified_ready(struct ath10k *ar)
-- 
2.51.0

[PATCH 6.6 128/196] wifi: mac80211: fix Rx packet handling when pubsta information is not available

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>

[ Upstream commit 32d340ae675800672e1219444a17940a8efe5cca ]

In ieee80211_rx_handle_packet(), if the caller does not provide pubsta
information, an attempt is made to find the station using the address 2
(source address) field in the header. Since pubsta is missing, link
information such as link_valid and link_id is also unavailable. Now if such
a situation comes, and if a matching ML station entry is found based on
the source address, currently the packet is dropped due to missing link ID
in the status field which is not correct.

Hence, to fix this issue, if link_valid is not set and the station is an
ML station, make an attempt to find a link station entry using the source
address. If a valid link station is found, derive the link ID and proceed
with packet processing. Otherwise, drop the packet as per the existing
flow.

Fixes: ea9d807b5642 ("wifi: mac80211: add link information in ieee80211_rx_status")
Suggested-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250917-fix_data_packet_rx_with_mlo_and_no_pubsta-v1-1-8cf971a958ac@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/rx.c | 28 ++++++++++++++++++++++------
 1 file changed, 22 insertions(+), 6 deletions(-)

diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 210337ef23cf5..164c6e8049826 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -5219,12 +5219,20 @@ static void __ieee80211_rx_handle_packet(struct ieee80211_hw *hw,
 			}
 
 			rx.sdata = prev_sta->sdata;
+			if (!status->link_valid && prev_sta->sta.mlo) {
+				struct link_sta_info *link_sta;
+
+				link_sta = link_sta_info_get_bss(rx.sdata,
+								 hdr->addr2);
+				if (!link_sta)
+					continue;
+
+				link_id = link_sta->link_id;
+			}
+
 			if (!ieee80211_rx_data_set_sta(&rx, prev_sta, link_id))
 				goto out;
 
-			if (!status->link_valid && prev_sta->sta.mlo)
-				continue;
-
 			ieee80211_prepare_and_rx_handle(&rx, skb, false);
 
 			prev_sta = sta;
@@ -5232,10 +5240,18 @@ static void __ieee80211_rx_handle_packet(struct ieee80211_hw *hw,
 
 		if (prev_sta) {
 			rx.sdata = prev_sta->sdata;
-			if (!ieee80211_rx_data_set_sta(&rx, prev_sta, link_id))
-				goto out;
+			if (!status->link_valid && prev_sta->sta.mlo) {
+				struct link_sta_info *link_sta;
+
+				link_sta = link_sta_info_get_bss(rx.sdata,
+								 hdr->addr2);
+				if (!link_sta)
+					goto out;
 
-			if (!status->link_valid && prev_sta->sta.mlo)
+				link_id = link_sta->link_id;
+			}
+
+			if (!ieee80211_rx_data_set_sta(&rx, prev_sta, link_id))
 				goto out;
 
 			if (ieee80211_prepare_and_rx_handle(&rx, skb, true))
-- 
2.51.0

[PATCH 6.6 129/196] sparc: fix accurate exception reporting in copy_{from_to}_user for UltraSPARC

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>

[ Upstream commit 4fba1713001195e59cfc001ff1f2837dab877efb ]

The referenced commit introduced exception handlers on user-space memory
references in copy_from_user and copy_to_user. These handlers return from
the respective function and calculate the remaining bytes left to copy
using the current register contents. This commit fixes a couple of bad
calculations. This will fix the return value of copy_from_user and
copy_to_user in the faulting case. The behaviour of memcpy stays unchanged.

Fixes: cb736fdbb208 ("sparc64: Convert U1copy_{from,to}_user to accurate exception reporting.")
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> # on QEMU 10.0.3
Tested-by: René Rebe <rene@exactcode.com> # on Ultra 5 UltraSparc IIi
Tested-by: Jonathan 'theJPster' Pallant <kernel@thejpster.org.uk> # on Sun Netra T1
Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/20250905-memcpy_series-v4-1-1ca72dda195b@mkarcher.dialup.fu-berlin.de
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/sparc/lib/U1memcpy.S | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/arch/sparc/lib/U1memcpy.S b/arch/sparc/lib/U1memcpy.S
index 635398ec7540e..154fbd35400ca 100644
--- a/arch/sparc/lib/U1memcpy.S
+++ b/arch/sparc/lib/U1memcpy.S
@@ -164,17 +164,18 @@ ENTRY(U1_gs_40_fp)
 	retl
 	 add		%o0, %o2, %o0
 ENDPROC(U1_gs_40_fp)
-ENTRY(U1_g3_0_fp)
-	VISExitHalf
-	retl
-	 add		%g3, %o2, %o0
-ENDPROC(U1_g3_0_fp)
 ENTRY(U1_g3_8_fp)
 	VISExitHalf
 	add		%g3, 8, %g3
 	retl
 	 add		%g3, %o2, %o0
 ENDPROC(U1_g3_8_fp)
+ENTRY(U1_g3_16_fp)
+	VISExitHalf
+	add		%g3, 16, %g3
+	retl
+	 add		%g3, %o2, %o0
+ENDPROC(U1_g3_16_fp)
 ENTRY(U1_o2_0_fp)
 	VISExitHalf
 	retl
@@ -547,18 +548,18 @@ FUNC_NAME:		/* %o0=dst, %o1=src, %o2=len */
 62:	FINISH_VISCHUNK(o0, f44, f46)
 63:	UNEVEN_VISCHUNK_LAST(o0, f46, f0)
 
-93:	EX_LD_FP(LOAD(ldd, %o1, %f2), U1_g3_0_fp)
+93:	EX_LD_FP(LOAD(ldd, %o1, %f2), U1_g3_8_fp)
 	add		%o1, 8, %o1
 	subcc		%g3, 8, %g3
 	faligndata	%f0, %f2, %f8
-	EX_ST_FP(STORE(std, %f8, %o0), U1_g3_8_fp)
+	EX_ST_FP(STORE(std, %f8, %o0), U1_g3_16_fp)
 	bl,pn		%xcc, 95f
 	 add		%o0, 8, %o0
-	EX_LD_FP(LOAD(ldd, %o1, %f0), U1_g3_0_fp)
+	EX_LD_FP(LOAD(ldd, %o1, %f0), U1_g3_8_fp)
 	add		%o1, 8, %o1
 	subcc		%g3, 8, %g3
 	faligndata	%f2, %f0, %f8
-	EX_ST_FP(STORE(std, %f8, %o0), U1_g3_8_fp)
+	EX_ST_FP(STORE(std, %f8, %o0), U1_g3_16_fp)
 	bge,pt		%xcc, 93b
 	 add		%o0, 8, %o0
 
-- 
2.51.0

[PATCH 6.6 130/196] sparc: fix accurate exception reporting in copy_{from_to}_user for UltraSPARC III

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>

[ Upstream commit 47b49c06eb62504075f0f2e2227aee2e2c2a58b3 ]

Anthony Yznaga tracked down that a BUG_ON in ext4 code with large folios
enabled resulted from copy_from_user() returning impossibly large values
greater than the size to be copied. This lead to __copy_from_iter()
returning impossible values instead of the actual number of bytes it was
able to copy.

The BUG_ON has been reported in
https://lore.kernel.org/r/b14f55642207e63e907965e209f6323a0df6dcee.camel@physik.fu-berlin.de

The referenced commit introduced exception handlers on user-space memory
references in copy_from_user and copy_to_user. These handlers return from
the respective function and calculate the remaining bytes left to copy
using the current register contents. The exception handlers expect that
%o2 has already been masked during the bulk copy loop, but the masking was
performed after that loop. This will fix the return value of copy_from_user
and copy_to_user in the faulting case. The behaviour of memcpy stays
unchanged.

Fixes: ee841d0aff64 ("sparc64: Convert U3copy_{from,to}_user to accurate exception reporting.")
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> # on Sun Netra 240
Reviewed-by: Anthony Yznaga <anthony.yznaga@oracle.com>
Tested-by: René Rebe <rene@exactcode.com> # on UltraSparc III+ and UltraSparc IIIi
Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/20250905-memcpy_series-v4-2-1ca72dda195b@mkarcher.dialup.fu-berlin.de
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/sparc/lib/U3memcpy.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/sparc/lib/U3memcpy.S b/arch/sparc/lib/U3memcpy.S
index 9248d59c734ce..bace3a18f836f 100644
--- a/arch/sparc/lib/U3memcpy.S
+++ b/arch/sparc/lib/U3memcpy.S
@@ -267,6 +267,7 @@ FUNC_NAME:	/* %o0=dst, %o1=src, %o2=len */
 	faligndata	%f10, %f12, %f26
 	EX_LD_FP(LOAD(ldd, %o1 + 0x040, %f0), U3_retl_o2)
 
+	and		%o2, 0x3f, %o2
 	subcc		GLOBAL_SPARE, 0x80, GLOBAL_SPARE
 	add		%o1, 0x40, %o1
 	bgu,pt		%XCC, 1f
@@ -336,7 +337,6 @@ FUNC_NAME:	/* %o0=dst, %o1=src, %o2=len */
 	 * Also notice how this code is careful not to perform a
 	 * load past the end of the src buffer.
 	 */
-	and		%o2, 0x3f, %o2
 	andcc		%o2, 0x38, %g2
 	be,pn		%XCC, 2f
 	 subcc		%g2, 0x8, %g2
-- 
2.51.0

[PATCH 6.6 131/196] sparc: fix accurate exception reporting in copy_{from_to}_user for Niagara

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>

[ Upstream commit 0b67c8fc10b13a9090340c5f8a37d308f4e1571c ]

The referenced commit introduced exception handlers on user-space memory
references in copy_from_user and copy_to_user. These handlers return from
the respective function and calculate the remaining bytes left to copy
using the current register contents. This commit fixes a couple of bad
calculations and a broken epilogue in the exception handlers. This will
prevent crashes and ensure correct return values of copy_from_user and
copy_to_user in the faulting case. The behaviour of memcpy stays unchanged.

Fixes: 7ae3aaf53f16 ("sparc64: Convert NGcopy_{from,to}_user to accurate exception reporting.")
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> # on SPARC T4 with modified kernel to use Niagara 1 code
Tested-by: Magnus Lindholm <linmag7@gmail.com> # on Sun Fire T2000
Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
Tested-by: Ethan Hawke <ehawk@ember.systems> # on Sun Fire T2000
Tested-by: Ken Link <iissmart@numberzero.org> # on Sun Fire T1000
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/20250905-memcpy_series-v4-3-1ca72dda195b@mkarcher.dialup.fu-berlin.de
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/sparc/lib/NGmemcpy.S | 29 ++++++++++++++++++-----------
 1 file changed, 18 insertions(+), 11 deletions(-)

diff --git a/arch/sparc/lib/NGmemcpy.S b/arch/sparc/lib/NGmemcpy.S
index ee51c12306894..bbd3ea0a64822 100644
--- a/arch/sparc/lib/NGmemcpy.S
+++ b/arch/sparc/lib/NGmemcpy.S
@@ -79,8 +79,8 @@
 #ifndef EX_RETVAL
 #define EX_RETVAL(x)	x
 __restore_asi:
-	ret
 	wr	%g0, ASI_AIUS, %asi
+	ret
 	 restore
 ENTRY(NG_ret_i2_plus_i4_plus_1)
 	ba,pt	%xcc, __restore_asi
@@ -125,15 +125,16 @@ ENTRY(NG_ret_i2_plus_g1_minus_56)
 	ba,pt	%xcc, __restore_asi
 	 add	%i2, %g1, %i0
 ENDPROC(NG_ret_i2_plus_g1_minus_56)
-ENTRY(NG_ret_i2_plus_i4)
+ENTRY(NG_ret_i2_plus_i4_plus_16)
+        add     %i4, 16, %i4
 	ba,pt	%xcc, __restore_asi
 	 add	%i2, %i4, %i0
-ENDPROC(NG_ret_i2_plus_i4)
-ENTRY(NG_ret_i2_plus_i4_minus_8)
-	sub	%i4, 8, %i4
+ENDPROC(NG_ret_i2_plus_i4_plus_16)
+ENTRY(NG_ret_i2_plus_i4_plus_8)
+	add	%i4, 8, %i4
 	ba,pt	%xcc, __restore_asi
 	 add	%i2, %i4, %i0
-ENDPROC(NG_ret_i2_plus_i4_minus_8)
+ENDPROC(NG_ret_i2_plus_i4_plus_8)
 ENTRY(NG_ret_i2_plus_8)
 	ba,pt	%xcc, __restore_asi
 	 add	%i2, 8, %i0
@@ -160,6 +161,12 @@ ENTRY(NG_ret_i2_and_7_plus_i4)
 	ba,pt	%xcc, __restore_asi
 	 add	%i2, %i4, %i0
 ENDPROC(NG_ret_i2_and_7_plus_i4)
+ENTRY(NG_ret_i2_and_7_plus_i4_plus_8)
+	and	%i2, 7, %i2
+	add	%i4, 8, %i4
+	ba,pt	%xcc, __restore_asi
+	 add	%i2, %i4, %i0
+ENDPROC(NG_ret_i2_and_7_plus_i4)
 #endif
 
 	.align		64
@@ -405,13 +412,13 @@ FUNC_NAME:	/* %i0=dst, %i1=src, %i2=len */
 	andn		%i2, 0xf, %i4
 	and		%i2, 0xf, %i2
 1:	subcc		%i4, 0x10, %i4
-	EX_LD(LOAD(ldx, %i1, %o4), NG_ret_i2_plus_i4)
+	EX_LD(LOAD(ldx, %i1, %o4), NG_ret_i2_plus_i4_plus_16)
 	add		%i1, 0x08, %i1
-	EX_LD(LOAD(ldx, %i1, %g1), NG_ret_i2_plus_i4)
+	EX_LD(LOAD(ldx, %i1, %g1), NG_ret_i2_plus_i4_plus_16)
 	sub		%i1, 0x08, %i1
-	EX_ST(STORE(stx, %o4, %i1 + %i3), NG_ret_i2_plus_i4)
+	EX_ST(STORE(stx, %o4, %i1 + %i3), NG_ret_i2_plus_i4_plus_16)
 	add		%i1, 0x8, %i1
-	EX_ST(STORE(stx, %g1, %i1 + %i3), NG_ret_i2_plus_i4_minus_8)
+	EX_ST(STORE(stx, %g1, %i1 + %i3), NG_ret_i2_plus_i4_plus_8)
 	bgu,pt		%XCC, 1b
 	 add		%i1, 0x8, %i1
 73:	andcc		%i2, 0x8, %g0
@@ -468,7 +475,7 @@ FUNC_NAME:	/* %i0=dst, %i1=src, %i2=len */
 	subcc		%i4, 0x8, %i4
 	srlx		%g3, %i3, %i5
 	or		%i5, %g2, %i5
-	EX_ST(STORE(stx, %i5, %o0), NG_ret_i2_and_7_plus_i4)
+	EX_ST(STORE(stx, %i5, %o0), NG_ret_i2_and_7_plus_i4_plus_8)
 	add		%o0, 0x8, %o0
 	bgu,pt		%icc, 1b
 	 sllx		%g3, %g1, %g2
-- 
2.51.0

[PATCH 6.6 132/196] sparc: fix accurate exception reporting in copy_to_user for Niagara 4

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>

[ Upstream commit 5a746c1a2c7980de6c888b6373299f751ad7790b ]

The referenced commit introduced exception handlers on user-space memory
references in copy_from_user and copy_to_user. These handlers return from
the respective function and calculate the remaining bytes left to copy
using the current register contents. This commit fixes a bad calculation.
This will fix the return value of copy_to_user in a specific faulting case.
The behaviour of memcpy stays unchanged.

Fixes: 957077048009 ("sparc64: Convert NG4copy_{from,to}_user to accurate exception reporting.")
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> # on Oracle SPARC T4-1
Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/20250905-memcpy_series-v4-4-1ca72dda195b@mkarcher.dialup.fu-berlin.de
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/sparc/lib/NG4memcpy.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/sparc/lib/NG4memcpy.S b/arch/sparc/lib/NG4memcpy.S
index 7ad58ebe0d009..df0ec1bd19489 100644
--- a/arch/sparc/lib/NG4memcpy.S
+++ b/arch/sparc/lib/NG4memcpy.S
@@ -281,7 +281,7 @@ FUNC_NAME:	/* %o0=dst, %o1=src, %o2=len */
 	subcc		%o5, 0x20, %o5
 	EX_ST(STORE(stx, %g1, %o0 + 0x00), memcpy_retl_o2_plus_o5_plus_32)
 	EX_ST(STORE(stx, %g2, %o0 + 0x08), memcpy_retl_o2_plus_o5_plus_24)
-	EX_ST(STORE(stx, GLOBAL_SPARE, %o0 + 0x10), memcpy_retl_o2_plus_o5_plus_24)
+	EX_ST(STORE(stx, GLOBAL_SPARE, %o0 + 0x10), memcpy_retl_o2_plus_o5_plus_16)
 	EX_ST(STORE(stx, %o4, %o0 + 0x18), memcpy_retl_o2_plus_o5_plus_8)
 	bne,pt		%icc, 1b
 	 add		%o0, 0x20, %o0
-- 
2.51.0

[PATCH 6.6 133/196] sparc: fix accurate exception reporting in copy_{from,to}_user for M7

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>

[ Upstream commit 936fb512752af349fc30ccbe0afe14a2ae6d7159 ]

The referenced commit introduced exception handlers on user-space memory
references in copy_from_user and copy_to_user. These handlers return from
the respective function and calculate the remaining bytes left to copy
using the current register contents. This commit fixes a couple of bad
calculations. This will fix the return value of copy_from_user and
copy_to_user in the faulting case. The behaviour of memcpy stays unchanged.

Fixes: 34060b8fffa7 ("arch/sparc: Add accurate exception reporting in M7memcpy")
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> # on Oracle SPARC S7
Tested-by: Tony Rodriguez <unixpro1970@gmail.com> # S7, see https://lore.kernel.org/r/98564e2e68df2dda0e00c67a75c7f7dfedb33c7e.camel@physik.fu-berlin.de
Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/20250905-memcpy_series-v4-5-1ca72dda195b@mkarcher.dialup.fu-berlin.de
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/sparc/lib/M7memcpy.S     | 20 ++++++++++----------
 arch/sparc/lib/Memcpy_utils.S |  9 +++++++++
 2 files changed, 19 insertions(+), 10 deletions(-)

diff --git a/arch/sparc/lib/M7memcpy.S b/arch/sparc/lib/M7memcpy.S
index cbd42ea7c3f7c..99357bfa8e82a 100644
--- a/arch/sparc/lib/M7memcpy.S
+++ b/arch/sparc/lib/M7memcpy.S
@@ -696,16 +696,16 @@ FUNC_NAME:
 	EX_LD_FP(LOAD(ldd, %o4+40, %f26), memcpy_retl_o2_plus_o5_plus_40)
 	faligndata %f24, %f26, %f10
 	EX_ST_FP(STORE(std, %f6, %o0+24), memcpy_retl_o2_plus_o5_plus_40)
-	EX_LD_FP(LOAD(ldd, %o4+48, %f28), memcpy_retl_o2_plus_o5_plus_40)
+	EX_LD_FP(LOAD(ldd, %o4+48, %f28), memcpy_retl_o2_plus_o5_plus_32)
 	faligndata %f26, %f28, %f12
-	EX_ST_FP(STORE(std, %f8, %o0+32), memcpy_retl_o2_plus_o5_plus_40)
+	EX_ST_FP(STORE(std, %f8, %o0+32), memcpy_retl_o2_plus_o5_plus_32)
 	add	%o4, 64, %o4
-	EX_LD_FP(LOAD(ldd, %o4-8, %f30), memcpy_retl_o2_plus_o5_plus_40)
+	EX_LD_FP(LOAD(ldd, %o4-8, %f30), memcpy_retl_o2_plus_o5_plus_24)
 	faligndata %f28, %f30, %f14
-	EX_ST_FP(STORE(std, %f10, %o0+40), memcpy_retl_o2_plus_o5_plus_40)
-	EX_ST_FP(STORE(std, %f12, %o0+48), memcpy_retl_o2_plus_o5_plus_40)
+	EX_ST_FP(STORE(std, %f10, %o0+40), memcpy_retl_o2_plus_o5_plus_24)
+	EX_ST_FP(STORE(std, %f12, %o0+48), memcpy_retl_o2_plus_o5_plus_16)
 	add	%o0, 64, %o0
-	EX_ST_FP(STORE(std, %f14, %o0-8), memcpy_retl_o2_plus_o5_plus_40)
+	EX_ST_FP(STORE(std, %f14, %o0-8), memcpy_retl_o2_plus_o5_plus_8)
 	fsrc2	%f30, %f14
 	bgu,pt	%xcc, .Lunalign_sloop
 	 prefetch [%o4 + (8 * BLOCK_SIZE)], 20
@@ -728,7 +728,7 @@ FUNC_NAME:
 	add	%o4, 8, %o4
 	faligndata %f0, %f2, %f16
 	subcc	%o5, 8, %o5
-	EX_ST_FP(STORE(std, %f16, %o0), memcpy_retl_o2_plus_o5)
+	EX_ST_FP(STORE(std, %f16, %o0), memcpy_retl_o2_plus_o5_plus_8)
 	fsrc2	%f2, %f0
 	bgu,pt	%xcc, .Lunalign_by8
 	 add	%o0, 8, %o0
@@ -772,7 +772,7 @@ FUNC_NAME:
 	subcc	%o5, 0x20, %o5
 	EX_ST(STORE(stx, %o3, %o0 + 0x00), memcpy_retl_o2_plus_o5_plus_32)
 	EX_ST(STORE(stx, %g2, %o0 + 0x08), memcpy_retl_o2_plus_o5_plus_24)
-	EX_ST(STORE(stx, %g7, %o0 + 0x10), memcpy_retl_o2_plus_o5_plus_24)
+	EX_ST(STORE(stx, %g7, %o0 + 0x10), memcpy_retl_o2_plus_o5_plus_16)
 	EX_ST(STORE(stx, %o4, %o0 + 0x18), memcpy_retl_o2_plus_o5_plus_8)
 	bne,pt	%xcc, 1b
 	 add	%o0, 0x20, %o0
@@ -804,12 +804,12 @@ FUNC_NAME:
 	brz,pt	%o3, 2f
 	 sub	%o2, %o3, %o2
 
-1:	EX_LD(LOAD(ldub, %o1 + 0x00, %g2), memcpy_retl_o2_plus_g1)
+1:	EX_LD(LOAD(ldub, %o1 + 0x00, %g2), memcpy_retl_o2_plus_o3)
 	add	%o1, 1, %o1
 	subcc	%o3, 1, %o3
 	add	%o0, 1, %o0
 	bne,pt	%xcc, 1b
-	 EX_ST(STORE(stb, %g2, %o0 - 0x01), memcpy_retl_o2_plus_g1_plus_1)
+	 EX_ST(STORE(stb, %g2, %o0 - 0x01), memcpy_retl_o2_plus_o3_plus_1)
 2:
 	and	%o1, 0x7, %o3
 	brz,pn	%o3, .Lmedium_noprefetch_cp
diff --git a/arch/sparc/lib/Memcpy_utils.S b/arch/sparc/lib/Memcpy_utils.S
index 64fbac28b3db1..207343367bb2d 100644
--- a/arch/sparc/lib/Memcpy_utils.S
+++ b/arch/sparc/lib/Memcpy_utils.S
@@ -137,6 +137,15 @@ ENTRY(memcpy_retl_o2_plus_63_8)
 	ba,pt	%xcc, __restore_asi
 	 add	%o2, 8, %o0
 ENDPROC(memcpy_retl_o2_plus_63_8)
+ENTRY(memcpy_retl_o2_plus_o3)
+	ba,pt	%xcc, __restore_asi
+	 add	%o2, %o3, %o0
+ENDPROC(memcpy_retl_o2_plus_o3)
+ENTRY(memcpy_retl_o2_plus_o3_plus_1)
+	add	%o3, 1, %o3
+	ba,pt	%xcc, __restore_asi
+	 add	%o2, %o3, %o0
+ENDPROC(memcpy_retl_o2_plus_o3_plus_1)
 ENTRY(memcpy_retl_o2_plus_o5)
 	ba,pt	%xcc, __restore_asi
 	 add	%o2, %o5, %o0
-- 
2.51.0

[PATCH 6.6 134/196] vfio/pds: replace bitmap_free with vfree

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Zilin Guan <zilin@seu.edu.cn>

[ Upstream commit acb59a4bb8ed34e738a4c3463127bf3f6b5e11a9 ]

host_seq_bmp is allocated with vzalloc but is currently freed with
bitmap_free, which uses kfree internally. This mismach prevents the
resource from being released properly and may result in memory leaks
or other issues.

Fix this by freeing host_seq_bmp with vfree to match the vzalloc
allocation.

Fixes: f232836a9152 ("vfio/pds: Add support for dirty page tracking")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Link: https://lore.kernel.org/r/20250913153154.1028835-1-zilin@seu.edu.cn
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vfio/pci/pds/dirty.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/vfio/pci/pds/dirty.c b/drivers/vfio/pci/pds/dirty.c
index 27607d7b9030a..6adc5f1ae2eb9 100644
--- a/drivers/vfio/pci/pds/dirty.c
+++ b/drivers/vfio/pci/pds/dirty.c
@@ -81,7 +81,7 @@ static int pds_vfio_dirty_alloc_bitmaps(struct pds_vfio_dirty *dirty,
 
 	host_ack_bmp = vzalloc(bytes);
 	if (!host_ack_bmp) {
-		bitmap_free(host_seq_bmp);
+		vfree(host_seq_bmp);
 		return -ENOMEM;
 	}
 
-- 
2.51.0

[PATCH 6.6 135/196] crypto: hisilicon/qm - set NULL to qm->debug.qm_diff_regs

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chenghai Huang <huangchenghai2@huawei.com>

[ Upstream commit f0cafb02de883b3b413d34eb079c9680782a9cc1 ]

When the initialization of qm->debug.acc_diff_reg fails,
the probe process does not exit. However, after qm->debug.qm_diff_regs is
freed, it is not set to NULL. This can lead to a double free when the
remove process attempts to free it again. Therefore, qm->debug.qm_diff_regs
should be set to NULL after it is freed.

Fixes: 8be091338971 ("crypto: hisilicon/debugfs - Fix debugfs uninit process issue")
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/hisilicon/debugfs.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/crypto/hisilicon/debugfs.c b/drivers/crypto/hisilicon/debugfs.c
index bd205f1f2279e..573c0033a5afe 100644
--- a/drivers/crypto/hisilicon/debugfs.c
+++ b/drivers/crypto/hisilicon/debugfs.c
@@ -865,6 +865,7 @@ static int qm_diff_regs_init(struct hisi_qm *qm,
 		dfx_regs_uninit(qm, qm->debug.qm_diff_regs, ARRAY_SIZE(qm_diff_regs));
 		ret = PTR_ERR(qm->debug.acc_diff_regs);
 		qm->debug.acc_diff_regs = NULL;
+		qm->debug.qm_diff_regs = NULL;
 		return ret;
 	}
 
-- 
2.51.0

[PATCH 6.6 136/196] RDMA/rxe: Fix race in do_task() when draining

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gui-Dong Han <hanguidong02@gmail.com>

[ Upstream commit 8ca7eada62fcfabf6ec1dc7468941e791c1d8729 ]

When do_task() exhausts its iteration budget (!ret), it sets the state
to TASK_STATE_IDLE to reschedule, without a secondary check on the
current task->state. This can overwrite the TASK_STATE_DRAINING state
set by a concurrent call to rxe_cleanup_task() or rxe_disable_task().

While state changes are protected by a spinlock, both rxe_cleanup_task()
and rxe_disable_task() release the lock while waiting for the task to
finish draining in the while(!is_done(task)) loop. The race occurs if
do_task() hits its iteration limit and acquires the lock in this window.
The cleanup logic may then proceed while the task incorrectly
reschedules itself, leading to a potential use-after-free.

This bug was introduced during the migration from tasklets to workqueues,
where the special handling for the draining case was lost.

Fix this by restoring the original pre-migration behavior. If the state is
TASK_STATE_DRAINING when iterations are exhausted, set cont to 1 to
force a new loop iteration. This allows the task to finish its work, so
that a subsequent iteration can reach the switch statement and correctly
transition the state to TASK_STATE_DRAINED, stopping the task as intended.

Fixes: 9b4b7c1f9f54 ("RDMA/rxe: Add workqueue support for rxe tasks")
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Link: https://patch.msgid.link/20250919025212.1682087-1-hanguidong02@gmail.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/sw/rxe/rxe_task.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/infiniband/sw/rxe/rxe_task.c b/drivers/infiniband/sw/rxe/rxe_task.c
index 80332638d9e3a..be6cd8ce4d97e 100644
--- a/drivers/infiniband/sw/rxe/rxe_task.c
+++ b/drivers/infiniband/sw/rxe/rxe_task.c
@@ -132,8 +132,12 @@ static void do_task(struct rxe_task *task)
 		 * yield the cpu and reschedule the task
 		 */
 		if (!ret) {
-			task->state = TASK_STATE_IDLE;
-			resched = 1;
+			if (task->state != TASK_STATE_DRAINING) {
+				task->state = TASK_STATE_IDLE;
+				resched = 1;
+			} else {
+				cont = 1;
+			}
 			goto exit;
 		}
 
-- 
2.51.0

[PATCH 6.6 137/196] wifi: rtw89: avoid circular locking dependency in ser_state_run()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Fedor Pchelkin <pchelkin@ispras.ru>

[ Upstream commit 570f94511766f9236d3462dfb8a3c719c2b54c23 ]

Lockdep gives a splat [1] when ser_hdl_work item is executed.  It is
scheduled at mac80211 workqueue via ieee80211_queue_work() and takes a
wiphy lock inside.  However, this workqueue can be flushed when e.g.
closing the interface and wiphy lock is already taken in that case.

Choosing wiphy_work_queue() for SER is likely not suitable.  Back on to
the global workqueue.

[1]:

 WARNING: possible circular locking dependency detected
 6.17.0-rc2 #17 Not tainted
 ------------------------------------------------------
 kworker/u32:1/61 is trying to acquire lock:
 ffff88811bc00768 (&rdev->wiphy.mtx){+.+.}-{4:4}, at: ser_state_run+0x5e/0x180 [rtw89_core]

 but task is already holding lock:
 ffffc9000048fd30 ((work_completion)(&ser->ser_hdl_work)){+.+.}-{0:0}, at: process_one_work+0x7b5/0x1450

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #2 ((work_completion)(&ser->ser_hdl_work)){+.+.}-{0:0}:
        process_one_work+0x7c6/0x1450
        worker_thread+0x49e/0xd00
        kthread+0x313/0x640
        ret_from_fork+0x221/0x300
        ret_from_fork_asm+0x1a/0x30

 -> #1 ((wq_completion)phy0){+.+.}-{0:0}:
        touch_wq_lockdep_map+0x8e/0x180
        __flush_workqueue+0x129/0x10d0
        ieee80211_stop_device+0xa8/0x110
        ieee80211_do_stop+0x14ce/0x2880
        ieee80211_stop+0x13a/0x2c0
        __dev_close_many+0x18f/0x510
        __dev_change_flags+0x25f/0x670
        netif_change_flags+0x7b/0x160
        do_setlink.isra.0+0x1640/0x35d0
        rtnl_newlink+0xd8c/0x1d30
        rtnetlink_rcv_msg+0x700/0xb80
        netlink_rcv_skb+0x11d/0x350
        netlink_unicast+0x49a/0x7a0
        netlink_sendmsg+0x759/0xc20
        ____sys_sendmsg+0x812/0xa00
        ___sys_sendmsg+0xf7/0x180
        __sys_sendmsg+0x11f/0x1b0
        do_syscall_64+0xbb/0x360
        entry_SYSCALL_64_after_hwframe+0x77/0x7f

 -> #0 (&rdev->wiphy.mtx){+.+.}-{4:4}:
        __lock_acquire+0x124c/0x1d20
        lock_acquire+0x154/0x2e0
        __mutex_lock+0x17b/0x12f0
        ser_state_run+0x5e/0x180 [rtw89_core]
        rtw89_ser_hdl_work+0x119/0x220 [rtw89_core]
        process_one_work+0x82d/0x1450
        worker_thread+0x49e/0xd00
        kthread+0x313/0x640
        ret_from_fork+0x221/0x300
        ret_from_fork_asm+0x1a/0x30

 other info that might help us debug this:

 Chain exists of:
   &rdev->wiphy.mtx --> (wq_completion)phy0 --> (work_completion)(&ser->ser_hdl_work)

  Possible unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock((work_completion)(&ser->ser_hdl_work));
                                lock((wq_completion)phy0);
                                lock((work_completion)(&ser->ser_hdl_work));
   lock(&rdev->wiphy.mtx);

  *** DEADLOCK ***

 2 locks held by kworker/u32:1/61:
  #0: ffff888103835148 ((wq_completion)phy0){+.+.}-{0:0}, at: process_one_work+0xefa/0x1450
  #1: ffffc9000048fd30 ((work_completion)(&ser->ser_hdl_work)){+.+.}-{0:0}, at: process_one_work+0x7b5/0x1450

 stack backtrace:
 CPU: 0 UID: 0 PID: 61 Comm: kworker/u32:1 Not tainted 6.17.0-rc2 #17 PREEMPT(voluntary)
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS edk2-20250523-14.fc42 05/23/2025
 Workqueue: phy0 rtw89_ser_hdl_work [rtw89_core]
 Call Trace:
  <TASK>
  dump_stack_lvl+0x5d/0x80
  print_circular_bug.cold+0x178/0x1be
  check_noncircular+0x14c/0x170
  __lock_acquire+0x124c/0x1d20
  lock_acquire+0x154/0x2e0
  __mutex_lock+0x17b/0x12f0
  ser_state_run+0x5e/0x180 [rtw89_core]
  rtw89_ser_hdl_work+0x119/0x220 [rtw89_core]
  process_one_work+0x82d/0x1450
  worker_thread+0x49e/0xd00
  kthread+0x313/0x640
  ret_from_fork+0x221/0x300
  ret_from_fork_asm+0x1a/0x30
  </TASK>

Found by Linux Verification Center (linuxtesting.org).

Fixes: ebfc9199df05 ("wifi: rtw89: add wiphy_lock() to work that isn't held wiphy_lock() yet")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250919210852.823912-5-pchelkin@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtw89/ser.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtw89/ser.c b/drivers/net/wireless/realtek/rtw89/ser.c
index 45165cf3e824e..ae3e02efcc5d7 100644
--- a/drivers/net/wireless/realtek/rtw89/ser.c
+++ b/drivers/net/wireless/realtek/rtw89/ser.c
@@ -207,7 +207,6 @@ static void rtw89_ser_hdl_work(struct work_struct *work)
 
 static int ser_send_msg(struct rtw89_ser *ser, u8 event)
 {
-	struct rtw89_dev *rtwdev = container_of(ser, struct rtw89_dev, ser);
 	struct ser_msg *msg = NULL;
 
 	if (test_bit(RTW89_SER_DRV_STOP_RUN, ser->flags))
@@ -223,7 +222,7 @@ static int ser_send_msg(struct rtw89_ser *ser, u8 event)
 	list_add(&msg->list, &ser->msg_q);
 	spin_unlock_irq(&ser->msg_q_lock);
 
-	ieee80211_queue_work(rtwdev->hw, &ser->ser_hdl_work);
+	schedule_work(&ser->ser_hdl_work);
 	return 0;
 }
 
-- 
2.51.0

[PATCH 6.6 138/196] PCI: tegra194: Fix duplicate PLL disable in pex_ep_event_pex_rst_assert()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nagarjuna Kristam <nkristam@nvidia.com>

[ Upstream commit 4f152338e384a3a47dd61909e1457539fa93f5a4 ]

During PERST# assertion tegra_pcie_bpmp_set_pll_state() is currently
called twice.

pex_ep_event_pex_rst_assert() should do the opposite of
pex_ep_event_pex_rst_deassert(), so it is obvious that the duplicate
tegra_pcie_bpmp_set_pll_state() is a mistake, and that the duplicate
tegra_pcie_bpmp_set_pll_state() call should instead be a call to
tegra_pcie_bpmp_set_ctrl_state().

With this, the uninitialization sequence also matches that of
tegra_pcie_unconfig_controller().

Fixes: a54e19073718 ("PCI: tegra194: Add Tegra234 PCIe support")
Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
[cassel: improve commit log]
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20250911093021.1454385-2-cassel@kernel.org
[mani: added Fixes tag]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/dwc/pcie-tegra194.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
index 416d6b45d1fe8..115a21cf869ae 100644
--- a/drivers/pci/controller/dwc/pcie-tegra194.c
+++ b/drivers/pci/controller/dwc/pcie-tegra194.c
@@ -1734,9 +1734,9 @@ static void pex_ep_event_pex_rst_assert(struct tegra_pcie_dw *pcie)
 				ret);
 	}
 
-	ret = tegra_pcie_bpmp_set_pll_state(pcie, false);
+	ret = tegra_pcie_bpmp_set_ctrl_state(pcie, false);
 	if (ret)
-		dev_err(pcie->dev, "Failed to turn off UPHY: %d\n", ret);
+		dev_err(pcie->dev, "Failed to disable controller: %d\n", ret);
 
 	pcie->ep_state = EP_STATE_DISABLED;
 	dev_dbg(pcie->dev, "Uninitialization of endpoint is completed\n");
-- 
2.51.0

[PATCH 6.6 139/196] remoteproc: qcom: q6v5: Avoid disabling handover IRQ twice

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stephan Gerhold <stephan.gerhold@linaro.org>

[ Upstream commit 110be46f5afe27b66caa2d12473a84cd397b1925 ]

enable_irq() and disable_irq() are reference counted, so we must make sure
that each enable_irq() is always paired with a single disable_irq(). If we
call disable_irq() twice followed by just a single enable_irq(), the IRQ
will remain disabled forever.

For the error handling path in qcom_q6v5_wait_for_start(), disable_irq()
will end up being called twice, because disable_irq() also happens in
qcom_q6v5_unprepare() when rolling back the call to qcom_q6v5_prepare().

Fix this by dropping disable_irq() in qcom_q6v5_wait_for_start(). Since
qcom_q6v5_prepare() is the function that calls enable_irq(), it makes more
sense to have the rollback handled always by qcom_q6v5_unprepare().

Fixes: 3b415c8fb263 ("remoteproc: q6v5: Extract common resource handling")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20250820-rproc-qcom-q6v5-fixes-v2-1-910b1a3aff71@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/remoteproc/qcom_q6v5.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/remoteproc/qcom_q6v5.c b/drivers/remoteproc/qcom_q6v5.c
index 4ee5e67a9f03f..769c6d6d6a731 100644
--- a/drivers/remoteproc/qcom_q6v5.c
+++ b/drivers/remoteproc/qcom_q6v5.c
@@ -156,9 +156,6 @@ int qcom_q6v5_wait_for_start(struct qcom_q6v5 *q6v5, int timeout)
 	int ret;
 
 	ret = wait_for_completion_timeout(&q6v5->start_done, timeout);
-	if (!ret)
-		disable_irq(q6v5->handover_irq);
-
 	return !ret ? -ETIMEDOUT : 0;
 }
 EXPORT_SYMBOL_GPL(qcom_q6v5_wait_for_start);
-- 
2.51.0

[PATCH 6.6 140/196] coresight-etm4x: Conditionally access register TRCEXTINSELR

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yuanfang Zhang <yuanfang.zhang@oss.qualcomm.com>

[ Upstream commit dcdc42f5dcf9b9197c51246c62966e2d54a033d8 ]

The TRCEXTINSELR is only implemented if TRCIDR5.NUMEXTINSEL > 0.
To avoid invalid accesses, introduce a check on numextinsel
(derived from TRCIDR5[11:9]) before reading or writing to this register.

Fixes: f5bd523690d2 ("coresight: etm4x: Convert all register accesses")
Signed-off-by: Yuanfang Zhang <yuanfang.zhang@oss.qualcomm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250812-trcextinselr_issue-v2-1-e6eb121dfcf4@oss.qualcomm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwtracing/coresight/coresight-etm4x-core.c | 11 ++++++++---
 drivers/hwtracing/coresight/coresight-etm4x.h      |  2 ++
 2 files changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c
index 05d9f87e35333..625582f7dc34c 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x-core.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c
@@ -481,7 +481,8 @@ static int etm4_enable_hw(struct etmv4_drvdata *drvdata)
 		etm4x_relaxed_write32(csa, config->seq_rst, TRCSEQRSTEVR);
 		etm4x_relaxed_write32(csa, config->seq_state, TRCSEQSTR);
 	}
-	etm4x_relaxed_write32(csa, config->ext_inp, TRCEXTINSELR);
+	if (drvdata->numextinsel)
+		etm4x_relaxed_write32(csa, config->ext_inp, TRCEXTINSELR);
 	for (i = 0; i < drvdata->nr_cntr; i++) {
 		etm4x_relaxed_write32(csa, config->cntrldvr[i], TRCCNTRLDVRn(i));
 		etm4x_relaxed_write32(csa, config->cntr_ctrl[i], TRCCNTCTLRn(i));
@@ -1323,6 +1324,7 @@ static void etm4_init_arch_data(void *info)
 	etmidr5 = etm4x_relaxed_read32(csa, TRCIDR5);
 	/* NUMEXTIN, bits[8:0] number of external inputs implemented */
 	drvdata->nr_ext_inp = FIELD_GET(TRCIDR5_NUMEXTIN_MASK, etmidr5);
+	drvdata->numextinsel = FIELD_GET(TRCIDR5_NUMEXTINSEL_MASK, etmidr5);
 	/* TRACEIDSIZE, bits[21:16] indicates the trace ID width */
 	drvdata->trcid_size = FIELD_GET(TRCIDR5_TRACEIDSIZE_MASK, etmidr5);
 	/* ATBTRIG, bit[22] implementation can support ATB triggers? */
@@ -1750,7 +1752,9 @@ static int __etm4_cpu_save(struct etmv4_drvdata *drvdata)
 		state->trcseqrstevr = etm4x_read32(csa, TRCSEQRSTEVR);
 		state->trcseqstr = etm4x_read32(csa, TRCSEQSTR);
 	}
-	state->trcextinselr = etm4x_read32(csa, TRCEXTINSELR);
+
+	if (drvdata->numextinsel)
+		state->trcextinselr = etm4x_read32(csa, TRCEXTINSELR);
 
 	for (i = 0; i < drvdata->nr_cntr; i++) {
 		state->trccntrldvr[i] = etm4x_read32(csa, TRCCNTRLDVRn(i));
@@ -1882,7 +1886,8 @@ static void __etm4_cpu_restore(struct etmv4_drvdata *drvdata)
 		etm4x_relaxed_write32(csa, state->trcseqrstevr, TRCSEQRSTEVR);
 		etm4x_relaxed_write32(csa, state->trcseqstr, TRCSEQSTR);
 	}
-	etm4x_relaxed_write32(csa, state->trcextinselr, TRCEXTINSELR);
+	if (drvdata->numextinsel)
+		etm4x_relaxed_write32(csa, state->trcextinselr, TRCEXTINSELR);
 
 	for (i = 0; i < drvdata->nr_cntr; i++) {
 		etm4x_relaxed_write32(csa, state->trccntrldvr[i], TRCCNTRLDVRn(i));
diff --git a/drivers/hwtracing/coresight/coresight-etm4x.h b/drivers/hwtracing/coresight/coresight-etm4x.h
index 6b6760e49ed35..d72f742b41054 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x.h
+++ b/drivers/hwtracing/coresight/coresight-etm4x.h
@@ -162,6 +162,7 @@
 #define TRCIDR4_NUMVMIDC_MASK			GENMASK(31, 28)
 
 #define TRCIDR5_NUMEXTIN_MASK			GENMASK(8, 0)
+#define TRCIDR5_NUMEXTINSEL_MASK               GENMASK(11, 9)
 #define TRCIDR5_TRACEIDSIZE_MASK		GENMASK(21, 16)
 #define TRCIDR5_ATBTRIG				BIT(22)
 #define TRCIDR5_LPOVERRIDE			BIT(23)
@@ -999,6 +1000,7 @@ struct etmv4_drvdata {
 	u8				nr_cntr;
 	u8				nr_ext_inp;
 	u8				numcidc;
+	u8				numextinsel;
 	u8				numvmidc;
 	u8				nrseqstate;
 	u8				nr_event;
-- 
2.51.0

[PATCH 6.6 141/196] coresight: etm4x: Support atclk

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Leo Yan <leo.yan@arm.com>

[ Upstream commit 40c0cdc9cbbebae9f43bef1cab9ce152318d0cce ]

The atclk is an optional clock for the CoreSight ETMv4, but the driver
misses to initialize it.

This change enables atclk in probe of the ETMv4 driver, and dynamically
control the clock during suspend and resume.

No need to check the driver data and clock pointer in the runtime
suspend and resume, so remove checks.  And add error handling in the
resume function.

Add a minor fix to the comment format when adding the atclk field.

Fixes: 2e1cdfe184b5 ("coresight-etm4x: Adding CoreSight ETM4x driver")
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250731-arm_cs_fix_clock_v4-v6-3-1dfe10bb3f6f@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../coresight/coresight-etm4x-core.c          | 20 ++++++++++++++-----
 drivers/hwtracing/coresight/coresight-etm4x.h |  4 +++-
 2 files changed, 18 insertions(+), 6 deletions(-)

diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c
index 625582f7dc34c..e4d8d446ea4d3 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x-core.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c
@@ -2118,6 +2118,10 @@ static int etm4_probe(struct device *dev)
 	if (WARN_ON(!drvdata))
 		return -ENOMEM;
 
+	drvdata->atclk = devm_clk_get_optional_enabled(dev, "atclk");
+	if (IS_ERR(drvdata->atclk))
+		return PTR_ERR(drvdata->atclk);
+
 	if (pm_save_enable == PARAM_PM_SAVE_FIRMWARE)
 		pm_save_enable = coresight_loses_context_with_cpu(dev) ?
 			       PARAM_PM_SAVE_SELF_HOSTED : PARAM_PM_SAVE_NEVER;
@@ -2369,8 +2373,8 @@ static int etm4_runtime_suspend(struct device *dev)
 {
 	struct etmv4_drvdata *drvdata = dev_get_drvdata(dev);
 
-	if (drvdata->pclk && !IS_ERR(drvdata->pclk))
-		clk_disable_unprepare(drvdata->pclk);
+	clk_disable_unprepare(drvdata->atclk);
+	clk_disable_unprepare(drvdata->pclk);
 
 	return 0;
 }
@@ -2378,11 +2382,17 @@ static int etm4_runtime_suspend(struct device *dev)
 static int etm4_runtime_resume(struct device *dev)
 {
 	struct etmv4_drvdata *drvdata = dev_get_drvdata(dev);
+	int ret;
+
+	ret = clk_prepare_enable(drvdata->pclk);
+	if (ret)
+		return ret;
 
-	if (drvdata->pclk && !IS_ERR(drvdata->pclk))
-		clk_prepare_enable(drvdata->pclk);
+	ret = clk_prepare_enable(drvdata->atclk);
+	if (ret)
+		clk_disable_unprepare(drvdata->pclk);
 
-	return 0;
+	return ret;
 }
 #endif
 
diff --git a/drivers/hwtracing/coresight/coresight-etm4x.h b/drivers/hwtracing/coresight/coresight-etm4x.h
index d72f742b41054..d8b8102d790cc 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x.h
+++ b/drivers/hwtracing/coresight/coresight-etm4x.h
@@ -920,7 +920,8 @@ struct etmv4_save_state {
 
 /**
  * struct etm4_drvdata - specifics associated to an ETM component
- * @pclk        APB clock if present, otherwise NULL
+ * @pclk:       APB clock if present, otherwise NULL
+ * @atclk:      Optional clock for the core parts of the ETMv4.
  * @base:       Memory mapped base address for this component.
  * @csdev:      Component vitals needed by the framework.
  * @spinlock:   Only one at a time pls.
@@ -988,6 +989,7 @@ struct etmv4_save_state {
  */
 struct etmv4_drvdata {
 	struct clk			*pclk;
+	struct clk			*atclk;
 	void __iomem			*base;
 	struct coresight_device		*csdev;
 	spinlock_t			spinlock;
-- 
2.51.0

[PATCH 6.6 142/196] coresight: trbe: Return NULL pointer for allocation failures

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Leo Yan <leo.yan@arm.com>

[ Upstream commit 8a55c161f7f9c1aa1c70611b39830d51c83ef36d ]

When the TRBE driver fails to allocate a buffer, it currently returns
the error code "-ENOMEM". However, the caller etm_setup_aux() only
checks for a NULL pointer, so it misses the error. As a result, the
driver continues and eventually causes a kernel panic.

Fix this by returning a NULL pointer from arm_trbe_alloc_buffer() on
allocation failures. This allows that the callers can properly handle
the failure.

Fixes: 3fbf7f011f24 ("coresight: sink: Add TRBE driver")
Reported-by: Tamas Zsoldos <tamas.zsoldos@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250904-cs_etm_auxsetup_fix_error_handling-v2-1-a502d0bafb95@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwtracing/coresight/coresight-trbe.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/hwtracing/coresight/coresight-trbe.c b/drivers/hwtracing/coresight/coresight-trbe.c
index 7f91b1ffe66a5..a564bd5c8b62d 100644
--- a/drivers/hwtracing/coresight/coresight-trbe.c
+++ b/drivers/hwtracing/coresight/coresight-trbe.c
@@ -744,12 +744,12 @@ static void *arm_trbe_alloc_buffer(struct coresight_device *csdev,
 
 	buf = kzalloc_node(sizeof(*buf), GFP_KERNEL, trbe_alloc_node(event));
 	if (!buf)
-		return ERR_PTR(-ENOMEM);
+		return NULL;
 
 	pglist = kcalloc(nr_pages, sizeof(*pglist), GFP_KERNEL);
 	if (!pglist) {
 		kfree(buf);
-		return ERR_PTR(-ENOMEM);
+		return NULL;
 	}
 
 	for (i = 0; i < nr_pages; i++)
@@ -759,7 +759,7 @@ static void *arm_trbe_alloc_buffer(struct coresight_device *csdev,
 	if (!buf->trbe_base) {
 		kfree(pglist);
 		kfree(buf);
-		return ERR_PTR(-ENOMEM);
+		return NULL;
 	}
 	buf->trbe_limit = buf->trbe_base + nr_pages * PAGE_SIZE;
 	buf->trbe_write = buf->trbe_base;
-- 
2.51.0

[PATCH 6.6 143/196] NFSv4.1: fix backchannel max_resp_sz verification check

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Anthony Iliopoulos <ailiop@suse.com>

[ Upstream commit 191512355e520dfc45c8bc3b56d4de59c3ade33e ]

When the client max_resp_sz is larger than what the server encodes in
its reply, the nfs4_verify_back_channel_attrs() check fails and this
causes nfs4_proc_create_session() to fail, in cases where the client
page size is larger than that of the server and the server does not want
to negotiate upwards.

While this is not a problem with the linux nfs server that will reflect
the proposed value in its reply irrespective of the local page size,
other nfs server implementations may insist on their own max_resp_sz
value, which could be smaller.

Fix this by accepting smaller max_resp_sz values from the server, as
this does not violate the protocol. The server is allowed to decrease
but not increase proposed the size, and as such values smaller than the
client-proposed ones are valid.

Fixes: 43c2e885be25 ("nfs4: fix channel attribute sanity-checks")
Signed-off-by: Anthony Iliopoulos <ailiop@suse.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/nfs4proc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 124b9cee6fed7..94a1caf326699 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -9226,7 +9226,7 @@ static int nfs4_verify_back_channel_attrs(struct nfs41_create_session_args *args
 		goto out;
 	if (rcvd->max_rqst_sz > sent->max_rqst_sz)
 		return -EINVAL;
-	if (rcvd->max_resp_sz < sent->max_resp_sz)
+	if (rcvd->max_resp_sz > sent->max_resp_sz)
 		return -EINVAL;
 	if (rcvd->max_resp_sz_cached > sent->max_resp_sz_cached)
 		return -EINVAL;
-- 
2.51.0

[PATCH 6.6 144/196] ipvs: Defer ip_vs_ftp unregister during netns cleanup

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Slavin Liu <slavin452@gmail.com>

[ Upstream commit 134121bfd99a06d44ef5ba15a9beb075297c0821 ]

On the netns cleanup path, __ip_vs_ftp_exit() may unregister ip_vs_ftp
before connections with valid cp->app pointers are flushed, leading to a
use-after-free.

Fix this by introducing a global `exiting_module` flag, set to true in
ip_vs_ftp_exit() before unregistering the pernet subsystem. In
__ip_vs_ftp_exit(), skip ip_vs_ftp unregister if called during netns
cleanup (when exiting_module is false) and defer it to
__ip_vs_cleanup_batch(), which unregisters all apps after all connections
are flushed. If called during module exit, unregister ip_vs_ftp
immediately.

Fixes: 61b1ab4583e2 ("IPVS: netns, add basic init per netns.")
Suggested-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Slavin Liu <slavin452@gmail.com>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/ipvs/ip_vs_ftp.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/net/netfilter/ipvs/ip_vs_ftp.c b/net/netfilter/ipvs/ip_vs_ftp.c
index ef1f45e43b630..61d3797fb7995 100644
--- a/net/netfilter/ipvs/ip_vs_ftp.c
+++ b/net/netfilter/ipvs/ip_vs_ftp.c
@@ -53,6 +53,7 @@ enum {
 	IP_VS_FTP_EPSV,
 };
 
+static bool exiting_module;
 /*
  * List of ports (up to IP_VS_APP_MAX_PORTS) to be handled by helper
  * First port is set to the default port.
@@ -605,7 +606,7 @@ static void __ip_vs_ftp_exit(struct net *net)
 {
 	struct netns_ipvs *ipvs = net_ipvs(net);
 
-	if (!ipvs)
+	if (!ipvs || !exiting_module)
 		return;
 
 	unregister_ip_vs_app(ipvs, &ip_vs_ftp);
@@ -627,6 +628,7 @@ static int __init ip_vs_ftp_init(void)
  */
 static void __exit ip_vs_ftp_exit(void)
 {
+	exiting_module = true;
 	unregister_pernet_subsys(&ip_vs_ftp_ops);
 	/* rcu_barrier() is called by netns */
 }
-- 
2.51.0

[PATCH 6.6 145/196] scsi: mpt3sas: Fix crash in transport port remove by using ioc_info()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ranjan Kumar <ranjan.kumar@broadcom.com>

[ Upstream commit 1703fe4f8ae50d1fb6449854e1fcaed1053e3a14 ]

During mpt3sas_transport_port_remove(), messages were logged with
dev_printk() against &mpt3sas_port->port->dev. At this point the SAS
transport device may already be partially unregistered or freed, leading
to a crash when accessing its struct device.

Using ioc_info(), which logs via the PCI device (ioc->pdev->dev),
guaranteed to remain valid until driver removal.

[83428.295776] Oops: general protection fault, probably for non-canonical address 0x6f702f323a33312d: 0000 [#1] SMP NOPTI
[83428.295785] CPU: 145 UID: 0 PID: 113296 Comm: rmmod Kdump: loaded Tainted: G           OE       6.16.0-rc1+ #1 PREEMPT(voluntary)
[83428.295792] Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
[83428.295795] Hardware name: Dell Inc. Precision 7875 Tower/, BIOS 89.1.67 02/23/2024
[83428.295799] RIP: 0010:__dev_printk+0x1f/0x70
[83428.295805] Code: 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 49 89 d1 48 85 f6 74 52 4c 8b 46 50 4d 85 c0 74 1f 48 8b 46 68 48 85 c0 74 22 <48> 8b 08 0f b6 7f 01 48 c7 c2 db e8 42 ad 83 ef 30 e9 7b f8 ff ff
[83428.295813] RSP: 0018:ff85aeafc3137bb0 EFLAGS: 00010206
[83428.295817] RAX: 6f702f323a33312d RBX: ff4290ee81292860 RCX: 5000cca25103be32
[83428.295820] RDX: ff85aeafc3137bb8 RSI: ff4290eeb1966c00 RDI: ffffffffc1560845
[83428.295823] RBP: ff85aeafc3137c18 R08: 74726f702f303a33 R09: ff85aeafc3137bb8
[83428.295826] R10: ff85aeafc3137b18 R11: ff4290f5bd60fe68 R12: ff4290ee81290000
[83428.295830] R13: ff4290ee6e345de0 R14: ff4290ee81290000 R15: ff4290ee6e345e30
[83428.295833] FS:  00007fd9472a6740(0000) GS:ff4290f5ce96b000(0000) knlGS:0000000000000000
[83428.295837] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[83428.295840] CR2: 00007f242b4db238 CR3: 00000002372b8006 CR4: 0000000000771ef0
[83428.295844] PKRU: 55555554
[83428.295846] Call Trace:
[83428.295848]  <TASK>
[83428.295850]  _dev_printk+0x5c/0x80
[83428.295857]  ? srso_alias_return_thunk+0x5/0xfbef5
[83428.295863]  mpt3sas_transport_port_remove+0x1c7/0x420 [mpt3sas]
[83428.295882]  _scsih_remove_device+0x21b/0x280 [mpt3sas]
[83428.295894]  ? _scsih_expander_node_remove+0x108/0x140 [mpt3sas]
[83428.295906]  ? srso_alias_return_thunk+0x5/0xfbef5
[83428.295910]  mpt3sas_device_remove_by_sas_address.part.0+0x8f/0x110 [mpt3sas]
[83428.295921]  _scsih_expander_node_remove+0x129/0x140 [mpt3sas]
[83428.295933]  _scsih_expander_node_remove+0x6a/0x140 [mpt3sas]
[83428.295944]  scsih_remove+0x3f0/0x4a0 [mpt3sas]
[83428.295957]  pci_device_remove+0x3b/0xb0
[83428.295962]  device_release_driver_internal+0x193/0x200
[83428.295968]  driver_detach+0x44/0x90
[83428.295971]  bus_remove_driver+0x69/0xf0
[83428.295975]  pci_unregister_driver+0x2a/0xb0
[83428.295979]  _mpt3sas_exit+0x1f/0x300 [mpt3sas]
[83428.295991]  __do_sys_delete_module.constprop.0+0x174/0x310
[83428.295997]  ? srso_alias_return_thunk+0x5/0xfbef5
[83428.296000]  ? __x64_sys_getdents64+0x9a/0x110
[83428.296005]  ? srso_alias_return_thunk+0x5/0xfbef5
[83428.296009]  ? syscall_trace_enter+0xf6/0x1b0
[83428.296014]  do_syscall_64+0x7b/0x2c0
[83428.296019]  ? srso_alias_return_thunk+0x5/0xfbef5
[83428.296023]  entry_SYSCALL_64_after_hwframe+0x76/0x7e

Fixes: f92363d12359 ("[SCSI] mpt3sas: add new driver supporting 12GB SAS")
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/mpt3sas/mpt3sas_transport.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_transport.c b/drivers/scsi/mpt3sas/mpt3sas_transport.c
index e8a4750f6ec47..7d6e4fe31ceed 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_transport.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_transport.c
@@ -991,11 +991,9 @@ mpt3sas_transport_port_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address,
 	list_for_each_entry_safe(mpt3sas_phy, next_phy,
 	    &mpt3sas_port->phy_list, port_siblings) {
 		if ((ioc->logging_level & MPT_DEBUG_TRANSPORT))
-			dev_printk(KERN_INFO, &mpt3sas_port->port->dev,
-			    "remove: sas_addr(0x%016llx), phy(%d)\n",
-			    (unsigned long long)
-			    mpt3sas_port->remote_identify.sas_address,
-			    mpt3sas_phy->phy_id);
+			ioc_info(ioc, "remove: sas_addr(0x%016llx), phy(%d)\n",
+				(unsigned long long) mpt3sas_port->remote_identify.sas_address,
+					mpt3sas_phy->phy_id);
 		mpt3sas_phy->phy_belongs_to_port = 0;
 		if (!ioc->remove_host)
 			sas_port_delete_phy(mpt3sas_port->port,
-- 
2.51.0

[PATCH 6.6 146/196] usb: vhci-hcd: Prevent suspending virtually attached devices

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>

[ Upstream commit e40b984b6c4ce3f80814f39f86f87b2a48f2e662 ]

The VHCI platform driver aims to forbid entering system suspend when at
least one of the virtual USB ports are bound to an active USB/IP
connection.

However, in some cases, the detection logic doesn't work reliably, i.e.
when all devices attached to the virtual root hub have been already
suspended, leading to a broken suspend state, with unrecoverable resume.

Ensure the virtually attached devices do not enter suspend by setting
the syscore PM flag.  Note this is currently limited to the client side
only, since the server side doesn't implement system suspend prevention.

Fixes: 04679b3489e0 ("Staging: USB/IP: add client driver")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250902-vhci-hcd-suspend-fix-v3-1-864e4e833559@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/usbip/vhci_hcd.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c
index 14a5f55f24fc8..b22e0881bfaf3 100644
--- a/drivers/usb/usbip/vhci_hcd.c
+++ b/drivers/usb/usbip/vhci_hcd.c
@@ -764,6 +764,17 @@ static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flag
 				 ctrlreq->wValue, vdev->rhport);
 
 			vdev->udev = usb_get_dev(urb->dev);
+			/*
+			 * NOTE: A similar operation has been done via
+			 * USB_REQ_GET_DESCRIPTOR handler below, which is
+			 * supposed to always precede USB_REQ_SET_ADDRESS.
+			 *
+			 * It's not entirely clear if operating on a different
+			 * usb_device instance here is a real possibility,
+			 * otherwise this call and vdev->udev assignment above
+			 * should be dropped.
+			 */
+			dev_pm_syscore_device(&vdev->udev->dev, true);
 			usb_put_dev(old);
 
 			spin_lock(&vdev->ud.lock);
@@ -784,6 +795,17 @@ static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flag
 					"Not yet?:Get_Descriptor to device 0 (get max pipe size)\n");
 
 			vdev->udev = usb_get_dev(urb->dev);
+			/*
+			 * Set syscore PM flag for the virtually attached
+			 * devices to ensure they will not enter suspend on
+			 * the client side.
+			 *
+			 * Note this doesn't have any impact on the physical
+			 * devices attached to the host system on the server
+			 * side, hence there is no need to undo the operation
+			 * on disconnect.
+			 */
+			dev_pm_syscore_device(&vdev->udev->dev, true);
 			usb_put_dev(old);
 			goto out;
 
-- 
2.51.0

[PATCH 6.6 147/196] RDMA/siw: Always report immediate post SQ errors

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bernard Metzler <bernard.metzler@linux.dev>

[ Upstream commit fdd0fe94d68649322e391c5c27dd9f436b4e955e ]

In siw_post_send(), any immediate error encountered during processing of
the work request list must be reported to the caller, even if previous
work requests in that list were just accepted and added to the send queue.

Not reporting those errors confuses the caller, which would wait
indefinitely for the failing and potentially subsequently aborted work
requests completion.

This fixes a case where immediate errors were overwritten by subsequent
code in siw_post_send().

Fixes: 303ae1cdfdf7 ("rdma/siw: application interface")
Link: https://patch.msgid.link/r/20250923144536.103825-1-bernard.metzler@linux.dev
Suggested-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Bernard Metzler <bernard.metzler@linux.dev>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/sw/siw/siw_verbs.c | 25 ++++++++++++++-----------
 1 file changed, 14 insertions(+), 11 deletions(-)

diff --git a/drivers/infiniband/sw/siw/siw_verbs.c b/drivers/infiniband/sw/siw/siw_verbs.c
index fdbef3254e308..1768b8695c45a 100644
--- a/drivers/infiniband/sw/siw/siw_verbs.c
+++ b/drivers/infiniband/sw/siw/siw_verbs.c
@@ -761,7 +761,7 @@ int siw_post_send(struct ib_qp *base_qp, const struct ib_send_wr *wr,
 	struct siw_wqe *wqe = tx_wqe(qp);
 
 	unsigned long flags;
-	int rv = 0;
+	int rv = 0, imm_err = 0;
 
 	if (wr && !rdma_is_kernel_res(&qp->base_qp.res)) {
 		siw_dbg_qp(qp, "wr must be empty for user mapped sq\n");
@@ -947,9 +947,17 @@ int siw_post_send(struct ib_qp *base_qp, const struct ib_send_wr *wr,
 	 * Send directly if SQ processing is not in progress.
 	 * Eventual immediate errors (rv < 0) do not affect the involved
 	 * RI resources (Verbs, 8.3.1) and thus do not prevent from SQ
-	 * processing, if new work is already pending. But rv must be passed
-	 * to caller.
+	 * processing, if new work is already pending. But rv and pointer
+	 * to failed work request must be passed to caller.
 	 */
+	if (unlikely(rv < 0)) {
+		/*
+		 * Immediate error
+		 */
+		siw_dbg_qp(qp, "Immediate error %d\n", rv);
+		imm_err = rv;
+		*bad_wr = wr;
+	}
 	if (wqe->wr_status != SIW_WR_IDLE) {
 		spin_unlock_irqrestore(&qp->sq_lock, flags);
 		goto skip_direct_sending;
@@ -974,15 +982,10 @@ int siw_post_send(struct ib_qp *base_qp, const struct ib_send_wr *wr,
 
 	up_read(&qp->state_lock);
 
-	if (rv >= 0)
-		return 0;
-	/*
-	 * Immediate error
-	 */
-	siw_dbg_qp(qp, "error %d\n", rv);
+	if (unlikely(imm_err))
+		return imm_err;
 
-	*bad_wr = wr;
-	return rv;
+	return (rv >= 0) ? 0 : rv;
 }
 
 /*
-- 
2.51.0

[PATCH 6.6 148/196] net: usb: Remove disruptive netif_wake_queue in rtl8150_set_multicast

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: I Viswanath <viswanathiyyappan@gmail.com>

[ Upstream commit 958baf5eaee394e5fd976979b0791a875f14a179 ]

syzbot reported WARNING in rtl8150_start_xmit/usb_submit_urb.
This is the sequence of events that leads to the warning:

rtl8150_start_xmit() {
	netif_stop_queue();
	usb_submit_urb(dev->tx_urb);
}

rtl8150_set_multicast() {
	netif_stop_queue();
	netif_wake_queue();		<-- wakes up TX queue before URB is done
}

rtl8150_start_xmit() {
	netif_stop_queue();
	usb_submit_urb(dev->tx_urb);	<-- double submission
}

rtl8150_set_multicast being the ndo_set_rx_mode callback should not be
calling netif_stop_queue and notif_start_queue as these handle
TX queue synchronization.

The net core function dev_set_rx_mode handles the synchronization
for rtl8150_set_multicast making it safe to remove these locks.

Reported-and-tested-by: syzbot+78cae3f37c62ad092caa@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=78cae3f37c62ad092caa
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Tested-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: I Viswanath <viswanathiyyappan@gmail.com>
Link: https://patch.msgid.link/20250924134350.264597-1-viswanathiyyappan@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/rtl8150.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/net/usb/rtl8150.c b/drivers/net/usb/rtl8150.c
index ddff6f19ff98e..92add3daadbb1 100644
--- a/drivers/net/usb/rtl8150.c
+++ b/drivers/net/usb/rtl8150.c
@@ -664,7 +664,6 @@ static void rtl8150_set_multicast(struct net_device *netdev)
 	rtl8150_t *dev = netdev_priv(netdev);
 	u16 rx_creg = 0x9e;
 
-	netif_stop_queue(netdev);
 	if (netdev->flags & IFF_PROMISC) {
 		rx_creg |= 0x0001;
 		dev_info(&netdev->dev, "%s: promiscuous mode\n", netdev->name);
@@ -678,7 +677,6 @@ static void rtl8150_set_multicast(struct net_device *netdev)
 		rx_creg &= 0x00fc;
 	}
 	async_set_registers(dev, RCR, sizeof(rx_creg), rx_creg);
-	netif_wake_queue(netdev);
 }
 
 static netdev_tx_t rtl8150_start_xmit(struct sk_buff *skb,
-- 
2.51.0

[PATCH 6.6 149/196] vhost: vringh: Fix copy_to_iter return value check

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael S. Tsirkin <mst@redhat.com>

[ Upstream commit 439263376c2c4e126cac0d07e4987568de4eaba5 ]

The return value of copy_to_iter can't be negative, check whether the
copied length is equal to the requested length instead of checking for
negative values.

Cc: zhang jiao <zhangjiao2@cmss.chinamobile.com>
Link: https://lore.kernel.org/all/20250910091739.2999-1-zhangjiao2@cmss.chinamobile.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 309bba39c945 ("vringh: iterate on iotlb_translate to handle large translations")
Link: https://patch.msgid.link/cd637504a6e3967954a9e80fc1b75e8c0978087b.1758723310.git.mst@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vhost/vringh.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/vhost/vringh.c b/drivers/vhost/vringh.c
index 7b8fd977f71cc..60961c65fd472 100644
--- a/drivers/vhost/vringh.c
+++ b/drivers/vhost/vringh.c
@@ -1237,6 +1237,7 @@ static inline int copy_to_iotlb(const struct vringh *vrh, void *dst,
 		struct iov_iter iter;
 		u64 translated;
 		int ret;
+		size_t size;
 
 		ret = iotlb_translate(vrh, (u64)(uintptr_t)dst,
 				      len - total_translated, &translated,
@@ -1254,9 +1255,9 @@ static inline int copy_to_iotlb(const struct vringh *vrh, void *dst,
 				      translated);
 		}
 
-		ret = copy_to_iter(src, translated, &iter);
-		if (ret < 0)
-			return ret;
+		size = copy_to_iter(src, translated, &iter);
+		if (size != translated)
+			return -EFAULT;
 
 		src += translated;
 		dst += translated;
-- 
2.51.0

[PATCH 6.6 150/196] Bluetooth: MGMT: Fix not exposing debug UUID on MGMT_OP_READ_EXP_FEATURES_INFO

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

[ Upstream commit 79e562a52adea4afa0601a15964498fae66c823c ]

The debug UUID was only getting set if MGMT_OP_READ_EXP_FEATURES_INFO
was not called with a specific index which breaks the likes of
bluetoothd since it only invokes MGMT_OP_READ_EXP_FEATURES_INFO when an
adapter is plugged, so instead of depending hdev not to be set just
enable the UUID on any index like it was done with iso_sock_uuid.

Fixes: e625e50ceee1 ("Bluetooth: Introduce debug feature when dynamic debug is disabled")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/mgmt.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index 9b01eaaa0eb2d..54ddbb2635e2f 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -4405,13 +4405,11 @@ static int read_exp_features_info(struct sock *sk, struct hci_dev *hdev,
 		return -ENOMEM;
 
 #ifdef CONFIG_BT_FEATURE_DEBUG
-	if (!hdev) {
-		flags = bt_dbg_get() ? BIT(0) : 0;
+	flags = bt_dbg_get() ? BIT(0) : 0;
 
-		memcpy(rp->features[idx].uuid, debug_uuid, 16);
-		rp->features[idx].flags = cpu_to_le32(flags);
-		idx++;
-	}
+	memcpy(rp->features[idx].uuid, debug_uuid, 16);
+	rp->features[idx].flags = cpu_to_le32(flags);
+	idx++;
 #endif
 
 	if (hdev && hci_dev_le_state_simultaneous(hdev)) {
-- 
2.51.0

[PATCH 6.6 151/196] Bluetooth: ISO: Fix possible UAF on iso_conn_free

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

[ Upstream commit 9950f095d6c875dbe0c9ebfcf972ec88fdf26fc8 ]

This attempt to fix similar issue to sco_conn_free where if the
conn->sk is not set to NULL may lead to UAF on iso_conn_free.

Fixes: ccf74f2390d6 ("Bluetooth: Add BTPROTO_ISO socket type")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/iso.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/net/bluetooth/iso.c b/net/bluetooth/iso.c
index b94d202bf3745..be71082d9eafa 100644
--- a/net/bluetooth/iso.c
+++ b/net/bluetooth/iso.c
@@ -718,6 +718,13 @@ static void iso_sock_kill(struct sock *sk)
 
 	BT_DBG("sk %p state %d", sk, sk->sk_state);
 
+	/* Sock is dead, so set conn->sk to NULL to avoid possible UAF */
+	if (iso_pi(sk)->conn) {
+		iso_conn_lock(iso_pi(sk)->conn);
+		iso_pi(sk)->conn->sk = NULL;
+		iso_conn_unlock(iso_pi(sk)->conn);
+	}
+
 	/* Kill poor orphan */
 	bt_sock_unlink(&iso_sk_list, sk);
 	sock_set_flag(sk, SOCK_DEAD);
-- 
2.51.0

[PATCH 6.6 152/196] Bluetooth: ISO: dont leak skb in ISO_CONT RX

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pauli Virtanen <pav@iki.fi>

[ Upstream commit 5bf863f4c5da055c1eb08887ae4f26d99dbc4aac ]

For ISO_CONT RX, the data from skb is copied to conn->rx_skb, but the
skb is leaked.

Free skb after copying its data.

Fixes: ccf74f2390d6 ("Bluetooth: Add BTPROTO_ISO socket type")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/iso.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/bluetooth/iso.c b/net/bluetooth/iso.c
index be71082d9eafa..69529a3049e74 100644
--- a/net/bluetooth/iso.c
+++ b/net/bluetooth/iso.c
@@ -2091,7 +2091,7 @@ void iso_recv(struct hci_conn *hcon, struct sk_buff *skb, u16 flags)
 		skb_copy_from_linear_data(skb, skb_put(conn->rx_skb, skb->len),
 					  skb->len);
 		conn->rx_len -= skb->len;
-		return;
+		break;
 
 	case ISO_END:
 		skb_copy_from_linear_data(skb, skb_put(conn->rx_skb, skb->len),
-- 
2.51.0

[PATCH 6.6 153/196] Bluetooth: hci_sync: Fix using random address for BIG/PA advertisements

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

[ Upstream commit 03ddb4ac251463ec5b7b069395d9ab89163dd56c ]

When creating an advertisement for BIG the address shall not be
non-resolvable since in case of acting as BASS/Broadcast Assistant the
address must be the same as the connection in order to use the PAST
method and even when PAST/BASS are not in the picture a Periodic
Advertisement can still be synchronized thus the same argument as to
connectable advertisements still stand.

Fixes: eca0ae4aea66 ("Bluetooth: Add initial implementation of BIS connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/hci_sync.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c
index dc9209f9f1a6a..a128e5709fa15 100644
--- a/net/bluetooth/hci_sync.c
+++ b/net/bluetooth/hci_sync.c
@@ -1347,7 +1347,7 @@ int hci_setup_ext_adv_instance_sync(struct hci_dev *hdev, u8 instance)
 {
 	struct hci_cp_le_set_ext_adv_params cp;
 	struct hci_rp_le_set_ext_adv_params rp;
-	bool connectable;
+	bool connectable, require_privacy;
 	u32 flags;
 	bdaddr_t random_addr;
 	u8 own_addr_type;
@@ -1385,10 +1385,12 @@ int hci_setup_ext_adv_instance_sync(struct hci_dev *hdev, u8 instance)
 		return -EPERM;
 
 	/* Set require_privacy to true only when non-connectable
-	 * advertising is used. In that case it is fine to use a
-	 * non-resolvable private address.
+	 * advertising is used and it is not periodic.
+	 * In that case it is fine to use a non-resolvable private address.
 	 */
-	err = hci_get_random_address(hdev, !connectable,
+	require_privacy = !connectable && !(adv && adv->periodic);
+
+	err = hci_get_random_address(hdev, require_privacy,
 				     adv_use_rpa(hdev, flags), adv,
 				     &own_addr_type, &random_addr);
 	if (err < 0)
-- 
2.51.0

[PATCH 6.6 154/196] KEYS: X.509: Fix Basic Constraints CA flag parsing

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Fan Wu <wufan@kernel.org>

[ Upstream commit 5851afffe2ab323a53e184ba5a35fddf268f096b ]

Fix the X.509 Basic Constraints CA flag parsing to correctly handle
the ASN.1 DER encoded structure. The parser was incorrectly treating
the length field as the boolean value.

Per RFC 5280 section 4.1, X.509 certificates must use ASN.1 DER encoding.
According to ITU-T X.690, a DER-encoded BOOLEAN is represented as:

Tag (0x01), Length (0x01), Value (0x00 for FALSE, 0xFF for TRUE)

The basicConstraints extension with CA:TRUE is encoded as:

  SEQUENCE (0x30) | Length | BOOLEAN (0x01) | Length (0x01) | Value (0xFF)
                             ^-- v[2]         ^-- v[3]        ^-- v[4]

The parser was checking v[3] (the length field, always 0x01) instead
of v[4] (the actual boolean value, 0xFF for TRUE in DER encoding).

Also handle the case where the extension is an empty SEQUENCE (30 00),
which is valid for CA:FALSE when the default value is omitted as
required by DER encoding rules (X.690 section 11.5).

Per ITU-T X.690-0207:
- Section 11.5: Default values must be omitted in DER
- Section 11.1: DER requires TRUE to be encoded as 0xFF

Link: https://datatracker.ietf.org/doc/html/rfc5280
Link: https://www.itu.int/ITU-T/studygroups/com17/languages/X.690-0207.pdf
Fixes: 30eae2b037af ("KEYS: X.509: Parse Basic Constraints for CA")
Signed-off-by: Fan Wu <wufan@kernel.org>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 crypto/asymmetric_keys/x509_cert_parser.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/crypto/asymmetric_keys/x509_cert_parser.c b/crypto/asymmetric_keys/x509_cert_parser.c
index 0a7049b470c18..5201f47e31d8b 100644
--- a/crypto/asymmetric_keys/x509_cert_parser.c
+++ b/crypto/asymmetric_keys/x509_cert_parser.c
@@ -618,11 +618,14 @@ int x509_process_extension(void *context, size_t hdrlen,
 		/*
 		 * Get hold of the basicConstraints
 		 * v[1] is the encoding size
-		 *	(Expect 0x2 or greater, making it 1 or more bytes)
+		 *	(Expect 0x00 for empty SEQUENCE with CA:FALSE, or
+		 *	0x03 or greater for non-empty SEQUENCE)
 		 * v[2] is the encoding type
 		 *	(Expect an ASN1_BOOL for the CA)
-		 * v[3] is the contents of the ASN1_BOOL
-		 *      (Expect 1 if the CA is TRUE)
+		 * v[3] is the length of the ASN1_BOOL
+		 *	(Expect 1 for a single byte boolean)
+		 * v[4] is the contents of the ASN1_BOOL
+		 *	(Expect 0xFF if the CA is TRUE)
 		 * vlen should match the entire extension size
 		 */
 		if (v[0] != (ASN1_CONS_BIT | ASN1_SEQ))
@@ -631,8 +634,13 @@ int x509_process_extension(void *context, size_t hdrlen,
 			return -EBADMSG;
 		if (v[1] != vlen - 2)
 			return -EBADMSG;
-		if (vlen >= 4 && v[1] != 0 && v[2] == ASN1_BOOL && v[3] == 1)
+		/* Empty SEQUENCE means CA:FALSE (default value omitted per DER) */
+		if (v[1] == 0)
+			return 0;
+		if (vlen >= 5 && v[2] == ASN1_BOOL && v[3] == 1 && v[4] == 0xFF)
 			ctx->cert->pub->key_eflags |= 1 << KEY_EFLAG_CA;
+		else
+			return -EBADMSG;
 		return 0;
 	}
 
-- 
2.51.0

[PATCH 6.6 155/196] hwrng: ks-sa - fix division by zero in ks_sa_rng_init

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nishanth Menon <nm@ti.com>

[ Upstream commit 612b1dfeb414dfa780a6316014ceddf9a74ff5c0 ]

Fix division by zero in ks_sa_rng_init caused by missing clock
pointer initialization. The clk_get_rate() call is performed on
an uninitialized clk pointer, resulting in division by zero when
calculating delay values.

Add clock initialization code before using the clock.

Fixes: 6d01d8511dce ("hwrng: ks-sa - Add minimum sleep time before ready-polling")
Signed-off-by: Nishanth Menon <nm@ti.com>

 drivers/char/hw_random/ks-sa-rng.c | 7 +++++++
 1 file changed, 7 insertions(+)
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/char/hw_random/ks-sa-rng.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/char/hw_random/ks-sa-rng.c b/drivers/char/hw_random/ks-sa-rng.c
index 2f2f21f1b659e..d7b42888f25c2 100644
--- a/drivers/char/hw_random/ks-sa-rng.c
+++ b/drivers/char/hw_random/ks-sa-rng.c
@@ -240,6 +240,10 @@ static int ks_sa_rng_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
+	ks_sa_rng->clk = devm_clk_get_enabled(dev, NULL);
+	if (IS_ERR(ks_sa_rng->clk))
+		return dev_err_probe(dev, PTR_ERR(ks_sa_rng->clk), "Failed to get clock\n");
+
 	pm_runtime_enable(dev);
 	ret = pm_runtime_resume_and_get(dev);
 	if (ret < 0) {
-- 
2.51.0

[PATCH 6.6 156/196] ocfs2: fix double free in user_cluster_connect()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@linaro.org>

[ Upstream commit 8f45f089337d924db24397f55697cda0e6960516 ]

user_cluster_disconnect() frees "conn->cc_private" which is "lc" but then
the error handling frees "lc" a second time.  Set "lc" to NULL on this
path to avoid a double free.

Link: https://lkml.kernel.org/r/aNKDz_7JF7aycZ0k@stanley.mountain
Fixes: c994c2ebdbbc ("ocfs2: use the new DLM operation callbacks while requesting new lockspace")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.de>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ocfs2/stack_user.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/ocfs2/stack_user.c b/fs/ocfs2/stack_user.c
index 9b76ee66aeb2f..38c0d6f64fce3 100644
--- a/fs/ocfs2/stack_user.c
+++ b/fs/ocfs2/stack_user.c
@@ -1018,6 +1018,7 @@ static int user_cluster_connect(struct ocfs2_cluster_connection *conn)
 			printk(KERN_ERR "ocfs2: Could not determine"
 					" locking version\n");
 			user_cluster_disconnect(conn);
+			lc = NULL;
 			goto out;
 		}
 		wait_event(lc->oc_wait, (atomic_read(&lc->oc_this_node) > 0));
-- 
2.51.0

[PATCH 6.6 157/196] drivers/base/node: fix double free in register_one_node()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Donet Tom <donettom@linux.ibm.com>

[ Upstream commit 0efdedfa537eb534c251a5b4794caaf72cc55869 ]

When device_register() fails in register_node(), it calls
put_device(&node->dev).  This triggers node_device_release(), which calls
kfree(to_node(dev)), thereby freeing the entire node structure.

As a result, when register_node() returns an error, the node memory has
already been freed.  Calling kfree(node) again in register_one_node()
leads to a double free.

This patch removes the redundant kfree(node) from register_one_node() to
prevent the double free.

Link: https://lkml.kernel.org/r/20250918054144.58980-1-donettom@linux.ibm.com
Fixes: 786eb990cfb7 ("drivers/base/node: handle error properly in register_one_node()")
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Chris Mason <clm@meta.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hiroyouki Kamezawa <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Joanthan Cameron <Jonathan.Cameron@huawei.com>
Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Cc: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/base/node.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/base/node.c b/drivers/base/node.c
index 7b2ff66c119ae..47960a34305d3 100644
--- a/drivers/base/node.c
+++ b/drivers/base/node.c
@@ -880,7 +880,6 @@ int __register_one_node(int nid)
 	error = register_node(node_devices[nid], nid);
 	if (error) {
 		node_devices[nid] = NULL;
-		kfree(node);
 		return error;
 	}
 
-- 
2.51.0

[PATCH 6.6 158/196] mtd: rawnand: atmel: Fix error handling path in atmel_nand_controller_add_nands

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Erick Karanja <karanja99erick@gmail.com>

[ Upstream commit 8ed4728eb9f10b57c3eb02e0f6933a89ffcb8a91 ]

In case of a jump to the  err label due to atmel_nand_create() or
atmel_nand_controller_add_nand() failure, the reference to nand_np
need to be released

Use for_each_child_of_node_scoped() to fix the issue.

Fixes: f88fc122cc34 ("mtd: nand: Cleanup/rework the atmel_nand driver")

Signed-off-by: Erick Karanja <karanja99erick@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mtd/nand/raw/atmel/nand-controller.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/nand/raw/atmel/nand-controller.c b/drivers/mtd/nand/raw/atmel/nand-controller.c
index c5aff27ec4a89..14a09285f1551 100644
--- a/drivers/mtd/nand/raw/atmel/nand-controller.c
+++ b/drivers/mtd/nand/raw/atmel/nand-controller.c
@@ -1858,7 +1858,7 @@ atmel_nand_controller_legacy_add_nands(struct atmel_nand_controller *nc)
 
 static int atmel_nand_controller_add_nands(struct atmel_nand_controller *nc)
 {
-	struct device_node *np, *nand_np;
+	struct device_node *np;
 	struct device *dev = nc->dev;
 	int ret, reg_cells;
 	u32 val;
@@ -1885,7 +1885,7 @@ static int atmel_nand_controller_add_nands(struct atmel_nand_controller *nc)
 
 	reg_cells += val;
 
-	for_each_child_of_node(np, nand_np) {
+	for_each_child_of_node_scoped(np, nand_np) {
 		struct atmel_nand *nand;
 
 		nand = atmel_nand_create(nc, nand_np, reg_cells);
-- 
2.51.0

[PATCH 6.6 159/196] nfp: fix RSS hash key size when RSS is not supported

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kohei Enju <enjuk@amazon.com>

[ Upstream commit 8425161ac1204d2185e0a10f5ae652bae75d2451 ]

The nfp_net_get_rxfh_key_size() function returns -EOPNOTSUPP when
devices don't support RSS, and callers treat the negative value as a
large positive value since the return type is u32.

Return 0 when devices don't support RSS, aligning with the ethtool
interface .get_rxfh_key_size() that requires returning 0 in such cases.

Fixes: 9ff304bfaf58 ("nfp: add support for reporting CRC32 hash function")
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Link: https://patch.msgid.link/20250929054230.68120-1-enjuk@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c b/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c
index e75cbb287625f..87383f9d09ce3 100644
--- a/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c
+++ b/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c
@@ -1413,7 +1413,7 @@ static u32 nfp_net_get_rxfh_key_size(struct net_device *netdev)
 	struct nfp_net *nn = netdev_priv(netdev);
 
 	if (!(nn->cap & NFP_NET_CFG_CTRL_RSS_ANY))
-		return -EOPNOTSUPP;
+		return 0;
 
 	return nfp_net_rss_key_sz(nn);
 }
-- 
2.51.0

[PATCH 6.6 160/196] net: ena: return 0 in ena_get_rxfh_key_size() when RSS hash key is not configurable

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kohei Enju <enjuk@amazon.com>

[ Upstream commit f017156aea60db8720e47591ed1e041993381ad2 ]

In EC2 instances where the RSS hash key is not configurable, ethtool
shows bogus RSS hash key since ena_get_rxfh_key_size() unconditionally
returns ENA_HASH_KEY_SIZE.

Commit 6a4f7dc82d1e ("net: ena: rss: do not allocate key when not
supported") added proper handling for devices that don't support RSS
hash key configuration, but ena_get_rxfh_key_size() has been unchanged.

When the RSS hash key is not configurable, return 0 instead of
ENA_HASH_KEY_SIZE to clarify getting the value is not supported.

Tested on m5 instance families.

Without patch:
 # ethtool -x ens5 | grep -A 1 "RSS hash key"
 RSS hash key:
 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00

With patch:
 # ethtool -x ens5 | grep -A 1 "RSS hash key"
 RSS hash key:
 Operation not supported

Fixes: 6a4f7dc82d1e ("net: ena: rss: do not allocate key when not supported")
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Link: https://patch.msgid.link/20250929050247.51680-1-enjuk@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/amazon/ena/ena_ethtool.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/amazon/ena/ena_ethtool.c b/drivers/net/ethernet/amazon/ena/ena_ethtool.c
index d901877544445..82a7c52fdb721 100644
--- a/drivers/net/ethernet/amazon/ena/ena_ethtool.c
+++ b/drivers/net/ethernet/amazon/ena/ena_ethtool.c
@@ -752,7 +752,10 @@ static u32 ena_get_rxfh_indir_size(struct net_device *netdev)
 
 static u32 ena_get_rxfh_key_size(struct net_device *netdev)
 {
-	return ENA_HASH_KEY_SIZE;
+	struct ena_adapter *adapter = netdev_priv(netdev);
+	struct ena_rss *rss = &adapter->ena_dev->rss;
+
+	return rss->hash_key ? ENA_HASH_KEY_SIZE : 0;
 }
 
 static int ena_indirection_table_set(struct ena_adapter *adapter,
-- 
2.51.0

[PATCH 6.6 161/196] net: dlink: handle copy_thresh allocation failure

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yeounsu Moon <yyyynoom@gmail.com>

[ Upstream commit 8169a6011c5fecc6cb1c3654c541c567d3318de8 ]

The driver did not handle failure of `netdev_alloc_skb_ip_align()`.
If the allocation failed, dereferencing `skb->protocol` could lead to
a NULL pointer dereference.

This patch tries to allocate `skb`. If the allocation fails, it falls
back to the normal path.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Tested-on: D-Link DGE-550T Rev-A3
Signed-off-by: Yeounsu Moon <yyyynoom@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250928190124.1156-1-yyyynoom@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/dlink/dl2k.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/dlink/dl2k.c b/drivers/net/ethernet/dlink/dl2k.c
index f1208591ed67e..1c3a5cf379cd0 100644
--- a/drivers/net/ethernet/dlink/dl2k.c
+++ b/drivers/net/ethernet/dlink/dl2k.c
@@ -954,15 +954,18 @@ receive_packet (struct net_device *dev)
 		} else {
 			struct sk_buff *skb;
 
+			skb = NULL;
 			/* Small skbuffs for short packets */
-			if (pkt_len > copy_thresh) {
+			if (pkt_len <= copy_thresh)
+				skb = netdev_alloc_skb_ip_align(dev, pkt_len);
+			if (!skb) {
 				dma_unmap_single(&np->pdev->dev,
 						 desc_to_dma(desc),
 						 np->rx_buf_sz,
 						 DMA_FROM_DEVICE);
 				skb_put (skb = np->rx_skbuff[entry], pkt_len);
 				np->rx_skbuff[entry] = NULL;
-			} else if ((skb = netdev_alloc_skb_ip_align(dev, pkt_len))) {
+			} else {
 				dma_sync_single_for_cpu(&np->pdev->dev,
 							desc_to_dma(desc),
 							np->rx_buf_sz,
-- 
2.51.0

[PATCH 6.6 162/196] net/mlx5: Stop polling for command response if interface goes down

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Moshe Shemesh <moshe@nvidia.com>

[ Upstream commit b1f0349bd6d320c382df2e7f6fc2ac95c85f2b18 ]

Stop polling on firmware response to command in polling mode if the
command interface got down. This situation can occur, for example, if a
firmware fatal error is detected during polling.

This change halts the polling process when the command interface goes
down, preventing unnecessary waits.

Fixes: b898ce7bccf1 ("net/mlx5: cmdif, Avoid skipping reclaim pages if FW is not accessible")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
index 5a2126679415c..336e0a54b3dc2 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
@@ -289,6 +289,10 @@ static void poll_timeout(struct mlx5_cmd_work_ent *ent)
 			return;
 		}
 		cond_resched();
+		if (mlx5_cmd_is_down(dev)) {
+			ent->ret = -ENXIO;
+			return;
+		}
 	} while (time_before(jiffies, poll_end));
 
 	ent->ret = -ETIMEDOUT;
@@ -1059,7 +1063,7 @@ static void cmd_work_handler(struct work_struct *work)
 		poll_timeout(ent);
 		/* make sure we read the descriptor after ownership is SW */
 		rmb();
-		mlx5_cmd_comp_handler(dev, 1ULL << ent->idx, (ent->ret == -ETIMEDOUT));
+		mlx5_cmd_comp_handler(dev, 1ULL << ent->idx, !!ent->ret);
 	}
 }
 
-- 
2.51.0

[PATCH 6.6 163/196] net/mlx5: pagealloc: Fix reclaim race during command interface teardown

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shay Drory <shayd@nvidia.com>

[ Upstream commit 79a0e32b32ac4e4f9e4bb22be97f371c8c116c88 ]

The reclaim_pages_cmd() function sends a command to the firmware to
reclaim pages if the command interface is active.

A race condition can occur if the command interface goes down (e.g., due
to a PCI error) while the mlx5_cmd_do() call is in flight. In this
case, mlx5_cmd_do() will return an error. The original code would
propagate this error immediately, bypassing the software-based page
reclamation logic that is supposed to run when the command interface is
down.

Fix this by checking whether mlx5_cmd_do() returns -ENXIO, which mark
that command interface is down. If this is the case, fall through to
the software reclamation path. If the command failed for any another
reason, or finished successfully, return as before.

Fixes: b898ce7bccf1 ("net/mlx5: cmdif, Avoid skipping reclaim pages if FW is not accessible")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c b/drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c
index e0581c6f9cecd..5df1472fe2be2 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c
@@ -489,9 +489,12 @@ static int reclaim_pages_cmd(struct mlx5_core_dev *dev,
 	u32 func_id;
 	u32 npages;
 	u32 i = 0;
+	int err;
 
-	if (!mlx5_cmd_is_down(dev))
-		return mlx5_cmd_do(dev, in, in_size, out, out_size);
+	err = mlx5_cmd_do(dev, in, in_size, out, out_size);
+	/* If FW is gone (-ENXIO), proceed to forceful reclaim */
+	if (err != -ENXIO)
+		return err;
 
 	/* No hard feelings, we want our pages back! */
 	npages = MLX5_GET(manage_pages_in, in, input_num_entries);
-- 
2.51.0

[PATCH 6.6 164/196] net/mlx5: fw reset, add reset timeout work

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Moshe Shemesh <moshe@nvidia.com>

[ Upstream commit 5cfbe7ebfa42fd3c517a701dab5bd73524da9088 ]

Add sync reset timeout to stop poll_sync_reset in case there was no
reset done or abort event within timeout. Otherwise poll sync reset will
just continue and in case of fw fatal error no health reporting will be
done.

Fixes: 38b9f903f22b ("net/mlx5: Handle sync reset request event")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../ethernet/mellanox/mlx5/core/fw_reset.c    | 24 +++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c b/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c
index 1547704c89767..4d64d179b5dd7 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c
@@ -27,6 +27,7 @@ struct mlx5_fw_reset {
 	struct work_struct reset_reload_work;
 	struct work_struct reset_now_work;
 	struct work_struct reset_abort_work;
+	struct delayed_work reset_timeout_work;
 	unsigned long reset_flags;
 	u8 reset_method;
 	struct timer_list timer;
@@ -257,6 +258,8 @@ static int mlx5_sync_reset_clear_reset_requested(struct mlx5_core_dev *dev, bool
 		return -EALREADY;
 	}
 
+	if (current_work() != &fw_reset->reset_timeout_work.work)
+		cancel_delayed_work(&fw_reset->reset_timeout_work);
 	mlx5_stop_sync_reset_poll(dev);
 	if (poll_health)
 		mlx5_start_health_poll(dev);
@@ -327,6 +330,11 @@ static int mlx5_sync_reset_set_reset_requested(struct mlx5_core_dev *dev)
 	}
 	mlx5_stop_health_poll(dev, true);
 	mlx5_start_sync_reset_poll(dev);
+
+	if (!test_bit(MLX5_FW_RESET_FLAGS_DROP_NEW_REQUESTS,
+		      &fw_reset->reset_flags))
+		schedule_delayed_work(&fw_reset->reset_timeout_work,
+			msecs_to_jiffies(mlx5_tout_ms(dev, PCI_SYNC_UPDATE)));
 	return 0;
 }
 
@@ -700,6 +708,19 @@ static void mlx5_sync_reset_events_handle(struct mlx5_fw_reset *fw_reset, struct
 	}
 }
 
+static void mlx5_sync_reset_timeout_work(struct work_struct *work)
+{
+	struct delayed_work *dwork = container_of(work, struct delayed_work,
+						  work);
+	struct mlx5_fw_reset *fw_reset =
+		container_of(dwork, struct mlx5_fw_reset, reset_timeout_work);
+	struct mlx5_core_dev *dev = fw_reset->dev;
+
+	if (mlx5_sync_reset_clear_reset_requested(dev, true))
+		return;
+	mlx5_core_warn(dev, "PCI Sync FW Update Reset Timeout.\n");
+}
+
 static int fw_reset_event_notifier(struct notifier_block *nb, unsigned long action, void *data)
 {
 	struct mlx5_fw_reset *fw_reset = mlx5_nb_cof(nb, struct mlx5_fw_reset, nb);
@@ -783,6 +804,7 @@ void mlx5_drain_fw_reset(struct mlx5_core_dev *dev)
 	cancel_work_sync(&fw_reset->reset_reload_work);
 	cancel_work_sync(&fw_reset->reset_now_work);
 	cancel_work_sync(&fw_reset->reset_abort_work);
+	cancel_delayed_work(&fw_reset->reset_timeout_work);
 }
 
 static const struct devlink_param mlx5_fw_reset_devlink_params[] = {
@@ -826,6 +848,8 @@ int mlx5_fw_reset_init(struct mlx5_core_dev *dev)
 	INIT_WORK(&fw_reset->reset_reload_work, mlx5_sync_reset_reload_work);
 	INIT_WORK(&fw_reset->reset_now_work, mlx5_sync_reset_now_event);
 	INIT_WORK(&fw_reset->reset_abort_work, mlx5_sync_reset_abort_event);
+	INIT_DELAYED_WORK(&fw_reset->reset_timeout_work,
+			  mlx5_sync_reset_timeout_work);
 
 	init_completion(&fw_reset->done);
 	return 0;
-- 
2.51.0

[PATCH 6.6 165/196] smb: client: fix crypto buffers in non-linear memory

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Enzo Matsumiya <ematsumiya@suse.de>

[ Upstream commit 998a67b954680f26f3734040aeeed08642d49721 ]

The crypto API, through the scatterlist API, expects input buffers to be
in linear memory.  We handle this with the cifs_sg_set_buf() helper
that converts vmalloc'd memory to their corresponding pages.

However, when we allocate our aead_request buffer (@creq in
smb2ops.c::crypt_message()), we do so with kvzalloc(), which possibly
puts aead_request->__ctx in vmalloc area.

AEAD algorithm then uses ->__ctx for its private/internal data and
operations, and uses sg_set_buf() for such data on a few places.

This works fine as long as @creq falls into kmalloc zone (small
requests) or vmalloc'd memory is still within linear range.

Tasks' stacks are vmalloc'd by default (CONFIG_VMAP_STACK=y), so too
many tasks will increment the base stacks' addresses to a point where
virt_addr_valid(buf) will fail (BUG() in sg_set_buf()) when that
happens.

In practice: too many parallel reads and writes on an encrypted mount
will trigger this bug.

To fix this, always alloc @creq with kmalloc() instead.
Also drop the @sensitive_size variable/arguments since
kfree_sensitive() doesn't need it.

Backtrace:

[  945.272081] ------------[ cut here ]------------
[  945.272774] kernel BUG at include/linux/scatterlist.h:209!
[  945.273520] Oops: invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC NOPTI
[  945.274412] CPU: 7 UID: 0 PID: 56 Comm: kworker/u33:0 Kdump: loaded Not tainted 6.15.0-lku-11779-g8e9d6efccdd7-dirty #1 PREEMPT(voluntary)
[  945.275736] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-2-gc13ff2cd-prebuilt.qemu.org 04/01/2014
[  945.276877] Workqueue: writeback wb_workfn (flush-cifs-2)
[  945.277457] RIP: 0010:crypto_gcm_init_common+0x1f9/0x220
[  945.278018] Code: b0 00 00 00 48 83 c4 08 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc 48 c7 c0 00 00 00 80 48 2b 05 5c 58 e5 00 e9 58 ff ff ff <0f> 0b 0f 0b 0f 0b 0f 0b 0f 0b 0f 0b 48 c7 04 24 01 00 00 00 48 8b
[  945.279992] RSP: 0018:ffffc90000a27360 EFLAGS: 00010246
[  945.280578] RAX: 0000000000000000 RBX: ffffc90001d85060 RCX: 0000000000000030
[  945.281376] RDX: 0000000000080000 RSI: 0000000000000000 RDI: ffffc90081d85070
[  945.282145] RBP: ffffc90001d85010 R08: ffffc90001d85000 R09: 0000000000000000
[  945.282898] R10: ffffc90001d85090 R11: 0000000000001000 R12: ffffc90001d85070
[  945.283656] R13: ffff888113522948 R14: ffffc90001d85060 R15: ffffc90001d85010
[  945.284407] FS:  0000000000000000(0000) GS:ffff8882e66cf000(0000) knlGS:0000000000000000
[  945.285262] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  945.285884] CR2: 00007fa7ffdd31f4 CR3: 000000010540d000 CR4: 0000000000350ef0
[  945.286683] Call Trace:
[  945.286952]  <TASK>
[  945.287184]  ? crypt_message+0x33f/0xad0 [cifs]
[  945.287719]  crypto_gcm_encrypt+0x36/0xe0
[  945.288152]  crypt_message+0x54a/0xad0 [cifs]
[  945.288724]  smb3_init_transform_rq+0x277/0x300 [cifs]
[  945.289300]  smb_send_rqst+0xa3/0x160 [cifs]
[  945.289944]  cifs_call_async+0x178/0x340 [cifs]
[  945.290514]  ? __pfx_smb2_writev_callback+0x10/0x10 [cifs]
[  945.291177]  smb2_async_writev+0x3e3/0x670 [cifs]
[  945.291759]  ? find_held_lock+0x32/0x90
[  945.292212]  ? netfs_advance_write+0xf2/0x310
[  945.292723]  netfs_advance_write+0xf2/0x310
[  945.293210]  netfs_write_folio+0x346/0xcc0
[  945.293689]  ? __pfx__raw_spin_unlock_irq+0x10/0x10
[  945.294250]  netfs_writepages+0x117/0x460
[  945.294724]  do_writepages+0xbe/0x170
[  945.295152]  ? find_held_lock+0x32/0x90
[  945.295600]  ? kvm_sched_clock_read+0x11/0x20
[  945.296103]  __writeback_single_inode+0x56/0x4b0
[  945.296643]  writeback_sb_inodes+0x229/0x550
[  945.297140]  __writeback_inodes_wb+0x4c/0xe0
[  945.297642]  wb_writeback+0x2f1/0x3f0
[  945.298069]  wb_workfn+0x300/0x490
[  945.298472]  process_one_work+0x1fe/0x590
[  945.298949]  worker_thread+0x1ce/0x3c0
[  945.299397]  ? __pfx_worker_thread+0x10/0x10
[  945.299900]  kthread+0x119/0x210
[  945.300285]  ? __pfx_kthread+0x10/0x10
[  945.300729]  ret_from_fork+0x119/0x1b0
[  945.301163]  ? __pfx_kthread+0x10/0x10
[  945.301601]  ret_from_fork_asm+0x1a/0x30
[  945.302055]  </TASK>

Fixes: d08089f649a0 ("cifs: Change the I/O paths to use an iterator rather than a page list")
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/smb/client/smb2ops.c | 17 ++++++-----------
 1 file changed, 6 insertions(+), 11 deletions(-)

diff --git a/fs/smb/client/smb2ops.c b/fs/smb/client/smb2ops.c
index b74f769047394..ee6a6ba13f89c 100644
--- a/fs/smb/client/smb2ops.c
+++ b/fs/smb/client/smb2ops.c
@@ -4152,7 +4152,7 @@ fill_transform_hdr(struct smb2_transform_hdr *tr_hdr, unsigned int orig_len,
 static void *smb2_aead_req_alloc(struct crypto_aead *tfm, const struct smb_rqst *rqst,
 				 int num_rqst, const u8 *sig, u8 **iv,
 				 struct aead_request **req, struct sg_table *sgt,
-				 unsigned int *num_sgs, size_t *sensitive_size)
+				 unsigned int *num_sgs)
 {
 	unsigned int req_size = sizeof(**req) + crypto_aead_reqsize(tfm);
 	unsigned int iv_size = crypto_aead_ivsize(tfm);
@@ -4169,9 +4169,8 @@ static void *smb2_aead_req_alloc(struct crypto_aead *tfm, const struct smb_rqst
 	len += req_size;
 	len = ALIGN(len, __alignof__(struct scatterlist));
 	len += array_size(*num_sgs, sizeof(struct scatterlist));
-	*sensitive_size = len;
 
-	p = kvzalloc(len, GFP_NOFS);
+	p = kzalloc(len, GFP_NOFS);
 	if (!p)
 		return ERR_PTR(-ENOMEM);
 
@@ -4185,16 +4184,14 @@ static void *smb2_aead_req_alloc(struct crypto_aead *tfm, const struct smb_rqst
 
 static void *smb2_get_aead_req(struct crypto_aead *tfm, struct smb_rqst *rqst,
 			       int num_rqst, const u8 *sig, u8 **iv,
-			       struct aead_request **req, struct scatterlist **sgl,
-			       size_t *sensitive_size)
+			       struct aead_request **req, struct scatterlist **sgl)
 {
 	struct sg_table sgtable = {};
 	unsigned int skip, num_sgs, i, j;
 	ssize_t rc;
 	void *p;
 
-	p = smb2_aead_req_alloc(tfm, rqst, num_rqst, sig, iv, req, &sgtable,
-				&num_sgs, sensitive_size);
+	p = smb2_aead_req_alloc(tfm, rqst, num_rqst, sig, iv, req, &sgtable, &num_sgs);
 	if (IS_ERR(p))
 		return ERR_CAST(p);
 
@@ -4283,7 +4280,6 @@ crypt_message(struct TCP_Server_Info *server, int num_rqst,
 	DECLARE_CRYPTO_WAIT(wait);
 	unsigned int crypt_len = le32_to_cpu(tr_hdr->OriginalMessageSize);
 	void *creq;
-	size_t sensitive_size;
 
 	rc = smb2_get_enc_key(server, le64_to_cpu(tr_hdr->SessionId), enc, key);
 	if (rc) {
@@ -4309,8 +4305,7 @@ crypt_message(struct TCP_Server_Info *server, int num_rqst,
 		return rc;
 	}
 
-	creq = smb2_get_aead_req(tfm, rqst, num_rqst, sign, &iv, &req, &sg,
-				 &sensitive_size);
+	creq = smb2_get_aead_req(tfm, rqst, num_rqst, sign, &iv, &req, &sg);
 	if (IS_ERR(creq))
 		return PTR_ERR(creq);
 
@@ -4340,7 +4335,7 @@ crypt_message(struct TCP_Server_Info *server, int num_rqst,
 	if (!rc && enc)
 		memcpy(&tr_hdr->Signature, sign, SMB2_SIGNATURE_SIZE);
 
-	kvfree_sensitive(creq, sensitive_size);
+	kfree_sensitive(creq);
 	return rc;
 }
 
-- 
2.51.0

[PATCH 6.6 166/196] Revert "net/mlx5e: Update and set Xon/Xoff upon MTU set"

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jakub Kicinski <kuba@kernel.org>

[ Upstream commit 6f5dacf88a32b3fd8b52c8ea781bf188c42aaa95 ]

This reverts commit ceddedc969f0532b7c62ca971ee50d519d2bc0cb.

Commit in question breaks the mapping of PGs to pools for some SKUs.
Specifically multi-host NICs seem to be shipped with a custom buffer
configuration which maps the lossy PG to pool 4. But the bad commit
overrides this with pool 0 which does not have sufficient buffer space
reserved. Resulting in ~40% packet loss. The commit also breaks BMC /
OOB connection completely (100% packet loss).

Revert, similarly to commit 3fbfe251cc9f ("Revert "net/mlx5e: Update and
set Xon/Xoff upon port speed set""). The breakage is exactly the same,
the only difference is that quoted commit would break the NIC immediately
on boot, and the currently reverted commit only when MTU is changed.

Note: "good" kernels do not restore the configuration, so downgrade isn't
enough to recover machines. A NIC power cycle seems to be necessary to
return to a healthy state (or overriding the relevant registers using
a custom patch).

Fixes: ceddedc969f0 ("net/mlx5e: Update and set Xon/Xoff upon MTU set")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250929181529.1848157-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../mellanox/mlx5/core/en/port_buffer.h         | 12 ------------
 .../net/ethernet/mellanox/mlx5/core/en_main.c   | 17 +----------------
 2 files changed, 1 insertion(+), 28 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/port_buffer.h b/drivers/net/ethernet/mellanox/mlx5/core/en/port_buffer.h
index 66d276a1be836..f4a19ffbb641c 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/port_buffer.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/port_buffer.h
@@ -66,23 +66,11 @@ struct mlx5e_port_buffer {
 	struct mlx5e_bufferx_reg  buffer[MLX5E_MAX_NETWORK_BUFFER];
 };
 
-#ifdef CONFIG_MLX5_CORE_EN_DCB
 int mlx5e_port_manual_buffer_config(struct mlx5e_priv *priv,
 				    u32 change, unsigned int mtu,
 				    struct ieee_pfc *pfc,
 				    u32 *buffer_size,
 				    u8 *prio2buffer);
-#else
-static inline int
-mlx5e_port_manual_buffer_config(struct mlx5e_priv *priv,
-				u32 change, unsigned int mtu,
-				void *pfc,
-				u32 *buffer_size,
-				u8 *prio2buffer)
-{
-	return 0;
-}
-#endif
 
 int mlx5e_port_query_buffer(struct mlx5e_priv *priv,
 			    struct mlx5e_port_buffer *port_buffer);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index 09ba60b2e744b..5c6f01abdcb91 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -44,7 +44,6 @@
 #include "eswitch.h"
 #include "en.h"
 #include "en/txrx.h"
-#include "en/port_buffer.h"
 #include "en_tc.h"
 #include "en_rep.h"
 #include "en_accel/ipsec.h"
@@ -2723,11 +2722,9 @@ int mlx5e_set_dev_port_mtu(struct mlx5e_priv *priv)
 	struct mlx5e_params *params = &priv->channels.params;
 	struct net_device *netdev = priv->netdev;
 	struct mlx5_core_dev *mdev = priv->mdev;
-	u16 mtu, prev_mtu;
+	u16 mtu;
 	int err;
 
-	mlx5e_query_mtu(mdev, params, &prev_mtu);
-
 	err = mlx5e_set_mtu(mdev, params, params->sw_mtu);
 	if (err)
 		return err;
@@ -2737,18 +2734,6 @@ int mlx5e_set_dev_port_mtu(struct mlx5e_priv *priv)
 		netdev_warn(netdev, "%s: VPort MTU %d is different than netdev mtu %d\n",
 			    __func__, mtu, params->sw_mtu);
 
-	if (mtu != prev_mtu && MLX5_BUFFER_SUPPORTED(mdev)) {
-		err = mlx5e_port_manual_buffer_config(priv, 0, mtu,
-						      NULL, NULL, NULL);
-		if (err) {
-			netdev_warn(netdev, "%s: Failed to set Xon/Xoff values with MTU %d (err %d), setting back to previous MTU %d\n",
-				    __func__, mtu, err, prev_mtu);
-
-			mlx5e_set_mtu(mdev, params, prev_mtu);
-			return err;
-		}
-	}
-
 	params->sw_mtu = mtu;
 	return 0;
 }
-- 
2.51.0

[PATCH 6.6 167/196] vhost: vringh: Modify the return value check

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: zhang jiao <zhangjiao2@cmss.chinamobile.com>

[ Upstream commit 82a8d0fda55b35361ee7f35b54fa2b66d7847d2b ]

The return value of copy_from_iter and copy_to_iter can't be negative,
check whether the copied lengths are equal.

Fixes: 309bba39c945 ("vringh: iterate on iotlb_translate to handle large translations")
Cc: "Stefano Garzarella" <sgarzare@redhat.com>
Signed-off-by: zhang jiao <zhangjiao2@cmss.chinamobile.com>
Message-Id: <20250910091739.2999-1-zhangjiao2@cmss.chinamobile.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vhost/vringh.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/vhost/vringh.c b/drivers/vhost/vringh.c
index 60961c65fd472..134cc10af776b 100644
--- a/drivers/vhost/vringh.c
+++ b/drivers/vhost/vringh.c
@@ -1191,6 +1191,7 @@ static inline int copy_from_iotlb(const struct vringh *vrh, void *dst,
 		struct iov_iter iter;
 		u64 translated;
 		int ret;
+		size_t size;
 
 		ret = iotlb_translate(vrh, (u64)(uintptr_t)src,
 				      len - total_translated, &translated,
@@ -1208,9 +1209,9 @@ static inline int copy_from_iotlb(const struct vringh *vrh, void *dst,
 				      translated);
 		}
 
-		ret = copy_from_iter(dst, translated, &iter);
-		if (ret < 0)
-			return ret;
+		size = copy_from_iter(dst, translated, &iter);
+		if (size != translated)
+			return -EFAULT;
 
 		src += translated;
 		dst += translated;
-- 
2.51.0

[PATCH 6.6 168/196] bpf: Reject negative offsets for ALU ops

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yazhou Tang <tangyazhou518@outlook.com>

[ Upstream commit 55c0ced59fe17dee34e9dfd5f7be63cbab207758 ]

When verifying BPF programs, the check_alu_op() function validates
instructions with ALU operations. The 'offset' field in these
instructions is a signed 16-bit integer.

The existing check 'insn->off > 1' was intended to ensure the offset is
either 0, or 1 for BPF_MOD/BPF_DIV. However, because 'insn->off' is
signed, this check incorrectly accepts all negative values (e.g., -1).

This commit tightens the validation by changing the condition to
'(insn->off != 0 && insn->off != 1)'. This ensures that any value
other than the explicitly permitted 0 and 1 is rejected, hardening the
verifier against malformed BPF programs.

Co-developed-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Signed-off-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Co-developed-by: Tianci Cao <ziye@zju.edu.cn>
Signed-off-by: Tianci Cao <ziye@zju.edu.cn>
Signed-off-by: Yazhou Tang <tangyazhou518@outlook.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Fixes: ec0e2da95f72 ("bpf: Support new signed div/mod instructions.")
Link: https://lore.kernel.org/r/tencent_70D024BAE70A0A309A4781694C7B764B0608@qq.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/verifier.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index a6f825b7fbe6c..5e644b1b12aaa 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -13727,7 +13727,7 @@ static int check_alu_op(struct bpf_verifier_env *env, struct bpf_insn *insn)
 	} else {	/* all other ALU ops: and, sub, xor, add, ... */
 
 		if (BPF_SRC(insn->code) == BPF_X) {
-			if (insn->imm != 0 || insn->off > 1 ||
+			if (insn->imm != 0 || (insn->off != 0 && insn->off != 1) ||
 			    (insn->off == 1 && opcode != BPF_MOD && opcode != BPF_DIV)) {
 				verbose(env, "BPF_ALU uses reserved fields\n");
 				return -EINVAL;
@@ -13737,7 +13737,7 @@ static int check_alu_op(struct bpf_verifier_env *env, struct bpf_insn *insn)
 			if (err)
 				return err;
 		} else {
-			if (insn->src_reg != BPF_REG_0 || insn->off > 1 ||
+			if (insn->src_reg != BPF_REG_0 || (insn->off != 0 && insn->off != 1) ||
 			    (insn->off == 1 && opcode != BPF_MOD && opcode != BPF_DIV)) {
 				verbose(env, "BPF_ALU uses reserved fields\n");
 				return -EINVAL;
-- 
2.51.0

[PATCH 6.6 169/196] Squashfs: fix uninit-value in squashfs_get_parent

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Phillip Lougher <phillip@squashfs.org.uk>

commit 74058c0a9fc8b2b4d5f4a0ef7ee2cfa66a9e49cf upstream.

Syzkaller reports a "KMSAN: uninit-value in squashfs_get_parent" bug.

This is caused by open_by_handle_at() being called with a file handle
containing an invalid parent inode number.  In particular the inode number
is that of a symbolic link, rather than a directory.

Squashfs_get_parent() gets called with that symbolic link inode, and
accesses the parent member field.

	unsigned int parent_ino = squashfs_i(inode)->parent;

Because non-directory inodes in Squashfs do not have a parent value, this
is uninitialised, and this causes an uninitialised value access.

The fix is to initialise parent with the invalid inode 0, which will cause
an EINVAL error to be returned.

Regular inodes used to share the parent field with the block_list_start
field.  This is removed in this commit to enable the parent field to
contain the invalid inode number 0.

Link: https://lkml.kernel.org/r/20250918233308.293861-1-phillip@squashfs.org.uk
Fixes: 122601408d20 ("Squashfs: export operations")
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Reported-by: syzbot+157bdef5cf596ad0da2c@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68cc2431.050a0220.139b6.0001.GAE@google.com/
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/squashfs/inode.c         |    7 +++++++
 fs/squashfs/squashfs_fs_i.h |    2 +-
 2 files changed, 8 insertions(+), 1 deletion(-)

--- a/fs/squashfs/inode.c
+++ b/fs/squashfs/inode.c
@@ -165,6 +165,7 @@ int squashfs_read_inode(struct inode *in
 		squashfs_i(inode)->start = le32_to_cpu(sqsh_ino->start_block);
 		squashfs_i(inode)->block_list_start = block;
 		squashfs_i(inode)->offset = offset;
+		squashfs_i(inode)->parent = 0;
 		inode->i_data.a_ops = &squashfs_aops;
 
 		TRACE("File inode %x:%x, start_block %llx, block_list_start "
@@ -212,6 +213,7 @@ int squashfs_read_inode(struct inode *in
 		squashfs_i(inode)->start = le64_to_cpu(sqsh_ino->start_block);
 		squashfs_i(inode)->block_list_start = block;
 		squashfs_i(inode)->offset = offset;
+		squashfs_i(inode)->parent = 0;
 		inode->i_data.a_ops = &squashfs_aops;
 
 		TRACE("File inode %x:%x, start_block %llx, block_list_start "
@@ -292,6 +294,7 @@ int squashfs_read_inode(struct inode *in
 		inode->i_mode |= S_IFLNK;
 		squashfs_i(inode)->start = block;
 		squashfs_i(inode)->offset = offset;
+		squashfs_i(inode)->parent = 0;
 
 		if (type == SQUASHFS_LSYMLINK_TYPE) {
 			__le32 xattr;
@@ -329,6 +332,7 @@ int squashfs_read_inode(struct inode *in
 		set_nlink(inode, le32_to_cpu(sqsh_ino->nlink));
 		rdev = le32_to_cpu(sqsh_ino->rdev);
 		init_special_inode(inode, inode->i_mode, new_decode_dev(rdev));
+		squashfs_i(inode)->parent = 0;
 
 		TRACE("Device inode %x:%x, rdev %x\n",
 				SQUASHFS_INODE_BLK(ino), offset, rdev);
@@ -353,6 +357,7 @@ int squashfs_read_inode(struct inode *in
 		set_nlink(inode, le32_to_cpu(sqsh_ino->nlink));
 		rdev = le32_to_cpu(sqsh_ino->rdev);
 		init_special_inode(inode, inode->i_mode, new_decode_dev(rdev));
+		squashfs_i(inode)->parent = 0;
 
 		TRACE("Device inode %x:%x, rdev %x\n",
 				SQUASHFS_INODE_BLK(ino), offset, rdev);
@@ -373,6 +378,7 @@ int squashfs_read_inode(struct inode *in
 			inode->i_mode |= S_IFSOCK;
 		set_nlink(inode, le32_to_cpu(sqsh_ino->nlink));
 		init_special_inode(inode, inode->i_mode, 0);
+		squashfs_i(inode)->parent = 0;
 		break;
 	}
 	case SQUASHFS_LFIFO_TYPE:
@@ -392,6 +398,7 @@ int squashfs_read_inode(struct inode *in
 		inode->i_op = &squashfs_inode_ops;
 		set_nlink(inode, le32_to_cpu(sqsh_ino->nlink));
 		init_special_inode(inode, inode->i_mode, 0);
+		squashfs_i(inode)->parent = 0;
 		break;
 	}
 	default:
--- a/fs/squashfs/squashfs_fs_i.h
+++ b/fs/squashfs/squashfs_fs_i.h
@@ -16,6 +16,7 @@ struct squashfs_inode_info {
 	u64		xattr;
 	unsigned int	xattr_size;
 	int		xattr_count;
+	int		parent;
 	union {
 		struct {
 			u64		fragment_block;
@@ -27,7 +28,6 @@ struct squashfs_inode_info {
 			u64		dir_idx_start;
 			int		dir_idx_offset;
 			int		dir_idx_cnt;
-			int		parent;
 		};
 	};
 	struct inode	vfs_inode;

[PATCH 6.6 170/196] uio_hv_generic: Let userspace take care of interrupt mask

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Naman Jain <namjain@linux.microsoft.com>

commit b15b7d2a1b09ef5428a8db260251897405a19496 upstream.

Remove the logic to set interrupt mask by default in uio_hv_generic
driver as the interrupt mask value is supposed to be controlled
completely by the user space. If the mask bit gets changed
by the driver, concurrently with user mode operating on the ring,
the mask bit may be set when it is supposed to be clear, and the
user-mode driver will miss an interrupt which will cause a hang.

For eg- when the driver sets inbound ring buffer interrupt mask to 1,
the host does not interrupt the guest on the UIO VMBus channel.
However, setting the mask does not prevent the host from putting a
message in the inbound ring buffer. So let’s assume that happens,
the host puts a message into the ring buffer but does not interrupt.

Subsequently, the user space code in the guest sets the inbound ring
buffer interrupt mask to 0, saying “Hey, I’m ready for interrupts”.
User space code then calls pread() to wait for an interrupt.
Then one of two things happens:

* The host never sends another message. So the pread() waits forever.
* The host does send another message. But because there’s already a
  message in the ring buffer, it doesn’t generate an interrupt.
  This is the correct behavior, because the host should only send an
  interrupt when the inbound ring buffer transitions from empty to
  not-empty. Adding an additional message to a ring buffer that is not
  empty is not supposed to generate an interrupt on the guest.
  Since the guest is waiting in pread() and not removing messages from
  the ring buffer, the pread() waits forever.

This could be easily reproduced in hv_fcopy_uio_daemon if we delay
setting interrupt mask to 0.

Similarly if hv_uio_channel_cb() sets the interrupt_mask to 1,
there’s a race condition. Once user space empties the inbound ring
buffer, but before user space sets interrupt_mask to 0, the host could
put another message in the ring buffer but it wouldn’t interrupt.
Then the next pread() would hang.

Fix these by removing all instances where interrupt_mask is changed,
while keeping the one in set_event() unchanged to enable userspace
control the interrupt mask by writing 0/1 to /dev/uioX.

Fixes: 95096f2fbd10 ("uio-hv-generic: new userspace i/o driver for VMBus")
Suggested-by: John Starks <jostarks@microsoft.com>
Signed-off-by: Naman Jain <namjain@linux.microsoft.com>
Cc: stable@vger.kernel.org
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Long Li <longli@microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Tested-by: Tianyu Lan <tiala@microsoft.com>
Link: https://lore.kernel.org/r/20250828044200.492030-1-namjain@linux.microsoft.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/uio/uio_hv_generic.c |    7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

--- a/drivers/uio/uio_hv_generic.c
+++ b/drivers/uio/uio_hv_generic.c
@@ -96,7 +96,6 @@ static void hv_uio_channel_cb(void *cont
 	struct hv_device *hv_dev = chan->device_obj;
 	struct hv_uio_private_data *pdata = hv_get_drvdata(hv_dev);
 
-	chan->inbound.ring_buffer->interrupt_mask = 1;
 	virt_mb();
 
 	uio_event_notify(&pdata->info);
@@ -173,8 +172,6 @@ hv_uio_new_channel(struct vmbus_channel
 		return;
 	}
 
-	/* Disable interrupts on sub channel */
-	new_sc->inbound.ring_buffer->interrupt_mask = 1;
 	set_channel_read_mode(new_sc, HV_CALL_ISR);
 
 	ret = sysfs_create_bin_file(&new_sc->kobj, &ring_buffer_bin_attr);
@@ -218,9 +215,7 @@ hv_uio_open(struct uio_info *info, struc
 
 	ret = vmbus_connect_ring(dev->channel,
 				 hv_uio_channel_cb, dev->channel);
-	if (ret == 0)
-		dev->channel->inbound.ring_buffer->interrupt_mask = 1;
-	else
+	if (ret)
 		atomic_dec(&pdata->refcnt);
 
 	return ret;

[PATCH 6.6 171/196] ASoC: wcd934x: fix error handling in wcd934x_codec_parse_data()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ma Ke <make24@iscas.ac.cn>

commit 4e65bda8273c938039403144730923e77916a3d7 upstream.

wcd934x_codec_parse_data() contains a device reference count leak in
of_slim_get_device() where device_find_child() increases the reference
count of the device but this reference is not properly decreased in
the success path. Add put_device() in wcd934x_codec_parse_data() and
add devm_add_action_or_reset() in the probe function, which ensures
that the reference count of the device is correctly managed.

Memory leak in regmap_init_slimbus() as the allocated regmap is not
released when the device is removed. Using devm_regmap_init_slimbus()
instead of regmap_init_slimbus() to ensure automatic regmap cleanup on
device removal.

Calling path: of_slim_get_device() -> of_find_slim_device() ->
device_find_child(). As comment of device_find_child() says, 'NOTE:
you will need to drop the reference with put_device() after use.'.

Found by code review.

Cc: stable@vger.kernel.org
Fixes: a61f3b4f476e ("ASoC: wcd934x: add support to wcd9340/wcd9341 codec")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20250923065212.26660-1-make24@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/codecs/wcd934x.c |   17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

--- a/sound/soc/codecs/wcd934x.c
+++ b/sound/soc/codecs/wcd934x.c
@@ -5858,6 +5858,13 @@ static const struct snd_soc_component_dr
 	.endianness = 1,
 };
 
+static void wcd934x_put_device_action(void *data)
+{
+	struct device *dev = data;
+
+	put_device(dev);
+}
+
 static int wcd934x_codec_parse_data(struct wcd934x_codec *wcd)
 {
 	struct device *dev = &wcd->sdev->dev;
@@ -5878,11 +5885,13 @@ static int wcd934x_codec_parse_data(stru
 	}
 
 	slim_get_logical_addr(wcd->sidev);
-	wcd->if_regmap = regmap_init_slimbus(wcd->sidev,
+	wcd->if_regmap = devm_regmap_init_slimbus(wcd->sidev,
 				  &wcd934x_ifc_regmap_config);
-	if (IS_ERR(wcd->if_regmap))
+	if (IS_ERR(wcd->if_regmap)) {
+		put_device(&wcd->sidev->dev);
 		return dev_err_probe(dev, PTR_ERR(wcd->if_regmap),
 				     "Failed to allocate ifc register map\n");
+	}
 
 	of_property_read_u32(dev->parent->of_node, "qcom,dmic-sample-rate",
 			     &wcd->dmic_sample_rate);
@@ -5926,6 +5935,10 @@ static int wcd934x_codec_probe(struct pl
 		return ret;
 	}
 
+	ret = devm_add_action_or_reset(dev, wcd934x_put_device_action, &wcd->sidev->dev);
+	if (ret)
+		return ret;
+
 	/* set default rate 9P6MHz */
 	regmap_update_bits(wcd->regmap, WCD934X_CODEC_RPM_CLK_MCLK_CFG,
 			   WCD934X_CODEC_RPM_CLK_MCLK_CFG_MCLK_MASK,

[PATCH 6.6 172/196] ASoC: SOF: ipc3-topology: Fix multi-core and static pipelines tear down

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>

commit 59abe7bc7e7c70e9066b3e46874d1b7e6a13de14 upstream.

In the case of static pipelines, freeing the widgets in the pipelines
that were not suspended after freeing the scheduler widgets results in
errors because the secondary cores are powered off when the scheduler
widgets are freed. Fix this by tearing down the leftover pipelines before
powering off the secondary cores.

Cc: stable@vger.kernel.org
Fixes: d7332c4a4f1a ("ASoC: SOF: ipc3-topology: Fix pipeline tear down logic")
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20251002073125.32471-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/sof/ipc3-topology.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/sound/soc/sof/ipc3-topology.c
+++ b/sound/soc/sof/ipc3-topology.c
@@ -2394,11 +2394,6 @@ static int sof_ipc3_tear_down_all_pipeli
 	if (ret < 0)
 		return ret;
 
-	/* free all the scheduler widgets now */
-	ret = sof_ipc3_free_widgets_in_list(sdev, true, &dyn_widgets, verify);
-	if (ret < 0)
-		return ret;
-
 	/*
 	 * Tear down all pipelines associated with PCMs that did not get suspended
 	 * and unset the prepare flag so that they can be set up again during resume.
@@ -2414,6 +2409,11 @@ static int sof_ipc3_tear_down_all_pipeli
 		}
 	}
 
+	/* free all the scheduler widgets now. This will also power down the secondary cores */
+	ret = sof_ipc3_free_widgets_in_list(sdev, true, &dyn_widgets, verify);
+	if (ret < 0)
+		return ret;
+
 	list_for_each_entry(sroute, &sdev->route_list, list)
 		sroute->setup = false;
 

[PATCH 6.6 173/196] fs: udf: fix OOB read in lengthAllocDescs handling

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Larshin Sergey <Sergey.Larshin@kaspersky.com>

commit 3bd5e45c2ce30e239d596becd5db720f7eb83c99 upstream.

When parsing Allocation Extent Descriptor, lengthAllocDescs comes from
on-disk data and must be validated against the block size. Crafted or
corrupted images may set lengthAllocDescs so that the total descriptor
length (sizeof(allocExtDesc) + lengthAllocDescs) exceeds the buffer,
leading udf_update_tag() to call crc_itu_t() on out-of-bounds memory and
trigger a KASAN use-after-free read.

BUG: KASAN: use-after-free in crc_itu_t+0x1d5/0x2b0 lib/crc-itu-t.c:60
Read of size 1 at addr ffff888041e7d000 by task syz-executor317/5309

CPU: 0 UID: 0 PID: 5309 Comm: syz-executor317 Not tainted 6.12.0-rc4-syzkaller-00261-g850925a8133c #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:94 [inline]
 dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
 print_address_description mm/kasan/report.c:377 [inline]
 print_report+0x169/0x550 mm/kasan/report.c:488
 kasan_report+0x143/0x180 mm/kasan/report.c:601
 crc_itu_t+0x1d5/0x2b0 lib/crc-itu-t.c:60
 udf_update_tag+0x70/0x6a0 fs/udf/misc.c:261
 udf_write_aext+0x4d8/0x7b0 fs/udf/inode.c:2179
 extent_trunc+0x2f7/0x4a0 fs/udf/truncate.c:46
 udf_truncate_tail_extent+0x527/0x7e0 fs/udf/truncate.c:106
 udf_release_file+0xc1/0x120 fs/udf/file.c:185
 __fput+0x23f/0x880 fs/file_table.c:431
 task_work_run+0x24f/0x310 kernel/task_work.c:239
 exit_task_work include/linux/task_work.h:43 [inline]
 do_exit+0xa2f/0x28e0 kernel/exit.c:939
 do_group_exit+0x207/0x2c0 kernel/exit.c:1088
 __do_sys_exit_group kernel/exit.c:1099 [inline]
 __se_sys_exit_group kernel/exit.c:1097 [inline]
 __x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1097
 x64_sys_call+0x2634/0x2640 arch/x86/include/generated/asm/syscalls_64.h:232
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x77/0x7f
 </TASK>

Validate the computed total length against epos->bh->b_size.

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Reported-by: syzbot+8743fca924afed42f93e@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=8743fca924afed42f93e
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Larshin Sergey <Sergey.Larshin@kaspersky.com>
Link: https://patch.msgid.link/20250922131358.745579-1-Sergey.Larshin@kaspersky.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/udf/inode.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/fs/udf/inode.c
+++ b/fs/udf/inode.c
@@ -2265,6 +2265,9 @@ int udf_current_aext(struct inode *inode
 		if (check_add_overflow(sizeof(struct allocExtDesc),
 				le32_to_cpu(header->lengthAllocDescs), &alen))
 			return -1;
+
+		if (alen > epos->bh->b_size)
+			return -1;
 	}
 
 	switch (iinfo->i_alloc_type) {

[PATCH 6.6 174/196] net: nfc: nci: Add parameter validation for packet data

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Deepak Sharma <deepak.sharma.472935@gmail.com>

commit 9c328f54741bd5465ca1dc717c84c04242fac2e1 upstream.

Syzbot reported an uninitialized value bug in nci_init_req, which was
introduced by commit 5aca7966d2a7 ("Merge tag
'perf-tools-fixes-for-v6.17-2025-09-16' of
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools").

This bug arises due to very limited and poor input validation
that was done at nic_valid_size(). This validation only
validates the skb->len (directly reflects size provided at the
userspace interface) with the length provided in the buffer
itself (interpreted as NCI_HEADER). This leads to the processing
of memory content at the address assuming the correct layout
per what opcode requires there. This leads to the accesses to
buffer of `skb_buff->data` which is not assigned anything yet.

Following the same silent drop of packets of invalid sizes at
`nic_valid_size()`, add validation of the data in the respective
handlers and return error values in case of failure. Release
the skb if error values are returned from handlers in
`nci_nft_packet` and effectively do a silent drop

Possible TODO: because we silently drop the packets, the
call to `nci_request` will be waiting for completion of request
and will face timeouts. These timeouts can get excessively logged
in the dmesg. A proper handling of them may require to export
`nci_request_cancel` (or propagate error handling from the
nft packets handlers).

Reported-by: syzbot+740e04c2a93467a0f8c8@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=740e04c2a93467a0f8c8
Fixes: 6a2968aaf50c ("NFC: basic NCI protocol implementation")
Tested-by: syzbot+740e04c2a93467a0f8c8@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Deepak Sharma <deepak.sharma.472935@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250925132846.213425-1-deepak.sharma.472935@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/nfc/nci/ntf.c |  135 +++++++++++++++++++++++++++++++++++++++---------------
 1 file changed, 99 insertions(+), 36 deletions(-)

--- a/net/nfc/nci/ntf.c
+++ b/net/nfc/nci/ntf.c
@@ -27,11 +27,16 @@
 
 /* Handle NCI Notification packets */
 
-static void nci_core_reset_ntf_packet(struct nci_dev *ndev,
-				      const struct sk_buff *skb)
+static int nci_core_reset_ntf_packet(struct nci_dev *ndev,
+				     const struct sk_buff *skb)
 {
 	/* Handle NCI 2.x core reset notification */
-	const struct nci_core_reset_ntf *ntf = (void *)skb->data;
+	const struct nci_core_reset_ntf *ntf;
+
+	if (skb->len < sizeof(struct nci_core_reset_ntf))
+		return -EINVAL;
+
+	ntf = (struct nci_core_reset_ntf *)skb->data;
 
 	ndev->nci_ver = ntf->nci_ver;
 	pr_debug("nci_ver 0x%x, config_status 0x%x\n",
@@ -42,15 +47,22 @@ static void nci_core_reset_ntf_packet(st
 		__le32_to_cpu(ntf->manufact_specific_info);
 
 	nci_req_complete(ndev, NCI_STATUS_OK);
+
+	return 0;
 }
 
-static void nci_core_conn_credits_ntf_packet(struct nci_dev *ndev,
-					     struct sk_buff *skb)
+static int nci_core_conn_credits_ntf_packet(struct nci_dev *ndev,
+					    struct sk_buff *skb)
 {
-	struct nci_core_conn_credit_ntf *ntf = (void *) skb->data;
+	struct nci_core_conn_credit_ntf *ntf;
 	struct nci_conn_info *conn_info;
 	int i;
 
+	if (skb->len < sizeof(struct nci_core_conn_credit_ntf))
+		return -EINVAL;
+
+	ntf = (struct nci_core_conn_credit_ntf *)skb->data;
+
 	pr_debug("num_entries %d\n", ntf->num_entries);
 
 	if (ntf->num_entries > NCI_MAX_NUM_CONN)
@@ -68,7 +80,7 @@ static void nci_core_conn_credits_ntf_pa
 		conn_info = nci_get_conn_info_by_conn_id(ndev,
 							 ntf->conn_entries[i].conn_id);
 		if (!conn_info)
-			return;
+			return 0;
 
 		atomic_add(ntf->conn_entries[i].credits,
 			   &conn_info->credits_cnt);
@@ -77,12 +89,19 @@ static void nci_core_conn_credits_ntf_pa
 	/* trigger the next tx */
 	if (!skb_queue_empty(&ndev->tx_q))
 		queue_work(ndev->tx_wq, &ndev->tx_work);
+
+	return 0;
 }
 
-static void nci_core_generic_error_ntf_packet(struct nci_dev *ndev,
-					      const struct sk_buff *skb)
+static int nci_core_generic_error_ntf_packet(struct nci_dev *ndev,
+					     const struct sk_buff *skb)
 {
-	__u8 status = skb->data[0];
+	__u8 status;
+
+	if (skb->len < 1)
+		return -EINVAL;
+
+	status = skb->data[0];
 
 	pr_debug("status 0x%x\n", status);
 
@@ -91,12 +110,19 @@ static void nci_core_generic_error_ntf_p
 		   (the state remains the same) */
 		nci_req_complete(ndev, status);
 	}
+
+	return 0;
 }
 
-static void nci_core_conn_intf_error_ntf_packet(struct nci_dev *ndev,
-						struct sk_buff *skb)
+static int nci_core_conn_intf_error_ntf_packet(struct nci_dev *ndev,
+					       struct sk_buff *skb)
 {
-	struct nci_core_intf_error_ntf *ntf = (void *) skb->data;
+	struct nci_core_intf_error_ntf *ntf;
+
+	if (skb->len < sizeof(struct nci_core_intf_error_ntf))
+		return -EINVAL;
+
+	ntf = (struct nci_core_intf_error_ntf *)skb->data;
 
 	ntf->conn_id = nci_conn_id(&ntf->conn_id);
 
@@ -105,6 +131,8 @@ static void nci_core_conn_intf_error_ntf
 	/* complete the data exchange transaction, if exists */
 	if (test_bit(NCI_DATA_EXCHANGE, &ndev->flags))
 		nci_data_exchange_complete(ndev, NULL, ntf->conn_id, -EIO);
+
+	return 0;
 }
 
 static const __u8 *
@@ -329,13 +357,18 @@ void nci_clear_target_list(struct nci_de
 	ndev->n_targets = 0;
 }
 
-static void nci_rf_discover_ntf_packet(struct nci_dev *ndev,
-				       const struct sk_buff *skb)
+static int nci_rf_discover_ntf_packet(struct nci_dev *ndev,
+				      const struct sk_buff *skb)
 {
 	struct nci_rf_discover_ntf ntf;
-	const __u8 *data = skb->data;
+	const __u8 *data;
 	bool add_target = true;
 
+	if (skb->len < sizeof(struct nci_rf_discover_ntf))
+		return -EINVAL;
+
+	data = skb->data;
+
 	ntf.rf_discovery_id = *data++;
 	ntf.rf_protocol = *data++;
 	ntf.rf_tech_and_mode = *data++;
@@ -390,6 +423,8 @@ static void nci_rf_discover_ntf_packet(s
 		nfc_targets_found(ndev->nfc_dev, ndev->targets,
 				  ndev->n_targets);
 	}
+
+	return 0;
 }
 
 static int nci_extract_activation_params_iso_dep(struct nci_dev *ndev,
@@ -531,14 +566,19 @@ static int nci_store_general_bytes_nfc_d
 	return NCI_STATUS_OK;
 }
 
-static void nci_rf_intf_activated_ntf_packet(struct nci_dev *ndev,
-					     const struct sk_buff *skb)
+static int nci_rf_intf_activated_ntf_packet(struct nci_dev *ndev,
+					    const struct sk_buff *skb)
 {
 	struct nci_conn_info *conn_info;
 	struct nci_rf_intf_activated_ntf ntf;
-	const __u8 *data = skb->data;
+	const __u8 *data;
 	int err = NCI_STATUS_OK;
 
+	if (skb->len < sizeof(struct nci_rf_intf_activated_ntf))
+		return -EINVAL;
+
+	data = skb->data;
+
 	ntf.rf_discovery_id = *data++;
 	ntf.rf_interface = *data++;
 	ntf.rf_protocol = *data++;
@@ -645,7 +685,7 @@ exit:
 	if (err == NCI_STATUS_OK) {
 		conn_info = ndev->rf_conn_info;
 		if (!conn_info)
-			return;
+			return 0;
 
 		conn_info->max_pkt_payload_len = ntf.max_data_pkt_payload_size;
 		conn_info->initial_num_credits = ntf.initial_num_credits;
@@ -691,19 +731,26 @@ listen:
 				pr_err("error when signaling tm activation\n");
 		}
 	}
+
+	return 0;
 }
 
-static void nci_rf_deactivate_ntf_packet(struct nci_dev *ndev,
-					 const struct sk_buff *skb)
+static int nci_rf_deactivate_ntf_packet(struct nci_dev *ndev,
+					const struct sk_buff *skb)
 {
 	const struct nci_conn_info *conn_info;
-	const struct nci_rf_deactivate_ntf *ntf = (void *)skb->data;
+	const struct nci_rf_deactivate_ntf *ntf;
+
+	if (skb->len < sizeof(struct nci_rf_deactivate_ntf))
+		return -EINVAL;
+
+	ntf = (struct nci_rf_deactivate_ntf *)skb->data;
 
 	pr_debug("entry, type 0x%x, reason 0x%x\n", ntf->type, ntf->reason);
 
 	conn_info = ndev->rf_conn_info;
 	if (!conn_info)
-		return;
+		return 0;
 
 	/* drop tx data queue */
 	skb_queue_purge(&ndev->tx_q);
@@ -735,14 +782,20 @@ static void nci_rf_deactivate_ntf_packet
 	}
 
 	nci_req_complete(ndev, NCI_STATUS_OK);
+
+	return 0;
 }
 
-static void nci_nfcee_discover_ntf_packet(struct nci_dev *ndev,
-					  const struct sk_buff *skb)
+static int nci_nfcee_discover_ntf_packet(struct nci_dev *ndev,
+					 const struct sk_buff *skb)
 {
 	u8 status = NCI_STATUS_OK;
-	const struct nci_nfcee_discover_ntf *nfcee_ntf =
-				(struct nci_nfcee_discover_ntf *)skb->data;
+	const struct nci_nfcee_discover_ntf *nfcee_ntf;
+
+	if (skb->len < sizeof(struct nci_nfcee_discover_ntf))
+		return -EINVAL;
+
+	nfcee_ntf = (struct nci_nfcee_discover_ntf *)skb->data;
 
 	/* NFCForum NCI 9.2.1 HCI Network Specific Handling
 	 * If the NFCC supports the HCI Network, it SHALL return one,
@@ -753,6 +806,8 @@ static void nci_nfcee_discover_ntf_packe
 	ndev->cur_params.id = nfcee_ntf->nfcee_id;
 
 	nci_req_complete(ndev, status);
+
+	return 0;
 }
 
 void nci_ntf_packet(struct nci_dev *ndev, struct sk_buff *skb)
@@ -779,35 +834,43 @@ void nci_ntf_packet(struct nci_dev *ndev
 
 	switch (ntf_opcode) {
 	case NCI_OP_CORE_RESET_NTF:
-		nci_core_reset_ntf_packet(ndev, skb);
+		if (nci_core_reset_ntf_packet(ndev, skb))
+			goto end;
 		break;
 
 	case NCI_OP_CORE_CONN_CREDITS_NTF:
-		nci_core_conn_credits_ntf_packet(ndev, skb);
+		if (nci_core_conn_credits_ntf_packet(ndev, skb))
+			goto end;
 		break;
 
 	case NCI_OP_CORE_GENERIC_ERROR_NTF:
-		nci_core_generic_error_ntf_packet(ndev, skb);
+		if (nci_core_generic_error_ntf_packet(ndev, skb))
+			goto end;
 		break;
 
 	case NCI_OP_CORE_INTF_ERROR_NTF:
-		nci_core_conn_intf_error_ntf_packet(ndev, skb);
+		if (nci_core_conn_intf_error_ntf_packet(ndev, skb))
+			goto end;
 		break;
 
 	case NCI_OP_RF_DISCOVER_NTF:
-		nci_rf_discover_ntf_packet(ndev, skb);
+		if (nci_rf_discover_ntf_packet(ndev, skb))
+			goto end;
 		break;
 
 	case NCI_OP_RF_INTF_ACTIVATED_NTF:
-		nci_rf_intf_activated_ntf_packet(ndev, skb);
+		if (nci_rf_intf_activated_ntf_packet(ndev, skb))
+			goto end;
 		break;
 
 	case NCI_OP_RF_DEACTIVATE_NTF:
-		nci_rf_deactivate_ntf_packet(ndev, skb);
+		if (nci_rf_deactivate_ntf_packet(ndev, skb))
+			goto end;
 		break;
 
 	case NCI_OP_NFCEE_DISCOVER_NTF:
-		nci_nfcee_discover_ntf_packet(ndev, skb);
+		if (nci_nfcee_discover_ntf_packet(ndev, skb))
+			goto end;
 		break;
 
 	case NCI_OP_RF_NFCEE_ACTION_NTF:

[PATCH 6.6 175/196] mfd: rz-mtu3: Fix MTU5 NFCR register offset

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>

commit da32b0e82c523b76265ba1ad25d7ea74f0ece402 upstream.

The NFCR register for MTU5 is at 0x1a95 offset according to Datasheet
Page 725, Table 16.4. The address of all registers is offset by 0x1200,
making the proper address of MTU5 NFCR register be 0x895.

Cc: stable@vger.kernel.org
Fixes: 654c293e1687 ("mfd: Add Renesas RZ/G2L MTU3a core driver")
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250910175914.12956-1-cosmin-gabriel.tanislav.xa@renesas.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mfd/rz-mtu3.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mfd/rz-mtu3.c b/drivers/mfd/rz-mtu3.c
index f3dac4a29a83..9cdfef610398 100644
--- a/drivers/mfd/rz-mtu3.c
+++ b/drivers/mfd/rz-mtu3.c
@@ -32,7 +32,7 @@ static const unsigned long rz_mtu3_8bit_ch_reg_offs[][13] = {
 	[RZ_MTU3_CHAN_2] = MTU_8BIT_CH_1_2(0x204, 0x092, 0x205, 0x200, 0x20c, 0x201, 0x202),
 	[RZ_MTU3_CHAN_3] = MTU_8BIT_CH_3_4_6_7(0x008, 0x093, 0x02c, 0x000, 0x04c, 0x002, 0x004, 0x005, 0x038),
 	[RZ_MTU3_CHAN_4] = MTU_8BIT_CH_3_4_6_7(0x009, 0x094, 0x02d, 0x001, 0x04d, 0x003, 0x006, 0x007, 0x039),
-	[RZ_MTU3_CHAN_5] = MTU_8BIT_CH_5(0xab2, 0x1eb, 0xab4, 0xab6, 0xa84, 0xa85, 0xa86, 0xa94, 0xa95, 0xa96, 0xaa4, 0xaa5, 0xaa6),
+	[RZ_MTU3_CHAN_5] = MTU_8BIT_CH_5(0xab2, 0x895, 0xab4, 0xab6, 0xa84, 0xa85, 0xa86, 0xa94, 0xa95, 0xa96, 0xaa4, 0xaa5, 0xaa6),
 	[RZ_MTU3_CHAN_6] = MTU_8BIT_CH_3_4_6_7(0x808, 0x893, 0x82c, 0x800, 0x84c, 0x802, 0x804, 0x805, 0x838),
 	[RZ_MTU3_CHAN_7] = MTU_8BIT_CH_3_4_6_7(0x809, 0x894, 0x82d, 0x801, 0x84d, 0x803, 0x806, 0x807, 0x839),
 	[RZ_MTU3_CHAN_8] = MTU_8BIT_CH_8(0x404, 0x098, 0x400, 0x406, 0x401, 0x402, 0x403)
-- 
2.51.0

[PATCH 6.6 176/196] mfd: vexpress-sysreg: Check the return value of devm_gpiochip_add_data()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

commit 1efbee6852f1ff698a9981bd731308dd027189fb upstream.

Commit 974cc7b93441 ("mfd: vexpress: Define the device as MFD cells")
removed the return value check from the call to gpiochip_add_data() (or
rather gpiochip_add() back then and later converted to devres) with no
explanation. This function however can still fail, so check the return
value and bail-out if it does.

Cc: stable@vger.kernel.org
Fixes: 974cc7b93441 ("mfd: vexpress: Define the device as MFD cells")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250811-gpio-mmio-mfd-conv-v1-1-68c5c958cf80@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mfd/vexpress-sysreg.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/drivers/mfd/vexpress-sysreg.c
+++ b/drivers/mfd/vexpress-sysreg.c
@@ -90,6 +90,7 @@ static int vexpress_sysreg_probe(struct
 	struct resource *mem;
 	void __iomem *base;
 	struct gpio_chip *mmc_gpio_chip;
+	int ret;
 
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!mem)
@@ -110,7 +111,10 @@ static int vexpress_sysreg_probe(struct
 	bgpio_init(mmc_gpio_chip, &pdev->dev, 0x4, base + SYS_MCI,
 			NULL, NULL, NULL, NULL, 0);
 	mmc_gpio_chip->ngpio = 2;
-	devm_gpiochip_add_data(&pdev->dev, mmc_gpio_chip, NULL);
+
+	ret = devm_gpiochip_add_data(&pdev->dev, mmc_gpio_chip, NULL);
+	if (ret)
+		return ret;
 
 	return devm_mfd_add_devices(&pdev->dev, PLATFORM_DEVID_AUTO,
 			vexpress_sysreg_cells,

[PATCH 6.6 177/196] dm: fix queue start/stop imbalance under suspend/load/resume races

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Zheng Qixing <zhengqixing@huawei.com>

commit 7f597c2cdb9d3263a6fce07c4fc0a9eaa8e8fc43 upstream.

When suspend and load run concurrently, before q->mq_ops is set in
blk_mq_init_allocated_queue(), __dm_suspend() skip dm_stop_queue(). As a
result, the queue's quiesce depth is not incremented.

Later, once table load has finished and __dm_resume() runs, which triggers
q->quiesce_depth ==0 warning in blk_mq_unquiesce_queue():
Call Trace:
 <TASK>
 dm_start_queue+0x16/0x20 [dm_mod]
 __dm_resume+0xac/0xb0 [dm_mod]
 dm_resume+0x12d/0x150 [dm_mod]
 do_resume+0x2c2/0x420 [dm_mod]
 dev_suspend+0x30/0x130 [dm_mod]
 ctl_ioctl+0x402/0x570 [dm_mod]
 dm_ctl_ioctl+0x23/0x30 [dm_mod]

Fix this by explicitly tracking whether the request queue was
stopped in __dm_suspend() via a new DMF_QUEUE_STOPPED flag.
Only call dm_start_queue() in __dm_resume() if the queue was
actually stopped.

Fixes: e70feb8b3e68 ("blk-mq: support concurrent queue quiesce/unquiesce")
Cc: stable@vger.kernel.org
Signed-off-by: Zheng Qixing <zhengqixing@huawei.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/md/dm-core.h |    1 +
 drivers/md/dm.c      |    8 +++++---
 2 files changed, 6 insertions(+), 3 deletions(-)

--- a/drivers/md/dm-core.h
+++ b/drivers/md/dm-core.h
@@ -161,6 +161,7 @@ struct mapped_device {
 #define DMF_SUSPENDED_INTERNALLY 7
 #define DMF_POST_SUSPENDING 8
 #define DMF_EMULATE_ZONE_APPEND 9
+#define DMF_QUEUE_STOPPED 10
 
 void disable_discard(struct mapped_device *md);
 void disable_write_zeroes(struct mapped_device *md);
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -2740,8 +2740,10 @@ static int __dm_suspend(struct mapped_de
 	 * Stop md->queue before flushing md->wq in case request-based
 	 * dm defers requests to md->wq from md->queue.
 	 */
-	if (dm_request_based(md))
+	if (dm_request_based(md)) {
 		dm_stop_queue(md->queue);
+		set_bit(DMF_QUEUE_STOPPED, &md->flags);
+	}
 
 	flush_workqueue(md->wq);
 
@@ -2763,7 +2765,7 @@ static int __dm_suspend(struct mapped_de
 	if (r < 0) {
 		dm_queue_flush(md);
 
-		if (dm_request_based(md))
+		if (test_and_clear_bit(DMF_QUEUE_STOPPED, &md->flags))
 			dm_start_queue(md->queue);
 
 		unlock_fs(md);
@@ -2847,7 +2849,7 @@ static int __dm_resume(struct mapped_dev
 	 * so that mapping of targets can work correctly.
 	 * Request-based dm is queueing the deferred I/Os in its request_queue.
 	 */
-	if (dm_request_based(md))
+	if (test_and_clear_bit(DMF_QUEUE_STOPPED, &md->flags))
 		dm_start_queue(md->queue);
 
 	unlock_fs(md);

[PATCH 6.6 178/196] dm: fix NULL pointer dereference in __dm_suspend()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Zheng Qixing <zhengqixing@huawei.com>

commit 8d33a030c566e1f105cd5bf27f37940b6367f3be upstream.

There is a race condition between dm device suspend and table load that
can lead to null pointer dereference. The issue occurs when suspend is
invoked before table load completes:

BUG: kernel NULL pointer dereference, address: 0000000000000054
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 6 PID: 6798 Comm: dmsetup Not tainted 6.6.0-g7e52f5f0ca9b #62
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014
RIP: 0010:blk_mq_wait_quiesce_done+0x0/0x50
Call Trace:
  <TASK>
  blk_mq_quiesce_queue+0x2c/0x50
  dm_stop_queue+0xd/0x20
  __dm_suspend+0x130/0x330
  dm_suspend+0x11a/0x180
  dev_suspend+0x27e/0x560
  ctl_ioctl+0x4cf/0x850
  dm_ctl_ioctl+0xd/0x20
  vfs_ioctl+0x1d/0x50
  __se_sys_ioctl+0x9b/0xc0
  __x64_sys_ioctl+0x19/0x30
  x64_sys_call+0x2c4a/0x4620
  do_syscall_64+0x9e/0x1b0

The issue can be triggered as below:

T1 						T2
dm_suspend					table_load
__dm_suspend					dm_setup_md_queue
						dm_mq_init_request_queue
						blk_mq_init_allocated_queue
						=> q->mq_ops = set->ops; (1)
dm_stop_queue / dm_wait_for_completion
=> q->tag_set NULL pointer!	(2)
						=> q->tag_set = set; (3)

Fix this by checking if a valid table (map) exists before performing
request-based suspend and waiting for target I/O. When map is NULL,
skip these table-dependent suspend steps.

Even when map is NULL, no I/O can reach any target because there is
no table loaded; I/O submitted in this state will fail early in the
DM layer. Skipping the table-dependent suspend logic in this case
is safe and avoids NULL pointer dereferences.

Fixes: c4576aed8d85 ("dm: fix request-based dm's use of dm_wait_for_completion")
Cc: stable@vger.kernel.org
Signed-off-by: Zheng Qixing <zhengqixing@huawei.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/md/dm.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -2688,7 +2688,7 @@ static int __dm_suspend(struct mapped_de
 {
 	bool do_lockfs = suspend_flags & DM_SUSPEND_LOCKFS_FLAG;
 	bool noflush = suspend_flags & DM_SUSPEND_NOFLUSH_FLAG;
-	int r;
+	int r = 0;
 
 	lockdep_assert_held(&md->suspend_lock);
 
@@ -2740,7 +2740,7 @@ static int __dm_suspend(struct mapped_de
 	 * Stop md->queue before flushing md->wq in case request-based
 	 * dm defers requests to md->wq from md->queue.
 	 */
-	if (dm_request_based(md)) {
+	if (map && dm_request_based(md)) {
 		dm_stop_queue(md->queue);
 		set_bit(DMF_QUEUE_STOPPED, &md->flags);
 	}
@@ -2752,7 +2752,8 @@ static int __dm_suspend(struct mapped_de
 	 * We call dm_wait_for_completion to wait for all existing requests
 	 * to finish.
 	 */
-	r = dm_wait_for_completion(md, task_state);
+	if (map)
+		r = dm_wait_for_completion(md, task_state);
 	if (!r)
 		set_bit(dmf_suspended_flag, &md->flags);
 

[PATCH 6.6 179/196] LoongArch: Automatically disable kaslr if boot from kexec_file

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Youling Tang <tangyouling@kylinos.cn>

commit c8168b4faf1d62cbb320a3e518ad31cdd567cb05 upstream.

Automatically disable kaslr when the kernel loads from kexec_file.

kexec_file loads the secondary kernel image to a non-linked address,
inherently providing KASLR-like randomization.

However, on LoongArch where System RAM may be non-contiguous, enabling
KASLR for the second kernel may relocate it to an invalid memory region
and cause a boot failure. Thus, we disable KASLR when "kexec_file" is
detected in the command line.

To ensure compatibility with older kernels loaded via kexec_file, this
patch should be backported to stable branches.

Cc: stable@vger.kernel.org
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/loongarch/kernel/relocate.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/arch/loongarch/kernel/relocate.c
+++ b/arch/loongarch/kernel/relocate.c
@@ -124,6 +124,10 @@ static inline __init bool kaslr_disabled
 	if (str == boot_command_line || (str > boot_command_line && *(str - 1) == ' '))
 		return true;
 
+	str = strstr(boot_command_line, "kexec_file");
+	if (str == boot_command_line || (str > boot_command_line && *(str - 1) == ' '))
+		return true;
+
 	return false;
 }
 

[PATCH 6.6 180/196] ksmbd: fix error code overwriting in smb2_get_info_filesystem()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Matvey Kovalev <matvey.kovalev@ispras.ru>

commit 88daf2f448aad05a2e6df738d66fe8b0cf85cee0 upstream.

If client doesn't negotiate with SMB3.1.1 POSIX Extensions,
then proper error code won't be returned due to overwriting.

Return error immediately.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: e2f34481b24db ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Signed-off-by: Matvey Kovalev <matvey.kovalev@ispras.ru>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/smb/server/smb2pdu.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/fs/smb/server/smb2pdu.c
+++ b/fs/smb/server/smb2pdu.c
@@ -5596,7 +5596,8 @@ static int smb2_get_info_filesystem(stru
 
 		if (!work->tcon->posix_extensions) {
 			pr_err("client doesn't negotiate with SMB3.1.1 POSIX Extensions\n");
-			rc = -EOPNOTSUPP;
+			path_put(&path);
+			return -EOPNOTSUPP;
 		} else {
 			info = (struct filesystem_posix_info *)(rsp->Buffer);
 			info->OptimalTransferSize = cpu_to_le32(stfs.f_bsize);

[PATCH 6.6 181/196] ext4: fix checks for orphan inodes

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jan Kara <jack@suse.cz>

commit acf943e9768ec9d9be80982ca0ebc4bfd6b7631e upstream.

When orphan file feature is enabled, inode can be tracked as orphan
either in the standard orphan list or in the orphan file. The first can
be tested by checking ei->i_orphan list head, the second is recorded by
EXT4_STATE_ORPHAN_FILE inode state flag. There are several places where
we want to check whether inode is tracked as orphan and only some of
them properly check for both possibilities. Luckily the consequences are
mostly minor, the worst that can happen is that we track an inode as
orphan although we don't need to and e2fsck then complains (resulting in
occasional ext4/307 xfstest failures). Fix the problem by introducing a
helper for checking whether an inode is tracked as orphan and use it in
appropriate places.

Fixes: 4a79a98c7b19 ("ext4: Improve scalability of ext4 orphan file handling")
Cc: stable@kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Message-ID: <20250925123038.20264-2-jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/ext4.h   |   10 ++++++++++
 fs/ext4/file.c   |    2 +-
 fs/ext4/inode.c  |    2 +-
 fs/ext4/orphan.c |    6 +-----
 fs/ext4/super.c  |    4 ++--
 5 files changed, 15 insertions(+), 9 deletions(-)

--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -1961,6 +1961,16 @@ static inline bool ext4_verity_in_progre
 #define NEXT_ORPHAN(inode) EXT4_I(inode)->i_dtime
 
 /*
+ * Check whether the inode is tracked as orphan (either in orphan file or
+ * orphan list).
+ */
+static inline bool ext4_inode_orphan_tracked(struct inode *inode)
+{
+	return ext4_test_inode_state(inode, EXT4_STATE_ORPHAN_FILE) ||
+		!list_empty(&EXT4_I(inode)->i_orphan);
+}
+
+/*
  * Codes for operating systems
  */
 #define EXT4_OS_LINUX		0
--- a/fs/ext4/file.c
+++ b/fs/ext4/file.c
@@ -354,7 +354,7 @@ static void ext4_inode_extension_cleanup
 	 * to cleanup the orphan list in ext4_handle_inode_extension(). Do it
 	 * now.
 	 */
-	if (!list_empty(&EXT4_I(inode)->i_orphan) && inode->i_nlink) {
+	if (ext4_inode_orphan_tracked(inode) && inode->i_nlink) {
 		handle_t *handle = ext4_journal_start(inode, EXT4_HT_INODE, 2);
 
 		if (IS_ERR(handle)) {
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -4370,7 +4370,7 @@ static int ext4_fill_raw_inode(struct in
 		 * old inodes get re-used with the upper 16 bits of the
 		 * uid/gid intact.
 		 */
-		if (ei->i_dtime && list_empty(&ei->i_orphan)) {
+		if (ei->i_dtime && !ext4_inode_orphan_tracked(inode)) {
 			raw_inode->i_uid_high = 0;
 			raw_inode->i_gid_high = 0;
 		} else {
--- a/fs/ext4/orphan.c
+++ b/fs/ext4/orphan.c
@@ -109,11 +109,7 @@ int ext4_orphan_add(handle_t *handle, st
 
 	WARN_ON_ONCE(!(inode->i_state & (I_NEW | I_FREEING)) &&
 		     !inode_is_locked(inode));
-	/*
-	 * Inode orphaned in orphan file or in orphan list?
-	 */
-	if (ext4_test_inode_state(inode, EXT4_STATE_ORPHAN_FILE) ||
-	    !list_empty(&EXT4_I(inode)->i_orphan))
+	if (ext4_inode_orphan_tracked(inode))
 		return 0;
 
 	/*
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -1464,9 +1464,9 @@ static void ext4_free_in_core_inode(stru
 
 static void ext4_destroy_inode(struct inode *inode)
 {
-	if (!list_empty(&(EXT4_I(inode)->i_orphan))) {
+	if (ext4_inode_orphan_tracked(inode)) {
 		ext4_msg(inode->i_sb, KERN_ERR,
-			 "Inode %lu (%p): orphan list check failed!",
+			 "Inode %lu (%p): inode tracked as orphan!",
 			 inode->i_ino, EXT4_I(inode));
 		print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS, 16, 4,
 				EXT4_I(inode), sizeof(struct ext4_inode_info),

[PATCH 6.6 182/196] mm: hugetlb: avoid soft lockup when mprotect to large memory area

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yang Shi <yang@os.amperecomputing.com>

commit f52ce0ea90c83a28904c7cc203a70e6434adfecb upstream.

When calling mprotect() to a large hugetlb memory area in our customer's
workload (~300GB hugetlb memory), soft lockup was observed:

watchdog: BUG: soft lockup - CPU#98 stuck for 23s! [t2_new_sysv:126916]

CPU: 98 PID: 126916 Comm: t2_new_sysv Kdump: loaded Not tainted 6.17-rc7
Hardware name: GIGACOMPUTING R2A3-T40-AAV1/Jefferson CIO, BIOS 5.4.4.1 07/15/2025
pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : mte_clear_page_tags+0x14/0x24
lr : mte_sync_tags+0x1c0/0x240
sp : ffff80003150bb80
x29: ffff80003150bb80 x28: ffff00739e9705a8 x27: 0000ffd2d6a00000
x26: 0000ff8e4bc00000 x25: 00e80046cde00f45 x24: 0000000000022458
x23: 0000000000000000 x22: 0000000000000004 x21: 000000011b380000
x20: ffff000000000000 x19: 000000011b379f40 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : ffffc875e0aa5e2c
x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000
x5 : fffffc01ce7a5c00 x4 : 00000000046cde00 x3 : fffffc0000000000
x2 : 0000000000000004 x1 : 0000000000000040 x0 : ffff0046cde7c000

Call trace:
  mte_clear_page_tags+0x14/0x24
  set_huge_pte_at+0x25c/0x280
  hugetlb_change_protection+0x220/0x430
  change_protection+0x5c/0x8c
  mprotect_fixup+0x10c/0x294
  do_mprotect_pkey.constprop.0+0x2e0/0x3d4
  __arm64_sys_mprotect+0x24/0x44
  invoke_syscall+0x50/0x160
  el0_svc_common+0x48/0x144
  do_el0_svc+0x30/0xe0
  el0_svc+0x30/0xf0
  el0t_64_sync_handler+0xc4/0x148
  el0t_64_sync+0x1a4/0x1a8

Soft lockup is not triggered with THP or base page because there is
cond_resched() called for each PMD size.

Although the soft lockup was triggered by MTE, it should be not MTE
specific.  The other processing which takes long time in the loop may
trigger soft lockup too.

So add cond_resched() for hugetlb to avoid soft lockup.

Link: https://lkml.kernel.org/r/20250929202402.1663290-1-yang@os.amperecomputing.com
Fixes: 8f860591ffb2 ("[PATCH] Enable mprotect on huge pages")
Signed-off-by: Yang Shi <yang@os.amperecomputing.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Reviewed-by: Christoph Lameter (Ampere) <cl@gentwo.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/hugetlb.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -6693,6 +6693,8 @@ long hugetlb_change_protection(struct vm
 						psize);
 		}
 		spin_unlock(ptl);
+
+		cond_resched();
 	}
 	/*
 	 * Must flush TLB before releasing i_mmap_rwsem: x86's huge_pmd_unshare

[PATCH 6.6 183/196] nvdimm: ndtest: Return -ENOMEM if devm_kcalloc() fails in ndtest_probe()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Guangshuo Li <lgs201920130244@gmail.com>

commit a9e6aa994917ee602798bbb03180a194b37865bb upstream.

devm_kcalloc() may fail. ndtest_probe() allocates three DMA address
arrays (dcr_dma, label_dma, dimm_dma) and later unconditionally uses
them in ndtest_nvdimm_init(), which can lead to a NULL pointer
dereference under low-memory conditions.

Check all three allocations and return -ENOMEM if any allocation fails,
jumping to the common error path. Do not emit an extra error message
since the allocator already warns on allocation failure.

Fixes: 9399ab61ad82 ("ndtest: Add dimms to the two buses")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/testing/nvdimm/test/ndtest.c |   13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

--- a/tools/testing/nvdimm/test/ndtest.c
+++ b/tools/testing/nvdimm/test/ndtest.c
@@ -845,11 +845,22 @@ static int ndtest_probe(struct platform_
 
 	p->dcr_dma = devm_kcalloc(&p->pdev.dev, NUM_DCR,
 				 sizeof(dma_addr_t), GFP_KERNEL);
+	if (!p->dcr_dma) {
+		rc = -ENOMEM;
+		goto err;
+	}
 	p->label_dma = devm_kcalloc(&p->pdev.dev, NUM_DCR,
 				   sizeof(dma_addr_t), GFP_KERNEL);
+	if (!p->label_dma) {
+		rc = -ENOMEM;
+		goto err;
+	}
 	p->dimm_dma = devm_kcalloc(&p->pdev.dev, NUM_DCR,
 				  sizeof(dma_addr_t), GFP_KERNEL);
-
+	if (!p->dimm_dma) {
+		rc = -ENOMEM;
+		goto err;
+	}
 	rc = ndtest_nvdimm_init(p);
 	if (rc)
 		goto err;

[PATCH 6.6 184/196] misc: fastrpc: Fix fastrpc_map_lookup operation

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ling Xu <quic_lxu5@quicinc.com>

commit 9031626ade38b092b72638dfe0c6ffce8d8acd43 upstream.

Fastrpc driver creates maps for user allocated fd buffers. Before
creating a new map, the map list is checked for any already existing
maps using map fd. Checking with just map fd is not sufficient as the
user can pass offsetted buffer with less size when the map is created
and then a larger size the next time which could result in memory
issues. Check for dma_buf object also when looking up for the map.

Fixes: c68cfb718c8f ("misc: fastrpc: Add support for context Invoke method")
Cc: stable@kernel.org
Co-developed-by: Ekansh Gupta <ekansh.gupta@oss.qualcomm.com>
Signed-off-by: Ekansh Gupta <ekansh.gupta@oss.qualcomm.com>
Signed-off-by: Ling Xu <quic_lxu5@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://lore.kernel.org/r/20250912131236.303102-3-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/misc/fastrpc.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/drivers/misc/fastrpc.c
+++ b/drivers/misc/fastrpc.c
@@ -366,11 +366,16 @@ static int fastrpc_map_lookup(struct fas
 {
 	struct fastrpc_session_ctx *sess = fl->sctx;
 	struct fastrpc_map *map = NULL;
+	struct dma_buf *buf;
 	int ret = -ENOENT;
 
+	buf = dma_buf_get(fd);
+	if (IS_ERR(buf))
+		return PTR_ERR(buf);
+
 	spin_lock(&fl->lock);
 	list_for_each_entry(map, &fl->maps, node) {
-		if (map->fd != fd)
+		if (map->fd != fd || map->buf != buf)
 			continue;
 
 		if (take_ref) {

[PATCH 6.6 185/196] misc: fastrpc: fix possible map leak in fastrpc_put_args

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ling Xu <quic_lxu5@quicinc.com>

commit da1ba64176e0138f2bfa96f9e43e8c3640d01e1e upstream.

copy_to_user() failure would cause an early return without cleaning up
the fdlist, which has been updated by the DSP. This could lead to map
leak. Fix this by redirecting to a cleanup path on failure, ensuring
that all mapped buffers are properly released before returning.

Fixes: c68cfb718c8f ("misc: fastrpc: Add support for context Invoke method")
Cc: stable@kernel.org
Co-developed-by: Ekansh Gupta <ekansh.gupta@oss.qualcomm.com>
Signed-off-by: Ekansh Gupta <ekansh.gupta@oss.qualcomm.com>
Signed-off-by: Ling Xu <quic_lxu5@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://lore.kernel.org/r/20250912131236.303102-4-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/misc/fastrpc.c |   10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

--- a/drivers/misc/fastrpc.c
+++ b/drivers/misc/fastrpc.c
@@ -1072,6 +1072,7 @@ static int fastrpc_put_args(struct fastr
 	struct fastrpc_phy_page *pages;
 	u64 *fdlist;
 	int i, inbufs, outbufs, handles;
+	int ret = 0;
 
 	inbufs = REMOTE_SCALARS_INBUFS(ctx->sc);
 	outbufs = REMOTE_SCALARS_OUTBUFS(ctx->sc);
@@ -1087,14 +1088,17 @@ static int fastrpc_put_args(struct fastr
 			u64 len = rpra[i].buf.len;
 
 			if (!kernel) {
-				if (copy_to_user((void __user *)dst, src, len))
-					return -EFAULT;
+				if (copy_to_user((void __user *)dst, src, len)) {
+					ret = -EFAULT;
+					goto cleanup_fdlist;
+				}
 			} else {
 				memcpy(dst, src, len);
 			}
 		}
 	}
 
+cleanup_fdlist:
 	/* Clean up fdlist which is updated by DSP */
 	for (i = 0; i < FASTRPC_MAX_FDLIST; i++) {
 		if (!fdlist[i])
@@ -1103,7 +1107,7 @@ static int fastrpc_put_args(struct fastr
 			fastrpc_map_put(mmap);
 	}
 
-	return 0;
+	return ret;
 }
 
 static int fastrpc_invoke_send(struct fastrpc_session_ctx *sctx,

[PATCH 6.6 186/196] misc: fastrpc: Skip reference for DMA handles

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ling Xu <quic_lxu5@quicinc.com>

commit 10df039834f84a297c72ec962c0f9b7c8c5ca31a upstream.

If multiple dma handles are passed with same fd over a remote call
the kernel driver takes a reference and expects that put for the
map will be called as many times to free the map. But DSP only
updates the fd one time in the fd list when the DSP refcount
goes to zero and hence kernel make put call only once for the
fd. This can cause SMMU fault issue as the same fd can be used
in future for some other call.

Fixes: 35a82b87135d ("misc: fastrpc: Add dma handle implementation")
Cc: stable@kernel.org
Co-developed-by: Ekansh Gupta <ekansh.gupta@oss.qualcomm.com>
Signed-off-by: Ekansh Gupta <ekansh.gupta@oss.qualcomm.com>
Signed-off-by: Ling Xu <quic_lxu5@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://lore.kernel.org/r/20250912131236.303102-5-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/misc/fastrpc.c |   45 +++++++++++++++++++++++++++------------------
 1 file changed, 27 insertions(+), 18 deletions(-)

--- a/drivers/misc/fastrpc.c
+++ b/drivers/misc/fastrpc.c
@@ -362,9 +362,8 @@ static int fastrpc_map_get(struct fastrp
 
 
 static int fastrpc_map_lookup(struct fastrpc_user *fl, int fd,
-			    struct fastrpc_map **ppmap, bool take_ref)
+			    struct fastrpc_map **ppmap)
 {
-	struct fastrpc_session_ctx *sess = fl->sctx;
 	struct fastrpc_map *map = NULL;
 	struct dma_buf *buf;
 	int ret = -ENOENT;
@@ -378,15 +377,6 @@ static int fastrpc_map_lookup(struct fas
 		if (map->fd != fd || map->buf != buf)
 			continue;
 
-		if (take_ref) {
-			ret = fastrpc_map_get(map);
-			if (ret) {
-				dev_dbg(sess->dev, "%s: Failed to get map fd=%d ret=%d\n",
-					__func__, fd, ret);
-				break;
-			}
-		}
-
 		*ppmap = map;
 		ret = 0;
 		break;
@@ -756,7 +746,7 @@ static const struct dma_buf_ops fastrpc_
 	.release = fastrpc_release,
 };
 
-static int fastrpc_map_create(struct fastrpc_user *fl, int fd,
+static int fastrpc_map_attach(struct fastrpc_user *fl, int fd,
 			      u64 len, u32 attr, struct fastrpc_map **ppmap)
 {
 	struct fastrpc_session_ctx *sess = fl->sctx;
@@ -764,9 +754,6 @@ static int fastrpc_map_create(struct fas
 	struct sg_table *table;
 	int err = 0;
 
-	if (!fastrpc_map_lookup(fl, fd, ppmap, true))
-		return 0;
-
 	map = kzalloc(sizeof(*map), GFP_KERNEL);
 	if (!map)
 		return -ENOMEM;
@@ -843,6 +830,24 @@ get_err:
 	return err;
 }
 
+static int fastrpc_map_create(struct fastrpc_user *fl, int fd,
+			      u64 len, u32 attr, struct fastrpc_map **ppmap)
+{
+	struct fastrpc_session_ctx *sess = fl->sctx;
+	int err = 0;
+
+	if (!fastrpc_map_lookup(fl, fd, ppmap)) {
+		if (!fastrpc_map_get(*ppmap))
+			return 0;
+		dev_dbg(sess->dev, "%s: Failed to get map fd=%d\n",
+			__func__, fd);
+	}
+
+	err = fastrpc_map_attach(fl, fd, len, attr, ppmap);
+
+	return err;
+}
+
 /*
  * Fastrpc payload buffer with metadata looks like:
  *
@@ -915,8 +920,12 @@ static int fastrpc_create_maps(struct fa
 		    ctx->args[i].length == 0)
 			continue;
 
-		err = fastrpc_map_create(ctx->fl, ctx->args[i].fd,
-			 ctx->args[i].length, ctx->args[i].attr, &ctx->maps[i]);
+		if (i < ctx->nbufs)
+			err = fastrpc_map_create(ctx->fl, ctx->args[i].fd,
+				 ctx->args[i].length, ctx->args[i].attr, &ctx->maps[i]);
+		else
+			err = fastrpc_map_attach(ctx->fl, ctx->args[i].fd,
+				 ctx->args[i].length, ctx->args[i].attr, &ctx->maps[i]);
 		if (err) {
 			dev_err(dev, "Error Creating map %d\n", err);
 			return -EINVAL;
@@ -1103,7 +1112,7 @@ cleanup_fdlist:
 	for (i = 0; i < FASTRPC_MAX_FDLIST; i++) {
 		if (!fdlist[i])
 			break;
-		if (!fastrpc_map_lookup(fl, (int)fdlist[i], &mmap, false))
+		if (!fastrpc_map_lookup(fl, (int)fdlist[i], &mmap))
 			fastrpc_map_put(mmap);
 	}
 

[PATCH 6.6 187/196] Input: atmel_mxt_ts - allow reset GPIO to sleep

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marek Vasut <marek.vasut@mailbox.org>

commit c7866ee0a9ddd9789faadf58cdac6abd7aabf045 upstream.

The reset GPIO is not toggled in any critical section where it couldn't
sleep, allow the reset GPIO to sleep. This allows the driver to operate
reset GPIOs connected to I2C GPIO expanders.

Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Link: https://lore.kernel.org/r/20251005023335.166483-1-marek.vasut@mailbox.org
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/input/touchscreen/atmel_mxt_ts.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -3324,7 +3324,7 @@ static int mxt_probe(struct i2c_client *
 	if (data->reset_gpio) {
 		/* Wait a while and then de-assert the RESET GPIO line */
 		msleep(MXT_RESET_GPIO_TIME);
-		gpiod_set_value(data->reset_gpio, 0);
+		gpiod_set_value_cansleep(data->reset_gpio, 0);
 		msleep(MXT_RESET_INVALID_CHG);
 	}
 

[PATCH 6.6 188/196] Input: uinput - zero-initialize uinput_ff_upload_compat to avoid info leak

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Zhen Ni <zhen.ni@easystack.cn>

commit d3366a04770eea807f2826cbdb96934dd8c9bf79 upstream.

Struct ff_effect_compat is embedded twice inside
uinput_ff_upload_compat, contains internal padding. In particular, there
is a hole after struct ff_replay to satisfy alignment requirements for
the following union member. Without clearing the structure,
copy_to_user() may leak stack data to userspace.

Initialize ff_up_compat to zero before filling valid fields.

Fixes: 2d56f3a32c0e ("Input: refactor evdev 32bit compat to be shareable with uinput")
Cc: stable@vger.kernel.org
Signed-off-by: Zhen Ni <zhen.ni@easystack.cn>
Link: https://lore.kernel.org/r/20250928063737.74590-1-zhen.ni@easystack.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/input/misc/uinput.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/input/misc/uinput.c
+++ b/drivers/input/misc/uinput.c
@@ -775,6 +775,7 @@ static int uinput_ff_upload_to_user(char
 	if (in_compat_syscall()) {
 		struct uinput_ff_upload_compat ff_up_compat;
 
+		memset(&ff_up_compat, 0, sizeof(ff_up_compat));
 		ff_up_compat.request_id = ff_up->request_id;
 		ff_up_compat.retval = ff_up->retval;
 		/*

[PATCH 6.6 189/196] sunrpc: fix null pointer dereference on zero-length checksum

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lei Lu <llfamsec@gmail.com>

commit 6df164e29bd4e6505c5a2e0e5f1e1f6957a16a42 upstream.

In xdr_stream_decode_opaque_auth(), zero-length checksum.len causes
checksum.data to be set to NULL. This triggers a NPD when accessing
checksum.data in gss_krb5_verify_mic_v2(). This patch ensures that
the value of checksum.len is not less than XDR_UNIT.

Fixes: 0653028e8f1c ("SUNRPC: Convert gss_verify_header() to use xdr_stream")
Cc: stable@kernel.org
Signed-off-by: Lei Lu <llfamsec@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sunrpc/auth_gss/svcauth_gss.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/sunrpc/auth_gss/svcauth_gss.c
+++ b/net/sunrpc/auth_gss/svcauth_gss.c
@@ -724,7 +724,7 @@ svcauth_gss_verify_header(struct svc_rqs
 		rqstp->rq_auth_stat = rpc_autherr_badverf;
 		return SVC_DENIED;
 	}
-	if (flavor != RPC_AUTH_GSS) {
+	if (flavor != RPC_AUTH_GSS || checksum.len < XDR_UNIT) {
 		rqstp->rq_auth_stat = rpc_autherr_badverf;
 		return SVC_DENIED;
 	}

[PATCH 6.6 190/196] remoteproc: pru: Fix potential NULL pointer dereference in pru_rproc_set_ctable()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Zhen Ni <zhen.ni@easystack.cn>

commit d41e075b077142bb9ae5df40b9ddf9fd7821a811 upstream.

pru_rproc_set_ctable() accessed rproc->priv before the IS_ERR_OR_NULL
check, which could lead to a null pointer dereference. Move the pru
assignment, ensuring we never dereference a NULL rproc pointer.

Fixes: 102853400321 ("remoteproc: pru: Add pru_rproc_set_ctable() function")
Cc: stable@vger.kernel.org
Signed-off-by: Zhen Ni <zhen.ni@easystack.cn>
Link: https://lore.kernel.org/r/20250923112109.1165126-1-zhen.ni@easystack.cn
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/remoteproc/pru_rproc.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/remoteproc/pru_rproc.c
+++ b/drivers/remoteproc/pru_rproc.c
@@ -340,7 +340,7 @@ EXPORT_SYMBOL_GPL(pru_rproc_put);
  */
 int pru_rproc_set_ctable(struct rproc *rproc, enum pru_ctable_idx c, u32 addr)
 {
-	struct pru_rproc *pru = rproc->priv;
+	struct pru_rproc *pru;
 	unsigned int reg;
 	u32 mask, set;
 	u16 idx;
@@ -352,6 +352,7 @@ int pru_rproc_set_ctable(struct rproc *r
 	if (!rproc->dev.parent || !is_pru_rproc(rproc->dev.parent))
 		return -ENODEV;
 
+	pru = rproc->priv;
 	/* pointer is 16 bit and index is 8-bit so mask out the rest */
 	idx_mask = (c >= PRU_C28) ? 0xFFFF : 0xFF;
 

[PATCH 6.6 191/196] pinctrl: check the return value of pinmux_ops::get_function_name()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

commit 4002ee98c022d671ecc1e4a84029e9ae7d8a5603 upstream.

While the API contract in docs doesn't specify it explicitly, the
generic implementation of the get_function_name() callback from struct
pinmux_ops - pinmux_generic_get_function_name() - can fail and return
NULL. This is already checked in pinmux_check_ops() so add a similar
check in pinmux_func_name_to_selector() instead of passing the returned
pointer right down to strcmp() where the NULL can get dereferenced. This
is normal operation when adding new pinfunctions.

Cc: stable@vger.kernel.org
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pinctrl/pinmux.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/pinctrl/pinmux.c
+++ b/drivers/pinctrl/pinmux.c
@@ -339,7 +339,7 @@ static int pinmux_func_name_to_selector(
 	while (selector < nfuncs) {
 		const char *fname = ops->get_function_name(pctldev, selector);
 
-		if (!strcmp(function, fname))
+		if (fname && !strcmp(function, fname))
 			return selector;
 
 		selector++;

[PATCH 6.6 192/196] bus: fsl-mc: Check return value of platform_get_resource()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Salah Triki <salah.triki@gmail.com>

commit 25f526507b8ccc6ac3a43bc094d09b1f9b0b90ae upstream.

platform_get_resource() returns NULL in case of failure, so check its
return value and propagate the error in order to prevent NULL pointer
dereference.

Fixes: 6305166c8771 ("bus: fsl-mc: Add ACPI support for fsl-mc")
Cc: stable@vger.kernel.org
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Acked-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/aKwuK6TRr5XNYQ8u@pc
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/bus/fsl-mc/fsl-mc-bus.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/bus/fsl-mc/fsl-mc-bus.c
+++ b/drivers/bus/fsl-mc/fsl-mc-bus.c
@@ -1103,6 +1103,9 @@ static int fsl_mc_bus_probe(struct platf
 	 * Get physical address of MC portal for the root DPRC:
 	 */
 	plat_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!plat_res)
+		return -EINVAL;
+
 	mc_portal_phys_addr = plat_res->start;
 	mc_portal_size = resource_size(plat_res);
 	mc_portal_base_phys_addr = mc_portal_phys_addr & ~0x3ffffff;

[PATCH 6.6 193/196] net: usb: asix: hold PM usage ref to avoid PM/MDIO + RTNL deadlock

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Oleksij Rempel <o.rempel@pengutronix.de>

commit 3d3c4cd5c62f24bb3cb4511b7a95df707635e00a upstream.

Prevent USB runtime PM (autosuspend) for AX88772* in bind.

usbnet enables runtime PM (autosuspend) by default, so disabling it via
the usb_driver flag is ineffective. On AX88772B, autosuspend shows no
measurable power saving with current driver (no link partner, admin
up/down). The ~0.453 W -> ~0.248 W drop on v6.1 comes from phylib powering
the PHY off on admin-down, not from USB autosuspend.

The real hazard is that with runtime PM enabled, ndo_open() (under RTNL)
may synchronously trigger autoresume (usb_autopm_get_interface()) into
asix_resume() while the USB PM lock is held. Resume paths then invoke
phylink/phylib and MDIO, which also expect RTNL, leading to possible
deadlocks or PM lock vs MDIO wake issues.

To avoid this, keep the device runtime-PM active by taking a usage
reference in ax88772_bind() and dropping it in unbind(). A non-zero PM
usage count blocks runtime suspend regardless of userspace policy
(.../power/control - pm_runtime_allow/forbid), making this approach
robust against sysfs overrides.

Holding a runtime-PM usage ref does not affect system-wide suspend;
system sleep/resume callbacks continue to run as before.

Fixes: 4a2c7217cd5a ("net: usb: asix: ax88772: manage PHY PM from MAC")
Reported-by: Hubert Wiśniewski <hubert.wisniewski.25632@gmail.com>
Closes: https://lore.kernel.org/all/DCGHG5UJT9G3.2K1GHFZ3H87T0@gmail.com
Tested-by: Hubert Wiśniewski <hubert.wisniewski.25632@gmail.com>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Closes: https://lore.kernel.org/all/b5ea8296-f981-445d-a09a-2f389d7f6fdd@samsung.com
Cc: stable@vger.kernel.org
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20251005081203.3067982-1-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/asix_devices.c |   29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -625,6 +625,21 @@ static void ax88772_suspend(struct usbne
 		   asix_read_medium_status(dev, 1));
 }
 
+/* Notes on PM callbacks and locking context:
+ *
+ * - asix_suspend()/asix_resume() are invoked for both runtime PM and
+ *   system-wide suspend/resume. For struct usb_driver the ->resume()
+ *   callback does not receive pm_message_t, so the resume type cannot
+ *   be distinguished here.
+ *
+ * - The MAC driver must hold RTNL when calling phylink interfaces such as
+ *   phylink_suspend()/resume(). Those calls will also perform MDIO I/O.
+ *
+ * - Taking RTNL and doing MDIO from a runtime-PM resume callback (while
+ *   the USB PM lock is held) is fragile. Since autosuspend brings no
+ *   measurable power saving here, we block it by holding a PM usage
+ *   reference in ax88772_bind().
+ */
 static int asix_suspend(struct usb_interface *intf, pm_message_t message)
 {
 	struct usbnet *dev = usb_get_intfdata(intf);
@@ -919,6 +934,13 @@ static int ax88772_bind(struct usbnet *d
 	if (ret)
 		goto initphy_err;
 
+	/* Keep this interface runtime-PM active by taking a usage ref.
+	 * Prevents runtime suspend while bound and avoids resume paths
+	 * that could deadlock (autoresume under RTNL while USB PM lock
+	 * is held, phylink/MDIO wants RTNL).
+	 */
+	pm_runtime_get_noresume(&intf->dev);
+
 	return 0;
 
 initphy_err:
@@ -948,6 +970,8 @@ static void ax88772_unbind(struct usbnet
 	phylink_destroy(priv->phylink);
 	ax88772_mdio_unregister(priv);
 	asix_rx_fixup_common_free(dev->driver_priv);
+	/* Drop the PM usage ref taken in bind() */
+	pm_runtime_put(&intf->dev);
 }
 
 static void ax88178_unbind(struct usbnet *dev, struct usb_interface *intf)
@@ -1600,6 +1624,11 @@ static struct usb_driver asix_driver = {
 	.resume =	asix_resume,
 	.reset_resume =	asix_resume,
 	.disconnect =	usbnet_disconnect,
+	/* usbnet enables autosuspend by default (supports_autosuspend=1).
+	 * We keep runtime-PM active for AX88772* by taking a PM usage
+	 * reference in ax88772_bind() (pm_runtime_get_noresume()) and
+	 * dropping it in unbind(), which effectively blocks autosuspend.
+	 */
 	.supports_autosuspend = 1,
 	.disable_hub_initiated_lpm = 1,
 };

[PATCH 6.6 194/196] usb: typec: tipd: Clear interrupts first

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sven Peter <sven@kernel.org>

commit be5ae730ffa6fd774a00a4705c1e11e078b08ca1 upstream.

Right now the interrupt handler first reads all updated status registers
and only then clears the interrupts. It's possible that a duplicate
interrupt for a changed register or plug state comes in after the
interrupts have been processed but before they have been cleared:

* plug is inserted, TPS_REG_INT_PLUG_EVENT is set
* TPS_REG_INT_EVENT1 is read
* tps6598x_handle_plug_event() has run and registered the plug
* plug is removed again, TPS_REG_INT_PLUG_EVENT is set (again)
* TPS_REG_INT_CLEAR1 is written, TPS_REG_INT_PLUG_EVENT is cleared

We then have no plug connected and no pending interrupt but the tipd
core still thinks there is a plug. It's possible to trigger this with
e.g. a slightly broken Type-C to USB A converter.

Fix this by first clearing the interrupts and only then reading the
updated registers.

Fixes: 45188f27b3d0 ("usb: typec: tipd: Add support for Apple CD321X")
Fixes: 0a4c005bd171 ("usb: typec: driver for TI TPS6598x USB Power Delivery controllers")
Cc: stable@kernel.org
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://lore.kernel.org/r/20250914-apple-usb3-tipd-v1-1-4e99c8649024@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/typec/tipd/core.c |   24 +++++++++++-------------
 1 file changed, 11 insertions(+), 13 deletions(-)

--- a/drivers/usb/typec/tipd/core.c
+++ b/drivers/usb/typec/tipd/core.c
@@ -488,24 +488,23 @@ static irqreturn_t cd321x_interrupt(int
 	if (!event)
 		goto err_unlock;
 
+	tps6598x_write64(tps, TPS_REG_INT_CLEAR1, event);
+
 	if (!tps6598x_read_status(tps, &status))
-		goto err_clear_ints;
+		goto err_unlock;
 
 	if (event & APPLE_CD_REG_INT_POWER_STATUS_UPDATE)
 		if (!tps6598x_read_power_status(tps))
-			goto err_clear_ints;
+			goto err_unlock;
 
 	if (event & APPLE_CD_REG_INT_DATA_STATUS_UPDATE)
 		if (!tps6598x_read_data_status(tps))
-			goto err_clear_ints;
+			goto err_unlock;
 
 	/* Handle plug insert or removal */
 	if (event & APPLE_CD_REG_INT_PLUG_EVENT)
 		tps6598x_handle_plug_event(tps, status);
 
-err_clear_ints:
-	tps6598x_write64(tps, TPS_REG_INT_CLEAR1, event);
-
 err_unlock:
 	mutex_unlock(&tps->lock);
 
@@ -552,25 +551,24 @@ static irqreturn_t tps6598x_interrupt(in
 	if (!(event1[0] | event1[1] | event2[0] | event2[1]))
 		goto err_unlock;
 
+	tps6598x_block_write(tps, TPS_REG_INT_CLEAR1, event1, intev_len);
+	tps6598x_block_write(tps, TPS_REG_INT_CLEAR2, event2, intev_len);
+
 	if (!tps6598x_read_status(tps, &status))
-		goto err_clear_ints;
+		goto err_unlock;
 
 	if ((event1[0] | event2[0]) & TPS_REG_INT_POWER_STATUS_UPDATE)
 		if (!tps6598x_read_power_status(tps))
-			goto err_clear_ints;
+			goto err_unlock;
 
 	if ((event1[0] | event2[0]) & TPS_REG_INT_DATA_STATUS_UPDATE)
 		if (!tps6598x_read_data_status(tps))
-			goto err_clear_ints;
+			goto err_unlock;
 
 	/* Handle plug insert or removal */
 	if ((event1[0] | event2[0]) & TPS_REG_INT_PLUG_EVENT)
 		tps6598x_handle_plug_event(tps, status);
 
-err_clear_ints:
-	tps6598x_block_write(tps, TPS_REG_INT_CLEAR1, event1, intev_len);
-	tps6598x_block_write(tps, TPS_REG_INT_CLEAR2, event2, intev_len);
-
 err_unlock:
 	mutex_unlock(&tps->lock);
 

[PATCH 6.6 195/196] arm64: dts: qcom: qcm2290: Disable USB SS bus instances in park mode

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

commit 27f94b71532203b079537180924023a5f636fca1 upstream.

2290 was found in the field to also require this quirk, as long &
high-bandwidth workloads (e.g. USB ethernet) are consistently able to
crash the controller otherwise.

The same change has been made for a number of SoCs in [1], but QCM2290
somehow escaped the list (even though the very closely related SM6115
was there).

Upon a controller crash, the log would read:

xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up

Add snps,parkmode-disable-ss-quirk to the DWC3 instance in order to
prevent the aforementioned breakage.

[1] https://lore.kernel.org/all/20240704152848.3380602-1-quic_kriskura@quicinc.com/

Cc: stable@vger.kernel.org
Reported-by: Rob Clark <robin.clark@oss.qualcomm.com>
Fixes: a64a0192b70c ("arm64: dts: qcom: Add initial QCM2290 device tree")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250708-topic-2290_usb-v1-1-661e70a63339@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/boot/dts/qcom/qcm2290.dtsi |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/arm64/boot/dts/qcom/qcm2290.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
@@ -1107,6 +1107,7 @@
 				snps,has-lpm-erratum;
 				snps,hird-threshold = /bits/ 8 <0x10>;
 				snps,usb3_lpm_capable;
+				snps,parkmode-disable-ss-quirk;
 				maximum-speed = "super-speed";
 				dr_mode = "otg";
 			};

[PATCH 6.6 196/196] usb: cdns3: cdnsp-pci: remove redundant pci_disable_device() call

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Miaoqian Lin <linmq006@gmail.com>

commit e9c206324eeb213957a567a9d066bdeb355c7491 upstream.

The cdnsp-pci driver uses pcim_enable_device() to enable a PCI device,
which means the device will be automatically disabled on driver detach
through the managed device framework. The manual pci_disable_device()
call in the error path is therefore redundant.

Found via static anlaysis and this is similar to commit 99ca0b57e49f
("thermal: intel: int340x: processor: Fix warning during module unload").

Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20250903141613.2535472-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/cdns3/cdnsp-pci.c |    5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

--- a/drivers/usb/cdns3/cdnsp-pci.c
+++ b/drivers/usb/cdns3/cdnsp-pci.c
@@ -90,7 +90,7 @@ static int cdnsp_pci_probe(struct pci_de
 		cdnsp = kzalloc(sizeof(*cdnsp), GFP_KERNEL);
 		if (!cdnsp) {
 			ret = -ENOMEM;
-			goto disable_pci;
+			goto put_pci;
 		}
 	}
 
@@ -173,9 +173,6 @@ free_cdnsp:
 	if (!pci_is_enabled(func))
 		kfree(cdnsp);
 
-disable_pci:
-	pci_disable_device(pdev);
-
 put_pci:
 	pci_dev_put(func);
 

Re: [PATCH 6.6 000/196] 6.6.112-rc1 review

[Florian Fainelli]

On 10/13/25 07:43, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.6.112 release.
> There are 196 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 15 Oct 2025 14:42:41 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.112-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on 
BMIPS_GENERIC:

Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
-- 
Florian

Re: [PATCH 6.6 000/196] 6.6.112-rc1 review

[Brett A C Sheffield]

# Librecast Test Results

010/010 [ OK ] libmld
120/120 [ OK ] liblibrecast

CPU/kernel: Linux auntie 6.6.112-rc1-g07c1c4215e92 #108 SMP PREEMPT_DYNAMIC Mon Oct 13 16:51:13 -00 2025 x86_64 AMD Ryzen 9 9950X 16-Core Processor AuthenticAMD GNU/Linux

Tested-by: Brett A C Sheffield <bacs@librecast.net>

Re: [PATCH 6.6 000/196] 6.6.112-rc1 review

[Peter Schneider]

Am 13.10.2025 um 16:43 schrieb Greg Kroah-Hartman:
> This is the start of the stable review cycle for the 6.6.112 release.
> There are 196 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

Builds, boots and works on my 2-socket Ivy Bridge Xeon E5-2697 v2 server. No dmesg oddities or regressions found.

Tested-by: Peter Schneider <pschneider1968@googlemail.com>


Beste Grüße,
Peter Schneider

-- 
Climb the mountain not to plant your flag, but to embrace the challenge,
enjoy the air and behold the view. Climb it so you can see the world,
not so the world can see you.                    -- David McCullough Jr.

OpenPGP:  0xA3828BD796CCE11A8CADE8866E3A92C92C3FF244
Download: https://www.peters-netzplatz.de/download/pschneider1968_pub.asc
https://keys.mailvelope.com/pks/lookup?op=get&search=pschneider1968@googlemail.com
https://keys.mailvelope.com/pks/lookup?op=get&search=pschneider1968@gmail.com

Re: [PATCH 6.6 000/196] 6.6.112-rc1 review

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 642 bytes --]

Hi!

> This is the start of the stable review cycle for the 6.6.112 release.
> There are 196 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

CIP testing did not find any problems here:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-6.6.y

Tested-by: Pavel Machek (CIP) <pavel@denx.de>

Best regards,
                                                                Pavel
-- 
In cooperation with DENX Software Engineering GmbH, HRB 165235 Munich,
Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH 6.6 000/196] 6.6.112-rc1 review

[Naresh Kamboju]

On Mon, 13 Oct 2025 at 20:28, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 6.6.112 release.
> There are 196 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 15 Oct 2025 14:42:41 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.112-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

The S390 defconfig builds failed on the Linux stable-rc 6.6.112-rc1
and 6.12.53-rc1 tag build due to following build warnings / errors
with gcc and clang toolchains.

Also seen on 6.12.53-rc1

First seen on 6.6.112-rc1
Good: v6.6.111
Bad: 6.6.112-rc1 also seen on 6.12.53-rc1

Regression Analysis:
- New regression? Yes
- Reproducibility? Yes

Build regressions: arch/s390/net/bpf_jit_comp.c:1463:49: error:
'struct bpf_jit' has no member named 'frame_off'

Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>

# Build error
arch/s390/net/bpf_jit_comp.c: In function 'bpf_jit_insn':
arch/s390/net/bpf_jit_comp.c:1463:49: error: 'struct bpf_jit' has no
member named 'frame_off'
 1463 |                         _EMIT6(0xd203f000 | (jit->frame_off +
      |                                                 ^~
arch/s390/net/bpf_jit_comp.c:208:55: note: in definition of macro '_EMIT6'
  208 |                 *(u32 *) (jit->prg_buf + jit->prg) = (op1);     \
      |                                                       ^~~
include/linux/stddef.h:16:33: error: invalid use of undefined type
'struct prog_frame'
   16 | #define offsetof(TYPE, MEMBER)  __builtin_offsetof(TYPE, MEMBER)
      |                                 ^~~~~~~~~~~~~~~~~~
arch/s390/net/bpf_jit_comp.c:208:55: note: in definition of macro '_EMIT6'
  208 |                 *(u32 *) (jit->prg_buf + jit->prg) = (op1);     \
      |                                                       ^~~
arch/s390/net/bpf_jit_comp.c:1464:46: note: in expansion of macro 'offsetof'
 1464 |                                              offsetof(struct prog_frame,
      |                                              ^~~~~~~~
include/linux/stddef.h:16:33: error: invalid use of undefined type
'struct prog_frame'
   16 | #define offsetof(TYPE, MEMBER)  __builtin_offsetof(TYPE, MEMBER)
      |                                 ^~~~~~~~~~~~~~~~~~
arch/s390/net/bpf_jit_comp.c:209:59: note: in definition of macro '_EMIT6'
  209 |                 *(u16 *) (jit->prg_buf + jit->prg + 4) = (op2); \
      |                                                           ^~~
arch/s390/net/bpf_jit_comp.c:1466:41: note: in expansion of macro 'offsetof'
 1466 |                                0xf000 | offsetof(struct prog_frame,
      |                                         ^~~~~~~~
arch/s390/net/bpf_jit_comp.c: In function '__arch_prepare_bpf_trampoline':
include/linux/stddef.h:16:33: error: invalid use of undefined type
'struct prog_frame'
   16 | #define offsetof(TYPE, MEMBER)  __builtin_offsetof(TYPE, MEMBER)
      |                                 ^~~~~~~~~~~~~~~~~~
arch/s390/net/bpf_jit_comp.c:209:59: note: in definition of macro '_EMIT6'
  209 |                 *(u16 *) (jit->prg_buf + jit->prg + 4) = (op2); \
      |                                                           ^~~
arch/s390/net/bpf_jit_comp.c:2447:33: note: in expansion of macro 'offsetof'
 2447 |                        0xf000 | offsetof(struct prog_frame,
tail_call_cnt));
      |                                 ^~~~~~~~
make[5]: *** [scripts/Makefile.build:243: arch/s390/net/bpf_jit_comp.o] Error 1

The git blame is pointing to,
 $ git blame -L 1463 arch/s390/net/bpf_jit_comp.c
   987b48ef91346f Ilya Leoshkevich _EMIT6(0xd203f000 | (jit->frame_off +

Commit pointing to,
   s390/bpf: Write back tail call counter for BPF_PSEUDO_CALL
   [ Upstream commit c861a6b147137d10b5ff88a2c492ba376cd1b8b0 ]

## Build
* kernel: 6.6.112-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git commit: 07c1c4215e9202defca86827ce9e9c920c3596b9
* git describe: v6.6.111-197-g07c1c4215e92
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.6.y/build/v6.6.111-197-g07c1c4215e92

## Test Regressions (compared to v6.6.109-37-g65af00078567)

* s390, build
  - clang-21-defconfig
  - clang-nightly-defconfig
  - gcc-14-allmodconfig
  - gcc-14-defconfig
  - gcc-8-defconfig-fe40093d

## Metric Regressions (compared to v6.6.109-37-g65af00078567)

## Test Fixes (compared to v6.6.109-37-g65af00078567)

## Metric Fixes (compared to v6.6.109-37-g65af00078567)

## Test result summary
total: 131194, pass: 109732, fail: 4948, skip: 16043, xfail: 471

## Build Summary
* arc: 5 total, 5 passed, 0 failed
* arm: 129 total, 128 passed, 1 failed
* arm64: 44 total, 40 passed, 4 failed
* i386: 23 total, 23 passed, 0 failed
* mips: 26 total, 25 passed, 1 failed
* parisc: 4 total, 4 passed, 0 failed
* powerpc: 32 total, 31 passed, 1 failed
* riscv: 15 total, 14 passed, 1 failed
* s390: 14 total, 8 passed, 6 failed
* sh: 10 total, 10 passed, 0 failed
* sparc: 7 total, 7 passed, 0 failed
* x86_64: 37 total, 34 passed, 3 failed

## Test suites summary
* boot
* commands
* kselftest-arm64
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-efivarfs
* kselftest-exec
* kselftest-fpu
* kselftest-ftrace
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-kcmp
* kselftest-kvm
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-mincore
* kselftest-mm
* kselftest-mqueue
* kselftest-net
* kselftest-net-mptcp
* kselftest-openat2
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-tc-testing
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user_events
* kselftest-vDSO
* kselftest-x86
* kunit
* kvm-unit-tests
* lava
* libgpiod
* libhugetlbfs
* log-parser-boot
* log-parser-build-clang
* log-parser-build-gcc
* log-parser-test
* ltp-capability
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-hugetlb
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-pty
* ltp-sched
* ltp-smoke
* ltp-syscalls
* ltp-tracing
* perf
* rcutorture

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 6.6 000/196] 6.6.112-rc1 review

[Jon Hunter]

On Mon, 13 Oct 2025 16:43:11 +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.6.112 release.
> There are 196 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 15 Oct 2025 14:42:41 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.112-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v6.6:
    10 builds:	10 pass, 0 fail
    28 boots:	28 pass, 0 fail
    120 tests:	120 pass, 0 fail

Linux version:	6.6.112-rc1-g07c1c4215e92
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra186-p3509-0000+p3636-0001, tegra194-p2972-0000,
                tegra194-p3509-0000+p3668-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra210-p3450-0000,
                tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon

Re: [PATCH 6.6 000/196] 6.6.112-rc1 review

[Ron Economos]

On 10/13/25 07:43, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.6.112 release.
> There are 196 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 15 Oct 2025 14:42:41 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.112-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Built and booted successfully on RISC-V RV64 (HiFive Unmatched).

Tested-by: Ron Economos <re@w6rz.net>

Re: [PATCH 6.6 000/196] 6.6.112-rc1 review

[Shuah Khan]

On 10/13/25 08:43, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.6.112 release.
> There are 196 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 15 Oct 2025 14:42:41 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.112-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 6.6 000/196] 6.6.112-rc1 review

[Miguel Ojeda]

On Mon, 13 Oct 2025 16:43:11 +0200 Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 6.6.112 release.
> There are 196 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 15 Oct 2025 14:42:41 +0000.
> Anything received after that time might be too late.

Boot-tested under QEMU for Rust x86_64:

Tested-by: Miguel Ojeda <ojeda@kernel.org>

Thanks!

Cheers,
Miguel