[PATCH 5.10 302/332] serial: 8250_exar: add support for Advantech 2 port card with Device ID 0x0018

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Florian Eckert <fe@dev.tdt.de>

commit e7cbce761fe3fcbcb49bcf30d4f8ca5e1a9ee2a0 upstream.

The Advantech 2-port serial card with PCI vendor=0x13fe and device=0x0018
has a 'XR17V35X' chip installed on the circuit board. Therefore, this
driver can be used instead of theu outdated out-of-tree driver from the
manufacturer.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20250924134115.2667650-1-fe@dev.tdt.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/8250/8250_exar.c |   11 +++++++++++
 1 file changed, 11 insertions(+)

--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -33,6 +33,8 @@
 #define PCI_DEVICE_ID_ACCESSIO_COM_4SM		0x10db
 #define PCI_DEVICE_ID_ACCESSIO_COM_8SM		0x10ea
 
+#define PCI_DEVICE_ID_ADVANTECH_XR17V352	0x0018
+
 #define PCI_DEVICE_ID_COMMTECH_4224PCI335	0x0002
 #define PCI_DEVICE_ID_COMMTECH_4222PCI335	0x0004
 #define PCI_DEVICE_ID_COMMTECH_2324PCI335	0x000a
@@ -815,6 +817,12 @@ static const struct exar8250_board pbn_f
 	.exit		= pci_xr17v35x_exit,
 };
 
+static const struct exar8250_board pbn_adv_XR17V352 = {
+	.num_ports	= 2,
+	.setup		= pci_xr17v35x_setup,
+	.exit		= pci_xr17v35x_exit,
+};
+
 static const struct exar8250_board pbn_exar_XR17V4358 = {
 	.num_ports	= 12,
 	.setup		= pci_xr17v35x_setup,
@@ -884,6 +892,9 @@ static const struct pci_device_id exar_p
 	USR_DEVICE(XR17C152, 2980, pbn_exar_XR17C15x),
 	USR_DEVICE(XR17C152, 2981, pbn_exar_XR17C15x),
 
+	/* ADVANTECH devices */
+	EXAR_DEVICE(ADVANTECH, XR17V352, pbn_adv_XR17V352),
+
 	/* Exar Corp. XR17C15[248] Dual/Quad/Octal UART */
 	EXAR_DEVICE(EXAR, XR17C152, pbn_exar_XR17C15x),
 	EXAR_DEVICE(EXAR, XR17C154, pbn_exar_XR17C15x),