[PATCH 6.18 00/29] 6.18.1-rc1 review

[PATCH 6.18 00/29] 6.18.1-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 6.18.1 release.
There are 29 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Fri, 12 Dec 2025 07:29:36 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.18.1-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.18.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 6.18.1-rc1

Navaneeth K <knavaneeth786@gmail.com>
    staging: rtl8723bs: fix out-of-bounds read in OnBeacon ESR IE parsing

Navaneeth K <knavaneeth786@gmail.com>
    staging: rtl8723bs: fix stack buffer overflow in OnAssocReq IE parsing

Navaneeth K <knavaneeth786@gmail.com>
    staging: rtl8723bs: fix out-of-bounds read in rtw_get_ie() parser

Nikita Zhandarovich <n.zhandarovich@fintech.ru>
    comedi: check device's attached status in compat ioctls

Nikita Zhandarovich <n.zhandarovich@fintech.ru>
    comedi: multiq3: sanitize config options in multiq3_attach()

Ian Abbott <abbotti@mev.co.uk>
    comedi: c6xdigio: Fix invalid PNP driver unregistration

Antoniu Miclaus <antoniu.miclaus@analog.com>
    iio: adc: ad4080: fix chip identification

Zenm Chen <zenmchen@gmail.com>
    wifi: rtw88: Add USB ID 2001:3329 for D-Link AC13U rev. A1

Zenm Chen <zenmchen@gmail.com>
    wifi: rtl8xxxu: Add USB ID 2001:3328 for D-Link AN3U rev. A1

Gopi Krishna Menon <krishnagopi487@gmail.com>
    Documentation/rtla: rename common_xxx.rst files to common_xxx.txt

Johan Hovold <johan@kernel.org>
    USB: serial: kobil_sct: fix TIOCMBIS and TIOCMBIC

Johan Hovold <johan@kernel.org>
    USB: serial: belkin_sa: fix TIOCMBIS and TIOCMBIC

Biju Das <biju.das.jz@bp.renesas.com>
    serial: sh-sci: Fix deadlock during RSCI FIFO overrun error

Biju Das <biju.das.jz@bp.renesas.com>
    dt-bindings: serial: rsci: Drop "uart-has-rtscts: false"

Magne Bruno <magne.bruno@addi-data.com>
    serial: add support of CPCI cards

Johan Hovold <johan@kernel.org>
    USB: serial: ftdi_sio: match on interface number for jtag

Fabio Porcedda <fabio.porcedda@gmail.com>
    USB: serial: option: move Telit 0x10c7 composition in the right place

Fabio Porcedda <fabio.porcedda@gmail.com>
    USB: serial: option: add Telit Cinterion FE910C04 new compositions

Slark Xiao <slark_xiao@163.com>
    USB: serial: option: add Foxconn T99W760

Omar Sandoval <osandov@fb.com>
    KVM: SVM: Don't skip unrelated instruction if INT3/INTO is replaced

Nikita Zhandarovich <n.zhandarovich@fintech.ru>
    comedi: pcl818: fix null-ptr-deref in pcl818_ai_cancel()

Alice Ryhl <aliceryhl@google.com>
    rust_binder: fix race condition on death_list

Alexey Nepomnyashih <sdl@nppct.ru>
    ext4: add i_data_sem protection in ext4_destroy_inline_data_nolock()

Giovanni Cabiddu <giovanni.cabiddu@intel.com>
    crypto: zstd - fix double-free in per-CPU stream cleanup

Alexander Sverdlin <alexander.sverdlin@gmail.com>
    locking/spinlock/debug: Fix data-race in do_raw_write_lock

Qianchang Zhao <pioooooooooip@gmail.com>
    ksmbd: ipc: fix use-after-free in ipc_msg_send_request

Deepanshu Kartikey <kartikey406@gmail.com>
    ext4: refresh inline data size before write operations

Ye Bin <yebin10@huawei.com>
    jbd2: avoid bug_on in jbd2_journal_get_create_access() when file system corrupted

Bagas Sanjaya <bagasdotme@gmail.com>
    Documentation: process: Also mention Sasha Levin as stable tree maintainer


-------------

Diffstat:

 .../devicetree/bindings/serial/renesas,rsci.yaml   |  2 -
 Documentation/process/2.Process.rst                |  6 +-
 .../{common_appendix.rst => common_appendix.txt}   |  0
 ...on_hist_options.rst => common_hist_options.txt} |  0
 .../{common_options.rst => common_options.txt}     |  0
 ...cription.rst => common_osnoise_description.txt} |  0
 ...oise_options.rst => common_osnoise_options.txt} |  0
 ...mmon_timerlat_aa.rst => common_timerlat_aa.txt} |  0
 ...ription.rst => common_timerlat_description.txt} |  0
 ...lat_options.rst => common_timerlat_options.txt} |  0
 ...mmon_top_options.rst => common_top_options.txt} |  0
 Documentation/tools/rtla/rtla-hwnoise.rst          |  8 +--
 Documentation/tools/rtla/rtla-osnoise-hist.rst     | 10 +--
 Documentation/tools/rtla/rtla-osnoise-top.rst      | 10 +--
 Documentation/tools/rtla/rtla-osnoise.rst          |  4 +-
 Documentation/tools/rtla/rtla-timerlat-hist.rst    | 12 ++--
 Documentation/tools/rtla/rtla-timerlat-top.rst     | 12 ++--
 Documentation/tools/rtla/rtla-timerlat.rst         |  4 +-
 Documentation/tools/rtla/rtla.rst                  |  2 +-
 Makefile                                           |  4 +-
 arch/x86/include/asm/kvm_host.h                    |  9 +++
 arch/x86/kvm/svm/svm.c                             | 24 ++++----
 arch/x86/kvm/x86.c                                 | 21 +++++++
 crypto/zstd.c                                      |  7 +--
 drivers/android/binder/node.rs                     |  6 +-
 drivers/comedi/comedi_fops.c                       | 42 +++++++++++--
 drivers/comedi/drivers/c6xdigio.c                  | 46 ++++++++++----
 drivers/comedi/drivers/multiq3.c                   |  9 +++
 drivers/comedi/drivers/pcl818.c                    |  5 +-
 drivers/iio/adc/ad4080.c                           |  9 ++-
 drivers/net/wireless/realtek/rtl8xxxu/core.c       |  3 +
 drivers/net/wireless/realtek/rtw88/rtw8822cu.c     |  2 +
 drivers/staging/rtl8723bs/core/rtw_ieee80211.c     | 14 +++--
 drivers/staging/rtl8723bs/core/rtw_mlme_ext.c      | 13 ++--
 drivers/tty/serial/8250/8250_pci.c                 | 37 +++++++++++
 drivers/tty/serial/sh-sci.c                        | 12 +++-
 drivers/usb/serial/belkin_sa.c                     | 28 +++++----
 drivers/usb/serial/ftdi_sio.c                      | 72 ++++++++--------------
 drivers/usb/serial/kobil_sct.c                     | 18 +++---
 drivers/usb/serial/option.c                        | 22 ++++++-
 fs/ext4/inline.c                                   | 14 ++++-
 fs/jbd2/transaction.c                              | 19 ++++--
 fs/smb/server/transport_ipc.c                      |  7 ++-
 kernel/locking/spinlock_debug.c                    |  4 +-
 44 files changed, 343 insertions(+), 174 deletions(-)

[PATCH 6.18 01/29] Documentation: process: Also mention Sasha Levin as stable tree maintainer

[Greg Kroah-Hartman]

6.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bagas Sanjaya <bagasdotme@gmail.com>

commit ba2457109d5b47a90fe565b39524f7225fc23e60 upstream.

Sasha has also maintaining stable branch in conjunction with Greg
since cb5d21946d2a2f ("MAINTAINERS: Add Sasha as a stable branch
maintainer"). Mention him in 2.Process.rst.

Cc: stable@vger.kernel.org
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251022034336.22839-1-bagasdotme@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Documentation/process/2.Process.rst |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/Documentation/process/2.Process.rst
+++ b/Documentation/process/2.Process.rst
@@ -104,8 +104,10 @@ kernels go out with a handful of known r
 of them are serious.
 
 Once a stable release is made, its ongoing maintenance is passed off to the
-"stable team," currently Greg Kroah-Hartman. The stable team will release
-occasional updates to the stable release using the 5.x.y numbering scheme.
+"stable team," currently consists of Greg Kroah-Hartman and Sasha Levin. The
+stable team will release occasional updates to the stable release using the
+5.x.y numbering scheme.
+
 To be considered for an update release, a patch must (1) fix a significant
 bug, and (2) already be merged into the mainline for the next development
 kernel. Kernels will typically receive stable updates for a little more

[PATCH 6.18 02/29] jbd2: avoid bug_on in jbd2_journal_get_create_access() when file system corrupted

[Greg Kroah-Hartman]

6.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ye Bin <yebin10@huawei.com>

commit 986835bf4d11032bba4ab8414d18fce038c61bb4 upstream.

There's issue when file system corrupted:
------------[ cut here ]------------
kernel BUG at fs/jbd2/transaction.c:1289!
Oops: invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 5 UID: 0 PID: 2031 Comm: mkdir Not tainted 6.18.0-rc1-next
RIP: 0010:jbd2_journal_get_create_access+0x3b6/0x4d0
RSP: 0018:ffff888117aafa30 EFLAGS: 00010202
RAX: 0000000000000000 RBX: ffff88811a86b000 RCX: ffffffff89a63534
RDX: 1ffff110200ec602 RSI: 0000000000000004 RDI: ffff888100763010
RBP: ffff888100763000 R08: 0000000000000001 R09: ffff888100763028
R10: 0000000000000003 R11: 0000000000000000 R12: 0000000000000000
R13: ffff88812c432000 R14: ffff88812c608000 R15: ffff888120bfc000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f91d6970c99 CR3: 00000001159c4000 CR4: 00000000000006f0
Call Trace:
 <TASK>
 __ext4_journal_get_create_access+0x42/0x170
 ext4_getblk+0x319/0x6f0
 ext4_bread+0x11/0x100
 ext4_append+0x1e6/0x4a0
 ext4_init_new_dir+0x145/0x1d0
 ext4_mkdir+0x326/0x920
 vfs_mkdir+0x45c/0x740
 do_mkdirat+0x234/0x2f0
 __x64_sys_mkdir+0xd6/0x120
 do_syscall_64+0x5f/0xfa0
 entry_SYSCALL_64_after_hwframe+0x76/0x7e

The above issue occurs with us in errors=continue mode when accompanied by
storage failures. There have been many inconsistencies in the file system
data.
In the case of file system data inconsistency, for example, if the block
bitmap of a referenced block is not set, it can lead to the situation where
a block being committed is allocated and used again. As a result, the
following condition will not be satisfied then trigger BUG_ON. Of course,
it is entirely possible to construct a problematic image that can trigger
this BUG_ON through specific operations. In fact, I have constructed such
an image and easily reproduced this issue.
Therefore, J_ASSERT() holds true only under ideal conditions, but it may
not necessarily be satisfied in exceptional scenarios. Using J_ASSERT()
directly in abnormal situations would cause the system to crash, which is
clearly not what we want. So here we directly trigger a JBD abort instead
of immediately invoking BUG_ON.

Fixes: 470decc613ab ("[PATCH] jbd2: initial copy of files from jbd")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20251025072657.307851-1-yebin@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/jbd2/transaction.c |   19 ++++++++++++++-----
 1 file changed, 14 insertions(+), 5 deletions(-)

--- a/fs/jbd2/transaction.c
+++ b/fs/jbd2/transaction.c
@@ -1284,14 +1284,23 @@ int jbd2_journal_get_create_access(handl
 	 * committing transaction's lists, but it HAS to be in Forget state in
 	 * that case: the transaction must have deleted the buffer for it to be
 	 * reused here.
+	 * In the case of file system data inconsistency, for example, if the
+	 * block bitmap of a referenced block is not set, it can lead to the
+	 * situation where a block being committed is allocated and used again.
+	 * As a result, the following condition will not be satisfied, so here
+	 * we directly trigger a JBD abort instead of immediately invoking
+	 * bugon.
 	 */
 	spin_lock(&jh->b_state_lock);
-	J_ASSERT_JH(jh, (jh->b_transaction == transaction ||
-		jh->b_transaction == NULL ||
-		(jh->b_transaction == journal->j_committing_transaction &&
-			  jh->b_jlist == BJ_Forget)));
+	if (!(jh->b_transaction == transaction || jh->b_transaction == NULL ||
+	      (jh->b_transaction == journal->j_committing_transaction &&
+	       jh->b_jlist == BJ_Forget)) || jh->b_next_transaction != NULL) {
+		err = -EROFS;
+		spin_unlock(&jh->b_state_lock);
+		jbd2_journal_abort(journal, err);
+		goto out;
+	}
 
-	J_ASSERT_JH(jh, jh->b_next_transaction == NULL);
 	J_ASSERT_JH(jh, buffer_locked(jh2bh(jh)));
 
 	if (jh->b_transaction == NULL) {

[PATCH 6.18 03/29] ext4: refresh inline data size before write operations

[Greg Kroah-Hartman]

6.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Deepanshu Kartikey <kartikey406@gmail.com>

commit 892e1cf17555735e9d021ab036c36bc7b58b0e3b upstream.

The cached ei->i_inline_size can become stale between the initial size
check and when ext4_update_inline_data()/ext4_create_inline_data() use
it. Although ext4_get_max_inline_size() reads the correct value at the
time of the check, concurrent xattr operations can modify i_inline_size
before ext4_write_lock_xattr() is acquired.

This causes ext4_update_inline_data() and ext4_create_inline_data() to
work with stale capacity values, leading to a BUG_ON() crash in
ext4_write_inline_data():

  kernel BUG at fs/ext4/inline.c:1331!
  BUG_ON(pos + len > EXT4_I(inode)->i_inline_size);

The race window:
1. ext4_get_max_inline_size() reads i_inline_size = 60 (correct)
2. Size check passes for 50-byte write
3. [Another thread adds xattr, i_inline_size changes to 40]
4. ext4_write_lock_xattr() acquires lock
5. ext4_update_inline_data() uses stale i_inline_size = 60
6. Attempts to write 50 bytes but only 40 bytes actually available
7. BUG_ON() triggers

Fix this by recalculating i_inline_size via ext4_find_inline_data_nolock()
immediately after acquiring xattr_sem. This ensures ext4_update_inline_data()
and ext4_create_inline_data() work with current values that are protected
from concurrent modifications.

This is similar to commit a54c4613dac1 ("ext4: fix race writing to an
inline_data file while its xattrs are changing") which fixed i_inline_off
staleness. This patch addresses the related i_inline_size staleness issue.

Reported-by: syzbot+f3185be57d7e8dda32b8@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=f3185be57d7e8dda32b8
Cc: stable@kernel.org
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Message-ID: <20251020060936.474314-1-kartikey406@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/inline.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/fs/ext4/inline.c
+++ b/fs/ext4/inline.c
@@ -418,7 +418,12 @@ static int ext4_prepare_inline_data(hand
 		return -ENOSPC;
 
 	ext4_write_lock_xattr(inode, &no_expand);
-
+	/*
+	 * ei->i_inline_size may have changed since the initial check
+	 * if other xattrs were added. Recalculate to ensure
+	 * ext4_update_inline_data() validates against current capacity.
+	 */
+	(void) ext4_find_inline_data_nolock(inode);
 	if (ei->i_inline_off)
 		ret = ext4_update_inline_data(handle, inode, len);
 	else

[PATCH 6.18 04/29] ksmbd: ipc: fix use-after-free in ipc_msg_send_request

[Greg Kroah-Hartman]

6.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Qianchang Zhao <pioooooooooip@gmail.com>

commit 1fab1fa091f5aa97265648b53ea031deedd26235 upstream.

ipc_msg_send_request() waits for a generic netlink reply using an
ipc_msg_table_entry on the stack. The generic netlink handler
(handle_generic_event()/handle_response()) fills entry->response under
ipc_msg_table_lock, but ipc_msg_send_request() used to validate and free
entry->response without holding the same lock.

Under high concurrency this allows a race where handle_response() is
copying data into entry->response while ipc_msg_send_request() has just
freed it, leading to a slab-use-after-free reported by KASAN in
handle_generic_event():

  BUG: KASAN: slab-use-after-free in handle_generic_event+0x3c4/0x5f0 [ksmbd]
  Write of size 12 at addr ffff888198ee6e20 by task pool/109349
  ...
  Freed by task:
    kvfree
    ipc_msg_send_request [ksmbd]
    ksmbd_rpc_open -> ksmbd_session_rpc_open [ksmbd]

Fix by:
- Taking ipc_msg_table_lock in ipc_msg_send_request() while validating
  entry->response, freeing it when invalid, and removing the entry from
  ipc_msg_table.
- Returning the final entry->response pointer to the caller only after
  the hash entry is removed under the lock.
- Returning NULL in the error path, preserving the original API
  semantics.

This makes all accesses to entry->response consistent with
handle_response(), which already updates and fills the response buffer
under ipc_msg_table_lock, and closes the race that allowed the UAF.

Cc: stable@vger.kernel.org
Reported-by: Qianchang Zhao <pioooooooooip@gmail.com>
Reported-by: Zhitong Liu <liuzhitong1993@gmail.com>
Signed-off-by: Qianchang Zhao <pioooooooooip@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/smb/server/transport_ipc.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/fs/smb/server/transport_ipc.c
+++ b/fs/smb/server/transport_ipc.c
@@ -553,12 +553,16 @@ static void *ipc_msg_send_request(struct
 	up_write(&ipc_msg_table_lock);
 
 	ret = ipc_msg_send(msg);
-	if (ret)
+	if (ret) {
+		down_write(&ipc_msg_table_lock);
 		goto out;
+	}
 
 	ret = wait_event_interruptible_timeout(entry.wait,
 					       entry.response != NULL,
 					       IPC_WAIT_TIMEOUT);
+
+	down_write(&ipc_msg_table_lock);
 	if (entry.response) {
 		ret = ipc_validate_msg(&entry);
 		if (ret) {
@@ -567,7 +571,6 @@ static void *ipc_msg_send_request(struct
 		}
 	}
 out:
-	down_write(&ipc_msg_table_lock);
 	hash_del(&entry.ipc_table_hlist);
 	up_write(&ipc_msg_table_lock);
 	return entry.response;

[PATCH 6.18 05/29] locking/spinlock/debug: Fix data-race in do_raw_write_lock

[Greg Kroah-Hartman]

6.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexander Sverdlin <alexander.sverdlin@siemens.com>

commit c14ecb555c3ee80eeb030a4e46d00e679537f03a upstream.

KCSAN reports:

BUG: KCSAN: data-race in do_raw_write_lock / do_raw_write_lock

write (marked) to 0xffff800009cf504c of 4 bytes by task 1102 on cpu 1:
 do_raw_write_lock+0x120/0x204
 _raw_write_lock_irq
 do_exit
 call_usermodehelper_exec_async
 ret_from_fork

read to 0xffff800009cf504c of 4 bytes by task 1103 on cpu 0:
 do_raw_write_lock+0x88/0x204
 _raw_write_lock_irq
 do_exit
 call_usermodehelper_exec_async
 ret_from_fork

value changed: 0xffffffff -> 0x00000001

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 1103 Comm: kworker/u4:1 6.1.111

Commit 1a365e822372 ("locking/spinlock/debug: Fix various data races") has
adressed most of these races, but seems to be not consistent/not complete.

>From do_raw_write_lock() only debug_write_lock_after() part has been
converted to WRITE_ONCE(), but not debug_write_lock_before() part.
Do it now.

Fixes: 1a365e822372 ("locking/spinlock/debug: Fix various data races")
Reported-by: Adrian Freihofer <adrian.freihofer@siemens.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Waiman Long <longman@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/locking/spinlock_debug.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/kernel/locking/spinlock_debug.c
+++ b/kernel/locking/spinlock_debug.c
@@ -184,8 +184,8 @@ void do_raw_read_unlock(rwlock_t *lock)
 static inline void debug_write_lock_before(rwlock_t *lock)
 {
 	RWLOCK_BUG_ON(lock->magic != RWLOCK_MAGIC, lock, "bad magic");
-	RWLOCK_BUG_ON(lock->owner == current, lock, "recursion");
-	RWLOCK_BUG_ON(lock->owner_cpu == raw_smp_processor_id(),
+	RWLOCK_BUG_ON(READ_ONCE(lock->owner) == current, lock, "recursion");
+	RWLOCK_BUG_ON(READ_ONCE(lock->owner_cpu) == raw_smp_processor_id(),
 							lock, "cpu recursion");
 }
 

[PATCH 6.18 06/29] crypto: zstd - fix double-free in per-CPU stream cleanup

[Greg Kroah-Hartman]

6.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Giovanni Cabiddu <giovanni.cabiddu@intel.com>

commit 48bc9da3c97c15f1ea24934bcb3b736acd30163d upstream.

The crypto/zstd module has a double-free bug that occurs when multiple
tfms are allocated and freed.

The issue happens because zstd_streams (per-CPU contexts) are freed in
zstd_exit() during every tfm destruction, rather than being managed at
the module level.  When multiple tfms exist, each tfm exit attempts to
free the same shared per-CPU streams, resulting in a double-free.

This leads to a stack trace similar to:

  BUG: Bad page state in process kworker/u16:1  pfn:106fd93
  page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x106fd93
  flags: 0x17ffffc0000000(node=0|zone=2|lastcpupid=0x1fffff)
  page_type: 0xffffffff()
  raw: 0017ffffc0000000 dead000000000100 dead000000000122 0000000000000000
  raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
  page dumped because: nonzero entire_mapcount
  Modules linked in: ...
  CPU: 3 UID: 0 PID: 2506 Comm: kworker/u16:1 Kdump: loaded Tainted: G    B
  Hardware name: ...
  Workqueue: btrfs-delalloc btrfs_work_helper
  Call Trace:
   <TASK>
   dump_stack_lvl+0x5d/0x80
   bad_page+0x71/0xd0
   free_unref_page_prepare+0x24e/0x490
   free_unref_page+0x60/0x170
   crypto_acomp_free_streams+0x5d/0xc0
   crypto_acomp_exit_tfm+0x23/0x50
   crypto_destroy_tfm+0x60/0xc0
   ...

Change the lifecycle management of zstd_streams to free the streams only
once during module cleanup.

Fixes: f5ad93ffb541 ("crypto: zstd - convert to acomp")
Cc: stable@vger.kernel.org
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 crypto/zstd.c |    7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

--- a/crypto/zstd.c
+++ b/crypto/zstd.c
@@ -75,11 +75,6 @@ static int zstd_init(struct crypto_acomp
 	return ret;
 }
 
-static void zstd_exit(struct crypto_acomp *acomp_tfm)
-{
-	crypto_acomp_free_streams(&zstd_streams);
-}
-
 static int zstd_compress_one(struct acomp_req *req, struct zstd_ctx *ctx,
 			     const void *src, void *dst, unsigned int *dlen)
 {
@@ -297,7 +292,6 @@ static struct acomp_alg zstd_acomp = {
 		.cra_module = THIS_MODULE,
 	},
 	.init = zstd_init,
-	.exit = zstd_exit,
 	.compress = zstd_compress,
 	.decompress = zstd_decompress,
 };
@@ -310,6 +304,7 @@ static int __init zstd_mod_init(void)
 static void __exit zstd_mod_fini(void)
 {
 	crypto_unregister_acomp(&zstd_acomp);
+	crypto_acomp_free_streams(&zstd_streams);
 }
 
 module_init(zstd_mod_init);

[PATCH 6.18 07/29] ext4: add i_data_sem protection in ext4_destroy_inline_data_nolock()

[Greg Kroah-Hartman]

6.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexey Nepomnyashih <sdl@nppct.ru>

commit 0cd8feea8777f8d9b9a862b89c688b049a5c8475 upstream.

Fix a race between inline data destruction and block mapping.

The function ext4_destroy_inline_data_nolock() changes the inode data
layout by clearing EXT4_INODE_INLINE_DATA and setting EXT4_INODE_EXTENTS.
At the same time, another thread may execute ext4_map_blocks(), which
tests EXT4_INODE_EXTENTS to decide whether to call ext4_ext_map_blocks()
or ext4_ind_map_blocks().

Without i_data_sem protection, ext4_ind_map_blocks() may receive inode
with EXT4_INODE_EXTENTS flag and triggering assert.

kernel BUG at fs/ext4/indirect.c:546!
EXT4-fs (loop2): unmounting filesystem.
invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
RIP: 0010:ext4_ind_map_blocks.cold+0x2b/0x5a fs/ext4/indirect.c:546

Call Trace:
 <TASK>
 ext4_map_blocks+0xb9b/0x16f0 fs/ext4/inode.c:681
 _ext4_get_block+0x242/0x590 fs/ext4/inode.c:822
 ext4_block_write_begin+0x48b/0x12c0 fs/ext4/inode.c:1124
 ext4_write_begin+0x598/0xef0 fs/ext4/inode.c:1255
 ext4_da_write_begin+0x21e/0x9c0 fs/ext4/inode.c:3000
 generic_perform_write+0x259/0x5d0 mm/filemap.c:3846
 ext4_buffered_write_iter+0x15b/0x470 fs/ext4/file.c:285
 ext4_file_write_iter+0x8e0/0x17f0 fs/ext4/file.c:679
 call_write_iter include/linux/fs.h:2271 [inline]
 do_iter_readv_writev+0x212/0x3c0 fs/read_write.c:735
 do_iter_write+0x186/0x710 fs/read_write.c:861
 vfs_iter_write+0x70/0xa0 fs/read_write.c:902
 iter_file_splice_write+0x73b/0xc90 fs/splice.c:685
 do_splice_from fs/splice.c:763 [inline]
 direct_splice_actor+0x10f/0x170 fs/splice.c:950
 splice_direct_to_actor+0x33a/0xa10 fs/splice.c:896
 do_splice_direct+0x1a9/0x280 fs/splice.c:1002
 do_sendfile+0xb13/0x12c0 fs/read_write.c:1255
 __do_sys_sendfile64 fs/read_write.c:1323 [inline]
 __se_sys_sendfile64 fs/read_write.c:1309 [inline]
 __x64_sys_sendfile64+0x1cf/0x210 fs/read_write.c:1309
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x35/0x80 arch/x86/entry/common.c:81
 entry_SYSCALL_64_after_hwframe+0x6e/0xd8

Fixes: c755e251357a ("ext4: fix deadlock between inline_data and ext4_expand_extra_isize_ea()")
Cc: stable@vger.kernel.org # v4.11+
Signed-off-by: Alexey Nepomnyashih <sdl@nppct.ru>
Message-ID: <20251104093326.697381-1-sdl@nppct.ru>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/inline.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/fs/ext4/inline.c
+++ b/fs/ext4/inline.c
@@ -451,9 +451,13 @@ static int ext4_destroy_inline_data_nolo
 	if (!ei->i_inline_off)
 		return 0;
 
+	down_write(&ei->i_data_sem);
+
 	error = ext4_get_inode_loc(inode, &is.iloc);
-	if (error)
+	if (error) {
+		up_write(&ei->i_data_sem);
 		return error;
+	}
 
 	error = ext4_xattr_ibody_find(inode, &i, &is);
 	if (error)
@@ -492,6 +496,7 @@ out:
 	brelse(is.iloc.bh);
 	if (error == -ENODATA)
 		error = 0;
+	up_write(&ei->i_data_sem);
 	return error;
 }
 

[PATCH 6.18 08/29] rust_binder: fix race condition on death_list

[Greg Kroah-Hartman]

6.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alice Ryhl <aliceryhl@google.com>

commit 3e0ae02ba831da2b707905f4e602e43f8507b8cc upstream.

Rust Binder contains the following unsafe operation:

	// SAFETY: A `NodeDeath` is never inserted into the death list
	// of any node other than its owner, so it is either in this
	// death list or in no death list.
	unsafe { node_inner.death_list.remove(self) };

This operation is unsafe because when touching the prev/next pointers of
a list element, we have to ensure that no other thread is also touching
them in parallel. If the node is present in the list that `remove` is
called on, then that is fine because we have exclusive access to that
list. If the node is not in any list, then it's also ok. But if it's
present in a different list that may be accessed in parallel, then that
may be a data race on the prev/next pointers.

And unfortunately that is exactly what is happening here. In
Node::release, we:

 1. Take the lock.
 2. Move all items to a local list on the stack.
 3. Drop the lock.
 4. Iterate the local list on the stack.

Combined with threads using the unsafe remove method on the original
list, this leads to memory corruption of the prev/next pointers. This
leads to crashes like this one:

	Unable to handle kernel paging request at virtual address 000bb9841bcac70e
	Mem abort info:
	  ESR = 0x0000000096000044
	  EC = 0x25: DABT (current EL), IL = 32 bits
	  SET = 0, FnV = 0
	  EA = 0, S1PTW = 0
	  FSC = 0x04: level 0 translation fault
	Data abort info:
	  ISV = 0, ISS = 0x00000044, ISS2 = 0x00000000
	  CM = 0, WnR = 1, TnD = 0, TagAccess = 0
	  GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
	[000bb9841bcac70e] address between user and kernel address ranges
	Internal error: Oops: 0000000096000044 [#1] PREEMPT SMP
	google-cdd 538c004.gcdd: context saved(CPU:1)
	item - log_kevents is disabled
	Modules linked in: ... rust_binder
	CPU: 1 UID: 0 PID: 2092 Comm: kworker/1:178 Tainted: G S      W  OE      6.12.52-android16-5-g98debd5df505-4k #1 f94a6367396c5488d635708e43ee0c888d230b0b
	Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
	Hardware name: MUSTANG PVT 1.0 based on LGA (DT)
	Workqueue: events _RNvXs6_NtCsdfZWD8DztAw_6kernel9workqueueINtNtNtB7_4sync3arc3ArcNtNtCs8QPsHWIn21X_16rust_binder_main7process7ProcessEINtB5_15WorkItemPointerKy0_E3runB13_ [rust_binder]
	pstate: 23400005 (nzCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
	pc : _RNvXs3_NtCs8QPsHWIn21X_16rust_binder_main7processNtB5_7ProcessNtNtCsdfZWD8DztAw_6kernel9workqueue8WorkItem3run+0x450/0x11f8 [rust_binder]
	lr : _RNvXs3_NtCs8QPsHWIn21X_16rust_binder_main7processNtB5_7ProcessNtNtCsdfZWD8DztAw_6kernel9workqueue8WorkItem3run+0x464/0x11f8 [rust_binder]
	sp : ffffffc09b433ac0
	x29: ffffffc09b433d30 x28: ffffff8821690000 x27: ffffffd40cbaa448
	x26: ffffff8821690000 x25: 00000000ffffffff x24: ffffff88d0376578
	x23: 0000000000000001 x22: ffffffc09b433c78 x21: ffffff88e8f9bf40
	x20: ffffff88e8f9bf40 x19: ffffff882692b000 x18: ffffffd40f10bf00
	x17: 00000000c006287d x16: 00000000c006287d x15: 00000000000003b0
	x14: 0000000000000100 x13: 000000201cb79ae0 x12: fffffffffffffff0
	x11: 0000000000000000 x10: 0000000000000001 x9 : 0000000000000000
	x8 : b80bb9841bcac706 x7 : 0000000000000001 x6 : fffffffebee63f30
	x5 : 0000000000000000 x4 : 0000000000000001 x3 : 0000000000000000
	x2 : 0000000000004c31 x1 : ffffff88216900c0 x0 : ffffff88e8f9bf00
	Call trace:
	 _RNvXs3_NtCs8QPsHWIn21X_16rust_binder_main7processNtB5_7ProcessNtNtCsdfZWD8DztAw_6kernel9workqueue8WorkItem3run+0x450/0x11f8 [rust_binder bbc172b53665bbc815363b22e97e3f7e3fe971fc]
	 process_scheduled_works+0x1c4/0x45c
	 worker_thread+0x32c/0x3e8
	 kthread+0x11c/0x1c8
	 ret_from_fork+0x10/0x20
	Code: 94218d85 b4000155 a94026a8 d10102a0 (f9000509)
	---[ end trace 0000000000000000 ]---

Thus, modify Node::release to pop items directly off the original list.

Cc: stable@vger.kernel.org
Fixes: eafedbc7c050 ("rust_binder: add Rust Binder driver")
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://patch.msgid.link/20251111-binder-fix-list-remove-v1-1-8ed14a0da63d@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/android/binder/node.rs | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/android/binder/node.rs b/drivers/android/binder/node.rs
index 08d362deaf61..c26d113ede96 100644
--- a/drivers/android/binder/node.rs
+++ b/drivers/android/binder/node.rs
@@ -541,10 +541,10 @@ pub(crate) fn release(&self) {
             guard = self.owner.inner.lock();
         }
 
-        let death_list = core::mem::take(&mut self.inner.access_mut(&mut guard).death_list);
-        drop(guard);
-        for death in death_list {
+        while let Some(death) = self.inner.access_mut(&mut guard).death_list.pop_front() {
+            drop(guard);
             death.into_arc().set_dead();
+            guard = self.owner.inner.lock();
         }
     }
 
-- 
2.52.0

[PATCH 6.18 09/29] comedi: pcl818: fix null-ptr-deref in pcl818_ai_cancel()

[Greg Kroah-Hartman]

6.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nikita Zhandarovich <n.zhandarovich@fintech.ru>

commit a51f025b5038abd3d22eed2ede4cd46793d89565 upstream.

Syzbot identified an issue [1] in pcl818_ai_cancel(), which stems from
the fact that in case of early device detach via pcl818_detach(),
subdevice dev->read_subdev may not have initialized its pointer to
&struct comedi_async as intended. Thus, any such dereferencing of
&s->async->cmd will lead to general protection fault and kernel crash.

Mitigate this problem by removing a call to pcl818_ai_cancel() from
pcl818_detach() altogether. This way, if the subdevice setups its
support for async commands, everything async-related will be
handled via subdevice's own ->cancel() function in
comedi_device_detach_locked() even before pcl818_detach(). If no
support for asynchronous commands is provided, there is no need
to cancel anything either.

[1] Syzbot crash:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
CPU: 1 UID: 0 PID: 6050 Comm: syz.0.18 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025
RIP: 0010:pcl818_ai_cancel+0x69/0x3f0 drivers/comedi/drivers/pcl818.c:762
...
Call Trace:
 <TASK>
 pcl818_detach+0x66/0xd0 drivers/comedi/drivers/pcl818.c:1115
 comedi_device_detach_locked+0x178/0x750 drivers/comedi/drivers.c:207
 do_devconfig_ioctl drivers/comedi/comedi_fops.c:848 [inline]
 comedi_unlocked_ioctl+0xcde/0x1020 drivers/comedi/comedi_fops.c:2178
 vfs_ioctl fs/ioctl.c:51 [inline]
 __do_sys_ioctl fs/ioctl.c:597 [inline]
...

Reported-by: syzbot+fce5d9d5bd067d6fbe9b@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=fce5d9d5bd067d6fbe9b
Fixes: 00aba6e7b565 ("staging: comedi: pcl818: remove 'neverending_ai' from private data")
Cc: stable <stable@kernel.org>
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20251023141457.398685-1-n.zhandarovich@fintech.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/comedi/drivers/pcl818.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

--- a/drivers/comedi/drivers/pcl818.c
+++ b/drivers/comedi/drivers/pcl818.c
@@ -1111,10 +1111,9 @@ static void pcl818_detach(struct comedi_
 {
 	struct pcl818_private *devpriv = dev->private;
 
-	if (devpriv) {
-		pcl818_ai_cancel(dev, dev->read_subdev);
+	if (devpriv)
 		pcl818_reset(dev);
-	}
+
 	pcl818_free_dma(dev);
 	comedi_legacy_detach(dev);
 }

[PATCH 6.18 10/29] KVM: SVM: Dont skip unrelated instruction if INT3/INTO is replaced

[Greg Kroah-Hartman]

6.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Omar Sandoval <osandov@fb.com>

commit 4da3768e1820cf15cced390242d8789aed34f54d upstream.

When re-injecting a soft interrupt from an INT3, INT0, or (select) INTn
instruction, discard the exception and retry the instruction if the code
stream is changed (e.g. by a different vCPU) between when the CPU
executes the instruction and when KVM decodes the instruction to get the
next RIP.

As effectively predicted by commit 6ef88d6e36c2 ("KVM: SVM: Re-inject
INT3/INTO instead of retrying the instruction"), failure to verify that
the correct INTn instruction was decoded can effectively clobber guest
state due to decoding the wrong instruction and thus specifying the
wrong next RIP.

The bug most often manifests as "Oops: int3" panics on static branch
checks in Linux guests.  Enabling or disabling a static branch in Linux
uses the kernel's "text poke" code patching mechanism.  To modify code
while other CPUs may be executing that code, Linux (temporarily)
replaces the first byte of the original instruction with an int3 (opcode
0xcc), then patches in the new code stream except for the first byte,
and finally replaces the int3 with the first byte of the new code
stream.  If a CPU hits the int3, i.e. executes the code while it's being
modified, then the guest kernel must look up the RIP to determine how to
handle the #BP, e.g. by emulating the new instruction.  If the RIP is
incorrect, then this lookup fails and the guest kernel panics.

The bug reproduces almost instantly by hacking the guest kernel to
repeatedly check a static branch[1] while running a drgn script[2] on
the host to constantly swap out the memory containing the guest's TSS.

[1]: https://gist.github.com/osandov/44d17c51c28c0ac998ea0334edf90b5a
[2]: https://gist.github.com/osandov/10e45e45afa29b11e0c7209247afc00b

Fixes: 6ef88d6e36c2 ("KVM: SVM: Re-inject INT3/INTO instead of retrying the instruction")
Cc: stable@vger.kernel.org
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Link: https://patch.msgid.link/1cc6dcdf36e3add7ee7c8d90ad58414eeb6c3d34.1762278762.git.osandov@fb.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/include/asm/kvm_host.h |    9 +++++++++
 arch/x86/kvm/svm/svm.c          |   24 +++++++++++++-----------
 arch/x86/kvm/x86.c              |   21 +++++++++++++++++++++
 3 files changed, 43 insertions(+), 11 deletions(-)

--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -2143,6 +2143,11 @@ u64 vcpu_tsc_khz(struct kvm_vcpu *vcpu);
  *			     the gfn, i.e. retrying the instruction will hit a
  *			     !PRESENT fault, which results in a new shadow page
  *			     and sends KVM back to square one.
+ *
+ * EMULTYPE_SKIP_SOFT_INT - Set in combination with EMULTYPE_SKIP to only skip
+ *                          an instruction if it could generate a given software
+ *                          interrupt, which must be encoded via
+ *                          EMULTYPE_SET_SOFT_INT_VECTOR().
  */
 #define EMULTYPE_NO_DECODE	    (1 << 0)
 #define EMULTYPE_TRAP_UD	    (1 << 1)
@@ -2153,6 +2158,10 @@ u64 vcpu_tsc_khz(struct kvm_vcpu *vcpu);
 #define EMULTYPE_PF		    (1 << 6)
 #define EMULTYPE_COMPLETE_USER_EXIT (1 << 7)
 #define EMULTYPE_WRITE_PF_TO_SP	    (1 << 8)
+#define EMULTYPE_SKIP_SOFT_INT	    (1 << 9)
+
+#define EMULTYPE_SET_SOFT_INT_VECTOR(v)	((u32)((v) & 0xff) << 16)
+#define EMULTYPE_GET_SOFT_INT_VECTOR(e)	(((e) >> 16) & 0xff)
 
 static inline bool kvm_can_emulate_event_vectoring(int emul_type)
 {
--- a/arch/x86/kvm/svm/svm.c
+++ b/arch/x86/kvm/svm/svm.c
@@ -272,6 +272,7 @@ static void svm_set_interrupt_shadow(str
 }
 
 static int __svm_skip_emulated_instruction(struct kvm_vcpu *vcpu,
+					   int emul_type,
 					   bool commit_side_effects)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
@@ -293,7 +294,7 @@ static int __svm_skip_emulated_instructi
 		if (unlikely(!commit_side_effects))
 			old_rflags = svm->vmcb->save.rflags;
 
-		if (!kvm_emulate_instruction(vcpu, EMULTYPE_SKIP))
+		if (!kvm_emulate_instruction(vcpu, emul_type))
 			return 0;
 
 		if (unlikely(!commit_side_effects))
@@ -311,11 +312,13 @@ done:
 
 static int svm_skip_emulated_instruction(struct kvm_vcpu *vcpu)
 {
-	return __svm_skip_emulated_instruction(vcpu, true);
+	return __svm_skip_emulated_instruction(vcpu, EMULTYPE_SKIP, true);
 }
 
-static int svm_update_soft_interrupt_rip(struct kvm_vcpu *vcpu)
+static int svm_update_soft_interrupt_rip(struct kvm_vcpu *vcpu, u8 vector)
 {
+	const int emul_type = EMULTYPE_SKIP | EMULTYPE_SKIP_SOFT_INT |
+			      EMULTYPE_SET_SOFT_INT_VECTOR(vector);
 	unsigned long rip, old_rip = kvm_rip_read(vcpu);
 	struct vcpu_svm *svm = to_svm(vcpu);
 
@@ -331,7 +334,7 @@ static int svm_update_soft_interrupt_rip
 	 * in use, the skip must not commit any side effects such as clearing
 	 * the interrupt shadow or RFLAGS.RF.
 	 */
-	if (!__svm_skip_emulated_instruction(vcpu, !nrips))
+	if (!__svm_skip_emulated_instruction(vcpu, emul_type, !nrips))
 		return -EIO;
 
 	rip = kvm_rip_read(vcpu);
@@ -367,7 +370,7 @@ static void svm_inject_exception(struct
 	kvm_deliver_exception_payload(vcpu, ex);
 
 	if (kvm_exception_is_soft(ex->vector) &&
-	    svm_update_soft_interrupt_rip(vcpu))
+	    svm_update_soft_interrupt_rip(vcpu, ex->vector))
 		return;
 
 	svm->vmcb->control.event_inj = ex->vector
@@ -3633,11 +3636,12 @@ static bool svm_set_vnmi_pending(struct
 
 static void svm_inject_irq(struct kvm_vcpu *vcpu, bool reinjected)
 {
+	struct kvm_queued_interrupt *intr = &vcpu->arch.interrupt;
 	struct vcpu_svm *svm = to_svm(vcpu);
 	u32 type;
 
-	if (vcpu->arch.interrupt.soft) {
-		if (svm_update_soft_interrupt_rip(vcpu))
+	if (intr->soft) {
+		if (svm_update_soft_interrupt_rip(vcpu, intr->nr))
 			return;
 
 		type = SVM_EVTINJ_TYPE_SOFT;
@@ -3645,12 +3649,10 @@ static void svm_inject_irq(struct kvm_vc
 		type = SVM_EVTINJ_TYPE_INTR;
 	}
 
-	trace_kvm_inj_virq(vcpu->arch.interrupt.nr,
-			   vcpu->arch.interrupt.soft, reinjected);
+	trace_kvm_inj_virq(intr->nr, intr->soft, reinjected);
 	++vcpu->stat.irq_injections;
 
-	svm->vmcb->control.event_inj = vcpu->arch.interrupt.nr |
-				       SVM_EVTINJ_VALID | type;
+	svm->vmcb->control.event_inj = intr->nr | SVM_EVTINJ_VALID | type;
 }
 
 void svm_complete_interrupt_delivery(struct kvm_vcpu *vcpu, int delivery_mode,
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -9337,6 +9337,23 @@ static bool is_vmware_backdoor_opcode(st
 	return false;
 }
 
+static bool is_soft_int_instruction(struct x86_emulate_ctxt *ctxt,
+				    int emulation_type)
+{
+	u8 vector = EMULTYPE_GET_SOFT_INT_VECTOR(emulation_type);
+
+	switch (ctxt->b) {
+	case 0xcc:
+		return vector == BP_VECTOR;
+	case 0xcd:
+		return vector == ctxt->src.val;
+	case 0xce:
+		return vector == OF_VECTOR;
+	default:
+		return false;
+	}
+}
+
 /*
  * Decode an instruction for emulation.  The caller is responsible for handling
  * code breakpoints.  Note, manually detecting code breakpoints is unnecessary
@@ -9447,6 +9464,10 @@ int x86_emulate_instruction(struct kvm_v
 	 * injecting single-step #DBs.
 	 */
 	if (emulation_type & EMULTYPE_SKIP) {
+		if (emulation_type & EMULTYPE_SKIP_SOFT_INT &&
+		    !is_soft_int_instruction(ctxt, emulation_type))
+			return 0;
+
 		if (ctxt->mode != X86EMUL_MODE_PROT64)
 			ctxt->eip = (u32)ctxt->_eip;
 		else

[PATCH 6.18 11/29] USB: serial: option: add Foxconn T99W760

[Greg Kroah-Hartman]

6.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Slark Xiao <slark_xiao@163.com>

commit 7970b4969c4c99bcdaf105f9f39c6d2021f6d244 upstream.

T99W760 is designed based on Qualcomm SDX35 (5G redcap) chip. There are
three serial ports to be enumerated: Modem, NMEA and Diag.

test evidence as below:
T:  Bus=03 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=  4 Spd=5000  MxCh= 0
D:  Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0489 ProdID=e123 Rev=05.15
S:  Manufacturer=QCOM
S:  Product=SDXBAAGHA-IDP _SN:39A8D3E4
S:  SerialNumber=39a8d3e4
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=85(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=88(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms

0&1: MBIM, 2:Modem, 3:GNSS(non-serial port), 4: NMEA, 5:Diag

Signed-off-by: Slark Xiao <slark_xiao@163.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -2376,6 +2376,8 @@ static const struct usb_device_id option
 	  .driver_info = RSVD(3) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0f0, 0xff),			/* Foxconn T99W373 MBIM */
 	  .driver_info = RSVD(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe123, 0xff),			/* Foxconn T99W760 MBIM */
+	  .driver_info = RSVD(3) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe145, 0xff),			/* Foxconn T99W651 RNDIS */
 	  .driver_info = RSVD(5) | RSVD(6) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe15f, 0xff),                     /* Foxconn T99W709 */

[PATCH 6.18 12/29] USB: serial: option: add Telit Cinterion FE910C04 new compositions

[Greg Kroah-Hartman]

6.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Fabio Porcedda <fabio.porcedda@gmail.com>

commit c908039a29aa70870871f4848125b3d743f929bf upstream.

Add the following Telit Cinterion new compositions:

0x10c1: RNDIS + tty (AT/NMEA) + tty (AT) + tty (diag)
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=10c1 Rev=05.15
S:  Manufacturer=Telit Cinterion
S:  Product=FE910
S:  SerialNumber=f71b8b32
C:  #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

0x10c2: MBIM + tty (AT/NMEA) + tty (AT) + tty (diag)
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  8 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=10c2 Rev=05.15
S:  Manufacturer=Telit Cinterion
S:  Product=FE910
S:  SerialNumber=f71b8b32
C:  #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

0x10c3: ECM + tty (AT/NMEA) + tty (AT) + tty (diag)
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  9 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=10c3 Rev=05.15
S:  Manufacturer=Telit Cinterion
S:  Product=FE910
S:  SerialNumber=f71b8b32
C:  #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
E:  Ad=82(I) Atr=03(Int.) MxPS=  16 Ivl=32ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

0x10c5: RNDIS + tty (AT) + tty (AT) + tty (diag)
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 10 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=10c5 Rev=05.15
S:  Manufacturer=Telit Cinterion
S:  Product=FE910
S:  SerialNumber=f71b8b32
C:  #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

0x10c6: MBIM + tty (AT) + tty (AT) + tty (diag)
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 11 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=10c6 Rev=05.15
S:  Manufacturer=Telit Cinterion
S:  Product=FE910
S:  SerialNumber=f71b8b32
C:  #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

0x10c9: MBIM + tty (AT) + tty (diag) + DPL (Data Packet Logging) + adb
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 13 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=10c9 Rev=05.15
S:  Manufacturer=Telit Cinterion
S:  Product=FE910
S:  SerialNumber=f71b8b32
C:  #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

0x10cb: RNDIS + tty (AT) + tty (diag) + DPL (Data Packet Logging) + adb
T:  Bus=01 Lev=01 Prnt=01 Port=09 Cnt=01 Dev#=  9 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=10cb Rev=05.15
S:  Manufacturer=Telit Cinterion
S:  Product=FE910
S:  SerialNumber=f71b8b32
C:  #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Cc: stable@vger.kernel.org
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c |   14 ++++++++++++++
 1 file changed, 14 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1433,10 +1433,24 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b3, 0xff, 0xff, 0x60) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c0, 0xff),	/* Telit FE910C04 (rmnet) */
 	  .driver_info = RSVD(0) | NCTRL(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c1, 0xff),	/* Telit FE910C04 (RNDIS) */
+	  .driver_info = NCTRL(4) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c2, 0xff),	/* Telit FE910C04 (MBIM) */
+	  .driver_info = NCTRL(4) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c3, 0xff),	/* Telit FE910C04 (ECM) */
+	  .driver_info = NCTRL(4) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c4, 0xff),	/* Telit FE910C04 (rmnet) */
 	  .driver_info = RSVD(0) | NCTRL(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c5, 0xff),	/* Telit FE910C04 (RNDIS) */
+	  .driver_info = NCTRL(4) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c6, 0xff),	/* Telit FE910C04 (MBIM) */
+	  .driver_info = NCTRL(4) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c8, 0xff),	/* Telit FE910C04 (rmnet) */
 	  .driver_info = RSVD(0) | NCTRL(2) | RSVD(3) | RSVD(4) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c9, 0xff),	/* Telit FE910C04 (MBIM) */
+	  .driver_info = NCTRL(3) | RSVD(4) | RSVD(5) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10cb, 0xff),	/* Telit FE910C04 (RNDIS) */
+	  .driver_info = NCTRL(3) | RSVD(4) | RSVD(5) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d0, 0xff, 0xff, 0x30),	/* Telit FN990B (rmnet) */
 	  .driver_info = NCTRL(5) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d0, 0xff, 0xff, 0x40) },

[PATCH 6.18 13/29] USB: serial: option: move Telit 0x10c7 composition in the right place

[Greg Kroah-Hartman]

6.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Fabio Porcedda <fabio.porcedda@gmail.com>

commit 072f2c49572547f4b0776fe2da6b8f61e4b34699 upstream.

Move Telit 0x10c7 composition right after 0x10c6 composition and
before 0x10c8 composition.

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1445,6 +1445,9 @@ static const struct usb_device_id option
 	  .driver_info = NCTRL(4) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c6, 0xff),	/* Telit FE910C04 (MBIM) */
 	  .driver_info = NCTRL(4) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10c7, 0xff, 0xff, 0x30),	/* Telit FE910C04 (ECM) */
+	  .driver_info = NCTRL(4) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10c7, 0xff, 0xff, 0x40) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c8, 0xff),	/* Telit FE910C04 (rmnet) */
 	  .driver_info = RSVD(0) | NCTRL(2) | RSVD(3) | RSVD(4) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c9, 0xff),	/* Telit FE910C04 (MBIM) */
@@ -1455,9 +1458,6 @@ static const struct usb_device_id option
 	  .driver_info = NCTRL(5) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d0, 0xff, 0xff, 0x40) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d0, 0xff, 0xff, 0x60) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10c7, 0xff, 0xff, 0x30),	/* Telit FE910C04 (ECM) */
-	  .driver_info = NCTRL(4) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10c7, 0xff, 0xff, 0x40) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d1, 0xff, 0xff, 0x30),	/* Telit FN990B (MBIM) */
 	  .driver_info = NCTRL(6) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d1, 0xff, 0xff, 0x40) },

[PATCH 6.18 14/29] USB: serial: ftdi_sio: match on interface number for jtag

[Greg Kroah-Hartman]

6.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit 4e31a5d0a9ee672f708fc993c1d5520643f769fd upstream.

Some FTDI devices have the first port reserved for JTAG and have been
using a dedicated quirk to prevent binding to it.

As can be inferred directly or indirectly from the commit messages,
almost all of these devices are dual port devices which means that the
more recently added macro for matching on interface number can be used
instead (and some such devices do so already).

This avoids probing interfaces that will never be bound and cleans up
the match table somewhat.

Note that the JTAG quirk is kept for quad port devices, which would
otherwise require three match entries.

Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/ftdi_sio.c |   72 ++++++++++++++----------------------------
 1 file changed, 24 insertions(+), 48 deletions(-)

--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -628,10 +628,8 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(FTDI_VID, FTDI_IBS_PEDO_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_IBS_PROD_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_TAVIR_STK500_PID) },
-	{ USB_DEVICE(FTDI_VID, FTDI_TIAO_UMPA_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
-	{ USB_DEVICE(FTDI_VID, FTDI_NT_ORIONLXM_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, FTDI_TIAO_UMPA_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, FTDI_NT_ORIONLXM_PID, 1) },
 	{ USB_DEVICE(FTDI_VID, FTDI_NT_ORIONLX_PLUS_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_NT_ORION_IO_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_NT_ORIONMX_PID) },
@@ -842,24 +840,17 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(FTDI_VID, FTDI_ELSTER_UNICOM_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_PROPOX_JTAGCABLEII_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_PROPOX_ISPCABLEIII_PID) },
-	{ USB_DEVICE(FTDI_VID, CYBER_CORTEX_AV_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, CYBER_CORTEX_AV_PID, 1) },
 	{ USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID, 1) },
 	{ USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_OCD_H_PID, 1) },
 	{ USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_TINY_PID, 1) },
 	{ USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_TINY_H_PID, 1) },
-	{ USB_DEVICE(FIC_VID, FIC_NEO1973_DEBUG_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
-	{ USB_DEVICE(FTDI_VID, FTDI_OOCDLINK_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
-	{ USB_DEVICE(FTDI_VID, LMI_LM3S_DEVEL_BOARD_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
-	{ USB_DEVICE(FTDI_VID, LMI_LM3S_EVAL_BOARD_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
-	{ USB_DEVICE(FTDI_VID, LMI_LM3S_ICDI_BOARD_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
-	{ USB_DEVICE(FTDI_VID, FTDI_TURTELIZER_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE_INTERFACE_NUMBER(FIC_VID, FIC_NEO1973_DEBUG_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, FTDI_OOCDLINK_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, LMI_LM3S_DEVEL_BOARD_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, LMI_LM3S_EVAL_BOARD_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, LMI_LM3S_ICDI_BOARD_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, FTDI_TURTELIZER_PID, 1) },
 	{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
 	{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_SCU18) },
 	{ USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
@@ -901,17 +892,14 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(ATMEL_VID, STK541_PID) },
 	{ USB_DEVICE(DE_VID, STB_PID) },
 	{ USB_DEVICE(DE_VID, WHT_PID) },
-	{ USB_DEVICE(ADI_VID, ADI_GNICE_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
-	{ USB_DEVICE(ADI_VID, ADI_GNICEPLUS_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE_INTERFACE_NUMBER(ADI_VID, ADI_GNICE_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(ADI_VID, ADI_GNICEPLUS_PID, 1) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(MICROCHIP_VID, MICROCHIP_USB_BOARD_PID,
 					USB_CLASS_VENDOR_SPEC,
 					USB_SUBCLASS_VENDOR_SPEC, 0x00) },
 	{ USB_DEVICE_INTERFACE_NUMBER(ACTEL_VID, MICROSEMI_ARROW_SF2PLUS_BOARD_PID, 2) },
 	{ USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
-	{ USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE_INTERFACE_NUMBER(MARVELL_VID, MARVELL_SHEEVAPLUG_PID, 1) },
 	{ USB_DEVICE(LARSENBRUSGAARD_VID, LB_ALTITRACK_PID) },
 	{ USB_DEVICE(GN_OTOMETRICS_VID, AURICAL_USB_PID) },
 	{ USB_DEVICE(FTDI_VID, PI_C865_PID) },
@@ -934,10 +922,8 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(PI_VID, PI_1016_PID) },
 	{ USB_DEVICE(KONDO_VID, KONDO_USB_SERIAL_PID) },
 	{ USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) },
-	{ USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
-	{ USB_DEVICE(FTDI_VID, TI_XDS100V2_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, MARVELL_OPENRD_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, TI_XDS100V2_PID, 1) },
 	{ USB_DEVICE(FTDI_VID, HAMEG_HO820_PID) },
 	{ USB_DEVICE(FTDI_VID, HAMEG_HO720_PID) },
 	{ USB_DEVICE(FTDI_VID, HAMEG_HO730_PID) },
@@ -946,18 +932,14 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(FTDI_VID, MJSG_SR_RADIO_PID) },
 	{ USB_DEVICE(FTDI_VID, MJSG_HD_RADIO_PID) },
 	{ USB_DEVICE(FTDI_VID, MJSG_XM_RADIO_PID) },
-	{ USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_ST_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
-	{ USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SLITE_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
-	{ USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH2_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, XVERVE_SIGNALYZER_ST_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, XVERVE_SIGNALYZER_SLITE_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, XVERVE_SIGNALYZER_SH2_PID, 1) },
 	{ USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH4_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(FTDI_VID, SEGWAY_RMP200_PID) },
 	{ USB_DEVICE(FTDI_VID, ACCESIO_COM4SM_PID) },
-	{ USB_DEVICE(IONICS_VID, IONICS_PLUGCOMPUTER_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE_INTERFACE_NUMBER(IONICS_VID, IONICS_PLUGCOMPUTER_PID, 1) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_24_MASTER_WING_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_PC_WING_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_USB_DMX_PID) },
@@ -972,15 +954,12 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(FTDI_VID, FTDI_CINTERION_MC55I_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_FHE_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_DOTEC_PID) },
-	{ USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
-	{ USB_DEVICE(ST_VID, ST_STMCLT_2232_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE_INTERFACE_NUMBER(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(ST_VID, ST_STMCLT_2232_PID, 1) },
 	{ USB_DEVICE(ST_VID, ST_STMCLT_4232_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_stmclite_quirk },
 	{ USB_DEVICE(FTDI_VID, FTDI_RF_R106) },
-	{ USB_DEVICE(FTDI_VID, FTDI_DISTORTEC_JTAG_LOCK_PICK_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, FTDI_DISTORTEC_JTAG_LOCK_PICK_PID, 1) },
 	{ USB_DEVICE(FTDI_VID, FTDI_LUMEL_PD12_PID) },
 	/* Crucible Devices */
 	{ USB_DEVICE(FTDI_VID, FTDI_CT_COMET_PID) },
@@ -1055,8 +1034,7 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(ICPDAS_VID, ICPDAS_I7561U_PID) },
 	{ USB_DEVICE(ICPDAS_VID, ICPDAS_I7563U_PID) },
 	{ USB_DEVICE(WICED_VID, WICED_USB20706V2_PID) },
-	{ USB_DEVICE(TI_VID, TI_CC3200_LAUNCHPAD_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE_INTERFACE_NUMBER(TI_VID, TI_CC3200_LAUNCHPAD_PID, 1) },
 	{ USB_DEVICE(CYPRESS_VID, CYPRESS_WICED_BT_USB_PID) },
 	{ USB_DEVICE(CYPRESS_VID, CYPRESS_WICED_WL_USB_PID) },
 	{ USB_DEVICE(AIRBUS_DS_VID, AIRBUS_DS_P8GR) },
@@ -1076,10 +1054,8 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ODIN_PID) },
 	{ USB_DEVICE_INTERFACE_NUMBER(UBLOX_VID, UBLOX_EVK_M101_PID, 2) },
 	/* FreeCalypso USB adapters */
-	{ USB_DEVICE(FTDI_VID, FTDI_FALCONIA_JTAG_BUF_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
-	{ USB_DEVICE(FTDI_VID, FTDI_FALCONIA_JTAG_UNBUF_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, FTDI_FALCONIA_JTAG_BUF_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, FTDI_FALCONIA_JTAG_UNBUF_PID, 1) },
 	/* GMC devices */
 	{ USB_DEVICE(GMC_VID, GMC_Z216C_PID) },
 	/* Altera USB Blaster 3 */

[PATCH 6.18 15/29] serial: add support of CPCI cards

[Greg Kroah-Hartman]

6.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Magne Bruno <magne.bruno@addi-data.com>

commit 0e5a99e0e5f50353b86939ff6e424800d769c818 upstream.

Addi-Data GmbH is manufacturing multi-serial ports cards supporting CompactPCI (known as CPCI).
Those cards are identified with different DeviceIds. Those cards integrating standard UARTs
work the same way as PCI/PCIe models already supported in the serial driver.

Signed-off-by: Magne Bruno <magne.bruno@addi-data.com>
Link: https://patch.msgid.link/20251110162456.341029-1-magne.bruno@addi-data.com
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/8250/8250_pci.c |   37 +++++++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -95,6 +95,11 @@
 #define PCI_DEVICE_ID_MOXA_CP138E_A	0x1381
 #define PCI_DEVICE_ID_MOXA_CP168EL_A	0x1683
 
+#define PCI_DEVICE_ID_ADDIDATA_CPCI7500        0x7003
+#define PCI_DEVICE_ID_ADDIDATA_CPCI7500_NG     0x7024
+#define PCI_DEVICE_ID_ADDIDATA_CPCI7420_NG     0x7025
+#define PCI_DEVICE_ID_ADDIDATA_CPCI7300_NG     0x7026
+
 /* Unknown vendors/cards - this should not be in linux/pci_ids.h */
 #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584	0x1584
 #define PCI_SUBDEVICE_ID_UNKNOWN_0x1588	0x1588
@@ -5996,6 +6001,38 @@ static const struct pci_device_id serial
 		0,
 		pbn_ADDIDATA_PCIe_8_3906250 },
 
+	{	PCI_VENDOR_ID_ADDIDATA,
+		PCI_DEVICE_ID_ADDIDATA_CPCI7500,
+		PCI_ANY_ID,
+		PCI_ANY_ID,
+		0,
+		0,
+		pbn_b0_4_115200 },
+
+	{	PCI_VENDOR_ID_ADDIDATA,
+		PCI_DEVICE_ID_ADDIDATA_CPCI7500_NG,
+		PCI_ANY_ID,
+		PCI_ANY_ID,
+		0,
+		0,
+		pbn_b0_4_115200 },
+
+	{	PCI_VENDOR_ID_ADDIDATA,
+		PCI_DEVICE_ID_ADDIDATA_CPCI7420_NG,
+		PCI_ANY_ID,
+		PCI_ANY_ID,
+		0,
+		0,
+		pbn_b0_2_115200 },
+
+	{	PCI_VENDOR_ID_ADDIDATA,
+		PCI_DEVICE_ID_ADDIDATA_CPCI7300_NG,
+		PCI_ANY_ID,
+		PCI_ANY_ID,
+		0,
+		0,
+		pbn_b0_1_115200 },
+
 	{	PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835,
 		PCI_VENDOR_ID_IBM, 0x0299,
 		0, 0, pbn_b0_bt_2_115200 },

[PATCH 6.18 16/29] dt-bindings: serial: rsci: Drop "uart-has-rtscts: false"

[Greg Kroah-Hartman]

6.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Biju Das <biju.das.jz@bp.renesas.com>

commit a6cdfd69ad38997108b862f9aafc547891506701 upstream.

Drop "uart-has-rtscts: false" from binding as the IP supports hardware
flow control on all SoCs.

Cc: stable@kernel.org
Fixes: 25422e8f46c1 ("dt-bindings: serial: Add compatible for Renesas RZ/T2H SoC in sci")
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20251114101350.106699-2-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Documentation/devicetree/bindings/serial/renesas,rsci.yaml |    2 --
 1 file changed, 2 deletions(-)

--- a/Documentation/devicetree/bindings/serial/renesas,rsci.yaml
+++ b/Documentation/devicetree/bindings/serial/renesas,rsci.yaml
@@ -54,8 +54,6 @@ properties:
   power-domains:
     maxItems: 1
 
-  uart-has-rtscts: false
-
 required:
   - compatible
   - reg

[PATCH 6.18 17/29] serial: sh-sci: Fix deadlock during RSCI FIFO overrun error

[Greg Kroah-Hartman]

6.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Biju Das <biju.das.jz@bp.renesas.com>

commit 75a9f4c54770f062f4b3813a83667452b326dda3 upstream.

On RSCI IP, a deadlock occurs during a FIFO overrun error, as it uses a
different register to clear the FIFO overrun error status.

Cc: stable@kernel.org
Fixes: 0666e3fe95ab ("serial: sh-sci: Add support for RZ/T2H SCI")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251114101350.106699-3-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/sh-sci.c |   12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -1024,8 +1024,16 @@ static int sci_handle_fifo_overrun(struc
 
 	status = s->ops->read_reg(port, s->params->overrun_reg);
 	if (status & s->params->overrun_mask) {
-		status &= ~s->params->overrun_mask;
-		s->ops->write_reg(port, s->params->overrun_reg, status);
+		if (s->type == SCI_PORT_RSCI) {
+			/*
+			 * All of the CFCLR_*C clearing bits match the corresponding
+			 * CSR_*status bits. So, reuse the overrun mask for clearing.
+			 */
+			s->ops->clear_SCxSR(port, s->params->overrun_mask);
+		} else {
+			status &= ~s->params->overrun_mask;
+			s->ops->write_reg(port, s->params->overrun_reg, status);
+		}
 
 		port->icount.overrun++;
 

[PATCH 6.18 18/29] USB: serial: belkin_sa: fix TIOCMBIS and TIOCMBIC

[Greg Kroah-Hartman]

6.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit b6e0b3016187446ddef9edac03cd9d544ac63f11 upstream.

Asserting or deasserting a modem control line using TIOCMBIS or TIOCMBIC
should not deassert any lines that are not in the mask.

Fix this long-standing regression dating back to 2003 when the
tiocmset() callback was introduced.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/belkin_sa.c |   28 +++++++++++++++++-----------
 1 file changed, 17 insertions(+), 11 deletions(-)

--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -435,7 +435,7 @@ static int belkin_sa_tiocmset(struct tty
 	struct belkin_sa_private *priv = usb_get_serial_port_data(port);
 	unsigned long control_state;
 	unsigned long flags;
-	int retval;
+	int retval = 0;
 	int rts = 0;
 	int dtr = 0;
 
@@ -452,26 +452,32 @@ static int belkin_sa_tiocmset(struct tty
 	}
 	if (clear & TIOCM_RTS) {
 		control_state &= ~TIOCM_RTS;
-		rts = 0;
+		rts = 1;
 	}
 	if (clear & TIOCM_DTR) {
 		control_state &= ~TIOCM_DTR;
-		dtr = 0;
+		dtr = 1;
 	}
 
 	priv->control_state = control_state;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	retval = BSA_USB_CMD(BELKIN_SA_SET_RTS_REQUEST, rts);
-	if (retval < 0) {
-		dev_err(&port->dev, "Set RTS error %d\n", retval);
-		goto exit;
+	if (rts) {
+		retval = BSA_USB_CMD(BELKIN_SA_SET_RTS_REQUEST,
+					!!(control_state & TIOCM_RTS));
+		if (retval < 0) {
+			dev_err(&port->dev, "Set RTS error %d\n", retval);
+			goto exit;
+		}
 	}
 
-	retval = BSA_USB_CMD(BELKIN_SA_SET_DTR_REQUEST, dtr);
-	if (retval < 0) {
-		dev_err(&port->dev, "Set DTR error %d\n", retval);
-		goto exit;
+	if (dtr) {
+		retval = BSA_USB_CMD(BELKIN_SA_SET_DTR_REQUEST,
+					!!(control_state & TIOCM_DTR));
+		if (retval < 0) {
+			dev_err(&port->dev, "Set DTR error %d\n", retval);
+			goto exit;
+		}
 	}
 exit:
 	return retval;

[PATCH 6.18 19/29] USB: serial: kobil_sct: fix TIOCMBIS and TIOCMBIC

[Greg Kroah-Hartman]

6.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit d432df758f92c4c28aac409bc807fd1716167577 upstream.

Asserting or deasserting a modem control line using TIOCMBIS or TIOCMBIC
should not deassert any lines that are not in the mask.

Fix this long-standing issue dating back to 2003 when the support for
these ioctls was added with the introduction of the tiocmset() callback.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/kobil_sct.c |   18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -418,7 +418,7 @@ static int kobil_tiocmset(struct tty_str
 	struct usb_serial_port *port = tty->driver_data;
 	struct device *dev = &port->dev;
 	struct kobil_private *priv;
-	int result;
+	int result = 0;
 	int dtr = 0;
 	int rts = 0;
 
@@ -435,12 +435,12 @@ static int kobil_tiocmset(struct tty_str
 	if (set & TIOCM_DTR)
 		dtr = 1;
 	if (clear & TIOCM_RTS)
-		rts = 0;
+		rts = 1;
 	if (clear & TIOCM_DTR)
-		dtr = 0;
+		dtr = 1;
 
-	if (priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID) {
-		if (dtr != 0)
+	if (dtr && priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID) {
+		if (set & TIOCM_DTR)
 			dev_dbg(dev, "%s - Setting DTR\n", __func__);
 		else
 			dev_dbg(dev, "%s - Clearing DTR\n", __func__);
@@ -448,13 +448,13 @@ static int kobil_tiocmset(struct tty_str
 			  usb_sndctrlpipe(port->serial->dev, 0),
 			  SUSBCRequest_SetStatusLinesOrQueues,
 			  USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT,
-			  ((dtr != 0) ? SUSBCR_SSL_SETDTR : SUSBCR_SSL_CLRDTR),
+			  ((set & TIOCM_DTR) ? SUSBCR_SSL_SETDTR : SUSBCR_SSL_CLRDTR),
 			  0,
 			  NULL,
 			  0,
 			  KOBIL_TIMEOUT);
-	} else {
-		if (rts != 0)
+	} else if (rts) {
+		if (set & TIOCM_RTS)
 			dev_dbg(dev, "%s - Setting RTS\n", __func__);
 		else
 			dev_dbg(dev, "%s - Clearing RTS\n", __func__);
@@ -462,7 +462,7 @@ static int kobil_tiocmset(struct tty_str
 			usb_sndctrlpipe(port->serial->dev, 0),
 			SUSBCRequest_SetStatusLinesOrQueues,
 			USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT,
-			((rts != 0) ? SUSBCR_SSL_SETRTS : SUSBCR_SSL_CLRRTS),
+			((set & TIOCM_RTS) ? SUSBCR_SSL_SETRTS : SUSBCR_SSL_CLRRTS),
 			0,
 			NULL,
 			0,

[PATCH 6.18 20/29] Documentation/rtla: rename common_xxx.rst files to common_xxx.txt

[Greg Kroah-Hartman]

6.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gopi Krishna Menon <krishnagopi487@gmail.com>

commit 96b546c241b11a97ba1247580208c554458e7866 upstream.

Sphinx reports htmldocs errors:

Documentation/tools/rtla/common_options.rst:58: ERROR: Undefined substitution referenced: "threshold".
Documentation/tools/rtla/common_options.rst:88: ERROR: Undefined substitution referenced: "tool".
Documentation/tools/rtla/common_options.rst:88: ERROR: Undefined substitution referenced: "thresharg".
Documentation/tools/rtla/common_options.rst:88: ERROR: Undefined substitution referenced: "tracer".
Documentation/tools/rtla/common_options.rst:92: ERROR: Undefined substitution referenced: "tracer".
Documentation/tools/rtla/common_options.rst:98: ERROR: Undefined substitution referenced: "actionsperf".
Documentation/tools/rtla/common_options.rst:113: ERROR: Undefined substitution referenced: "tool".

common_*.rst files are snippets that are intended to be included by rtla
docs (rtla*.rst). common_options.rst in particular contains
substitutions which depend on other common_* includes, so building it
independently as reST source results in above errors.

Rename all common_*.rst files to common_*.txt to prevent Sphinx from
building these snippets as standalone reST source and update all include
references accordingly.

Link: https://www.sphinx-doc.org/en/master/usage/restructuredtext/basics.html#substitutions
Suggested-by: Tomas Glozar <tglozar@redhat.com>
Suggested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Gopi Krishna Menon <krishnagopi487@gmail.com>
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Fixes: 05b7e10687c6 ("tools/rtla: Add remaining support for osnoise actions")
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20251008184522.13201-1-krishnagopi487@gmail.com
[Bagas: massage commit message and apply trailers]
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251013092719.30780-2-bagasdotme@gmail.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 .../{common_appendix.rst => common_appendix.txt}     |  0
 ...mmon_hist_options.rst => common_hist_options.txt} |  0
 .../rtla/{common_options.rst => common_options.txt}  |  0
 ...escription.rst => common_osnoise_description.txt} |  0
 ...snoise_options.rst => common_osnoise_options.txt} |  0
 ...common_timerlat_aa.rst => common_timerlat_aa.txt} |  0
 ...scription.rst => common_timerlat_description.txt} |  0
 ...erlat_options.rst => common_timerlat_options.txt} |  0
 ...common_top_options.rst => common_top_options.txt} |  0
 Documentation/tools/rtla/common_appendix.rst             |   24 ---
 Documentation/tools/rtla/common_appendix.txt             |   24 +++
 Documentation/tools/rtla/common_hist_options.rst         |   23 --
 Documentation/tools/rtla/common_hist_options.txt         |   23 ++
 Documentation/tools/rtla/common_options.rst              |  119 ---------------
 Documentation/tools/rtla/common_options.txt              |  119 +++++++++++++++
 Documentation/tools/rtla/common_osnoise_description.rst  |    8 -
 Documentation/tools/rtla/common_osnoise_description.txt  |    8 +
 Documentation/tools/rtla/common_osnoise_options.rst      |   39 ----
 Documentation/tools/rtla/common_osnoise_options.txt      |   39 ++++
 Documentation/tools/rtla/common_timerlat_aa.rst          |    7 
 Documentation/tools/rtla/common_timerlat_aa.txt          |    7 
 Documentation/tools/rtla/common_timerlat_description.rst |   18 --
 Documentation/tools/rtla/common_timerlat_description.txt |   18 ++
 Documentation/tools/rtla/common_timerlat_options.rst     |   67 --------
 Documentation/tools/rtla/common_timerlat_options.txt     |   67 ++++++++
 Documentation/tools/rtla/common_top_options.rst          |    3 
 Documentation/tools/rtla/common_top_options.txt          |    3 
 Documentation/tools/rtla/rtla-hwnoise.rst                |    8 -
 Documentation/tools/rtla/rtla-osnoise-hist.rst           |   10 -
 Documentation/tools/rtla/rtla-osnoise-top.rst            |   10 -
 Documentation/tools/rtla/rtla-osnoise.rst                |    4 
 Documentation/tools/rtla/rtla-timerlat-hist.rst          |   12 -
 Documentation/tools/rtla/rtla-timerlat-top.rst           |   12 -
 Documentation/tools/rtla/rtla-timerlat.rst               |    4 
 Documentation/tools/rtla/rtla.rst                        |    2 
 26 files changed, 339 insertions(+), 339 deletions(-)
 rename Documentation/tools/rtla/{common_appendix.rst => common_appendix.txt} (100%)
 rename Documentation/tools/rtla/{common_hist_options.rst => common_hist_options.txt} (100%)
 rename Documentation/tools/rtla/{common_options.rst => common_options.txt} (100%)
 rename Documentation/tools/rtla/{common_osnoise_description.rst => common_osnoise_description.txt} (100%)
 rename Documentation/tools/rtla/{common_osnoise_options.rst => common_osnoise_options.txt} (100%)
 rename Documentation/tools/rtla/{common_timerlat_aa.rst => common_timerlat_aa.txt} (100%)
 rename Documentation/tools/rtla/{common_timerlat_description.rst => common_timerlat_description.txt} (100%)
 rename Documentation/tools/rtla/{common_timerlat_options.rst => common_timerlat_options.txt} (100%)
 rename Documentation/tools/rtla/{common_top_options.rst => common_top_options.txt} (100%)

--- a/Documentation/tools/rtla/common_appendix.rst
+++ /dev/null
@@ -1,24 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-EXIT STATUS
-===========
-
-::
-
- 0  Passed: the test did not hit the stop tracing condition
- 1  Error: invalid argument
- 2  Failed: the test hit the stop tracing condition
-
-REPORTING BUGS
-==============
-Report bugs to <linux-kernel@vger.kernel.org>
-and <linux-trace-devel@vger.kernel.org>
-
-LICENSE
-=======
-**rtla** is Free Software licensed under the GNU GPLv2
-
-COPYING
-=======
-Copyright \(C) 2021 Red Hat, Inc. Free use of this software is granted under
-the terms of the GNU Public License (GPL).
--- /dev/null
+++ b/Documentation/tools/rtla/common_appendix.txt
@@ -0,0 +1,24 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+EXIT STATUS
+===========
+
+::
+
+ 0  Passed: the test did not hit the stop tracing condition
+ 1  Error: invalid argument
+ 2  Failed: the test hit the stop tracing condition
+
+REPORTING BUGS
+==============
+Report bugs to <linux-kernel@vger.kernel.org>
+and <linux-trace-devel@vger.kernel.org>
+
+LICENSE
+=======
+**rtla** is Free Software licensed under the GNU GPLv2
+
+COPYING
+=======
+Copyright \(C) 2021 Red Hat, Inc. Free use of this software is granted under
+the terms of the GNU Public License (GPL).
--- a/Documentation/tools/rtla/common_hist_options.rst
+++ /dev/null
@@ -1,23 +0,0 @@
-**-b**, **--bucket-size** *N*
-
-        Set the histogram bucket size (default *1*).
-
-**-E**, **--entries** *N*
-
-        Set the number of entries of the histogram (default 256).
-
-**--no-header**
-
-        Do not print header.
-
-**--no-summary**
-
-        Do not print summary.
-
-**--no-index**
-
-        Do not print index.
-
-**--with-zeros**
-
-        Print zero only entries.
--- /dev/null
+++ b/Documentation/tools/rtla/common_hist_options.txt
@@ -0,0 +1,23 @@
+**-b**, **--bucket-size** *N*
+
+        Set the histogram bucket size (default *1*).
+
+**-E**, **--entries** *N*
+
+        Set the number of entries of the histogram (default 256).
+
+**--no-header**
+
+        Do not print header.
+
+**--no-summary**
+
+        Do not print summary.
+
+**--no-index**
+
+        Do not print index.
+
+**--with-zeros**
+
+        Print zero only entries.
--- a/Documentation/tools/rtla/common_options.rst
+++ /dev/null
@@ -1,119 +0,0 @@
-**-c**, **--cpus** *cpu-list*
-
-        Set the osnoise tracer to run the sample threads in the cpu-list.
-
-**-H**, **--house-keeping** *cpu-list*
-
-        Run rtla control threads only on the given cpu-list.
-
-**-d**, **--duration** *time[s|m|h|d]*
-
-        Set the duration of the session.
-
-**-D**, **--debug**
-
-        Print debug info.
-
-**-e**, **--event** *sys:event*
-
-        Enable an event in the trace (**-t**) session. The argument can be a specific event, e.g., **-e** *sched:sched_switch*, or all events of a system group, e.g., **-e** *sched*. Multiple **-e** are allowed. It is only active when **-t** or **-a** are set.
-
-**--filter** *<filter>*
-
-        Filter the previous **-e** *sys:event* event with *<filter>*. For further information about event filtering see https://www.kernel.org/doc/html/latest/trace/events.html#event-filtering.
-
-**--trigger** *<trigger>*
-        Enable a trace event trigger to the previous **-e** *sys:event*.
-        If the *hist:* trigger is activated, the output histogram will be automatically saved to a file named *system_event_hist.txt*.
-        For example, the command:
-
-        rtla <command> <mode> -t -e osnoise:irq_noise --trigger="hist:key=desc,duration/1000:sort=desc,duration/1000:vals=hitcount"
-
-        Will automatically save the content of the histogram associated to *osnoise:irq_noise* event in *osnoise_irq_noise_hist.txt*.
-
-        For further information about event trigger see https://www.kernel.org/doc/html/latest/trace/events.html#event-triggers.
-
-**-P**, **--priority** *o:prio|r:prio|f:prio|d:runtime:period*
-
-        Set scheduling parameters to the osnoise tracer threads, the format to set the priority are:
-
-        - *o:prio* - use SCHED_OTHER with *prio*;
-        - *r:prio* - use SCHED_RR with *prio*;
-        - *f:prio* - use SCHED_FIFO with *prio*;
-        - *d:runtime[us|ms|s]:period[us|ms|s]* - use SCHED_DEADLINE with *runtime* and *period* in nanoseconds.
-
-**-C**, **--cgroup**\[*=cgroup*]
-
-        Set a *cgroup* to the tracer's threads. If the **-C** option is passed without arguments, the tracer's thread will inherit **rtla**'s *cgroup*. Otherwise, the threads will be placed on the *cgroup* passed to the option.
-
-**--warm-up** *s*
-
-        After starting the workload, let it run for *s* seconds before starting collecting the data, allowing the system to warm-up. Statistical data generated during warm-up is discarded.
-
-**--trace-buffer-size** *kB*
-        Set the per-cpu trace buffer size in kB for the tracing output.
-
-**--on-threshold** *action*
-
-        Defines an action to be executed when tracing is stopped on a latency threshold
-        specified by |threshold|.
-
-        Multiple --on-threshold actions may be specified, and they will be executed in
-        the order they are provided. If any action fails, subsequent actions in the list
-        will not be executed.
-
-        Supported actions are:
-
-        - *trace[,file=<filename>]*
-
-          Saves trace output, optionally taking a filename. Alternative to -t/--trace.
-          Note that nlike -t/--trace, specifying this multiple times will result in
-          the trace being saved multiple times.
-
-        - *signal,num=<sig>,pid=<pid>*
-
-          Sends signal to process. "parent" might be specified in place of pid to target
-          the parent process of rtla.
-
-        - *shell,command=<command>*
-
-          Execute shell command.
-
-        - *continue*
-
-          Continue tracing after actions are executed instead of stopping.
-
-        Example:
-
-        $ rtla |tool| |thresharg| 20 --on-threshold trace
-        --on-threshold shell,command="grep ipi_send |tracer|\_trace.txt"
-        --on-threshold signal,num=2,pid=parent
-
-        This will save a trace with the default filename "|tracer|\_trace.txt", print its
-        lines that contain the text "ipi_send" on standard output, and send signal 2
-        (SIGINT) to the parent process.
-
-        Performance Considerations:
-
-        |actionsperf|
-
-**--on-end** *action*
-
-        Defines an action to be executed at the end of tracing.
-
-        Multiple --on-end actions can be specified, and they will be executed in the order
-        they are provided. If any action fails, subsequent actions in the list will not be
-        executed.
-
-        See the documentation for **--on-threshold** for the list of supported actions, with
-        the exception that *continue* has no effect.
-
-        Example:
-
-        $ rtla |tool| -d 5s --on-end trace
-
-        This runs rtla with the default options, and saves trace output at the end.
-
-**-h**, **--help**
-
-        Print help menu.
--- /dev/null
+++ b/Documentation/tools/rtla/common_options.txt
@@ -0,0 +1,119 @@
+**-c**, **--cpus** *cpu-list*
+
+        Set the osnoise tracer to run the sample threads in the cpu-list.
+
+**-H**, **--house-keeping** *cpu-list*
+
+        Run rtla control threads only on the given cpu-list.
+
+**-d**, **--duration** *time[s|m|h|d]*
+
+        Set the duration of the session.
+
+**-D**, **--debug**
+
+        Print debug info.
+
+**-e**, **--event** *sys:event*
+
+        Enable an event in the trace (**-t**) session. The argument can be a specific event, e.g., **-e** *sched:sched_switch*, or all events of a system group, e.g., **-e** *sched*. Multiple **-e** are allowed. It is only active when **-t** or **-a** are set.
+
+**--filter** *<filter>*
+
+        Filter the previous **-e** *sys:event* event with *<filter>*. For further information about event filtering see https://www.kernel.org/doc/html/latest/trace/events.html#event-filtering.
+
+**--trigger** *<trigger>*
+        Enable a trace event trigger to the previous **-e** *sys:event*.
+        If the *hist:* trigger is activated, the output histogram will be automatically saved to a file named *system_event_hist.txt*.
+        For example, the command:
+
+        rtla <command> <mode> -t -e osnoise:irq_noise --trigger="hist:key=desc,duration/1000:sort=desc,duration/1000:vals=hitcount"
+
+        Will automatically save the content of the histogram associated to *osnoise:irq_noise* event in *osnoise_irq_noise_hist.txt*.
+
+        For further information about event trigger see https://www.kernel.org/doc/html/latest/trace/events.html#event-triggers.
+
+**-P**, **--priority** *o:prio|r:prio|f:prio|d:runtime:period*
+
+        Set scheduling parameters to the osnoise tracer threads, the format to set the priority are:
+
+        - *o:prio* - use SCHED_OTHER with *prio*;
+        - *r:prio* - use SCHED_RR with *prio*;
+        - *f:prio* - use SCHED_FIFO with *prio*;
+        - *d:runtime[us|ms|s]:period[us|ms|s]* - use SCHED_DEADLINE with *runtime* and *period* in nanoseconds.
+
+**-C**, **--cgroup**\[*=cgroup*]
+
+        Set a *cgroup* to the tracer's threads. If the **-C** option is passed without arguments, the tracer's thread will inherit **rtla**'s *cgroup*. Otherwise, the threads will be placed on the *cgroup* passed to the option.
+
+**--warm-up** *s*
+
+        After starting the workload, let it run for *s* seconds before starting collecting the data, allowing the system to warm-up. Statistical data generated during warm-up is discarded.
+
+**--trace-buffer-size** *kB*
+        Set the per-cpu trace buffer size in kB for the tracing output.
+
+**--on-threshold** *action*
+
+        Defines an action to be executed when tracing is stopped on a latency threshold
+        specified by |threshold|.
+
+        Multiple --on-threshold actions may be specified, and they will be executed in
+        the order they are provided. If any action fails, subsequent actions in the list
+        will not be executed.
+
+        Supported actions are:
+
+        - *trace[,file=<filename>]*
+
+          Saves trace output, optionally taking a filename. Alternative to -t/--trace.
+          Note that nlike -t/--trace, specifying this multiple times will result in
+          the trace being saved multiple times.
+
+        - *signal,num=<sig>,pid=<pid>*
+
+          Sends signal to process. "parent" might be specified in place of pid to target
+          the parent process of rtla.
+
+        - *shell,command=<command>*
+
+          Execute shell command.
+
+        - *continue*
+
+          Continue tracing after actions are executed instead of stopping.
+
+        Example:
+
+        $ rtla |tool| |thresharg| 20 --on-threshold trace
+        --on-threshold shell,command="grep ipi_send |tracer|\_trace.txt"
+        --on-threshold signal,num=2,pid=parent
+
+        This will save a trace with the default filename "|tracer|\_trace.txt", print its
+        lines that contain the text "ipi_send" on standard output, and send signal 2
+        (SIGINT) to the parent process.
+
+        Performance Considerations:
+
+        |actionsperf|
+
+**--on-end** *action*
+
+        Defines an action to be executed at the end of tracing.
+
+        Multiple --on-end actions can be specified, and they will be executed in the order
+        they are provided. If any action fails, subsequent actions in the list will not be
+        executed.
+
+        See the documentation for **--on-threshold** for the list of supported actions, with
+        the exception that *continue* has no effect.
+
+        Example:
+
+        $ rtla |tool| -d 5s --on-end trace
+
+        This runs rtla with the default options, and saves trace output at the end.
+
+**-h**, **--help**
+
+        Print help menu.
--- a/Documentation/tools/rtla/common_osnoise_description.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-The **rtla osnoise** tool is an interface for the *osnoise* tracer. The
-*osnoise* tracer dispatches a kernel thread per-cpu. These threads read the
-time in a loop while with preemption, softirq and IRQs enabled, thus
-allowing all the sources of operating system noise during its execution.
-The *osnoise*'s tracer threads take note of the delta between each time
-read, along with an interference counter of all sources of interference.
-At the end of each period, the *osnoise* tracer displays a summary of
-the results.
--- /dev/null
+++ b/Documentation/tools/rtla/common_osnoise_description.txt
@@ -0,0 +1,8 @@
+The **rtla osnoise** tool is an interface for the *osnoise* tracer. The
+*osnoise* tracer dispatches a kernel thread per-cpu. These threads read the
+time in a loop while with preemption, softirq and IRQs enabled, thus
+allowing all the sources of operating system noise during its execution.
+The *osnoise*'s tracer threads take note of the delta between each time
+read, along with an interference counter of all sources of interference.
+At the end of each period, the *osnoise* tracer displays a summary of
+the results.
--- a/Documentation/tools/rtla/common_osnoise_options.rst
+++ /dev/null
@@ -1,39 +0,0 @@
-.. |threshold|  replace:: **-a/--auto**, **-s/--stop**, or **-S/--stop-total**
-.. |thresharg|  replace:: -s
-.. |tracer|     replace:: osnoise
-
-.. |actionsperf| replace::
-        Due to implementational limitations, actions might be delayed
-        up to one second after tracing is stopped.
-
-**-a**, **--auto** *us*
-
-        Set the automatic trace mode. This mode sets some commonly used options
-        while debugging the system. It is equivalent to use **-s** *us* **-T 1 -t**.
-
-**-p**, **--period** *us*
-
-        Set the *osnoise* tracer period in microseconds.
-
-**-r**, **--runtime** *us*
-
-        Set the *osnoise* tracer runtime in microseconds.
-
-**-s**, **--stop** *us*
-
-        Stop the trace if a single sample is higher than the argument in microseconds.
-        If **-T** is set, it will also save the trace to the output.
-
-**-S**, **--stop-total** *us*
-
-        Stop the trace if the total sample is higher than the argument in microseconds.
-        If **-T** is set, it will also save the trace to the output.
-
-**-T**, **--threshold** *us*
-
-        Specify the minimum delta between two time reads to be considered noise.
-        The default threshold is *5 us*.
-
-**-t**, **--trace** \[*file*]
-
-        Save the stopped trace to [*file|osnoise_trace.txt*].
--- /dev/null
+++ b/Documentation/tools/rtla/common_osnoise_options.txt
@@ -0,0 +1,39 @@
+.. |threshold|  replace:: **-a/--auto**, **-s/--stop**, or **-S/--stop-total**
+.. |thresharg|  replace:: -s
+.. |tracer|     replace:: osnoise
+
+.. |actionsperf| replace::
+        Due to implementational limitations, actions might be delayed
+        up to one second after tracing is stopped.
+
+**-a**, **--auto** *us*
+
+        Set the automatic trace mode. This mode sets some commonly used options
+        while debugging the system. It is equivalent to use **-s** *us* **-T 1 -t**.
+
+**-p**, **--period** *us*
+
+        Set the *osnoise* tracer period in microseconds.
+
+**-r**, **--runtime** *us*
+
+        Set the *osnoise* tracer runtime in microseconds.
+
+**-s**, **--stop** *us*
+
+        Stop the trace if a single sample is higher than the argument in microseconds.
+        If **-T** is set, it will also save the trace to the output.
+
+**-S**, **--stop-total** *us*
+
+        Stop the trace if the total sample is higher than the argument in microseconds.
+        If **-T** is set, it will also save the trace to the output.
+
+**-T**, **--threshold** *us*
+
+        Specify the minimum delta between two time reads to be considered noise.
+        The default threshold is *5 us*.
+
+**-t**, **--trace** \[*file*]
+
+        Save the stopped trace to [*file|osnoise_trace.txt*].
--- a/Documentation/tools/rtla/common_timerlat_aa.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-**--dump-tasks**
-
-        prints the task running on all CPUs if stop conditions are met (depends on !--no-aa)
-
-**--no-aa**
-
-        disable auto-analysis, reducing rtla timerlat cpu usage
--- /dev/null
+++ b/Documentation/tools/rtla/common_timerlat_aa.txt
@@ -0,0 +1,7 @@
+**--dump-tasks**
+
+        prints the task running on all CPUs if stop conditions are met (depends on !--no-aa)
+
+**--no-aa**
+
+        disable auto-analysis, reducing rtla timerlat cpu usage
--- a/Documentation/tools/rtla/common_timerlat_description.rst
+++ /dev/null
@@ -1,18 +0,0 @@
-The **rtla timerlat** tool is an interface for the *timerlat* tracer. The
-*timerlat* tracer dispatches a kernel thread per-cpu. These threads
-set a periodic timer to wake themselves up and go back to sleep. After
-the wakeup, they collect and generate useful information for the
-debugging of operating system timer latency.
-
-The *timerlat* tracer outputs information in two ways. It periodically
-prints the timer latency at the timer *IRQ* handler and the *Thread*
-handler. It also enables the trace of the most relevant information via
-**osnoise:** tracepoints.
-
-The **rtla timerlat** tool sets the options of the *timerlat* tracer
-and collects and displays a summary of the results. By default,
-the collection is done synchronously in kernel space using a dedicated
-BPF program attached to the *timerlat* tracer. If either BPF or
-the **osnoise:timerlat_sample** tracepoint it attaches to is
-unavailable, the **rtla timerlat** tool falls back to using tracefs to
-process the data asynchronously in user space.
--- /dev/null
+++ b/Documentation/tools/rtla/common_timerlat_description.txt
@@ -0,0 +1,18 @@
+The **rtla timerlat** tool is an interface for the *timerlat* tracer. The
+*timerlat* tracer dispatches a kernel thread per-cpu. These threads
+set a periodic timer to wake themselves up and go back to sleep. After
+the wakeup, they collect and generate useful information for the
+debugging of operating system timer latency.
+
+The *timerlat* tracer outputs information in two ways. It periodically
+prints the timer latency at the timer *IRQ* handler and the *Thread*
+handler. It also enables the trace of the most relevant information via
+**osnoise:** tracepoints.
+
+The **rtla timerlat** tool sets the options of the *timerlat* tracer
+and collects and displays a summary of the results. By default,
+the collection is done synchronously in kernel space using a dedicated
+BPF program attached to the *timerlat* tracer. If either BPF or
+the **osnoise:timerlat_sample** tracepoint it attaches to is
+unavailable, the **rtla timerlat** tool falls back to using tracefs to
+process the data asynchronously in user space.
--- a/Documentation/tools/rtla/common_timerlat_options.rst
+++ /dev/null
@@ -1,67 +0,0 @@
-.. |threshold|  replace:: **-a/--auto**, **-i/--irq**, or **-T/--thread**
-.. |thresharg|  replace:: -T
-.. |tracer|     replace:: timerlat
-
-.. |actionsperf| replace::
-        For time-sensitive actions, it is recommended to run **rtla timerlat** with BPF
-        support and RT priority. Note that due to implementational limitations, actions
-        might be delayed up to one second after tracing is stopped if BPF mode is not
-        available or disabled.
-
-**-a**, **--auto** *us*
-
-        Set the automatic trace mode. This mode sets some commonly used options
-        while debugging the system. It is equivalent to use **-T** *us* **-s** *us*
-        **-t**. By default, *timerlat* tracer uses FIFO:95 for *timerlat* threads,
-        thus equilavent to **-P** *f:95*.
-
-**-p**, **--period** *us*
-
-        Set the *timerlat* tracer period in microseconds.
-
-**-i**, **--irq** *us*
-
-        Stop trace if the *IRQ* latency is higher than the argument in us.
-
-**-T**, **--thread** *us*
-
-        Stop trace if the *Thread* latency is higher than the argument in us.
-
-**-s**, **--stack** *us*
-
-        Save the stack trace at the *IRQ* if a *Thread* latency is higher than the
-        argument in us.
-
-**-t**, **--trace** \[*file*]
-
-        Save the stopped trace to [*file|timerlat_trace.txt*].
-
-**--dma-latency** *us*
-        Set the /dev/cpu_dma_latency to *us*, aiming to bound exit from idle latencies.
-        *cyclictest* sets this value to *0* by default, use **--dma-latency** *0* to have
-        similar results.
-
-**--deepest-idle-state** *n*
-        Disable idle states higher than *n* for cpus that are running timerlat threads to
-        reduce exit from idle latencies. If *n* is -1, all idle states are disabled.
-        On exit from timerlat, the idle state setting is restored to its original state
-        before running timerlat.
-
-        Requires rtla to be built with libcpupower.
-
-**-k**, **--kernel-threads**
-
-        Use timerlat kernel-space threads, in contrast of **-u**.
-
-**-u**, **--user-threads**
-
-        Set timerlat to run without a workload, and then dispatches user-space workloads
-        to wait on the timerlat_fd. Once the workload is awakes, it goes to sleep again
-        adding so the measurement for the kernel-to-user and user-to-kernel to the tracer
-        output. **--user-threads** will be used unless the user specify **-k**.
-
-**-U**, **--user-load**
-
-        Set timerlat to run without workload, waiting for the user to dispatch a per-cpu
-        task that waits for a new period on the tracing/osnoise/per_cpu/cpu$ID/timerlat_fd.
-        See linux/tools/rtla/sample/timerlat_load.py for an example of user-load code.
--- /dev/null
+++ b/Documentation/tools/rtla/common_timerlat_options.txt
@@ -0,0 +1,67 @@
+.. |threshold|  replace:: **-a/--auto**, **-i/--irq**, or **-T/--thread**
+.. |thresharg|  replace:: -T
+.. |tracer|     replace:: timerlat
+
+.. |actionsperf| replace::
+        For time-sensitive actions, it is recommended to run **rtla timerlat** with BPF
+        support and RT priority. Note that due to implementational limitations, actions
+        might be delayed up to one second after tracing is stopped if BPF mode is not
+        available or disabled.
+
+**-a**, **--auto** *us*
+
+        Set the automatic trace mode. This mode sets some commonly used options
+        while debugging the system. It is equivalent to use **-T** *us* **-s** *us*
+        **-t**. By default, *timerlat* tracer uses FIFO:95 for *timerlat* threads,
+        thus equilavent to **-P** *f:95*.
+
+**-p**, **--period** *us*
+
+        Set the *timerlat* tracer period in microseconds.
+
+**-i**, **--irq** *us*
+
+        Stop trace if the *IRQ* latency is higher than the argument in us.
+
+**-T**, **--thread** *us*
+
+        Stop trace if the *Thread* latency is higher than the argument in us.
+
+**-s**, **--stack** *us*
+
+        Save the stack trace at the *IRQ* if a *Thread* latency is higher than the
+        argument in us.
+
+**-t**, **--trace** \[*file*]
+
+        Save the stopped trace to [*file|timerlat_trace.txt*].
+
+**--dma-latency** *us*
+        Set the /dev/cpu_dma_latency to *us*, aiming to bound exit from idle latencies.
+        *cyclictest* sets this value to *0* by default, use **--dma-latency** *0* to have
+        similar results.
+
+**--deepest-idle-state** *n*
+        Disable idle states higher than *n* for cpus that are running timerlat threads to
+        reduce exit from idle latencies. If *n* is -1, all idle states are disabled.
+        On exit from timerlat, the idle state setting is restored to its original state
+        before running timerlat.
+
+        Requires rtla to be built with libcpupower.
+
+**-k**, **--kernel-threads**
+
+        Use timerlat kernel-space threads, in contrast of **-u**.
+
+**-u**, **--user-threads**
+
+        Set timerlat to run without a workload, and then dispatches user-space workloads
+        to wait on the timerlat_fd. Once the workload is awakes, it goes to sleep again
+        adding so the measurement for the kernel-to-user and user-to-kernel to the tracer
+        output. **--user-threads** will be used unless the user specify **-k**.
+
+**-U**, **--user-load**
+
+        Set timerlat to run without workload, waiting for the user to dispatch a per-cpu
+        task that waits for a new period on the tracing/osnoise/per_cpu/cpu$ID/timerlat_fd.
+        See linux/tools/rtla/sample/timerlat_load.py for an example of user-load code.
--- a/Documentation/tools/rtla/common_top_options.rst
+++ /dev/null
@@ -1,3 +0,0 @@
-**-q**, **--quiet**
-
-        Print only a summary at the end of the session.
--- /dev/null
+++ b/Documentation/tools/rtla/common_top_options.txt
@@ -0,0 +1,3 @@
+**-q**, **--quiet**
+
+        Print only a summary at the end of the session.
--- a/Documentation/tools/rtla/rtla-hwnoise.rst
+++ b/Documentation/tools/rtla/rtla-hwnoise.rst
@@ -29,11 +29,11 @@ collection of the tracer output.
 
 OPTIONS
 =======
-.. include:: common_osnoise_options.rst
+.. include:: common_osnoise_options.txt
 
-.. include:: common_top_options.rst
+.. include:: common_top_options.txt
 
-.. include:: common_options.rst
+.. include:: common_options.txt
 
 EXAMPLE
 =======
@@ -106,4 +106,4 @@ AUTHOR
 ======
 Written by Daniel Bristot de Oliveira <bristot@kernel.org>
 
-.. include:: common_appendix.rst
+.. include:: common_appendix.txt
--- a/Documentation/tools/rtla/rtla-osnoise-hist.rst
+++ b/Documentation/tools/rtla/rtla-osnoise-hist.rst
@@ -15,7 +15,7 @@ SYNOPSIS
 
 DESCRIPTION
 ===========
-.. include:: common_osnoise_description.rst
+.. include:: common_osnoise_description.txt
 
 The **rtla osnoise hist** tool collects all **osnoise:sample_threshold**
 occurrence in a histogram, displaying the results in a user-friendly way.
@@ -24,11 +24,11 @@ collection of the tracer output.
 
 OPTIONS
 =======
-.. include:: common_osnoise_options.rst
+.. include:: common_osnoise_options.txt
 
-.. include:: common_hist_options.rst
+.. include:: common_hist_options.txt
 
-.. include:: common_options.rst
+.. include:: common_options.txt
 
 EXAMPLE
 =======
@@ -65,4 +65,4 @@ AUTHOR
 ======
 Written by Daniel Bristot de Oliveira <bristot@kernel.org>
 
-.. include:: common_appendix.rst
+.. include:: common_appendix.txt
--- a/Documentation/tools/rtla/rtla-osnoise-top.rst
+++ b/Documentation/tools/rtla/rtla-osnoise-top.rst
@@ -15,7 +15,7 @@ SYNOPSIS
 
 DESCRIPTION
 ===========
-.. include:: common_osnoise_description.rst
+.. include:: common_osnoise_description.txt
 
 **rtla osnoise top** collects the periodic summary from the *osnoise* tracer,
 including the counters of the occurrence of the interference source,
@@ -26,11 +26,11 @@ collection of the tracer output.
 
 OPTIONS
 =======
-.. include:: common_osnoise_options.rst
+.. include:: common_osnoise_options.txt
 
-.. include:: common_top_options.rst
+.. include:: common_top_options.txt
 
-.. include:: common_options.rst
+.. include:: common_options.txt
 
 EXAMPLE
 =======
@@ -60,4 +60,4 @@ AUTHOR
 ======
 Written by Daniel Bristot de Oliveira <bristot@kernel.org>
 
-.. include:: common_appendix.rst
+.. include:: common_appendix.txt
--- a/Documentation/tools/rtla/rtla-osnoise.rst
+++ b/Documentation/tools/rtla/rtla-osnoise.rst
@@ -14,7 +14,7 @@ SYNOPSIS
 DESCRIPTION
 ===========
 
-.. include:: common_osnoise_description.rst
+.. include:: common_osnoise_description.txt
 
 The *osnoise* tracer outputs information in two ways. It periodically prints
 a summary of the noise of the operating system, including the counters of
@@ -56,4 +56,4 @@ AUTHOR
 ======
 Written by Daniel Bristot de Oliveira <bristot@kernel.org>
 
-.. include:: common_appendix.rst
+.. include:: common_appendix.txt
--- a/Documentation/tools/rtla/rtla-timerlat-hist.rst
+++ b/Documentation/tools/rtla/rtla-timerlat-hist.rst
@@ -16,7 +16,7 @@ SYNOPSIS
 DESCRIPTION
 ===========
 
-.. include:: common_timerlat_description.rst
+.. include:: common_timerlat_description.txt
 
 The **rtla timerlat hist** displays a histogram of each tracer event
 occurrence. This tool uses the periodic information, and the
@@ -25,13 +25,13 @@ occurrence. This tool uses the periodic
 OPTIONS
 =======
 
-.. include:: common_timerlat_options.rst
+.. include:: common_timerlat_options.txt
 
-.. include:: common_hist_options.rst
+.. include:: common_hist_options.txt
 
-.. include:: common_options.rst
+.. include:: common_options.txt
 
-.. include:: common_timerlat_aa.rst
+.. include:: common_timerlat_aa.txt
 
 EXAMPLE
 =======
@@ -110,4 +110,4 @@ AUTHOR
 ======
 Written by Daniel Bristot de Oliveira <bristot@kernel.org>
 
-.. include:: common_appendix.rst
+.. include:: common_appendix.txt
--- a/Documentation/tools/rtla/rtla-timerlat-top.rst
+++ b/Documentation/tools/rtla/rtla-timerlat-top.rst
@@ -16,7 +16,7 @@ SYNOPSIS
 DESCRIPTION
 ===========
 
-.. include:: common_timerlat_description.rst
+.. include:: common_timerlat_description.txt
 
 The **rtla timerlat top** displays a summary of the periodic output
 from the *timerlat* tracer. It also provides information for each
@@ -26,13 +26,13 @@ seem with the option **-T**.
 OPTIONS
 =======
 
-.. include:: common_timerlat_options.rst
+.. include:: common_timerlat_options.txt
 
-.. include:: common_top_options.rst
+.. include:: common_top_options.txt
 
-.. include:: common_options.rst
+.. include:: common_options.txt
 
-.. include:: common_timerlat_aa.rst
+.. include:: common_timerlat_aa.txt
 
 **--aa-only** *us*
 
@@ -133,4 +133,4 @@ AUTHOR
 ------
 Written by Daniel Bristot de Oliveira <bristot@kernel.org>
 
-.. include:: common_appendix.rst
+.. include:: common_appendix.txt
--- a/Documentation/tools/rtla/rtla-timerlat.rst
+++ b/Documentation/tools/rtla/rtla-timerlat.rst
@@ -14,7 +14,7 @@ SYNOPSIS
 DESCRIPTION
 ===========
 
-.. include:: common_timerlat_description.rst
+.. include:: common_timerlat_description.txt
 
 The **rtla timerlat top** mode displays a summary of the periodic output
 from the *timerlat* tracer. The **rtla timerlat hist** mode displays
@@ -51,4 +51,4 @@ AUTHOR
 ======
 Written by Daniel Bristot de Oliveira <bristot@kernel.org>
 
-.. include:: common_appendix.rst
+.. include:: common_appendix.txt
--- a/Documentation/tools/rtla/rtla.rst
+++ b/Documentation/tools/rtla/rtla.rst
@@ -45,4 +45,4 @@ AUTHOR
 ======
 Daniel Bristot de Oliveira <bristot@kernel.org>
 
-.. include:: common_appendix.rst
+.. include:: common_appendix.txt

[PATCH 6.18 21/29] wifi: rtl8xxxu: Add USB ID 2001:3328 for D-Link AN3U rev. A1

[Greg Kroah-Hartman]

6.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Zenm Chen <zenmchen@gmail.com>

commit 3f9553f65d0b77b724565bbe42c4daa3fab57d5c upstream.

Add USB ID 2001:3328 for D-Link AN3U rev. A1 which is a RTL8192FU-based
Wi-Fi adapter.

Compile tested only.

Cc: stable@vger.kernel.org # 6.6.x
Signed-off-by: Zenm Chen <zenmchen@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250929035719.6172-1-zenmchen@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/realtek/rtl8xxxu/core.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/net/wireless/realtek/rtl8xxxu/core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/core.c
@@ -8136,6 +8136,9 @@ static const struct usb_device_id dev_ta
 /* TP-Link TL-WN823N V2 */
 {USB_DEVICE_AND_INTERFACE_INFO(0x2357, 0x0135, 0xff, 0xff, 0xff),
 	.driver_info = (unsigned long)&rtl8192fu_fops},
+/* D-Link AN3U rev. A1 */
+{USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x3328, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192fu_fops},
 #ifdef CONFIG_RTL8XXXU_UNTESTED
 /* Still supported by rtlwifi */
 {USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x8176, 0xff, 0xff, 0xff),

[PATCH 6.18 22/29] wifi: rtw88: Add USB ID 2001:3329 for D-Link AC13U rev. A1

[Greg Kroah-Hartman]

6.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Zenm Chen <zenmchen@gmail.com>

commit b377dcd9a286a6f81922ae442cd1c743bc4a2b35 upstream.

Add USB ID 2001:3329 for D-Link AC13U rev. A1 which is a RTL8812CU-based
Wi-Fi adapter.

Compile tested only.

Cc: stable@vger.kernel.org # 6.6.x
Signed-off-by: Zenm Chen <zenmchen@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250929035719.6172-2-zenmchen@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/realtek/rtw88/rtw8822cu.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/net/wireless/realtek/rtw88/rtw8822cu.c
+++ b/drivers/net/wireless/realtek/rtw88/rtw8822cu.c
@@ -21,6 +21,8 @@ static const struct usb_device_id rtw_88
 	  .driver_info = (kernel_ulong_t)&(rtw8822c_hw_spec) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x13b1, 0x0043, 0xff, 0xff, 0xff),
 	  .driver_info = (kernel_ulong_t)&(rtw8822c_hw_spec) }, /* Alpha - Alpha */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x3329, 0xff, 0xff, 0xff),
+	  .driver_info = (kernel_ulong_t)&(rtw8822c_hw_spec) }, /* D-Link AC13U rev. A1 */
 	{},
 };
 MODULE_DEVICE_TABLE(usb, rtw_8822cu_id_table);

[PATCH 6.18 23/29] iio: adc: ad4080: fix chip identification

[Greg Kroah-Hartman]

6.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Antoniu Miclaus <antoniu.miclaus@analog.com>

commit b66cddc8be7278fd14650ff9182f3794397f8b31 upstream.

Fix AD4080 chip identification by using the correct 16-bit product ID
(0x0050) instead of GENMASK(2, 0). Update the chip reading logic to
use regmap_bulk_read to read both PRODUCT_ID_L and PRODUCT_ID_H
registers and combine them into a 16-bit value.

The original implementation was incorrectly reading only 3 bits,
which would not correctly identify the AD4080 chip.

Fixes: 6b31ba1811b6 ("iio: adc: ad4080: add driver support")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/adc/ad4080.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

--- a/drivers/iio/adc/ad4080.c
+++ b/drivers/iio/adc/ad4080.c
@@ -125,7 +125,7 @@
 
 /* Miscellaneous Definitions */
 #define AD4080_SPI_READ						BIT(7)
-#define AD4080_CHIP_ID						GENMASK(2, 0)
+#define AD4080_CHIP_ID						0x0050
 
 #define AD4080_LVDS_CNV_CLK_CNT_MAX				7
 
@@ -445,7 +445,8 @@ static int ad4080_setup(struct iio_dev *
 {
 	struct ad4080_state *st = iio_priv(indio_dev);
 	struct device *dev = regmap_get_device(st->regmap);
-	unsigned int id;
+	__le16 id_le;
+	u16 id;
 	int ret;
 
 	ret = regmap_write(st->regmap, AD4080_REG_INTERFACE_CONFIG_A,
@@ -458,10 +459,12 @@ static int ad4080_setup(struct iio_dev *
 	if (ret)
 		return ret;
 
-	ret = regmap_read(st->regmap, AD4080_REG_CHIP_TYPE, &id);
+	ret = regmap_bulk_read(st->regmap, AD4080_REG_PRODUCT_ID_L, &id_le,
+			       sizeof(id_le));
 	if (ret)
 		return ret;
 
+	id = le16_to_cpu(id_le);
 	if (id != AD4080_CHIP_ID)
 		dev_info(dev, "Unrecognized CHIP_ID 0x%X\n", id);
 

[PATCH 6.18 24/29] comedi: c6xdigio: Fix invalid PNP driver unregistration

[Greg Kroah-Hartman]

6.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ian Abbott <abbotti@mev.co.uk>

commit 72262330f7b3ad2130e800cecf02adcce3c32c77 upstream.

The Comedi low-level driver "c6xdigio" seems to be for a parallel port
connected device.  When the Comedi core calls the driver's Comedi
"attach" handler `c6xdigio_attach()` to configure a Comedi to use this
driver, it tries to enable the parallel port PNP resources by
registering a PNP driver with `pnp_register_driver()`, but ignores the
return value.  (The `struct pnp_driver` it uses has only the `name` and
`id_table` members filled in.)  The driver's Comedi "detach" handler
`c6xdigio_detach()` unconditionally unregisters the PNP driver with
`pnp_unregister_driver()`.

It is possible for `c6xdigio_attach()` to return an error before it
calls `pnp_register_driver()` and it is possible for the call to
`pnp_register_driver()` to return an error (that is ignored).  In both
cases, the driver should not be calling `pnp_unregister_driver()` as it
does in `c6xdigio_detach()`.  (Note that `c6xdigio_detach()` will be
called by the Comedi core if `c6xdigio_attach()` returns an error, or if
the Comedi core decides to detach the Comedi device from the driver for
some other reason.)

The unconditional call to `pnp_unregister_driver()` without a previous
successful call to `pnp_register_driver()` will cause
`driver_unregister()` to issue a warning "Unexpected driver
unregister!".  This was detected by Syzbot [1].

Also, the PNP driver registration and unregistration should be done at
module init and exit time, respectively, not when attaching or detaching
Comedi devices to the driver.  (There might be more than one Comedi
device being attached to the driver, although that is unlikely.)

Change the driver to do the PNP driver registration at module init time,
and the unregistration at module exit time.  Since `c6xdigio_detach()`
now only calls `comedi_legacy_detach()`, remove the function and change
the Comedi driver "detach" handler to `comedi_legacy_detach`.

-------------------------------------------
[1] Syzbot sample crash report:
Unexpected driver unregister!
WARNING: CPU: 0 PID: 5970 at drivers/base/driver.c:273 driver_unregister drivers/base/driver.c:273 [inline]
WARNING: CPU: 0 PID: 5970 at drivers/base/driver.c:273 driver_unregister+0x90/0xb0 drivers/base/driver.c:270
Modules linked in:
CPU: 0 UID: 0 PID: 5970 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/02/2025
RIP: 0010:driver_unregister drivers/base/driver.c:273 [inline]
RIP: 0010:driver_unregister+0x90/0xb0 drivers/base/driver.c:270
Code: 48 89 ef e8 c2 e6 82 fc 48 89 df e8 3a 93 ff ff 5b 5d e9 c3 6d d9 fb e8 be 6d d9 fb 90 48 c7 c7 e0 f8 1f 8c e8 51 a2 97 fb 90 <0f> 0b 90 90 5b 5d e9 a5 6d d9 fb e8 e0 f4 41 fc eb 94 e8 d9 f4 41
RSP: 0018:ffffc9000373f9a0 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffffffff8ff24720 RCX: ffffffff817b6ee8
RDX: ffff88807c932480 RSI: ffffffff817b6ef5 RDI: 0000000000000001
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000001 R12: ffffffff8ff24660
R13: dffffc0000000000 R14: 0000000000000000 R15: ffff88814cca0000
FS:  000055556dab1500(0000) GS:ffff8881249d9000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055f77f285cd0 CR3: 000000007d871000 CR4: 00000000003526f0
Call Trace:
 <TASK>
 comedi_device_detach_locked+0x12f/0xa50 drivers/comedi/drivers.c:207
 comedi_device_detach+0x67/0xb0 drivers/comedi/drivers.c:215
 comedi_device_attach+0x43d/0x900 drivers/comedi/drivers.c:1011
 do_devconfig_ioctl+0x1b1/0x710 drivers/comedi/comedi_fops.c:872
 comedi_unlocked_ioctl+0x165d/0x2f00 drivers/comedi/comedi_fops.c:2178
 vfs_ioctl fs/ioctl.c:51 [inline]
 __do_sys_ioctl fs/ioctl.c:597 [inline]
 __se_sys_ioctl fs/ioctl.c:583 [inline]
 __x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583
 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
 do_syscall_64+0xcd/0xfa0 arch/x86/entry/syscall_64.c:94
 entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fc05798eec9
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffcf8184238 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007fc057be5fa0 RCX: 00007fc05798eec9
RDX: 0000200000000080 RSI: 0000000040946400 RDI: 0000000000000003
RBP: 00007fc057a11f91 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fc057be5fa0 R14: 00007fc057be5fa0 R15: 0000000000000003
 </TASK>
-------------------------------------------

Reported-by: syzbot+6616bba359cec7a1def1@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=6616bba359cec7a1def1
Fixes: 2c89e159cd2f ("Staging: comedi: add c6xdigio driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20251023123141.6537-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/comedi/drivers/c6xdigio.c |   46 ++++++++++++++++++++++++++++----------
 1 file changed, 35 insertions(+), 11 deletions(-)

--- a/drivers/comedi/drivers/c6xdigio.c
+++ b/drivers/comedi/drivers/c6xdigio.c
@@ -249,9 +249,6 @@ static int c6xdigio_attach(struct comedi
 	if (ret)
 		return ret;
 
-	/*  Make sure that PnP ports get activated */
-	pnp_register_driver(&c6xdigio_pnp_driver);
-
 	s = &dev->subdevices[0];
 	/* pwm output subdevice */
 	s->type		= COMEDI_SUBD_PWM;
@@ -278,19 +275,46 @@ static int c6xdigio_attach(struct comedi
 	return 0;
 }
 
-static void c6xdigio_detach(struct comedi_device *dev)
-{
-	comedi_legacy_detach(dev);
-	pnp_unregister_driver(&c6xdigio_pnp_driver);
-}
-
 static struct comedi_driver c6xdigio_driver = {
 	.driver_name	= "c6xdigio",
 	.module		= THIS_MODULE,
 	.attach		= c6xdigio_attach,
-	.detach		= c6xdigio_detach,
+	.detach		= comedi_legacy_detach,
 };
-module_comedi_driver(c6xdigio_driver);
+
+static bool c6xdigio_pnp_registered = false;
+
+static int __init c6xdigio_module_init(void)
+{
+	int ret;
+
+	ret = comedi_driver_register(&c6xdigio_driver);
+	if (ret)
+		return ret;
+
+	if (IS_ENABLED(CONFIG_PNP)) {
+		/*  Try to activate the PnP ports */
+		ret = pnp_register_driver(&c6xdigio_pnp_driver);
+		if (ret) {
+			pr_warn("failed to register pnp driver - err %d\n",
+				ret);
+			ret = 0;	/* ignore the error. */
+		} else {
+			c6xdigio_pnp_registered = true;
+		}
+	}
+
+	return 0;
+}
+module_init(c6xdigio_module_init);
+
+static void __exit c6xdigio_module_exit(void)
+{
+	if (c6xdigio_pnp_registered)
+		pnp_unregister_driver(&c6xdigio_pnp_driver);
+	comedi_driver_unregister(&c6xdigio_driver);
+}
+module_exit(c6xdigio_module_exit);
 
 MODULE_AUTHOR("Comedi https://www.comedi.org");
 MODULE_DESCRIPTION("Comedi driver for the C6x_DIGIO DSP daughter card");

[PATCH 6.18 25/29] comedi: multiq3: sanitize config options in multiq3_attach()

[Greg Kroah-Hartman]

6.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nikita Zhandarovich <n.zhandarovich@fintech.ru>

commit f24c6e3a39fa355dabfb684c9ca82db579534e72 upstream.

Syzbot identified an issue [1] in multiq3_attach() that induces a
task timeout due to open() or COMEDI_DEVCONFIG ioctl operations,
specifically, in the case of multiq3 driver.

This problem arose when syzkaller managed to craft weird configuration
options used to specify the number of channels in encoder subdevice.
If a particularly great number is passed to s->n_chan in
multiq3_attach() via it->options[2], then multiple calls to
multiq3_encoder_reset() at the end of driver-specific attach() method
will be running for minutes, thus blocking tasks and affected devices
as well.

While this issue is most likely not too dangerous for real-life
devices, it still makes sense to sanitize configuration inputs. Enable
a sensible limit on the number of encoder chips (4 chips max, each
with 2 channels) to stop this behaviour from manifesting.

[1] Syzbot crash:
INFO: task syz.2.19:6067 blocked for more than 143 seconds.
...
Call Trace:
 <TASK>
 context_switch kernel/sched/core.c:5254 [inline]
 __schedule+0x17c4/0x4d60 kernel/sched/core.c:6862
 __schedule_loop kernel/sched/core.c:6944 [inline]
 schedule+0x165/0x360 kernel/sched/core.c:6959
 schedule_preempt_disabled+0x13/0x30 kernel/sched/core.c:7016
 __mutex_lock_common kernel/locking/mutex.c:676 [inline]
 __mutex_lock+0x7e6/0x1350 kernel/locking/mutex.c:760
 comedi_open+0xc0/0x590 drivers/comedi/comedi_fops.c:2868
 chrdev_open+0x4cc/0x5e0 fs/char_dev.c:414
 do_dentry_open+0x953/0x13f0 fs/open.c:965
 vfs_open+0x3b/0x340 fs/open.c:1097
...

Reported-by: syzbot+7811bb68a317954a0347@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=7811bb68a317954a0347
Fixes: 77e01cdbad51 ("Staging: comedi: add multiq3 driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20251023132205.395753-1-n.zhandarovich@fintech.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/comedi/drivers/multiq3.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/drivers/comedi/drivers/multiq3.c
+++ b/drivers/comedi/drivers/multiq3.c
@@ -67,6 +67,11 @@
 #define MULTIQ3_TRSFRCNTR_OL		0x10	/* xfer CNTR to OL (x and y) */
 #define MULTIQ3_EFLAG_RESET		0x06	/* reset E bit of flag reg */
 
+/*
+ * Limit on the number of optional encoder channels
+ */
+#define MULTIQ3_MAX_ENC_CHANS		8
+
 static void multiq3_set_ctrl(struct comedi_device *dev, unsigned int bits)
 {
 	/*
@@ -312,6 +317,10 @@ static int multiq3_attach(struct comedi_
 	s->insn_read	= multiq3_encoder_insn_read;
 	s->insn_config	= multiq3_encoder_insn_config;
 
+	/* sanity check for number of encoder channels */
+	if (s->n_chan > MULTIQ3_MAX_ENC_CHANS)
+		s->n_chan = MULTIQ3_MAX_ENC_CHANS;
+
 	for (i = 0; i < s->n_chan; i++)
 		multiq3_encoder_reset(dev, i);
 

[PATCH 6.18 26/29] comedi: check devices attached status in compat ioctls

[Greg Kroah-Hartman]

6.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nikita Zhandarovich <n.zhandarovich@fintech.ru>

commit 0de7d9cd07a2671fa6089173bccc0b2afe6b93ee upstream.

Syzbot identified an issue [1] that crashes kernel, seemingly due to
unexistent callback dev->get_valid_routes(). By all means, this should
not occur as said callback must always be set to
get_zero_valid_routes() in __comedi_device_postconfig().

As the crash seems to appear exclusively in i386 kernels, at least,
judging from [1] reports, the blame lies with compat versions
of standard IOCTL handlers. Several of them are modified and
do not use comedi_unlocked_ioctl(). While functionality of these
ioctls essentially copy their original versions, they do not
have required sanity check for device's attached status. This,
in turn, leads to a possibility of calling select IOCTLs on a
device that has not been properly setup, even via COMEDI_DEVCONFIG.

Doing so on unconfigured devices means that several crucial steps
are missed, for instance, specifying dev->get_valid_routes()
callback.

Fix this somewhat crudely by ensuring device's attached status before
performing any ioctls, improving logic consistency between modern
and compat functions.

[1] Syzbot report:
BUG: kernel NULL pointer dereference, address: 0000000000000000
...
CR2: ffffffffffffffd6 CR3: 000000006c717000 CR4: 0000000000352ef0
Call Trace:
 <TASK>
 get_valid_routes drivers/comedi/comedi_fops.c:1322 [inline]
 parse_insn+0x78c/0x1970 drivers/comedi/comedi_fops.c:1401
 do_insnlist_ioctl+0x272/0x700 drivers/comedi/comedi_fops.c:1594
 compat_insnlist drivers/comedi/comedi_fops.c:3208 [inline]
 comedi_compat_ioctl+0x810/0x990 drivers/comedi/comedi_fops.c:3273
 __do_compat_sys_ioctl fs/ioctl.c:695 [inline]
 __se_compat_sys_ioctl fs/ioctl.c:638 [inline]
 __ia32_compat_sys_ioctl+0x242/0x370 fs/ioctl.c:638
 do_syscall_32_irqs_on arch/x86/entry/syscall_32.c:83 [inline]
...

Reported-by: syzbot+ab8008c24e84adee93ff@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=ab8008c24e84adee93ff
Fixes: 3fbfd2223a27 ("comedi: get rid of compat_alloc_user_space() mess in COMEDI_CHANINFO compat")
Cc: stable <stable@kernel.org>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://patch.msgid.link/20251023132234.395794-1-n.zhandarovich@fintech.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/comedi/comedi_fops.c |   42 ++++++++++++++++++++++++++++++++++++------
 1 file changed, 36 insertions(+), 6 deletions(-)

--- a/drivers/comedi/comedi_fops.c
+++ b/drivers/comedi/comedi_fops.c
@@ -3023,7 +3023,12 @@ static int compat_chaninfo(struct file *
 	chaninfo.rangelist = compat_ptr(chaninfo32.rangelist);
 
 	mutex_lock(&dev->mutex);
-	err = do_chaninfo_ioctl(dev, &chaninfo);
+	if (!dev->attached) {
+		dev_dbg(dev->class_dev, "no driver attached\n");
+		err = -ENODEV;
+	} else {
+		err = do_chaninfo_ioctl(dev, &chaninfo);
+	}
 	mutex_unlock(&dev->mutex);
 	return err;
 }
@@ -3044,7 +3049,12 @@ static int compat_rangeinfo(struct file
 	rangeinfo.range_ptr = compat_ptr(rangeinfo32.range_ptr);
 
 	mutex_lock(&dev->mutex);
-	err = do_rangeinfo_ioctl(dev, &rangeinfo);
+	if (!dev->attached) {
+		dev_dbg(dev->class_dev, "no driver attached\n");
+		err = -ENODEV;
+	} else {
+		err = do_rangeinfo_ioctl(dev, &rangeinfo);
+	}
 	mutex_unlock(&dev->mutex);
 	return err;
 }
@@ -3120,7 +3130,12 @@ static int compat_cmd(struct file *file,
 		return rc;
 
 	mutex_lock(&dev->mutex);
-	rc = do_cmd_ioctl(dev, &cmd, &copy, file);
+	if (!dev->attached) {
+		dev_dbg(dev->class_dev, "no driver attached\n");
+		rc = -ENODEV;
+	} else {
+		rc = do_cmd_ioctl(dev, &cmd, &copy, file);
+	}
 	mutex_unlock(&dev->mutex);
 	if (copy) {
 		/* Special case: copy cmd back to user. */
@@ -3145,7 +3160,12 @@ static int compat_cmdtest(struct file *f
 		return rc;
 
 	mutex_lock(&dev->mutex);
-	rc = do_cmdtest_ioctl(dev, &cmd, &copy, file);
+	if (!dev->attached) {
+		dev_dbg(dev->class_dev, "no driver attached\n");
+		rc = -ENODEV;
+	} else {
+		rc = do_cmdtest_ioctl(dev, &cmd, &copy, file);
+	}
 	mutex_unlock(&dev->mutex);
 	if (copy) {
 		err = put_compat_cmd(compat_ptr(arg), &cmd);
@@ -3205,7 +3225,12 @@ static int compat_insnlist(struct file *
 	}
 
 	mutex_lock(&dev->mutex);
-	rc = do_insnlist_ioctl(dev, insns, insnlist32.n_insns, file);
+	if (!dev->attached) {
+		dev_dbg(dev->class_dev, "no driver attached\n");
+		rc = -ENODEV;
+	} else {
+		rc = do_insnlist_ioctl(dev, insns, insnlist32.n_insns, file);
+	}
 	mutex_unlock(&dev->mutex);
 	kfree(insns);
 	return rc;
@@ -3224,7 +3249,12 @@ static int compat_insn(struct file *file
 		return rc;
 
 	mutex_lock(&dev->mutex);
-	rc = do_insn_ioctl(dev, &insn, file);
+	if (!dev->attached) {
+		dev_dbg(dev->class_dev, "no driver attached\n");
+		rc = -ENODEV;
+	} else {
+		rc = do_insn_ioctl(dev, &insn, file);
+	}
 	mutex_unlock(&dev->mutex);
 	return rc;
 }

[PATCH 6.18 27/29] staging: rtl8723bs: fix out-of-bounds read in rtw_get_ie() parser

[Greg Kroah-Hartman]

6.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Navaneeth K <knavaneeth786@gmail.com>

commit 154828bf9559b9c8421fc2f0d7f7f76b3683aaed upstream.

The Information Element (IE) parser rtw_get_ie() trusted the length
byte of each IE without validating that the IE body (len bytes after
the 2-byte header) fits inside the remaining frame buffer. A malformed
frame can advertise an IE length larger than the available data, causing
the parser to increment its pointer beyond the buffer end. This results
in out-of-bounds reads or, depending on the pattern, an infinite loop.

Fix by validating that (offset + 2 + len) does not exceed the limit
before accepting the IE or advancing to the next element.

This prevents OOB reads and ensures the parser terminates safely on
malformed frames.

Signed-off-by: Navaneeth K <knavaneeth786@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/rtl8723bs/core/rtw_ieee80211.c |   14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

--- a/drivers/staging/rtl8723bs/core/rtw_ieee80211.c
+++ b/drivers/staging/rtl8723bs/core/rtw_ieee80211.c
@@ -140,22 +140,24 @@ u8 *rtw_get_ie(u8 *pbuf, signed int inde
 	signed int tmp, i;
 	u8 *p;
 
-	if (limit < 1)
+	if (limit < 2)
 		return NULL;
 
 	p = pbuf;
 	i = 0;
 	*len = 0;
-	while (1) {
+	while (i + 2 <= limit) {
+		tmp = *(p + 1);
+		if (i + 2 + tmp > limit)
+			break;
+
 		if (*p == index) {
-			*len = *(p + 1);
+			*len = tmp;
 			return p;
 		}
-		tmp = *(p + 1);
+
 		p += (tmp + 2);
 		i += (tmp + 2);
-		if (i >= limit)
-			break;
 	}
 	return NULL;
 }

[PATCH 6.18 28/29] staging: rtl8723bs: fix stack buffer overflow in OnAssocReq IE parsing

[Greg Kroah-Hartman]

6.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Navaneeth K <knavaneeth786@gmail.com>

commit 6ef0e1c10455927867cac8f0ed6b49f328f8cf95 upstream.

The Supported Rates IE length from an incoming Association Request frame
was used directly as the memcpy() length when copying into a fixed-size
16-byte stack buffer (supportRate). A malicious station can advertise an
IE length larger than 16 bytes, causing a stack buffer overflow.

Clamp ie_len to the buffer size before copying the Supported Rates IE,
and correct the bounds check when merging Extended Supported Rates to
prevent a second potential overflow.

This prevents kernel stack corruption triggered by malformed association
requests.

Signed-off-by: Navaneeth K <knavaneeth786@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/rtl8723bs/core/rtw_mlme_ext.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/staging/rtl8723bs/core/rtw_mlme_ext.c
+++ b/drivers/staging/rtl8723bs/core/rtw_mlme_ext.c
@@ -1042,6 +1042,9 @@ unsigned int OnAssocReq(struct adapter *
 		status = WLAN_STATUS_CHALLENGE_FAIL;
 		goto OnAssocReqFail;
 	} else {
+		if (ie_len > sizeof(supportRate))
+			ie_len = sizeof(supportRate);
+
 		memcpy(supportRate, p+2, ie_len);
 		supportRateNum = ie_len;
 
@@ -1049,7 +1052,7 @@ unsigned int OnAssocReq(struct adapter *
 				pkt_len - WLAN_HDR_A3_LEN - ie_offset);
 		if (p) {
 
-			if (supportRateNum <= sizeof(supportRate)) {
+			if (supportRateNum + ie_len <= sizeof(supportRate)) {
 				memcpy(supportRate+supportRateNum, p+2, ie_len);
 				supportRateNum += ie_len;
 			}

[PATCH 6.18 29/29] staging: rtl8723bs: fix out-of-bounds read in OnBeacon ESR IE parsing

[Greg Kroah-Hartman]

6.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Navaneeth K <knavaneeth786@gmail.com>

commit 502ddcc405b69fa92e0add6c1714d654504f6fd7 upstream.

The Extended Supported Rates (ESR) IE handling in OnBeacon accessed
*(p + 1 + ielen) and *(p + 2 + ielen) without verifying that these
offsets lie within the received frame buffer. A malformed beacon with
an ESR IE positioned at the end of the buffer could cause an
out-of-bounds read, potentially triggering a kernel panic.

Add a boundary check to ensure that the ESR IE body and the subsequent
bytes are within the limits of the frame before attempting to access
them.

This prevents OOB reads caused by malformed beacon frames.

Signed-off-by: Navaneeth K <knavaneeth786@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/rtl8723bs/core/rtw_mlme_ext.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

--- a/drivers/staging/rtl8723bs/core/rtw_mlme_ext.c
+++ b/drivers/staging/rtl8723bs/core/rtw_mlme_ext.c
@@ -588,9 +588,11 @@ unsigned int OnBeacon(struct adapter *pa
 
 	p = rtw_get_ie(pframe + sizeof(struct ieee80211_hdr_3addr) + _BEACON_IE_OFFSET_, WLAN_EID_EXT_SUPP_RATES, &ielen, precv_frame->u.hdr.len - sizeof(struct ieee80211_hdr_3addr) - _BEACON_IE_OFFSET_);
 	if (p && ielen > 0) {
-		if ((*(p + 1 + ielen) == 0x2D) && (*(p + 2 + ielen) != 0x2D))
-			/* Invalid value 0x2D is detected in Extended Supported Rates (ESR) IE. Try to fix the IE length to avoid failed Beacon parsing. */
-			*(p + 1) = ielen - 1;
+		if (p + 2 + ielen < pframe + len) {
+			if ((*(p + 1 + ielen) == 0x2D) && (*(p + 2 + ielen) != 0x2D))
+				/* Invalid value 0x2D is detected in Extended Supported Rates (ESR) IE. Try to fix the IE length to avoid failed Beacon parsing. */
+				*(p + 1) = ielen - 1;
+		}
 	}
 
 	if (pmlmeext->sitesurvey_res.state == SCAN_PROCESS) {

Re: [PATCH 6.18 00/29] 6.18.1-rc1 review

[Brett A C Sheffield]

# Librecast Test Results

020/020 [ OK ] liblcrq
010/010 [ OK ] libmld
120/120 [ OK ] liblibrecast

CPU/kernel: Linux auntie 6.18.1-rc1-g7d4c06f4000f #1 SMP PREEMPT_DYNAMIC Wed Dec 10 10:11:19 -00 2025 x86_64 AMD Ryzen 9 9950X 16-Core Processor AuthenticAMD GNU/Linux

Tested-by: Brett A C Sheffield <bacs@librecast.net>

Re: [PATCH 6.18 00/29] 6.18.1-rc1 review

[Takeshi Ogasawara]

Hi Greg

On Wed, Dec 10, 2025 at 4:36 PM Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 6.18.1 release.
> There are 29 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 12 Dec 2025 07:29:36 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.18.1-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.18.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>

6.18.1-rc1 tested.

Build successfully completed.
Boot successfully completed.
No dmesg regressions.
Video output normal.
Sound output normal.

Lenovo ThinkPad X1 Carbon Gen10(Intel i7-1260P(x86_64) arch linux)

[    0.000000] Linux version 6.18.1-rc1rv-g7d4c06f4000f
(takeshi@ThinkPadX1Gen10J0764) (gcc (GCC) 15.2.1 20251112, GNU ld (GNU
Binutils) 2.45.1) #1 SMP PREEMPT_DYNAMIC Wed Dec 10 20:19:12 JST 2025

Thanks

Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>

Re: [PATCH 6.18 00/29] 6.18.1-rc1 review

[Jeffrin Thalakkottoor]

 compiled and booted  6.18.1-rc1+
Version: AMD A4-4000 APU with Radeon(tm) HD Graphics
NO typical dmesg regressions

Tested-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in>

--
software engineer
rajagiri school of engineering and technology

Re: [PATCH 6.18 00/29] 6.18.1-rc1 review

[Achill Gilgenast]

On Wed Dec 10, 2025 at 8:30 AM CET, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.18.1 release.
> There are 29 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 12 Dec 2025 07:29:36 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.18.1-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.18.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Thanks! Build tested on all Alpine architectures & boot tested on
x86_64.

Tested-By: Achill Gilgenast <achill@achill.org>

Re: [PATCH 6.18 00/29] 6.18.1-rc1 review

[Peter Schneider]

Am 10.12.2025 um 08:30 schrieb Greg Kroah-Hartman:
> This is the start of the stable review cycle for the 6.18.1 release.
> There are 29 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

Builds, boots and works on my 2-socket Ivy Bridge Xeon E5-2697 v2 server. No dmesg oddities or regressions found.

Tested-by: Peter Schneider <pschneider1968@googlemail.com>


Beste Grüße,
Peter Schneider

-- 
Climb the mountain not to plant your flag, but to embrace the challenge,
enjoy the air and behold the view. Climb it so you can see the world,
not so the world can see you.                    -- David McCullough Jr.

OpenPGP:  0xA3828BD796CCE11A8CADE8866E3A92C92C3FF244
Download: https://www.peters-netzplatz.de/download/pschneider1968_pub.asc
https://keys.mailvelope.com/pks/lookup?op=get&search=pschneider1968@googlemail.com
https://keys.mailvelope.com/pks/lookup?op=get&search=pschneider1968@gmail.com

Re: [PATCH 6.18 00/29] 6.18.1-rc1 review

[Florian Fainelli]

On 12/9/25 23:30, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.18.1 release.
> There are 29 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 12 Dec 2025 07:29:36 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.18.1-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.18.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on 
BMIPS_GENERIC:

Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
-- 
Florian

Re: [PATCH 6.18 00/29] 6.18.1-rc1 review

[Hardik Garg]

The kernel, bpf tool, perf tool, and kselftest builds fine for v6.18.1-rc1 on x86 and arm64 Azure VM.


Tested-by: Hardik Garg <hargar@linux.microsoft.com>


Thanks,
Hardik

Re: [PATCH 6.18 00/29] 6.18.1-rc1 review

[Dileep malepu]

On Thu, Dec 11, 2025 at 1:12 AM Florian Fainelli <f.fainelli@gmail.com> wrote:
>
> On 12/9/25 23:30, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 6.18.1 release.
> > There are 29 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Fri, 12 Dec 2025 07:29:36 +0000.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> >       https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.18.1-rc1.gz
> > or in the git tree and branch at:
> >       git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.18.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h

Build and Boot Report for 6.18.1-rc1

The kernel version 6.18.1 was built and boot-tested using qemu-x86_64
and qemu-arm64 with the default configuration (defconfig). The build and boot
processes completed successfully, and the kernel operated as expected
in the virtualized environments without any issues.
No dmesg regressions found.

Build Details :
Builds : arm64, x86_64
Kernel Version: 6.18.1
Configuration : defconfig
Source: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Commit : 7d4c06f4000feb509a90ba5eeb00be9839decb91

Tested-by: Dileep Malepu <dileep.debian@gmail.com>

Best regards,
Dileep Malepu

Re: [PATCH 6.18 00/29] 6.18.1-rc1 review

[Ronald Warsow]

Hi

no regressions here on x86_64 (RKL, Intel 11th Gen. CPU)

Thanks

Tested-by: Ronald Warsow <rwarsow@gmx.de>

Re: [PATCH 6.18 00/29] 6.18.1-rc1 review

[Ron Economos]

On 12/9/25 23:30, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.18.1 release.
> There are 29 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 12 Dec 2025 07:29:36 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.18.1-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.18.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Built and booted successfully on RISC-V RV64 (HiFive Unmatched).

Tested-by: Ron Economos <re@w6rz.net>

Re: [PATCH 6.18 00/29] 6.18.1-rc1 review

[Naresh Kamboju]

On Wed, 10 Dec 2025 at 13:06, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 6.18.1 release.
> There are 29 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 12 Dec 2025 07:29:36 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.18.1-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.18.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 6.18.1-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git commit: 7d4c06f4000feb509a90ba5eeb00be9839decb91
* git describe: v6.18-30-g7d4c06f4000f
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.18.y/build/v6.18-30-g7d4c06f4000f

## Test Regressions (compared to v6.18-30-g7d4c06f4000f)

## Metric Regressions (compared to v6.18-30-g7d4c06f4000f)

## Test Fixes (compared to v6.18-30-g7d4c06f4000f)

## Metric Fixes (compared to v6.18-30-g7d4c06f4000f)

## Test result summary
total: 105808, pass: 88879, fail: 3320, skip: 13609, xfail: 0

## Build Summary
* arc: 5 total, 5 passed, 0 failed
* arm: 139 total, 139 passed, 0 failed
* arm64: 57 total, 54 passed, 3 failed
* i386: 18 total, 18 passed, 0 failed
* mips: 34 total, 33 passed, 1 failed
* parisc: 4 total, 4 passed, 0 failed
* powerpc: 40 total, 39 passed, 1 failed
* riscv: 25 total, 25 passed, 0 failed
* s390: 22 total, 22 passed, 0 failed
* sh: 5 total, 5 passed, 0 failed
* sparc: 4 total, 3 passed, 1 failed
* x86_64: 49 total, 48 passed, 1 failed

## Test suites summary
* boot
* commands
* kselftest-arm64
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-exec
* kselftest-fpu
* kselftest-ftrace
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-kcmp
* kselftest-kvm
* kselftest-membarrier
* kselftest-memfd
* kselftest-mincore
* kselftest-mm
* kselftest-mqueue
* kselftest-net
* kselftest-net-mptcp
* kselftest-openat2
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-rust
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-tc-testing
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user_events
* kselftest-vDSO
* kselftest-x86
* kunit
* kvm-unit-tests
* lava
* libgpiod
* libhugetlbfs
* log-parser-boot
* log-parser-build-clang
* log-parser-build-gcc
* log-parser-test
* ltp-capability
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-hugetlb
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-pty
* ltp-sched
* ltp-smoke
* ltp-syscalls
* ltp-tracing
* perf
* rcutorture
* rt-tests-cyclicdeadline
* rt-tests-pmqtest
* rt-tests-rt-migrate-test
* rt-tests-signaltest

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 6.18 00/29] 6.18.1-rc1 review

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 344 bytes --]

On Wed, Dec 10, 2025 at 04:30:10PM +0900, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.18.1 release.
> There are 29 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

Tested-by: Mark Brown <broonie@kernel.org>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH 6.18 00/29] 6.18.1-rc1 review

[Jon Hunter]

On Wed, 10 Dec 2025 16:30:10 +0900, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.18.1 release.
> There are 29 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 12 Dec 2025 07:29:36 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.18.1-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.18.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v6.18:
    10 builds:	10 pass, 0 fail
    28 boots:	28 pass, 0 fail
    113 tests:	113 pass, 0 fail

Linux version:	6.18.1-rc1-g7d4c06f4000f
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra186-p3509-0000+p3636-0001, tegra194-p2972-0000,
                tegra194-p3509-0000+p3668-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra210-p3450-0000,
                tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon