[PATCH 6.12 120/244] ASoC: Intel: catpt: Fix the device initialization

Greg Kroah-Hartman
2026-03-31T16:51:13Z

From: Cezary Rojewski <cezary.rojewski@intel.com>

[ Upstream commit 5a184f1cb43a8e035251c635f5c47da5dc3e3049 ]

The DMA mask shall be coerced before any buffer allocations for the
device are done. At the same time explain why DMA mask of 31 bits is
used in the first place.

Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fixes: 7a10b66a5df9 ("ASoC: Intel: catpt: Device driver lifecycle")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260320101217.1243688-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/intel/catpt/device.c | 10 +++++++++-
sound/soc/intel/catpt/dsp.c | 3 ---
2 files changed, 9 insertions(+), 4 deletions(-)

diff --git a/sound/soc/intel/catpt/device.c b/sound/soc/intel/catpt/device.c
index 2aa637124bec6..37f4d116e6c26 100644
--- a/sound/soc/intel/catpt/device.c
+++ b/sound/soc/intel/catpt/device.c
@@ -271,7 +271,15 @@ static int catpt_acpi_probe(struct platform_device *pdev)
if (IS_ERR(cdev->pci_ba))
return PTR_ERR(cdev->pci_ba);

- /* alloc buffer for storing DRAM context during dx transitions */
+ /*
+ * As per design HOST is responsible for preserving firmware's runtime
+ * context during D0 -> D3 -> D0 transitions. Addresses used for DMA
+ * to/from HOST memory shall be outside the reserved range of 0xFFFxxxxx.
+ */
+ ret = dma_coerce_mask_and_coherent(cdev->dev, DMA_BIT_MASK(31));
+ if (ret)
+ return ret;
+
cdev->dxbuf_vaddr = dmam_alloc_coherent(dev, catpt_dram_size(cdev),
&cdev->dxbuf_paddr, GFP_KERNEL);
if (!cdev->dxbuf_vaddr)
diff --git a/sound/soc/intel/catpt/dsp.c b/sound/soc/intel/catpt/dsp.c
index 5993819cc58a2..8e4836605e8e1 100644
--- a/sound/soc/intel/catpt/dsp.c
+++ b/sound/soc/intel/catpt/dsp.c
@@ -125,9 +125,6 @@ int catpt_dmac_probe(struct catpt_dev *cdev)
dmac->dev = cdev->dev;
dmac->irq = cdev->irq;

- ret = dma_coerce_mask_and_coherent(cdev->dev, DMA_BIT_MASK(31));
- if (ret)
- return ret;
/*
* Caller is responsible for putting device in D0 to allow
* for I/O and memory access before probing DW.
--
2.53.0