From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: stable@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
patches@lists.linux.dev,
Mingyu Wang <25181214217@stu.xidian.edu.cn>,
Lukas Wunner <lukas@wunner.de>
Subject: [PATCH 6.18 12/60] agp/amd64: Fix broken error propagation in agp_amd64_probe()
Date: Thu, 25 Jun 2026 14:02:57 +0100 [thread overview]
Message-ID: <20260625125647.309145181@linuxfoundation.org> (raw)
In-Reply-To: <20260625125645.554579168@linuxfoundation.org>
6.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mingyu Wang <25181214217@stu.xidian.edu.cn>
commit b08472db93b1ccff84a7adec5779d47f0e9d3a30 upstream.
A NULL pointer dereference was observed in the AMD64 AGP driver when
running in a virtualized environment (e.g. qemu/kvm) without a physical
AMD northbridge. The crash occurs in amd64_fetch_size() when attempting
to dereference the pointer returned by node_to_amd_nb(0).
The root cause of this crash is broken error propagation in
agp_amd64_probe(): When no AMD northbridges are found, cache_nbs()
correctly returns -ENODEV. However, the probe function erroneously
checks the return value against exactly -1, rather than < 0.
As a result, the hardware absence error is masked, allowing the driver
to improperly proceed with initialization. It eventually calls
agp_add_bridge(), which invokes amd64_fetch_size(). Since the hardware
does not exist, node_to_amd_nb(0) returns NULL, leading to a General
Protection Fault (GPF) when accessing its ->misc member.
Fix the issue by correcting the error check in agp_amd64_probe() to
abort properly when cache_nbs() returns any negative error code. This
prevents the driver from erroneously proceeding without hardware, thereby
avoiding the subsequent NULL pointer dereference at its source.
Fixes: a32073bffc65 ("[PATCH] x86_64: Clean and enhance up K8 northbridge access code")
Signed-off-by: Mingyu Wang <25181214217@stu.xidian.edu.cn>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v2.6.18+
Link: https://patch.msgid.link/20260504074823.99377-1-w15303746062@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/char/agp/amd64-agp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/char/agp/amd64-agp.c
+++ b/drivers/char/agp/amd64-agp.c
@@ -546,7 +546,7 @@ static int agp_amd64_probe(struct pci_de
/* Fill in the mode register */
pci_read_config_dword(pdev, bridge->capndx+PCI_AGP_STATUS, &bridge->mode);
- if (cache_nbs(pdev, cap_ptr) == -1) {
+ if (cache_nbs(pdev, cap_ptr) < 0) {
agp_put_bridge(bridge);
return -ENODEV;
}
next prev parent reply other threads:[~2026-06-25 13:06 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-25 13:02 [PATCH 6.18 00/60] 6.18.37-rc1 review Greg Kroah-Hartman
2026-06-25 13:02 ` [PATCH 6.18 01/60] io_uring/net: Avoid msghdr on op_connect/op_bind async data Greg Kroah-Hartman
2026-06-25 13:02 ` [PATCH 6.18 02/60] net: stmmac: fix stm32 (and potentially others) resume regression Greg Kroah-Hartman
2026-06-25 13:02 ` [PATCH 6.18 03/60] fuse: re-lock request before replacing page cache folio Greg Kroah-Hartman
2026-06-25 13:02 ` [PATCH 6.18 04/60] Revert "NFSD: Defer sub-object cleanup in export put callbacks" Greg Kroah-Hartman
2026-06-25 13:02 ` [PATCH 6.18 05/60] debugobjects: Allow to refill the pool before SYSTEM_SCHEDULING Greg Kroah-Hartman
2026-06-25 13:02 ` [PATCH 6.18 06/60] debugobjects: Use LD_WAIT_CONFIG instead of LD_WAIT_SLEEP Greg Kroah-Hartman
2026-06-25 13:02 ` [PATCH 6.18 07/60] debugobjects: Do not fill_pool() if pi_blocked_on Greg Kroah-Hartman
2026-06-25 13:02 ` [PATCH 6.18 08/60] debugobjects: Dont call fill_pool() in early boot hardirq context Greg Kroah-Hartman
2026-06-25 13:02 ` [PATCH 6.18 09/60] RDMA/bnxt_re: zero shared page before exposing to userspace Greg Kroah-Hartman
2026-06-25 13:02 ` [PATCH 6.18 10/60] i2c: stub: Reject I2C block transfers with invalid length Greg Kroah-Hartman
2026-06-25 13:02 ` [PATCH 6.18 11/60] net: qualcomm: rmnet: fix endpoint use-after-free in rmnet_dellink() Greg Kroah-Hartman
2026-06-25 13:02 ` Greg Kroah-Hartman [this message]
2026-06-25 13:02 ` [PATCH 6.18 13/60] ACPI: scan: Use async schedule function in acpi_scan_clear_dep_fn() Greg Kroah-Hartman
2026-06-25 13:02 ` [PATCH 6.18 14/60] rose: fix dev_put() leak in rose_loopback_timer() Greg Kroah-Hartman
2026-06-25 13:03 ` [PATCH 6.18 15/60] rose: hold loopback neighbour reference across timer callback Greg Kroah-Hartman
2026-06-25 13:03 ` [PATCH 6.18 16/60] rose: fix race between loopback timer and module removal Greg Kroah-Hartman
2026-06-25 13:03 ` [PATCH 6.18 17/60] rose: clear neighbour pointer after rose_neigh_put() in state machines Greg Kroah-Hartman
2026-06-25 13:03 ` [PATCH 6.18 18/60] rose: guard rose_neigh_put() against NULL in timer expiry Greg Kroah-Hartman
2026-06-25 13:03 ` [PATCH 6.18 19/60] rose: fix netdev double-hold in rose_rx_call_request() Greg Kroah-Hartman
2026-06-25 13:03 ` [PATCH 6.18 20/60] rose: fix notifier unregistered too early in rose_exit() Greg Kroah-Hartman
2026-06-25 13:03 ` [PATCH 6.18 21/60] rose: set SOCK_DESTROY in rose_kill_by_device() for prompt cleanup Greg Kroah-Hartman
2026-06-25 13:03 ` [PATCH 6.18 22/60] rose: disconnect orphaned STATE_2 sockets when device is gone Greg Kroah-Hartman
2026-06-25 13:03 ` [PATCH 6.18 23/60] rose: fix netdev double-hold in rose_make_new() Greg Kroah-Hartman
2026-06-25 13:03 ` [PATCH 6.18 24/60] rose: release netdev ref and destroy orphaned incoming sockets Greg Kroah-Hartman
2026-06-25 13:03 ` [PATCH 6.18 25/60] rose: drop CALL_REQUEST in loopback timer when device is not running Greg Kroah-Hartman
2026-06-25 13:03 ` [PATCH 6.18 26/60] rose: cancel neighbour timers in rose_neigh_put() before freeing Greg Kroah-Hartman
2026-06-25 13:03 ` [PATCH 6.18 27/60] rose: clear neighbour pointer in rose_kill_by_device() Greg Kroah-Hartman
2026-06-25 13:03 ` [PATCH 6.18 28/60] rose: dont free fd-owned sockets when reaping in the heartbeat Greg Kroah-Hartman
2026-06-25 13:03 ` [PATCH 6.18 29/60] regulator: core: fix locking in regulator_resolve_supply() error path Greg Kroah-Hartman
2026-06-25 13:03 ` [PATCH 6.18 30/60] hv: utils: handle and propagate errors in kvp_register Greg Kroah-Hartman
2026-06-25 13:03 ` [PATCH 6.18 31/60] Drivers: hv: vmbus: Improve the logic of reserving fb_mmio on Gen2 VMs Greg Kroah-Hartman
2026-06-25 13:03 ` [PATCH 6.18 32/60] firmware: samsung: acpm: Fix cross-thread RX length corruption Greg Kroah-Hartman
2026-06-25 13:03 ` [PATCH 6.18 33/60] sctp: disable BH before calling udp_tunnel_xmit_skb() Greg Kroah-Hartman
2026-06-25 13:03 ` [PATCH 6.18 34/60] mm: introduce VM_MAYBE_GUARD and make visible in /proc/$pid/smaps Greg Kroah-Hartman
2026-06-25 13:03 ` [PATCH 6.18 35/60] mm: add atomic VMA flags and set VM_MAYBE_GUARD as such Greg Kroah-Hartman
2026-06-25 13:03 ` [PATCH 6.18 36/60] mm: update vma_modify_flags() to handle residual flags, document Greg Kroah-Hartman
2026-06-25 13:03 ` [PATCH 6.18 37/60] mm: implement sticky VMA flags Greg Kroah-Hartman
2026-06-25 13:03 ` [PATCH 6.18 38/60] mm: introduce copy-on-fork VMAs and make VM_MAYBE_GUARD one Greg Kroah-Hartman
2026-06-25 13:03 ` [PATCH 6.18 39/60] mm: set the VM_MAYBE_GUARD flag on guard region install Greg Kroah-Hartman
2026-06-25 13:03 ` [PATCH 6.18 40/60] mm: propagate VM_SOFTDIRTY on merge Greg Kroah-Hartman
2026-06-25 13:03 ` [PATCH 6.18 41/60] testing/selftests/mm: add soft-dirty merge self-test Greg Kroah-Hartman
2026-06-25 13:03 ` [PATCH 6.18 42/60] net: export netif_open for self_test usage Greg Kroah-Hartman
2026-06-25 13:03 ` [PATCH 6.18 43/60] net: net_failover: Fix the deadlock in slave register Greg Kroah-Hartman
2026-06-25 13:03 ` [PATCH 6.18 44/60] iio: light: veml6075: add bounds check to veml6075_it_ms index Greg Kroah-Hartman
2026-06-25 13:03 ` [PATCH 6.18 45/60] iio: adc: ti-ads1298: add bounds check to pga_settings index Greg Kroah-Hartman
2026-06-25 13:03 ` [PATCH 6.18 46/60] Input: rmi4 - fix register descriptor address calculation Greg Kroah-Hartman
2026-06-25 13:03 ` [PATCH 6.18 47/60] Input: rmi4 - refactor register descriptor parsing Greg Kroah-Hartman
2026-06-25 13:03 ` [PATCH 6.18 48/60] Input: rmi4 - fix type overflow in register counts Greg Kroah-Hartman
2026-06-25 13:03 ` [PATCH 6.18 49/60] Input: rmi4 - fix num_subpackets overflow in register descriptor Greg Kroah-Hartman
2026-06-25 13:03 ` [PATCH 6.18 50/60] Input: rmi4 - fix memory leak in rmi_set_attn_data() Greg Kroah-Hartman
2026-06-25 13:03 ` [PATCH 6.18 51/60] Input: rmi4 - iterative IRQ handler Greg Kroah-Hartman
2026-06-25 13:03 ` [PATCH 6.18 52/60] Input: rmi4 - fix bit count in bitmap_copy() Greg Kroah-Hartman
2026-06-25 13:03 ` [PATCH 6.18 53/60] crypto: qat - remove unused character device and IOCTLs Greg Kroah-Hartman
2026-06-25 13:03 ` [PATCH 6.18 54/60] vc_screen: fix null-ptr-deref in vcs_notifier() during concurrent vcs_write Greg Kroah-Hartman
2026-06-25 13:03 ` [PATCH 6.18 55/60] serial: qcom_geni: Fix RX DMA stall when SE_DMA_RX_LEN_IN is zero Greg Kroah-Hartman
2026-06-25 13:03 ` [PATCH 6.18 56/60] drivers/base/memory: set mem->altmap after successful device registration Greg Kroah-Hartman
2026-06-25 13:03 ` [PATCH 6.18 57/60] ksmbd: reject non-VALID session in compound request branch Greg Kroah-Hartman
2026-06-25 13:03 ` [PATCH 6.18 58/60] media: vidtv: fix NULL pointer dereference in vidtv_mux_push_si Greg Kroah-Hartman
2026-06-25 13:03 ` [PATCH 6.18 59/60] virtiofs: fix UAF on submount umount Greg Kroah-Hartman
2026-06-25 13:03 ` [PATCH 6.18 60/60] mm: do not copy page tables unnecessarily for VM_UFFD_WP Greg Kroah-Hartman
2026-06-25 13:33 ` [PATCH 6.18 00/60] 6.18.37-rc1 review Florian Fainelli
2026-06-25 15:27 ` Brett A C Sheffield
2026-06-25 17:11 ` Peter Schneider
2026-06-26 0:04 ` Shuah Khan
2026-06-26 5:11 ` Ron Economos
2026-06-26 10:58 ` Miguel Ojeda
2026-06-26 13:27 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260625125647.309145181@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=25181214217@stu.xidian.edu.cn \
--cc=lukas@wunner.de \
--cc=patches@lists.linux.dev \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox