[PATCH 5.10 23/96] i2c: stub: Reject I2C block transfers with invalid length

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Weiming Shi <bestswngs@gmail.com>

commit 6036b5067a8199ba7a2dc7b377d4b9dd276d5f9e upstream.

The I2C_SMBUS_I2C_BLOCK_DATA case in stub_xfer() uses data->block[0]
as the transfer length. The existing check only clamps it to avoid
overrunning the chip->words[256] register array, but does not validate
it against I2C_SMBUS_BLOCK_MAX (32), which is the limit of the union
i2c_smbus_data.block buffer (34 bytes total). The driver is a
development/test tool (CONFIG_I2C_STUB=m, not built by default)
that must be loaded with a chip_addr= parameter.

A local user with access to /dev/i2c-* can issue an I2C_SMBUS ioctl
with I2C_SMBUS_I2C_BLOCK_DATA and data->block[0] > 32, causing
stub_xfer() to read or write past the end of the union
i2c_smbus_data.block buffer:

 BUG: KASAN: stack-out-of-bounds in stub_xfer (drivers/i2c/i2c-stub.c:223)
 Read of size 1 at addr ffff88800abcfd92 by task exploit/81
 Call Trace:
  <TASK>
  stub_xfer (drivers/i2c/i2c-stub.c:223)
  __i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:593)
  i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:536)
  i2cdev_ioctl_smbus (drivers/i2c/i2c-dev.c:391)
  i2cdev_ioctl (drivers/i2c/i2c-dev.c:478)
  __x64_sys_ioctl (fs/ioctl.c:583)
  do_syscall_64 (arch/x86/entry/syscall_64.c:94)
  entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
  </TASK>

The bug exists because i2c-stub implements .smbus_xfer directly,
bypassing the I2C_SMBUS_BLOCK_MAX validation in
i2c_smbus_xfer_emulated(). The I2C_SMBUS_BLOCK_DATA case in the same
function correctly validates against I2C_SMBUS_BLOCK_MAX, but the
I2C_SMBUS_I2C_BLOCK_DATA case does not.

Fix by rejecting transfers with data->block[0] == 0 or
data->block[0] > I2C_SMBUS_BLOCK_MAX with -EINVAL, consistent with
both the I2C_SMBUS_BLOCK_DATA case in the same function and the
I2C_SMBUS_I2C_BLOCK_DATA validation in i2c_smbus_xfer_emulated().

Fixes: 4710317891e4 ("i2c-stub: Implement I2C block support")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/i2c/i2c-stub.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/i2c/i2c-stub.c
+++ b/drivers/i2c/i2c-stub.c
@@ -215,6 +215,11 @@ static s32 stub_xfer(struct i2c_adapter
 		 * We ignore banks here, because banked chips don't use I2C
 		 * block transfers
 		 */
+		if (data->block[0] == 0 ||
+		    data->block[0] > I2C_SMBUS_BLOCK_MAX) {
+			ret = -EINVAL;
+			break;
+		}
 		if (data->block[0] > 256 - command)	/* Avoid overrun */
 			data->block[0] = 256 - command;
 		len = data->block[0];