[PATCH 6.1 030/129] ARM: fix branch predictor hardening

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

commit fd2dee1c6e2256f726ba33fd3083a7be0efc80d3 upstream.

__do_user_fault() may be called with indeterminent interrupt enable
state, which means we may be preemptive at this point. This causes
problems when calling harden_branch_predictor(). For example, when
called from a data abort, do_alignment_fault()->do_bad_area().

Move harden_branch_predictor() out of __do_user_fault() and into the
calling contexts.

Moving it into do_kernel_address_page_fault(), we can be sure that
interrupts will be disabled here.

Converting do_translation_fault() to use do_kernel_address_page_fault()
rather than do_bad_area() means that we keep branch predictor handling
for translation faults. Interrupts will also be disabled at this call
site.

do_sect_fault() needs special handling, so detect user mode accesses
to kernel-addresses, and add an explicit call to branch predictor
hardening.

Finally, add branch predictor hardening to do_alignment() for the
faulting case (user mode accessing kernel addresses) before interrupts
are enabled.

This should cover all cases where harden_branch_predictor() is called,
ensuring that it is always has interrupts disabled, also ensuring that
it is called early in each call path.

Reviewed-by: Xie Yuanbin <xieyuanbin1@huawei.com>
Tested-by: Xie Yuanbin <xieyuanbin1@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mm/alignment.c |  4 ++++
 arch/arm/mm/fault.c     | 39 ++++++++++++++++++++++++++-------------
 2 files changed, 30 insertions(+), 13 deletions(-)

diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index f8dd0b3cc8e040..ee264737be6d26 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -22,6 +22,7 @@
 
 #include <asm/cp15.h>
 #include <asm/system_info.h>
+#include <asm/system_misc.h>
 #include <asm/unaligned.h>
 #include <asm/opcodes.h>
 
@@ -809,6 +810,9 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	int thumb2_32b = 0;
 	int fault;
 
+	if (addr >= TASK_SIZE && user_mode(regs))
+		harden_branch_predictor();
+
 	if (interrupts_enabled(regs))
 		local_irq_enable();
 
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 907705992ab65f..d0681285dbda3e 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -195,9 +195,6 @@ __do_user_fault(unsigned long addr, unsigned int fsr, unsigned int sig,
 {
 	struct task_struct *tsk = current;
 
-	if (addr > TASK_SIZE)
-		harden_branch_predictor();
-
 #ifdef CONFIG_DEBUG_USER
 	if (((user_debug & UDBG_SEGV) && (sig == SIGSEGV)) ||
 	    ((user_debug & UDBG_BUS)  && (sig == SIGBUS))) {
@@ -248,8 +245,10 @@ do_kernel_address_page_fault(struct mm_struct *mm, unsigned long addr,
 		/*
 		 * Fault from user mode for a kernel space address. User mode
 		 * should not be faulting in kernel space, which includes the
-		 * vector/khelper page. Send a SIGSEGV.
+		 * vector/khelper page. Handle the branch predictor hardening
+		 * while interrupts are still disabled, then send a SIGSEGV.
 		 */
+		harden_branch_predictor();
 		__do_user_fault(addr, fsr, SIGSEGV, SEGV_MAPERR, regs);
 	} else {
 		/*
@@ -419,16 +418,20 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
  * We enter here because the first level page table doesn't contain
  * a valid entry for the address.
  *
- * If the address is in kernel space (>= TASK_SIZE), then we are
- * probably faulting in the vmalloc() area.
+ * If this is a user address (addr < TASK_SIZE), we handle this as a
+ * normal page fault. This leaves the remainder of the function to handle
+ * kernel address translation faults.
  *
- * If the init_task's first level page tables contains the relevant
- * entry, we copy the it to this task.  If not, we send the process
- * a signal, fixup the exception, or oops the kernel.
+ * Since user mode is not permitted to access kernel addresses, pass these
+ * directly to do_kernel_address_page_fault() to handle.
  *
- * NOTE! We MUST NOT take any locks for this case. We may be in an
- * interrupt or a critical region, and should only copy the information
- * from the master page table, nothing more.
+ * Otherwise, we're probably faulting in the vmalloc() area, so try to fix
+ * that up. Note that we must not take any locks or enable interrupts in
+ * this case.
+ *
+ * If vmalloc() fixup fails, that means the non-leaf page tables did not
+ * contain an entry for this address, so handle this via
+ * do_kernel_address_page_fault().
  */
 #ifdef CONFIG_MMU
 static int __kprobes
@@ -494,7 +497,8 @@ do_translation_fault(unsigned long addr, unsigned int fsr,
 	return 0;
 
 bad_area:
-	do_bad_area(addr, fsr, regs);
+	do_kernel_address_page_fault(current->mm, addr, fsr, regs);
+
 	return 0;
 }
 #else					/* CONFIG_MMU */
@@ -514,7 +518,16 @@ do_translation_fault(unsigned long addr, unsigned int fsr,
 static int
 do_sect_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 {
+	/*
+	 * If this is a kernel address, but from user mode, then userspace
+	 * is trying bad stuff. Invoke the branch predictor handling.
+	 * Interrupts are disabled here.
+	 */
+	if (addr >= TASK_SIZE && user_mode(regs))
+		harden_branch_predictor();
+
 	do_bad_area(addr, fsr, regs);
+
 	return 0;
 }
 #endif /* CONFIG_ARM_LPAE */
-- 
2.53.0