Archive-only list for patches
 help / color / mirror / Atom feed
From: Daniel Vetter <daniel@ffwll.ch>
To: Alain Volmat <alain.volmat@foss.st.com>
Cc: Randy Dunlap <rdunlap@infradead.org>,
	dri-devel@lists.freedesktop.org, patches@lists.linux.dev,
	Aditya Srivastava <yashsri421@gmail.com>,
	Benjamin Gaignard <benjamin.gaignard@linaro.org>,
	David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>
Subject: Re: [PATCH] drm: sti: don't use kernel-doc markers
Date: Mon, 28 Mar 2022 16:26:39 +0200	[thread overview]
Message-ID: <YkHFn0UG9FjGeowF@phenom.ffwll.local> (raw)
In-Reply-To: <20220328102116.GA2406908@gnbcxd0016.gnb.st.com>

On Mon, Mar 28, 2022 at 12:21:16PM +0200, Alain Volmat wrote:
> Hi Randy,
> 
> thanks for the patch.
> 
> Acked-by: Alain Volmat <alain.volmat@foss.st.com>

Will Philippe apply this one?

Just trying to make sure this wont be lost, just acking isn't enough :-)
-Daniel

> 
> Alain
> 
> On Sat, Mar 26, 2022 at 04:51:32PM -0700, Randy Dunlap wrote:
> > Don't mark static functions as kernel-doc.
> > 
> > Prevents multiple kernel-doc build warnings:
> > 
> > drivers/gpu/drm/sti/sti_hdmi.c:187: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
> >  * HDMI interrupt handler threaded
> > drivers/gpu/drm/sti/sti_hdmi.c:219: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
> >  * HDMI interrupt handler
> > drivers/gpu/drm/sti/sti_hdmi.c:241: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
> >  * Set hdmi active area depending on the drm display mode selected
> > drivers/gpu/drm/sti/sti_hdmi.c:262: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
> >  * Overall hdmi configuration
> > drivers/gpu/drm/sti/sti_hdmi.c:340: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
> >  * Helper to concatenate infoframe in 32 bits word
> > drivers/gpu/drm/sti/sti_hdmi.c:357: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
> >  * Helper to write info frame
> > drivers/gpu/drm/sti/sti_hdmi.c:427: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
> >  * Prepare and configure the AVI infoframe
> > drivers/gpu/drm/sti/sti_hdmi.c:470: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
> >  * Prepare and configure the AUDIO infoframe
> > drivers/gpu/drm/sti/sti_hdmi.c:555: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
> >  * Software reset of the hdmi subsystem
> > 
> > Fixes: 5402626c83a2 ("drm: sti: add HDMI driver")
> > Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> > Cc: Aditya Srivastava <yashsri421@gmail.com>
> > Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
> > Cc: Alain Volmat <alain.volmat@foss.st.com>
> > Cc: David Airlie <airlied@linux.ie>
> > Cc: Daniel Vetter <daniel@ffwll.ch>
> > ---
> >  drivers/gpu/drm/sti/sti_hdmi.c |   20 ++++++++++----------
> >  1 file changed, 10 insertions(+), 10 deletions(-)
> > 
> > --- linux-next-20220325.orig/drivers/gpu/drm/sti/sti_hdmi.c
> > +++ linux-next-20220325/drivers/gpu/drm/sti/sti_hdmi.c
> > @@ -183,7 +183,7 @@ void hdmi_write(struct sti_hdmi *hdmi, u
> >  	writel(val, hdmi->regs + offset);
> >  }
> >  
> > -/**
> > +/*
> >   * HDMI interrupt handler threaded
> >   *
> >   * @irq: irq number
> > @@ -215,7 +215,7 @@ static irqreturn_t hdmi_irq_thread(int i
> >  	return IRQ_HANDLED;
> >  }
> >  
> > -/**
> > +/*
> >   * HDMI interrupt handler
> >   *
> >   * @irq: irq number
> > @@ -237,7 +237,7 @@ static irqreturn_t hdmi_irq(int irq, voi
> >  	return IRQ_WAKE_THREAD;
> >  }
> >  
> > -/**
> > +/*
> >   * Set hdmi active area depending on the drm display mode selected
> >   *
> >   * @hdmi: pointer on the hdmi internal structure
> > @@ -258,7 +258,7 @@ static void hdmi_active_area(struct sti_
> >  	hdmi_write(hdmi, ymax, HDMI_ACTIVE_VID_YMAX);
> >  }
> >  
> > -/**
> > +/*
> >   * Overall hdmi configuration
> >   *
> >   * @hdmi: pointer on the hdmi internal structure
> > @@ -336,7 +336,7 @@ static void hdmi_infoframe_reset(struct
> >  		hdmi_write(hdmi, 0x0, pack_offset + i);
> >  }
> >  
> > -/**
> > +/*
> >   * Helper to concatenate infoframe in 32 bits word
> >   *
> >   * @ptr: pointer on the hdmi internal structure
> > @@ -353,7 +353,7 @@ static inline unsigned int hdmi_infofram
> >  	return value;
> >  }
> >  
> > -/**
> > +/*
> >   * Helper to write info frame
> >   *
> >   * @hdmi: pointer on the hdmi internal structure
> > @@ -423,7 +423,7 @@ static void hdmi_infoframe_write_infopac
> >  	hdmi_write(hdmi, val, HDMI_SW_DI_CFG);
> >  }
> >  
> > -/**
> > +/*
> >   * Prepare and configure the AVI infoframe
> >   *
> >   * AVI infoframe are transmitted at least once per two video field and
> > @@ -466,7 +466,7 @@ static int hdmi_avi_infoframe_config(str
> >  	return 0;
> >  }
> >  
> > -/**
> > +/*
> >   * Prepare and configure the AUDIO infoframe
> >   *
> >   * AUDIO infoframe are transmitted once per frame and
> > @@ -551,7 +551,7 @@ static int hdmi_vendor_infoframe_config(
> >  
> >  #define HDMI_TIMEOUT_SWRESET  100   /*milliseconds */
> >  
> > -/**
> > +/*
> >   * Software reset of the hdmi subsystem
> >   *
> >   * @hdmi: pointer on the hdmi internal structure
> > @@ -785,7 +785,7 @@ static void sti_hdmi_disable(struct drm_
> >  	cec_notifier_set_phys_addr(hdmi->notifier, CEC_PHYS_ADDR_INVALID);
> >  }
> >  
> > -/**
> > +/*
> >   * sti_hdmi_audio_get_non_coherent_n() - get N parameter for non-coherent
> >   * clocks. None-coherent clocks means that audio and TMDS clocks have not the
> >   * same source (drifts between clocks). In this case assumption is that CTS is

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch

  reply	other threads:[~2022-03-28 14:26 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-26 23:51 [PATCH] drm: sti: don't use kernel-doc markers Randy Dunlap
2022-03-28 10:21 ` Alain Volmat
2022-03-28 14:26   ` Daniel Vetter [this message]
2022-03-31 16:58     ` Philippe CORNU
2022-04-07  9:00       ` Philippe CORNU

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YkHFn0UG9FjGeowF@phenom.ffwll.local \
    --to=daniel@ffwll.ch \
    --cc=airlied@linux.ie \
    --cc=alain.volmat@foss.st.com \
    --cc=benjamin.gaignard@linaro.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=patches@lists.linux.dev \
    --cc=rdunlap@infradead.org \
    --cc=yashsri421@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox