[PATCH] PCI: Move device_del() from pci_stop_dev() to pci_destroy

linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed

* [PATCH] PCI: Move device_del() from pci_stop_dev() to pci_destroy_dev()
       [not found]   ` <20131123230701.GA6183@kroah.com>
@ 2013-11-24  0:17     ` Rafael J. Wysocki
  2013-11-25  4:54       ` Yinghai Lu
                         ` (2 more replies)
  0 siblings, 3 replies; 17+ messages in thread
From: Rafael J. Wysocki @ 2013-11-24  0:17 UTC (permalink / raw)
  To: Bjorn Helgaas
  Cc: Greg Kroah-Hartman, Tejun Heo, Mika Westerberg,
	linux-kernel@vger.kernel.org, Linux PCI

From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

After commit bcdde7e221a8 (sysfs: make __sysfs_remove_dir() recursive)
I'm seeing traces analogous to the one below in Thunderbolt testing:

WARNING: CPU: 3 PID: 76 at /scratch/rafael/work/linux-pm/fs/sysfs/group.c:214 sysfs_remove_group+0x59/0xe0()
 sysfs group ffffffff81c6c500 not found for kobject '0000:08'
 Modules linked in: fuse hidp af_packet xt_tcpudp xt_pkttype xt_LOG xt_limit ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_raw ipt_REJECT iptable_raw xt_CT iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_broadcast nf_conntrack_ipv4 nf_defrag_ipv4 ip_tables xt_conntrack nf_conntrack rfcomm ip6table_filter bnep ip6_tables x_tables arc4 ath9k mac80211 x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul iTCO_wdt crc32c_intel iTCO_vendor_support ghash_clmulni_intel aesni_intel ablk_helper acer_wmi sparse_keymap ath9k_common ath9k_hw cryptd lrw gf128mul ath3k glue_helper aes_x86_64 btusb microcode ath pcspkr joydev uvcvideo serio_raw videobuf2_core i2c_i801 videodev snd_hda_codec_hdmi cfg80211 videobuf2_vmalloc tg3 videobuf2_memops sg ptp pps_core lpc_ich mfd_core snd_hda_codec_realtek bluetooth hid_logitech_dj rfkill snd_hda_intel snd_hda_codec shpchp battery ac wmi acpi_cpufreq edd snd_usb_audio snd_pcm snd_page_alloc snd_hwdep snd_usbmidi_lib 
snd_rawmidi snd_seq snd_timer snd_seq_device snd soundcore autofs4 xhci_hcd processor scsi_dh_hp_sw scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_dh
 CPU: 3 PID: 76 Comm: kworker/u16:7 Not tainted 3.13.0-rc1+ #76
 Hardware name: Acer Aspire S5-391/Venus    , BIOS V1.02 05/29/2012
 Workqueue: kacpi_hotplug acpi_hotplug_work_fn
  0000000000000009 ffff8801644b9ac8 ffffffff816b23bf 0000000000000007
  ffff8801644b9b18 ffff8801644b9b08 ffffffff81046607 ffff88016925b800
  0000000000000000 ffffffff81c6c500 ffff88016924f928 ffff88016924f800
 Call Trace:
  [<ffffffff816b23bf>] dump_stack+0x4e/0x71
  [<ffffffff81046607>] warn_slowpath_common+0x87/0xb0
  [<ffffffff810466d1>] warn_slowpath_fmt+0x41/0x50
  [<ffffffff811e42ef>] ? sysfs_get_dirent_ns+0x6f/0x80
  [<ffffffff811e5389>] sysfs_remove_group+0x59/0xe0
  [<ffffffff8149f00b>] dpm_sysfs_remove+0x3b/0x50
  [<ffffffff81495818>] device_del+0x58/0x1c0
  [<ffffffff814959c8>] device_unregister+0x48/0x60
  [<ffffffff813254fe>] pci_remove_bus+0x6e/0x80
  [<ffffffff81325548>] pci_remove_bus_device+0x38/0x110
  [<ffffffff8132555d>] pci_remove_bus_device+0x4d/0x110
  [<ffffffff81325639>] pci_stop_and_remove_bus_device+0x19/0x20
  [<ffffffff813418d0>] disable_slot+0x20/0xe0
  [<ffffffff81341a38>] acpiphp_check_bridge+0xa8/0xd0
  [<ffffffff813427ad>] hotplug_event+0x17d/0x220
  [<ffffffff81342880>] hotplug_event_work+0x30/0x70
  [<ffffffff8136d665>] acpi_hotplug_work_fn+0x18/0x24
  [<ffffffff81061331>] process_one_work+0x261/0x450
  [<ffffffff81061a7e>] worker_thread+0x21e/0x370
  [<ffffffff81061860>] ? rescuer_thread+0x300/0x300
  [<ffffffff81068342>] kthread+0xd2/0xe0
  [<ffffffff81068270>] ? flush_kthread_worker+0x70/0x70
  [<ffffffff816c19bc>] ret_from_fork+0x7c/0xb0
  [<ffffffff81068270>] ? flush_kthread_worker+0x70/0x70

(Mika Westerberg sees them too in his tests).

Some investigation documented in kernel bug #65281 lead me to the
conclusion that the source of the problem is the device_del() in
pci_stop_dev() as it now causes the sysfs directory of the device
to be removed recursively along with all of its subdirectories.
That includes the sysfs directory of the device's subordinate
bus (dev->subordinate) and its "power" group.

Consequently, when pci_remove_bus() is called for dev->subordinate
in pci_remove_bus_device(), it calls device_unregister(&bus->dev),
but at this point the sysfs directory of bus->dev doesn't exist any
more and its "power" group doesn't exist either.  Thus, when
dpm_sysfs_remove() called from device_del() tries to remove that
group, it triggers the above warning.

That indicates a logical mistake in the design of
pci_stop_and_remove_bus_device(), which causes bus device objects
to be left behind their parents (bridge device objects) and can be
fixed by moving the device_del() from pci_stop_dev() into
pci_destroy_dev(), so pci_remove_bus() can be called for the
device's subordinate bus before the device itself is unregistered
from the hierarchy.  Still, the driver, if any, should be detached
from the device in pci_stop_dev(), so use device_release_driver()
directly from there.

References: https://bugzilla.kernel.org/show_bug.cgi?id=65281#c6
Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
 drivers/pci/remove.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

Index: linux-pm/drivers/pci/remove.c
===================================================================
--- linux-pm.orig/drivers/pci/remove.c
+++ linux-pm/drivers/pci/remove.c
@@ -24,7 +24,7 @@ static void pci_stop_dev(struct pci_dev
 	if (dev->is_added) {
 		pci_proc_detach_device(dev);
 		pci_remove_sysfs_dev_files(dev);
-		device_del(&dev->dev);
+		device_release_driver(&dev->dev);
 		dev->is_added = 0;
 	}

@@ -34,6 +34,8 @@ static void pci_stop_dev(struct pci_dev

 static void pci_destroy_dev(struct pci_dev *dev)
 {
+	device_del(&dev->dev);
+
 	down_write(&pci_bus_sem);
 	list_del(&dev->bus_list);
 	up_write(&pci_bus_sem);

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH] PCI: Move device_del() from pci_stop_dev() to pci_destroy_dev()
  2013-11-24  0:17     ` [PATCH] PCI: Move device_del() from pci_stop_dev() to pci_destroy_dev() Rafael J. Wysocki
@ 2013-11-25  4:54       ` Yinghai Lu
  2013-11-25  4:58         ` Yinghai Lu
  2013-11-25 11:22         ` Rafael J. Wysocki
  2013-11-25  9:47       ` Mika Westerberg
  2013-11-25 21:59       ` Bjorn Helgaas
  2 siblings, 2 replies; 17+ messages in thread
From: Yinghai Lu @ 2013-11-25  4:54 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: Bjorn Helgaas, Greg Kroah-Hartman, Tejun Heo, Mika Westerberg,
	linux-kernel@vger.kernel.org, Linux PCI

On Sat, Nov 23, 2013 at 4:17 PM, Rafael J. Wysocki <rjw@rjwysocki.net> wrote:
> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>
> After commit bcdde7e221a8 (sysfs: make __sysfs_remove_dir() recursive)
> I'm seeing traces analogous to the one below in Thunderbolt testing:
>
> WARNING: CPU: 3 PID: 76 at /scratch/rafael/work/linux-pm/fs/sysfs/group.c:214 sysfs_remove_group+0x59/0xe0()
>  sysfs group ffffffff81c6c500 not found for kobject '0000:08'
>  Modules linked in: fuse hidp af_packet xt_tcpudp xt_pkttype xt_LOG xt_limit ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_raw ipt_REJECT iptable_raw xt_CT iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_broadcast nf_conntrack_ipv4 nf_defrag_ipv4 ip_tables xt_conntrack nf_conntrack rfcomm ip6table_filter bnep ip6_tables x_tables arc4 ath9k mac80211 x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul iTCO_wdt crc32c_intel iTCO_vendor_support ghash_clmulni_intel aesni_intel ablk_helper acer_wmi sparse_keymap ath9k_common ath9k_hw cryptd lrw gf128mul ath3k glue_helper aes_x86_64 btusb microcode ath pcspkr joydev uvcvideo serio_raw videobuf2_core i2c_i801 videodev snd_hda_codec_hdmi cfg80211 videobuf2_vmalloc tg3 videobuf2_memops sg ptp pps_core lpc_ich mfd_core snd_hda_codec_realtek bluetooth hid_logitech_dj rfkill snd_hda_intel snd_hda_codec shpchp battery ac wmi acpi_cpufreq edd snd_usb_audio snd_pcm snd_page_alloc snd_hwdep snd_usbmidi_lib
> snd_rawmidi snd_seq snd_timer snd_seq_device snd soundcore autofs4 xhci_hcd processor scsi_dh_hp_sw scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_dh
>  CPU: 3 PID: 76 Comm: kworker/u16:7 Not tainted 3.13.0-rc1+ #76
>  Hardware name: Acer Aspire S5-391/Venus    , BIOS V1.02 05/29/2012
>  Workqueue: kacpi_hotplug acpi_hotplug_work_fn
>   0000000000000009 ffff8801644b9ac8 ffffffff816b23bf 0000000000000007
>   ffff8801644b9b18 ffff8801644b9b08 ffffffff81046607 ffff88016925b800
>   0000000000000000 ffffffff81c6c500 ffff88016924f928 ffff88016924f800
>  Call Trace:
>   [<ffffffff816b23bf>] dump_stack+0x4e/0x71
>   [<ffffffff81046607>] warn_slowpath_common+0x87/0xb0
>   [<ffffffff810466d1>] warn_slowpath_fmt+0x41/0x50
>   [<ffffffff811e42ef>] ? sysfs_get_dirent_ns+0x6f/0x80
>   [<ffffffff811e5389>] sysfs_remove_group+0x59/0xe0
>   [<ffffffff8149f00b>] dpm_sysfs_remove+0x3b/0x50
>   [<ffffffff81495818>] device_del+0x58/0x1c0
>   [<ffffffff814959c8>] device_unregister+0x48/0x60
>   [<ffffffff813254fe>] pci_remove_bus+0x6e/0x80
>   [<ffffffff81325548>] pci_remove_bus_device+0x38/0x110
>   [<ffffffff8132555d>] pci_remove_bus_device+0x4d/0x110
>   [<ffffffff81325639>] pci_stop_and_remove_bus_device+0x19/0x20
>   [<ffffffff813418d0>] disable_slot+0x20/0xe0
>   [<ffffffff81341a38>] acpiphp_check_bridge+0xa8/0xd0
>   [<ffffffff813427ad>] hotplug_event+0x17d/0x220
>   [<ffffffff81342880>] hotplug_event_work+0x30/0x70
>   [<ffffffff8136d665>] acpi_hotplug_work_fn+0x18/0x24
>   [<ffffffff81061331>] process_one_work+0x261/0x450
>   [<ffffffff81061a7e>] worker_thread+0x21e/0x370
>   [<ffffffff81061860>] ? rescuer_thread+0x300/0x300
>   [<ffffffff81068342>] kthread+0xd2/0xe0
>   [<ffffffff81068270>] ? flush_kthread_worker+0x70/0x70
>   [<ffffffff816c19bc>] ret_from_fork+0x7c/0xb0
>   [<ffffffff81068270>] ? flush_kthread_worker+0x70/0x70
>
> (Mika Westerberg sees them too in his tests).
>
> Some investigation documented in kernel bug #65281 lead me to the
> conclusion that the source of the problem is the device_del() in
> pci_stop_dev() as it now causes the sysfs directory of the device
> to be removed recursively along with all of its subdirectories.
> That includes the sysfs directory of the device's subordinate
> bus (dev->subordinate) and its "power" group.
>
> Consequently, when pci_remove_bus() is called for dev->subordinate
> in pci_remove_bus_device(), it calls device_unregister(&bus->dev),
> but at this point the sysfs directory of bus->dev doesn't exist any
> more and its "power" group doesn't exist either.  Thus, when
> dpm_sysfs_remove() called from device_del() tries to remove that
> group, it triggers the above warning.
>
> That indicates a logical mistake in the design of
> pci_stop_and_remove_bus_device(), which causes bus device objects
> to be left behind their parents (bridge device objects) and can be
> fixed by moving the device_del() from pci_stop_dev() into
> pci_destroy_dev(), so pci_remove_bus() can be called for the
> device's subordinate bus before the device itself is unregistered
> from the hierarchy.  Still, the driver, if any, should be detached
> from the device in pci_stop_dev(), so use device_release_driver()
> directly from there.
>
> References: https://bugzilla.kernel.org/show_bug.cgi?id=65281#c6
> Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> ---
>  drivers/pci/remove.c |    4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
>
> Index: linux-pm/drivers/pci/remove.c
> ===================================================================
> --- linux-pm.orig/drivers/pci/remove.c
> +++ linux-pm/drivers/pci/remove.c
> @@ -24,7 +24,7 @@ static void pci_stop_dev(struct pci_dev
>         if (dev->is_added) {
>                 pci_proc_detach_device(dev);
>                 pci_remove_sysfs_dev_files(dev);
> -               device_del(&dev->dev);
> +               device_release_driver(&dev->dev);
>                 dev->is_added = 0;
>         }
>
> @@ -34,6 +34,8 @@ static void pci_stop_dev(struct pci_dev
>
>  static void pci_destroy_dev(struct pci_dev *dev)
>  {
> +       device_del(&dev->dev);
> +
>         down_write(&pci_bus_sem);
>         list_del(&dev->bus_list);
>         up_write(&pci_bus_sem);
>

Maybe that is not enough. could still need add is_removed ...

Please check

https://lkml.org/lkml/2013/5/13/653
PATCH 3/7] PCI: Detach driver in pci_stop_device

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH] PCI: Move device_del() from pci_stop_dev() to pci_destroy_dev()
  2013-11-25  4:54       ` Yinghai Lu
@ 2013-11-25  4:58         ` Yinghai Lu
  2013-11-25 11:23           ` Rafael J. Wysocki
  2013-11-25 11:22         ` Rafael J. Wysocki
  1 sibling, 1 reply; 17+ messages in thread
From: Yinghai Lu @ 2013-11-25  4:58 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: Bjorn Helgaas, Greg Kroah-Hartman, Tejun Heo, Mika Westerberg,
	linux-kernel@vger.kernel.org, Linux PCI

On Sun, Nov 24, 2013 at 8:54 PM, Yinghai Lu <yinghai@kernel.org> wrote:
> On Sat, Nov 23, 2013 at 4:17 PM, Rafael J. Wysocki <rjw@rjwysocki.net> wrote:
>> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>>
>> After commit bcdde7e221a8 (sysfs: make __sysfs_remove_dir() recursive)
>> I'm seeing traces analogous to the one below in Thunderbolt testing:
>>
>> WARNING: CPU: 3 PID: 76 at /scratch/rafael/work/linux-pm/fs/sysfs/group.c:214 sysfs_remove_group+0x59/0xe0()
>>  sysfs group ffffffff81c6c500 not found for kobject '0000:08'
>>  Modules linked in: fuse hidp af_packet xt_tcpudp xt_pkttype xt_LOG xt_limit ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_raw ipt_REJECT iptable_raw xt_CT iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_broadcast nf_conntrack_ipv4 nf_defrag_ipv4 ip_tables xt_conntrack nf_conntrack rfcomm ip6table_filter bnep ip6_tables x_tables arc4 ath9k mac80211 x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul iTCO_wdt crc32c_intel iTCO_vendor_support ghash_clmulni_intel aesni_intel ablk_helper acer_wmi sparse_keymap ath9k_common ath9k_hw cryptd lrw gf128mul ath3k glue_helper aes_x86_64 btusb microcode ath pcspkr joydev uvcvideo serio_raw videobuf2_core i2c_i801 videodev snd_hda_codec_hdmi cfg80211 videobuf2_vmalloc tg3 videobuf2_memops sg ptp pps_core lpc_ich mfd_core snd_hda_codec_realtek bluetooth hid_logitech_dj rfkill snd_hda_intel snd_hda_codec shpchp battery ac wmi acpi_cpufreq edd snd_usb_audio snd_pcm snd_page_alloc snd_hwdep snd_usbmidi_lib
>> snd_rawmidi snd_seq snd_timer snd_seq_device snd soundcore autofs4 xhci_hcd processor scsi_dh_hp_sw scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_dh
>>  CPU: 3 PID: 76 Comm: kworker/u16:7 Not tainted 3.13.0-rc1+ #76
>>  Hardware name: Acer Aspire S5-391/Venus    , BIOS V1.02 05/29/2012
>>  Workqueue: kacpi_hotplug acpi_hotplug_work_fn
>>   0000000000000009 ffff8801644b9ac8 ffffffff816b23bf 0000000000000007
>>   ffff8801644b9b18 ffff8801644b9b08 ffffffff81046607 ffff88016925b800
>>   0000000000000000 ffffffff81c6c500 ffff88016924f928 ffff88016924f800
>>  Call Trace:
>>   [<ffffffff816b23bf>] dump_stack+0x4e/0x71
>>   [<ffffffff81046607>] warn_slowpath_common+0x87/0xb0
>>   [<ffffffff810466d1>] warn_slowpath_fmt+0x41/0x50
>>   [<ffffffff811e42ef>] ? sysfs_get_dirent_ns+0x6f/0x80
>>   [<ffffffff811e5389>] sysfs_remove_group+0x59/0xe0
>>   [<ffffffff8149f00b>] dpm_sysfs_remove+0x3b/0x50
>>   [<ffffffff81495818>] device_del+0x58/0x1c0
>>   [<ffffffff814959c8>] device_unregister+0x48/0x60
>>   [<ffffffff813254fe>] pci_remove_bus+0x6e/0x80
>>   [<ffffffff81325548>] pci_remove_bus_device+0x38/0x110
>>   [<ffffffff8132555d>] pci_remove_bus_device+0x4d/0x110
>>   [<ffffffff81325639>] pci_stop_and_remove_bus_device+0x19/0x20
>>   [<ffffffff813418d0>] disable_slot+0x20/0xe0
>>   [<ffffffff81341a38>] acpiphp_check_bridge+0xa8/0xd0
>>   [<ffffffff813427ad>] hotplug_event+0x17d/0x220
>>   [<ffffffff81342880>] hotplug_event_work+0x30/0x70
>>   [<ffffffff8136d665>] acpi_hotplug_work_fn+0x18/0x24
>>   [<ffffffff81061331>] process_one_work+0x261/0x450
>>   [<ffffffff81061a7e>] worker_thread+0x21e/0x370
>>   [<ffffffff81061860>] ? rescuer_thread+0x300/0x300
>>   [<ffffffff81068342>] kthread+0xd2/0xe0
>>   [<ffffffff81068270>] ? flush_kthread_worker+0x70/0x70
>>   [<ffffffff816c19bc>] ret_from_fork+0x7c/0xb0
>>   [<ffffffff81068270>] ? flush_kthread_worker+0x70/0x70
>>
>> (Mika Westerberg sees them too in his tests).
>>
>> Some investigation documented in kernel bug #65281 lead me to the
>> conclusion that the source of the problem is the device_del() in
>> pci_stop_dev() as it now causes the sysfs directory of the device
>> to be removed recursively along with all of its subdirectories.
>> That includes the sysfs directory of the device's subordinate
>> bus (dev->subordinate) and its "power" group.
>>
>> Consequently, when pci_remove_bus() is called for dev->subordinate
>> in pci_remove_bus_device(), it calls device_unregister(&bus->dev),
>> but at this point the sysfs directory of bus->dev doesn't exist any
>> more and its "power" group doesn't exist either.  Thus, when
>> dpm_sysfs_remove() called from device_del() tries to remove that
>> group, it triggers the above warning.
>>
>> That indicates a logical mistake in the design of
>> pci_stop_and_remove_bus_device(), which causes bus device objects
>> to be left behind their parents (bridge device objects) and can be
>> fixed by moving the device_del() from pci_stop_dev() into
>> pci_destroy_dev(), so pci_remove_bus() can be called for the
>> device's subordinate bus before the device itself is unregistered
>> from the hierarchy.  Still, the driver, if any, should be detached
>> from the device in pci_stop_dev(), so use device_release_driver()
>> directly from there.
>>
>> References: https://bugzilla.kernel.org/show_bug.cgi?id=65281#c6
>> Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
>> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>> ---
>>  drivers/pci/remove.c |    4 +++-
>>  1 file changed, 3 insertions(+), 1 deletion(-)
>>
>> Index: linux-pm/drivers/pci/remove.c
>> ===================================================================
>> --- linux-pm.orig/drivers/pci/remove.c
>> +++ linux-pm/drivers/pci/remove.c
>> @@ -24,7 +24,7 @@ static void pci_stop_dev(struct pci_dev
>>         if (dev->is_added) {
>>                 pci_proc_detach_device(dev);
>>                 pci_remove_sysfs_dev_files(dev);
>> -               device_del(&dev->dev);
>> +               device_release_driver(&dev->dev);
>>                 dev->is_added = 0;
>>         }
>>
>> @@ -34,6 +34,8 @@ static void pci_stop_dev(struct pci_dev
>>
>>  static void pci_destroy_dev(struct pci_dev *dev)
>>  {
>> +       device_del(&dev->dev);
>> +
>>         down_write(&pci_bus_sem);
>>         list_del(&dev->bus_list);
>>         up_write(&pci_bus_sem);
>>
>
> Maybe that is not enough. could still need add is_removed ...
>
> Please check
>
> https://lkml.org/lkml/2013/5/13/653
> PATCH 3/7] PCI: Detach driver in pci_stop_device

or you can check if
http://patchwork.ozlabs.org/patch/292622/
  [1/6] PCI: move back pci_proc_attach_devices calling
http://patchwork.ozlabs.org/patch/292623/
  [2/6] PCI: move resources and bus_list releasing to pci_release_dev
http://patchwork.ozlabs.org/patch/292624/
  [3/6] PCI: Destroy pci dev only once

could help with you test setup.

Thanks

Yinghai

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH] PCI: Move device_del() from pci_stop_dev() to pci_destroy_dev()
  2013-11-25  4:58         ` Yinghai Lu
@ 2013-11-25 11:23           ` Rafael J. Wysocki
  2013-11-25 19:48             ` Yinghai Lu
  0 siblings, 1 reply; 17+ messages in thread
From: Rafael J. Wysocki @ 2013-11-25 11:23 UTC (permalink / raw)
  To: Yinghai Lu
  Cc: Bjorn Helgaas, Greg Kroah-Hartman, Tejun Heo, Mika Westerberg,
	linux-kernel@vger.kernel.org, Linux PCI

On Sunday, November 24, 2013 08:58:12 PM Yinghai Lu wrote:
> On Sun, Nov 24, 2013 at 8:54 PM, Yinghai Lu <yinghai@kernel.org> wrote:
> > On Sat, Nov 23, 2013 at 4:17 PM, Rafael J. Wysocki <rjw@rjwysocki.net> wrote:
> >> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> >>
> >> After commit bcdde7e221a8 (sysfs: make __sysfs_remove_dir() recursive)
> >> I'm seeing traces analogous to the one below in Thunderbolt testing:
> >>
> >> WARNING: CPU: 3 PID: 76 at /scratch/rafael/work/linux-pm/fs/sysfs/group.c:214 sysfs_remove_group+0x59/0xe0()
> >>  sysfs group ffffffff81c6c500 not found for kobject '0000:08'
> >>  Modules linked in: fuse hidp af_packet xt_tcpudp xt_pkttype xt_LOG xt_limit ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_raw ipt_REJECT iptable_raw xt_CT iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_broadcast nf_conntrack_ipv4 nf_defrag_ipv4 ip_tables xt_conntrack nf_conntrack rfcomm ip6table_filter bnep ip6_tables x_tables arc4 ath9k mac80211 x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul iTCO_wdt crc32c_intel iTCO_vendor_support ghash_clmulni_intel aesni_intel ablk_helper acer_wmi sparse_keymap ath9k_common ath9k_hw cryptd lrw gf128mul ath3k glue_helper aes_x86_64 btusb microcode ath pcspkr joydev uvcvideo serio_raw videobuf2_core i2c_i801 videodev snd_hda_codec_hdmi cfg80211 videobuf2_vmalloc tg3 videobuf2_memops sg ptp pps_core lpc_ich mfd_core snd_hda_codec_realtek bluetooth hid_logitech_dj rfkill snd_hda_intel snd_hda_codec shpchp battery ac wmi acpi_cpufreq edd snd_usb_audio snd_pcm snd_page_alloc snd_hwdep snd_usbmidi_lib
> >> snd_rawmidi snd_seq snd_timer snd_seq_device snd soundcore autofs4 xhci_hcd processor scsi_dh_hp_sw scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_dh
> >>  CPU: 3 PID: 76 Comm: kworker/u16:7 Not tainted 3.13.0-rc1+ #76
> >>  Hardware name: Acer Aspire S5-391/Venus    , BIOS V1.02 05/29/2012
> >>  Workqueue: kacpi_hotplug acpi_hotplug_work_fn
> >>   0000000000000009 ffff8801644b9ac8 ffffffff816b23bf 0000000000000007
> >>   ffff8801644b9b18 ffff8801644b9b08 ffffffff81046607 ffff88016925b800
> >>   0000000000000000 ffffffff81c6c500 ffff88016924f928 ffff88016924f800
> >>  Call Trace:
> >>   [<ffffffff816b23bf>] dump_stack+0x4e/0x71
> >>   [<ffffffff81046607>] warn_slowpath_common+0x87/0xb0
> >>   [<ffffffff810466d1>] warn_slowpath_fmt+0x41/0x50
> >>   [<ffffffff811e42ef>] ? sysfs_get_dirent_ns+0x6f/0x80
> >>   [<ffffffff811e5389>] sysfs_remove_group+0x59/0xe0
> >>   [<ffffffff8149f00b>] dpm_sysfs_remove+0x3b/0x50
> >>   [<ffffffff81495818>] device_del+0x58/0x1c0
> >>   [<ffffffff814959c8>] device_unregister+0x48/0x60
> >>   [<ffffffff813254fe>] pci_remove_bus+0x6e/0x80
> >>   [<ffffffff81325548>] pci_remove_bus_device+0x38/0x110
> >>   [<ffffffff8132555d>] pci_remove_bus_device+0x4d/0x110
> >>   [<ffffffff81325639>] pci_stop_and_remove_bus_device+0x19/0x20
> >>   [<ffffffff813418d0>] disable_slot+0x20/0xe0
> >>   [<ffffffff81341a38>] acpiphp_check_bridge+0xa8/0xd0
> >>   [<ffffffff813427ad>] hotplug_event+0x17d/0x220
> >>   [<ffffffff81342880>] hotplug_event_work+0x30/0x70
> >>   [<ffffffff8136d665>] acpi_hotplug_work_fn+0x18/0x24
> >>   [<ffffffff81061331>] process_one_work+0x261/0x450
> >>   [<ffffffff81061a7e>] worker_thread+0x21e/0x370
> >>   [<ffffffff81061860>] ? rescuer_thread+0x300/0x300
> >>   [<ffffffff81068342>] kthread+0xd2/0xe0
> >>   [<ffffffff81068270>] ? flush_kthread_worker+0x70/0x70
> >>   [<ffffffff816c19bc>] ret_from_fork+0x7c/0xb0
> >>   [<ffffffff81068270>] ? flush_kthread_worker+0x70/0x70
> >>
> >> (Mika Westerberg sees them too in his tests).
> >>
> >> Some investigation documented in kernel bug #65281 lead me to the
> >> conclusion that the source of the problem is the device_del() in
> >> pci_stop_dev() as it now causes the sysfs directory of the device
> >> to be removed recursively along with all of its subdirectories.
> >> That includes the sysfs directory of the device's subordinate
> >> bus (dev->subordinate) and its "power" group.
> >>
> >> Consequently, when pci_remove_bus() is called for dev->subordinate
> >> in pci_remove_bus_device(), it calls device_unregister(&bus->dev),
> >> but at this point the sysfs directory of bus->dev doesn't exist any
> >> more and its "power" group doesn't exist either.  Thus, when
> >> dpm_sysfs_remove() called from device_del() tries to remove that
> >> group, it triggers the above warning.
> >>
> >> That indicates a logical mistake in the design of
> >> pci_stop_and_remove_bus_device(), which causes bus device objects
> >> to be left behind their parents (bridge device objects) and can be
> >> fixed by moving the device_del() from pci_stop_dev() into
> >> pci_destroy_dev(), so pci_remove_bus() can be called for the
> >> device's subordinate bus before the device itself is unregistered
> >> from the hierarchy.  Still, the driver, if any, should be detached
> >> from the device in pci_stop_dev(), so use device_release_driver()
> >> directly from there.
> >>
> >> References: https://bugzilla.kernel.org/show_bug.cgi?id=65281#c6
> >> Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
> >> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> >> ---
> >>  drivers/pci/remove.c |    4 +++-
> >>  1 file changed, 3 insertions(+), 1 deletion(-)
> >>
> >> Index: linux-pm/drivers/pci/remove.c
> >> ===================================================================
> >> --- linux-pm.orig/drivers/pci/remove.c
> >> +++ linux-pm/drivers/pci/remove.c
> >> @@ -24,7 +24,7 @@ static void pci_stop_dev(struct pci_dev
> >>         if (dev->is_added) {
> >>                 pci_proc_detach_device(dev);
> >>                 pci_remove_sysfs_dev_files(dev);
> >> -               device_del(&dev->dev);
> >> +               device_release_driver(&dev->dev);
> >>                 dev->is_added = 0;
> >>         }
> >>
> >> @@ -34,6 +34,8 @@ static void pci_stop_dev(struct pci_dev
> >>
> >>  static void pci_destroy_dev(struct pci_dev *dev)
> >>  {
> >> +       device_del(&dev->dev);
> >> +
> >>         down_write(&pci_bus_sem);
> >>         list_del(&dev->bus_list);
> >>         up_write(&pci_bus_sem);
> >>
> >
> > Maybe that is not enough. could still need add is_removed ...
> >
> > Please check
> >
> > https://lkml.org/lkml/2013/5/13/653
> > PATCH 3/7] PCI: Detach driver in pci_stop_device
> 
> or you can check if
> http://patchwork.ozlabs.org/patch/292622/
>   [1/6] PCI: move back pci_proc_attach_devices calling
> http://patchwork.ozlabs.org/patch/292623/
>   [2/6] PCI: move resources and bus_list releasing to pci_release_dev
> http://patchwork.ozlabs.org/patch/292624/
>   [3/6] PCI: Destroy pci dev only once
> 
> could help with you test setup.

I honestly don't think that all of the additional changes are needed to fix
this particular problem.

Thanks!

-- 
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH] PCI: Move device_del() from pci_stop_dev() to pci_destroy_dev()
  2013-11-25 11:23           ` Rafael J. Wysocki
@ 2013-11-25 19:48             ` Yinghai Lu
  0 siblings, 0 replies; 17+ messages in thread
From: Yinghai Lu @ 2013-11-25 19:48 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: Bjorn Helgaas, Greg Kroah-Hartman, Tejun Heo, Mika Westerberg,
	linux-kernel@vger.kernel.org, Linux PCI

On Mon, Nov 25, 2013 at 3:23 AM, Rafael J. Wysocki <rjw@rjwysocki.net> wrote:
>>
>> or you can check if
>> http://patchwork.ozlabs.org/patch/292622/
>>   [1/6] PCI: move back pci_proc_attach_devices calling
>> http://patchwork.ozlabs.org/patch/292623/
>>   [2/6] PCI: move resources and bus_list releasing to pci_release_dev
>> http://patchwork.ozlabs.org/patch/292624/
>>   [3/6] PCI: Destroy pci dev only once
>>
>> could help with you test setup.
>
> I honestly don't think that all of the additional changes are needed to fix
> this particular problem.

I thought
[3/6] PCI: Destroy pci dev only once
should be enough, but it depend change on other two.

Thanks

Yinghai

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH] PCI: Move device_del() from pci_stop_dev() to pci_destroy_dev()
  2013-11-25  4:54       ` Yinghai Lu
  2013-11-25  4:58         ` Yinghai Lu
@ 2013-11-25 11:22         ` Rafael J. Wysocki
  2013-11-25 19:45           ` Yinghai Lu
  1 sibling, 1 reply; 17+ messages in thread
From: Rafael J. Wysocki @ 2013-11-25 11:22 UTC (permalink / raw)
  To: Yinghai Lu
  Cc: Bjorn Helgaas, Greg Kroah-Hartman, Tejun Heo, Mika Westerberg,
	linux-kernel@vger.kernel.org, Linux PCI

On Sunday, November 24, 2013 08:54:12 PM Yinghai Lu wrote:
> On Sat, Nov 23, 2013 at 4:17 PM, Rafael J. Wysocki <rjw@rjwysocki.net> wrote:
> > From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> >
> > After commit bcdde7e221a8 (sysfs: make __sysfs_remove_dir() recursive)
> > I'm seeing traces analogous to the one below in Thunderbolt testing:
> >
> > WARNING: CPU: 3 PID: 76 at /scratch/rafael/work/linux-pm/fs/sysfs/group.c:214 sysfs_remove_group+0x59/0xe0()
> >  sysfs group ffffffff81c6c500 not found for kobject '0000:08'
> >  Modules linked in: fuse hidp af_packet xt_tcpudp xt_pkttype xt_LOG xt_limit ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_raw ipt_REJECT iptable_raw xt_CT iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_broadcast nf_conntrack_ipv4 nf_defrag_ipv4 ip_tables xt_conntrack nf_conntrack rfcomm ip6table_filter bnep ip6_tables x_tables arc4 ath9k mac80211 x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul iTCO_wdt crc32c_intel iTCO_vendor_support ghash_clmulni_intel aesni_intel ablk_helper acer_wmi sparse_keymap ath9k_common ath9k_hw cryptd lrw gf128mul ath3k glue_helper aes_x86_64 btusb microcode ath pcspkr joydev uvcvideo serio_raw videobuf2_core i2c_i801 videodev snd_hda_codec_hdmi cfg80211 videobuf2_vmalloc tg3 videobuf2_memops sg ptp pps_core lpc_ich mfd_core snd_hda_codec_realtek bluetooth hid_logitech_dj rfkill snd_hda_intel snd_hda_codec shpchp battery ac wmi acpi_cpufreq edd snd_usb_audio snd_pcm snd_page_alloc snd_hwdep snd_usbmidi_lib
> > snd_rawmidi snd_seq snd_timer snd_seq_device snd soundcore autofs4 xhci_hcd processor scsi_dh_hp_sw scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_dh
> >  CPU: 3 PID: 76 Comm: kworker/u16:7 Not tainted 3.13.0-rc1+ #76
> >  Hardware name: Acer Aspire S5-391/Venus    , BIOS V1.02 05/29/2012
> >  Workqueue: kacpi_hotplug acpi_hotplug_work_fn
> >   0000000000000009 ffff8801644b9ac8 ffffffff816b23bf 0000000000000007
> >   ffff8801644b9b18 ffff8801644b9b08 ffffffff81046607 ffff88016925b800
> >   0000000000000000 ffffffff81c6c500 ffff88016924f928 ffff88016924f800
> >  Call Trace:
> >   [<ffffffff816b23bf>] dump_stack+0x4e/0x71
> >   [<ffffffff81046607>] warn_slowpath_common+0x87/0xb0
> >   [<ffffffff810466d1>] warn_slowpath_fmt+0x41/0x50
> >   [<ffffffff811e42ef>] ? sysfs_get_dirent_ns+0x6f/0x80
> >   [<ffffffff811e5389>] sysfs_remove_group+0x59/0xe0
> >   [<ffffffff8149f00b>] dpm_sysfs_remove+0x3b/0x50
> >   [<ffffffff81495818>] device_del+0x58/0x1c0
> >   [<ffffffff814959c8>] device_unregister+0x48/0x60
> >   [<ffffffff813254fe>] pci_remove_bus+0x6e/0x80
> >   [<ffffffff81325548>] pci_remove_bus_device+0x38/0x110
> >   [<ffffffff8132555d>] pci_remove_bus_device+0x4d/0x110
> >   [<ffffffff81325639>] pci_stop_and_remove_bus_device+0x19/0x20
> >   [<ffffffff813418d0>] disable_slot+0x20/0xe0
> >   [<ffffffff81341a38>] acpiphp_check_bridge+0xa8/0xd0
> >   [<ffffffff813427ad>] hotplug_event+0x17d/0x220
> >   [<ffffffff81342880>] hotplug_event_work+0x30/0x70
> >   [<ffffffff8136d665>] acpi_hotplug_work_fn+0x18/0x24
> >   [<ffffffff81061331>] process_one_work+0x261/0x450
> >   [<ffffffff81061a7e>] worker_thread+0x21e/0x370
> >   [<ffffffff81061860>] ? rescuer_thread+0x300/0x300
> >   [<ffffffff81068342>] kthread+0xd2/0xe0
> >   [<ffffffff81068270>] ? flush_kthread_worker+0x70/0x70
> >   [<ffffffff816c19bc>] ret_from_fork+0x7c/0xb0
> >   [<ffffffff81068270>] ? flush_kthread_worker+0x70/0x70
> >
> > (Mika Westerberg sees them too in his tests).
> >
> > Some investigation documented in kernel bug #65281 lead me to the
> > conclusion that the source of the problem is the device_del() in
> > pci_stop_dev() as it now causes the sysfs directory of the device
> > to be removed recursively along with all of its subdirectories.
> > That includes the sysfs directory of the device's subordinate
> > bus (dev->subordinate) and its "power" group.
> >
> > Consequently, when pci_remove_bus() is called for dev->subordinate
> > in pci_remove_bus_device(), it calls device_unregister(&bus->dev),
> > but at this point the sysfs directory of bus->dev doesn't exist any
> > more and its "power" group doesn't exist either.  Thus, when
> > dpm_sysfs_remove() called from device_del() tries to remove that
> > group, it triggers the above warning.
> >
> > That indicates a logical mistake in the design of
> > pci_stop_and_remove_bus_device(), which causes bus device objects
> > to be left behind their parents (bridge device objects) and can be
> > fixed by moving the device_del() from pci_stop_dev() into
> > pci_destroy_dev(), so pci_remove_bus() can be called for the
> > device's subordinate bus before the device itself is unregistered
> > from the hierarchy.  Still, the driver, if any, should be detached
> > from the device in pci_stop_dev(), so use device_release_driver()
> > directly from there.
> >
> > References: https://bugzilla.kernel.org/show_bug.cgi?id=65281#c6
> > Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
> > Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> > ---
> >  drivers/pci/remove.c |    4 +++-
> >  1 file changed, 3 insertions(+), 1 deletion(-)
> >
> > Index: linux-pm/drivers/pci/remove.c
> > ===================================================================
> > --- linux-pm.orig/drivers/pci/remove.c
> > +++ linux-pm/drivers/pci/remove.c
> > @@ -24,7 +24,7 @@ static void pci_stop_dev(struct pci_dev
> >         if (dev->is_added) {
> >                 pci_proc_detach_device(dev);
> >                 pci_remove_sysfs_dev_files(dev);
> > -               device_del(&dev->dev);
> > +               device_release_driver(&dev->dev);
> >                 dev->is_added = 0;
> >         }
> >
> > @@ -34,6 +34,8 @@ static void pci_stop_dev(struct pci_dev
> >
> >  static void pci_destroy_dev(struct pci_dev *dev)
> >  {
> > +       device_del(&dev->dev);
> > +
> >         down_write(&pci_bus_sem);
> >         list_del(&dev->bus_list);
> >         up_write(&pci_bus_sem);
> >
> 
> Maybe that is not enough. could still need add is_removed ...

Well, is_removed is only used by pci_destroy_dev() in your patch, right?

That means its only role is to protect the device from being destroyed
twice (or more times) in a row, but that surely would be a bug?  I don't
see how that can legitimately happen at least, so what exactly is the
scenario?

> Please check
> 
> https://lkml.org/lkml/2013/5/13/653
> PATCH 3/7] PCI: Detach driver in pci_stop_device

It looks like there are more patches needed to apply this one.

Thanks!

-- 
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH] PCI: Move device_del() from pci_stop_dev() to pci_destroy_dev()
  2013-11-25 11:22         ` Rafael J. Wysocki
@ 2013-11-25 19:45           ` Yinghai Lu
  2013-11-25 20:57             ` Rafael J. Wysocki
  0 siblings, 1 reply; 17+ messages in thread
From: Yinghai Lu @ 2013-11-25 19:45 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: Bjorn Helgaas, Greg Kroah-Hartman, Tejun Heo, Mika Westerberg,
	linux-kernel@vger.kernel.org, Linux PCI

On Mon, Nov 25, 2013 at 3:22 AM, Rafael J. Wysocki <rjw@rjwysocki.net> wrote:
>
> Well, is_removed is only used by pci_destroy_dev() in your patch, right?
>
> That means its only role is to protect the device from being destroyed
> twice (or more times) in a row, but that surely would be a bug?  I don't
> see how that can legitimately happen at least, so what exactly is the
> scenario?

The thread:
https://patchwork.kernel.org/patch/3119001/

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH] PCI: Move device_del() from pci_stop_dev() to pci_destroy_dev()
  2013-11-25 19:45           ` Yinghai Lu
@ 2013-11-25 20:57             ` Rafael J. Wysocki
  0 siblings, 0 replies; 17+ messages in thread
From: Rafael J. Wysocki @ 2013-11-25 20:57 UTC (permalink / raw)
  To: Yinghai Lu
  Cc: Bjorn Helgaas, Greg Kroah-Hartman, Tejun Heo, Mika Westerberg,
	linux-kernel@vger.kernel.org, Linux PCI

On Monday, November 25, 2013 11:45:50 AM Yinghai Lu wrote:
> On Mon, Nov 25, 2013 at 3:22 AM, Rafael J. Wysocki <rjw@rjwysocki.net> wrote:
> >
> > Well, is_removed is only used by pci_destroy_dev() in your patch, right?
> >
> > That means its only role is to protect the device from being destroyed
> > twice (or more times) in a row, but that surely would be a bug?  I don't
> > see how that can legitimately happen at least, so what exactly is the
> > scenario?
> 
> The thread:
> https://patchwork.kernel.org/patch/3119001/

Thanks for the pointer.

Well, so we have a bug in there and it is a *race* so adding a device flag
is not going to really help.  Besides, if the put_device() really frees the
struct pci_dev, accessing the flag itself would be a use-after-free,
wouldn't it?

What seems to be necessary is a lock preventing the
/sys/bus/pci/devices/.../remove interface from being used on multiple devices
in parallel.  Of course, it also has to protect against removals from hotplug
events racing with removals from /sys/bus/pci/devices/.../remove.

In any case, it is beyond the scope of the $subject patch, though.

Thanks,
Rafael

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH] PCI: Move device_del() from pci_stop_dev() to pci_destroy_dev()
  2013-11-24  0:17     ` [PATCH] PCI: Move device_del() from pci_stop_dev() to pci_destroy_dev() Rafael J. Wysocki
  2013-11-25  4:54       ` Yinghai Lu
@ 2013-11-25  9:47       ` Mika Westerberg
  2013-11-25 11:24         ` Rafael J. Wysocki
  2013-11-25 21:59       ` Bjorn Helgaas
  2 siblings, 1 reply; 17+ messages in thread
From: Mika Westerberg @ 2013-11-25  9:47 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: Bjorn Helgaas, Greg Kroah-Hartman, Tejun Heo,
	linux-kernel@vger.kernel.org, Linux PCI

On Sun, Nov 24, 2013 at 01:17:52AM +0100, Rafael J. Wysocki wrote:
> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> 
> After commit bcdde7e221a8 (sysfs: make __sysfs_remove_dir() recursive)
> I'm seeing traces analogous to the one below in Thunderbolt testing:
> 
> WARNING: CPU: 3 PID: 76 at /scratch/rafael/work/linux-pm/fs/sysfs/group.c:214 sysfs_remove_group+0x59/0xe0()
>  sysfs group ffffffff81c6c500 not found for kobject '0000:08'
>  Modules linked in: fuse hidp af_packet xt_tcpudp xt_pkttype xt_LOG xt_limit ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_raw ipt_REJECT iptable_raw xt_CT iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_broadcast nf_conntrack_ipv4 nf_defrag_ipv4 ip_tables xt_conntrack nf_conntrack rfcomm ip6table_filter bnep ip6_tables x_tables arc4 ath9k mac80211 x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul iTCO_wdt crc32c_intel iTCO_vendor_support ghash_clmulni_intel aesni_intel ablk_helper acer_wmi sparse_keymap ath9k_common ath9k_hw cryptd lrw gf128mul ath3k glue_helper aes_x86_64 btusb microcode ath pcspkr joydev uvcvideo serio_raw videobuf2_core i2c_i801 videodev snd_hda_codec_hdmi cfg80211 videobuf2_vmalloc tg3 videobuf2_memops sg ptp pps_core lpc_ich mfd_core snd_hda_codec_realtek bluetooth hid_logitech_dj rfkill snd_hda_intel snd_hda_codec shpchp battery ac wmi acpi_cpufreq edd snd_usb_audio snd_pcm snd_page_alloc snd_hwdep snd_usbmidi_lib 
> snd_rawmidi snd_seq snd_timer snd_seq_device snd soundcore autofs4 xhci_hcd processor scsi_dh_hp_sw scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_dh
>  CPU: 3 PID: 76 Comm: kworker/u16:7 Not tainted 3.13.0-rc1+ #76
>  Hardware name: Acer Aspire S5-391/Venus    , BIOS V1.02 05/29/2012
>  Workqueue: kacpi_hotplug acpi_hotplug_work_fn
>   0000000000000009 ffff8801644b9ac8 ffffffff816b23bf 0000000000000007
>   ffff8801644b9b18 ffff8801644b9b08 ffffffff81046607 ffff88016925b800
>   0000000000000000 ffffffff81c6c500 ffff88016924f928 ffff88016924f800
>  Call Trace:
>   [<ffffffff816b23bf>] dump_stack+0x4e/0x71
>   [<ffffffff81046607>] warn_slowpath_common+0x87/0xb0
>   [<ffffffff810466d1>] warn_slowpath_fmt+0x41/0x50
>   [<ffffffff811e42ef>] ? sysfs_get_dirent_ns+0x6f/0x80
>   [<ffffffff811e5389>] sysfs_remove_group+0x59/0xe0
>   [<ffffffff8149f00b>] dpm_sysfs_remove+0x3b/0x50
>   [<ffffffff81495818>] device_del+0x58/0x1c0
>   [<ffffffff814959c8>] device_unregister+0x48/0x60
>   [<ffffffff813254fe>] pci_remove_bus+0x6e/0x80
>   [<ffffffff81325548>] pci_remove_bus_device+0x38/0x110
>   [<ffffffff8132555d>] pci_remove_bus_device+0x4d/0x110
>   [<ffffffff81325639>] pci_stop_and_remove_bus_device+0x19/0x20
>   [<ffffffff813418d0>] disable_slot+0x20/0xe0
>   [<ffffffff81341a38>] acpiphp_check_bridge+0xa8/0xd0
>   [<ffffffff813427ad>] hotplug_event+0x17d/0x220
>   [<ffffffff81342880>] hotplug_event_work+0x30/0x70
>   [<ffffffff8136d665>] acpi_hotplug_work_fn+0x18/0x24
>   [<ffffffff81061331>] process_one_work+0x261/0x450
>   [<ffffffff81061a7e>] worker_thread+0x21e/0x370
>   [<ffffffff81061860>] ? rescuer_thread+0x300/0x300
>   [<ffffffff81068342>] kthread+0xd2/0xe0
>   [<ffffffff81068270>] ? flush_kthread_worker+0x70/0x70
>   [<ffffffff816c19bc>] ret_from_fork+0x7c/0xb0
>   [<ffffffff81068270>] ? flush_kthread_worker+0x70/0x70
> 
> (Mika Westerberg sees them too in his tests).
> 
> Some investigation documented in kernel bug #65281 lead me to the
> conclusion that the source of the problem is the device_del() in
> pci_stop_dev() as it now causes the sysfs directory of the device
> to be removed recursively along with all of its subdirectories.
> That includes the sysfs directory of the device's subordinate
> bus (dev->subordinate) and its "power" group.
> 
> Consequently, when pci_remove_bus() is called for dev->subordinate
> in pci_remove_bus_device(), it calls device_unregister(&bus->dev),
> but at this point the sysfs directory of bus->dev doesn't exist any
> more and its "power" group doesn't exist either.  Thus, when
> dpm_sysfs_remove() called from device_del() tries to remove that
> group, it triggers the above warning.
> 
> That indicates a logical mistake in the design of
> pci_stop_and_remove_bus_device(), which causes bus device objects
> to be left behind their parents (bridge device objects) and can be
> fixed by moving the device_del() from pci_stop_dev() into
> pci_destroy_dev(), so pci_remove_bus() can be called for the
> device's subordinate bus before the device itself is unregistered
> from the hierarchy.  Still, the driver, if any, should be detached
> from the device in pci_stop_dev(), so use device_release_driver()
> directly from there.

With only this patch applied, I can still see the warnings :-/ I'm going to
test the ata fix you proposed soon.

Here's the whole dmesg taken from Intel NUC after TBT hot-unplug:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.13.0-rc1+ (westeri@blue) (gcc version 4.8.2 (Debian 4.8.2-5) ) #49 SMP Mon Nov 25 11:30:53 EET 2013
[    0.000000] Command line: console=tty1 buildroot_hostname=nuc loglevel=10 acpiphp.dyndbg=+p
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000100-0x000000000009ebff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040005000-0x0000000074fd8fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000074fd9000-0x00000000752fdfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000752fe000-0x000000007530dfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007530e000-0x0000000075423fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000075424000-0x000000007569bfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007569c000-0x000000007569cfff] usable
[    0.000000] BIOS-e820: [mem 0x000000007569d000-0x00000000756dffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000756e0000-0x0000000075ffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000076800000-0x000000007e9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001005fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI:                  /D33217CK, BIOS GKPPT10H.86A.0042.2013.0422.1439 04/22/2013
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x100600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 100000000 mask FFFC00000 write-back
[    0.000000]   2 base 100400000 mask FFFE00000 write-back
[    0.000000]   3 base 080000000 mask F80000000 uncachable
[    0.000000]   4 base 078000000 mask FF8000000 uncachable
[    0.000000]   5 base 077000000 mask FFF000000 uncachable
[    0.000000]   6 base 076800000 mask FFF800000 uncachable
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106
[    0.000000] e820: update [mem 0x76800000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0x76000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd700-0x000fd70f] mapped at [ffff8800000fd700]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x020f3000, 0x020f3fff] PGTABLE
[    0.000000] BRK [0x020f4000, 0x020f4fff] PGTABLE
[    0.000000] BRK [0x020f5000, 0x020f5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x100400000-0x1005fffff]
[    0.000000]  [mem 0x100400000-0x1005fffff] page 2M
[    0.000000] BRK [0x020f6000, 0x020f6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x100000000-0x1003fffff]
[    0.000000]  [mem 0x100000000-0x1003fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x40003fff] page 4k
[    0.000000] BRK [0x020f7000, 0x020f7fff] PGTABLE
[    0.000000] BRK [0x020f8000, 0x020f8fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x40005000-0x74fd8fff]
[    0.000000]  [mem 0x40005000-0x401fffff] page 4k
[    0.000000]  [mem 0x40200000-0x74dfffff] page 2M
[    0.000000]  [mem 0x74e00000-0x74fd8fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x7569c000-0x7569cfff]
[    0.000000]  [mem 0x7569c000-0x7569cfff] page 4k
[    0.000000] init_memory_mapping: [mem 0x756e0000-0x75ffffff]
[    0.000000]  [mem 0x756e0000-0x757fffff] page 4k
[    0.000000]  [mem 0x75800000-0x75ffffff] page 2M
[    0.000000] RAMDISK: [mem 0x75bd8000-0x75ff5fff]
[    0.000000] ACPI: RSDP 00000000000f0490 000024 (v02  INTEL)
[    0.000000] ACPI: XSDT 0000000075303070 000064 (v01  Intel D33217CK 0000002A AMI  00010013)
[    0.000000] ACPI: FACP 000000007530c6a0 00010C (v05  Intel D33217CK 0000002A AMI  00010013)
[    0.000000] ACPI: DSDT 0000000075303168 009532 (v02  Intel D33217CK 0000002A INTL 20051117)
[    0.000000] ACPI: FACS 0000000075422080 000040
[    0.000000] ACPI: APIC 000000007530c7b0 000072 (v03  Intel D33217CK 0000002A AMI  00010013)
[    0.000000] ACPI: FPDT 000000007530c828 000044 (v01  Intel D33217CK 0000002A AMI  00010013)
[    0.000000] ACPI: MCFG 000000007530c870 00003C (v01  Intel D33217CK 0000002A MSFT 00000097)
[    0.000000] ACPI: HPET 000000007530c8b0 000038 (v01  Intel D33217CK 0000002A AMI. 00000005)
[    0.000000] ACPI: SSDT 000000007530c8e8 000315 (v01  Intel D33217CK 0000002A INTL 20091112)
[    0.000000] ACPI: SSDT 000000007530cc00 0008A2 (v01  Intel D33217CK 0000002A INTL 20051117)
[    0.000000] ACPI: SSDT 000000007530d4a8 000A92 (v01  Intel D33217CK 0000002A INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000001005fffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x1005fffff]
[    0.000000]   NODE_DATA [mem 0x1005fa000-0x1005fdfff]
[    0.000000]  [ffffea0000000000-ffffea00041fffff] PMD -> [ffff880072e00000-ffff880074dfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x1005fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009dfff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x40003fff]
[    0.000000]   node   0: [mem 0x40005000-0x74fd8fff]
[    0.000000]   node   0: [mem 0x7569c000-0x7569cfff]
[    0.000000]   node   0: [mem 0x756e0000-0x75ffffff]
[    0.000000]   node   0: [mem 0x100000000-0x1005fffff]
[    0.000000] On node 0 totalpages: 482454
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7452 pages used for memmap
[    0.000000]   DMA32 zone: 476921 pages, LIFO batch:31
[    0.000000]   Normal zone: 24 pages used for memmap
[    0.000000]   Normal zone: 1536 pages, LIFO batch:0
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[    0.000000] PM: Registered nosave memory: [mem 0x74fd9000-0x752fdfff]
[    0.000000] PM: Registered nosave memory: [mem 0x752fe000-0x7530dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7530e000-0x75423fff]
[    0.000000] PM: Registered nosave memory: [mem 0x75424000-0x7569bfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7569d000-0x756dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x76000000-0x767fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x76800000-0x7e9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7ea00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0x7ea00000-0xf7ffffff] available for PCI devices
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff880100200000 s79424 r8192 d22976 u524288
[    0.000000] pcpu-alloc: s79424 r8192 d22976 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 474893
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: console=tty1 buildroot_hostname=nuc loglevel=10 acpiphp.dyndbg=+p
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 1808800K/1929816K available (8322K kernel code, 903K rwdata, 2820K rodata, 1064K init, 1012K bss, 121016K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.000000] NR_IRQS:4352 nr_irqs:712 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty1] enabled
[    0.000000] hpet clockevent registered
[    0.001000] tsc: Fast TSC calibration using PIT
[    0.002000] tsc: Detected 1797.685 MHz processor
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3595.37 BogoMIPS (lpj=1797685)
[    0.000008] pid_max: default: 32768 minimum: 301
[    0.000033] Security Framework initialized
[    0.000041] SELinux:  Initializing.
[    0.000050] SELinux:  Starting in permissive mode
[    0.000239] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000975] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.001300] Mount-cache hash table entries: 256
[    0.001519] Initializing cgroup subsys freezer
[    0.001547] CPU: Physical Processor ID: 0
[    0.001549] CPU: Processor Core ID: 1
[    0.001557] mce: CPU supports 7 MCE banks
[    0.001569] CPU0: Thermal LVT vector (0xfa) already installed
[    0.001579] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[    0.001579] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[    0.001579] tlb_flushall_shift: 1
[    0.001764] Freeing SMP alternatives memory: 28K (ffffffff81fed000 - ffffffff81ff4000)
[    0.001769] ACPI: Core revision 20130927
[    0.009936] ACPI: All ACPI Tables successfully acquired
[    0.010452] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.020464] smpboot: CPU0: Intel(R) Core(TM) i3-3217U CPU @ 1.80GHz (fam: 06, model: 3a, stepping: 09)
[    0.020477] TSC deadline timer enabled
[    0.020487] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[    0.020498] ... version:                3
[    0.020501] ... bit width:              48
[    0.020503] ... generic registers:      4
[    0.020505] ... value mask:             0000ffffffffffff
[    0.020507] ... max period:             0000ffffffffffff
[    0.020509] ... fixed-purpose events:   3
[    0.020511] ... event mask:             000000070000000f
[    0.021323] x86: Booting SMP configuration:
[    0.032381] CPU1: Thermal LVT vector (0xfa) already installed
[    0.045738] CPU2: Thermal LVT vector (0xfa) already installed
[    0.059076] CPU3: Thermal LVT vector (0xfa) already installed
[    0.021327] .... node  #0, CPUs:      #1 #2 #3
[    0.061180] x86: Booted up 1 node, 4 CPUs
[    0.061188] smpboot: Total of 4 processors activated (14381.48 BogoMIPS)
[    0.064970] devtmpfs: initialized
[    0.065195] PM: Registering ACPI NVS region [mem 0x7530e000-0x75423fff] (1138688 bytes)
[    0.065218] PM: Registering ACPI NVS region [mem 0x7569d000-0x756dffff] (274432 bytes)
[    0.065316] kworker/u8:0 (26) used greatest stack depth: 5936 bytes left
[    0.065483] RTC time: 17:26:57, date: 11/25/13
[    0.065527] NET: Registered protocol family 16
[    0.065947] cpuidle: using governor ladder
[    0.065953] cpuidle: using governor menu
[    0.066006] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.066010] ACPI: bus type PCI registered
[    0.066013] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.066105] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.066111] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.075476] PCI: Using configuration type 1 for base access
[    0.076403] kworker/u8:0 (69) used greatest stack depth: 5848 bytes left
[    0.085708] bio: create slab <bio-0> at 0
[    0.085897] ACPI: Added _OSI(Module Device)
[    0.085903] ACPI: Added _OSI(Processor Device)
[    0.085908] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.085912] ACPI: Added _OSI(Processor Aggregator Device)
[    0.089696] ACPI: Executed 1 blocks of module-level executable AML code
[    0.098611] ACPI: SSDT 00000000752ab018 00083B (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.099099] ACPI: Dynamic OEM Table Load:
[    0.099103] ACPI: SSDT           (null) 00083B (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.104301] ACPI: SSDT 00000000752aca98 000303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.104831] ACPI: Dynamic OEM Table Load:
[    0.104834] ACPI: SSDT           (null) 000303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.107018] ACPI: SSDT 00000000752adc18 000119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.107472] ACPI: Dynamic OEM Table Load:
[    0.107476] ACPI: SSDT           (null) 000119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.110848] ACPI: Interpreter enabled
[    0.110863] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130927/hwxface-580)
[    0.110883] ACPI: (supports S0 S1 S3 S4 S5)
[    0.110886] ACPI: Using IOAPIC for interrupt routing
[    0.110968] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.111222] ACPI: No dock devices found.
[    0.124988] ACPI: Power Resource [FN00] (off)
[    0.125172] ACPI: Power Resource [FN01] (off)
[    0.125350] ACPI: Power Resource [FN02] (off)
[    0.125523] ACPI: Power Resource [FN03] (off)
[    0.125696] ACPI: Power Resource [FN04] (off)
[    0.126800] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.126811] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.127140] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[    0.127410] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[    0.128449] ACPI: \_SB_.PCI0.TPMX: can't evaluate _ADR (0x5)
[    0.128714] ACPI: \_SB_.PCI0.PDRC: can't evaluate _ADR (0x5)
[    0.128718] ACPI: \_SB_.PCI0.DOCK: can't evaluate _ADR (0x5)
[    0.128721] PCI host bridge to bus 0000:00
[    0.128726] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.128729] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.128732] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.128736] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.128739] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.128742] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.128745] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.128749] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    0.128752] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    0.128755] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    0.128758] pci_bus 0000:00: root bus resource [mem 0x7ea00000-0xfeafffff]
[    0.128762] pci_bus 0000:00: scanning bus
[    0.128773] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    0.128785] pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0x10
[    0.128942] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[    0.128964] pci 0000:00:02.0: reg 0x10: [mem 0xf6400000-0xf67fffff 64bit]
[    0.128974] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
[    0.128982] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.129161] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.129193] pci 0000:00:16.0: reg 0x10: [mem 0xf680b000-0xf680b00f 64bit]
[    0.129280] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.129287] pci 0000:00:16.0: PME# disabled
[    0.129437] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.129465] pci 0000:00:1a.0: reg 0x10: [mem 0xf6808000-0xf68083ff]
[    0.129569] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.129576] pci 0000:00:1a.0: PME# disabled
[    0.129685] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.129758] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.129782] pci 0000:00:1b.0: reg 0x10: [mem 0xf6800000-0xf6803fff 64bit]
[    0.129863] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.129869] pci 0000:00:1b.0: PME# disabled
[    0.129951] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.130050] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.130121] pci 0000:00:1c.0: calling pci_fixup_transparent_bridge+0x0/0x30
[    0.130196] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.130203] pci 0000:00:1c.0: PME# disabled
[    0.130293] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.130366] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400
[    0.130431] pci 0000:00:1c.4: calling pci_fixup_transparent_bridge+0x0/0x30
[    0.130504] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.130511] pci 0000:00:1c.4: PME# disabled
[    0.130599] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.130671] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.130700] pci 0000:00:1d.0: reg 0x10: [mem 0xf6807000-0xf68073ff]
[    0.130804] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.130811] pci 0000:00:1d.0: PME# disabled
[    0.130921] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.130992] pci 0000:00:1f.0: [8086:1e56] type 00 class 0x060100
[    0.131250] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.131278] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.131289] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.131300] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    0.131311] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    0.131323] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.131335] pci 0000:00:1f.2: reg 0x24: [mem 0xf6806000-0xf68067ff]
[    0.131390] pci 0000:00:1f.2: PME# supported from D3hot
[    0.131395] pci 0000:00:1f.2: PME# disabled
[    0.131527] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.131551] pci 0000:00:1f.3: reg 0x10: [mem 0xf6805000-0xf68050ff 64bit]
[    0.131577] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.131722] pci_bus 0000:00: fixups for bus
[    0.131729] pci 0000:00:1c.0: scanning [bus 01-01] behind bridge, pass 0
[    0.131850] pci_bus 0000:01: scanning bus
[    0.131858] pci_bus 0000:01: fixups for bus
[    0.131861] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.131881] pci_bus 0000:01: bus scan returning with max=01
[    0.131889] pci 0000:00:1c.4: scanning [bus 02-3a] behind bridge, pass 0
[    0.132041] pci_bus 0000:02: scanning bus
[    0.132049] pci_bus 0000:02: fixups for bus
[    0.132051] pci 0000:00:1c.4: PCI bridge to [bus 02-3a]
[    0.132058] pci 0000:00:1c.4:   bridge window [io  0x2000-0x2fff]
[    0.132065] pci 0000:00:1c.4:   bridge window [mem 0xe0000000-0xf60fffff]
[    0.132075] pci 0000:00:1c.4:   bridge window [mem 0xb0000000-0xd1ffffff 64bit pref]
[    0.132079] pci_bus 0000:02: bus scan returning with max=02
[    0.132090] pci 0000:00:1c.0: scanning [bus 01-01] behind bridge, pass 1
[    0.132101] pci 0000:00:1c.4: scanning [bus 02-3a] behind bridge, pass 1
[    0.132110] pci_bus 0000:00: bus scan returning with max=3a
[    0.132113] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[    0.132753] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
[    0.132862] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.132966] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15), disabled.
[    0.133079] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15), disabled.
[    0.133183] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.133288] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.133394] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15), disabled.
[    0.133496] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15), disabled.
[    0.133839] ACPI: Enabled 7 GPEs in block 00 to 3F
[    0.133851] ACPI: \_SB_.PCI0: notify handler is installed
[    0.133931] Found 1 acpi root devices
[    0.134119] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.134125] vgaarb: loaded
[    0.134127] vgaarb: bridge control possible 0000:00:02.0
[    0.134270] SCSI subsystem initialized
[    0.134394] libata version 3.00 loaded.
[    0.134511] ACPI: bus type USB registered
[    0.134577] usbcore: registered new interface driver usbfs
[    0.134614] usbcore: registered new interface driver hub
[    0.134664] usbcore: registered new device driver usb
[    0.134780] pps_core: LinuxPPS API ver. 1 registered
[    0.134783] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.134811] PTP clock support registered
[    0.134985] Advanced Linux Sound Architecture Driver Initialized.
[    0.134989] PCI: Using ACPI for IRQ routing
[    0.138251] PCI: pci_cache_line_size set to 64 bytes
[    0.138260] pci 0000:00:02.0: BAR 0: reserving [mem 0xf6400000-0xf67fffff flags 0x140204] (d=0, p=0)
[    0.138265] pci 0000:00:02.0: BAR 2: reserving [mem 0xa0000000-0xafffffff flags 0x14220c] (d=0, p=0)
[    0.138270] pci 0000:00:02.0: BAR 4: reserving [io  0xf000-0xf03f flags 0x40101] (d=0, p=0)
[    0.138279] pci 0000:00:16.0: BAR 0: reserving [mem 0xf680b000-0xf680b00f flags 0x140204] (d=0, p=0)
[    0.138288] pci 0000:00:1a.0: BAR 0: reserving [mem 0xf6808000-0xf68083ff flags 0x40200] (d=0, p=0)
[    0.138296] pci 0000:00:1b.0: BAR 0: reserving [mem 0xf6800000-0xf6803fff flags 0x140204] (d=0, p=0)
[    0.138308] pci 0000:00:1d.0: BAR 0: reserving [mem 0xf6807000-0xf68073ff flags 0x40200] (d=0, p=0)
[    0.138318] pci 0000:00:1f.2: BAR 0: reserving [io  0xf0b0-0xf0b7 flags 0x40101] (d=0, p=0)
[    0.138322] pci 0000:00:1f.2: BAR 1: reserving [io  0xf0a0-0xf0a3 flags 0x40101] (d=0, p=0)
[    0.138326] pci 0000:00:1f.2: BAR 2: reserving [io  0xf090-0xf097 flags 0x40101] (d=0, p=0)
[    0.138330] pci 0000:00:1f.2: BAR 3: reserving [io  0xf080-0xf083 flags 0x40101] (d=0, p=0)
[    0.138334] pci 0000:00:1f.2: BAR 4: reserving [io  0xf060-0xf07f flags 0x40101] (d=0, p=0)
[    0.138339] pci 0000:00:1f.2: BAR 5: reserving [mem 0xf6806000-0xf68067ff flags 0x40200] (d=0, p=0)
[    0.138347] pci 0000:00:1f.3: BAR 0: reserving [mem 0xf6805000-0xf68050ff flags 0x140204] (d=0, p=0)
[    0.138351] pci 0000:00:1f.3: BAR 4: reserving [io  0xf040-0xf05f flags 0x40101] (d=0, p=0)
[    0.138374] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[    0.138377] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[    0.138380] e820: reserve RAM buffer [mem 0x74fd9000-0x77ffffff]
[    0.138384] e820: reserve RAM buffer [mem 0x7569d000-0x77ffffff]
[    0.138387] e820: reserve RAM buffer [mem 0x76000000-0x77ffffff]
[    0.138390] e820: reserve RAM buffer [mem 0x100600000-0x103ffffff]
[    0.138700] cfg80211: Calling CRDA to update world regulatory domain
[    0.138808] NetLabel: Initializing
[    0.138811] NetLabel:  domain hash size = 128
[    0.138813] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.138838] NetLabel:  unlabeled traffic allowed by default
[    0.138977] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.138987] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.141031] Switched to clocksource hpet
[    0.145563] pnp: PnP ACPI init
[    0.145575] ACPI: bus type PNP registered
[    0.145735] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.145742] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.145763] pnp 00:01: [dma 4]
[    0.145821] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.145889] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    0.146113] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.146209] system 00:04: [io  0x0680-0x069f] has been reserved
[    0.146213] system 00:04: [io  0x1000-0x100f] has been reserved
[    0.146217] system 00:04: [io  0xffff] has been reserved
[    0.146220] system 00:04: [io  0xffff] has been reserved
[    0.146224] system 00:04: [io  0x0400-0x0453] could not be reserved
[    0.146227] system 00:04: [io  0x0458-0x047f] has been reserved
[    0.146230] system 00:04: [io  0x0500-0x057f] has been reserved
[    0.146234] system 00:04: [io  0x164e-0x164f] has been reserved
[    0.146238] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.146317] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.146426] system 00:06: [io  0x0454-0x0457] has been reserved
[    0.146431] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.146680] system 00:07: [io  0x0a00-0x0a1f] has been reserved
[    0.146685] system 00:07: [io  0x0a30-0x0a3f] has been reserved
[    0.146688] system 00:07: [io  0x0a20-0x0a2f] has been reserved
[    0.146692] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.146836] system 00:08: [io  0x04d0-0x04d1] has been reserved
[    0.146841] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.146919] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.147374] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.147379] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.147382] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.147386] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.147390] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.147393] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.147397] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.147400] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.147403] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
[    0.147407] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.147411] system 00:0a: [mem 0x7ea00000-0x7ea00fff] has been reserved
[    0.147415] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.147723] system 00:0b: [mem 0x20000000-0x201fffff] has been reserved
[    0.147728] system 00:0b: [mem 0x40004000-0x40004fff] has been reserved
[    0.147732] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.147768] pnp: PnP ACPI: found 12 devices
[    0.147771] ACPI: bus type PNP unregistered
[    0.157917] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.157942] pci 0000:00:1c.4: PCI bridge to [bus 02-3a]
[    0.157947] pci 0000:00:1c.4:   bridge window [io  0x2000-0x2fff]
[    0.157956] pci 0000:00:1c.4:   bridge window [mem 0xe0000000-0xf60fffff]
[    0.157963] pci 0000:00:1c.4:   bridge window [mem 0xb0000000-0xd1ffffff 64bit pref]
[    0.157975] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.157978] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.157982] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.157985] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[    0.157988] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[    0.157991] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[    0.157994] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[    0.157997] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[    0.158001] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[    0.158004] pci_bus 0000:00: resource 13 [mem 0x7ea00000-0xfeafffff]
[    0.158008] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.158011] pci_bus 0000:02: resource 1 [mem 0xe0000000-0xf60fffff]
[    0.158014] pci_bus 0000:02: resource 2 [mem 0xb0000000-0xd1ffffff 64bit pref]
[    0.158061] NET: Registered protocol family 2
[    0.158208] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.158263] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.158305] TCP: Hash tables configured (established 16384 bind 16384)
[    0.158326] TCP: reno registered
[    0.158334] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.158346] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.158405] NET: Registered protocol family 1
[    0.158493] RPC: Registered named UNIX socket transport module.
[    0.158496] RPC: Registered udp transport module.
[    0.158499] RPC: Registered tcp transport module.
[    0.158501] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.158514] pci 0000:00:02.0: calling pci_fixup_video+0x0/0xd0
[    0.158517] pci 0000:00:02.0: Boot video device
[    0.158530] pci 0000:00:1a.0: calling quirk_usb_early_handoff+0x0/0x6f0
[    0.158794] pci 0000:00:1d.0: calling quirk_usb_early_handoff+0x0/0x6f0
[    0.159011] PCI: CLS 64 bytes, default 64
[    0.159084] Unpacking initramfs...
[    1.127055] Freeing initrd memory: 4216K (ffff880075bd8000 - ffff880075ff6000)
[    1.127065] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.127069] software IO TLB [mem 0x6ee00000-0x72e00000] (64MB) mapped at [ffff88006ee00000-ffff880072dfffff]
[    1.128063] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
[    1.128072] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
[    1.128082] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
[    1.128094] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
[    1.128171] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.128176] Scanning for low memory corruption every 60 seconds
[    1.128834] audit: initializing netlink socket (disabled)
[    1.128853] type=2000 audit(1385400418.121:1): initialized
[    1.162177] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.166132] VFS: Disk quotas dquot_6.5.2
[    1.166217] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.167493] NFS: Registering the id_resolver key type
[    1.167503] Key type id_resolver registered
[    1.167506] Key type id_legacy registered
[    1.167599] msgmni has been set to 3541
[    1.167696] SELinux:  Registering netfilter hooks
[    1.168244] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.168249] io scheduler noop registered
[    1.168251] io scheduler deadline registered
[    1.168319] io scheduler cfq registered (default)
[    1.168873] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.169014] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.169307] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    1.169315] ACPI: Power Button [PWRB]
[    1.169393] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.169398] ACPI: Power Button [PWRF]
[    1.169550] ACPI: Fan [FAN0] (off)
[    1.169629] ACPI: Fan [FAN1] (off)
[    1.169714] ACPI: Fan [FAN2] (off)
[    1.169790] ACPI: Fan [FAN3] (off)
[    1.169864] ACPI: Fan [FAN4] (off)
[    1.175207] Monitor-Mwait will be used to enter C-1 state
[    1.175214] Monitor-Mwait will be used to enter C-2 state
[    1.175220] ACPI: acpi_idle registered with cpuidle
[    1.182397] thermal LNXTHERM:00: registered as thermal_zone0
[    1.182402] ACPI: Thermal Zone [TZ00] (28 C)
[    1.182824] thermal LNXTHERM:01: registered as thermal_zone1
[    1.182828] ACPI: Thermal Zone [TZ01] (30 C)
[    1.183047] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.184019] Non-volatile memory driver v1.3
[    1.184023] Linux agpgart interface v0.103
[    1.184228] [drm] Initialized drm 1.1.0 20060810
[    1.185745] [drm] Memory usable by graphics device = 2048M
[    1.232896] i915 0000:00:02.0: irq 40 for MSI/MSI-X
[    1.232908] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.232911] [drm] Driver supports precise vblank timestamp query.
[    1.233054] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.310810] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
[    1.319172] i915 0000:00:02.0: No connectors reported connected with modes
[    1.319181] [drm] Cannot find any crtc or sizes - going 1024x768
[    1.320518] fbcon: inteldrmfb (fb0) is primary device
[    1.346832] Console: switching to colour frame buffer device 128x48
[    1.349241] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    1.349275] i915 0000:00:02.0: registered panic notifier
[    1.354906] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.355244] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input2
[    1.355432] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    1.357143] loop: module loaded
[    1.357466] ahci 0000:00:1f.2: version 3.0
[    1.357656] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[    1.357703] ahci 0000:00:1f.2: forcing PORTS_IMPL to 0x3f
[    1.357799] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    1.357862] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    1.357908] ahci 0000:00:1f.2: enabling bus mastering
[    1.359261] scsi0 : ahci
[    1.359430] scsi1 : ahci
[    1.359579] scsi2 : ahci
[    1.359729] scsi3 : ahci
[    1.359899] scsi4 : ahci
[    1.361028] scsi5 : ahci
[    1.362125] ata1: SATA max UDMA/133 abar m2048@0xf6806000 port 0xf6806100 irq 41
[    1.363173] ata2: SATA max UDMA/133 abar m2048@0xf6806000 port 0xf6806180 irq 41
[    1.364218] ata3: SATA max UDMA/133 abar m2048@0xf6806000 port 0xf6806200 irq 41
[    1.365247] ata4: SATA max UDMA/133 abar m2048@0xf6806000 port 0xf6806280 irq 41
[    1.366267] ata5: SATA max UDMA/133 abar m2048@0xf6806000 port 0xf6806300 irq 41
[    1.367266] ata6: SATA max UDMA/133 abar m2048@0xf6806000 port 0xf6806380 irq 41
[    1.368736] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    1.369732] e100: Copyright(c) 1999-2006 Intel Corporation
[    1.370807] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    1.371809] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    1.372899] sky2: driver version 1.30
[    1.374472] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.375490] ehci-pci: EHCI PCI platform driver
[    1.376656] ehci-pci 0000:00:1a.0: enabling bus mastering
[    1.377677] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.378764] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.379788] ehci-pci 0000:00:1a.0: debug port 2
[    1.384681] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.385682] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf6808000
[    1.391869] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.392841] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.393791] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.394734] usb usb1: Product: EHCI Host Controller
[    1.395669] usb usb1: Manufacturer: Linux 3.13.0-rc1+ ehci_hcd
[    1.396595] usb usb1: SerialNumber: 0000:00:1a.0
[    1.397702] hub 1-0:1.0: USB hub found
[    1.398634] hub 1-0:1.0: 2 ports detected
[    1.399791] ehci-pci 0000:00:1d.0: enabling bus mastering
[    1.400694] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.401694] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.402584] ehci-pci 0000:00:1d.0: debug port 2
[    1.407369] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.408269] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf6807000
[    1.414887] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.415783] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.416664] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.417549] usb usb2: Product: EHCI Host Controller
[    1.418426] usb usb2: Manufacturer: Linux 3.13.0-rc1+ ehci_hcd
[    1.419317] usb usb2: SerialNumber: 0000:00:1d.0
[    1.420469] hub 2-0:1.0: USB hub found
[    1.421398] hub 2-0:1.0: 2 ports detected
[    1.422521] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.423483] ohci-pci: OHCI PCI platform driver
[    1.424504] uhci_hcd: USB Universal Host Controller Interface driver
[    1.425733] usbcore: registered new interface driver usblp
[    1.426789] usbcore: registered new interface driver usb-storage
[    1.427890] usbcore: registered new interface driver usbserial
[    1.428946] usbcore: registered new interface driver pl2303
[    1.430017] usbserial: USB Serial support registered for pl2303
[    1.431281] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    2.130354] tsc: Refined TSC clocksource calibration: 1797.677 MHz
[    2.375510] ata4: failed to resume link (SControl 0)
[    2.376831] ata4: SATA link down (SStatus 0 SControl 0)
[    2.378135] ata1: failed to resume link (SControl 0)
[    2.379447] ata1: SATA link down (SStatus 0 SControl 0)
[    2.380748] ata5: failed to resume link (SControl 0)
[    2.382057] ata5: SATA link down (SStatus 0 SControl 0)
[    2.383366] ata2: failed to resume link (SControl 0)
[    2.384697] ata2: SATA link down (SStatus 0 SControl 0)
[    2.386007] ata3: failed to resume link (SControl 0)
[    2.387308] ata3: SATA link down (SStatus 0 SControl 0)
[    2.531573] i8042: No controller found
[    2.532683] mousedev: PS/2 mouse device common for all mice
[    2.534152] rtc_cmos 00:05: RTC can wake from S4
[    2.535282] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    2.536269] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    2.537454] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130927/utaddress-251)
[    2.539481] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.540968] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    2.542162] hidraw: raw HID events driver (C) Jiri Kosina
[    2.544258] usbcore: registered new interface driver usbhid
[    2.545370] usbhid: USB HID core driver
[    2.547236] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[    2.548392] snd_hda_intel 0000:00:1b.0: enabling bus mastering
[    2.557061] Netfilter messages via NETLINK v0.30.
[    2.558188] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    2.559426] ctnetlink v0.93: registering with nfnetlink.
[    2.560649] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.561775] TCP: cubic registered
[    2.562871] Initializing XFRM netlink socket
[    2.564272] NET: Registered protocol family 10
[    2.565541] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    2.566701] sit: IPv6 over IPv4 tunneling driver
[    2.568055] NET: Registered protocol family 17
[    2.569188] Key type dns_resolver registered
[    2.570911] registered taskstats version 1
[    2.572300]   Magic number: 5:89:442
[    2.573443] console [netcon0] enabled
[    2.574530] netconsole: network logging started
[    2.575682] rtc_cmos 00:05: setting system clock to 2013-11-25 17:26:59 UTC (1385400419)
[    2.577577] PM: Hibernation image not present or could not be loaded.
[    2.578724] ALSA device list:
[    2.579837]   #0: HDA Intel PCH at 0xf6800000 irq 42
[    2.711164] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[    2.733804] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.790813] ata6: failed to resume link (SControl 0)
[    2.791960] ata6: SATA link down (SStatus 0 SControl 0)
[    2.794100] Freeing unused kernel memory: 1064K (ffffffff81ee3000 - ffffffff81fed000)
[    2.795259] Write protecting the kernel read-only data: 14336k
[    2.801642] Freeing unused kernel memory: 1904K (ffff880001824000 - ffff880001a00000)
[    2.806242] Freeing unused kernel memory: 1276K (ffff880001cc1000 - ffff880001e00000)
[    2.824669] udevd[1067]: starting version 182
[    2.842541] udevadm (1068) used greatest stack depth: 5808 bytes left
[    2.849357] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    2.850833] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.852444] hub 1-1:1.0: USB hub found
[    2.852930] random: dd urandom read with 10 bits of entropy available
[    2.855527] hub 1-1:1.0: 6 ports detected
[    2.874773] ip (1091) used greatest stack depth: 5152 bytes left
[    2.958919] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    3.074455] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    3.075627] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.077076] hub 2-1:1.0: USB hub found
[    3.078454] hub 2-1:1.0: 8 ports detected
[    3.132145] Switched to clocksource tsc
[    3.355259] usb 2-1.2: new high-speed USB device number 3 using ehci-pci
[    3.443093] usb 2-1.2: New USB device found, idVendor=05e3, idProduct=0608
[    3.444283] usb 2-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.445501] usb 2-1.2: Product: USB2.0 Hub
[    3.447114] hub 2-1.2:1.0: USB hub found
[    3.448721] hub 2-1.2:1.0: 4 ports detected
[    3.716770] usb 2-1.2.1: new full-speed USB device number 4 using ehci-pci
[    3.793943] usb 2-1.2.1: New USB device found, idVendor=067b, idProduct=2303
[    3.795156] usb 2-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.796379] usb 2-1.2.1: Product: USB-Serial Controller D
[    3.797560] usb 2-1.2.1: Manufacturer: Prolific Technology Inc. 
[    3.799060] pl2303 2-1.2.1:1.0: pl2303 converter detected
[    3.802641] usb 2-1.2.1: pl2303 converter now attached to ttyUSB0
[    3.866864] usb 2-1.2.2: new full-speed USB device number 5 using ehci-pci
[    4.005068] usb 2-1.2.2: new high-speed USB device number 6 using ehci-pci
[    4.110246] usb 2-1.2.2: New USB device found, idVendor=0b95, idProduct=7720
[    4.111414] usb 2-1.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.112567] usb 2-1.2.2: Product: AX88772 
[    4.113692] usb 2-1.2.2: SerialNumber: 006BC1
[    4.190199] usb 2-1.2.3: new high-speed USB device number 7 using ehci-pci
[    4.283487] usb 2-1.2.3: New USB device found, idVendor=090c, idProduct=6200
[    4.284622] usb 2-1.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.285764] usb 2-1.2.3: Product: Generic USB2.0 card 
[    4.286890] usb 2-1.2.3: Manufacturer: Silicon Motion, Inc.
[    4.288003] usb 2-1.2.3: SerialNumber: 12345678901234567890
[    4.289374] usb-storage 2-1.2.3:1.0: USB Mass Storage device detected
[    4.290990] scsi6 : usb-storage 2-1.2.3:1.0
[    5.413622] scsi 6:0:0:0: Direct-Access     Generic  USB  SD Reader   1.00 PQ: 0 ANSI: 0 CCS
[    5.414859] sd 6:0:0:0: Attached scsi generic sg0 type 0
[    5.416606] sd 6:0:0:0: [sda] 7626752 512-byte logical blocks: (3.90 GB/3.63 GiB)
[    5.418315] sd 6:0:0:0: [sda] Write Protect is off
[    5.419401] sd 6:0:0:0: [sda] Mode Sense: 4b 00 00 08
[    5.421236] sd 6:0:0:0: [sda] No Caching mode page found
[    5.422306] sd 6:0:0:0: [sda] Assuming drive cache: write through
[    5.426442] sd 6:0:0:0: [sda] No Caching mode page found
[    5.427487] sd 6:0:0:0: [sda] Assuming drive cache: write through
[    5.429875]  sda: sda1
[    5.435197] sd 6:0:0:0: [sda] No Caching mode page found
[    5.436247] sd 6:0:0:0: [sda] Assuming drive cache: write through
[    5.437297] sd 6:0:0:0: [sda] Attached SCSI removable disk
[    8.582397] udevd (1069) used greatest stack depth: 5056 bytes left
[   53.861699] acpiphp_glue: hotplug_event: Bus check notify on \_SB_.PCI0.RP05
[   53.862772] acpiphp_glue: hotplug_event: re-enumerating slots under \_SB_.PCI0.RP05
[   53.863909] pci 0000:02:00.0: [8086:1548] type 01 class 0x060400
[   53.865107] pci 0000:02:00.0: calling pci_fixup_transparent_bridge+0x0/0x30
[   53.866334] pci 0000:02:00.0: supports D1 D2
[   53.867363] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[   53.868431] pci 0000:02:00.0: PME# disabled
[   53.869552] pci 0000:02:00.0: System wakeup disabled by ACPI
[   53.872530] pci 0000:02:00.0: scanning [bus 03-3a] behind bridge, pass 0
[   53.873767] pci_bus 0000:03: scanning bus
[   53.874941] pci 0000:03:00.0: [8086:1548] type 01 class 0x060400
[   53.876168] pci 0000:03:00.0: calling pci_fixup_transparent_bridge+0x0/0x30
[   53.877404] pci 0000:03:00.0: supports D1 D2
[   53.878451] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[   53.879526] pci 0000:03:00.0: PME# disabled
[   53.880744] pci 0000:03:03.0: [8086:1548] type 01 class 0x060400
[   53.882003] pci 0000:03:03.0: calling pci_fixup_transparent_bridge+0x0/0x30
[   53.883237] pci 0000:03:03.0: supports D1 D2
[   53.884284] pci 0000:03:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[   53.885361] pci 0000:03:03.0: PME# disabled
[   53.886582] pci 0000:03:04.0: [8086:1548] type 01 class 0x060400
[   53.887827] pci 0000:03:04.0: calling pci_fixup_transparent_bridge+0x0/0x30
[   53.889059] pci 0000:03:04.0: supports D1 D2
[   53.890105] pci 0000:03:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[   53.891172] pci 0000:03:04.0: PME# disabled
[   53.892383] pci 0000:03:05.0: [8086:1548] type 01 class 0x060400
[   53.893615] pci 0000:03:05.0: calling pci_fixup_transparent_bridge+0x0/0x30
[   53.894843] pci 0000:03:05.0: supports D1 D2
[   53.895882] pci 0000:03:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[   53.896935] pci 0000:03:05.0: PME# disabled
[   53.898104] pci 0000:03:06.0: [8086:1548] type 01 class 0x060400
[   53.899291] pci 0000:03:06.0: calling pci_fixup_transparent_bridge+0x0/0x30
[   53.900486] pci 0000:03:06.0: supports D1 D2
[   53.901496] pci 0000:03:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[   53.902544] pci 0000:03:06.0: PME# disabled
[   53.903776] pci_bus 0000:03: fixups for bus
[   53.904818] pci 0000:02:00.0: PCI bridge to [bus 03-3a]
[   53.905881] pci 0000:02:00.0:   bridge window [mem 0xe0000000-0xf60fffff]
[   53.906932] pci 0000:02:00.0:   bridge window [mem 0xb0000000-0xd1ffffff 64bit pref]
[   53.907970] pci 0000:03:00.0: scanning [bus 04-04] behind bridge, pass 0
[   53.909174] pci_bus 0000:04: scanning bus
[   53.910268] pci_bus 0000:04: fixups for bus
[   53.911283] pci 0000:03:00.0: PCI bridge to [bus 04]
[   53.912326] pci 0000:03:00.0:   bridge window [mem 0xf6000000-0xf60fffff]
[   53.913366] pci_bus 0000:04: bus scan returning with max=04
[   53.914386] pci 0000:03:03.0: scanning [bus 05-2f] behind bridge, pass 0
[   53.915580] pci_bus 0000:05: scanning bus
[   53.916649] pci_bus 0000:05: fixups for bus
[   53.917648] pci 0000:03:03.0: PCI bridge to [bus 05-2f]
[   53.918676] pci 0000:03:03.0:   bridge window [mem 0xe0000000-0xedffffff]
[   53.919712] pci 0000:03:03.0:   bridge window [mem 0xb0000000-0xc9ffffff 64bit pref]
[   53.920721] pci_bus 0000:05: bus scan returning with max=05
[   53.921738] pci 0000:03:04.0: scanning [bus 30-38] behind bridge, pass 0
[   53.922921] pci_bus 0000:30: scanning bus
[   53.923986] pci_bus 0000:30: fixups for bus
[   53.924984] pci 0000:03:04.0: PCI bridge to [bus 30-38]
[   53.926010] pci 0000:03:04.0:   bridge window [mem 0xee000000-0xf5ffffff]
[   53.927044] pci 0000:03:04.0:   bridge window [mem 0xca000000-0xd1ffffff 64bit pref]
[   53.928048] pci_bus 0000:30: bus scan returning with max=30
[   53.929071] pci 0000:03:05.0: scanning [bus 39-39] behind bridge, pass 0
[   53.930256] pci_bus 0000:39: scanning bus
[   53.931632] pci_bus 0000:39: fixups for bus
[   53.932878] pci 0000:03:05.0: PCI bridge to [bus 39]
[   53.933930] pci_bus 0000:39: bus scan returning with max=39
[   53.934951] pci 0000:03:06.0: scanning [bus 3a-3a] behind bridge, pass 0
[   53.936142] pci_bus 0000:3a: scanning bus
[   53.937216] pci_bus 0000:3a: fixups for bus
[   53.938218] pci 0000:03:06.0: PCI bridge to [bus 3a]
[   53.939265] pci_bus 0000:3a: bus scan returning with max=3a
[   53.940292] pci 0000:03:00.0: scanning [bus 04-04] behind bridge, pass 1
[   53.941337] pci 0000:03:03.0: scanning [bus 05-2f] behind bridge, pass 1
[   53.942364] pci 0000:03:04.0: scanning [bus 30-38] behind bridge, pass 1
[   53.943382] pci 0000:03:05.0: scanning [bus 39-39] behind bridge, pass 1
[   53.944391] pci 0000:03:06.0: scanning [bus 3a-3a] behind bridge, pass 1
[   53.945380] pci_bus 0000:03: bus scan returning with max=3a
[   53.946372] pci 0000:02:00.0: scanning [bus 03-3a] behind bridge, pass 1
[   53.947374] pci_bus 0000:03: Allocating resources
[   53.948445] pci 0000:03:00.0: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
[   53.949467] pci 0000:03:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
[   53.950551] pci 0000:03:03.0: bridge window [io  0x1000-0x0fff] to [bus 05-2f] add_size 1000
[   53.951628] pci 0000:03:04.0: bridge window [io  0x1000-0x0fff] to [bus 30-38] add_size 1000
[   53.952708] pci 0000:03:05.0: bridge window [io  0x1000-0x0fff] to [bus 39] add_size 1000
[   53.953738] pci 0000:03:05.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000
[   53.954777] pci 0000:03:05.0: bridge window [mem 0x00100000-0x000fffff] to [bus 39] add_size 200000
[   53.955855] pci 0000:03:06.0: bridge window [io  0x1000-0x0fff] to [bus 3a] add_size 1000
[   53.956907] pci 0000:03:06.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 3a] add_size 200000
[   53.957976] pci 0000:03:06.0: bridge window [mem 0x00100000-0x000fffff] to [bus 3a] add_size 200000
[   53.959069] pci 0000:03:00.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[   53.960130] pci 0000:03:03.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[   53.961164] pci 0000:03:04.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[   53.962194] pci 0000:03:05.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[   53.963210] pci 0000:03:06.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[   53.964209] pci 0000:02:00.0: bridge window [io  0x1000-0x0fff] to [bus 03-3a] add_size 5000
[   53.965231] pci 0000:02:00.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 5000
[   53.966252] pci 0000:02:00.0: BAR 7: can't assign io (size 0x5000)
[   53.967263] pci 0000:02:00.0: BAR 7: can't assign io (size 0x5000)
[   53.968255] pci 0000:03:00.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[   53.969288] pci 0000:03:05.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[   53.970322] pci 0000:03:05.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[   53.971362] pci 0000:03:06.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[   53.972408] pci 0000:03:06.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[   53.973450] pci 0000:03:00.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[   53.974493] pci 0000:03:03.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[   53.975516] pci 0000:03:04.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[   53.976540] pci 0000:03:05.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[   53.977545] pci 0000:03:06.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[   53.978531] pci 0000:03:00.0: BAR 9: can't assign mem pref (size 0x200000)
[   53.979521] pci 0000:03:05.0: BAR 8: can't assign mem (size 0x200000)
[   53.980494] pci 0000:03:05.0: BAR 9: can't assign mem pref (size 0x200000)
[   53.981469] pci 0000:03:06.0: BAR 8: can't assign mem (size 0x200000)
[   53.982442] pci 0000:03:06.0: BAR 9: can't assign mem pref (size 0x200000)
[   53.983405] pci 0000:03:00.0: BAR 7: can't assign io (size 0x1000)
[   53.984357] pci 0000:03:03.0: BAR 7: can't assign io (size 0x1000)
[   53.985307] pci 0000:03:04.0: BAR 7: can't assign io (size 0x1000)
[   53.986251] pci 0000:03:05.0: BAR 7: can't assign io (size 0x1000)
[   53.987190] pci 0000:03:06.0: BAR 7: can't assign io (size 0x1000)
[   53.988128] pci 0000:03:06.0: BAR 8: can't assign mem (size 0x200000)
[   53.989044] pci 0000:03:06.0: BAR 9: can't assign mem pref (size 0x200000)
[   53.989948] pci 0000:03:06.0: BAR 7: can't assign io (size 0x1000)
[   53.990838] pci 0000:03:05.0: BAR 8: can't assign mem (size 0x200000)
[   53.991707] pci 0000:03:05.0: BAR 9: can't assign mem pref (size 0x200000)
[   53.992555] pci 0000:03:05.0: BAR 7: can't assign io (size 0x1000)
[   53.993375] pci 0000:03:04.0: BAR 7: can't assign io (size 0x1000)
[   53.994196] pci 0000:03:03.0: BAR 7: can't assign io (size 0x1000)
[   53.995012] pci 0000:03:00.0: BAR 9: can't assign mem pref (size 0x200000)
[   53.995813] pci 0000:03:00.0: BAR 7: can't assign io (size 0x1000)
[   53.996603] pci 0000:03:00.0: PCI bridge to [bus 04]
[   53.997392] pci 0000:03:00.0:   bridge window [mem 0xf6000000-0xf60fffff]
[   53.998192] pci 0000:03:03.0: PCI bridge to [bus 05-2f]
[   53.998977] pci 0000:03:03.0:   bridge window [mem 0xe0000000-0xedffffff]
[   53.999755] pci 0000:03:03.0:   bridge window [mem 0xb0000000-0xc9ffffff 64bit pref]
[   54.000554] pci 0000:03:04.0: PCI bridge to [bus 30-38]
[   54.001353] pci 0000:03:04.0:   bridge window [mem 0xee000000-0xf5ffffff]
[   54.002175] pci 0000:03:04.0:   bridge window [mem 0xca000000-0xd1ffffff 64bit pref]
[   54.003022] pci 0000:03:05.0: PCI bridge to [bus 39]
[   54.003866] pci 0000:03:06.0: PCI bridge to [bus 3a]
[   54.004687] pci 0000:02:00.0: PCI bridge to [bus 03-3a]
[   54.005457] pci 0000:02:00.0:   bridge window [mem 0xe0000000-0xf60fffff]
[   54.006254] pci 0000:02:00.0:   bridge window [mem 0xb0000000-0xd1ffffff 64bit pref]
[   54.007613] pcieport 0000:00:1c.4: enabling bus mastering
[   54.008516] pcieport 0000:02:00.0: irq 43 for MSI/MSI-X
[   54.009717] pcieport 0000:03:00.0: irq 44 for MSI/MSI-X
[   54.010855] pcieport 0000:03:03.0: irq 45 for MSI/MSI-X
[   54.012000] pcieport 0000:03:04.0: irq 46 for MSI/MSI-X
[   54.013114] pcieport 0000:03:05.0: irq 47 for MSI/MSI-X
[   54.014221] pcieport 0000:03:06.0: irq 48 for MSI/MSI-X
[   57.433748] acpiphp_glue: hotplug_event: Bus check notify on \_SB_.PCI0.RP05
[   57.434473] acpiphp_glue: hotplug_event: re-enumerating slots under \_SB_.PCI0.RP05
[   57.435267] pcieport 0000:02:00.0: scanning [bus 03-3a] behind bridge, pass 0
[   57.436020] pci_bus 0000:03: scanning bus
[   57.436883] pcieport 0000:03:00.0: scanning [bus 04-04] behind bridge, pass 0
[   57.437658] pci_bus 0000:04: scanning bus
[   57.438433] pci_bus 0000:04: bus scan returning with max=04
[   57.439216] pcieport 0000:03:03.0: scanning [bus 05-2f] behind bridge, pass 0
[   57.440019] pci_bus 0000:05: scanning bus
[   57.440876] pci 0000:05:00.0: [8086:1513] type 01 class 0x060400
[   57.441845] pci 0000:05:00.0: calling pci_fixup_transparent_bridge+0x0/0x30
[   57.442840] pci 0000:05:00.0: supports D1 D2
[   57.443688] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[   57.444577] pci 0000:05:00.0: PME# disabled
[   57.445609] pci 0000:05:00.0: scanning [bus 06-2f] behind bridge, pass 0
[   57.446701] pci_bus 0000:06: scanning bus
[   57.447717] pci 0000:06:03.0: [8086:1513] type 01 class 0x060400
[   57.448786] pci 0000:06:03.0: calling pci_fixup_transparent_bridge+0x0/0x30
[   57.449868] pci 0000:06:03.0: supports D1 D2
[   57.450797] pci 0000:06:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[   57.451775] pci 0000:06:03.0: PME# disabled
[   57.452880] pci 0000:06:04.0: [8086:1513] type 01 class 0x060400
[   57.454037] pci 0000:06:04.0: calling pci_fixup_transparent_bridge+0x0/0x30
[   57.455160] pci 0000:06:04.0: supports D1 D2
[   57.456124] pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[   57.457120] pci 0000:06:04.0: PME# disabled
[   57.458225] pci 0000:06:05.0: [8086:1513] type 01 class 0x060400
[   57.459372] pci 0000:06:05.0: calling pci_fixup_transparent_bridge+0x0/0x30
[   57.460501] pci 0000:06:05.0: supports D1 D2
[   57.461463] pci 0000:06:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[   57.462466] pci 0000:06:05.0: PME# disabled
[   57.463626] pci_bus 0000:06: fixups for bus
[   57.465217] pci 0000:05:00.0: PCI bridge to [bus 06-2f]
[   57.466617] pci 0000:05:00.0:   bridge window [mem 0xe0000000-0xedffffff]
[   57.468020] pci 0000:05:00.0:   bridge window [mem 0xb0000000-0xc9ffffff 64bit pref]
[   57.469415] pci 0000:06:03.0: scanning [bus 07-07] behind bridge, pass 0
[   57.470938] pci_bus 0000:07: scanning bus
[   57.472040] pci 0000:07:00.0: [1b4b:9182] type 00 class 0x010601
[   57.473116] pci 0000:07:00.0: reg 0x10: [io  0x8000-0x8007]
[   57.474185] pci 0000:07:00.0: reg 0x14: [io  0x8040-0x8043]
[   57.475258] pci 0000:07:00.0: reg 0x18: [io  0x8100-0x8107]
[   57.476334] pci 0000:07:00.0: reg 0x1c: [io  0x8140-0x8143]
[   57.477415] pci 0000:07:00.0: reg 0x20: [io  0x800000-0x80000f]
[   57.478476] pci 0000:07:00.0: reg 0x24: [mem 0xe0100000-0xe01001ff]
[   57.479537] pci 0000:07:00.0: reg 0x30: [mem 0xe0120000-0xe013ffff pref]
[   57.480713] pci 0000:07:00.0: PME# supported from D3hot
[   57.481715] pci 0000:07:00.0: PME# disabled
[   57.482867] pci_bus 0000:07: fixups for bus
[   57.483839] pci 0000:06:03.0: PCI bridge to [bus 07]
[   57.484813] pci 0000:06:03.0:   bridge window [io  0xf000-0xe0000fff]
[   57.485779] pci 0000:06:03.0:   bridge window [mem 0xe0000000-0xe3ffffff]
[   57.486737] pci 0000:06:03.0:   bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
[   57.487679] pci_bus 0000:07: bus scan returning with max=07
[   57.488623] pci 0000:06:04.0: scanning [bus 08-2e] behind bridge, pass 0
[   57.489683] pci_bus 0000:08: scanning bus
[   57.490680] pci_bus 0000:08: fixups for bus
[   57.491614] pci 0000:06:04.0: PCI bridge to [bus 08-2e]
[   57.492572] pci 0000:06:04.0:   bridge window [mem 0xe4000000-0xedffffff]
[   57.493520] pci 0000:06:04.0:   bridge window [mem 0xc0000000-0xc9ffffff 64bit pref]
[   57.494448] pci_bus 0000:08: bus scan returning with max=08
[   57.495381] pci 0000:06:05.0: scanning [bus 2f-2f] behind bridge, pass 0
[   57.496429] pci_bus 0000:2f: scanning bus
[   57.497414] pci_bus 0000:2f: fixups for bus
[   57.498334] pci 0000:06:05.0: PCI bridge to [bus 2f]
[   57.499292] pci_bus 0000:2f: bus scan returning with max=2f
[   57.500226] pci 0000:06:03.0: scanning [bus 07-07] behind bridge, pass 1
[   57.501180] pci 0000:06:04.0: scanning [bus 08-2e] behind bridge, pass 1
[   57.502117] pci 0000:06:05.0: scanning [bus 2f-2f] behind bridge, pass 1
[   57.503042] pci_bus 0000:06: bus scan returning with max=2f
[   57.503964] pci 0000:05:00.0: scanning [bus 06-2f] behind bridge, pass 1
[   57.504900] pci_bus 0000:05: bus scan returning with max=2f
[   57.505830] pcieport 0000:03:04.0: scanning [bus 30-38] behind bridge, pass 0
[   57.506775] pci_bus 0000:30: scanning bus
[   57.507714] pci_bus 0000:30: bus scan returning with max=30
[   57.508667] pcieport 0000:03:05.0: scanning [bus 39-39] behind bridge, pass 0
[   57.509636] pci_bus 0000:39: scanning bus
[   57.510598] pci_bus 0000:39: bus scan returning with max=39
[   57.511573] pcieport 0000:03:06.0: scanning [bus 3a-3a] behind bridge, pass 0
[   57.512552] pci_bus 0000:3a: scanning bus
[   57.513520] pci_bus 0000:3a: bus scan returning with max=3a
[   57.514493] pcieport 0000:03:00.0: scanning [bus 04-04] behind bridge, pass 1
[   57.515487] pcieport 0000:03:03.0: scanning [bus 05-2f] behind bridge, pass 1
[   57.516481] pcieport 0000:03:04.0: scanning [bus 30-38] behind bridge, pass 1
[   57.517475] pcieport 0000:03:05.0: scanning [bus 39-39] behind bridge, pass 1
[   57.518470] pcieport 0000:03:06.0: scanning [bus 3a-3a] behind bridge, pass 1
[   57.519456] pci_bus 0000:03: bus scan returning with max=3a
[   57.520444] pcieport 0000:02:00.0: scanning [bus 03-3a] behind bridge, pass 1
[   57.521455] pci_bus 0000:03: Allocating resources
[   57.522460] pci 0000:06:03.0: no compatible bridge window for [io  0xf000-0xe0000fff]
[   57.523519] pci 0000:07:00.0: BAR 5: reserving [mem 0xe0100000-0xe01001ff flags 0x40200] (d=0, p=0)
[   57.524614] pci 0000:07:00.0: BAR 0: reserving [io  0x8000-0x8007 flags 0x40101] (d=1, p=1)
[   57.525684] pci 0000:07:00.0: no compatible bridge window for [io  0x8000-0x8007]
[   57.526756] pci 0000:07:00.0: BAR 1: reserving [io  0x8040-0x8043 flags 0x40101] (d=1, p=1)
[   57.527847] pci 0000:07:00.0: no compatible bridge window for [io  0x8040-0x8043]
[   57.528949] pci 0000:07:00.0: BAR 2: reserving [io  0x8100-0x8107 flags 0x40101] (d=1, p=1)
[   57.530052] pci 0000:07:00.0: no compatible bridge window for [io  0x8100-0x8107]
[   57.531151] pci 0000:07:00.0: BAR 3: reserving [io  0x8140-0x8143 flags 0x40101] (d=1, p=1)
[   57.532252] pci 0000:07:00.0: no compatible bridge window for [io  0x8140-0x8143]
[   57.533373] pci 0000:07:00.0: BAR 4: reserving [io  0x800000-0x80000f flags 0x40101] (d=1, p=1)
[   57.534506] pci 0000:07:00.0: no compatible bridge window for [io  0x800000-0x80000f]
[   57.535671] pcieport 0000:03:00.0: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
[   57.536838] pcieport 0000:03:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
[   57.538057] pci 0000:06:04.0: bridge window [io  0x1000-0x0fff] to [bus 08-2e] add_size 1000
[   57.539261] pci 0000:06:05.0: bridge window [io  0x1000-0x0fff] to [bus 2f] add_size 1000
[   57.540429] pci 0000:06:05.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 2f] add_size 200000
[   57.541626] pci 0000:06:05.0: bridge window [mem 0x00100000-0x000fffff] to [bus 2f] add_size 200000
[   57.542840] pci 0000:06:04.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[   57.544043] pci 0000:06:05.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[   57.545222] pci 0000:05:00.0: bridge window [io  0x1000-0x1fff] to [bus 06-2f] add_size 2000
[   57.546439] pci 0000:05:00.0: res[7]=[io  0x1000-0x1fff] get_res_add_size add_size 2000
[   57.547661] pcieport 0000:03:03.0: bridge window [io  0x1000-0x1fff] to [bus 05-2f] add_size 2000
[   57.548908] pcieport 0000:03:04.0: bridge window [io  0x1000-0x0fff] to [bus 30-38] add_size 1000
[   57.550141] pcieport 0000:03:05.0: bridge window [io  0x1000-0x0fff] to [bus 39] add_size 1000
[   57.551341] pcieport 0000:03:05.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000
[   57.552554] pcieport 0000:03:05.0: bridge window [mem 0x00100000-0x000fffff] to [bus 39] add_size 200000
[   57.553767] pcieport 0000:03:06.0: bridge window [io  0x1000-0x0fff] to [bus 3a] add_size 1000
[   57.554974] pcieport 0000:03:06.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 3a] add_size 200000
[   57.556190] pcieport 0000:03:06.0: bridge window [mem 0x00100000-0x000fffff] to [bus 3a] add_size 200000
[   57.557403] pcieport 0000:03:00.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[   57.558617] pcieport 0000:03:03.0: res[7]=[io  0x1000-0x1fff] get_res_add_size add_size 2000
[   57.559809] pcieport 0000:03:04.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[   57.560981] pcieport 0000:03:05.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[   57.562135] pcieport 0000:03:06.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[   57.563267] pcieport 0000:02:00.0: bridge window [io  0x1000-0x1fff] to [bus 03-3a] add_size 6000
[   57.564420] pcieport 0000:02:00.0: res[7]=[io  0x1000-0x1fff] get_res_add_size add_size 6000
[   57.565593] pcieport 0000:02:00.0: BAR 7: can't assign io (size 0x7000)
[   57.566773] pcieport 0000:02:00.0: BAR 7: assigned [io  0x2000-0x2fff]
[   57.567960] pcieport 0000:02:00.0: BAR 7: can't assign io (size 0x1000)
[   57.569130] pcieport 0000:02:00.0: failed to add 6000 res[7]=[io  0x2000-0x2fff]
[   57.570301] pcieport 0000:03:00.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[   57.571487] pcieport 0000:03:05.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[   57.572659] pcieport 0000:03:05.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[   57.573822] pcieport 0000:03:06.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[   57.574981] pcieport 0000:03:06.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[   57.576137] pcieport 0000:03:00.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[   57.577293] pcieport 0000:03:03.0: res[7]=[io  0x1000-0x1fff] get_res_add_size add_size 2000
[   57.578429] pcieport 0000:03:04.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[   57.579544] pcieport 0000:03:05.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[   57.580638] pcieport 0000:03:06.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[   57.581704] pcieport 0000:03:00.0: BAR 9: can't assign mem pref (size 0x200000)
[   57.582766] pcieport 0000:03:05.0: BAR 8: can't assign mem (size 0x200000)
[   57.583815] pcieport 0000:03:05.0: BAR 9: can't assign mem pref (size 0x200000)
[   57.584846] pcieport 0000:03:06.0: BAR 8: can't assign mem (size 0x200000)
[   57.585854] pcieport 0000:03:06.0: BAR 9: can't assign mem pref (size 0x200000)
[   57.586845] pcieport 0000:03:00.0: BAR 7: assigned [io  0x2000-0x2fff]
[   57.587813] pcieport 0000:03:03.0: BAR 7: can't assign io (size 0x3000)
[   57.588785] pcieport 0000:03:04.0: BAR 7: can't assign io (size 0x1000)
[   57.589729] pcieport 0000:03:05.0: BAR 7: can't assign io (size 0x1000)
[   57.590660] pcieport 0000:03:06.0: BAR 7: can't assign io (size 0x1000)
[   57.591562] pcieport 0000:03:03.0: BAR 7: assigned [io  0x2000-0x2fff]
[   57.592474] pcieport 0000:03:06.0: BAR 8: can't assign mem (size 0x200000)
[   57.593378] pcieport 0000:03:06.0: BAR 9: can't assign mem pref (size 0x200000)
[   57.594267] pcieport 0000:03:06.0: BAR 7: can't assign io (size 0x1000)
[   57.595132] pcieport 0000:03:05.0: BAR 8: can't assign mem (size 0x200000)
[   57.596002] pcieport 0000:03:05.0: BAR 9: can't assign mem pref (size 0x200000)
[   57.596868] pcieport 0000:03:05.0: BAR 7: can't assign io (size 0x1000)
[   57.597718] pcieport 0000:03:04.0: BAR 7: can't assign io (size 0x1000)
[   57.598553] pcieport 0000:03:03.0: BAR 7: can't assign io (size 0x1000)
[   57.599363] pcieport 0000:03:03.0: failed to add 2000 res[7]=[io  0x2000-0x2fff]
[   57.600165] pcieport 0000:03:00.0: BAR 9: can't assign mem pref (size 0x200000)
[   57.600973] pcieport 0000:03:00.0: BAR 7: can't assign io (size 0x1000)
[   57.601754] pci 0000:05:00.0: res[7]=[io  0x1000-0x1fff] get_res_add_size add_size 2000
[   57.602570] pci 0000:05:00.0: BAR 7: can't assign io (size 0x3000)
[   57.603398] pci 0000:05:00.0: BAR 7: assigned [io  0x2000-0x2fff]
[   57.604234] pci 0000:05:00.0: BAR 7: can't assign io (size 0x1000)
[   57.605084] pci 0000:05:00.0: failed to add 2000 res[7]=[io  0x2000-0x2fff]
[   57.605923] pci 0000:06:05.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[   57.606779] pci 0000:06:05.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[   57.607636] pci 0000:06:04.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[   57.608509] pci 0000:06:05.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[   57.609369] pci 0000:06:05.0: BAR 8: can't assign mem (size 0x200000)
[   57.610229] pci 0000:06:05.0: BAR 9: can't assign mem pref (size 0x200000)
[   57.611069] pci 0000:06:03.0: BAR 7: assigned [io  0x2000-0x2fff]
[   57.611895] pci 0000:06:04.0: BAR 7: can't assign io (size 0x1000)
[   57.612714] pci 0000:06:05.0: BAR 7: can't assign io (size 0x1000)
[   57.613518] pci 0000:06:03.0: BAR 7: assigned [io  0x2000-0x2fff]
[   57.614314] pci 0000:06:05.0: BAR 8: can't assign mem (size 0x200000)
[   57.615098] pci 0000:06:05.0: BAR 9: can't assign mem pref (size 0x200000)
[   57.615885] pci 0000:06:05.0: BAR 7: can't assign io (size 0x1000)
[   57.616677] pci 0000:06:04.0: BAR 7: can't assign io (size 0x1000)
[   57.617473] pci 0000:07:00.0: BAR 4: assigned [io  0x2000-0x200f]
[   57.618292] pci 0000:07:00.0: BAR 4: set to [io  0x2000-0x200f] (PCI address [0x2000-0x200f])
[   57.619113] pci 0000:07:00.0: BAR 0: assigned [io  0x2010-0x2017]
[   57.619939] pci 0000:07:00.0: BAR 0: set to [io  0x2010-0x2017] (PCI address [0x2010-0x2017])
[   57.620777] pci 0000:07:00.0: BAR 2: assigned [io  0x2018-0x201f]
[   57.621626] pci 0000:07:00.0: BAR 2: set to [io  0x2018-0x201f] (PCI address [0x2018-0x201f])
[   57.622490] pci 0000:07:00.0: BAR 1: assigned [io  0x2020-0x2023]
[   57.623352] pci 0000:07:00.0: BAR 1: set to [io  0x2020-0x2023] (PCI address [0x2020-0x2023])
[   57.624225] pci 0000:07:00.0: BAR 3: assigned [io  0x2024-0x2027]
[   57.625118] pci 0000:07:00.0: BAR 3: set to [io  0x2024-0x2027] (PCI address [0x2024-0x2027])
[   57.626033] pci 0000:06:03.0: PCI bridge to [bus 07]
[   57.626961] pci 0000:06:03.0:   bridge window [io  0x2000-0x2fff]
[   57.627893] pci 0000:06:03.0:   bridge window [mem 0xe0000000-0xe3ffffff]
[   57.628826] pci 0000:06:03.0:   bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
[   57.629769] pci 0000:06:04.0: PCI bridge to [bus 08-2e]
[   57.630710] pci 0000:06:04.0:   bridge window [mem 0xe4000000-0xedffffff]
[   57.631660] pci 0000:06:04.0:   bridge window [mem 0xc0000000-0xc9ffffff 64bit pref]
[   57.632619] pci 0000:06:05.0: PCI bridge to [bus 2f]
[   57.633599] pci 0000:05:00.0: PCI bridge to [bus 06-2f]
[   57.634556] pci 0000:05:00.0:   bridge window [io  0x2000-0x2fff]
[   57.635539] pci 0000:05:00.0:   bridge window [mem 0xe0000000-0xedffffff]
[   57.636515] pci 0000:05:00.0:   bridge window [mem 0xb0000000-0xc9ffffff 64bit pref]
[   57.638252] pcieport 0000:05:00.0: enabling device (0106 -> 0107)
[   57.639347] pcieport 0000:05:00.0: irq 49 for MSI/MSI-X
[   57.640506] pcieport 0000:06:03.0: enabling device (0106 -> 0107)
[   57.641611] pcieport 0000:06:03.0: irq 50 for MSI/MSI-X
[   57.642877] pcieport 0000:06:04.0: irq 51 for MSI/MSI-X
[   57.644169] pcieport 0000:06:05.0: irq 52 for MSI/MSI-X
[   57.645342] ahci 0000:07:00.0: enabling device (0106 -> 0107)
[   57.646402] ahci 0000:07:00.0: irq 53 for MSI/MSI-X
[   57.647439] ahci 0000:07:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[   57.648355] ahci 0000:07:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
[   57.649690] scsi7 : ahci
[   57.650977] scsi8 : ahci
[   57.652015] ata7: SATA max UDMA/133 abar m512@0xe0100000 port 0xe0100100 irq 53
[   57.653029] ata8: SATA max UDMA/133 abar m512@0xe0100000 port 0xe0100180 irq 53
[   57.664463] acpiphp_glue: hotplug_event: Bus check notify on \_SB_.PCI0.RP05
[   57.665430] acpiphp_glue: hotplug_event: re-enumerating slots under \_SB_.PCI0.RP05
[   57.666453] pcieport 0000:02:00.0: scanning [bus 03-3a] behind bridge, pass 0
[   57.667441] pci_bus 0000:03: scanning bus
[   57.668479] pcieport 0000:03:00.0: scanning [bus 04-04] behind bridge, pass 0
[   57.669500] pci_bus 0000:04: scanning bus
[   57.670526] pci_bus 0000:04: bus scan returning with max=04
[   57.671559] pcieport 0000:03:03.0: scanning [bus 05-2f] behind bridge, pass 0
[   57.672602] pci_bus 0000:05: scanning bus
[   57.673629] pcieport 0000:05:00.0: scanning [bus 06-2f] behind bridge, pass 0
[   57.674680] pci_bus 0000:06: scanning bus
[   57.675812] pcieport 0000:06:03.0: scanning [bus 07-07] behind bridge, pass 0
[   57.676872] pci_bus 0000:07: scanning bus
[   57.677911] pci_bus 0000:07: bus scan returning with max=07
[   57.678956] pcieport 0000:06:04.0: scanning [bus 08-2e] behind bridge, pass 0
[   57.680014] pci_bus 0000:08: scanning bus
[   57.681055] pci_bus 0000:08: bus scan returning with max=08
[   57.682090] pcieport 0000:06:05.0: scanning [bus 2f-2f] behind bridge, pass 0
[   57.683148] pci_bus 0000:2f: scanning bus
[   57.684201] pci_bus 0000:2f: bus scan returning with max=2f
[   57.685267] pcieport 0000:06:03.0: scanning [bus 07-07] behind bridge, pass 1
[   57.686349] pcieport 0000:06:04.0: scanning [bus 08-2e] behind bridge, pass 1
[   57.687419] pcieport 0000:06:05.0: scanning [bus 2f-2f] behind bridge, pass 1
[   57.688481] pci_bus 0000:06: bus scan returning with max=2f
[   57.689538] pcieport 0000:05:00.0: scanning [bus 06-2f] behind bridge, pass 1
[   57.690622] pci_bus 0000:05: bus scan returning with max=2f
[   57.691702] pcieport 0000:03:04.0: scanning [bus 30-38] behind bridge, pass 0
[   57.692799] pci_bus 0000:30: scanning bus
[   57.693896] pci_bus 0000:30: bus scan returning with max=30
[   57.694990] pcieport 0000:03:05.0: scanning [bus 39-39] behind bridge, pass 0
[   57.696104] pci_bus 0000:39: scanning bus
[   57.697215] pci_bus 0000:39: bus scan returning with max=39
[   57.698335] pcieport 0000:03:06.0: scanning [bus 3a-3a] behind bridge, pass 0
[   57.699483] pci_bus 0000:3a: scanning bus
[   57.700636] pci_bus 0000:3a: bus scan returning with max=3a
[   57.701793] pcieport 0000:03:00.0: scanning [bus 04-04] behind bridge, pass 1
[   57.702972] pcieport 0000:03:03.0: scanning [bus 05-2f] behind bridge, pass 1
[   57.704130] pcieport 0000:03:04.0: scanning [bus 30-38] behind bridge, pass 1
[   57.705267] pcieport 0000:03:05.0: scanning [bus 39-39] behind bridge, pass 1
[   57.706379] pcieport 0000:03:06.0: scanning [bus 3a-3a] behind bridge, pass 1
[   57.707489] pci_bus 0000:03: bus scan returning with max=3a
[   57.708588] pcieport 0000:02:00.0: scanning [bus 03-3a] behind bridge, pass 1
[   57.709719] pci_bus 0000:03: Allocating resources
[   57.710900] pcieport 0000:03:00.0: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
[   57.712049] pcieport 0000:03:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
[   57.713234] pcieport 0000:06:04.0: bridge window [io  0x1000-0x0fff] to [bus 08-2e] add_size 1000
[   57.714398] pcieport 0000:06:05.0: bridge window [io  0x1000-0x0fff] to [bus 2f] add_size 1000
[   57.715524] pcieport 0000:06:05.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 2f] add_size 200000
[   57.716658] pcieport 0000:06:05.0: bridge window [mem 0x00100000-0x000fffff] to [bus 2f] add_size 200000
[   57.717837] pcieport 0000:03:04.0: bridge window [io  0x1000-0x0fff] to [bus 30-38] add_size 1000
[   57.718982] pcieport 0000:03:05.0: bridge window [io  0x1000-0x0fff] to [bus 39] add_size 1000
[   57.720103] pcieport 0000:03:05.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000
[   57.721226] pcieport 0000:03:05.0: bridge window [mem 0x00100000-0x000fffff] to [bus 39] add_size 200000
[   57.722345] pcieport 0000:03:06.0: bridge window [io  0x1000-0x0fff] to [bus 3a] add_size 1000
[   57.723449] pcieport 0000:03:06.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 3a] add_size 200000
[   57.724567] pcieport 0000:03:06.0: bridge window [mem 0x00100000-0x000fffff] to [bus 3a] add_size 200000
[   57.725698] pcieport 0000:03:00.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[   57.726822] pcieport 0000:03:05.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[   57.727936] pcieport 0000:03:05.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[   57.729062] pcieport 0000:03:06.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[   57.730178] pcieport 0000:03:06.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[   57.731289] pcieport 0000:03:00.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[   57.732414] pcieport 0000:03:04.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[   57.733514] pcieport 0000:03:05.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[   57.734609] pcieport 0000:03:06.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[   57.735702] pcieport 0000:03:00.0: BAR 9: can't assign mem pref (size 0x200000)
[   57.736792] pcieport 0000:03:05.0: BAR 8: can't assign mem (size 0x200000)
[   57.737869] pcieport 0000:03:05.0: BAR 9: can't assign mem pref (size 0x200000)
[   57.738933] pcieport 0000:03:06.0: BAR 8: can't assign mem (size 0x200000)
[   57.739984] pcieport 0000:03:06.0: BAR 9: can't assign mem pref (size 0x200000)
[   57.741022] pcieport 0000:03:00.0: BAR 7: can't assign io (size 0x1000)
[   57.742051] pcieport 0000:03:04.0: BAR 7: can't assign io (size 0x1000)
[   57.743054] pcieport 0000:03:05.0: BAR 7: can't assign io (size 0x1000)
[   57.744033] pcieport 0000:03:06.0: BAR 7: can't assign io (size 0x1000)
[   57.744999] pcieport 0000:03:06.0: BAR 8: can't assign mem (size 0x200000)
[   57.745957] pcieport 0000:03:06.0: BAR 9: can't assign mem pref (size 0x200000)
[   57.746902] pcieport 0000:03:06.0: BAR 7: can't assign io (size 0x1000)
[   57.747843] pcieport 0000:03:05.0: BAR 8: can't assign mem (size 0x200000)
[   57.748774] pcieport 0000:03:05.0: BAR 9: can't assign mem pref (size 0x200000)
[   57.749710] pcieport 0000:03:05.0: BAR 7: can't assign io (size 0x1000)
[   57.750648] pcieport 0000:03:04.0: BAR 7: can't assign io (size 0x1000)
[   57.751585] pcieport 0000:03:00.0: BAR 9: can't assign mem pref (size 0x200000)
[   57.752532] pcieport 0000:03:00.0: BAR 7: can't assign io (size 0x1000)
[   57.753469] pcieport 0000:06:05.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[   57.754422] pcieport 0000:06:05.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[   57.755372] pcieport 0000:06:04.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[   57.756315] pcieport 0000:06:05.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[   57.757233] pcieport 0000:06:05.0: BAR 8: can't assign mem (size 0x200000)
[   57.758137] pcieport 0000:06:05.0: BAR 9: can't assign mem pref (size 0x200000)
[   57.759044] pcieport 0000:06:04.0: BAR 7: can't assign io (size 0x1000)
[   57.759927] pcieport 0000:06:05.0: BAR 7: can't assign io (size 0x1000)
[   57.760801] pcieport 0000:06:05.0: BAR 8: can't assign mem (size 0x200000)
[   57.761657] pcieport 0000:06:05.0: BAR 9: can't assign mem pref (size 0x200000)
[   57.762514] pcieport 0000:06:05.0: BAR 7: can't assign io (size 0x1000)
[   57.763350] pcieport 0000:06:04.0: BAR 7: can't assign io (size 0x1000)
[   57.967245] ata7: SATA link down (SStatus 0 SControl 320)
[   59.870494] ata8: SATA link down (SStatus 111 SControl 320)
[   59.883093] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
[   59.883940] ata8: irq_stat 0x80000040, connection status changed
[   59.884770] ata8: SError: { CommWake DevExch }
[   59.885575] ata8: hard resetting link
[   62.143952] ata8: COMRESET failed (errno=-32)
[   62.144738] ata8: reset failed (errno=-32), retrying in 8 secs
[   62.450064] acpiphp_glue: hotplug_event: Bus check notify on \_SB_.PCI0.RP05
[   62.450861] acpiphp_glue: hotplug_event: re-enumerating slots under \_SB_.PCI0.RP05
[   62.451716] pcieport 0000:02:00.0: scanning [bus 03-3a] behind bridge, pass 0
[   62.452551] pci_bus 0000:03: scanning bus
[   62.453448] pcieport 0000:03:00.0: scanning [bus 04-04] behind bridge, pass 0
[   62.454306] pci_bus 0000:04: scanning bus
[   62.455160] pci_bus 0000:04: bus scan returning with max=04
[   62.456024] pcieport 0000:03:03.0: scanning [bus 05-2f] behind bridge, pass 0
[   62.456913] pci_bus 0000:05: scanning bus
[   62.457800] pcieport 0000:05:00.0: scanning [bus 06-2f] behind bridge, pass 0
[   62.458717] pci_bus 0000:06: scanning bus
[   62.459734] pcieport 0000:06:03.0: scanning [bus 07-07] behind bridge, pass 0
[   62.460699] pci_bus 0000:07: scanning bus
[   62.461665] pci_bus 0000:07: bus scan returning with max=07
[   62.462651] pcieport 0000:06:04.0: scanning [bus 08-2e] behind bridge, pass 0
[   62.463657] pci_bus 0000:08: scanning bus
[   62.464713] pci 0000:08:00.0: [8086:1549] type 01 class 0x060400
[   62.465878] pci 0000:08:00.0: calling pci_fixup_transparent_bridge+0x0/0x30
[   62.467059] pci 0000:08:00.0: supports D1 D2
[   62.468083] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[   62.469148] pci 0000:08:00.0: PME# disabled
[   62.481526] pci 0000:08:00.0: scanning [bus 09-2e] behind bridge, pass 0
[   62.482766] pci_bus 0000:09: scanning bus
[   62.483922] pci 0000:09:00.0: [8086:1549] type 01 class 0x060400
[   62.485134] pci 0000:09:00.0: calling pci_fixup_transparent_bridge+0x0/0x30
[   62.486332] pci 0000:09:00.0: supports D1 D2
[   62.487383] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[   62.488451] pci 0000:09:00.0: PME# disabled
[   62.489735] pci_bus 0000:09: fixups for bus
[   62.490815] pci 0000:08:00.0: PCI bridge to [bus 09-2e]
[   62.491917] pci 0000:08:00.0:   bridge window [mem 0xe4000000-0xedffffff]
[   62.493025] pci 0000:08:00.0:   bridge window [mem 0xc0000000-0xc9ffffff 64bit pref]
[   62.494125] pci 0000:09:00.0: scanning [bus 0a-0a] behind bridge, pass 0
[   62.495374] pci_bus 0000:0a: scanning bus
[   62.496635] pci 0000:0a:00.0: [14e4:1682] type 00 class 0x020000
[   62.497837] pci 0000:0a:00.0: reg 0x10: [mem 0xc0000000-0xc000ffff 64bit pref]
[   62.499036] pci 0000:0a:00.0: reg 0x18: [mem 0xc0010000-0xc001ffff 64bit pref]
[   62.500279] pci 0000:0a:00.0: reg 0x30: [mem 0xe4100000-0xe410ffff pref]
[   62.501668] pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold
[   62.502775] pci 0000:0a:00.0: PME# disabled
[   62.504013] pci_bus 0000:0a: fixups for bus
[   62.505129] pci 0000:09:00.0: PCI bridge to [bus 0a]
[   62.506238] pci 0000:09:00.0:   bridge window [io  0xf000-0xe4000fff]
[   62.507331] pci 0000:09:00.0:   bridge window [mem 0xe4000000-0xe5ffffff]
[   62.508429] pci 0000:09:00.0:   bridge window [mem 0xc0000000-0xc1ffffff 64bit pref]
[   62.509494] pci_bus 0000:0a: bus scan returning with max=0a
[   62.510558] pci 0000:09:00.0: scanning [bus 0a-0a] behind bridge, pass 1
[   62.511629] pci_bus 0000:09: bus scan returning with max=0a
[   62.512692] pci 0000:08:00.0: scanning [bus 09-2e] behind bridge, pass 1
[   62.513776] pci_bus 0000:08: bus scan returning with max=2e
[   62.514848] pcieport 0000:06:05.0: scanning [bus 2f-2f] behind bridge, pass 0
[   62.515927] pci_bus 0000:2f: scanning bus
[   62.516987] pci_bus 0000:2f: bus scan returning with max=2f
[   62.518050] pcieport 0000:06:03.0: scanning [bus 07-07] behind bridge, pass 1
[   62.519120] pcieport 0000:06:04.0: scanning [bus 08-2e] behind bridge, pass 1
[   62.520174] pcieport 0000:06:05.0: scanning [bus 2f-2f] behind bridge, pass 1
[   62.521206] pci_bus 0000:06: bus scan returning with max=2f
[   62.522229] pcieport 0000:05:00.0: scanning [bus 06-2f] behind bridge, pass 1
[   62.523260] pci_bus 0000:05: bus scan returning with max=2f
[   62.524286] pcieport 0000:03:04.0: scanning [bus 30-38] behind bridge, pass 0
[   62.525325] pci_bus 0000:30: scanning bus
[   62.526358] pci_bus 0000:30: bus scan returning with max=30
[   62.527396] pcieport 0000:03:05.0: scanning [bus 39-39] behind bridge, pass 0
[   62.528450] pci_bus 0000:39: scanning bus
[   62.529496] pci_bus 0000:39: bus scan returning with max=39
[   62.530544] pcieport 0000:03:06.0: scanning [bus 3a-3a] behind bridge, pass 0
[   62.531600] pci_bus 0000:3a: scanning bus
[   62.532647] pci_bus 0000:3a: bus scan returning with max=3a
[   62.533700] pcieport 0000:03:00.0: scanning [bus 04-04] behind bridge, pass 1
[   62.534767] pcieport 0000:03:03.0: scanning [bus 05-2f] behind bridge, pass 1
[   62.535824] pcieport 0000:03:04.0: scanning [bus 30-38] behind bridge, pass 1
[   62.536875] pcieport 0000:03:05.0: scanning [bus 39-39] behind bridge, pass 1
[   62.537919] pcieport 0000:03:06.0: scanning [bus 3a-3a] behind bridge, pass 1
[   62.538945] pci_bus 0000:03: bus scan returning with max=3a
[   62.539979] pcieport 0000:02:00.0: scanning [bus 03-3a] behind bridge, pass 1
[   62.541023] pci_bus 0000:03: Allocating resources
[   62.542053] pci 0000:09:00.0: no compatible bridge window for [io  0xf000-0xe4000fff]
[   62.543138] pci 0000:0a:00.0: BAR 0: reserving [mem 0xc0000000-0xc000ffff flags 0x14220c] (d=0, p=0)
[   62.544203] pci 0000:0a:00.0: BAR 2: reserving [mem 0xc0010000-0xc001ffff flags 0x14220c] (d=0, p=0)
[   62.545335] pcieport 0000:03:00.0: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
[   62.546420] pcieport 0000:03:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
[   62.547572] pci 0000:09:00.0: bridge window [io  0x1000-0x0fff] to [bus 0a] add_size 1000
[   62.548721] pci 0000:09:00.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[   62.549857] pci 0000:08:00.0: bridge window [io  0x1000-0x0fff] to [bus 09-2e] add_size 1000
[   62.551025] pci 0000:08:00.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[   62.552178] pcieport 0000:06:04.0: bridge window [io  0x1000-0x0fff] to [bus 08-2e] add_size 1000
[   62.553381] pcieport 0000:06:05.0: bridge window [io  0x1000-0x0fff] to [bus 2f] add_size 1000
[   62.554565] pcieport 0000:06:05.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 2f] add_size 200000
[   62.555754] pcieport 0000:06:05.0: bridge window [mem 0x00100000-0x000fffff] to [bus 2f] add_size 200000
[   62.556971] pcieport 0000:03:04.0: bridge window [io  0x1000-0x0fff] to [bus 30-38] add_size 1000
[   62.558158] pcieport 0000:03:05.0: bridge window [io  0x1000-0x0fff] to [bus 39] add_size 1000
[   62.559319] pcieport 0000:03:05.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000
[   62.560491] pcieport 0000:03:05.0: bridge window [mem 0x00100000-0x000fffff] to [bus 39] add_size 200000
[   62.561660] pcieport 0000:03:06.0: bridge window [io  0x1000-0x0fff] to [bus 3a] add_size 1000
[   62.562813] pcieport 0000:03:06.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 3a] add_size 200000
[   62.563990] pcieport 0000:03:06.0: bridge window [mem 0x00100000-0x000fffff] to [bus 3a] add_size 200000
[   62.565169] pcieport 0000:03:00.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[   62.566363] pcieport 0000:03:05.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[   62.567569] pcieport 0000:03:05.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[   62.568778] pcieport 0000:03:06.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[   62.569976] pcieport 0000:03:06.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[   62.571174] pcieport 0000:03:00.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[   62.572372] pcieport 0000:03:04.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[   62.573545] pcieport 0000:03:05.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[   62.574703] pcieport 0000:03:06.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[   62.575837] pcieport 0000:03:00.0: BAR 9: can't assign mem pref (size 0x200000)
[   62.576965] pcieport 0000:03:05.0: BAR 8: can't assign mem (size 0x200000)
[   62.578092] pcieport 0000:03:05.0: BAR 9: can't assign mem pref (size 0x200000)
[   62.579203] pcieport 0000:03:06.0: BAR 8: can't assign mem (size 0x200000)
[   62.580300] pcieport 0000:03:06.0: BAR 9: can't assign mem pref (size 0x200000)
[   62.581392] pcieport 0000:03:00.0: BAR 7: can't assign io (size 0x1000)
[   62.582469] pcieport 0000:03:04.0: BAR 7: can't assign io (size 0x1000)
[   62.583539] pcieport 0000:03:05.0: BAR 7: can't assign io (size 0x1000)
[   62.584605] pcieport 0000:03:06.0: BAR 7: can't assign io (size 0x1000)
[   62.585671] pcieport 0000:03:06.0: BAR 8: can't assign mem (size 0x200000)
[   62.586742] pcieport 0000:03:06.0: BAR 9: can't assign mem pref (size 0x200000)
[   62.587801] pcieport 0000:03:06.0: BAR 7: can't assign io (size 0x1000)
[   62.588838] pcieport 0000:03:05.0: BAR 8: can't assign mem (size 0x200000)
[   62.589869] pcieport 0000:03:05.0: BAR 9: can't assign mem pref (size 0x200000)
[   62.590884] pcieport 0000:03:05.0: BAR 7: can't assign io (size 0x1000)
[   62.591875] pcieport 0000:03:04.0: BAR 7: can't assign io (size 0x1000)
[   62.592865] pcieport 0000:03:00.0: BAR 9: can't assign mem pref (size 0x200000)
[   62.593831] pcieport 0000:03:00.0: BAR 7: can't assign io (size 0x1000)
[   62.594780] pcieport 0000:06:05.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[   62.595730] pcieport 0000:06:05.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[   62.596680] pcieport 0000:06:04.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[   62.597628] pcieport 0000:06:05.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[   62.598553] pcieport 0000:06:05.0: BAR 8: can't assign mem (size 0x200000)
[   62.599462] pcieport 0000:06:05.0: BAR 9: can't assign mem pref (size 0x200000)
[   62.600371] pcieport 0000:06:04.0: BAR 7: can't assign io (size 0x1000)
[   62.601264] pcieport 0000:06:05.0: BAR 7: can't assign io (size 0x1000)
[   62.602134] pcieport 0000:06:05.0: BAR 8: can't assign mem (size 0x200000)
[   62.602994] pcieport 0000:06:05.0: BAR 9: can't assign mem pref (size 0x200000)
[   62.603854] pcieport 0000:06:05.0: BAR 7: can't assign io (size 0x1000)
[   62.604690] pcieport 0000:06:04.0: BAR 7: can't assign io (size 0x1000)
[   62.605514] pci 0000:08:00.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[   62.606348] pci 0000:08:00.0: BAR 7: can't assign io (size 0x1000)
[   62.607164] pci 0000:08:00.0: BAR 7: can't assign io (size 0x1000)
[   62.607973] pci 0000:09:00.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[   62.608780] pci 0000:09:00.0: BAR 7: can't assign io (size 0x1000)
[   62.609583] pci 0000:09:00.0: BAR 7: can't assign io (size 0x1000)
[   62.610367] pci 0000:09:00.0: PCI bridge to [bus 0a]
[   62.611142] pci 0000:09:00.0:   bridge window [mem 0xe4000000-0xe5ffffff]
[   62.611923] pci 0000:09:00.0:   bridge window [mem 0xc0000000-0xc1ffffff 64bit pref]
[   62.612692] pci 0000:08:00.0: PCI bridge to [bus 09-2e]
[   62.613467] pci 0000:08:00.0:   bridge window [mem 0xe4000000-0xedffffff]
[   62.614258] pci 0000:08:00.0:   bridge window [mem 0xc0000000-0xc9ffffff 64bit pref]
[   62.616427] pcieport 0000:08:00.0: irq 54 for MSI/MSI-X
[   62.617623] pcieport 0000:09:00.0: irq 55 for MSI/MSI-X
[   62.618726] tg3.c:v3.134 (Sep 16, 2013)
[   62.656386] tg3 0000:0a:00.0 eth0: Tigon3 [partno(BCM957762) rev 57766000] (PCI Express) MAC address a8:20:66:3d:4b:b4
[   62.657513] tg3 0000:0a:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[   62.658579] tg3 0000:0a:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[   62.659455] tg3 0000:0a:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
[   62.660553] acpiphp_glue: hotplug_event: Bus check notify on \_SB_.PCI0.RP05
[   62.661467] acpiphp_glue: hotplug_event: re-enumerating slots under \_SB_.PCI0.RP05
[   62.662472] pcieport 0000:02:00.0: scanning [bus 03-3a] behind bridge, pass 0
[   62.663431] pci_bus 0000:03: scanning bus
[   62.664440] pcieport 0000:03:00.0: scanning [bus 04-04] behind bridge, pass 0
[   62.665427] pci_bus 0000:04: scanning bus
[   62.666414] pci_bus 0000:04: bus scan returning with max=04
[   62.667412] pcieport 0000:03:03.0: scanning [bus 05-2f] behind bridge, pass 0
[   62.668428] pci_bus 0000:05: scanning bus
[   62.669456] pcieport 0000:05:00.0: scanning [bus 06-2f] behind bridge, pass 0
[   62.670514] pci_bus 0000:06: scanning bus
[   62.671663] pcieport 0000:06:03.0: scanning [bus 07-07] behind bridge, pass 0
[   62.672730] pci_bus 0000:07: scanning bus
[   62.673779] pci_bus 0000:07: bus scan returning with max=07
[   62.674827] pcieport 0000:06:04.0: scanning [bus 08-2e] behind bridge, pass 0
[   62.675902] pci_bus 0000:08: scanning bus
[   62.676964] pcieport 0000:08:00.0: scanning [bus 09-2e] behind bridge, pass 0
[   62.678061] pci_bus 0000:09: scanning bus
[   62.679299] pcieport 0000:09:00.0: scanning [bus 0a-0a] behind bridge, pass 0
[   62.680433] pci_bus 0000:0a: scanning bus
[   62.681561] pci_bus 0000:0a: bus scan returning with max=0a
[   62.682709] pcieport 0000:09:00.0: scanning [bus 0a-0a] behind bridge, pass 1
[   62.683884] pci_bus 0000:09: bus scan returning with max=0a
[   62.685073] pcieport 0000:08:00.0: scanning [bus 09-2e] behind bridge, pass 1
[   62.686266] pci_bus 0000:08: bus scan returning with max=2e
[   62.687448] pcieport 0000:06:05.0: scanning [bus 2f-2f] behind bridge, pass 0
[   62.688660] pci_bus 0000:2f: scanning bus
[   62.689855] pci_bus 0000:2f: bus scan returning with max=2f
[   62.691048] pcieport 0000:06:03.0: scanning [bus 07-07] behind bridge, pass 1
[   62.692285] pcieport 0000:06:04.0: scanning [bus 08-2e] behind bridge, pass 1
[   62.693509] pcieport 0000:06:05.0: scanning [bus 2f-2f] behind bridge, pass 1
[   62.694719] pci_bus 0000:06: bus scan returning with max=2f
[   62.695930] pcieport 0000:05:00.0: scanning [bus 06-2f] behind bridge, pass 1
[   62.697153] pci_bus 0000:05: bus scan returning with max=2f
[   62.698375] pcieport 0000:03:04.0: scanning [bus 30-38] behind bridge, pass 0
[   62.699612] pci_bus 0000:30: scanning bus
[   62.700835] pci_bus 0000:30: bus scan returning with max=30
[   62.702071] pcieport 0000:03:05.0: scanning [bus 39-39] behind bridge, pass 0
[   62.703324] pci_bus 0000:39: scanning bus
[   62.704543] pci_bus 0000:39: bus scan returning with max=39
[   62.705754] pcieport 0000:03:06.0: scanning [bus 3a-3a] behind bridge, pass 0
[   62.706961] pci_bus 0000:3a: scanning bus
[   62.708162] pci_bus 0000:3a: bus scan returning with max=3a
[   62.709361] pcieport 0000:03:00.0: scanning [bus 04-04] behind bridge, pass 1
[   62.710580] pcieport 0000:03:03.0: scanning [bus 05-2f] behind bridge, pass 1
[   62.711769] pcieport 0000:03:04.0: scanning [bus 30-38] behind bridge, pass 1
[   62.712936] pcieport 0000:03:05.0: scanning [bus 39-39] behind bridge, pass 1
[   62.714083] pcieport 0000:03:06.0: scanning [bus 3a-3a] behind bridge, pass 1
[   62.715203] pci_bus 0000:03: bus scan returning with max=3a
[   62.716321] pcieport 0000:02:00.0: scanning [bus 03-3a] behind bridge, pass 1
[   62.717451] pci_bus 0000:03: Allocating resources
[   62.718660] pcieport 0000:03:00.0: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
[   62.719793] pcieport 0000:03:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
[   62.720985] pcieport 0000:09:00.0: bridge window [io  0x1000-0x0fff] to [bus 0a] add_size 1000
[   62.722150] pcieport 0000:09:00.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[   62.723287] pcieport 0000:08:00.0: bridge window [io  0x1000-0x0fff] to [bus 09-2e] add_size 1000
[   62.724461] pcieport 0000:08:00.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[   62.725606] pcieport 0000:06:04.0: bridge window [io  0x1000-0x0fff] to [bus 08-2e] add_size 1000
[   62.726776] pcieport 0000:06:05.0: bridge window [io  0x1000-0x0fff] to [bus 2f] add_size 1000
[   62.727907] pcieport 0000:06:05.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 2f] add_size 200000
[   62.729048] pcieport 0000:06:05.0: bridge window [mem 0x00100000-0x000fffff] to [bus 2f] add_size 200000
[   62.730217] pcieport 0000:03:04.0: bridge window [io  0x1000-0x0fff] to [bus 30-38] add_size 1000
[   62.731356] pcieport 0000:03:05.0: bridge window [io  0x1000-0x0fff] to [bus 39] add_size 1000
[   62.732480] pcieport 0000:03:05.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000
[   62.733613] pcieport 0000:03:05.0: bridge window [mem 0x00100000-0x000fffff] to [bus 39] add_size 200000
[   62.734745] pcieport 0000:03:06.0: bridge window [io  0x1000-0x0fff] to [bus 3a] add_size 1000
[   62.735862] pcieport 0000:03:06.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 3a] add_size 200000
[   62.736994] pcieport 0000:03:06.0: bridge window [mem 0x00100000-0x000fffff] to [bus 3a] add_size 200000
[   62.738125] pcieport 0000:03:00.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[   62.739254] pcieport 0000:03:05.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[   62.740387] pcieport 0000:03:05.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[   62.741516] pcieport 0000:03:06.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[   62.742656] pcieport 0000:03:06.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[   62.743812] pcieport 0000:03:00.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[   62.744975] pcieport 0000:03:04.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[   62.746109] pcieport 0000:03:05.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[   62.747223] pcieport 0000:03:06.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[   62.748322] pcieport 0000:03:00.0: BAR 9: can't assign mem pref (size 0x200000)
[   62.749409] pcieport 0000:03:05.0: BAR 8: can't assign mem (size 0x200000)
[   62.750490] pcieport 0000:03:05.0: BAR 9: can't assign mem pref (size 0x200000)
[   62.751558] pcieport 0000:03:06.0: BAR 8: can't assign mem (size 0x200000)
[   62.752607] pcieport 0000:03:06.0: BAR 9: can't assign mem pref (size 0x200000)
[   62.753657] pcieport 0000:03:00.0: BAR 7: can't assign io (size 0x1000)
[   62.754691] pcieport 0000:03:04.0: BAR 7: can't assign io (size 0x1000)
[   62.755703] pcieport 0000:03:05.0: BAR 7: can't assign io (size 0x1000)
[   62.756698] pcieport 0000:03:06.0: BAR 7: can't assign io (size 0x1000)
[   62.757676] pcieport 0000:03:06.0: BAR 8: can't assign mem (size 0x200000)
[   62.758660] pcieport 0000:03:06.0: BAR 9: can't assign mem pref (size 0x200000)
[   62.759650] pcieport 0000:03:06.0: BAR 7: can't assign io (size 0x1000)
[   62.760644] pcieport 0000:03:05.0: BAR 8: can't assign mem (size 0x200000)
[   62.761645] pcieport 0000:03:05.0: BAR 9: can't assign mem pref (size 0x200000)
[   62.762638] pcieport 0000:03:05.0: BAR 7: can't assign io (size 0x1000)
[   62.763614] pcieport 0000:03:04.0: BAR 7: can't assign io (size 0x1000)
[   62.764570] pcieport 0000:03:00.0: BAR 9: can't assign mem pref (size 0x200000)
[   62.765508] pcieport 0000:03:00.0: BAR 7: can't assign io (size 0x1000)
[   62.766433] pcieport 0000:06:05.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[   62.767369] pcieport 0000:06:05.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[   62.768298] pcieport 0000:06:04.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[   62.769231] pcieport 0000:06:05.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[   62.770143] pcieport 0000:06:05.0: BAR 8: can't assign mem (size 0x200000)
[   62.771045] pcieport 0000:06:05.0: BAR 9: can't assign mem pref (size 0x200000)
[   62.771951] pcieport 0000:06:04.0: BAR 7: can't assign io (size 0x1000)
[   62.772833] pcieport 0000:06:05.0: BAR 7: can't assign io (size 0x1000)
[   62.773704] pcieport 0000:06:05.0: BAR 8: can't assign mem (size 0x200000)
[   62.774560] pcieport 0000:06:05.0: BAR 9: can't assign mem pref (size 0x200000)
[   62.775417] pcieport 0000:06:05.0: BAR 7: can't assign io (size 0x1000)
[   62.776249] pcieport 0000:06:04.0: BAR 7: can't assign io (size 0x1000)
[   62.777073] pcieport 0000:08:00.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[   62.777905] pcieport 0000:08:00.0: BAR 7: can't assign io (size 0x1000)
[   62.778723] pcieport 0000:08:00.0: BAR 7: can't assign io (size 0x1000)
[   62.779527] pcieport 0000:09:00.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[   62.780330] pcieport 0000:09:00.0: BAR 7: can't assign io (size 0x1000)
[   62.781133] pcieport 0000:09:00.0: BAR 7: can't assign io (size 0x1000)
[   69.893067] ata8: limiting SATA link speed to 1.5 Gbps
[   69.893851] ata8: hard resetting link
[   72.100560] ata8: SATA link down (SStatus 111 SControl 310)
[   72.101341] ata8: EH complete
[   72.111216] ata8: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
[   72.112036] ata8: irq_stat 0x80000040, connection status changed
[   72.112883] ata8: SError: { CommWake DevExch }
[   72.113712] ata8: limiting SATA link speed to 1.5 Gbps
[   72.114543] ata8: hard resetting link
[   74.320984] ata8: COMRESET failed (errno=-32)
[   74.321816] ata8: reset failed (errno=-32), retrying in 8 secs
[   82.122136] ata8: hard resetting link
[   84.055442] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   84.063362] ata8.00: failed to IDENTIFY (I/O error, err_mask=0x100)
[   89.058705] ata8: hard resetting link
[   89.519044] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   89.522060] ata8.00: ATA-9: INTEL SSDSC2CW060A3, 400i, max UDMA/133
[   89.522997] ata8.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[   89.532028] ata8.00: configured for UDMA/133
[   89.532969] ata8: EH complete
[   89.533999] scsi 8:0:0:0: Direct-Access     ATA      INTEL SSDSC2CW06 400i PQ: 0 ANSI: 5
[   89.535148] sd 8:0:0:0: [sdb] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
[   89.535152] sd 8:0:0:0: Attached scsi generic sg1 type 0
[   89.537268] sd 8:0:0:0: [sdb] Write Protect is off
[   89.538277] sd 8:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   89.539279] sd 8:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   89.540612]  sdb: sdb1
[   89.541774] sd 8:0:0:0: [sdb] Attached SCSI disk
[   89.827653] ata8: exception Emask 0x10 SAct 0x0 SErr 0x41d0002 action 0xe frozen
[   89.828681] ata8: irq_stat 0x80400040, connection status changed
[   89.829710] ata8: SError: { RecovComm PHYRdyChg CommWake 10B8B Dispar DevExch }
[   89.830758] ata8: hard resetting link
[   90.709828] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   90.728993] ata8.00: failed to IDENTIFY (I/O error, err_mask=0x100)
[   90.730094] ata8.00: revalidation failed (errno=-5)
[   95.714103] ata8: hard resetting link
[   96.175429] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   96.197545] ata8.00: configured for UDMA/133
[   96.198648] ata8: EH complete
[  110.252855] acpiphp_glue: hotplug_event: Bus check notify on \_SB_.PCI0.RP05
[  110.253993] acpiphp_glue: hotplug_event: re-enumerating slots under \_SB_.PCI0.RP05
[  110.255164] pcieport 0000:06:05.0: PME# disabled
[  110.256451] tg3 0000:0a:00.0: PME# disabled
[  110.274805] pcieport 0000:09:00.0: PME# disabled
[  110.276073] pcieport 0000:08:00.0: PME# disabled
[  110.277359] pcieport 0000:06:04.0: PME# disabled
[  110.278625] ahci 0000:07:00.0: PME# disabled
[  110.279889] ------------[ cut here ]------------
[  110.281049] WARNING: CPU: 0 PID: 978 at fs/sysfs/group.c:214 sysfs_remove_group+0xc6/0xd0()
[  110.282158] sysfs group ffffffff81e6f940 not found for kobject 'host7'
[  110.283273] Modules linked in:
[  110.284381] CPU: 0 PID: 978 Comm: kworker/0:2 Not tainted 3.13.0-rc1+ #49
[  110.285513] Hardware name:                  /D33217CK, BIOS GKPPT10H.86A.0042.2013.0422.1439 04/22/2013
[  110.286678] Workqueue: kacpi_hotplug acpi_hotplug_work_fn
[  110.287843]  0000000000000009 ffff88006e1bda00 ffffffff8180b8df ffff88006e1bda48
[  110.289029]  ffff88006e1bda38 ffffffff81044b28 0000000000000000 ffffffff81e6f940
[  110.290217]  ffff88006e0b9b58 ffff88006e0b9988 ffff88006e935c28 ffff88006e1bda98
[  110.291404] Call Trace:
[  110.292564]  [<ffffffff8180b8df>] dump_stack+0x45/0x56
[  110.293734]  [<ffffffff81044b28>] warn_slowpath_common+0x78/0xa0
[  110.294899]  [<ffffffff81044b97>] warn_slowpath_fmt+0x47/0x50
[  110.296045]  [<ffffffff811b0839>] ? sysfs_get_dirent_ns+0x49/0x70
[  110.297198]  [<ffffffff811b1a76>] sysfs_remove_group+0xc6/0xd0
[  110.298339]  [<ffffffff8144a39e>] dpm_sysfs_remove+0x3e/0x50
[  110.299467]  [<ffffffff81440e60>] device_del+0x40/0x1b0
[  110.300580]  [<ffffffff81440fe9>] device_unregister+0x19/0x60
[  110.301697]  [<ffffffff81458d0a>] scsi_remove_host+0xba/0x110
[  110.302809]  [<ffffffff81476f56>] ata_host_detach+0xc6/0x100
[  110.303910]  [<ffffffff81476fa8>] ata_pci_remove_one+0x18/0x20
[  110.304987]  [<ffffffff812f1638>] pci_device_remove+0x28/0x60
[  110.306061]  [<ffffffff81444944>] __device_release_driver+0x64/0xd0
[  110.307125]  [<ffffffff814449ce>] device_release_driver+0x1e/0x30
[  110.308175]  [<ffffffff812ecaa4>] pci_stop_bus_device+0x94/0xa0
[  110.309214]  [<ffffffff812eca4b>] pci_stop_bus_device+0x3b/0xa0
[  110.310231]  [<ffffffff812eca4b>] pci_stop_bus_device+0x3b/0xa0
[  110.311226]  [<ffffffff812ecbad>] pci_stop_and_remove_bus_device+0xd/0x20
[  110.312223]  [<ffffffff813050b3>] trim_stale_devices+0x73/0xe0
[  110.313217]  [<ffffffff813050fb>] trim_stale_devices+0xbb/0xe0
[  110.314200]  [<ffffffff813050fb>] trim_stale_devices+0xbb/0xe0
[  110.315161]  [<ffffffff813054de>] acpiphp_check_bridge+0x7e/0xd0
[  110.316116]  [<ffffffff8130631f>] hotplug_event+0xff/0x240
[  110.317071]  [<ffffffff81306485>] hotplug_event_work+0x25/0x60
[  110.318008]  [<ffffffff8131f3f9>] acpi_hotplug_work_fn+0x17/0x22
[  110.318945]  [<ffffffff8105e11a>] process_one_work+0x17a/0x440
[  110.319863]  [<ffffffff8105ed19>] worker_thread+0x119/0x390
[  110.320780]  [<ffffffff8105ec00>] ? manage_workers.isra.25+0x2a0/0x2a0
[  110.321696]  [<ffffffff81064d0d>] kthread+0xcd/0xf0
[  110.322624]  [<ffffffff81064c40>] ? kthread_create_on_node+0x180/0x180
[  110.323579]  [<ffffffff8181c43c>] ret_from_fork+0x7c/0xb0
[  110.324529]  [<ffffffff81064c40>] ? kthread_create_on_node+0x180/0x180
[  110.325485] ---[ end trace 47aef14bd4d4641e ]---
[  110.326442] ------------[ cut here ]------------
[  110.327414] WARNING: CPU: 0 PID: 978 at fs/sysfs/group.c:214 sysfs_remove_group+0xc6/0xd0()
[  110.328367] sysfs group ffffffff81e6f940 not found for kobject 'host7'
[  110.329315] Modules linked in:
[  110.330240] CPU: 0 PID: 978 Comm: kworker/0:2 Tainted: G        W    3.13.0-rc1+ #49
[  110.331171] Hardware name:                  /D33217CK, BIOS GKPPT10H.86A.0042.2013.0422.1439 04/22/2013
[  110.332119] Workqueue: kacpi_hotplug acpi_hotplug_work_fn
[  110.333065]  0000000000000009 ffff88006e1bda18 ffffffff8180b8df ffff88006e1bda60
[  110.334040]  ffff88006e1bda50 ffffffff81044b28 0000000000000000 ffffffff81e6f940
[  110.335013]  ffff88006e0b9998 ffff88006df06ed8 ffff88006e935c28 ffff88006e1bdab0
[  110.335990] Call Trace:
[  110.336942]  [<ffffffff8180b8df>] dump_stack+0x45/0x56
[  110.337919]  [<ffffffff81044b28>] warn_slowpath_common+0x78/0xa0
[  110.338900]  [<ffffffff81044b97>] warn_slowpath_fmt+0x47/0x50
[  110.339873]  [<ffffffff811b0839>] ? sysfs_get_dirent_ns+0x49/0x70
[  110.340848]  [<ffffffff811b1a76>] sysfs_remove_group+0xc6/0xd0
[  110.341826]  [<ffffffff8144a39e>] dpm_sysfs_remove+0x3e/0x50
[  110.342811]  [<ffffffff81440e60>] device_del+0x40/0x1b0
[  110.343796]  [<ffffffff81458d12>] scsi_remove_host+0xc2/0x110
[  110.344782]  [<ffffffff81476f56>] ata_host_detach+0xc6/0x100
[  110.345768]  [<ffffffff81476fa8>] ata_pci_remove_one+0x18/0x20
[  110.346753]  [<ffffffff812f1638>] pci_device_remove+0x28/0x60
[  110.347739]  [<ffffffff81444944>] __device_release_driver+0x64/0xd0
[  110.348730]  [<ffffffff814449ce>] device_release_driver+0x1e/0x30
[  110.349712]  [<ffffffff812ecaa4>] pci_stop_bus_device+0x94/0xa0
[  110.350713]  [<ffffffff812eca4b>] pci_stop_bus_device+0x3b/0xa0
[  110.351719]  [<ffffffff812eca4b>] pci_stop_bus_device+0x3b/0xa0
[  110.352703]  [<ffffffff812ecbad>] pci_stop_and_remove_bus_device+0xd/0x20
[  110.353691]  [<ffffffff813050b3>] trim_stale_devices+0x73/0xe0
[  110.354692]  [<ffffffff813050fb>] trim_stale_devices+0xbb/0xe0
[  110.355692]  [<ffffffff813050fb>] trim_stale_devices+0xbb/0xe0
[  110.356676]  [<ffffffff813054de>] acpiphp_check_bridge+0x7e/0xd0
[  110.357661]  [<ffffffff8130631f>] hotplug_event+0xff/0x240
[  110.358654]  [<ffffffff81306485>] hotplug_event_work+0x25/0x60
[  110.359638]  [<ffffffff8131f3f9>] acpi_hotplug_work_fn+0x17/0x22
[  110.360628]  [<ffffffff8105e11a>] process_one_work+0x17a/0x440
[  110.361616]  [<ffffffff8105ed19>] worker_thread+0x119/0x390
[  110.362603]  [<ffffffff8105ec00>] ? manage_workers.isra.25+0x2a0/0x2a0
[  110.363594]  [<ffffffff81064d0d>] kthread+0xcd/0xf0
[  110.364578]  [<ffffffff81064c40>] ? kthread_create_on_node+0x180/0x180
[  110.365571]  [<ffffffff8181c43c>] ret_from_fork+0x7c/0xb0
[  110.366558]  [<ffffffff81064c40>] ? kthread_create_on_node+0x180/0x180
[  110.367547] ---[ end trace 47aef14bd4d4641f ]---
[  110.368555] ata8.00: disabled
[  110.369698] ------------[ cut here ]------------
[  110.370728] WARNING: CPU: 0 PID: 978 at fs/sysfs/group.c:214 sysfs_remove_group+0xc6/0xd0()
[  110.371712] sysfs group ffffffff81e6f940 not found for kobject '8:0:0:0'
[  110.372691] Modules linked in:
[  110.373648] CPU: 0 PID: 978 Comm: kworker/0:2 Tainted: G        W    3.13.0-rc1+ #49
[  110.374609] Hardware name:                  /D33217CK, BIOS GKPPT10H.86A.0042.2013.0422.1439 04/22/2013
[  110.375590] Workqueue: kacpi_hotplug acpi_hotplug_work_fn
[  110.376569]  0000000000000009 ffff88006e1bd9a8 ffffffff8180b8df ffff88006e1bd9f0
[  110.377574]  ffff88006e1bd9e0 ffffffff81044b28 0000000000000000 ffffffff81e6f940
[  110.378577]  ffff88006d42b210 ffff8801003b7948 ffff88006e935c28 ffff88006e1bda40
[  110.379581] Call Trace:
[  110.380560]  [<ffffffff8180b8df>] dump_stack+0x45/0x56
[  110.381565]  [<ffffffff81044b28>] warn_slowpath_common+0x78/0xa0
[  110.382570]  [<ffffffff81044b97>] warn_slowpath_fmt+0x47/0x50
[  110.383565]  [<ffffffff811b0839>] ? sysfs_get_dirent_ns+0x49/0x70
[  110.384565]  [<ffffffff811b1a76>] sysfs_remove_group+0xc6/0xd0
[  110.385561]  [<ffffffff8144a39e>] dpm_sysfs_remove+0x3e/0x50
[  110.386562]  [<ffffffff81440e60>] device_del+0x40/0x1b0
[  110.387559]  [<ffffffff81440fe9>] device_unregister+0x19/0x60
[  110.388554]  [<ffffffff812bec19>] bsg_unregister_queue+0x59/0xa0
[  110.389553]  [<ffffffff81464499>] __scsi_remove_device+0x99/0xc0
[  110.390546]  [<ffffffff81462bc4>] scsi_forget_host+0x64/0x70
[  110.391537]  [<ffffffff81458cae>] scsi_remove_host+0x5e/0x110
[  110.392520]  [<ffffffff81476f56>] ata_host_detach+0xc6/0x100
[  110.393517]  [<ffffffff81476fa8>] ata_pci_remove_one+0x18/0x20
[  110.394529]  [<ffffffff812f1638>] pci_device_remove+0x28/0x60
[  110.395538]  [<ffffffff81444944>] __device_release_driver+0x64/0xd0
[  110.396546]  [<ffffffff814449ce>] device_release_driver+0x1e/0x30
[  110.397567]  [<ffffffff812ecaa4>] pci_stop_bus_device+0x94/0xa0
[  110.398605]  [<ffffffff812eca4b>] pci_stop_bus_device+0x3b/0xa0
[  110.399631]  [<ffffffff812eca4b>] pci_stop_bus_device+0x3b/0xa0
[  110.400643]  [<ffffffff812ecbad>] pci_stop_and_remove_bus_device+0xd/0x20
[  110.401667]  [<ffffffff813050b3>] trim_stale_devices+0x73/0xe0
[  110.402691]  [<ffffffff813050fb>] trim_stale_devices+0xbb/0xe0
[  110.403705]  [<ffffffff813050fb>] trim_stale_devices+0xbb/0xe0
[  110.404704]  [<ffffffff813054de>] acpiphp_check_bridge+0x7e/0xd0
[  110.405699]  [<ffffffff8130631f>] hotplug_event+0xff/0x240
[  110.406688]  [<ffffffff81306485>] hotplug_event_work+0x25/0x60
[  110.407670]  [<ffffffff8131f3f9>] acpi_hotplug_work_fn+0x17/0x22
[  110.408653]  [<ffffffff8105e11a>] process_one_work+0x17a/0x440
[  110.409634]  [<ffffffff8105ed19>] worker_thread+0x119/0x390
[  110.410604]  [<ffffffff8105ec00>] ? manage_workers.isra.25+0x2a0/0x2a0
[  110.411576]  [<ffffffff81064d0d>] kthread+0xcd/0xf0
[  110.412543]  [<ffffffff81064c40>] ? kthread_create_on_node+0x180/0x180
[  110.413508]  [<ffffffff8181c43c>] ret_from_fork+0x7c/0xb0
[  110.414451]  [<ffffffff81064c40>] ? kthread_create_on_node+0x180/0x180
[  110.415391] ---[ end trace 47aef14bd4d46420 ]---
[  110.416354] ------------[ cut here ]------------
[  110.417311] WARNING: CPU: 0 PID: 978 at fs/sysfs/group.c:214 sysfs_remove_group+0xc6/0xd0()
[  110.418228] sysfs group ffffffff81e6f940 not found for kobject '8:0:0:0'
[  110.419135] Modules linked in:
[  110.420030] CPU: 0 PID: 978 Comm: kworker/0:2 Tainted: G        W    3.13.0-rc1+ #49
[  110.420952] Hardware name:                  /D33217CK, BIOS GKPPT10H.86A.0042.2013.0422.1439 04/22/2013
[  110.421887] Workqueue: kacpi_hotplug acpi_hotplug_work_fn
[  110.422827]  0000000000000009 ffff88006e1bd9c0 ffffffff8180b8df ffff88006e1bda08
[  110.423798]  ffff88006e1bd9f8 ffffffff81044b28 0000000000000000 ffffffff81e6f940
[  110.424781]  ffff8801003b7b18 ffff8801003b7948 ffff88006e935c28 ffff88006e1bda58
[  110.425770] Call Trace:
[  110.426734]  [<ffffffff8180b8df>] dump_stack+0x45/0x56
[  110.427719]  [<ffffffff81044b28>] warn_slowpath_common+0x78/0xa0
[  110.428712]  [<ffffffff81044b97>] warn_slowpath_fmt+0x47/0x50
[  110.429701]  [<ffffffff811b0839>] ? sysfs_get_dirent_ns+0x49/0x70
[  110.430694]  [<ffffffff811b1a76>] sysfs_remove_group+0xc6/0xd0
[  110.431686]  [<ffffffff8144a39e>] dpm_sysfs_remove+0x3e/0x50
[  110.432679]  [<ffffffff81440e60>] device_del+0x40/0x1b0
[  110.433677]  [<ffffffff81440fe9>] device_unregister+0x19/0x60
[  110.434671]  [<ffffffff814644a5>] __scsi_remove_device+0xa5/0xc0
[  110.435668]  [<ffffffff81462bc4>] scsi_forget_host+0x64/0x70
[  110.436664]  [<ffffffff81458cae>] scsi_remove_host+0x5e/0x110
[  110.437651]  [<ffffffff81476f56>] ata_host_detach+0xc6/0x100
[  110.438639]  [<ffffffff81476fa8>] ata_pci_remove_one+0x18/0x20
[  110.439624]  [<ffffffff812f1638>] pci_device_remove+0x28/0x60
[  110.440617]  [<ffffffff81444944>] __device_release_driver+0x64/0xd0
[  110.441631]  [<ffffffff814449ce>] device_release_driver+0x1e/0x30
[  110.442641]  [<ffffffff812ecaa4>] pci_stop_bus_device+0x94/0xa0
[  110.443643]  [<ffffffff812eca4b>] pci_stop_bus_device+0x3b/0xa0
[  110.444642]  [<ffffffff812eca4b>] pci_stop_bus_device+0x3b/0xa0
[  110.445646]  [<ffffffff812ecbad>] pci_stop_and_remove_bus_device+0xd/0x20
[  110.446654]  [<ffffffff813050b3>] trim_stale_devices+0x73/0xe0
[  110.447664]  [<ffffffff813050fb>] trim_stale_devices+0xbb/0xe0
[  110.448667]  [<ffffffff813050fb>] trim_stale_devices+0xbb/0xe0
[  110.449658]  [<ffffffff813054de>] acpiphp_check_bridge+0x7e/0xd0
[  110.450646]  [<ffffffff8130631f>] hotplug_event+0xff/0x240
[  110.451631]  [<ffffffff81306485>] hotplug_event_work+0x25/0x60
[  110.452609]  [<ffffffff8131f3f9>] acpi_hotplug_work_fn+0x17/0x22
[  110.453590]  [<ffffffff8105e11a>] process_one_work+0x17a/0x440
[  110.454565]  [<ffffffff8105ed19>] worker_thread+0x119/0x390
[  110.455537]  [<ffffffff8105ec00>] ? manage_workers.isra.25+0x2a0/0x2a0
[  110.456514]  [<ffffffff81064d0d>] kthread+0xcd/0xf0
[  110.457482]  [<ffffffff81064c40>] ? kthread_create_on_node+0x180/0x180
[  110.458459]  [<ffffffff8181c43c>] ret_from_fork+0x7c/0xb0
[  110.459415]  [<ffffffff81064c40>] ? kthread_create_on_node+0x180/0x180
[  110.460365] ---[ end trace 47aef14bd4d46421 ]---
[  110.461306] ------------[ cut here ]------------
[  110.462234] WARNING: CPU: 0 PID: 978 at fs/sysfs/group.c:214 sysfs_remove_group+0xc6/0xd0()
[  110.463172] sysfs group ffffffff81e6f940 not found for kobject 'sg1'
[  110.464095] Modules linked in:
[  110.464998] CPU: 0 PID: 978 Comm: kworker/0:2 Tainted: G        W    3.13.0-rc1+ #49
[  110.465926] Hardware name:                  /D33217CK, BIOS GKPPT10H.86A.0042.2013.0422.1439 04/22/2013
[  110.466877] Workqueue: kacpi_hotplug acpi_hotplug_work_fn
[  110.467821]  0000000000000009 ffff88006e1bd920 ffffffff8180b8df ffff88006e1bd968
[  110.468790]  ffff88006e1bd958 ffffffff81044b28 0000000000000000 ffffffff81e6f940
[  110.469772]  ffff88006d42b810 ffff8801003b7948 0000000000000246 ffff88006e1bd9b8
[  110.470764] Call Trace:
[  110.471731]  [<ffffffff8180b8df>] dump_stack+0x45/0x56
[  110.472714]  [<ffffffff81044b28>] warn_slowpath_common+0x78/0xa0
[  110.473700]  [<ffffffff81044b97>] warn_slowpath_fmt+0x47/0x50
[  110.474681]  [<ffffffff811b0839>] ? sysfs_get_dirent_ns+0x49/0x70
[  110.475668]  [<ffffffff811b1a76>] sysfs_remove_group+0xc6/0xd0
[  110.476658]  [<ffffffff8144a39e>] dpm_sysfs_remove+0x3e/0x50
[  110.477646]  [<ffffffff81440e60>] device_del+0x40/0x1b0
[  110.478636]  [<ffffffff81440fe9>] device_unregister+0x19/0x60
[  110.479625]  [<ffffffff81441097>] device_destroy+0x37/0x40
[  110.480612]  [<ffffffff81472ace>] sg_remove+0xbe/0x100
[  110.481596]  [<ffffffff81440ee1>] device_del+0xc1/0x1b0
[  110.482574]  [<ffffffff81440fe9>] device_unregister+0x19/0x60
[  110.483550]  [<ffffffff814644a5>] __scsi_remove_device+0xa5/0xc0
[  110.484530]  [<ffffffff81462bc4>] scsi_forget_host+0x64/0x70
[  110.485520]  [<ffffffff81458cae>] scsi_remove_host+0x5e/0x110
[  110.486518]  [<ffffffff81476f56>] ata_host_detach+0xc6/0x100
[  110.487514]  [<ffffffff81476fa8>] ata_pci_remove_one+0x18/0x20
[  110.488502]  [<ffffffff812f1638>] pci_device_remove+0x28/0x60
[  110.489503]  [<ffffffff81444944>] __device_release_driver+0x64/0xd0
[  110.490521]  [<ffffffff814449ce>] device_release_driver+0x1e/0x30
[  110.491537]  [<ffffffff812ecaa4>] pci_stop_bus_device+0x94/0xa0
[  110.492553]  [<ffffffff812eca4b>] pci_stop_bus_device+0x3b/0xa0
[  110.493565]  [<ffffffff812eca4b>] pci_stop_bus_device+0x3b/0xa0
[  110.494570]  [<ffffffff812ecbad>] pci_stop_and_remove_bus_device+0xd/0x20
[  110.495574]  [<ffffffff813050b3>] trim_stale_devices+0x73/0xe0
[  110.496577]  [<ffffffff813050fb>] trim_stale_devices+0xbb/0xe0
[  110.497565]  [<ffffffff813050fb>] trim_stale_devices+0xbb/0xe0
[  110.498535]  [<ffffffff813054de>] acpiphp_check_bridge+0x7e/0xd0
[  110.499504]  [<ffffffff8130631f>] hotplug_event+0xff/0x240
[  110.500467]  [<ffffffff81306485>] hotplug_event_work+0x25/0x60
[  110.501422]  [<ffffffff8131f3f9>] acpi_hotplug_work_fn+0x17/0x22
[  110.502373]  [<ffffffff8105e11a>] process_one_work+0x17a/0x440
[  110.503323]  [<ffffffff8105ed19>] worker_thread+0x119/0x390
[  110.504256]  [<ffffffff8105ec00>] ? manage_workers.isra.25+0x2a0/0x2a0
[  110.505180]  [<ffffffff81064d0d>] kthread+0xcd/0xf0
[  110.506090]  [<ffffffff81064c40>] ? kthread_create_on_node+0x180/0x180
[  110.506994]  [<ffffffff8181c43c>] ret_from_fork+0x7c/0xb0
[  110.507875]  [<ffffffff81064c40>] ? kthread_create_on_node+0x180/0x180
[  110.508733] ---[ end trace 47aef14bd4d46422 ]---
[  110.509698] ------------[ cut here ]------------
[  110.510607] WARNING: CPU: 0 PID: 978 at fs/sysfs/group.c:214 sysfs_remove_group+0xc6/0xd0()
[  110.511476] sysfs group ffffffff81e6f940 not found for kobject '8:0:0:0'
[  110.512338] Modules linked in:
[  110.513196] CPU: 0 PID: 978 Comm: kworker/0:2 Tainted: G        W    3.13.0-rc1+ #49
[  110.514079] Hardware name:                  /D33217CK, BIOS GKPPT10H.86A.0042.2013.0422.1439 04/22/2013
[  110.514996] Workqueue: kacpi_hotplug acpi_hotplug_work_fn
[  110.515920]  0000000000000009 ffff88006e1bd9d8 ffffffff8180b8df ffff88006e1bda20
[  110.516875]  ffff88006e1bda10 ffffffff81044b28 0000000000000000 ffffffff81e6f940
[  110.517834]  ffff8801003b7958 ffff88006d40ec28 ffff88006e935c28 ffff88006e1bda70
[  110.518795] Call Trace:
[  110.519745]  [<ffffffff8180b8df>] dump_stack+0x45/0x56
[  110.520714]  [<ffffffff81044b28>] warn_slowpath_common+0x78/0xa0
[  110.521693]  [<ffffffff81044b97>] warn_slowpath_fmt+0x47/0x50
[  110.522663]  [<ffffffff811b0839>] ? sysfs_get_dirent_ns+0x49/0x70
[  110.523640]  [<ffffffff811b1a76>] sysfs_remove_group+0xc6/0xd0
[  110.524614]  [<ffffffff8144a39e>] dpm_sysfs_remove+0x3e/0x50
[  110.525592]  [<ffffffff81440e60>] device_del+0x40/0x1b0
[  110.526571]  [<ffffffff814644b5>] __scsi_remove_device+0xb5/0xc0
[  110.527556]  [<ffffffff81462bc4>] scsi_forget_host+0x64/0x70
[  110.528546]  [<ffffffff81458cae>] scsi_remove_host+0x5e/0x110
[  110.529528]  [<ffffffff81476f56>] ata_host_detach+0xc6/0x100
[  110.530507]  [<ffffffff81476fa8>] ata_pci_remove_one+0x18/0x20
[  110.531486]  [<ffffffff812f1638>] pci_device_remove+0x28/0x60
[  110.532460]  [<ffffffff81444944>] __device_release_driver+0x64/0xd0
[  110.533450]  [<ffffffff814449ce>] device_release_driver+0x1e/0x30
[  110.534451]  [<ffffffff812ecaa4>] pci_stop_bus_device+0x94/0xa0
[  110.535451]  [<ffffffff812eca4b>] pci_stop_bus_device+0x3b/0xa0
[  110.536431]  [<ffffffff812eca4b>] pci_stop_bus_device+0x3b/0xa0
[  110.537410]  [<ffffffff812ecbad>] pci_stop_and_remove_bus_device+0xd/0x20
[  110.538408]  [<ffffffff813050b3>] trim_stale_devices+0x73/0xe0
[  110.539410]  [<ffffffff813050fb>] trim_stale_devices+0xbb/0xe0
[  110.540398]  [<ffffffff813050fb>] trim_stale_devices+0xbb/0xe0
[  110.541378]  [<ffffffff813054de>] acpiphp_check_bridge+0x7e/0xd0
[  110.542356]  [<ffffffff8130631f>] hotplug_event+0xff/0x240
[  110.543334]  [<ffffffff81306485>] hotplug_event_work+0x25/0x60
[  110.544306]  [<ffffffff8131f3f9>] acpi_hotplug_work_fn+0x17/0x22
[  110.545280]  [<ffffffff8105e11a>] process_one_work+0x17a/0x440
[  110.546250]  [<ffffffff8105ed19>] worker_thread+0x119/0x390
[  110.547220]  [<ffffffff8105ec00>] ? manage_workers.isra.25+0x2a0/0x2a0
[  110.548193]  [<ffffffff81064d0d>] kthread+0xcd/0xf0
[  110.549159]  [<ffffffff81064c40>] ? kthread_create_on_node+0x180/0x180
[  110.550126]  [<ffffffff8181c43c>] ret_from_fork+0x7c/0xb0
[  110.551093]  [<ffffffff81064c40>] ? kthread_create_on_node+0x180/0x180
[  110.552050] ---[ end trace 47aef14bd4d46423 ]---
[  110.553000] ------------[ cut here ]------------
[  110.553931] WARNING: CPU: 0 PID: 978 at fs/sysfs/group.c:214 sysfs_remove_group+0xc6/0xd0()
[  110.554881] sysfs group ffffffff81e6f940 not found for kobject '8:0:0:0'
[  110.555813] Modules linked in:
[  110.556725] CPU: 0 PID: 978 Comm: kworker/0:2 Tainted: G        W    3.13.0-rc1+ #49
[  110.557655] Hardware name:                  /D33217CK, BIOS GKPPT10H.86A.0042.2013.0422.1439 04/22/2013
[  110.558606] Workqueue: kacpi_hotplug acpi_hotplug_work_fn
[  110.559556]  0000000000000009 ffff88006e1bd910 ffffffff8180b8df ffff88006e1bd958
[  110.560525]  ffff88006e1bd948 ffffffff81044b28 0000000000000000 ffffffff81e6f940
[  110.561502]  ffff88006d40d420 ffff8801003b7948 ffff88006e935c28 ffff88006e1bd9a8
[  110.562483] Call Trace:
[  110.563452]  [<ffffffff8180b8df>] dump_stack+0x45/0x56
[  110.564437]  [<ffffffff81044b28>] warn_slowpath_common+0x78/0xa0
[  110.565426]  [<ffffffff81044b97>] warn_slowpath_fmt+0x47/0x50
[  110.566405]  [<ffffffff811b0839>] ? sysfs_get_dirent_ns+0x49/0x70
[  110.567392]  [<ffffffff811b1a76>] sysfs_remove_group+0xc6/0xd0
[  110.568376]  [<ffffffff8144a39e>] dpm_sysfs_remove+0x3e/0x50
[  110.569359]  [<ffffffff81440e60>] device_del+0x40/0x1b0
[  110.570347]  [<ffffffff8146b4ef>] sd_remove+0x5f/0xd0
[  110.571329]  [<ffffffff81444944>] __device_release_driver+0x64/0xd0
[  110.572322]  [<ffffffff814449ce>] device_release_driver+0x1e/0x30
[  110.573315]  [<ffffffff81444290>] bus_remove_device+0x100/0x180
[  110.574306]  [<ffffffff81440f41>] device_del+0x121/0x1b0
[  110.575294]  [<ffffffff814644b5>] __scsi_remove_device+0xb5/0xc0
[  110.576287]  [<ffffffff81462bc4>] scsi_forget_host+0x64/0x70
[  110.577294]  [<ffffffff81458cae>] scsi_remove_host+0x5e/0x110
[  110.578310]  [<ffffffff81476f56>] ata_host_detach+0xc6/0x100
[  110.579321]  [<ffffffff81476fa8>] ata_pci_remove_one+0x18/0x20
[  110.580326]  [<ffffffff812f1638>] pci_device_remove+0x28/0x60
[  110.581339]  [<ffffffff81444944>] __device_release_driver+0x64/0xd0
[  110.582372]  [<ffffffff814449ce>] device_release_driver+0x1e/0x30
[  110.583405]  [<ffffffff812ecaa4>] pci_stop_bus_device+0x94/0xa0
[  110.584436]  [<ffffffff812eca4b>] pci_stop_bus_device+0x3b/0xa0
[  110.585462]  [<ffffffff812eca4b>] pci_stop_bus_device+0x3b/0xa0
[  110.586475]  [<ffffffff812ecbad>] pci_stop_and_remove_bus_device+0xd/0x20
[  110.587492]  [<ffffffff813050b3>] trim_stale_devices+0x73/0xe0
[  110.588514]  [<ffffffff813050fb>] trim_stale_devices+0xbb/0xe0
[  110.589519]  [<ffffffff813050fb>] trim_stale_devices+0xbb/0xe0
[  110.590508]  [<ffffffff813054de>] acpiphp_check_bridge+0x7e/0xd0
[  110.591492]  [<ffffffff8130631f>] hotplug_event+0xff/0x240
[  110.592473]  [<ffffffff81306485>] hotplug_event_work+0x25/0x60
[  110.593449]  [<ffffffff8131f3f9>] acpi_hotplug_work_fn+0x17/0x22
[  110.594415]  [<ffffffff8105e11a>] process_one_work+0x17a/0x440
[  110.595385]  [<ffffffff8105ed19>] worker_thread+0x119/0x390
[  110.596338]  [<ffffffff8105ec00>] ? manage_workers.isra.25+0x2a0/0x2a0
[  110.597283]  [<ffffffff81064d0d>] kthread+0xcd/0xf0
[  110.598213]  [<ffffffff81064c40>] ? kthread_create_on_node+0x180/0x180
[  110.599137]  [<ffffffff8181c43c>] ret_from_fork+0x7c/0xb0
[  110.600042]  [<ffffffff81064c40>] ? kthread_create_on_node+0x180/0x180
[  110.600929] ---[ end trace 47aef14bd4d46424 ]---
[  110.601818] ------------[ cut here ]------------
[  110.602721] WARNING: CPU: 0 PID: 978 at fs/sysfs/group.c:214 sysfs_remove_group+0xc6/0xd0()
[  110.603610] sysfs group ffffffff81e6f940 not found for kobject 'sdb1'
[  110.604489] Modules linked in:
[  110.605364] CPU: 0 PID: 978 Comm: kworker/0:2 Tainted: G        W    3.13.0-rc1+ #49
[  110.606266] Hardware name:                  /D33217CK, BIOS GKPPT10H.86A.0042.2013.0422.1439 04/22/2013
[  110.607205] Workqueue: kacpi_hotplug acpi_hotplug_work_fn
[  110.608149]  0000000000000009 ffff88006e1bd8b8 ffffffff8180b8df ffff88006e1bd900
[  110.609125]  ffff88006e1bd8f0 ffffffff81044b28 0000000000000000 ffffffff81e6f940
[  110.610107]  ffff88006df4dc38 ffff88006d40d070 ffff88006e935c28 ffff88006e1bd950
[  110.611095] Call Trace:
[  110.612063]  [<ffffffff8180b8df>] dump_stack+0x45/0x56
[  110.613047]  [<ffffffff81044b28>] warn_slowpath_common+0x78/0xa0
[  110.614037]  [<ffffffff81044b97>] warn_slowpath_fmt+0x47/0x50
[  110.615019]  [<ffffffff811b0839>] ? sysfs_get_dirent_ns+0x49/0x70
[  110.616003]  [<ffffffff811b1a76>] sysfs_remove_group+0xc6/0xd0
[  110.616989]  [<ffffffff8144a39e>] dpm_sysfs_remove+0x3e/0x50
[  110.617970]  [<ffffffff81440e60>] device_del+0x40/0x1b0
[  110.618955]  [<ffffffff812ba063>] delete_partition+0x43/0x80
[  110.619942]  [<ffffffff812b8648>] del_gendisk+0xb8/0x290
[  110.620929]  [<ffffffff8146b4fb>] sd_remove+0x6b/0xd0
[  110.621911]  [<ffffffff81444944>] __device_release_driver+0x64/0xd0
[  110.622900]  [<ffffffff814449ce>] device_release_driver+0x1e/0x30
[  110.623882]  [<ffffffff81444290>] bus_remove_device+0x100/0x180
[  110.624869]  [<ffffffff81440f41>] device_del+0x121/0x1b0
[  110.625860]  [<ffffffff814644b5>] __scsi_remove_device+0xb5/0xc0
[  110.626870]  [<ffffffff81462bc4>] scsi_forget_host+0x64/0x70
[  110.627879]  [<ffffffff81458cae>] scsi_remove_host+0x5e/0x110
[  110.628875]  [<ffffffff81476f56>] ata_host_detach+0xc6/0x100
[  110.629881]  [<ffffffff81476fa8>] ata_pci_remove_one+0x18/0x20
[  110.630904]  [<ffffffff812f1638>] pci_device_remove+0x28/0x60
[  110.631920]  [<ffffffff81444944>] __device_release_driver+0x64/0xd0
[  110.632941]  [<ffffffff814449ce>] device_release_driver+0x1e/0x30
[  110.633970]  [<ffffffff812ecaa4>] pci_stop_bus_device+0x94/0xa0
[  110.634998]  [<ffffffff812eca4b>] pci_stop_bus_device+0x3b/0xa0
[  110.636013]  [<ffffffff812eca4b>] pci_stop_bus_device+0x3b/0xa0
[  110.637017]  [<ffffffff812ecbad>] pci_stop_and_remove_bus_device+0xd/0x20
[  110.638021]  [<ffffffff813050b3>] trim_stale_devices+0x73/0xe0
[  110.639025]  [<ffffffff813050fb>] trim_stale_devices+0xbb/0xe0
[  110.640013]  [<ffffffff813050fb>] trim_stale_devices+0xbb/0xe0
[  110.640983]  [<ffffffff813054de>] acpiphp_check_bridge+0x7e/0xd0
[  110.641951]  [<ffffffff8130631f>] hotplug_event+0xff/0x240
[  110.642905]  [<ffffffff81306485>] hotplug_event_work+0x25/0x60
[  110.643861]  [<ffffffff8131f3f9>] acpi_hotplug_work_fn+0x17/0x22
[  110.644803]  [<ffffffff8105e11a>] process_one_work+0x17a/0x440
[  110.645730]  [<ffffffff8105ed19>] worker_thread+0x119/0x390
[  110.646647]  [<ffffffff8105ec00>] ? manage_workers.isra.25+0x2a0/0x2a0
[  110.647556]  [<ffffffff81064d0d>] kthread+0xcd/0xf0
[  110.648440]  [<ffffffff81064c40>] ? kthread_create_on_node+0x180/0x180
[  110.649310]  [<ffffffff8181c43c>] ret_from_fork+0x7c/0xb0
[  110.650160]  [<ffffffff81064c40>] ? kthread_create_on_node+0x180/0x180
[  110.651007] ---[ end trace 47aef14bd4d46425 ]---
[  110.651901] ------------[ cut here ]------------
[  110.652744] WARNING: CPU: 0 PID: 978 at fs/sysfs/group.c:214 sysfs_remove_group+0xc6/0xd0()
[  110.653604] sysfs group ffffffff81e3b440 not found for kobject 'sdb1'
[  110.654464] Modules linked in:
[  110.655326] CPU: 0 PID: 978 Comm: kworker/0:2 Tainted: G        W    3.13.0-rc1+ #49
[  110.656216] Hardware name:                  /D33217CK, BIOS GKPPT10H.86A.0042.2013.0422.1439 04/22/2013
[  110.657132] Workqueue: kacpi_hotplug acpi_hotplug_work_fn
[  110.658053]  0000000000000009 ffff88006e1bd878 ffffffff8180b8df ffff88006e1bd8c0
[  110.659007]  ffff88006e1bd8b0 ffffffff81044b28 0000000000000000 ffffffff81e3b440
[  110.659972]  ffff88006df4dc38 ffffffff81e5ab40 ffff88006e935c28 ffff88006e1bd910
[  110.660943] Call Trace:
[  110.661888]  [<ffffffff8180b8df>] dump_stack+0x45/0x56
[  110.662852]  [<ffffffff81044b28>] warn_slowpath_common+0x78/0xa0
[  110.663819]  [<ffffffff81044b97>] warn_slowpath_fmt+0x47/0x50
[  110.664780]  [<ffffffff811b0839>] ? sysfs_get_dirent_ns+0x49/0x70
[  110.665745]  [<ffffffff811b1a76>] sysfs_remove_group+0xc6/0xd0
[  110.666711]  [<ffffffff811b1b3b>] sysfs_remove_groups+0x2b/0x40
[  110.667671]  [<ffffffff81440499>] device_remove_attrs+0x59/0x80
[  110.668635]  [<ffffffff81440f39>] device_del+0x119/0x1b0
[  110.669600]  [<ffffffff812ba063>] delete_partition+0x43/0x80
[  110.670565]  [<ffffffff812b8648>] del_gendisk+0xb8/0x290
[  110.671524]  [<ffffffff8146b4fb>] sd_remove+0x6b/0xd0
[  110.672477]  [<ffffffff81444944>] __device_release_driver+0x64/0xd0
[  110.673437]  [<ffffffff814449ce>] device_release_driver+0x1e/0x30
[  110.674395]  [<ffffffff81444290>] bus_remove_device+0x100/0x180
[  110.675359]  [<ffffffff81440f41>] device_del+0x121/0x1b0
[  110.676337]  [<ffffffff814644b5>] __scsi_remove_device+0xb5/0xc0
[  110.677321]  [<ffffffff81462bc4>] scsi_forget_host+0x64/0x70
[  110.678299]  [<ffffffff81458cae>] scsi_remove_host+0x5e/0x110
[  110.679281]  [<ffffffff81476f56>] ata_host_detach+0xc6/0x100
[  110.680277]  [<ffffffff81476fa8>] ata_pci_remove_one+0x18/0x20
[  110.681276]  [<ffffffff812f1638>] pci_device_remove+0x28/0x60
[  110.682270]  [<ffffffff81444944>] __device_release_driver+0x64/0xd0
[  110.683273]  [<ffffffff814449ce>] device_release_driver+0x1e/0x30
[  110.684275]  [<ffffffff812ecaa4>] pci_stop_bus_device+0x94/0xa0
[  110.685272]  [<ffffffff812eca4b>] pci_stop_bus_device+0x3b/0xa0
[  110.686259]  [<ffffffff812eca4b>] pci_stop_bus_device+0x3b/0xa0
[  110.687232]  [<ffffffff812ecbad>] pci_stop_and_remove_bus_device+0xd/0x20
[  110.688208]  [<ffffffff813050b3>] trim_stale_devices+0x73/0xe0
[  110.689185]  [<ffffffff813050fb>] trim_stale_devices+0xbb/0xe0
[  110.690150]  [<ffffffff813050fb>] trim_stale_devices+0xbb/0xe0
[  110.691100]  [<ffffffff813054de>] acpiphp_check_bridge+0x7e/0xd0
[  110.692038]  [<ffffffff8130631f>] hotplug_event+0xff/0x240
[  110.692980]  [<ffffffff81306485>] hotplug_event_work+0x25/0x60
[  110.693891]  [<ffffffff8131f3f9>] acpi_hotplug_work_fn+0x17/0x22
[  110.694793]  [<ffffffff8105e11a>] process_one_work+0x17a/0x440
[  110.695690]  [<ffffffff8105ed19>] worker_thread+0x119/0x390
[  110.696575]  [<ffffffff8105ec00>] ? manage_workers.isra.25+0x2a0/0x2a0
[  110.697447]  [<ffffffff81064d0d>] kthread+0xcd/0xf0
[  110.698290]  [<ffffffff81064c40>] ? kthread_create_on_node+0x180/0x180
[  110.699131]  [<ffffffff8181c43c>] ret_from_fork+0x7c/0xb0
[  110.699959]  [<ffffffff81064c40>] ? kthread_create_on_node+0x180/0x180
[  110.700785] ---[ end trace 47aef14bd4d46426 ]---
[  110.701662] ------------[ cut here ]------------
[  110.702538] WARNING: CPU: 0 PID: 978 at fs/sysfs/group.c:214 sysfs_remove_group+0xc6/0xd0()
[  110.703387] sysfs group ffffffff81e3b440 not found for kobject 'sdb'
[  110.704245] Modules linked in:
[  110.705102] CPU: 0 PID: 978 Comm: kworker/0:2 Tainted: G        W    3.13.0-rc1+ #49
[  110.705984] Hardware name:                  /D33217CK, BIOS GKPPT10H.86A.0042.2013.0422.1439 04/22/2013
[  110.706895] Workqueue: kacpi_hotplug acpi_hotplug_work_fn
[  110.707817]  0000000000000009 ffff88006e1bd8e8 ffffffff8180b8df ffff88006e1bd930
[  110.708775]  ffff88006e1bd920 ffffffff81044b28 0000000000000000 ffffffff81e3b440
[  110.709741]  ffff88006d40d080 0000000000800010 ffff88006e935c28 ffff88006e1bd980
[  110.710722] Call Trace:
[  110.711680]  [<ffffffff8180b8df>] dump_stack+0x45/0x56
[  110.712651]  [<ffffffff81044b28>] warn_slowpath_common+0x78/0xa0
[  110.713629]  [<ffffffff81044b97>] warn_slowpath_fmt+0x47/0x50
[  110.714602]  [<ffffffff811b0839>] ? sysfs_get_dirent_ns+0x49/0x70
[  110.715578]  [<ffffffff811b1a76>] sysfs_remove_group+0xc6/0xd0
[  110.716553]  [<ffffffff810db824>] blk_trace_remove_sysfs+0x14/0x20
[  110.717531]  [<ffffffff812ade80>] blk_unregister_queue+0x60/0x90
[  110.718515]  [<ffffffff812b86b9>] del_gendisk+0x129/0x290
[  110.719498]  [<ffffffff8146b4fb>] sd_remove+0x6b/0xd0
[  110.720480]  [<ffffffff81444944>] __device_release_driver+0x64/0xd0
[  110.721471]  [<ffffffff814449ce>] device_release_driver+0x1e/0x30
[  110.722458]  [<ffffffff81444290>] bus_remove_device+0x100/0x180
[  110.723448]  [<ffffffff81440f41>] device_del+0x121/0x1b0
[  110.724434]  [<ffffffff814644b5>] __scsi_remove_device+0xb5/0xc0
[  110.725436]  [<ffffffff81462bc4>] scsi_forget_host+0x64/0x70
[  110.726449]  [<ffffffff81458cae>] scsi_remove_host+0x5e/0x110
[  110.727455]  [<ffffffff81476f56>] ata_host_detach+0xc6/0x100
[  110.728453]  [<ffffffff81476fa8>] ata_pci_remove_one+0x18/0x20
[  110.729465]  [<ffffffff812f1638>] pci_device_remove+0x28/0x60
[  110.730490]  [<ffffffff81444944>] __device_release_driver+0x64/0xd0
[  110.731519]  [<ffffffff814449ce>] device_release_driver+0x1e/0x30
[  110.732545]  [<ffffffff812ecaa4>] pci_stop_bus_device+0x94/0xa0
[  110.733582]  [<ffffffff812eca4b>] pci_stop_bus_device+0x3b/0xa0
[  110.734608]  [<ffffffff812eca4b>] pci_stop_bus_device+0x3b/0xa0
[  110.735621]  [<ffffffff812ecbad>] pci_stop_and_remove_bus_device+0xd/0x20
[  110.736636]  [<ffffffff813050b3>] trim_stale_devices+0x73/0xe0
[  110.737648]  [<ffffffff813050fb>] trim_stale_devices+0xbb/0xe0
[  110.738649]  [<ffffffff813050fb>] trim_stale_devices+0xbb/0xe0
[  110.739634]  [<ffffffff813054de>] acpiphp_check_bridge+0x7e/0xd0
[  110.740619]  [<ffffffff8130631f>] hotplug_event+0xff/0x240
[  110.741601]  [<ffffffff81306485>] hotplug_event_work+0x25/0x60
[  110.742569]  [<ffffffff8131f3f9>] acpi_hotplug_work_fn+0x17/0x22
[  110.743543]  [<ffffffff8105e11a>] process_one_work+0x17a/0x440
[  110.744498]  [<ffffffff8105ed19>] worker_thread+0x119/0x390
[  110.745438]  [<ffffffff8105ec00>] ? manage_workers.isra.25+0x2a0/0x2a0
[  110.746374]  [<ffffffff81064d0d>] kthread+0xcd/0xf0
[  110.747295]  [<ffffffff81064c40>] ? kthread_create_on_node+0x180/0x180
[  110.748206]  [<ffffffff8181c43c>] ret_from_fork+0x7c/0xb0
[  110.749092]  [<ffffffff81064c40>] ? kthread_create_on_node+0x180/0x180
[  110.749964] ---[ end trace 47aef14bd4d46427 ]---
[  110.750837] ------------[ cut here ]------------
[  110.751694] WARNING: CPU: 0 PID: 978 at fs/sysfs/group.c:214 sysfs_remove_group+0xc6/0xd0()
[  110.752570] sysfs group ffffffff81e6f940 not found for kobject 'sdb'
[  110.753453] Modules linked in:
[  110.754328] CPU: 0 PID: 978 Comm: kworker/0:2 Tainted: G        W    3.13.0-rc1+ #49
[  110.755237] Hardware name:                  /D33217CK, BIOS GKPPT10H.86A.0042.2013.0422.1439 04/22/2013
[  110.756175] Workqueue: kacpi_hotplug acpi_hotplug_work_fn
[  110.757119]  0000000000000009 ffff88006e1bd8d0 ffffffff8180b8df ffff88006e1bd918
[  110.758095]  ffff88006e1bd908 ffffffff81044b28 0000000000000000 ffffffff81e6f940
[  110.759079]  ffff88006d40d080 ffff8801003b7948 ffff88006e935c28 ffff88006e1bd968
[  110.760071] Call Trace:
[  110.761039]  [<ffffffff8180b8df>] dump_stack+0x45/0x56
[  110.762024]  [<ffffffff81044b28>] warn_slowpath_common+0x78/0xa0
[  110.763014]  [<ffffffff81044b97>] warn_slowpath_fmt+0x47/0x50
[  110.763994]  [<ffffffff811b0839>] ? sysfs_get_dirent_ns+0x49/0x70
[  110.764971]  [<ffffffff811b1a76>] sysfs_remove_group+0xc6/0xd0
[  110.765955]  [<ffffffff8144a39e>] dpm_sysfs_remove+0x3e/0x50
[  110.766939]  [<ffffffff81440e60>] device_del+0x40/0x1b0
[  110.767923]  [<ffffffff812b87ef>] del_gendisk+0x25f/0x290
[  110.768906]  [<ffffffff8146b4fb>] sd_remove+0x6b/0xd0
[  110.769892]  [<ffffffff81444944>] __device_release_driver+0x64/0xd0
[  110.770880]  [<ffffffff814449ce>] device_release_driver+0x1e/0x30
[  110.771867]  [<ffffffff81444290>] bus_remove_device+0x100/0x180
[  110.772853]  [<ffffffff81440f41>] device_del+0x121/0x1b0
[  110.773838]  [<ffffffff814644b5>] __scsi_remove_device+0xb5/0xc0
[  110.774839]  [<ffffffff81462bc4>] scsi_forget_host+0x64/0x70
[  110.775856]  [<ffffffff81458cae>] scsi_remove_host+0x5e/0x110
[  110.776863]  [<ffffffff81476f56>] ata_host_detach+0xc6/0x100
[  110.777864]  [<ffffffff81476fa8>] ata_pci_remove_one+0x18/0x20
[  110.778876]  [<ffffffff812f1638>] pci_device_remove+0x28/0x60
[  110.779900]  [<ffffffff81444944>] __device_release_driver+0x64/0xd0
[  110.780926]  [<ffffffff814449ce>] device_release_driver+0x1e/0x30
[  110.781950]  [<ffffffff812ecaa4>] pci_stop_bus_device+0x94/0xa0
[  110.782977]  [<ffffffff812eca4b>] pci_stop_bus_device+0x3b/0xa0
[  110.783998]  [<ffffffff812eca4b>] pci_stop_bus_device+0x3b/0xa0
[  110.785008]  [<ffffffff812ecbad>] pci_stop_and_remove_bus_device+0xd/0x20
[  110.786019]  [<ffffffff813050b3>] trim_stale_devices+0x73/0xe0
[  110.787029]  [<ffffffff813050fb>] trim_stale_devices+0xbb/0xe0
[  110.788022]  [<ffffffff813050fb>] trim_stale_devices+0xbb/0xe0
[  110.788995]  [<ffffffff813054de>] acpiphp_check_bridge+0x7e/0xd0
[  110.789968]  [<ffffffff8130631f>] hotplug_event+0xff/0x240
[  110.790940]  [<ffffffff81306485>] hotplug_event_work+0x25/0x60
[  110.791899]  [<ffffffff8131f3f9>] acpi_hotplug_work_fn+0x17/0x22
[  110.792861]  [<ffffffff8105e11a>] process_one_work+0x17a/0x440
[  110.793808]  [<ffffffff8105ed19>] worker_thread+0x119/0x390
[  110.794738]  [<ffffffff8105ec00>] ? manage_workers.isra.25+0x2a0/0x2a0
[  110.795665]  [<ffffffff81064d0d>] kthread+0xcd/0xf0
[  110.796575]  [<ffffffff81064c40>] ? kthread_create_on_node+0x180/0x180
[  110.797472]  [<ffffffff8181c43c>] ret_from_fork+0x7c/0xb0
[  110.798344]  [<ffffffff81064c40>] ? kthread_create_on_node+0x180/0x180
[  110.799210] ---[ end trace 47aef14bd4d46428 ]---
[  110.853802] sd 8:0:0:0: [sdb] Synchronizing SCSI cache
[  110.854741] sd 8:0:0:0: [sdb]  
[  110.855575] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[  110.856424] sd 8:0:0:0: [sdb] Stopping disk
[  110.857277] sd 8:0:0:0: [sdb] START_STOP FAILED
[  110.858121] sd 8:0:0:0: [sdb]  
[  110.858947] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[  110.859940] ------------[ cut here ]------------
[  110.860825] WARNING: CPU: 0 PID: 978 at fs/sysfs/group.c:214 sysfs_remove_group+0xc6/0xd0()
[  110.861703] sysfs group ffffffff81e6f940 not found for kobject 'target8:0:0'
[  110.862591] Modules linked in:
[  110.863477] CPU: 0 PID: 978 Comm: kworker/0:2 Tainted: G        W    3.13.0-rc1+ #49
[  110.864392] Hardware name:                  /D33217CK, BIOS GKPPT10H.86A.0042.2013.0422.1439 04/22/2013
[  110.865336] Workqueue: kacpi_hotplug acpi_hotplug_work_fn
[  110.866288]  0000000000000009 ffff88006e1bd8a0 ffffffff8180b8df ffff88006e1bd8e8
[  110.867272]  ffff88006e1bd8d8 ffffffff81044b28 0000000000000000 ffffffff81e6f940
[  110.868265]  ffff88006d40ec38 ffff88006d480188 ffff8801003b7800 ffff88006e1bd938
[  110.869263] Call Trace:
[  110.870243]  [<ffffffff8180b8df>] dump_stack+0x45/0x56
[  110.871237]  [<ffffffff81044b28>] warn_slowpath_common+0x78/0xa0
[  110.872241]  [<ffffffff81044b97>] warn_slowpath_fmt+0x47/0x50
[  110.873235]  [<ffffffff811b0839>] ? sysfs_get_dirent_ns+0x49/0x70
[  110.874237]  [<ffffffff811b1a76>] sysfs_remove_group+0xc6/0xd0
[  110.875237]  [<ffffffff8144a39e>] dpm_sysfs_remove+0x3e/0x50
[  110.876231]  [<ffffffff81440e60>] device_del+0x40/0x1b0
[  110.877231]  [<ffffffff81460ad2>] scsi_target_reap_usercontext+0x22/0x30
[  110.878257]  [<ffffffff8105d99f>] execute_in_process_context+0x5f/0x70
[  110.879288]  [<ffffffff81461d4c>] scsi_target_reap+0xbc/0xe0
[  110.880310]  [<ffffffff81463b48>] scsi_device_dev_release_usercontext+0x188/0x1c0
[  110.881359]  [<ffffffff8105d99f>] execute_in_process_context+0x5f/0x70
[  110.882426]  [<ffffffff814639b7>] scsi_device_dev_release+0x17/0x20
[  110.883500]  [<ffffffff8144054d>] device_release+0x2d/0xa0
[  110.884570]  [<ffffffff812c82f7>] kobject_cleanup+0x77/0x1b0
[  110.885643]  [<ffffffff812c81a5>] kobject_put+0x35/0x70
[  110.886711]  [<ffffffff81440812>] put_device+0x12/0x20
[  110.887772]  [<ffffffff81464489>] __scsi_remove_device+0x89/0xc0
[  110.888839]  [<ffffffff81462bc4>] scsi_forget_host+0x64/0x70
[  110.889904]  [<ffffffff81458cae>] scsi_remove_host+0x5e/0x110
[  110.890959]  [<ffffffff81476f56>] ata_host_detach+0xc6/0x100
[  110.892009]  [<ffffffff81476fa8>] ata_pci_remove_one+0x18/0x20
[  110.893053]  [<ffffffff812f1638>] pci_device_remove+0x28/0x60
[  110.894100]  [<ffffffff81444944>] __device_release_driver+0x64/0xd0
[  110.895135]  [<ffffffff814449ce>] device_release_driver+0x1e/0x30
[  110.896168]  [<ffffffff812ecaa4>] pci_stop_bus_device+0x94/0xa0
[  110.897204]  [<ffffffff812eca4b>] pci_stop_bus_device+0x3b/0xa0
[  110.898223]  [<ffffffff812eca4b>] pci_stop_bus_device+0x3b/0xa0
[  110.899223]  [<ffffffff812ecbad>] pci_stop_and_remove_bus_device+0xd/0x20
[  110.900232]  [<ffffffff813050b3>] trim_stale_devices+0x73/0xe0
[  110.901253]  [<ffffffff813050fb>] trim_stale_devices+0xbb/0xe0
[  110.902261]  [<ffffffff813050fb>] trim_stale_devices+0xbb/0xe0
[  110.903247]  [<ffffffff813054de>] acpiphp_check_bridge+0x7e/0xd0
[  110.904218]  [<ffffffff8130631f>] hotplug_event+0xff/0x240
[  110.905174]  [<ffffffff81306485>] hotplug_event_work+0x25/0x60
[  110.906111]  [<ffffffff8131f3f9>] acpi_hotplug_work_fn+0x17/0x22
[  110.907035]  [<ffffffff8105e11a>] process_one_work+0x17a/0x440
[  110.907943]  [<ffffffff8105ed19>] worker_thread+0x119/0x390
[  110.908824]  [<ffffffff8105ec00>] ? manage_workers.isra.25+0x2a0/0x2a0
[  110.909697]  [<ffffffff81064d0d>] kthread+0xcd/0xf0
[  110.910555]  [<ffffffff81064c40>] ? kthread_create_on_node+0x180/0x180
[  110.911415]  [<ffffffff8181c43c>] ret_from_fork+0x7c/0xb0
[  110.912257]  [<ffffffff81064c40>] ? kthread_create_on_node+0x180/0x180
[  110.913106] ---[ end trace 47aef14bd4d46429 ]---
[  110.913993] ------------[ cut here ]------------
[  110.914890] WARNING: CPU: 0 PID: 978 at fs/sysfs/group.c:214 sysfs_remove_group+0xc6/0xd0()
[  110.915774] sysfs group ffffffff81e6f940 not found for kobject 'host8'
[  110.916659] Modules linked in:
[  110.917541] CPU: 0 PID: 978 Comm: kworker/0:2 Tainted: G        W    3.13.0-rc1+ #49
[  110.918459] Hardware name:                  /D33217CK, BIOS GKPPT10H.86A.0042.2013.0422.1439 04/22/2013
[  110.919404] Workqueue: kacpi_hotplug acpi_hotplug_work_fn
[  110.920351]  0000000000000009 ffff88006e1bda00 ffffffff8180b8df ffff88006e1bda48
[  110.921326]  ffff88006e1bda38 ffffffff81044b28 0000000000000000 ffffffff81e6f940
[  110.922307]  ffff88006d480358 ffff88006d480188 ffff88006e935c28 ffff88006e1bda98
[  110.923283] Call Trace:
[  110.924235]  [<ffffffff8180b8df>] dump_stack+0x45/0x56
[  110.925202]  [<ffffffff81044b28>] warn_slowpath_common+0x78/0xa0
[  110.926177]  [<ffffffff81044b97>] warn_slowpath_fmt+0x47/0x50
[  110.927146]  [<ffffffff811b0839>] ? sysfs_get_dirent_ns+0x49/0x70
[  110.928125]  [<ffffffff811b1a76>] sysfs_remove_group+0xc6/0xd0
[  110.929104]  [<ffffffff8144a39e>] dpm_sysfs_remove+0x3e/0x50
[  110.930077]  [<ffffffff81440e60>] device_del+0x40/0x1b0
[  110.931058]  [<ffffffff81440fe9>] device_unregister+0x19/0x60
[  110.932040]  [<ffffffff81458d0a>] scsi_remove_host+0xba/0x110
[  110.933027]  [<ffffffff81476f56>] ata_host_detach+0xc6/0x100
[  110.934011]  [<ffffffff81476fa8>] ata_pci_remove_one+0x18/0x20
[  110.934995]  [<ffffffff812f1638>] pci_device_remove+0x28/0x60
[  110.935974]  [<ffffffff81444944>] __device_release_driver+0x64/0xd0
[  110.936955]  [<ffffffff814449ce>] device_release_driver+0x1e/0x30
[  110.937950]  [<ffffffff812ecaa4>] pci_stop_bus_device+0x94/0xa0
[  110.938959]  [<ffffffff812eca4b>] pci_stop_bus_device+0x3b/0xa0
[  110.939955]  [<ffffffff812eca4b>] pci_stop_bus_device+0x3b/0xa0
[  110.940930]  [<ffffffff812ecbad>] pci_stop_and_remove_bus_device+0xd/0x20
[  110.941921]  [<ffffffff813050b3>] trim_stale_devices+0x73/0xe0
[  110.942929]  [<ffffffff813050fb>] trim_stale_devices+0xbb/0xe0
[  110.943923]  [<ffffffff813050fb>] trim_stale_devices+0xbb/0xe0
[  110.944899]  [<ffffffff813054de>] acpiphp_check_bridge+0x7e/0xd0
[  110.945882]  [<ffffffff8130631f>] hotplug_event+0xff/0x240
[  110.946866]  [<ffffffff81306485>] hotplug_event_work+0x25/0x60
[  110.947844]  [<ffffffff8131f3f9>] acpi_hotplug_work_fn+0x17/0x22
[  110.948826]  [<ffffffff8105e11a>] process_one_work+0x17a/0x440
[  110.949806]  [<ffffffff8105ed19>] worker_thread+0x119/0x390
[  110.950786]  [<ffffffff8105ec00>] ? manage_workers.isra.25+0x2a0/0x2a0
[  110.951767]  [<ffffffff81064d0d>] kthread+0xcd/0xf0
[  110.952744]  [<ffffffff81064c40>] ? kthread_create_on_node+0x180/0x180
[  110.953730]  [<ffffffff8181c43c>] ret_from_fork+0x7c/0xb0
[  110.954703]  [<ffffffff81064c40>] ? kthread_create_on_node+0x180/0x180
[  110.955689] ---[ end trace 47aef14bd4d4642a ]---
[  110.956672] ------------[ cut here ]------------
[  110.957671] WARNING: CPU: 0 PID: 978 at fs/sysfs/group.c:214 sysfs_remove_group+0xc6/0xd0()
[  110.958647] sysfs group ffffffff81e6f940 not found for kobject 'host8'
[  110.959621] Modules linked in:
[  110.960571] CPU: 0 PID: 978 Comm: kworker/0:2 Tainted: G        W    3.13.0-rc1+ #49
[  110.961524] Hardware name:                  /D33217CK, BIOS GKPPT10H.86A.0042.2013.0422.1439 04/22/2013
[  110.962497] Workqueue: kacpi_hotplug acpi_hotplug_work_fn
[  110.963466]  0000000000000009 ffff88006e1bda18 ffffffff8180b8df ffff88006e1bda60
[  110.964462]  ffff88006e1bda50 ffffffff81044b28 0000000000000000 ffffffff81e6f940
[  110.965455]  ffff88006d480198 ffff88006d4f2ed8 ffff88006e935c28 ffff88006e1bdab0
[  110.966450] Call Trace:
[  110.967418]  [<ffffffff8180b8df>] dump_stack+0x45/0x56
[  110.968411]  [<ffffffff81044b28>] warn_slowpath_common+0x78/0xa0
[  110.969406]  [<ffffffff81044b97>] warn_slowpath_fmt+0x47/0x50
[  110.970391]  [<ffffffff811b0839>] ? sysfs_get_dirent_ns+0x49/0x70
[  110.971374]  [<ffffffff811b1a76>] sysfs_remove_group+0xc6/0xd0
[  110.972365]  [<ffffffff8144a39e>] dpm_sysfs_remove+0x3e/0x50
[  110.973360]  [<ffffffff81440e60>] device_del+0x40/0x1b0
[  110.974349]  [<ffffffff81458d12>] scsi_remove_host+0xc2/0x110
[  110.975341]  [<ffffffff81476f56>] ata_host_detach+0xc6/0x100
[  110.976332]  [<ffffffff81476fa8>] ata_pci_remove_one+0x18/0x20
[  110.977326]  [<ffffffff812f1638>] pci_device_remove+0x28/0x60
[  110.978317]  [<ffffffff81444944>] __device_release_driver+0x64/0xd0
[  110.979311]  [<ffffffff814449ce>] device_release_driver+0x1e/0x30
[  110.980302]  [<ffffffff812ecaa4>] pci_stop_bus_device+0x94/0xa0
[  110.981305]  [<ffffffff812eca4b>] pci_stop_bus_device+0x3b/0xa0
[  110.982311]  [<ffffffff812eca4b>] pci_stop_bus_device+0x3b/0xa0
[  110.983304]  [<ffffffff812ecbad>] pci_stop_and_remove_bus_device+0xd/0x20
[  110.984296]  [<ffffffff813050b3>] trim_stale_devices+0x73/0xe0
[  110.985303]  [<ffffffff813050fb>] trim_stale_devices+0xbb/0xe0
[  110.986312]  [<ffffffff813050fb>] trim_stale_devices+0xbb/0xe0
[  110.987309]  [<ffffffff813054de>] acpiphp_check_bridge+0x7e/0xd0
[  110.988304]  [<ffffffff8130631f>] hotplug_event+0xff/0x240
[  110.989304]  [<ffffffff81306485>] hotplug_event_work+0x25/0x60
[  110.990296]  [<ffffffff8131f3f9>] acpi_hotplug_work_fn+0x17/0x22
[  110.991284]  [<ffffffff8105e11a>] process_one_work+0x17a/0x440
[  110.992274]  [<ffffffff8105ed19>] worker_thread+0x119/0x390
[  110.993263]  [<ffffffff8105ec00>] ? manage_workers.isra.25+0x2a0/0x2a0
[  110.994256]  [<ffffffff81064d0d>] kthread+0xcd/0xf0
[  110.995241]  [<ffffffff81064c40>] ? kthread_create_on_node+0x180/0x180
[  110.996234]  [<ffffffff8181c43c>] ret_from_fork+0x7c/0xb0
[  110.997221]  [<ffffffff81064c40>] ? kthread_create_on_node+0x180/0x180
[  110.998208] ---[ end trace 47aef14bd4d4642b ]---
[  111.499504] ata7: failed to stop engine (-5)
[  112.000839] ata8: failed to stop engine (-5)
[  112.001994] pcieport 0000:06:03.0: PME# disabled
[  112.003058] pcieport 0000:05:00.0: PME# disabled
[  112.004198] pci_bus 0000:07: busn_res: [bus 07] is released
[  112.013864] pci_bus 0000:0a: busn_res: [bus 0a] is released
[  112.014833] pci_bus 0000:09: busn_res: [bus 09-2e] is released
[  112.015789] pci_bus 0000:08: busn_res: [bus 08-2e] is released
[  112.016728] pci_bus 0000:2f: busn_res: [bus 2f] is released
[  112.017658] pci_bus 0000:06: busn_res: [bus 06-2f] is released
[  112.018571] pcieport 0000:03:04.0: PME# disabled
[  112.019548] pci_bus 0000:30: busn_res: [bus 30-38] is released
[  112.020446] pcieport 0000:03:05.0: PME# disabled
[  112.021431] pci_bus 0000:39: busn_res: [bus 39] is released
[  112.022339] pcieport 0000:03:06.0: PME# disabled
[  112.023328] pci_bus 0000:3a: busn_res: [bus 3a] is released
[  112.024263] pcieport 0000:02:00.0: scanning [bus ff-ff] behind bridge, pass 0
[  112.025159] pcieport 0000:02:00.0: bridge configuration invalid ([bus ff-ff]), reconfiguring
[  112.026022] pcieport 0000:02:00.0: scanning [bus ff-ff] behind bridge, pass 1
[  112.026883] pci_bus 0000:03: Allocating resources
[  112.027745] pcieport 0000:03:00.0: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
[  112.028637] pcieport 0000:03:00.0: bridge window [mem 0x00100000-0x000fffff pref] to [bus 04] add_size 200000
[  112.029566] pcieport 0000:03:00.0: res[9]=[mem 0x00100000-0x000fffff pref] get_res_add_size add_size 200000
[  112.030482] pcieport 0000:03:00.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[  112.031409] pcieport 0000:03:00.0: BAR 9: assigned [mem 0xca000000-0xca1fffff pref]
[  112.032352] pcieport 0000:03:00.0: BAR 7: can't assign io (size 0x1000)
[  112.033306] pcieport 0000:03:00.0: BAR 7: can't assign io (size 0x1000)
[  112.034250] pcieport 0000:02:00.0: Max Payload Size 16384, but upstream 0000:00:1c.4 set to 128; if necessary, use "pci=pcie_bus_safe" and report a bug
[  112.036242] pcieport 0000:02:00.0: Max Payload Size 16384, but upstream 0000:00:1c.4 set to 128; if necessary, use "pci=pcie_bus_safe" and report a bug
[  112.038404] pcieport 0000:02:00.0: Max Payload Size 16384, but upstream 0000:00:1c.4 set to 128; if necessary, use "pci=pcie_bus_safe" and report a bug
[  112.040710] acpiphp_glue: hotplug_event: Bus check notify on \_SB_.PCI0.RP05
[  112.041889] acpiphp_glue: hotplug_event: re-enumerating slots under \_SB_.PCI0.RP05
[  112.043076] pcieport 0000:03:03.0: PME# disabled
[  112.044380] pcieport 0000:03:00.0: PME# disabled
[  112.045702] pcieport 0000:02:00.0: PME# disabled
[  112.047015] pci_bus 0000:04: busn_res: [bus 04] is released
[  112.048254] pci_bus 0000:05: busn_res: [bus 05-2f] is released
[  112.049505] pci_bus 0000:03: busn_res: [bus 03-3a] is released
[  112.050792] acpiphp_glue: hotplug_event: Bus check notify on \_SB_.PCI0.RP05
[  112.052003] acpiphp_glue: hotplug_event: re-enumerating slots under \_SB_.PCI0.RP05
[  112.053145] acpiphp_glue: hotplug_event: Bus check notify on \_SB_.PCI0.RP05
[  112.054289] acpiphp_glue: hotplug_event: re-enumerating slots under \_SB_.PCI0.RP05
[  127.969485] random: nonblocking pool is initialized

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH] PCI: Move device_del() from pci_stop_dev() to pci_destroy_dev()
  2013-11-25  9:47       ` Mika Westerberg
@ 2013-11-25 11:24         ` Rafael J. Wysocki
  0 siblings, 0 replies; 17+ messages in thread
From: Rafael J. Wysocki @ 2013-11-25 11:24 UTC (permalink / raw)
  To: Mika Westerberg
  Cc: Bjorn Helgaas, Greg Kroah-Hartman, Tejun Heo,
	linux-kernel@vger.kernel.org, Linux PCI

On Monday, November 25, 2013 11:47:07 AM Mika Westerberg wrote:
> On Sun, Nov 24, 2013 at 01:17:52AM +0100, Rafael J. Wysocki wrote:
> > From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> > 
> > After commit bcdde7e221a8 (sysfs: make __sysfs_remove_dir() recursive)
> > I'm seeing traces analogous to the one below in Thunderbolt testing:
> > 
> > WARNING: CPU: 3 PID: 76 at /scratch/rafael/work/linux-pm/fs/sysfs/group.c:214 sysfs_remove_group+0x59/0xe0()
> >  sysfs group ffffffff81c6c500 not found for kobject '0000:08'
> >  Modules linked in: fuse hidp af_packet xt_tcpudp xt_pkttype xt_LOG xt_limit ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_raw ipt_REJECT iptable_raw xt_CT iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_broadcast nf_conntrack_ipv4 nf_defrag_ipv4 ip_tables xt_conntrack nf_conntrack rfcomm ip6table_filter bnep ip6_tables x_tables arc4 ath9k mac80211 x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul iTCO_wdt crc32c_intel iTCO_vendor_support ghash_clmulni_intel aesni_intel ablk_helper acer_wmi sparse_keymap ath9k_common ath9k_hw cryptd lrw gf128mul ath3k glue_helper aes_x86_64 btusb microcode ath pcspkr joydev uvcvideo serio_raw videobuf2_core i2c_i801 videodev snd_hda_codec_hdmi cfg80211 videobuf2_vmalloc tg3 videobuf2_memops sg ptp pps_core lpc_ich mfd_core snd_hda_codec_realtek bluetooth hid_logitech_dj rfkill snd_hda_intel snd_hda_codec shpchp battery ac wmi acpi_cpufreq edd snd_usb_audio snd_pcm snd_page_alloc snd_hwdep snd_usbmidi_lib 
> > snd_rawmidi snd_seq snd_timer snd_seq_device snd soundcore autofs4 xhci_hcd processor scsi_dh_hp_sw scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_dh
> >  CPU: 3 PID: 76 Comm: kworker/u16:7 Not tainted 3.13.0-rc1+ #76
> >  Hardware name: Acer Aspire S5-391/Venus    , BIOS V1.02 05/29/2012
> >  Workqueue: kacpi_hotplug acpi_hotplug_work_fn
> >   0000000000000009 ffff8801644b9ac8 ffffffff816b23bf 0000000000000007
> >   ffff8801644b9b18 ffff8801644b9b08 ffffffff81046607 ffff88016925b800
> >   0000000000000000 ffffffff81c6c500 ffff88016924f928 ffff88016924f800
> >  Call Trace:
> >   [<ffffffff816b23bf>] dump_stack+0x4e/0x71
> >   [<ffffffff81046607>] warn_slowpath_common+0x87/0xb0
> >   [<ffffffff810466d1>] warn_slowpath_fmt+0x41/0x50
> >   [<ffffffff811e42ef>] ? sysfs_get_dirent_ns+0x6f/0x80
> >   [<ffffffff811e5389>] sysfs_remove_group+0x59/0xe0
> >   [<ffffffff8149f00b>] dpm_sysfs_remove+0x3b/0x50
> >   [<ffffffff81495818>] device_del+0x58/0x1c0
> >   [<ffffffff814959c8>] device_unregister+0x48/0x60
> >   [<ffffffff813254fe>] pci_remove_bus+0x6e/0x80
> >   [<ffffffff81325548>] pci_remove_bus_device+0x38/0x110
> >   [<ffffffff8132555d>] pci_remove_bus_device+0x4d/0x110
> >   [<ffffffff81325639>] pci_stop_and_remove_bus_device+0x19/0x20
> >   [<ffffffff813418d0>] disable_slot+0x20/0xe0
> >   [<ffffffff81341a38>] acpiphp_check_bridge+0xa8/0xd0
> >   [<ffffffff813427ad>] hotplug_event+0x17d/0x220
> >   [<ffffffff81342880>] hotplug_event_work+0x30/0x70
> >   [<ffffffff8136d665>] acpi_hotplug_work_fn+0x18/0x24
> >   [<ffffffff81061331>] process_one_work+0x261/0x450
> >   [<ffffffff81061a7e>] worker_thread+0x21e/0x370
> >   [<ffffffff81061860>] ? rescuer_thread+0x300/0x300
> >   [<ffffffff81068342>] kthread+0xd2/0xe0
> >   [<ffffffff81068270>] ? flush_kthread_worker+0x70/0x70
> >   [<ffffffff816c19bc>] ret_from_fork+0x7c/0xb0
> >   [<ffffffff81068270>] ? flush_kthread_worker+0x70/0x70
> > 
> > (Mika Westerberg sees them too in his tests).
> > 
> > Some investigation documented in kernel bug #65281 lead me to the
> > conclusion that the source of the problem is the device_del() in
> > pci_stop_dev() as it now causes the sysfs directory of the device
> > to be removed recursively along with all of its subdirectories.
> > That includes the sysfs directory of the device's subordinate
> > bus (dev->subordinate) and its "power" group.
> > 
> > Consequently, when pci_remove_bus() is called for dev->subordinate
> > in pci_remove_bus_device(), it calls device_unregister(&bus->dev),
> > but at this point the sysfs directory of bus->dev doesn't exist any
> > more and its "power" group doesn't exist either.  Thus, when
> > dpm_sysfs_remove() called from device_del() tries to remove that
> > group, it triggers the above warning.
> > 
> > That indicates a logical mistake in the design of
> > pci_stop_and_remove_bus_device(), which causes bus device objects
> > to be left behind their parents (bridge device objects) and can be
> > fixed by moving the device_del() from pci_stop_dev() into
> > pci_destroy_dev(), so pci_remove_bus() can be called for the
> > device's subordinate bus before the device itself is unregistered
> > from the hierarchy.  Still, the driver, if any, should be detached
> > from the device in pci_stop_dev(), so use device_release_driver()
> > directly from there.
> 
> With only this patch applied, I can still see the warnings :-/ I'm going to
> test the ata fix you proposed soon.

Yes, you need both this one and the ATA fix.

Thanks,
Rafael


^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH] PCI: Move device_del() from pci_stop_dev() to pci_destroy_dev()
  2013-11-24  0:17     ` [PATCH] PCI: Move device_del() from pci_stop_dev() to pci_destroy_dev() Rafael J. Wysocki
  2013-11-25  4:54       ` Yinghai Lu
  2013-11-25  9:47       ` Mika Westerberg
@ 2013-11-25 21:59       ` Bjorn Helgaas
  2013-11-25 22:19         ` Rafael J. Wysocki
  2013-11-28  0:41         ` Jingoo Han
  2 siblings, 2 replies; 17+ messages in thread
From: Bjorn Helgaas @ 2013-11-25 21:59 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: Greg Kroah-Hartman, Tejun Heo, Mika Westerberg,
	linux-kernel@vger.kernel.org, Linux PCI

On Sat, Nov 23, 2013 at 5:17 PM, Rafael J. Wysocki <rjw@rjwysocki.net> wrote:
> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>
> After commit bcdde7e221a8 (sysfs: make __sysfs_remove_dir() recursive)
> I'm seeing traces analogous to the one below in Thunderbolt testing:
>
> WARNING: CPU: 3 PID: 76 at /scratch/rafael/work/linux-pm/fs/sysfs/group.c:214 sysfs_remove_group+0x59/0xe0()
>  sysfs group ffffffff81c6c500 not found for kobject '0000:08'
>  Modules linked in: fuse hidp af_packet xt_tcpudp xt_pkttype xt_LOG xt_limit ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_raw ipt_REJECT iptable_raw xt_CT iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_broadcast nf_conntrack_ipv4 nf_defrag_ipv4 ip_tables xt_conntrack nf_conntrack rfcomm ip6table_filter bnep ip6_tables x_tables arc4 ath9k mac80211 x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul iTCO_wdt crc32c_intel iTCO_vendor_support ghash_clmulni_intel aesni_intel ablk_helper acer_wmi sparse_keymap ath9k_common ath9k_hw cryptd lrw gf128mul ath3k glue_helper aes_x86_64 btusb microcode ath pcspkr joydev uvcvideo serio_raw videobuf2_core i2c_i801 videodev snd_hda_codec_hdmi cfg80211 videobuf2_vmalloc tg3 videobuf2_memops sg ptp pps_core lpc_ich mfd_core snd_hda_codec_realtek bluetooth hid_logitech_dj rfkill snd_hda_intel snd_hda_codec shpchp battery ac wmi acpi_cpufreq edd snd_usb_audio snd_pcm snd_page_alloc snd_hwdep snd_usbmidi_lib
> snd_rawmidi snd_seq snd_timer snd_seq_device snd soundcore autofs4 xhci_hcd processor scsi_dh_hp_sw scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_dh
>  CPU: 3 PID: 76 Comm: kworker/u16:7 Not tainted 3.13.0-rc1+ #76
>  Hardware name: Acer Aspire S5-391/Venus    , BIOS V1.02 05/29/2012
>  Workqueue: kacpi_hotplug acpi_hotplug_work_fn
>   0000000000000009 ffff8801644b9ac8 ffffffff816b23bf 0000000000000007
>   ffff8801644b9b18 ffff8801644b9b08 ffffffff81046607 ffff88016925b800
>   0000000000000000 ffffffff81c6c500 ffff88016924f928 ffff88016924f800
>  Call Trace:
>   [<ffffffff816b23bf>] dump_stack+0x4e/0x71
>   [<ffffffff81046607>] warn_slowpath_common+0x87/0xb0
>   [<ffffffff810466d1>] warn_slowpath_fmt+0x41/0x50
>   [<ffffffff811e42ef>] ? sysfs_get_dirent_ns+0x6f/0x80
>   [<ffffffff811e5389>] sysfs_remove_group+0x59/0xe0
>   [<ffffffff8149f00b>] dpm_sysfs_remove+0x3b/0x50
>   [<ffffffff81495818>] device_del+0x58/0x1c0
>   [<ffffffff814959c8>] device_unregister+0x48/0x60
>   [<ffffffff813254fe>] pci_remove_bus+0x6e/0x80
>   [<ffffffff81325548>] pci_remove_bus_device+0x38/0x110
>   [<ffffffff8132555d>] pci_remove_bus_device+0x4d/0x110
>   [<ffffffff81325639>] pci_stop_and_remove_bus_device+0x19/0x20
>   [<ffffffff813418d0>] disable_slot+0x20/0xe0
>   [<ffffffff81341a38>] acpiphp_check_bridge+0xa8/0xd0
>   [<ffffffff813427ad>] hotplug_event+0x17d/0x220
>   [<ffffffff81342880>] hotplug_event_work+0x30/0x70
>   [<ffffffff8136d665>] acpi_hotplug_work_fn+0x18/0x24
>   [<ffffffff81061331>] process_one_work+0x261/0x450
>   [<ffffffff81061a7e>] worker_thread+0x21e/0x370
>   [<ffffffff81061860>] ? rescuer_thread+0x300/0x300
>   [<ffffffff81068342>] kthread+0xd2/0xe0
>   [<ffffffff81068270>] ? flush_kthread_worker+0x70/0x70
>   [<ffffffff816c19bc>] ret_from_fork+0x7c/0xb0
>   [<ffffffff81068270>] ? flush_kthread_worker+0x70/0x70
>
> (Mika Westerberg sees them too in his tests).
>
> Some investigation documented in kernel bug #65281 lead me to the
> conclusion that the source of the problem is the device_del() in
> pci_stop_dev() as it now causes the sysfs directory of the device
> to be removed recursively along with all of its subdirectories.
> That includes the sysfs directory of the device's subordinate
> bus (dev->subordinate) and its "power" group.
>
> Consequently, when pci_remove_bus() is called for dev->subordinate
> in pci_remove_bus_device(), it calls device_unregister(&bus->dev),
> but at this point the sysfs directory of bus->dev doesn't exist any
> more and its "power" group doesn't exist either.  Thus, when
> dpm_sysfs_remove() called from device_del() tries to remove that
> group, it triggers the above warning.
>
> That indicates a logical mistake in the design of
> pci_stop_and_remove_bus_device(), which causes bus device objects
> to be left behind their parents (bridge device objects) and can be
> fixed by moving the device_del() from pci_stop_dev() into
> pci_destroy_dev(), so pci_remove_bus() can be called for the
> device's subordinate bus before the device itself is unregistered
> from the hierarchy.  Still, the driver, if any, should be detached
> from the device in pci_stop_dev(), so use device_release_driver()
> directly from there.
>
> References: https://bugzilla.kernel.org/show_bug.cgi?id=65281#c6
> Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Applied to for-linus for v3.13.  Thanks a lot for all your work on this issue!

Bjorn

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH] PCI: Move device_del() from pci_stop_dev() to pci_destroy_dev()
  2013-11-25 21:59       ` Bjorn Helgaas
@ 2013-11-25 22:19         ` Rafael J. Wysocki
  2013-11-28  0:41         ` Jingoo Han
  1 sibling, 0 replies; 17+ messages in thread
From: Rafael J. Wysocki @ 2013-11-25 22:19 UTC (permalink / raw)
  To: Bjorn Helgaas
  Cc: Greg Kroah-Hartman, Tejun Heo, Mika Westerberg,
	linux-kernel@vger.kernel.org, Linux PCI

On Monday, November 25, 2013 02:59:44 PM Bjorn Helgaas wrote:
> On Sat, Nov 23, 2013 at 5:17 PM, Rafael J. Wysocki <rjw@rjwysocki.net> wrote:
> > From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> >
> > After commit bcdde7e221a8 (sysfs: make __sysfs_remove_dir() recursive)
> > I'm seeing traces analogous to the one below in Thunderbolt testing:

[...]

> > (Mika Westerberg sees them too in his tests).
> >
> > Some investigation documented in kernel bug #65281 lead me to the
> > conclusion that the source of the problem is the device_del() in
> > pci_stop_dev() as it now causes the sysfs directory of the device
> > to be removed recursively along with all of its subdirectories.
> > That includes the sysfs directory of the device's subordinate
> > bus (dev->subordinate) and its "power" group.
> >
> > Consequently, when pci_remove_bus() is called for dev->subordinate
> > in pci_remove_bus_device(), it calls device_unregister(&bus->dev),
> > but at this point the sysfs directory of bus->dev doesn't exist any
> > more and its "power" group doesn't exist either.  Thus, when
> > dpm_sysfs_remove() called from device_del() tries to remove that
> > group, it triggers the above warning.
> >
> > That indicates a logical mistake in the design of
> > pci_stop_and_remove_bus_device(), which causes bus device objects
> > to be left behind their parents (bridge device objects) and can be
> > fixed by moving the device_del() from pci_stop_dev() into
> > pci_destroy_dev(), so pci_remove_bus() can be called for the
> > device's subordinate bus before the device itself is unregistered
> > from the hierarchy.  Still, the driver, if any, should be detached
> > from the device in pci_stop_dev(), so use device_release_driver()
> > directly from there.
> >
> > References: https://bugzilla.kernel.org/show_bug.cgi?id=65281#c6
> > Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
> > Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> 
> Applied to for-linus for v3.13.  Thanks a lot for all your work on this issue!

Thanks, and no problem! :-)

Rafael


^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH] PCI: Move device_del() from pci_stop_dev() to pci_destroy_dev()
  2013-11-25 21:59       ` Bjorn Helgaas
  2013-11-25 22:19         ` Rafael J. Wysocki
@ 2013-11-28  0:41         ` Jingoo Han
  1 sibling, 0 replies; 17+ messages in thread
From: Jingoo Han @ 2013-11-28  0:41 UTC (permalink / raw)
  To: 'Rafael J. Wysocki'
  Cc: 'Bjorn Helgaas', 'Greg Kroah-Hartman',
	'Tejun Heo', 'Mika Westerberg', linux-kernel,
	'Linux PCI', 'Jingoo Han'

On Tuesday, November 26, 2013 7:00 AM, Bjorn Helgaas wrote:
> On Sat, Nov 23, 2013 at 5:17 PM, Rafael J. Wysocki <rjw@rjwysocki.net> wrote:
> > From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> >
> > After commit bcdde7e221a8 (sysfs: make __sysfs_remove_dir() recursive)
> > I'm seeing traces analogous to the one below in Thunderbolt testing:
> >
> > WARNING: CPU: 3 PID: 76 at /scratch/rafael/work/linux-pm/fs/sysfs/group.c:214
> sysfs_remove_group+0x59/0xe0()
> >  sysfs group ffffffff81c6c500 not found for kobject '0000:08'
> >  Modules linked in: fuse hidp af_packet xt_tcpudp xt_pkttype xt_LOG xt_limit ip6t_REJECT
> nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_raw ipt_REJECT iptable_raw xt_CT iptable_filter
> ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_broadcast nf_conntrack_ipv4 nf_defrag_ipv4
> ip_tables xt_conntrack nf_conntrack rfcomm ip6table_filter bnep ip6_tables x_tables arc4 ath9k
> mac80211 x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul iTCO_wdt
> crc32c_intel iTCO_vendor_support ghash_clmulni_intel aesni_intel ablk_helper acer_wmi sparse_keymap
> ath9k_common ath9k_hw cryptd lrw gf128mul ath3k glue_helper aes_x86_64 btusb microcode ath pcspkr
> joydev uvcvideo serio_raw videobuf2_core i2c_i801 videodev snd_hda_codec_hdmi cfg80211
> videobuf2_vmalloc tg3 videobuf2_memops sg ptp pps_core lpc_ich mfd_core snd_hda_codec_realtek
> bluetooth hid_logitech_dj rfkill snd_hda_intel snd_hda_codec shpchp battery ac wmi acpi_cpufreq edd
> snd_usb_audio snd_pcm snd_page_alloc snd_hwdep
>  snd_usbmidi_lib
> > snd_rawmidi snd_seq snd_timer snd_seq_device snd soundcore autofs4 xhci_hcd processor scsi_dh_hp_sw
> scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_dh
> >  CPU: 3 PID: 76 Comm: kworker/u16:7 Not tainted 3.13.0-rc1+ #76
> >  Hardware name: Acer Aspire S5-391/Venus    , BIOS V1.02 05/29/2012
> >  Workqueue: kacpi_hotplug acpi_hotplug_work_fn
> >   0000000000000009 ffff8801644b9ac8 ffffffff816b23bf 0000000000000007
> >   ffff8801644b9b18 ffff8801644b9b08 ffffffff81046607 ffff88016925b800
> >   0000000000000000 ffffffff81c6c500 ffff88016924f928 ffff88016924f800
> >  Call Trace:
> >   [<ffffffff816b23bf>] dump_stack+0x4e/0x71
> >   [<ffffffff81046607>] warn_slowpath_common+0x87/0xb0
> >   [<ffffffff810466d1>] warn_slowpath_fmt+0x41/0x50
> >   [<ffffffff811e42ef>] ? sysfs_get_dirent_ns+0x6f/0x80
> >   [<ffffffff811e5389>] sysfs_remove_group+0x59/0xe0
> >   [<ffffffff8149f00b>] dpm_sysfs_remove+0x3b/0x50
> >   [<ffffffff81495818>] device_del+0x58/0x1c0
> >   [<ffffffff814959c8>] device_unregister+0x48/0x60
> >   [<ffffffff813254fe>] pci_remove_bus+0x6e/0x80
> >   [<ffffffff81325548>] pci_remove_bus_device+0x38/0x110
> >   [<ffffffff8132555d>] pci_remove_bus_device+0x4d/0x110
> >   [<ffffffff81325639>] pci_stop_and_remove_bus_device+0x19/0x20
> >   [<ffffffff813418d0>] disable_slot+0x20/0xe0
> >   [<ffffffff81341a38>] acpiphp_check_bridge+0xa8/0xd0
> >   [<ffffffff813427ad>] hotplug_event+0x17d/0x220
> >   [<ffffffff81342880>] hotplug_event_work+0x30/0x70
> >   [<ffffffff8136d665>] acpi_hotplug_work_fn+0x18/0x24
> >   [<ffffffff81061331>] process_one_work+0x261/0x450
> >   [<ffffffff81061a7e>] worker_thread+0x21e/0x370
> >   [<ffffffff81061860>] ? rescuer_thread+0x300/0x300
> >   [<ffffffff81068342>] kthread+0xd2/0xe0
> >   [<ffffffff81068270>] ? flush_kthread_worker+0x70/0x70
> >   [<ffffffff816c19bc>] ret_from_fork+0x7c/0xb0
> >   [<ffffffff81068270>] ? flush_kthread_worker+0x70/0x70
> >
> > (Mika Westerberg sees them too in his tests).
> >
> > Some investigation documented in kernel bug #65281 lead me to the
> > conclusion that the source of the problem is the device_del() in
> > pci_stop_dev() as it now causes the sysfs directory of the device
> > to be removed recursively along with all of its subdirectories.
> > That includes the sysfs directory of the device's subordinate
> > bus (dev->subordinate) and its "power" group.
> >
> > Consequently, when pci_remove_bus() is called for dev->subordinate
> > in pci_remove_bus_device(), it calls device_unregister(&bus->dev),
> > but at this point the sysfs directory of bus->dev doesn't exist any
> > more and its "power" group doesn't exist either.  Thus, when
> > dpm_sysfs_remove() called from device_del() tries to remove that
> > group, it triggers the above warning.
> >
> > That indicates a logical mistake in the design of
> > pci_stop_and_remove_bus_device(), which causes bus device objects
> > to be left behind their parents (bridge device objects) and can be
> > fixed by moving the device_del() from pci_stop_dev() into
> > pci_destroy_dev(), so pci_remove_bus() can be called for the
> > device's subordinate bus before the device itself is unregistered
> > from the hierarchy.  Still, the driver, if any, should be detached
> > from the device in pci_stop_dev(), so use device_release_driver()
> > directly from there.
> >
> > References: https://bugzilla.kernel.org/show_bug.cgi?id=65281#c6
> > Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
> > Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> 
> Applied to for-linus for v3.13.  Thanks a lot for all your work on this issue!

Hi Rafael J. Wysocki,

A week ago, I found this warning when removing PCI devices.
However, I was not able to fix this warning.

Today, I tested your patch on Samsung Exynos platform
with PCI-LAN card. I checked that this warning is resolved.
I really appreciate you patch! :-)
Thank you.

Best regards,
Jingoo Han


^ permalink raw reply	[flat|nested] 17+ messages in thread

[parent not found: <3805095.rqdZNnA0Ng@vostro.rjw.lan>]

[parent not found: <20131125101154.GS2281@intel.com>]

* [PATCH] ATA: Fix port removal ordering
       [not found]   ` <20131125101154.GS2281@intel.com>
@ 2013-11-25 12:19     ` Rafael J. Wysocki
  2013-11-27  1:58       ` Rafael J. Wysocki
                         ` (2 more replies)
  0 siblings, 3 replies; 17+ messages in thread
From: Rafael J. Wysocki @ 2013-11-25 12:19 UTC (permalink / raw)
  To: Tejun Heo
  Cc: Mika Westerberg, Greg Kroah-Hartman, Bjorn Helgaas,
	linux-kernel@vger.kernel.org, James E.J. Bottomley, linux-ide,
	Linux PCI

From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

After commit bcdde7e221a8 (sysfs: make __sysfs_remove_dir() recursive)
Mika Westerberg sees traces analogous to the one below in Thunderbolt
hot-remove testing:

 WARNING: CPU: 0 PID: 4 at fs/sysfs/group.c:214 sysfs_remove_group+0xc6/0xd0()
 sysfs group ffffffff81c6f1e0 not found for kobject 'host7'
 Modules linked in:
 CPU: 0 PID: 4 Comm: kworker/0:0 Not tainted 3.12.0+ #13
 Hardware name:                  /D33217CK, BIOS GKPPT10H.86A.0042.2013.0422.1439 04/22/2013
 Workqueue: kacpi_hotplug acpi_hotplug_work_fn
  0000000000000009 ffff8801002459b0 ffffffff817daab1 ffff8801002459f8
  ffff8801002459e8 ffffffff810436b8 0000000000000000 ffffffff81c6f1e0
  ffff88006d440358 ffff88006d440188 ffff88006e8b4c28 ffff880100245a48
 Call Trace:
  [<ffffffff817daab1>] dump_stack+0x45/0x56
  [<ffffffff810436b8>] warn_slowpath_common+0x78/0xa0
  [<ffffffff81043727>] warn_slowpath_fmt+0x47/0x50
  [<ffffffff811ad319>] ? sysfs_get_dirent_ns+0x49/0x70
  [<ffffffff811ae526>] sysfs_remove_group+0xc6/0xd0
  [<ffffffff81432f7e>] dpm_sysfs_remove+0x3e/0x50
  [<ffffffff8142a0d0>] device_del+0x40/0x1b0
  [<ffffffff8142a24d>] device_unregister+0xd/0x20
  [<ffffffff8144131a>] scsi_remove_host+0xba/0x110
  [<ffffffff8145f526>] ata_host_detach+0xc6/0x100
  [<ffffffff8145f578>] ata_pci_remove_one+0x18/0x20
  [<ffffffff812e8f48>] pci_device_remove+0x28/0x60
  [<ffffffff8142d854>] __device_release_driver+0x64/0xd0
  [<ffffffff8142d8de>] device_release_driver+0x1e/0x30
  [<ffffffff8142d257>] bus_remove_device+0xf7/0x140
  [<ffffffff8142a1b1>] device_del+0x121/0x1b0
  [<ffffffff812e43d4>] pci_stop_bus_device+0x94/0xa0
  [<ffffffff812e437b>] pci_stop_bus_device+0x3b/0xa0
  [<ffffffff812e437b>] pci_stop_bus_device+0x3b/0xa0
  [<ffffffff812e44dd>] pci_stop_and_remove_bus_device+0xd/0x20
  [<ffffffff812fc743>] trim_stale_devices+0x73/0xe0
  [<ffffffff812fc78b>] trim_stale_devices+0xbb/0xe0
  [<ffffffff812fc78b>] trim_stale_devices+0xbb/0xe0
  [<ffffffff812fcb6e>] acpiphp_check_bridge+0x7e/0xd0
  [<ffffffff812fd90d>] hotplug_event+0xcd/0x160
  [<ffffffff812fd9c5>] hotplug_event_work+0x25/0x60
  [<ffffffff81316749>] acpi_hotplug_work_fn+0x17/0x22
  [<ffffffff8105cf3a>] process_one_work+0x17a/0x430
  [<ffffffff8105db29>] worker_thread+0x119/0x390
  [<ffffffff8105da10>] ? manage_workers.isra.25+0x2a0/0x2a0
  [<ffffffff81063a5d>] kthread+0xcd/0xf0
  [<ffffffff81063990>] ? kthread_create_on_node+0x180/0x180
  [<ffffffff817eb33c>] ret_from_fork+0x7c/0xb0
  [<ffffffff81063990>] ? kthread_create_on_node+0x180/0x180

The source of this problem is that SCSI hosts are removed from
ATA ports after calling ata_tport_delete() which removes the
port's sysfs directory, among other things.  Now, after commit
bcdde7e221a8, the sysfs directory is removed along with all of
its subdirectories that include the SCSI host's sysfs directory
and its subdirectories at this point.  Consequently, when
device_del() is finally called for any child device of the SCSI
host and tries to remove its "power" group (which is already
gone then), it triggers the above warning.

To make the warnings go away, change the removal ordering in
ata_port_detach() so that the SCSI host is removed from the
port before ata_tport_delete() is called.

References: https://bugzilla.kernel.org/show_bug.cgi?id=65281
Reported-and-tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---

Hi,

This along with https://patchwork.kernel.org/patch/3226081/ makes
all of the warnings observed by Mika go away without the patch at
https://patchwork.kernel.org/patch/3201841/ applied.

Thanks,
Rafael

---
 drivers/ata/libata-core.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

Index: linux-pm/drivers/ata/libata-core.c
===================================================================
--- linux-pm.orig/drivers/ata/libata-core.c
+++ linux-pm/drivers/ata/libata-core.c
@@ -6304,10 +6304,9 @@ static void ata_port_detach(struct ata_p
 		for (i = 0; i < SATA_PMP_MAX_PORTS; i++)
 			ata_tlink_delete(&ap->pmp_link[i]);
 	}
-	ata_tport_delete(ap);
-
 	/* remove the associated SCSI host */
 	scsi_remove_host(ap->scsi_host);
+	ata_tport_delete(ap);
 }
 
 /**


^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH] ATA: Fix port removal ordering
  2013-11-25 12:19     ` [PATCH] ATA: Fix port removal ordering Rafael J. Wysocki
@ 2013-11-27  1:58       ` Rafael J. Wysocki
  2013-11-27  4:34       ` Jingoo Han
  2013-11-27 18:56       ` Tejun Heo
  2 siblings, 0 replies; 17+ messages in thread
From: Rafael J. Wysocki @ 2013-11-27  1:58 UTC (permalink / raw)
  To: Tejun Heo
  Cc: Mika Westerberg, Greg Kroah-Hartman, Bjorn Helgaas,
	linux-kernel@vger.kernel.org, James E.J. Bottomley, linux-ide,
	Linux PCI, Gwendal Grignou

On Monday, November 25, 2013 01:19:01 PM Rafael J. Wysocki wrote:
> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> 
> After commit bcdde7e221a8 (sysfs: make __sysfs_remove_dir() recursive)
> Mika Westerberg sees traces analogous to the one below in Thunderbolt
> hot-remove testing:
> 
>  WARNING: CPU: 0 PID: 4 at fs/sysfs/group.c:214 sysfs_remove_group+0xc6/0xd0()
>  sysfs group ffffffff81c6f1e0 not found for kobject 'host7'
>  Modules linked in:
>  CPU: 0 PID: 4 Comm: kworker/0:0 Not tainted 3.12.0+ #13
>  Hardware name:                  /D33217CK, BIOS GKPPT10H.86A.0042.2013.0422.1439 04/22/2013
>  Workqueue: kacpi_hotplug acpi_hotplug_work_fn
>   0000000000000009 ffff8801002459b0 ffffffff817daab1 ffff8801002459f8
>   ffff8801002459e8 ffffffff810436b8 0000000000000000 ffffffff81c6f1e0
>   ffff88006d440358 ffff88006d440188 ffff88006e8b4c28 ffff880100245a48
>  Call Trace:
>   [<ffffffff817daab1>] dump_stack+0x45/0x56
>   [<ffffffff810436b8>] warn_slowpath_common+0x78/0xa0
>   [<ffffffff81043727>] warn_slowpath_fmt+0x47/0x50
>   [<ffffffff811ad319>] ? sysfs_get_dirent_ns+0x49/0x70
>   [<ffffffff811ae526>] sysfs_remove_group+0xc6/0xd0
>   [<ffffffff81432f7e>] dpm_sysfs_remove+0x3e/0x50
>   [<ffffffff8142a0d0>] device_del+0x40/0x1b0
>   [<ffffffff8142a24d>] device_unregister+0xd/0x20
>   [<ffffffff8144131a>] scsi_remove_host+0xba/0x110
>   [<ffffffff8145f526>] ata_host_detach+0xc6/0x100
>   [<ffffffff8145f578>] ata_pci_remove_one+0x18/0x20
>   [<ffffffff812e8f48>] pci_device_remove+0x28/0x60
>   [<ffffffff8142d854>] __device_release_driver+0x64/0xd0
>   [<ffffffff8142d8de>] device_release_driver+0x1e/0x30
>   [<ffffffff8142d257>] bus_remove_device+0xf7/0x140
>   [<ffffffff8142a1b1>] device_del+0x121/0x1b0
>   [<ffffffff812e43d4>] pci_stop_bus_device+0x94/0xa0
>   [<ffffffff812e437b>] pci_stop_bus_device+0x3b/0xa0
>   [<ffffffff812e437b>] pci_stop_bus_device+0x3b/0xa0
>   [<ffffffff812e44dd>] pci_stop_and_remove_bus_device+0xd/0x20
>   [<ffffffff812fc743>] trim_stale_devices+0x73/0xe0
>   [<ffffffff812fc78b>] trim_stale_devices+0xbb/0xe0
>   [<ffffffff812fc78b>] trim_stale_devices+0xbb/0xe0
>   [<ffffffff812fcb6e>] acpiphp_check_bridge+0x7e/0xd0
>   [<ffffffff812fd90d>] hotplug_event+0xcd/0x160
>   [<ffffffff812fd9c5>] hotplug_event_work+0x25/0x60
>   [<ffffffff81316749>] acpi_hotplug_work_fn+0x17/0x22
>   [<ffffffff8105cf3a>] process_one_work+0x17a/0x430
>   [<ffffffff8105db29>] worker_thread+0x119/0x390
>   [<ffffffff8105da10>] ? manage_workers.isra.25+0x2a0/0x2a0
>   [<ffffffff81063a5d>] kthread+0xcd/0xf0
>   [<ffffffff81063990>] ? kthread_create_on_node+0x180/0x180
>   [<ffffffff817eb33c>] ret_from_fork+0x7c/0xb0
>   [<ffffffff81063990>] ? kthread_create_on_node+0x180/0x180
> 
> The source of this problem is that SCSI hosts are removed from
> ATA ports after calling ata_tport_delete() which removes the
> port's sysfs directory, among other things.  Now, after commit
> bcdde7e221a8, the sysfs directory is removed along with all of
> its subdirectories that include the SCSI host's sysfs directory
> and its subdirectories at this point.  Consequently, when
> device_del() is finally called for any child device of the SCSI
> host and tries to remove its "power" group (which is already
> gone then), it triggers the above warning.
> 
> To make the warnings go away, change the removal ordering in
> ata_port_detach() so that the SCSI host is removed from the
> port before ata_tport_delete() is called.
> 
> References: https://bugzilla.kernel.org/show_bug.cgi?id=65281
> Reported-and-tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> ---
> 
> Hi,
> 
> This along with https://patchwork.kernel.org/patch/3226081/ makes
> all of the warnings observed by Mika go away without the patch at
> https://patchwork.kernel.org/patch/3201841/ applied.

Any news here?

Gwendal has agreed with this patch. :-)

Thanks,
Rafael


> ---
>  drivers/ata/libata-core.c |    3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)
> 
> Index: linux-pm/drivers/ata/libata-core.c
> ===================================================================
> --- linux-pm.orig/drivers/ata/libata-core.c
> +++ linux-pm/drivers/ata/libata-core.c
> @@ -6304,10 +6304,9 @@ static void ata_port_detach(struct ata_p
>  		for (i = 0; i < SATA_PMP_MAX_PORTS; i++)
>  			ata_tlink_delete(&ap->pmp_link[i]);
>  	}
> -	ata_tport_delete(ap);
> -
>  	/* remove the associated SCSI host */
>  	scsi_remove_host(ap->scsi_host);
> +	ata_tport_delete(ap);
>  }
>  
>  /**
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
-- 
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH] ATA: Fix port removal ordering
  2013-11-25 12:19     ` [PATCH] ATA: Fix port removal ordering Rafael J. Wysocki
  2013-11-27  1:58       ` Rafael J. Wysocki
@ 2013-11-27  4:34       ` Jingoo Han
  2013-11-27 18:56       ` Tejun Heo
  2 siblings, 0 replies; 17+ messages in thread
From: Jingoo Han @ 2013-11-27  4:34 UTC (permalink / raw)
  To: 'Rafael J. Wysocki', 'Tejun Heo'
  Cc: 'Mika Westerberg', 'Greg Kroah-Hartman',
	'Bjorn Helgaas', linux-kernel,
	'James E.J. Bottomley', linux-ide, 'Linux PCI',
	'Jingoo Han'

On Monday, November 25, 2013 9:19 PM, Rafael J. Wysocki wrote:
> 
> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> 
> After commit bcdde7e221a8 (sysfs: make __sysfs_remove_dir() recursive)
> Mika Westerberg sees traces analogous to the one below in Thunderbolt
> hot-remove testing:
> 
>  WARNING: CPU: 0 PID: 4 at fs/sysfs/group.c:214 sysfs_remove_group+0xc6/0xd0()
>  sysfs group ffffffff81c6f1e0 not found for kobject 'host7'
>  Modules linked in:
>  CPU: 0 PID: 4 Comm: kworker/0:0 Not tainted 3.12.0+ #13
>  Hardware name:                  /D33217CK, BIOS GKPPT10H.86A.0042.2013.0422.1439 04/22/2013
>  Workqueue: kacpi_hotplug acpi_hotplug_work_fn
>   0000000000000009 ffff8801002459b0 ffffffff817daab1 ffff8801002459f8
>   ffff8801002459e8 ffffffff810436b8 0000000000000000 ffffffff81c6f1e0
>   ffff88006d440358 ffff88006d440188 ffff88006e8b4c28 ffff880100245a48
>  Call Trace:
>   [<ffffffff817daab1>] dump_stack+0x45/0x56
>   [<ffffffff810436b8>] warn_slowpath_common+0x78/0xa0
>   [<ffffffff81043727>] warn_slowpath_fmt+0x47/0x50
>   [<ffffffff811ad319>] ? sysfs_get_dirent_ns+0x49/0x70
>   [<ffffffff811ae526>] sysfs_remove_group+0xc6/0xd0
>   [<ffffffff81432f7e>] dpm_sysfs_remove+0x3e/0x50
>   [<ffffffff8142a0d0>] device_del+0x40/0x1b0
>   [<ffffffff8142a24d>] device_unregister+0xd/0x20
>   [<ffffffff8144131a>] scsi_remove_host+0xba/0x110
>   [<ffffffff8145f526>] ata_host_detach+0xc6/0x100
>   [<ffffffff8145f578>] ata_pci_remove_one+0x18/0x20
>   [<ffffffff812e8f48>] pci_device_remove+0x28/0x60
>   [<ffffffff8142d854>] __device_release_driver+0x64/0xd0
>   [<ffffffff8142d8de>] device_release_driver+0x1e/0x30
>   [<ffffffff8142d257>] bus_remove_device+0xf7/0x140
>   [<ffffffff8142a1b1>] device_del+0x121/0x1b0
>   [<ffffffff812e43d4>] pci_stop_bus_device+0x94/0xa0
>   [<ffffffff812e437b>] pci_stop_bus_device+0x3b/0xa0
>   [<ffffffff812e437b>] pci_stop_bus_device+0x3b/0xa0
>   [<ffffffff812e44dd>] pci_stop_and_remove_bus_device+0xd/0x20
>   [<ffffffff812fc743>] trim_stale_devices+0x73/0xe0
>   [<ffffffff812fc78b>] trim_stale_devices+0xbb/0xe0
>   [<ffffffff812fc78b>] trim_stale_devices+0xbb/0xe0
>   [<ffffffff812fcb6e>] acpiphp_check_bridge+0x7e/0xd0
>   [<ffffffff812fd90d>] hotplug_event+0xcd/0x160
>   [<ffffffff812fd9c5>] hotplug_event_work+0x25/0x60
>   [<ffffffff81316749>] acpi_hotplug_work_fn+0x17/0x22
>   [<ffffffff8105cf3a>] process_one_work+0x17a/0x430
>   [<ffffffff8105db29>] worker_thread+0x119/0x390
>   [<ffffffff8105da10>] ? manage_workers.isra.25+0x2a0/0x2a0
>   [<ffffffff81063a5d>] kthread+0xcd/0xf0
>   [<ffffffff81063990>] ? kthread_create_on_node+0x180/0x180
>   [<ffffffff817eb33c>] ret_from_fork+0x7c/0xb0
>   [<ffffffff81063990>] ? kthread_create_on_node+0x180/0x180
> 
> The source of this problem is that SCSI hosts are removed from
> ATA ports after calling ata_tport_delete() which removes the
> port's sysfs directory, among other things.  Now, after commit
> bcdde7e221a8, the sysfs directory is removed along with all of
> its subdirectories that include the SCSI host's sysfs directory
> and its subdirectories at this point.  Consequently, when
> device_del() is finally called for any child device of the SCSI
> host and tries to remove its "power" group (which is already
> gone then), it triggers the above warning.
> 
> To make the warnings go away, change the removal ordering in
> ata_port_detach() so that the SCSI host is removed from the
> port before ata_tport_delete() is called.
> 
> References: https://bugzilla.kernel.org/show_bug.cgi?id=65281
> Reported-and-tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Tested-by: Jingoo Han <jg1.han@samsung.com>

I tested this patch on Exynos platform with PCI-SATA card.
I checked that the kernel panic is resolved.
Thank you.

Best regards,
Jingoo Han

> ---
> 
> Hi,
> 
> This along with https://patchwork.kernel.org/patch/3226081/ makes
> all of the warnings observed by Mika go away without the patch at
> https://patchwork.kernel.org/patch/3201841/ applied.
> 
> Thanks,
> Rafael
> 
> ---
>  drivers/ata/libata-core.c |    3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)
> 
> Index: linux-pm/drivers/ata/libata-core.c
> ===================================================================
> --- linux-pm.orig/drivers/ata/libata-core.c
> +++ linux-pm/drivers/ata/libata-core.c
> @@ -6304,10 +6304,9 @@ static void ata_port_detach(struct ata_p
>  		for (i = 0; i < SATA_PMP_MAX_PORTS; i++)
>  			ata_tlink_delete(&ap->pmp_link[i]);
>  	}
> -	ata_tport_delete(ap);
> -
>  	/* remove the associated SCSI host */
>  	scsi_remove_host(ap->scsi_host);
> +	ata_tport_delete(ap);
>  }
> 
>  /**
> 
> --


^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH] ATA: Fix port removal ordering
  2013-11-25 12:19     ` [PATCH] ATA: Fix port removal ordering Rafael J. Wysocki
  2013-11-27  1:58       ` Rafael J. Wysocki
  2013-11-27  4:34       ` Jingoo Han
@ 2013-11-27 18:56       ` Tejun Heo
  2 siblings, 0 replies; 17+ messages in thread
From: Tejun Heo @ 2013-11-27 18:56 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: Mika Westerberg, Greg Kroah-Hartman, Bjorn Helgaas,
	linux-kernel@vger.kernel.org, James E.J. Bottomley, linux-ide,
	Linux PCI

On Mon, Nov 25, 2013 at 01:19:01PM +0100, Rafael J. Wysocki wrote:
> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> 
> After commit bcdde7e221a8 (sysfs: make __sysfs_remove_dir() recursive)
> Mika Westerberg sees traces analogous to the one below in Thunderbolt
> hot-remove testing:
...
> The source of this problem is that SCSI hosts are removed from
> ATA ports after calling ata_tport_delete() which removes the
> port's sysfs directory, among other things.  Now, after commit
> bcdde7e221a8, the sysfs directory is removed along with all of
> its subdirectories that include the SCSI host's sysfs directory
> and its subdirectories at this point.  Consequently, when
> device_del() is finally called for any child device of the SCSI
> host and tries to remove its "power" group (which is already
> gone then), it triggers the above warning.
> 
> To make the warnings go away, change the removal ordering in
> ata_port_detach() so that the SCSI host is removed from the
> port before ata_tport_delete() is called.
> 
> References: https://bugzilla.kernel.org/show_bug.cgi?id=65281
> Reported-and-tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Applied to libata/for-3.13-fixes.

Thanks!

-- 
tejun

^ permalink raw reply	[flat|nested] 17+ messages in thread

end of thread, other threads:[~2013-11-28  0:41 UTC | newest]

Thread overview: 17+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
     [not found] <1384866598-19716-1-git-send-email-mika.westerberg@linux.intel.com>
     [not found] ` <4668705.kv8hgxjqAc@vostro.rjw.lan>
     [not found]   ` <20131123230701.GA6183@kroah.com>
2013-11-24  0:17     ` [PATCH] PCI: Move device_del() from pci_stop_dev() to pci_destroy_dev() Rafael J. Wysocki
2013-11-25  4:54       ` Yinghai Lu
2013-11-25  4:58         ` Yinghai Lu
2013-11-25 11:23           ` Rafael J. Wysocki
2013-11-25 19:48             ` Yinghai Lu
2013-11-25 11:22         ` Rafael J. Wysocki
2013-11-25 19:45           ` Yinghai Lu
2013-11-25 20:57             ` Rafael J. Wysocki
2013-11-25  9:47       ` Mika Westerberg
2013-11-25 11:24         ` Rafael J. Wysocki
2013-11-25 21:59       ` Bjorn Helgaas
2013-11-25 22:19         ` Rafael J. Wysocki
2013-11-28  0:41         ` Jingoo Han
     [not found] ` <3805095.rqdZNnA0Ng@vostro.rjw.lan>
     [not found]   ` <20131125101154.GS2281@intel.com>
2013-11-25 12:19     ` [PATCH] ATA: Fix port removal ordering Rafael J. Wysocki
2013-11-27  1:58       ` Rafael J. Wysocki
2013-11-27  4:34       ` Jingoo Han
2013-11-27 18:56       ` Tejun Heo

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).