RE: [PATCH 05/16] ntb: ensure ntb_mw_get_align is only called when the link is up

["Allen Hubbe" <Allen.Hubbe@dell.com>]

From: Logan Gunthorpe
> With switchtec hardware it's impossible to get the alignment parameters
> for a peer's memory window until the peer's driver has configured it's
> windows. Strictly speaking, the link doesn't have to be up for this,
> but the link being up is the only way the client can tell that
> the otherside has been configured.
> 
> This patch converts ntb_transport and ntb_perf to use this function after
> the link goes up. This simplifies these clients slightly because they
> no longer have to store the alignment parameters. It also tweaks
> ntb_tool so that peer_mw_trans will print zero if it is run before
> the link goes up.
> 
> Signed-off-by: Logan Gunthorpe <logang@deltatee.com>

Acked-by: Allen Hubbe <Allen.Hubbe@dell.com>

> ---
>  drivers/ntb/ntb_transport.c | 20 ++++++++++----------
>  drivers/ntb/test/ntb_perf.c | 18 +++++++++---------
>  drivers/ntb/test/ntb_tool.c |  6 +++---
>  3 files changed, 22 insertions(+), 22 deletions(-)
> 
> diff --git a/drivers/ntb/ntb_transport.c b/drivers/ntb/ntb_transport.c
> index b29558ddfe95..7ed745aaa213 100644
> --- a/drivers/ntb/ntb_transport.c
> +++ b/drivers/ntb/ntb_transport.c
> @@ -191,8 +191,6 @@ struct ntb_transport_qp {
>  struct ntb_transport_mw {
>  	phys_addr_t phys_addr;
>  	resource_size_t phys_size;
> -	resource_size_t xlat_align;
> -	resource_size_t xlat_align_size;
>  	void __iomem *vbase;
>  	size_t xlat_size;
>  	size_t buff_size;
> @@ -687,13 +685,20 @@ static int ntb_set_mw(struct ntb_transport_ctx *nt, int num_mw,
>  	struct ntb_transport_mw *mw = &nt->mw_vec[num_mw];
>  	struct pci_dev *pdev = nt->ndev->pdev;
>  	size_t xlat_size, buff_size;
> +	resource_size_t xlat_align;
> +	resource_size_t xlat_align_size;
>  	int rc;
> 
>  	if (!size)
>  		return -EINVAL;
> 
> -	xlat_size = round_up(size, mw->xlat_align_size);
> -	buff_size = round_up(size, mw->xlat_align);
> +	rc = ntb_mw_get_align(nt->ndev, PIDX, num_mw, &xlat_align,
> +			      &xlat_align_size, NULL);
> +	if (rc)
> +		return rc;
> +
> +	xlat_size = round_up(size, xlat_align_size);
> +	buff_size = round_up(size, xlat_align);
> 
>  	/* No need to re-setup */
>  	if (mw->xlat_size == xlat_size)
> @@ -722,7 +727,7 @@ static int ntb_set_mw(struct ntb_transport_ctx *nt, int num_mw,
>  	 * is a requirement of the hardware. It is recommended to setup CMA
>  	 * for BAR sizes equal or greater than 4MB.
>  	 */
> -	if (!IS_ALIGNED(mw->dma_addr, mw->xlat_align)) {
> +	if (!IS_ALIGNED(mw->dma_addr, xlat_align)) {
>  		dev_err(&pdev->dev, "DMA memory %pad is not aligned\n",
>  			&mw->dma_addr);
>  		ntb_free_mw(nt, num_mw);
> @@ -1106,11 +1111,6 @@ static int ntb_transport_probe(struct ntb_client *self, struct ntb_dev *ndev)
>  	for (i = 0; i < mw_count; i++) {
>  		mw = &nt->mw_vec[i];
> 
> -		rc = ntb_mw_get_align(ndev, PIDX, i, &mw->xlat_align,
> -				      &mw->xlat_align_size, NULL);
> -		if (rc)
> -			goto err1;
> -
>  		rc = ntb_peer_mw_get_addr(ndev, i, &mw->phys_addr,
>  					  &mw->phys_size);
>  		if (rc)
> diff --git a/drivers/ntb/test/ntb_perf.c b/drivers/ntb/test/ntb_perf.c
> index 759f772fa00c..427112cf101a 100644
> --- a/drivers/ntb/test/ntb_perf.c
> +++ b/drivers/ntb/test/ntb_perf.c
> @@ -108,8 +108,6 @@ MODULE_PARM_DESC(on_node, "Run threads only on NTB device node (default: true)")
>  struct perf_mw {
>  	phys_addr_t	phys_addr;
>  	resource_size_t	phys_size;
> -	resource_size_t	xlat_align;
> -	resource_size_t	xlat_align_size;
>  	void __iomem	*vbase;
>  	size_t		xlat_size;
>  	size_t		buf_size;
> @@ -472,13 +470,20 @@ static int perf_set_mw(struct perf_ctx *perf, resource_size_t size)
>  {
>  	struct perf_mw *mw = &perf->mw;
>  	size_t xlat_size, buf_size;
> +	resource_size_t	xlat_align;
> +	resource_size_t	xlat_align_size;
>  	int rc;
> 
>  	if (!size)
>  		return -EINVAL;
> 
> -	xlat_size = round_up(size, mw->xlat_align_size);
> -	buf_size = round_up(size, mw->xlat_align);
> +	rc = ntb_mw_get_align(perf->ntb, PIDX, 0, &xlat_align,
> +			      &xlat_align_size, NULL);
> +	if (rc)
> +		return rc;
> +
> +	xlat_size = round_up(size, xlat_align_size);
> +	buf_size = round_up(size, xlat_align);
> 
>  	if (mw->xlat_size == xlat_size)
>  		return 0;
> @@ -567,11 +572,6 @@ static int perf_setup_mw(struct ntb_dev *ntb, struct perf_ctx *perf)
> 
>  	mw = &perf->mw;
> 
> -	rc = ntb_mw_get_align(ntb, PIDX, 0, &mw->xlat_align,
> -			      &mw->xlat_align_size, NULL);
> -	if (rc)
> -		return rc;
> -
>  	rc = ntb_peer_mw_get_addr(ntb, 0, &mw->phys_addr, &mw->phys_size);
>  	if (rc)
>  		return rc;
> diff --git a/drivers/ntb/test/ntb_tool.c b/drivers/ntb/test/ntb_tool.c
> index a69815c45ce6..91526a986caa 100644
> --- a/drivers/ntb/test/ntb_tool.c
> +++ b/drivers/ntb/test/ntb_tool.c
> @@ -753,9 +753,9 @@ static ssize_t tool_peer_mw_trans_read(struct file *filep,
> 
>  	phys_addr_t base;
>  	resource_size_t mw_size;
> -	resource_size_t align_addr;
> -	resource_size_t align_size;
> -	resource_size_t max_size;
> +	resource_size_t align_addr = 0;
> +	resource_size_t align_size = 0;
> +	resource_size_t max_size = 0;
> 
>  	buf_size = min_t(size_t, size, 512);
> 
> --
> 2.11.0