From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mout.kundenserver.de ([212.227.126.134]:64113 "EHLO mout.kundenserver.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752244AbcGNIbb (ORCPT ); Thu, 14 Jul 2016 04:31:31 -0400 From: Arnd Bergmann To: Niklas Cassel Cc: bhelgaas@google.com, robh+dt@kernel.org, mark.rutland@arm.com, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org Subject: Re: [PATCH] bindings: PCI: artpec: correct pci binding example Date: Thu, 14 Jul 2016 10:31:15 +0200 Message-ID: <12381657.aqKGT5pz07@wuerfel> In-Reply-To: <1336f919-e145-7875-9204-c1fc124fb9fe@axis.com> References: <1467934090-12834-1-git-send-email-niklass@axis.com> <1838529.X3K6mcn6MA@wuerfel> <1336f919-e145-7875-9204-c1fc124fb9fe@axis.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: linux-pci-owner@vger.kernel.org List-ID: On Thursday, July 14, 2016 1:54:20 AM CEST Niklas Cassel wrote: > On 07/08/2016 11:39 AM, Arnd Bergmann wrote: > > On Friday, July 8, 2016 1:28:10 AM CEST Niklas Cassel wrote: > >> From: Niklas Cassel > >> > >> - Increase config size. When using a PCIe switch, > >> the previous config size only had room for one device. > >> - Add bus range. Inherited optional property. > >> - Map downstream I/O to PCI address 0. We can map it to any > >> address, but let's be consistent with other drivers. > >> > >> Signed-off-by: Niklas Cassel > >> --- > >> Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt | 7 ++++--- > >> 1 file changed, 4 insertions(+), 3 deletions(-) > >> > >> diff --git a/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt > >> index 330a45b..5ecaea1 100644 > >> --- a/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt > >> +++ b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt > >> @@ -24,16 +24,17 @@ Example: > >> compatible = "axis,artpec6-pcie", "snps,dw-pcie"; > >> reg = <0xf8050000 0x2000 > >> 0xf8040000 0x1000 > >> - 0xc0000000 0x1000>; > >> + 0xc0000000 0x2000>; > > If this is your config space size > > > >> num-lanes = <2>; > >> + bus-range = <0x00 0xff>; > > then the bus range looks too large. These two are typically connected. > > I couldn't immediately see which config space access function is > > used, but if you have 0x1000 bytes per bus, then the bus range matching > > a 0x2000 byte config space would be either <0x00 0x01> or <0x00 0x02> > > depending whether the root bus is part of that range. > > I see your point, a config space size of 0x2000 is only enough to > hold two configuration space headers. > > However, all other PCIe controllers based on Synopsys DesignWare IP > with a config space size of 0x2000, uses a bus-range of 0x0-0xff. > (Except hisilicon which for some reason uses 0x0-0xf). > Isn't it better to be consistent with the other DesignWare based controllers? No, if we found a bug, we should fix it for all of them. > Also, isn't is possible to have a device behind bus 1, then nothing behind > bus 2, and then a device behind bus 3? > Not sure if this could actually happen though, since Linux appears to assign > the bus numbers, unless already defined by BIOS. I think this might happen with hotplugged devices. Arnd