linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Yinghai Lu <yinghai@kernel.org>
To: Thomas Gleixner <tglx@linutronix.de>, Ingo Molnar <mingo@elte.hu>,
	"H. Peter Anvin" <hpa@zytor.com>,
	Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	Yinghai Lu <yinghai@kernel.org>, Ingo Molnar <mingo@redhat.com>,
	Suresh Siddha <suresh.b.siddha@intel.com>
Subject: [PATCH 10/13] x86, irq: Make ioapics loop code skip blank slot
Date: Thu, 23 Feb 2012 19:48:56 -0800	[thread overview]
Message-ID: <1330055339-11662-11-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1330055339-11662-1-git-send-email-yinghai@kernel.org>

When multiple ioapics get added and removed, we could have blank slot in ioapics
array.

Add skip code in this case by check nr_registers.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
---
 arch/x86/kernel/apic/io_apic.c |   29 +++++++++++++++++++++++------
 1 files changed, 23 insertions(+), 6 deletions(-)

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 4517713..da02320 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -819,7 +819,8 @@ int save_ioapic_entries(void)
 	int err = 0;
 
 	for (apic = 0; apic < nr_ioapics; apic++) {
-		if (!ioapics[apic].saved_registers) {
+		if (!ioapics[apic].saved_registers &&
+		    ioapics[apic].nr_registers) {
 			err = -ENOMEM;
 			continue;
 		}
@@ -925,9 +926,12 @@ static int __init find_isa_irq_apic(int irq, int type)
 	if (i < mp_irq_entries) {
 		int ioapic_idx;
 
-		for (ioapic_idx = 0; ioapic_idx < nr_ioapics; ioapic_idx++)
+		for (ioapic_idx = 0; ioapic_idx < nr_ioapics; ioapic_idx++) {
+			if (!ioapics[ioapic_idx].nr_registers)
+				continue;
 			if (mpc_ioapic_id(ioapic_idx) == mp_irqs[i].dstapic)
 				return ioapic_idx;
+		}
 	}
 
 	return -1;
@@ -1158,10 +1162,13 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin,
 	for (i = 0; i < mp_irq_entries; i++) {
 		int lbus = mp_irqs[i].srcbus;
 
-		for (ioapic_idx = 0; ioapic_idx < nr_ioapics; ioapic_idx++)
+		for (ioapic_idx = 0; ioapic_idx < nr_ioapics; ioapic_idx++) {
+			if (!ioapics[ioapic_idx].nr_registers)
+				continue;
 			if (mpc_ioapic_id(ioapic_idx) == mp_irqs[i].dstapic ||
 			    mp_irqs[i].dstapic == MP_APIC_ALL)
 				break;
+		}
 
 		if (!test_bit(lbus, mp_bus_not_pci) &&
 		    !mp_irqs[i].irqtype &&
@@ -2188,6 +2195,9 @@ void __init setup_ioapic_ids_from_mpc_nocheck(void)
 	 * Set the IOAPIC ID to the value stored in the MPC table.
 	 */
 	for (ioapic_idx = 0; ioapic_idx < nr_ioapics; ioapic_idx++) {
+		if (!ioapics[ioapic_idx].nr_registers)
+			continue;
+
 		/* Read the register 0 value */
 		raw_spin_lock_irqsave(&ioapic_lock, flags);
 		reg_00.raw = io_apic_read(ioapic_idx, 0);
@@ -3153,8 +3163,12 @@ static void ioapic_resume(void)
 {
 	int ioapic_idx;
 
-	for (ioapic_idx = nr_ioapics - 1; ioapic_idx >= 0; ioapic_idx--)
+	for (ioapic_idx = nr_ioapics - 1; ioapic_idx >= 0; ioapic_idx--) {
+		if (!ioapics[ioapic_idx].nr_registers)
+			continue;
+
 		resume_ioapic_id(ioapic_idx);
+	}
 
 	restore_ioapic_entries();
 }
@@ -4065,8 +4079,11 @@ int mp_find_ioapic(u32 gsi)
 	/* Find the IOAPIC that manages this GSI. */
 	for (i = 0; i < nr_ioapics; i++) {
 		struct mp_ioapic_gsi *gsi_cfg = mp_ioapic_gsi_routing(i);
-		if ((gsi >= gsi_cfg->gsi_base)
-		    && (gsi <= gsi_cfg->gsi_end))
+
+		if (!ioapics[i].nr_registers)
+			continue;
+
+		if ((gsi >= gsi_cfg->gsi_base) && (gsi <= gsi_cfg->gsi_end))
 			return i;
 	}
 
-- 
1.7.7


  parent reply	other threads:[~2012-02-24  3:48 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-02-24  3:48 [PATCH 00/13] x86, irq: support ioapic device hotplug for x86 Yinghai Lu
2012-02-24  3:48 ` [PATCH 01/13] x86, irq: Convert irq_2_pin list to generic list Yinghai Lu
2012-02-24  3:48 ` [PATCH 02/13] genirq: Split __irq_reserve_irqs from irq_alloc_descs Yinghai Lu
2012-02-24  3:48 ` [PATCH 03/13] x86, irq: Add realloc_irq_and_cfg_at() Yinghai Lu
2012-02-24  3:48 ` [PATCH 04/13] x86, irq: pre-reserve irq range that are used by ioapic Yinghai Lu
2012-02-24  3:48 ` [PATCH 05/13] x86, irq: add ioapic_gsi_to_irq Yinghai Lu
2012-02-24  3:48 ` [PATCH 06/13] genirq: bail out early in free_desc() Yinghai Lu
2012-02-24  3:48 ` [PATCH 07/13] x86, irq: more strict check for register ioapic Yinghai Lu
2012-02-24  3:48 ` [PATCH 08/13] x86, irq: Make mp_register_ioapic could handle hotadd ioapic Yinghai Lu
2012-02-24  3:48 ` [PATCH 09/13] x86, irq: Add mp_unregister_ioapic could handle hotremove ioapic Yinghai Lu
2012-02-24  3:48 ` Yinghai Lu [this message]
2012-02-24  3:48 ` [PATCH 11/13] x86, acpi, irq: Enable pci device type ioapic hotplug Yinghai Lu
2012-02-24  3:48 ` [PATCH 12/13] PCI: Make sure hotplug ioapic driver get loaded early Yinghai Lu
2012-02-24  3:48 ` [PATCH 13/13] PCI: Disable mem in the ioapic removing path Yinghai Lu
2012-02-24 16:51 ` [PATCH 00/13] x86, irq: support ioapic device hotplug for x86 Jesse Barnes

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1330055339-11662-11-git-send-email-yinghai@kernel.org \
    --to=yinghai@kernel.org \
    --cc=hpa@zytor.com \
    --cc=jbarnes@virtuousgeek.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=mingo@elte.hu \
    --cc=mingo@redhat.com \
    --cc=suresh.b.siddha@intel.com \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).