From: Yinghai Lu <yinghai@kernel.org>
To: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH 01/11] PCI: Add class support in quirk handling
Date: Thu, 23 Feb 2012 23:46:49 -0800 [thread overview]
Message-ID: <1330069619-14446-2-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1330069619-14446-1-git-send-email-yinghai@kernel.org>
Recently there is new support to make quirk calling will report duration time.
That will boot log get more print out with initcall_debug is specified.
Found a lot of quirks are calling for not related devices.
Reason is quirk frame do not support class handling. So quirk code have to
use PCI_ANY_ID for vendor/device and let quirk code itself to check class
inside the func.
The patch add class and cls_shift into struct pci_fixup.
Also update related macro to accept the class and shift.
-v2: fix v1 that left over of sparated patch.
-v3: according to Jesse, change cls to class, cls_shift, to class_shift.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
drivers/pci/quirks.c | 12 +++++----
include/linux/pci.h | 63 +++++++++++++++++++++++++++++++++++++++++--------
2 files changed, 59 insertions(+), 16 deletions(-)
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index fb544d6..2b4b1ea 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -2961,17 +2961,19 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq);
static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f,
struct pci_fixup *end)
{
- while (f < end) {
- if ((f->vendor == dev->vendor || f->vendor == (u16) PCI_ANY_ID) &&
- (f->device == dev->device || f->device == (u16) PCI_ANY_ID)) {
+ for (; f < end; f++)
+ if ((f->class == (u32) (dev->class >> f->class_shift) ||
+ f->class == (u32) PCI_ANY_ID) &&
+ (f->vendor == dev->vendor ||
+ f->vendor == (u16) PCI_ANY_ID) &&
+ (f->device == dev->device ||
+ f->device == (u16) PCI_ANY_ID)) {
dev_dbg(&dev->dev, "calling %pF\n", f->hook);
if (initcall_debug)
do_one_fixup_debug(f->hook, dev);
else
f->hook(dev);
}
- f++;
- }
}
extern struct pci_fixup __start_pci_fixups_early[];
diff --git a/include/linux/pci.h b/include/linux/pci.h
index bcaa51c..ec32328 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1364,7 +1364,10 @@ static inline void pci_resource_to_user(const struct pci_dev *dev, int bar,
*/
struct pci_fixup {
- u16 vendor, device; /* You can use PCI_ANY_ID here of course */
+ u16 vendor; /* You can use PCI_ANY_ID here of course */
+ u16 device; /* You can use PCI_ANY_ID here of course */
+ u32 class; /* You can use PCI_ANY_ID here too */
+ unsigned int class_shift; /* should be 0, 8, 16 */
void (*hook)(struct pci_dev *dev);
};
@@ -1379,30 +1382,68 @@ enum pci_fixup_pass {
};
/* Anonymous variables would be nice... */
-#define DECLARE_PCI_FIXUP_SECTION(section, name, vendor, device, hook) \
- static const struct pci_fixup __pci_fixup_##name __used \
- __attribute__((__section__(#section))) = { vendor, device, hook };
+#define DECLARE_PCI_FIXUP_SECTION(section, name, vendor, device, class, \
+ class_shift, hook) \
+ static const struct pci_fixup const __pci_fixup_##name __used \
+ __attribute__((__section__(#section), aligned((sizeof(void *))))) \
+ = { vendor, device, class, class_shift, hook };
+
+#define DECLARE_PCI_FIXUP_CLASS_EARLY(vendor, device, class, \
+ class_shift, hook) \
+ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_early, \
+ vendor##device##hook, vendor, device, class, class_shift, hook)
+#define DECLARE_PCI_FIXUP_CLASS_HEADER(vendor, device, class, \
+ class_shift, hook) \
+ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_header, \
+ vendor##device##hook, vendor, device, class, class_shift, hook)
+#define DECLARE_PCI_FIXUP_CLASS_FINAL(vendor, device, class, \
+ class_shift, hook) \
+ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_final, \
+ vendor##device##hook, vendor, device, class, class_shift, hook)
+#define DECLARE_PCI_FIXUP_CLASS_ENABLE(vendor, device, class, \
+ class_shift, hook) \
+ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_enable, \
+ vendor##device##hook, vendor, device, class, class_shift, hook)
+#define DECLARE_PCI_FIXUP_CLASS_RESUME(vendor, device, class, \
+ class_shift, hook) \
+ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume, \
+ resume##vendor##device##hook, vendor, device, class, \
+ class_shift, hook)
+#define DECLARE_PCI_FIXUP_CLASS_RESUME_EARLY(vendor, device, class, \
+ class_shift, hook) \
+ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume_early, \
+ resume_early##vendor##device##hook, vendor, device, \
+ class, class_shift, hook)
+#define DECLARE_PCI_FIXUP_CLASS_SUSPEND(vendor, device, class, \
+ class_shift, hook) \
+ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_suspend, \
+ suspend##vendor##device##hook, vendor, device, class, \
+ class_shift, hook)
+
#define DECLARE_PCI_FIXUP_EARLY(vendor, device, hook) \
DECLARE_PCI_FIXUP_SECTION(.pci_fixup_early, \
- vendor##device##hook, vendor, device, hook)
+ vendor##device##hook, vendor, device, PCI_ANY_ID, 0, hook)
#define DECLARE_PCI_FIXUP_HEADER(vendor, device, hook) \
DECLARE_PCI_FIXUP_SECTION(.pci_fixup_header, \
- vendor##device##hook, vendor, device, hook)
+ vendor##device##hook, vendor, device, PCI_ANY_ID, 0, hook)
#define DECLARE_PCI_FIXUP_FINAL(vendor, device, hook) \
DECLARE_PCI_FIXUP_SECTION(.pci_fixup_final, \
- vendor##device##hook, vendor, device, hook)
+ vendor##device##hook, vendor, device, PCI_ANY_ID, 0, hook)
#define DECLARE_PCI_FIXUP_ENABLE(vendor, device, hook) \
DECLARE_PCI_FIXUP_SECTION(.pci_fixup_enable, \
- vendor##device##hook, vendor, device, hook)
+ vendor##device##hook, vendor, device, PCI_ANY_ID, 0, hook)
#define DECLARE_PCI_FIXUP_RESUME(vendor, device, hook) \
DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume, \
- resume##vendor##device##hook, vendor, device, hook)
+ resume##vendor##device##hook, vendor, device, \
+ PCI_ANY_ID, 0, hook)
#define DECLARE_PCI_FIXUP_RESUME_EARLY(vendor, device, hook) \
DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume_early, \
- resume_early##vendor##device##hook, vendor, device, hook)
+ resume_early##vendor##device##hook, vendor, device, \
+ PCI_ANY_ID, 0, hook)
#define DECLARE_PCI_FIXUP_SUSPEND(vendor, device, hook) \
DECLARE_PCI_FIXUP_SECTION(.pci_fixup_suspend, \
- suspend##vendor##device##hook, vendor, device, hook)
+ suspend##vendor##device##hook, vendor, device, \
+ PCI_ANY_ID, 0, hook)
#ifdef CONFIG_PCI_QUIRKS
void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev);
--
1.7.7
next prev parent reply other threads:[~2012-02-24 7:46 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-24 7:46 [PATCH -v2 00/11] PCI: quirk related clean up Yinghai Lu
2012-02-24 7:46 ` Yinghai Lu [this message]
2012-02-24 22:35 ` [PATCH 01/11] PCI: Add class support in quirk handling Jesse Barnes
2012-02-24 7:46 ` [PATCH 02/11] PCI: Use class for quirk for via_no_dac Yinghai Lu
2012-02-24 7:46 ` [PATCH 03/11] PCI: Use class quirk for intel fix_transparent_bridge Yinghai Lu
2012-02-24 7:46 ` [PATCH 04/11] PCI: Use class for quirk for pci_fixup_video Yinghai Lu
2012-02-24 7:46 ` [PATCH 05/11] PCI: Use class for quirk for host bridge mmio_always_on Yinghai Lu
2012-02-24 7:46 ` [PATCH 06/11] PCI: Use class for quirk for cardbus_legacy Yinghai Lu
2012-02-24 7:46 ` [PATCH 07/11] PCI: Use class for quirk for legacy ATA NO_D3 Yinghai Lu
2012-02-24 7:46 ` [PATCH 08/11] PCI: Use class for quirk for netmos class fixup Yinghai Lu
2012-02-24 7:46 ` [PATCH 09/11] PCI: Use class for quirk for intel e100 interrupt fixup Yinghai Lu
2012-02-24 7:46 ` [PATCH 10/11] PCI: Use class for quirk for ti816x class fixup Yinghai Lu
2012-02-24 7:46 ` [PATCH 11/11] PCI: Use class for quirk for usb host controller fixup Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1330069619-14446-2-git-send-email-yinghai@kernel.org \
--to=yinghai@kernel.org \
--cc=jbarnes@virtuousgeek.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).