From: Yinghai Lu <yinghai@kernel.org>
To: Jesse Barnes <jbarnes@virtuousgeek.org>, x86 <x86@kernel.org>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH 10/23] PCI, x86: Fix non acpi path pci_sysdata leaking with release_fn
Date: Mon, 5 Mar 2012 23:13:47 -0800 [thread overview]
Message-ID: <1331018040-30725-11-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1331018040-30725-1-git-send-email-yinghai@kernel.org>
non acpi path, or root is not probed from acpi, during root bus removal
will get warning about leaking from pci_scan_bus_on_node.
Fix it with setting pci_host_bridge release function.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/pci/common.c | 17 +++++++++++------
1 files changed, 11 insertions(+), 6 deletions(-)
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 8e04ec5..35931f6 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -618,17 +618,19 @@ int pci_ext_cfg_avail(struct pci_dev *dev)
return 0;
}
+static void release_pci_sysdata(struct pci_host_bridge *bridge)
+{
+ struct pci_sysdata *sd = bridge->release_data;
+
+ kfree(sd);
+}
+
struct pci_bus * __devinit pci_scan_bus_on_node(int busno, struct pci_ops *ops, int node)
{
LIST_HEAD(resources);
struct pci_bus *bus = NULL;
struct pci_sysdata *sd;
- /*
- * Allocate per-root-bus (not per bus) arch-specific data.
- * TODO: leak; this memory is never freed.
- * It's arguable whether it's worth the trouble to care.
- */
sd = kzalloc(sizeof(*sd), GFP_KERNEL);
if (!sd) {
printk(KERN_ERR "PCI: OOM, skipping PCI bus %02x\n", busno);
@@ -638,7 +640,10 @@ struct pci_bus * __devinit pci_scan_bus_on_node(int busno, struct pci_ops *ops,
x86_pci_root_bus_resources(busno, &resources);
printk(KERN_DEBUG "PCI: Probing PCI hardware (bus %02x)\n", busno);
bus = pci_scan_root_bus(NULL, busno, ops, sd, &resources);
- if (!bus) {
+ if (bus)
+ pci_set_host_bridge_release(to_pci_host_bridge(bus->bridge),
+ release_pci_sysdata, sd);
+ else {
pci_free_resource_list(&resources);
kfree(sd);
}
--
1.7.7
next prev parent reply other threads:[~2012-03-06 7:15 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-06 7:13 [PATCH 00/23] PCI, x86: pci root bus hotplug support Yinghai Lu
2012-03-06 7:13 ` [PATCH 01/23] PCI, sys: Use device_type and attr_groups with pci dev Yinghai Lu
2012-03-06 7:13 ` [PATCH 02/23] PCI, sysfs: create rescan_bridge under /sys/.../pci/devices/... for pci bridges Yinghai Lu
2012-03-09 0:52 ` Bjorn Helgaas
2012-03-09 6:42 ` Yinghai Lu
2012-03-09 17:07 ` Bjorn Helgaas
2012-03-06 7:13 ` [PATCH 03/23] PCI: Add pci_bus_add_single_device() Yinghai Lu
2012-03-06 7:13 ` [PATCH 04/23] PCI: make pci_rescan_bus_bridge_resize use pci_scan_bridge instead Yinghai Lu
2012-03-06 7:13 ` [PATCH 05/23] PCI: clean up rescan_bus_bridge_resize Yinghai Lu
2012-03-06 7:13 ` [PATCH 06/23] PCI: rescan with bus or bridge using callback method too Yinghai Lu
2012-03-09 0:56 ` Bjorn Helgaas
2012-03-09 6:53 ` Yinghai Lu
2012-03-09 17:22 ` Bjorn Helgaas
2012-03-09 19:05 ` Yinghai Lu
2012-03-09 19:11 ` Bjorn Helgaas
2012-03-06 7:13 ` [PATCH 07/23] pci, dmar: Update dmar units devices list during hotplug Yinghai Lu
2012-03-09 1:06 ` Bjorn Helgaas
2012-03-09 7:06 ` Yinghai Lu
2012-03-09 17:25 ` Bjorn Helgaas
2012-03-09 17:32 ` Yinghai Lu
2012-03-09 17:37 ` Bjorn Helgaas
2012-03-09 18:29 ` Yinghai Lu
2012-03-06 7:13 ` [PATCH 08/23] PNPACPI: Fix device ref leaking in acpi_pnp_match Yinghai Lu
2012-03-07 3:53 ` Bjorn Helgaas
2012-03-06 7:13 ` [PATCH 09/23] IOMMU: Fix tboot force iommu logic Yinghai Lu
2012-03-06 7:13 ` Yinghai Lu [this message]
2012-03-06 7:13 ` [PATCH 11/23] PCI: separate out pci_assign_unassigned_bus_resources() Yinghai Lu
2012-03-09 1:08 ` Bjorn Helgaas
2012-03-06 7:13 ` [PATCH 12/23] PCI: Move back pci_rescan_bus() Yinghai Lu
2012-03-06 7:13 ` [PATCH 13/23] PCI: move pci_stop_and_remove_behind_bridge down Yinghai Lu
2012-03-06 7:13 ` [PATCH 14/23] PCI: add __pci_remove_bus_devices() Yinghai Lu
2012-03-09 1:11 ` Bjorn Helgaas
2012-03-09 7:17 ` Yinghai Lu
2012-03-09 17:28 ` Bjorn Helgaas
2012-03-09 19:00 ` Yinghai Lu
2012-03-06 7:13 ` [PATCH 15/23] PCI: add pci_stop_and_remove_bus() Yinghai Lu
2012-03-06 7:13 ` [PATCH 16/23] PCI: add pci bus removal through /sys/.../pci_bus/.../remove Yinghai Lu
2012-03-08 0:03 ` Bjorn Helgaas
2012-03-08 0:53 ` Yinghai Lu
2012-03-08 4:45 ` Bjorn Helgaas
2012-03-08 15:45 ` Greg Kroah-Hartman
2012-03-06 7:13 ` [PATCH 17/23] PCI, ACPI: make acpi_pci_root_remove remove pci root bus too Yinghai Lu
2012-03-06 7:13 ` [PATCH 18/23] PCI, ACPI: add acpi_pci_root_rescan() Yinghai Lu
2012-03-07 4:40 ` Bjorn Helgaas
2012-03-06 7:13 ` [PATCH 19/23] PCI: add /sys/bus/pci/rescan_root Yinghai Lu
2012-03-07 4:31 ` Bjorn Helgaas
2012-03-07 6:37 ` Yinghai Lu
2012-03-06 7:13 ` [PATCH 20/23] PCI: add __pci_scan_root_bus() that can skip bus_add Yinghai Lu
2012-03-06 7:13 ` [PATCH 21/23] x86, PCI: add __pci_scan_root_bus_on_node() " Yinghai Lu
2012-03-06 7:13 ` [PATCH 22/23] x86, PCI: add __pcibios_scan_specific_bus " Yinghai Lu
2012-03-06 7:14 ` [PATCH 23/23] x86, PCI: add pcibios_root_rescan Yinghai Lu
2012-03-06 23:13 ` Bjorn Helgaas
2012-03-07 0:09 ` Yinghai Lu
2012-03-07 3:42 ` Bjorn Helgaas
2012-03-07 3:49 ` Bjorn Helgaas
2012-03-07 6:29 ` Yinghai Lu
2012-03-07 23:32 ` Bjorn Helgaas
2012-03-08 0:58 ` Yinghai Lu
2012-03-08 4:27 ` Bjorn Helgaas
2012-03-08 8:40 ` Jan Beulich
2012-03-07 4:44 ` [PATCH 00/23] PCI, x86: pci root bus hotplug support Bjorn Helgaas
2012-03-07 6:58 ` Yinghai Lu
2012-03-09 0:43 ` Bjorn Helgaas
2012-03-09 8:19 ` Yinghai Lu
2012-03-09 17:34 ` Bjorn Helgaas
2012-03-09 18:55 ` Yinghai Lu
2012-03-09 19:10 ` Bjorn Helgaas
2012-03-09 19:29 ` Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1331018040-30725-11-git-send-email-yinghai@kernel.org \
--to=yinghai@kernel.org \
--cc=jbarnes@virtuousgeek.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).