linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Yinghai Lu <yinghai@kernel.org>
To: Jesse Barnes <jbarnes@virtuousgeek.org>, x86 <x86@kernel.org>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	Yinghai Lu <yinghai@kernel.org>,
	Randy Dunlap <rdunlap@xenotime.net>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Subject: [PATCH 02/23] PCI, sysfs: create rescan_bridge under /sys/.../pci/devices/... for pci bridges
Date: Mon,  5 Mar 2012 23:13:39 -0800	[thread overview]
Message-ID: <1331018040-30725-3-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1331018040-30725-1-git-send-email-yinghai@kernel.org>

Current code will create rescan for every pci device under parent bus.
that is not right. the device is already there, there is no reason to rescan it.

We could have rescan for pci bridges. less confusing.

Need to move rescan attr to pci dev bridge attribute group.
And We should rescan bridge's secondary bus instead of primary bus.

-v3: Use device_type for pci dev.
-v4: Seperate pci device type change out
-v5: add rescan_bridge for bridge type, and still keep the old rescan.
	may remove the old rescan later.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Documentation/ABI/testing/sysfs-bus-pci |   10 ++++++++++
 drivers/pci/pci-sysfs.c                 |   24 ++++++++++++++++++++++++
 2 files changed, 34 insertions(+), 0 deletions(-)

diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci
index 34f5110..95f0f37 100644
--- a/Documentation/ABI/testing/sysfs-bus-pci
+++ b/Documentation/ABI/testing/sysfs-bus-pci
@@ -111,6 +111,16 @@ Description:
 		from this part of the device tree.
 		Depends on CONFIG_HOTPLUG.
 
+What:		/sys/bus/pci/devices/.../rescan_bridge
+Date:		February 2012
+Contact:	Linux PCI developers <linux-pci@vger.kernel.org>
+Description:
+		Writing a non-zero value to this attribute will
+		force a rescan of the bridge and all child buses, and
+		re-discover devices removed earlier from this part of
+		the device tree.
+		Depends on CONFIG_HOTPLUG.
+
 What:		/sys/bus/pci/devices/.../reset
 Date:		July 2009
 Contact:	Michael S. Tsirkin <mst@redhat.com>
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 39d15e6..d5c8ffb 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -325,6 +325,27 @@ dev_rescan_store(struct device *dev, struct device_attribute *attr,
 	return count;
 }
 
+static ssize_t
+dev_bridge_rescan_store(struct device *dev, struct device_attribute *attr,
+		 const char *buf, size_t count)
+{
+	unsigned long val;
+	struct pci_dev *pdev = to_pci_dev(dev);
+
+	if (kstrtoul(buf, 0, &val) < 0)
+		return -EINVAL;
+
+	if (val) {
+		mutex_lock(&pci_remove_rescan_mutex);
+		pci_rescan_bus(pdev->subordinate);
+		mutex_unlock(&pci_remove_rescan_mutex);
+	}
+	return count;
+}
+
+static struct device_attribute pci_dev_bridge_rescan_attr =
+	__ATTR(rescan_bridge, (S_IWUSR|S_IWGRP), NULL, dev_bridge_rescan_store);
+
 static void remove_callback(struct device *dev)
 {
 	struct pci_dev *pdev = to_pci_dev(dev);
@@ -1337,6 +1358,9 @@ static int __init pci_sysfs_init(void)
 late_initcall(pci_sysfs_init);
 
 static struct attribute *pci_dev_bridge_attrs[] = {
+#ifdef CONFIG_HOTPLUG
+	&pci_dev_bridge_rescan_attr.attr,
+#endif
 	NULL,
 };
 
-- 
1.7.7


  parent reply	other threads:[~2012-03-06  7:14 UTC|newest]

Thread overview: 68+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-03-06  7:13 [PATCH 00/23] PCI, x86: pci root bus hotplug support Yinghai Lu
2012-03-06  7:13 ` [PATCH 01/23] PCI, sys: Use device_type and attr_groups with pci dev Yinghai Lu
2012-03-06  7:13 ` Yinghai Lu [this message]
2012-03-09  0:52   ` [PATCH 02/23] PCI, sysfs: create rescan_bridge under /sys/.../pci/devices/... for pci bridges Bjorn Helgaas
2012-03-09  6:42     ` Yinghai Lu
2012-03-09 17:07       ` Bjorn Helgaas
2012-03-06  7:13 ` [PATCH 03/23] PCI: Add pci_bus_add_single_device() Yinghai Lu
2012-03-06  7:13 ` [PATCH 04/23] PCI: make pci_rescan_bus_bridge_resize use pci_scan_bridge instead Yinghai Lu
2012-03-06  7:13 ` [PATCH 05/23] PCI: clean up rescan_bus_bridge_resize Yinghai Lu
2012-03-06  7:13 ` [PATCH 06/23] PCI: rescan with bus or bridge using callback method too Yinghai Lu
2012-03-09  0:56   ` Bjorn Helgaas
2012-03-09  6:53     ` Yinghai Lu
2012-03-09 17:22       ` Bjorn Helgaas
2012-03-09 19:05         ` Yinghai Lu
2012-03-09 19:11           ` Bjorn Helgaas
2012-03-06  7:13 ` [PATCH 07/23] pci, dmar: Update dmar units devices list during hotplug Yinghai Lu
2012-03-09  1:06   ` Bjorn Helgaas
2012-03-09  7:06     ` Yinghai Lu
2012-03-09 17:25       ` Bjorn Helgaas
2012-03-09 17:32         ` Yinghai Lu
2012-03-09 17:37           ` Bjorn Helgaas
2012-03-09 18:29             ` Yinghai Lu
2012-03-06  7:13 ` [PATCH 08/23] PNPACPI: Fix device ref leaking in acpi_pnp_match Yinghai Lu
2012-03-07  3:53   ` Bjorn Helgaas
2012-03-06  7:13 ` [PATCH 09/23] IOMMU: Fix tboot force iommu logic Yinghai Lu
2012-03-06  7:13 ` [PATCH 10/23] PCI, x86: Fix non acpi path pci_sysdata leaking with release_fn Yinghai Lu
2012-03-06  7:13 ` [PATCH 11/23] PCI: separate out pci_assign_unassigned_bus_resources() Yinghai Lu
2012-03-09  1:08   ` Bjorn Helgaas
2012-03-06  7:13 ` [PATCH 12/23] PCI: Move back pci_rescan_bus() Yinghai Lu
2012-03-06  7:13 ` [PATCH 13/23] PCI: move pci_stop_and_remove_behind_bridge down Yinghai Lu
2012-03-06  7:13 ` [PATCH 14/23] PCI: add __pci_remove_bus_devices() Yinghai Lu
2012-03-09  1:11   ` Bjorn Helgaas
2012-03-09  7:17     ` Yinghai Lu
2012-03-09 17:28       ` Bjorn Helgaas
2012-03-09 19:00         ` Yinghai Lu
2012-03-06  7:13 ` [PATCH 15/23] PCI: add pci_stop_and_remove_bus() Yinghai Lu
2012-03-06  7:13 ` [PATCH 16/23] PCI: add pci bus removal through /sys/.../pci_bus/.../remove Yinghai Lu
2012-03-08  0:03   ` Bjorn Helgaas
2012-03-08  0:53     ` Yinghai Lu
2012-03-08  4:45       ` Bjorn Helgaas
2012-03-08 15:45         ` Greg Kroah-Hartman
2012-03-06  7:13 ` [PATCH 17/23] PCI, ACPI: make acpi_pci_root_remove remove pci root bus too Yinghai Lu
2012-03-06  7:13 ` [PATCH 18/23] PCI, ACPI: add acpi_pci_root_rescan() Yinghai Lu
2012-03-07  4:40   ` Bjorn Helgaas
2012-03-06  7:13 ` [PATCH 19/23] PCI: add /sys/bus/pci/rescan_root Yinghai Lu
2012-03-07  4:31   ` Bjorn Helgaas
2012-03-07  6:37     ` Yinghai Lu
2012-03-06  7:13 ` [PATCH 20/23] PCI: add __pci_scan_root_bus() that can skip bus_add Yinghai Lu
2012-03-06  7:13 ` [PATCH 21/23] x86, PCI: add __pci_scan_root_bus_on_node() " Yinghai Lu
2012-03-06  7:13 ` [PATCH 22/23] x86, PCI: add __pcibios_scan_specific_bus " Yinghai Lu
2012-03-06  7:14 ` [PATCH 23/23] x86, PCI: add pcibios_root_rescan Yinghai Lu
2012-03-06 23:13   ` Bjorn Helgaas
2012-03-07  0:09     ` Yinghai Lu
2012-03-07  3:42       ` Bjorn Helgaas
2012-03-07  3:49       ` Bjorn Helgaas
2012-03-07  6:29         ` Yinghai Lu
2012-03-07 23:32           ` Bjorn Helgaas
2012-03-08  0:58             ` Yinghai Lu
2012-03-08  4:27               ` Bjorn Helgaas
2012-03-08  8:40                 ` Jan Beulich
2012-03-07  4:44 ` [PATCH 00/23] PCI, x86: pci root bus hotplug support Bjorn Helgaas
2012-03-07  6:58   ` Yinghai Lu
2012-03-09  0:43     ` Bjorn Helgaas
2012-03-09  8:19       ` Yinghai Lu
2012-03-09 17:34         ` Bjorn Helgaas
2012-03-09 18:55           ` Yinghai Lu
2012-03-09 19:10             ` Bjorn Helgaas
2012-03-09 19:29               ` Yinghai Lu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1331018040-30725-3-git-send-email-yinghai@kernel.org \
    --to=yinghai@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jbarnes@virtuousgeek.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=rdunlap@xenotime.net \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).