From: Yinghai Lu <yinghai@kernel.org>
To: Jesse Barnes <jbarnes@virtuousgeek.org>, x86 <x86@kernel.org>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
Yinghai Lu <yinghai@kernel.org>,
stable@kernel.org, Len Brown <lenb@kernel.org>,
Adam Belay <abelay@mit.edu>, Bjorn Helgaas <bhelgaas@google.com>,
linux-acpi@vger.kernel.org
Subject: [PATCH 08/23] PNPACPI: Fix device ref leaking in acpi_pnp_match
Date: Mon, 5 Mar 2012 23:13:45 -0800 [thread overview]
Message-ID: <1331018040-30725-9-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1331018040-30725-1-git-send-email-yinghai@kernel.org>
During testing pci root bus removal, found some root bus bridge is not freed.
If booting with pnpacpi=off, those hostbridge could be freed without problem.
It turns out that some devices reference are not released during acpi_pnp_match.
that match should not hold one device ref during every calling.
Add put_device calling before returning.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: stable@kernel.org
Cc: Len Brown <lenb@kernel.org>
Cc: Adam Belay <abelay@mit.edu>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-acpi@vger.kernel.org
---
drivers/pnp/pnpacpi/core.c | 7 ++++++-
1 files changed, 6 insertions(+), 1 deletions(-)
diff --git a/drivers/pnp/pnpacpi/core.c b/drivers/pnp/pnpacpi/core.c
index b00c176..d21e8f5 100644
--- a/drivers/pnp/pnpacpi/core.c
+++ b/drivers/pnp/pnpacpi/core.c
@@ -321,9 +321,14 @@ static int __init acpi_pnp_match(struct device *dev, void *_pnp)
{
struct acpi_device *acpi = to_acpi_device(dev);
struct pnp_dev *pnp = _pnp;
+ struct device *physical_device;
+
+ physical_device = acpi_get_physical_device(acpi->handle);
+ if (physical_device)
+ put_device(physical_device);
/* true means it matched */
- return !acpi_get_physical_device(acpi->handle)
+ return !physical_device
&& compare_pnp_id(pnp->id, acpi_device_hid(acpi));
}
--
1.7.7
next prev parent reply other threads:[~2012-03-06 7:13 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-06 7:13 [PATCH 00/23] PCI, x86: pci root bus hotplug support Yinghai Lu
2012-03-06 7:13 ` [PATCH 01/23] PCI, sys: Use device_type and attr_groups with pci dev Yinghai Lu
2012-03-06 7:13 ` [PATCH 02/23] PCI, sysfs: create rescan_bridge under /sys/.../pci/devices/... for pci bridges Yinghai Lu
2012-03-09 0:52 ` Bjorn Helgaas
2012-03-09 6:42 ` Yinghai Lu
2012-03-09 17:07 ` Bjorn Helgaas
2012-03-06 7:13 ` [PATCH 03/23] PCI: Add pci_bus_add_single_device() Yinghai Lu
2012-03-06 7:13 ` [PATCH 04/23] PCI: make pci_rescan_bus_bridge_resize use pci_scan_bridge instead Yinghai Lu
2012-03-06 7:13 ` [PATCH 05/23] PCI: clean up rescan_bus_bridge_resize Yinghai Lu
2012-03-06 7:13 ` [PATCH 06/23] PCI: rescan with bus or bridge using callback method too Yinghai Lu
2012-03-09 0:56 ` Bjorn Helgaas
2012-03-09 6:53 ` Yinghai Lu
2012-03-09 17:22 ` Bjorn Helgaas
2012-03-09 19:05 ` Yinghai Lu
2012-03-09 19:11 ` Bjorn Helgaas
2012-03-06 7:13 ` [PATCH 07/23] pci, dmar: Update dmar units devices list during hotplug Yinghai Lu
2012-03-09 1:06 ` Bjorn Helgaas
2012-03-09 7:06 ` Yinghai Lu
2012-03-09 17:25 ` Bjorn Helgaas
2012-03-09 17:32 ` Yinghai Lu
2012-03-09 17:37 ` Bjorn Helgaas
2012-03-09 18:29 ` Yinghai Lu
2012-03-06 7:13 ` Yinghai Lu [this message]
2012-03-07 3:53 ` [PATCH 08/23] PNPACPI: Fix device ref leaking in acpi_pnp_match Bjorn Helgaas
2012-03-06 7:13 ` [PATCH 09/23] IOMMU: Fix tboot force iommu logic Yinghai Lu
2012-03-06 7:13 ` [PATCH 10/23] PCI, x86: Fix non acpi path pci_sysdata leaking with release_fn Yinghai Lu
2012-03-06 7:13 ` [PATCH 11/23] PCI: separate out pci_assign_unassigned_bus_resources() Yinghai Lu
2012-03-09 1:08 ` Bjorn Helgaas
2012-03-06 7:13 ` [PATCH 12/23] PCI: Move back pci_rescan_bus() Yinghai Lu
2012-03-06 7:13 ` [PATCH 13/23] PCI: move pci_stop_and_remove_behind_bridge down Yinghai Lu
2012-03-06 7:13 ` [PATCH 14/23] PCI: add __pci_remove_bus_devices() Yinghai Lu
2012-03-09 1:11 ` Bjorn Helgaas
2012-03-09 7:17 ` Yinghai Lu
2012-03-09 17:28 ` Bjorn Helgaas
2012-03-09 19:00 ` Yinghai Lu
2012-03-06 7:13 ` [PATCH 15/23] PCI: add pci_stop_and_remove_bus() Yinghai Lu
2012-03-06 7:13 ` [PATCH 16/23] PCI: add pci bus removal through /sys/.../pci_bus/.../remove Yinghai Lu
2012-03-08 0:03 ` Bjorn Helgaas
2012-03-08 0:53 ` Yinghai Lu
2012-03-08 4:45 ` Bjorn Helgaas
2012-03-08 15:45 ` Greg Kroah-Hartman
2012-03-06 7:13 ` [PATCH 17/23] PCI, ACPI: make acpi_pci_root_remove remove pci root bus too Yinghai Lu
2012-03-06 7:13 ` [PATCH 18/23] PCI, ACPI: add acpi_pci_root_rescan() Yinghai Lu
2012-03-07 4:40 ` Bjorn Helgaas
2012-03-06 7:13 ` [PATCH 19/23] PCI: add /sys/bus/pci/rescan_root Yinghai Lu
2012-03-07 4:31 ` Bjorn Helgaas
2012-03-07 6:37 ` Yinghai Lu
2012-03-06 7:13 ` [PATCH 20/23] PCI: add __pci_scan_root_bus() that can skip bus_add Yinghai Lu
2012-03-06 7:13 ` [PATCH 21/23] x86, PCI: add __pci_scan_root_bus_on_node() " Yinghai Lu
2012-03-06 7:13 ` [PATCH 22/23] x86, PCI: add __pcibios_scan_specific_bus " Yinghai Lu
2012-03-06 7:14 ` [PATCH 23/23] x86, PCI: add pcibios_root_rescan Yinghai Lu
2012-03-06 23:13 ` Bjorn Helgaas
2012-03-07 0:09 ` Yinghai Lu
2012-03-07 3:42 ` Bjorn Helgaas
2012-03-07 3:49 ` Bjorn Helgaas
2012-03-07 6:29 ` Yinghai Lu
2012-03-07 23:32 ` Bjorn Helgaas
2012-03-08 0:58 ` Yinghai Lu
2012-03-08 4:27 ` Bjorn Helgaas
2012-03-08 8:40 ` Jan Beulich
2012-03-07 4:44 ` [PATCH 00/23] PCI, x86: pci root bus hotplug support Bjorn Helgaas
2012-03-07 6:58 ` Yinghai Lu
2012-03-09 0:43 ` Bjorn Helgaas
2012-03-09 8:19 ` Yinghai Lu
2012-03-09 17:34 ` Bjorn Helgaas
2012-03-09 18:55 ` Yinghai Lu
2012-03-09 19:10 ` Bjorn Helgaas
2012-03-09 19:29 ` Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1331018040-30725-9-git-send-email-yinghai@kernel.org \
--to=yinghai@kernel.org \
--cc=abelay@mit.edu \
--cc=bhelgaas@google.com \
--cc=jbarnes@virtuousgeek.org \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=stable@kernel.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).