linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Yinghai Lu <yinghai@kernel.org>
To: Jesse Barnes <jbarnes@virtuousgeek.org>, x86 <x86@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>,
	Andrew Morton <akpm@linux-foundation.org>,
	Linus Torvalds <torvalds@linux-foundation.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH v2 05/37] PCI: Separate out pci_assign_unassigned_bus_resources()
Date: Fri,  9 Mar 2012 23:00:05 -0800	[thread overview]
Message-ID: <1331362837-10740-6-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1331362837-10740-1-git-send-email-yinghai@kernel.org>

It is main portion of pci_rescan_bus().

Separate it out and need to use it for pci root bus rescan later.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
 drivers/pci/setup-bus.c |   32 ++++++++++++++++++--------------
 include/linux/pci.h     |    1 +
 2 files changed, 19 insertions(+), 14 deletions(-)

diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 8fa2d4b..6443c81 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -1488,25 +1488,12 @@ enable_all:
 }
 EXPORT_SYMBOL_GPL(pci_assign_unassigned_bridge_resources);
 
-#ifdef CONFIG_HOTPLUG
-/**
- * pci_rescan_bus - scan a PCI bus for devices.
- * @bus: PCI bus to scan
- *
- * Scan a PCI bus and child buses for new devices, adds them,
- * and enables them.
- *
- * Returns the max number of subordinate bus discovered.
- */
-unsigned int __ref pci_rescan_bus(struct pci_bus *bus)
+void pci_assign_unassigned_bus_resources(struct pci_bus *bus)
 {
-	unsigned int max;
 	struct pci_dev *dev;
 	LIST_HEAD(add_list); /* list of resources that
 					want additional resources */
 
-	max = pci_scan_child_bus(bus);
-
 	down_read(&pci_bus_sem);
 	list_for_each_entry(dev, &bus->devices, bus_list)
 		if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
@@ -1519,6 +1506,23 @@ unsigned int __ref pci_rescan_bus(struct pci_bus *bus)
 	BUG_ON(!list_empty(&add_list));
 
 	pci_enable_bridges(bus);
+}
+#ifdef CONFIG_HOTPLUG
+/**
+ * pci_rescan_bus - scan a PCI bus for devices.
+ * @bus: PCI bus to scan
+ *
+ * Scan a PCI bus and child buses for new devices, adds them,
+ * and enables them.
+ *
+ * Returns the max number of subordinate bus discovered.
+ */
+unsigned int __ref pci_rescan_bus(struct pci_bus *bus)
+{
+	unsigned int max;
+
+	max = pci_scan_child_bus(bus);
+	pci_assign_unassigned_bus_resources(bus);
 	pci_bus_add_devices(bus);
 
 	return max;
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 40606c1..634bbf5 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -909,6 +909,7 @@ void pci_bus_size_bridges(struct pci_bus *bus);
 int pci_claim_resource(struct pci_dev *, int);
 void pci_assign_unassigned_resources(void);
 void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge);
+void pci_assign_unassigned_bus_resources(struct pci_bus *bus);
 void pdev_enable_device(struct pci_dev *);
 int pci_enable_resources(struct pci_dev *, int mask);
 void pci_fixup_irqs(u8 (*)(struct pci_dev *, u8 *),
-- 
1.7.7


  parent reply	other threads:[~2012-03-10  7:00 UTC|newest]

Thread overview: 65+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-03-10  7:00 [PATCH v2 00/37] PCI, x86: pci root bus hotplug support Yinghai Lu
2012-03-10  7:00 ` [PATCH v2 01/37] IOMMU: Update dmar units devices list during hotplug Yinghai Lu
2012-03-10  7:00 ` [PATCH v2 02/37] PNPACPI: Fix device ref leaking in acpi_pnp_match Yinghai Lu
2012-03-13  2:40   ` Bjorn Helgaas
2012-03-10  7:00 ` [PATCH v2 03/37] IOMMU: Fix tboot force iommu logic Yinghai Lu
2012-03-10  7:00 ` [PATCH v2 04/37] x86, PCI: Fix non acpi path pci_sysdata leaking with release_fn Yinghai Lu
2012-03-10  7:00 ` Yinghai Lu [this message]
2012-03-10  7:00 ` [PATCH v2 06/37] PCI: Move back pci_rescan_bus() Yinghai Lu
2012-03-10  7:00 ` [PATCH v2 07/37] PCI: pci_bus_size_bridges() should not size own bridge Yinghai Lu
2012-03-13  2:47   ` Bjorn Helgaas
2012-03-10  7:00 ` [PATCH v2 08/37] PCI: Use __pci_bus_size_bridges() directly in pci_assign_unassigned_bus_resources() Yinghai Lu
2012-03-10  7:00 ` [PATCH v2 09/37] PCI, sysfs: Use device_type and attr_groups with pci dev Yinghai Lu
2012-03-10  7:00 ` [PATCH v2 10/37] PCI, sysfs: create rescan_bridge under /sys/.../pci/devices/... for pci bridges Yinghai Lu
2012-03-13  2:55   ` Bjorn Helgaas
2012-03-13  5:48     ` Yinghai Lu
2012-03-10  7:00 ` [PATCH v2 11/37] PCI: Add pci_bus_add_single_device() Yinghai Lu
2012-03-10  7:00 ` [PATCH v2 12/37] PCI: Make pci_rescan_bus_bridge_resize() use pci_scan_bridge instead Yinghai Lu
2012-03-10  7:00 ` [PATCH v2 13/37] PCI: Clean up rescan_bus_bridge_resize() Yinghai Lu
2012-03-10  7:00 ` [PATCH v2 14/37] PCI: Rescan bus or bridge using callback method too Yinghai Lu
2012-03-10  7:00 ` [PATCH v2 15/37] PCI, sysfs: Clean up rescan/remove with scheule_callback Yinghai Lu
2012-03-10  7:00 ` [PATCH v2 16/37] PCI: Move pci_stop_and_remove_behind_bridge() down Yinghai Lu
2012-03-10  7:00 ` [PATCH v2 17/37] PCI: Add __pci_remove_bus_devices() Yinghai Lu
2012-03-10  7:00 ` [PATCH v2 18/37] PCI: Use list_for_each_entry_safe instead of list_for_each_safe Yinghai Lu
2012-03-10  7:00 ` [PATCH v2 19/37] PCI: Add pci_stop_and_remove_bus() Yinghai Lu
2012-03-12 15:58   ` Jiang Liu
2012-03-13  6:22     ` Yinghai Lu
2012-03-10  7:00 ` [PATCH v2 20/37] PCI: Add pci bus removal through /sys/.../pci_bus/.../remove Yinghai Lu
2012-03-13  3:10   ` Bjorn Helgaas
2012-03-13  5:54     ` Yinghai Lu
2012-03-15 17:33       ` Bjorn Helgaas
2012-03-10  7:00 ` [PATCH v2 21/37] PCI, ACPI: Make acpi_pci_root_remove remove pci root bus too Yinghai Lu
2012-03-13  3:11   ` Bjorn Helgaas
2012-03-10  7:00 ` [PATCH v2 22/37] PCI, acpiphp: remove hot-add support of pci host bridge Yinghai Lu
2012-03-13  3:14   ` Bjorn Helgaas
2012-03-13  5:58     ` Yinghai Lu
2012-03-15 17:34       ` Bjorn Helgaas
2012-03-10  7:00 ` [PATCH v2 23/37] PCI, ACPI: Add pci_root_hp hot add hotplug notification Yinghai Lu
2012-03-13  3:22   ` Bjorn Helgaas
2012-03-13  6:03     ` Yinghai Lu
2012-03-15 17:47       ` Bjorn Helgaas
2012-03-10  7:00 ` [PATCH v2 24/37] PCI, ACPI: Add pci_root_hp hot removal notification support Yinghai Lu
2012-03-13  3:25   ` Bjorn Helgaas
2012-03-13  6:06     ` Yinghai Lu
2012-03-15 17:53       ` Bjorn Helgaas
2012-03-15 18:01         ` Yinghai Lu
2012-03-15 18:09           ` Bjorn Helgaas
2012-03-10  7:00 ` [PATCH v2 25/37] PCI, ACPI: Add alloc_acpi_hp_work() Yinghai Lu
2012-03-10  7:00 ` [PATCH v2 26/37] PCI, acpiphp: Use acpi_hp_work Yinghai Lu
2012-03-10  7:00 ` [PATCH v2 27/37] PCI, pci_root_hp: " Yinghai Lu
2012-03-10  7:00 ` [PATCH v2 28/37] PCI, ACPI: Make kacpi_hotplug_wq static Yinghai Lu
2012-03-10  7:00 ` [PATCH v2 29/37] PCI, ACPI: Add acpi_pci_root_rescan() Yinghai Lu
2012-03-13  3:33   ` Bjorn Helgaas
2012-03-10  7:00 ` [PATCH v2 30/37] PCI: Add __pci_scan_root_bus() that can skip bus_add Yinghai Lu
2012-03-10  7:00 ` [PATCH v2 31/37] x86, PCI: add __pci_scan_root_bus_on_node() " Yinghai Lu
2012-03-10  7:00 ` [PATCH v2 32/37] x86, PCI: add __pcibios_scan_specific_bus " Yinghai Lu
2012-03-10  7:00 ` [PATCH v2 33/37] x86, PCI: Add pcibios_root_rescan() Yinghai Lu
2012-03-13  3:37   ` Bjorn Helgaas
2012-03-10  7:00 ` [PATCH v2 34/37] x86, PCI: Add arch version pci_root_rescan() Yinghai Lu
2012-03-13  3:40   ` Bjorn Helgaas
2012-03-10  7:00 ` [PATCH v2 35/37] PCI: Make /sys/bus/pci/rescan rescan root Yinghai Lu
2012-03-13  3:44   ` Bjorn Helgaas
2012-03-13  6:26     ` Yinghai Lu
2012-03-15 17:55       ` Bjorn Helgaas
2012-03-10  7:00 ` [PATCH v2 36/37] ACPI: Enable SCI_EMULATE to manually simulate physical hotplug testing Yinghai Lu
2012-03-10  7:00 ` [PATCH v2 37/37] PCI, sysfs: Prepare to kill pci device rescan Yinghai Lu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1331362837-10740-6-git-send-email-yinghai@kernel.org \
    --to=yinghai@kernel.org \
    --cc=akpm@linux-foundation.org \
    --cc=bhelgaas@google.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=jbarnes@virtuousgeek.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=torvalds@linux-foundation.org \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).