linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Yinghai Lu <yinghai@kernel.org>
To: Jesse Barnes <jbarnes@virtuousgeek.org>, x86 <x86@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>,
	Andrew Morton <akpm@linux-foundation.org>,
	Linus Torvalds <torvalds@linux-foundation.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH -v3 07/47] PCI: pci_bus_size_bridges() should not size own bridge
Date: Sun, 18 Mar 2012 22:45:56 -0700	[thread overview]
Message-ID: <1332135996-13860-8-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1332135996-13860-1-git-send-email-yinghai@kernel.org>

During checking acpiphp code, found following sequence:
        pci_bus_size_bridges(bus);
        pci_bus_assign_resources(bus);
	pci_enable_bridges(bus);

The problem is that when bus is not root bus, pci_bus_size_bridges would also size
own pci bridge bus->self if that bridge resource is not inserted before.
but later pci_bus_assign_resources will not allocate those size bridge res.

So try make it less confusing, let it does not include self sizing.
and add with_self parameter info __pci_bus_size_bridge()

Fixes caller in pci hotplug componets.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
 drivers/pci/hotplug/acpiphp_glue.c     |    3 ++-
 drivers/pci/hotplug/cpci_hotplug_pci.c |    2 +-
 drivers/pci/hotplug/shpchp_pci.c       |    2 +-
 drivers/pci/setup-bus.c                |   24 +++++++++++++++---------
 include/linux/pci.h                    |    1 +
 5 files changed, 20 insertions(+), 12 deletions(-)

diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 806c44f..6aaf9ff 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -816,7 +816,8 @@ static int __ref enable_device(struct acpiphp_slot *slot)
 			    dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) {
 				max = pci_scan_bridge(bus, dev, max, pass);
 				if (pass && dev->subordinate)
-					pci_bus_size_bridges(dev->subordinate);
+					pci_bus_size_bridges_with_self(
+							dev->subordinate);
 			}
 		}
 	}
diff --git a/drivers/pci/hotplug/cpci_hotplug_pci.c b/drivers/pci/hotplug/cpci_hotplug_pci.c
index ae853cc..4ef80ad 100644
--- a/drivers/pci/hotplug/cpci_hotplug_pci.c
+++ b/drivers/pci/hotplug/cpci_hotplug_pci.c
@@ -313,7 +313,7 @@ int __ref cpci_configure_slot(struct slot *slot)
 				continue;
 			}
 			child->subordinate = pci_do_scan_bus(child);
-			pci_bus_size_bridges(child);
+			pci_bus_size_bridges_with_self(child);
 		}
 		pci_dev_put(dev);
 	}
diff --git a/drivers/pci/hotplug/shpchp_pci.c b/drivers/pci/hotplug/shpchp_pci.c
index df7e4bf..d92807b 100644
--- a/drivers/pci/hotplug/shpchp_pci.c
+++ b/drivers/pci/hotplug/shpchp_pci.c
@@ -85,7 +85,7 @@ int __ref shpchp_configure_device(struct slot *p_slot)
 				continue;
 			}
 			child->subordinate = pci_do_scan_bus(child);
-			pci_bus_size_bridges(child);
+			pci_bus_size_bridges_with_self(child);
 		}
 		pci_configure_slot(dev);
 		pci_dev_put(dev);
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index f35a679..ec2026c 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -982,8 +982,8 @@ handle_done:
 	;
 }
 
-void __ref __pci_bus_size_bridges(struct pci_bus *bus,
-			struct list_head *realloc_head)
+static void __ref __pci_bus_size_bridges(struct pci_bus *bus,
+			struct list_head *realloc_head, bool with_self)
 {
 	struct pci_dev *dev;
 	unsigned long mask, prefmask;
@@ -1001,13 +1001,13 @@ void __ref __pci_bus_size_bridges(struct pci_bus *bus,
 
 		case PCI_CLASS_BRIDGE_PCI:
 		default:
-			__pci_bus_size_bridges(b, realloc_head);
+			__pci_bus_size_bridges(b, realloc_head, true);
 			break;
 		}
 	}
 
-	/* The root bus? */
-	if (!bus->self)
+	/* Is root bus or not wanted? */
+	if (!bus->self || !with_self)
 		return;
 
 	switch (bus->self->class >> 8) {
@@ -1047,9 +1047,15 @@ void __ref __pci_bus_size_bridges(struct pci_bus *bus,
 	}
 }
 
+void __ref pci_bus_size_bridges_with_self(struct pci_bus *bus)
+{
+	__pci_bus_size_bridges(bus, NULL, true);
+}
+EXPORT_SYMBOL(pci_bus_size_bridges_with_self);
+
 void __ref pci_bus_size_bridges(struct pci_bus *bus)
 {
-	__pci_bus_size_bridges(bus, NULL);
+	__pci_bus_size_bridges(bus, NULL, false);
 }
 EXPORT_SYMBOL(pci_bus_size_bridges);
 
@@ -1362,7 +1368,7 @@ again:
 	/* Depth first, calculate sizes and alignments of all
 	   subordinate buses. */
 	list_for_each_entry(bus, &pci_root_buses, node)
-		__pci_bus_size_bridges(bus, add_list);
+		__pci_bus_size_bridges(bus, add_list, false);
 
 	/* Depth last, allocate resources and update the hardware. */
 	list_for_each_entry(bus, &pci_root_buses, node)
@@ -1439,7 +1445,7 @@ void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge)
 				  IORESOURCE_PREFETCH;
 
 again:
-	__pci_bus_size_bridges(parent, &add_list);
+	__pci_bus_size_bridges(parent, &add_list, true);
 	__pci_bridge_assign_resources(bridge, &add_list, &fail_head);
 	BUG_ON(!list_empty(&add_list));
 	tried_times++;
@@ -1500,7 +1506,7 @@ void pci_assign_unassigned_bus_resources(struct pci_bus *bus)
 		    dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)
 			if (dev->subordinate)
 				__pci_bus_size_bridges(dev->subordinate,
-							 &add_list);
+						 &add_list, true);
 	up_read(&pci_bus_sem);
 	__pci_bus_assign_resources(bus, &add_list, NULL);
 	BUG_ON(!list_empty(&add_list));
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 634bbf5..87dceca 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -906,6 +906,7 @@ int pci_vpd_truncate(struct pci_dev *dev, size_t size);
 resource_size_t pcibios_retrieve_fw_addr(struct pci_dev *dev, int idx);
 void pci_bus_assign_resources(const struct pci_bus *bus);
 void pci_bus_size_bridges(struct pci_bus *bus);
+void pci_bus_size_bridges_with_self(struct pci_bus *bus);
 int pci_claim_resource(struct pci_dev *, int);
 void pci_assign_unassigned_resources(void);
 void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge);
-- 
1.7.7


  parent reply	other threads:[~2012-03-19  5:45 UTC|newest]

Thread overview: 58+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-03-19  5:45 [PATCH 00/47] PCI, x86: pci root bus hotplug support Yinghai Lu
2012-03-19  5:45 ` [PATCH -v3 01/47] IOMMU: Update dmar units devices list during hotplug Yinghai Lu
2012-03-19  5:45 ` [PATCH -v3 02/47] PNPACPI: Fix device ref leaking in acpi_pnp_match Yinghai Lu
2012-03-19  5:45 ` [PATCH -v3 03/47] IOMMU: Fix tboot force iommu logic Yinghai Lu
2012-03-19  5:45 ` [PATCH -v3 04/47] x86, PCI: Fix non acpi path pci_sysdata leaking with release_fn Yinghai Lu
2012-03-19  5:45 ` [PATCH -v3 05/47] PCI: Separate out pci_assign_unassigned_bus_resources() Yinghai Lu
2012-03-19  5:45 ` [PATCH -v3 06/47] PCI: Move back pci_rescan_bus() Yinghai Lu
2012-03-19  5:45 ` Yinghai Lu [this message]
2012-03-19  5:45 ` [PATCH -v3 08/47] PCI: Use __pci_bus_size_bridges() directly in pci_assign_unassigned_bus_resources() Yinghai Lu
2012-03-19  5:45 ` [PATCH -v3 09/47] PCI, sysfs: Use device_type and attr_groups with pci dev Yinghai Lu
2012-03-19  5:45 ` [PATCH -v3 10/47] PCI, sysfs: create rescan_bridge under /sys/.../pci/devices/... for pci bridges Yinghai Lu
2012-03-19  5:46 ` [PATCH -v3 11/47] PCI: Add pci_bus_add_single_device() Yinghai Lu
2012-03-19  5:46 ` [PATCH -v3 12/47] PCI: Make pci_rescan_bus_bridge_resize() use pci_scan_bridge instead Yinghai Lu
2012-03-19  5:46 ` [PATCH -v3 13/47] PCI: Clean up rescan_bus_bridge_resize() Yinghai Lu
2012-03-19  5:46 ` [PATCH -v3 14/47] PCI: Rescan bus or bridge using callback method too Yinghai Lu
2012-03-19  5:46 ` [PATCH -v3 15/47] PCI, sysfs: Clean up rescan/remove with scheule_callback Yinghai Lu
2012-03-19  5:46 ` [PATCH -v3 16/47] x86, PCI: Separate pcibios_allocate_bridge_resources() Yinghai Lu
2012-03-19  5:46 ` [PATCH -v3 17/47] x86, PCI: Separate pcibios_allocate_dev_resources() Yinghai Lu
2012-03-19  5:46 ` [PATCH -v3 18/47] x86, PCI: Let pcibios_allocate_bus_resources() take bus instead Yinghai Lu
2012-03-19  5:46 ` [PATCH -v3 19/47] PCI: Claim hw/fw allocated resources in hot add path Yinghai Lu
2012-03-19  5:46 ` [PATCH -v3 20/47] Correctly clean up pci root buses in function pci_remove_bus() Yinghai Lu
2012-03-19  5:46 ` [PATCH -v3 21/47] PCI: Move pci_stop_and_remove_behind_bridge() down Yinghai Lu
2012-03-19  5:46 ` [PATCH -v3 22/47] PCI: Add __pci_remove_bus_devices() Yinghai Lu
2012-03-19  5:46 ` [PATCH -v3 23/47] PCI: Use list_for_each_entry_safe instead of list_for_each_safe Yinghai Lu
2012-03-19  5:46 ` [PATCH -v3 24/47] PCI: Add pci_stop_and_remove_bus() Yinghai Lu
2012-03-19  5:46 ` [PATCH -v3 25/47] Fix an access-after-free issue in function pci_stop_and_remove_bus() Yinghai Lu
2012-03-19  5:46 ` [PATCH -v3 26/47] PCI, ACPI: Make acpi_pci_root_remove remove pci root bus too Yinghai Lu
2012-03-19  5:46 ` [PATCH -v3 27/47] PCI, acpiphp: Separate out hot-add support of pci host bridge Yinghai Lu
2012-03-19  5:46 ` [PATCH -v3 28/47] PCI, ACPI: Add pci_root_hp hot removal notification support Yinghai Lu
2012-03-19  5:46 ` [PATCH -v3 29/47] PCI, ACPI: Add alloc_acpi_hp_work() Yinghai Lu
2012-03-19  5:46 ` [PATCH -v3 30/47] PCI, acpiphp: Use acpi_hp_work Yinghai Lu
2012-03-19  5:46 ` [PATCH -v3 31/47] PCI, pci_root_hp: " Yinghai Lu
2012-03-19  5:46 ` [PATCH -v3 32/47] PCI, ACPI: Make kacpi_hotplug_wq static Yinghai Lu
2012-03-19  5:46 ` [PATCH -v3 33/47] PCI: Add debug print out for pci related dev release Yinghai Lu
2012-03-19  5:46 ` [PATCH -v3 34/47] PCI, pciehp: Separate pci_hp_add_bridge() Yinghai Lu
2012-03-19  5:46 ` [PATCH -v3 35/47] PCI, cphi_hotplug: Simplify configure_slot Yinghai Lu
2012-03-19  5:46 ` [PATCH -v3 36/47] PCI, shpchp: Simplify configure_device Yinghai Lu
2012-03-19  5:46 ` [PATCH -v3 37/47] PCI: Kill pci_is_reassignedev() Yinghai Lu
2012-03-19  5:46 ` [PATCH -v3 38/47] PCI, sysfs: Prepare to kill pci device rescan Yinghai Lu
2012-03-19  5:46 ` [PATCH -v3 39/47] ACPI: Enable SCI_EMULATE to manually simulate physical hotplug testing Yinghai Lu
2012-03-19  5:46 ` [PATCH -v3 40/47] PCI: Add pci bus removal through /sys/.../pci_bus/.../remove Yinghai Lu
2012-04-06 15:50   ` Jiang Liu
2012-04-06 16:01     ` Yinghai Lu
2012-04-06 16:07       ` Bjorn Helgaas
2012-04-06 16:22         ` Jiang Liu
     [not found]         ` <CAE9FiQUjsiEvGGZz4sPux5AM7ipDsqgqgh5bh2QA7GJVBTqDKw@mail.gmail.com>
2012-04-06 17:42           ` Fwd: " Yinghai Lu
2012-04-06 18:05             ` Bjorn Helgaas
2012-04-06 18:11               ` Yinghai Lu
2012-03-19  5:46 ` [PATCH -v3 41/47] PCI, ACPI: Add acpi_pci_root_rescan() Yinghai Lu
2012-03-19  5:46 ` [PATCH -v3 42/47] PCI: Add __pci_scan_root_bus() that can skip bus_add Yinghai Lu
2012-03-19  5:46 ` [PATCH -v3 43/47] x86, PCI: add __pci_scan_root_bus_on_node() " Yinghai Lu
2012-03-19  5:46 ` [PATCH -v3 44/47] x86, PCI: add __pcibios_scan_specific_bus " Yinghai Lu
2012-03-19  5:46 ` [PATCH -v3 45/47] x86, PCI: Add pcibios_root_rescan() Yinghai Lu
2012-03-19  5:46 ` [PATCH -v3 46/47] x86, PCI: Add arch version pci_root_rescan() Yinghai Lu
2012-03-19  5:46 ` [PATCH -v3 47/47] PCI: Add /sys/bus/pci/rescan_root Yinghai Lu
2012-03-19 21:37 ` [PATCH 00/47] PCI, x86: pci root bus hotplug support Bjorn Helgaas
2012-03-20 17:20   ` Yinghai Lu
2012-03-30 18:27 ` Yinghai Lu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1332135996-13860-8-git-send-email-yinghai@kernel.org \
    --to=yinghai@kernel.org \
    --cc=akpm@linux-foundation.org \
    --cc=bhelgaas@google.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=jbarnes@virtuousgeek.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=torvalds@linux-foundation.org \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).