From: Yinghai Lu <yinghai@kernel.org>
To: Jesse Barnes <jbarnes@virtuousgeek.org>, x86 <x86@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>,
Andrew Morton <akpm@linux-foundation.org>,
Linus Torvalds <torvalds@linux-foundation.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH -v2 23/26] PCI: Make assign/update resource to support addon_res
Date: Sun, 18 Mar 2012 22:48:46 -0700 [thread overview]
Message-ID: <1332136129-14010-24-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1332136129-14010-1-git-send-email-yinghai@kernel.org>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
drivers/pci/setup-res.c | 24 ++++++++++++++++++------
1 files changed, 18 insertions(+), 6 deletions(-)
diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
index 161a015..4c6c924 100644
--- a/drivers/pci/setup-res.c
+++ b/drivers/pci/setup-res.c
@@ -33,7 +33,7 @@ void pci_update_resource(struct pci_dev *dev, int resno)
u32 new, check, mask;
int reg;
enum pci_bar_type type;
- struct resource *res = dev->resource + resno;
+ struct resource *res = pci_dev_resource_n(dev, resno);
/*
* Ignore resources for unimplemented BARs and unused resource slots
@@ -50,6 +50,21 @@ void pci_update_resource(struct pci_dev *dev, int resno)
if (res->flags & IORESOURCE_PCI_FIXED)
return;
+ if (resno >= PCI_NUM_RESOURCES) {
+ struct pci_dev_addon_resource *addon_res;
+
+ addon_res = to_pci_dev_addon_resource(res);
+ reg = addon_res->reg_addr;
+ if (addon_res->ops) {
+ addon_res->ops->write(dev, res, reg);
+ return;
+ }
+ } else
+ reg = pci_resource_bar(dev, resno, &type);
+
+ if (!reg)
+ return;
+
pcibios_resource_to_bus(dev, ®ion, res);
new = region.start | (res->flags & PCI_REGION_FLAG_MASK);
@@ -58,9 +73,6 @@ void pci_update_resource(struct pci_dev *dev, int resno)
else
mask = (u32)PCI_BASE_ADDRESS_MEM_MASK;
- reg = pci_resource_bar(dev, resno, &type);
- if (!reg)
- return;
if (type != pci_bar_unknown) {
if (!(res->flags & IORESOURCE_ROM_ENABLE))
return;
@@ -257,7 +269,7 @@ int pci_reassign_resource(struct pci_dev *dev, int resno, resource_size_t addsiz
if (!ret) {
res->flags &= ~IORESOURCE_STARTALIGN;
dev_info(&dev->dev, "BAR %d: reassigned %pR\n", resno, res);
- if (resno < PCI_BRIDGE_RESOURCES)
+ if (!resno_is_for_bridge(resno))
pci_update_resource(dev, resno);
}
return ret;
@@ -292,7 +304,7 @@ int pci_assign_resource(struct pci_dev *dev, int resno)
if (!ret) {
res->flags &= ~IORESOURCE_STARTALIGN;
dev_info(&dev->dev, "BAR %d: assigned %pR\n", resno, res);
- if (resno < PCI_BRIDGE_RESOURCES)
+ if (!resno_is_for_bridge(resno))
pci_update_resource(dev, resno);
}
return ret;
--
1.7.7
next prev parent reply other threads:[~2012-03-19 5:50 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-19 5:48 [PATCH -v2 00/26] PCI, x86: Add for_each_res and addon resource support Yinghai Lu
2012-03-19 5:48 ` [PATCH -v2 01/26] PCI: Add pci_dev_resource_n() Yinghai Lu
2012-03-19 5:48 ` [PATCH -v2 02/26] PCI: Add for_each_resource helpers to make resource loop easier Yinghai Lu
2012-03-19 5:48 ` [PATCH -v2 03/26] PCI: Add pci_dev_resource_idx() Yinghai Lu
2012-03-19 5:48 ` [PATCH -v2 04/26] PCI: Update pci_resource_start to use pci_dev_resource_n() Yinghai Lu
2012-03-19 5:48 ` [PATCH -v2 05/26] x86, PCI: Use for_each_res with pci_allocate_bridge_resources Yinghai Lu
2012-03-19 5:48 ` [PATCH -v2 06/26] x86, PCI: Use for_each_res with pci_allocate_dev_resources Yinghai Lu
2012-03-19 5:48 ` [PATCH -v2 07/26] PCI: Use for_each_res with IOV releated funcs Yinghai Lu
2012-03-19 5:48 ` [PATCH -v2 08/26] PCI, acpiphp: Use for_each_pci_dev_resource helper Yinghai Lu
2012-03-19 5:48 ` [PATCH -v2 09/26] PCI, pciehp: " Yinghai Lu
2012-03-19 5:48 ` [PATCH -v2 10/26] PCI: Use for_each_pci_dev_resource pci_enable_dev Yinghai Lu
2012-03-19 5:48 ` [PATCH -v2 11/26] PCI: Use for_each_pci_dev_resource pci_reassigndev Yinghai Lu
2012-03-19 5:48 ` [PATCH -v2 12/26] PCI: Use for_each_res with pci bar reassign funcs Yinghai Lu
2012-03-19 5:48 ` [PATCH -v2 13/26] PCI: Use for_each_res pci_assign_resource Yinghai Lu
2012-03-19 5:48 ` [PATCH -v2 14/26] PCI: Use for_each_res with noassign_bars Yinghai Lu
2012-03-19 5:48 ` [PATCH -v2 15/26] PCI: Use for_each_res pci bases pci_dev_driver() Yinghai Lu
2012-03-19 5:48 ` [PATCH -v2 16/26] PCI: Use for_each_res pci release release Yinghai Lu
2012-03-19 5:48 ` [PATCH -v2 17/26] PCI: Use for_each_res pci bases reading Yinghai Lu
2012-03-19 5:48 ` [PATCH -v2 18/26] PCI: Use for_each_res with mrs Yinghai Lu
2012-03-19 5:48 ` [PATCH -v2 19/26] PCI: Use for_each_res with xen pci Yinghai Lu
2012-03-19 5:48 ` [PATCH -v2 20/26] PCI: Add addon_resource support for pci_dev Yinghai Lu
2012-03-19 5:48 ` [PATCH -v2 21/26] PCI: Add helpers for add addon_resource Yinghai Lu
2012-03-19 5:48 ` [PATCH -v2 22/26] PCI: Update pci_resource_bar() to support addon_resource Yinghai Lu
2012-03-19 5:48 ` Yinghai Lu [this message]
2012-03-19 5:48 ` [PATCH -v2 24/26] PCI: Make piix4 quirk to use addon_resource support Yinghai Lu
2012-03-19 5:48 ` [PATCH -v2 25/26] PCI: Make quirk_io_region " Yinghai Lu
2012-03-19 5:48 ` [PATCH -v2 26/26] PCI: Use addon_fixed_resource with ati fixed resource Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1332136129-14010-24-git-send-email-yinghai@kernel.org \
--to=yinghai@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=bhelgaas@google.com \
--cc=gregkh@linuxfoundation.org \
--cc=jbarnes@virtuousgeek.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).