From: Jiang Liu <liuj97@gmail.com>
To: Bjorn Helgaas <bhelgaas@google.com>,
Yinghai Lu <yinghai@kernel.org>,
Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Cc: Jiang Liu <jiang.liu@huawei.com>,
matsumoto.hiroo@jp.fujitsu.com, Jiang Liu <liuj97@gmail.com>,
Keping Chen <chenkeping@huawei.com>,
linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org
Subject: [RFC PATCH 2/2] PCI: fix four race windows in shpchp driver
Date: Sun, 8 Apr 2012 02:18:55 +0800 [thread overview]
Message-ID: <1333822735-10902-2-git-send-email-jiang.liu@huawei.com> (raw)
In-Reply-To: <1333822735-10902-1-git-send-email-jiang.liu@huawei.com>
With current shpchp implementation, interrupt is enabled before corresponding
slot data structures are created. If interrupt happens immediately after
enabling the hotplug interrupt, shpchp_find_slot() may return NULL, thus
causes NULL pointer dereference. So create slot data structures before
enabling interrupt.
The second one is, shpc_isr() may cause invalid memory access if it walks
the slot list when cleanup_slots() is modifying the list. So only call
cleanup_slots() after disabling interrupt/removing the poll timer.
The third one is, del_timer() can't reliabily remove the poll timer, so
use del_timer_sync() instead.
The fourth one is, cleanup_slots() can't reliabily flush all work items.
So tune the workqueue flushing logic to reliabily flush all work items.
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
---
Hi all,
These issues are identified by code analysis and I have no hardware
platform to verify the patches. Could anybody give me a hand here to test
these patches?
Thanks!
Gerry
---
drivers/pci/hotplug/shpchp.h | 1 +
drivers/pci/hotplug/shpchp_core.c | 8 ++++----
drivers/pci/hotplug/shpchp_hpc.c | 36 +++++++++++++++++++++---------------
3 files changed, 26 insertions(+), 19 deletions(-)
diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h
index ca64932..6691dc4 100644
--- a/drivers/pci/hotplug/shpchp.h
+++ b/drivers/pci/hotplug/shpchp.h
@@ -182,6 +182,7 @@ extern int shpchp_unconfigure_device(struct slot *p_slot);
extern void cleanup_slots(struct controller *ctrl);
extern void shpchp_queue_pushbutton_work(struct work_struct *work);
extern int shpc_init( struct controller *ctrl, struct pci_dev *pdev);
+extern void shpc_enable_intr(struct controller *ctrl);
static inline const char *slot_name(struct slot *slot)
{
diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c
index 7414fd9..19762b3 100644
--- a/drivers/pci/hotplug/shpchp_core.c
+++ b/drivers/pci/hotplug/shpchp_core.c
@@ -173,8 +173,8 @@ void cleanup_slots(struct controller *ctrl)
list_for_each_safe(tmp, next, &ctrl->slot_list) {
slot = list_entry(tmp, struct slot, slot_list);
list_del(&slot->slot_list);
- cancel_delayed_work(&slot->work);
flush_workqueue(shpchp_wq);
+ cancel_delayed_work_sync(&slot->work);
flush_workqueue(shpchp_ordered_wq);
pci_hp_deregister(slot->hotplug_slot);
}
@@ -318,14 +318,14 @@ static int shpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
goto err_out_release_ctlr;
}
+ shpc_enable_intr(ctrl);
+
rc = shpchp_create_ctrl_files(ctrl);
if (rc)
- goto err_cleanup_slots;
+ goto err_out_release_ctlr;
return 0;
-err_cleanup_slots:
- cleanup_slots(ctrl);
err_out_release_ctlr:
ctrl->hpc_ops->release_ctlr(ctrl);
err_out_free_ctrl:
diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c
index 75ba231..ff63887 100644
--- a/drivers/pci/hotplug/shpchp_hpc.c
+++ b/drivers/pci/hotplug/shpchp_hpc.c
@@ -592,6 +592,13 @@ static void hpc_release_ctlr(struct controller *ctrl)
shpc_writel(ctrl, SLOT_REG(i), slot_reg);
}
+ if (shpchp_poll_mode)
+ del_timer_sync(&ctrl->poll_timer);
+ else {
+ free_irq(ctrl->pci_dev->irq, ctrl);
+ pci_disable_msi(ctrl->pci_dev);
+ }
+
cleanup_slots(ctrl);
/*
@@ -603,13 +610,6 @@ static void hpc_release_ctlr(struct controller *ctrl)
serr_int &= ~SERR_INTR_RSVDZ_MASK;
shpc_writel(ctrl, SERR_INTR_ENABLE, serr_int);
- if (shpchp_poll_mode)
- del_timer(&ctrl->poll_timer);
- else {
- free_irq(ctrl->pci_dev->irq, ctrl);
- pci_disable_msi(ctrl->pci_dev);
- }
-
iounmap(ctrl->creg);
release_mem_region(ctrl->mmio_base, ctrl->mmio_size);
}
@@ -1081,6 +1081,20 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev)
shpc_get_max_bus_speed(ctrl);
shpc_get_cur_bus_speed(ctrl);
+ return 0;
+
+ /* We end up here for the many possible ways to fail this API. */
+abort_iounmap:
+ iounmap(ctrl->creg);
+abort:
+ return rc;
+}
+
+void shpc_enable_intr(struct controller *ctrl)
+{
+ u8 hp_slot;
+ u32 tempdword, slot_reg;
+
/*
* Unmask all event interrupts of all slots
*/
@@ -1102,12 +1116,4 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev)
tempdword = shpc_readl(ctrl, SERR_INTR_ENABLE);
ctrl_dbg(ctrl, "SERR_INTR_ENABLE = %x\n", tempdword);
}
-
- return 0;
-
- /* We end up here for the many possible ways to fail this API. */
-abort_iounmap:
- iounmap(ctrl->creg);
-abort:
- return rc;
}
--
1.7.5.4
next prev parent reply other threads:[~2012-04-07 18:21 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-07 18:18 [RFC PATCH 1/2] PCI: correctly flush workqueue when destroy pcie hotplug controller Jiang Liu
2012-04-07 18:18 ` Jiang Liu [this message]
2012-04-10 10:43 ` Kenji Kaneshige
2012-04-25 17:23 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1333822735-10902-2-git-send-email-jiang.liu@huawei.com \
--to=liuj97@gmail.com \
--cc=bhelgaas@google.com \
--cc=chenkeping@huawei.com \
--cc=jiang.liu@huawei.com \
--cc=kaneshige.kenji@jp.fujitsu.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=matsumoto.hiroo@jp.fujitsu.com \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).