From: Yinghai Lu <yinghai@kernel.org>
To: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org, Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH 3/7] PCI, shpchp: Simplify configure_device
Date: Mon, 7 May 2012 13:29:12 -0700 [thread overview]
Message-ID: <1336422556-4124-4-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1336422556-4124-1-git-send-email-yinghai@kernel.org>
For child p2p bridge hotplug support should use pci_scan_bridge instead.
Make it more simillar to pciehp, just use pci_hp_add_bridge()
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
drivers/pci/hotplug/shpchp_pci.c | 45 ++++++++++++-------------------------
1 files changed, 15 insertions(+), 30 deletions(-)
diff --git a/drivers/pci/hotplug/shpchp_pci.c b/drivers/pci/hotplug/shpchp_pci.c
index df7e4bf..c627ed9 100644
--- a/drivers/pci/hotplug/shpchp_pci.c
+++ b/drivers/pci/hotplug/shpchp_pci.c
@@ -37,9 +37,10 @@
int __ref shpchp_configure_device(struct slot *p_slot)
{
struct pci_dev *dev;
- struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate;
- int num, fn;
struct controller *ctrl = p_slot->ctrl;
+ struct pci_dev *bridge = ctrl->pci_dev;
+ struct pci_bus *parent = bridge->subordinate;
+ int num, fn;
dev = pci_get_slot(parent, PCI_DEVFN(p_slot->device, 0));
if (dev) {
@@ -61,39 +62,23 @@ int __ref shpchp_configure_device(struct slot *p_slot)
if (!dev)
continue;
if ((dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) ||
- (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)) {
- /* Find an unused bus number for the new bridge */
- struct pci_bus *child;
- unsigned char busnr, start = parent->secondary;
- unsigned char end = parent->subordinate;
- for (busnr = start; busnr <= end; busnr++) {
- if (!pci_find_bus(pci_domain_nr(parent),
- busnr))
- break;
- }
- if (busnr > end) {
- ctrl_err(ctrl,
- "No free bus for hot-added bridge\n");
- pci_dev_put(dev);
- continue;
- }
- child = pci_add_new_bus(parent, dev, busnr);
- if (!child) {
- ctrl_err(ctrl, "Cannot add new bus for %s\n",
- pci_name(dev));
- pci_dev_put(dev);
- continue;
- }
- child->subordinate = pci_do_scan_bus(child);
- pci_bus_size_bridges(child);
- }
+ (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS))
+ pci_hp_add_bridge(dev);
+ pci_dev_put(dev);
+ }
+
+ pci_assign_unassigned_bridge_resources(bridge);
+
+ for (fn = 0; fn < 8; fn++) {
+ dev = pci_get_slot(parent, PCI_DEVFN(p_slot->device, fn));
+ if (!dev)
+ continue;
pci_configure_slot(dev);
pci_dev_put(dev);
}
- pci_bus_assign_resources(parent);
pci_bus_add_devices(parent);
- pci_enable_bridges(parent);
+
return 0;
}
--
1.7.7
next prev parent reply other threads:[~2012-05-07 20:29 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-07 20:29 [PATCH 0/7] PCI: hotplug bridge replated clean up Yinghai Lu
2012-05-07 20:29 ` [PATCH 1/7] PCI, pciehp: Separate pci_hp_add_bridge() Yinghai Lu
2012-05-07 20:29 ` [PATCH 2/7] PCI, cpci_hotplug: Simplify configure_slot Yinghai Lu
2012-05-07 20:29 ` Yinghai Lu [this message]
2012-05-07 20:29 ` [PATCH 4/7] PCI, cpqhp: Using pci_hp_add_bridge Yinghai Lu
2012-05-07 20:29 ` [PATCH 5/7] PCI, ibmhp: " Yinghai Lu
2012-05-07 20:29 ` [PATCH 6/7] PCI, sgihp: " Yinghai Lu
2012-05-07 20:29 ` [PATCH 7/7] PCI, hotplug: remove pci_do_scan_bus() Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1336422556-4124-4-git-send-email-yinghai@kernel.org \
--to=yinghai@kernel.org \
--cc=bhelgaas@google.com \
--cc=linux-pci@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).