linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Prarit Bhargava <prarit@redhat.com>
To: linux-pci@vger.kernel.org
Cc: Prarit Bhargava <prarit@redhat.com>, Bjorn Helgaas <bhelgaas@google.com>
Subject: [PATCH] pci, Add AER_panic sysfs file
Date: Thu, 17 May 2012 13:04:30 -0400	[thread overview]
Message-ID: <1337274270-18785-1-git-send-email-prarit@redhat.com> (raw)

Consider the following case

		[ RP ]
		  |
		  |
	+---------+-----------+
	|	  |	      |
       [H1]      [H2]        [X1]

where RP is a PCIE Root Port, H1 and H2 are devices with drivers that support
PCIE AER driver error handling (ie, they have pci_error_handlers defined in
the driver), and X1 is a device with a driver that does not support PCIE
AER driver error handling.

If the Root Port takes an error what currently happens is that the
bus resets and H1 & H2 call their slot_reset functions.  X1 does nothing.

In some cases a user may not wish the system to continue because X1 is
an unhardened driver.  In these cases, the system should not do a bus reset,
but rather the system should panic to avoid any further possible data
corruption.

This patch implements an AER_panic sysfs entry for each root port which
a user can modify.  AER_panic = 1, means the system will panic on a
PCIE error which would have normally resulted in a secondary bus reset.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
---
 drivers/pci/pci-sysfs.c       |   42 ++++++++++++++++++++++++++++++++++++++++-
 drivers/pci/pcie/aer/aerdrv.c |    3 ++
 include/linux/pci.h           |    1 +
 3 files changed, 45 insertions(+), 1 deletions(-)

diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index a55e248..8c6d525 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -1135,6 +1135,35 @@ static ssize_t reset_store(struct device *dev,
 
 static struct device_attribute reset_attr = __ATTR(reset, 0200, NULL, reset_store);
 
+static ssize_t AER_panic_show(struct device *dev,
+				 struct device_attribute *attr, char *buf)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+
+	return sprintf(buf, "%d\n", pdev->rp_AER_panic);
+}
+
+static ssize_t AER_panic_store(struct device *dev,
+				  struct device_attribute *attr,
+				  const char *buf, size_t count)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	unsigned long val;
+
+	if (kstrtoul(buf, 0, &val) < 0)
+		return -EINVAL;
+
+	if ((val > 1) || (val < 0))
+		return -EINVAL;
+
+	pdev->rp_AER_panic = val;
+
+	return count;
+}
+
+static struct device_attribute rp_AER_panic_attr =
+	      __ATTR(AER_panic, 0600, AER_panic_show, AER_panic_store);
+
 static int pci_create_capabilities_sysfs(struct pci_dev *dev)
 {
 	int retval;
@@ -1169,8 +1198,16 @@ static int pci_create_capabilities_sysfs(struct pci_dev *dev)
 			goto error;
 		dev->reset_fn = 1;
 	}
-	return 0;
 
+	/* PCIE Root Port panic-on-AER allows a user to configure each root
+	 * port to panic on an AER error instead of issuing a bus reset.
+	 */
+	if (dev->pcie_type == PCI_EXP_TYPE_ROOT_PORT) {
+		retval = device_create_file(&dev->dev, &rp_AER_panic_attr);
+		if (retval)
+			goto error;
+	}
+	return 0;
 error:
 	pcie_aspm_remove_sysfs_dev_files(dev);
 	if (dev->vpd && dev->vpd->attr) {
@@ -1279,6 +1316,9 @@ static void pci_remove_capabilities_sysfs(struct pci_dev *dev)
 		device_remove_file(&dev->dev, &reset_attr);
 		dev->reset_fn = 0;
 	}
+
+	if (dev->pcie_type == PCI_EXP_TYPE_ROOT_PORT)
+		device_remove_file(&dev->dev, &rp_AER_panic_attr);
 }
 
 /**
diff --git a/drivers/pci/pcie/aer/aerdrv.c b/drivers/pci/pcie/aer/aerdrv.c
index 58ad791..dd6b352 100644
--- a/drivers/pci/pcie/aer/aerdrv.c
+++ b/drivers/pci/pcie/aer/aerdrv.c
@@ -346,6 +346,9 @@ static pci_ers_result_t aer_root_reset(struct pci_dev *dev)
 	u32 reg32;
 	int pos;
 
+	if (dev->rp_AER_panic)
+		panic("%s: AER detected on Root Port", pci_name(dev));
+
 	pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
 
 	/* Disable Root's interrupt in response to error messages */
diff --git a/include/linux/pci.h b/include/linux/pci.h
index e444f5b..a4e6a5a 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -324,6 +324,7 @@ struct pci_dev {
 	unsigned int    is_hotplug_bridge:1;
 	unsigned int    __aer_firmware_first_valid:1;
 	unsigned int	__aer_firmware_first:1;
+	unsigned int	rp_AER_panic:1; /* if 1, panic on AER bus reset */
 	pci_dev_flags_t dev_flags;
 	atomic_t	enable_cnt;	/* pci_enable_device has been called */
 
-- 
1.7.7.6


             reply	other threads:[~2012-05-17 17:04 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-05-17 17:04 Prarit Bhargava [this message]
2012-05-17 17:29 ` [PATCH] pci, Add AER_panic sysfs file Shyam_Iyer
2012-05-17 17:39   ` Prarit Bhargava
2012-05-17 17:51     ` Shyam_Iyer
     [not found]     ` <DBFB1B45AF80394ABD1C807E9F28D15707BC712175@BLRX7MCDC203.AMER.DELL.COM>
2012-05-17 18:00       ` Shyam_Iyer
2012-05-17 18:51 ` Don Dutile
2012-05-17 18:54   ` Prarit Bhargava
2012-05-17 19:11     ` Don Dutile
2012-05-17 22:16       ` Prarit Bhargava
2012-05-17 21:32 ` Betty Dall
2012-05-18  4:51 ` Greg KH
2012-05-18 10:26   ` Prarit Bhargava
2012-05-18 14:16   ` Prarit Bhargava
2012-05-18 15:47     ` Greg KH
2012-05-18 17:17       ` Prarit Bhargava
2012-05-18 18:13         ` Greg KH
2012-05-18 19:28           ` Prarit Bhargava
2012-05-18 23:19             ` Greg KH
2012-05-18 17:26       ` Prarit Bhargava

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1337274270-18785-1-git-send-email-prarit@redhat.com \
    --to=prarit@redhat.com \
    --cc=bhelgaas@google.com \
    --cc=linux-pci@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).