From: Yinghai Lu <yinghai@kernel.org>
To: Bjorn Helgaas <bhelgaas@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>,
Linus Torvalds <torvalds@linux-foundation.org>,
linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH 11/11] PCI: Treat ROM resource as optional during assigning.
Date: Tue, 22 May 2012 23:34:37 -0700 [thread overview]
Message-ID: <1337754877-19759-12-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1337754877-19759-1-git-send-email-yinghai@kernel.org>
So will try to allocate them together with requested ones, if can not assign
them, could go with requested one only, and just skip ROM resource.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
drivers/pci/setup-bus.c | 21 +++++++--------------
include/linux/pci.h | 5 +++++
2 files changed, 12 insertions(+), 14 deletions(-)
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index ed32864..41c08d6 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -305,18 +305,10 @@ static void assign_requested_resources_sorted(struct list_head *head,
idx = res - &dev_res->dev->resource[0];
if (resource_size(res) &&
pci_assign_resource_fit(dev_res->dev, idx, fit)) {
- if (fail_head) {
- /*
- * if the failed res is for ROM BAR, and it will
- * be enabled later, don't add it to the list
- */
- if (!((idx == PCI_ROM_RESOURCE) &&
- (!(res->flags & IORESOURCE_ROM_ENABLE))))
- add_to_list(fail_head,
- dev_res->dev, res,
- 0 /* dont care */,
- 0 /* dont care */);
- }
+ if (fail_head)
+ add_to_list(fail_head, dev_res->dev, res,
+ 0 /* dont care */,
+ 0 /* dont care */);
reset_resource(res);
}
}
@@ -833,8 +825,9 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
continue;
r_size = resource_size(r);
- /* put SRIOV requested res to the optional list */
- if (realloc_head && is_pci_iov_resource_idx(i)) {
+ /* put SRIOV/ROM requested res to the optional list */
+ if (realloc_head && (is_pci_iov_resource_idx(i) ||
+ is_pci_rom_resource_idx(i))) {
r->end = r->start - 1;
add_to_list(realloc_head, dev, r, r_size, 0/* dont' care */);
children_add_size += r_size;
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 0d254d9..08c081c 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -122,6 +122,11 @@ static inline bool is_pci_iov_resource_idx(int i)
return false;
}
+static inline bool is_pci_rom_resource_idx(int i)
+{
+ return i == PCI_ROM_RESOURCE;
+}
+
typedef int __bitwise pci_power_t;
#define PCI_D0 ((pci_power_t __force) 0)
--
1.7.7
prev parent reply other threads:[~2012-05-23 6:34 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-23 6:34 [PATCH 00/11] PCI: resource allocation related Yinghai Lu
2012-05-23 6:34 ` [PATCH 01/11] PCI: Should add children device res to fail list Yinghai Lu
2012-05-23 6:34 ` [PATCH 02/11] PCI: Try to allocate mem64 above 4G at first Yinghai Lu
2012-05-23 15:57 ` Linus Torvalds
2012-05-23 17:30 ` Yinghai Lu
2012-05-23 18:40 ` Yinghai Lu
2012-05-25 4:36 ` Bjorn Helgaas
2012-05-25 17:53 ` Yinghai Lu
2012-05-25 18:39 ` Yinghai Lu
2012-05-25 19:37 ` Bjorn Helgaas
2012-05-25 20:18 ` H. Peter Anvin
2012-05-25 20:19 ` Yinghai Lu
2012-05-25 21:55 ` Bjorn Helgaas
2012-05-25 21:58 ` H. Peter Anvin
2012-05-25 22:14 ` Bjorn Helgaas
2012-05-25 23:10 ` Yinghai Lu
2012-05-26 0:12 ` Bjorn Helgaas
2012-05-26 15:01 ` Bjorn Helgaas
2012-05-29 17:56 ` Yinghai Lu
2012-05-29 17:55 ` Yinghai Lu
2012-05-29 17:57 ` H. Peter Anvin
2012-05-29 18:17 ` Yinghai Lu
2012-05-29 19:03 ` H. Peter Anvin
2012-05-29 20:46 ` Yinghai Lu
2012-05-29 20:50 ` H. Peter Anvin
2012-06-01 23:30 ` Yinghai Lu
2012-06-04 1:05 ` Bjorn Helgaas
2012-06-05 2:37 ` Yinghai Lu
2012-06-05 4:50 ` Bjorn Helgaas
2012-06-05 5:04 ` Yinghai Lu
2012-06-06 9:44 ` Steven Newbury
2012-06-06 16:18 ` Bjorn Helgaas
[not found] ` <CAGLnvc_ejMWiiubVMo7DLz5ZVn1iMbf67FB4H7crRCCTRRqt2A@mail.gmail.com>
2012-07-04 3:00 ` joeyli
2012-05-29 20:53 ` David Miller
2012-05-29 19:23 ` Bjorn Helgaas
2012-05-29 20:40 ` Yinghai Lu
2012-05-29 23:24 ` Bjorn Helgaas
2012-05-29 23:27 ` Bjorn Helgaas
2012-05-29 23:33 ` Yinghai Lu
2012-05-29 23:47 ` Bjorn Helgaas
2012-05-30 7:40 ` Steven Newbury
2012-05-30 16:27 ` Bjorn Helgaas
2012-05-30 16:30 ` H. Peter Anvin
2012-05-30 16:33 ` Linus Torvalds
2012-05-23 6:34 ` [PATCH 03/11] intel-gtt: Read 64bit for gmar_bus_addr Yinghai Lu
2012-05-23 7:21 ` Dave Airlie
2012-05-23 7:44 ` Daniel Vetter
2012-05-23 6:34 ` [PATCH 04/11] PCI: Make sure assign same align with large size resource at first Yinghai Lu
2012-05-23 6:34 ` [PATCH 05/11] resources: Split out __allocate_resource() Yinghai Lu
2012-05-23 6:34 ` [PATCH 06/11] resource: make find_resource could return just fit resource Yinghai Lu
2012-05-23 6:34 ` [PATCH 07/11] PCI: Don't allocate small resource in big empty space Yinghai Lu
2012-05-23 6:34 ` [PATCH 08/11] resource: only return range with needed align Yinghai Lu
2012-05-23 6:34 ` [PATCH 09/11] PCI: Add is_pci_iov_resource_idx() Yinghai Lu
2012-05-23 6:34 ` [PATCH 10/11] PCI: Sort unassigned resources with correct alignment Yinghai Lu
2012-05-23 6:34 ` Yinghai Lu [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1337754877-19759-12-git-send-email-yinghai@kernel.org \
--to=yinghai@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=bhelgaas@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).