[PATCH 5/9] arm: move PCI fixup hooks from __init to __devinit

[Sebastian Andrzej Siewior <sebastian@breakpoint.cc>]

The fixups are executed once the pci-device is found which is during
boot process so __init seems fine as long as the platform does not
support hotplug.
However it is possible to remove the PCI bus at run time and have it
rediscovered again via "echo 1 > /sys/bus/pci/rescan" and this will call
the fixups again.

Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
---
 arch/arm/kernel/bios32.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c
index 2555250..1c1a0e2 100644
--- a/arch/arm/kernel/bios32.c
+++ b/arch/arm/kernel/bios32.c
@@ -253,7 +253,7 @@ static void __devinit pci_fixup_cy82c693(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, pci_fixup_cy82c693);
 
-static void __init pci_fixup_it8152(struct pci_dev *dev)
+static void __devinit pci_fixup_it8152(struct pci_dev *dev)
 {
 	int i;
 	/* fixup for ITE 8152 devices */
-- 
1.7.10