From: Jiang Liu <liuj97@gmail.com>
To: Bjorn Helgaas <bhelgaas@google.com>, Don Dutile <ddutile@redhat.com>
Cc: Jiang Liu <jiang.liu@huawei.com>, Yinghai Lu <yinghai@kernel.org>,
Taku Izumi <izumi.taku@jp.fujitsu.com>,
"Rafael J . Wysocki" <rjw@sisk.pl>,
Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>,
Yijing Wang <wangyijing@huawei.com>,
linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org,
Jiang Liu <liuj97@gmail.com>
Subject: [RFC PATCH v2 10/32] PCI/AER: use PCIe capabilities access functions to simplify implementation
Date: Wed, 25 Jul 2012 00:31:22 +0800 [thread overview]
Message-ID: <1343147504-25891-11-git-send-email-jiang.liu@huawei.com> (raw)
In-Reply-To: <1343147504-25891-1-git-send-email-jiang.liu@huawei.com>
From: Jiang Liu <jiang.liu@huawei.com>
Use PCIe capabilities access functions to simplify PCIe AER implementation.
Signed-off-by: Jiang Liu <liuj97@gmail.com>
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
drivers/pci/pcie/aer/aerdrv.c | 16 +++++++---------
drivers/pci/pcie/aer/aerdrv_core.c | 25 ++++++++++---------------
2 files changed, 17 insertions(+), 24 deletions(-)
diff --git a/drivers/pci/pcie/aer/aerdrv.c b/drivers/pci/pcie/aer/aerdrv.c
index f7c6245..cadee93 100644
--- a/drivers/pci/pcie/aer/aerdrv.c
+++ b/drivers/pci/pcie/aer/aerdrv.c
@@ -122,19 +122,18 @@ static void set_downstream_devices_error_reporting(struct pci_dev *dev,
static void aer_enable_rootport(struct aer_rpc *rpc)
{
struct pci_dev *pdev = rpc->rpd->port;
- int pos, aer_pos;
+ int aer_pos;
u16 reg16;
u32 reg32;
- pos = pci_pcie_cap(pdev);
/* Clear PCIe Capability's Device Status */
- pci_read_config_word(pdev, pos+PCI_EXP_DEVSTA, ®16);
- pci_write_config_word(pdev, pos+PCI_EXP_DEVSTA, reg16);
+ pci_pcie_capability_read_word(pdev, PCI_EXP_DEVSTA, ®16);
+ pci_pcie_capability_write_word(pdev, PCI_EXP_DEVSTA, reg16);
/* Disable system error generation in response to error messages */
- pci_read_config_word(pdev, pos + PCI_EXP_RTCTL, ®16);
+ pci_pcie_capability_read_word(pdev, PCI_EXP_RTCTL, ®16);
reg16 &= ~(SYSTEM_ERROR_INTR_ON_MESG_MASK);
- pci_write_config_word(pdev, pos + PCI_EXP_RTCTL, reg16);
+ pci_pcie_capability_write_word(pdev, PCI_EXP_RTCTL, reg16);
aer_pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_ERR);
/* Clear error status */
@@ -396,9 +395,8 @@ static void aer_error_resume(struct pci_dev *dev)
u16 reg16;
/* Clean up Root device status */
- pos = pci_pcie_cap(dev);
- pci_read_config_word(dev, pos + PCI_EXP_DEVSTA, ®16);
- pci_write_config_word(dev, pos + PCI_EXP_DEVSTA, reg16);
+ pci_pcie_capability_read_word(dev, PCI_EXP_DEVSTA, ®16);
+ pci_pcie_capability_write_word(dev, PCI_EXP_DEVSTA, reg16);
/* Clean AER Root Error Status */
pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c
index f551534..a37e277 100644
--- a/drivers/pci/pcie/aer/aerdrv_core.c
+++ b/drivers/pci/pcie/aer/aerdrv_core.c
@@ -35,25 +35,22 @@ module_param(nosourceid, bool, 0);
int pci_enable_pcie_error_reporting(struct pci_dev *dev)
{
u16 reg16 = 0;
- int pos;
if (pcie_aer_get_firmware_first(dev))
return -EIO;
- pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
- if (!pos)
+ if (!pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR))
return -EIO;
- pos = pci_pcie_cap(dev);
- if (!pos)
+ if (!pci_is_pcie(dev))
return -EIO;
- pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, ®16);
+ pci_pcie_capability_read_word(dev, PCI_EXP_DEVCTL, ®16);
reg16 |= (PCI_EXP_DEVCTL_CERE |
PCI_EXP_DEVCTL_NFERE |
PCI_EXP_DEVCTL_FERE |
PCI_EXP_DEVCTL_URRE);
- pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, reg16);
+ pci_pcie_capability_write_word(dev, PCI_EXP_DEVCTL, reg16);
return 0;
}
@@ -62,21 +59,19 @@ EXPORT_SYMBOL_GPL(pci_enable_pcie_error_reporting);
int pci_disable_pcie_error_reporting(struct pci_dev *dev)
{
u16 reg16 = 0;
- int pos;
if (pcie_aer_get_firmware_first(dev))
return -EIO;
- pos = pci_pcie_cap(dev);
- if (!pos)
+ if (!pci_is_pcie(dev))
return -EIO;
- pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, ®16);
+ pci_pcie_capability_read_word(dev, PCI_EXP_DEVCTL, ®16);
reg16 &= ~(PCI_EXP_DEVCTL_CERE |
PCI_EXP_DEVCTL_NFERE |
PCI_EXP_DEVCTL_FERE |
PCI_EXP_DEVCTL_URRE);
- pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, reg16);
+ pci_pcie_capability_write_word(dev, PCI_EXP_DEVCTL, reg16);
return 0;
}
@@ -151,18 +146,18 @@ static bool is_error_source(struct pci_dev *dev, struct aer_err_info *e_info)
*/
if (atomic_read(&dev->enable_cnt) == 0)
return false;
- pos = pci_pcie_cap(dev);
- if (!pos)
+ if (!pci_is_pcie(dev))
return false;
/* Check if AER is enabled */
- pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, ®16);
+ pci_pcie_capability_read_word(dev, PCI_EXP_DEVCTL, ®16);
if (!(reg16 & (
PCI_EXP_DEVCTL_CERE |
PCI_EXP_DEVCTL_NFERE |
PCI_EXP_DEVCTL_FERE |
PCI_EXP_DEVCTL_URRE)))
return false;
+
pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
if (!pos)
return false;
--
1.7.9.5
next prev parent reply other threads:[~2012-07-24 16:31 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-24 16:31 [RFC PATCH v2 00/32] provide interfaces to access PCIe capabilities registers Jiang Liu
2012-07-24 16:31 ` [RFC PATCH v2 01/32] PCI: add pcie_flags_reg into struct pci_dev to cache PCIe capabilities register Jiang Liu
2012-07-25 15:12 ` Don Dutile
2012-07-26 13:47 ` Yijing Wang
2012-07-24 16:31 ` [RFC PATCH v2 02/32] PCI: introduce pci_pcie_type(dev) to replace pci_dev->pcie_type Jiang Liu
2012-07-24 16:31 ` [RFC PATCH v2 03/32] PCI: remove unused field pcie_type from struct pci_dev Jiang Liu
2012-07-24 16:31 ` [RFC PATCH v2 04/32] PCI: add PCIe capabilities access functions to hide differences among PCIe specs Jiang Liu
2012-07-24 21:12 ` Don Dutile
2012-07-29 16:22 ` Jiang Liu
2012-07-24 16:31 ` [RFC PATCH v2 05/32] PCI/core: use PCIe capabilities access functions to simplify implementation Jiang Liu
2012-07-25 21:12 ` Don Dutile
2012-07-29 2:12 ` Jiang Liu
2012-07-24 16:31 ` [RFC PATCH v2 06/32] PCI/hotplug: " Jiang Liu
2012-07-24 16:31 ` [RFC PATCH v2 07/32] PCI/portdrv: " Jiang Liu
2012-07-25 5:51 ` Kaneshige, Kenji
2012-07-25 9:44 ` Jiang Liu
2012-07-24 16:31 ` [RFC PATCH v2 08/32] PCI/pciehp: " Jiang Liu
2012-07-24 16:31 ` [RFC PATCH v2 09/32] PCI/PME: " Jiang Liu
2012-07-24 16:31 ` Jiang Liu [this message]
2012-07-24 16:31 ` [RFC PATCH v2 11/32] PCI/ASPM: " Jiang Liu
2012-07-24 16:31 ` [RFC PATCH v2 12/32] PCI/ARM: " Jiang Liu
2012-07-24 16:31 ` [RFC PATCH v2 13/32] PCI/MIPS: " Jiang Liu
2012-07-24 16:31 ` [RFC PATCH v2 14/32] PCI/tile: " Jiang Liu
2012-07-24 16:31 ` [RFC PATCH v2 15/32] PCI/r8169: " Jiang Liu
2012-07-24 16:31 ` [RFC PATCH v2 16/32] PCI/broadcom: " Jiang Liu
2012-07-24 16:31 ` [RFC PATCH v2 17/32] PCI/igb: " Jiang Liu
2012-07-24 16:31 ` [RFC PATCH v2 18/32] PCI/vxge: " Jiang Liu
2012-07-24 16:31 ` [RFC PATCH v2 19/32] PCI/mlx4: " Jiang Liu
2012-07-24 16:31 ` [RFC PATCH v2 20/32] PCI/niu: " Jiang Liu
2012-07-24 16:31 ` [RFC PATCH v2 21/32] PCI/myri10ge: " Jiang Liu
2012-07-24 16:31 ` [RFC PATCH v2 22/32] PCI/chelsio: " Jiang Liu
2012-07-24 16:31 ` [RFC PATCH v2 23/32] PCI/atl1c: " Jiang Liu
2012-07-24 21:09 ` [RFC PATCH v2 00/32] provide interfaces to access PCIe capabilities registers Don Dutile
2012-07-29 2:26 ` Jiang Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1343147504-25891-11-git-send-email-jiang.liu@huawei.com \
--to=liuj97@gmail.com \
--cc=bhelgaas@google.com \
--cc=ddutile@redhat.com \
--cc=izumi.taku@jp.fujitsu.com \
--cc=jiang.liu@huawei.com \
--cc=kaneshige.kenji@jp.fujitsu.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=rjw@sisk.pl \
--cc=wangyijing@huawei.com \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).