From: Jiang Liu <liuj97@gmail.com>
To: Bjorn Helgaas <bhelgaas@google.com>, Don Dutile <ddutile@redhat.com>
Cc: Jiang Liu <jiang.liu@huawei.com>, Yinghai Lu <yinghai@kernel.org>,
Taku Izumi <izumi.taku@jp.fujitsu.com>,
"Rafael J . Wysocki" <rjw@sisk.pl>,
Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>,
Yijing Wang <wangyijing@huawei.com>,
linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org,
Jiang Liu <liuj97@gmail.com>
Subject: [RFC PATCH v2 27/32] PCI/qib: use PCIe capabilities access functions to simplify implementation
Date: Wed, 25 Jul 2012 00:41:12 +0800 [thread overview]
Message-ID: <1343148077-25941-4-git-send-email-jiang.liu@huawei.com> (raw)
In-Reply-To: <1343148077-25941-1-git-send-email-jiang.liu@huawei.com>
From: Jiang Liu <jiang.liu@huawei.com>
Use PCIe capabilities access functions to simplify qib driver's implementation.
Signed-off-by: Jiang Liu <liuj97@gmail.com>
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
drivers/infiniband/hw/qib/qib_pcie.c | 40 +++++++++++++++-------------------
1 file changed, 17 insertions(+), 23 deletions(-)
diff --git a/drivers/infiniband/hw/qib/qib_pcie.c b/drivers/infiniband/hw/qib/qib_pcie.c
index 790646e..9a5cb02 100644
--- a/drivers/infiniband/hw/qib/qib_pcie.c
+++ b/drivers/infiniband/hw/qib/qib_pcie.c
@@ -271,10 +271,9 @@ int qib_pcie_params(struct qib_devdata *dd, u32 minw, u32 *nent,
struct qib_msix_entry *entry)
{
u16 linkstat, speed;
- int pos = 0, pose, ret = 1;
+ int pos = 0, ret = 1;
- pose = pci_pcie_cap(dd->pcidev);
- if (!pose) {
+ if (!pci_is_pcie(dd->pcidev)) {
qib_dev_err(dd, "Can't find PCI Express capability!\n");
/* set up something... */
dd->lbus_width = 1;
@@ -296,7 +295,7 @@ int qib_pcie_params(struct qib_devdata *dd, u32 minw, u32 *nent,
if (!pos)
qib_enable_intx(dd->pcidev);
- pci_read_config_word(dd->pcidev, pose + PCI_EXP_LNKSTA, &linkstat);
+ pci_pcie_capability_read_word(dd->pcidev, PCI_EXP_LNKSTA, &linkstat);
/*
* speed is bits 0-3, linkwidth is bits 4-8
* no defines for them in headers
@@ -514,7 +513,6 @@ static int qib_tune_pcie_coalesce(struct qib_devdata *dd)
{
int r;
struct pci_dev *parent;
- int ppos;
u16 devid;
u32 mask, bits, val;
@@ -527,8 +525,7 @@ static int qib_tune_pcie_coalesce(struct qib_devdata *dd)
qib_devinfo(dd->pcidev, "Parent not root\n");
return 1;
}
- ppos = pci_pcie_cap(parent);
- if (!ppos)
+ if (!pci_is_pcie(parent))
return 1;
if (parent->vendor != 0x8086)
return 1;
@@ -585,7 +582,6 @@ static int qib_tune_pcie_caps(struct qib_devdata *dd)
{
int ret = 1; /* Assume the worst */
struct pci_dev *parent;
- int ppos, epos;
u16 pcaps, pctl, ecaps, ectl;
int rc_sup, ep_sup;
int rc_cur, ep_cur;
@@ -596,19 +592,15 @@ static int qib_tune_pcie_caps(struct qib_devdata *dd)
qib_devinfo(dd->pcidev, "Parent not root\n");
goto bail;
}
- ppos = pci_pcie_cap(parent);
- if (ppos) {
- pci_read_config_word(parent, ppos + PCI_EXP_DEVCAP, &pcaps);
- pci_read_config_word(parent, ppos + PCI_EXP_DEVCTL, &pctl);
- } else
+
+ if (!pci_is_pcie(parent) || !pci_is_pcie(dd->pcidev))
goto bail;
+ pci_pcie_capability_read_word(parent, PCI_EXP_DEVCAP, &pcaps);
+ pci_pcie_capability_read_word(parent, PCI_EXP_DEVCTL, &pctl);
/* Find out supported and configured values for endpoint (us) */
- epos = pci_pcie_cap(dd->pcidev);
- if (epos) {
- pci_read_config_word(dd->pcidev, epos + PCI_EXP_DEVCAP, &ecaps);
- pci_read_config_word(dd->pcidev, epos + PCI_EXP_DEVCTL, &ectl);
- } else
- goto bail;
+ pci_pcie_capability_read_word(dd->pcidev, PCI_EXP_DEVCAP, &ecaps);
+ pci_pcie_capability_read_word(dd->pcidev, PCI_EXP_DEVCTL, &ectl);
+
ret = 0;
/* Find max payload supported by root, endpoint */
rc_sup = fld2val(pcaps, PCI_EXP_DEVCAP_PAYLOAD);
@@ -627,14 +619,15 @@ static int qib_tune_pcie_caps(struct qib_devdata *dd)
rc_cur = rc_sup;
pctl = (pctl & ~PCI_EXP_DEVCTL_PAYLOAD) |
val2fld(rc_cur, PCI_EXP_DEVCTL_PAYLOAD);
- pci_write_config_word(parent, ppos + PCI_EXP_DEVCTL, pctl);
+ pci_pcie_capability_write_word(parent, PCI_EXP_DEVCTL, pctl);
}
/* If less than (allowed, supported), bump endpoint payload */
if (rc_sup > ep_cur) {
ep_cur = rc_sup;
ectl = (ectl & ~PCI_EXP_DEVCTL_PAYLOAD) |
val2fld(ep_cur, PCI_EXP_DEVCTL_PAYLOAD);
- pci_write_config_word(dd->pcidev, epos + PCI_EXP_DEVCTL, ectl);
+ pci_pcie_capability_write_word(dd->pcidev,
+ PCI_EXP_DEVCTL, ectl);
}
/*
@@ -652,13 +645,14 @@ static int qib_tune_pcie_caps(struct qib_devdata *dd)
rc_cur = rc_sup;
pctl = (pctl & ~PCI_EXP_DEVCTL_READRQ) |
val2fld(rc_cur, PCI_EXP_DEVCTL_READRQ);
- pci_write_config_word(parent, ppos + PCI_EXP_DEVCTL, pctl);
+ pci_pcie_capability_write_word(parent, PCI_EXP_DEVCTL, pctl);
}
if (rc_sup > ep_cur) {
ep_cur = rc_sup;
ectl = (ectl & ~PCI_EXP_DEVCTL_READRQ) |
val2fld(ep_cur, PCI_EXP_DEVCTL_READRQ);
- pci_write_config_word(dd->pcidev, epos + PCI_EXP_DEVCTL, ectl);
+ pci_pcie_capability_write_word(dd->pcidev,
+ PCI_EXP_DEVCTL, ectl);
}
bail:
return ret;
--
1.7.9.5
next prev parent reply other threads:[~2012-07-24 16:41 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-24 16:41 [RFC PATCH v2 24/32] PCI/ath9k: use PCIe capabilities access functions to simplify implementation Jiang Liu
2012-07-24 16:41 ` [RFC PATCH v2 25/32] PCI/iwl: " Jiang Liu
2012-07-24 16:41 ` [RFC PATCH v2 26/32] PCI/mthca: " Jiang Liu
2012-07-24 16:41 ` Jiang Liu [this message]
2012-07-24 16:41 ` [RFC PATCH v2 28/32] PCI/qla: " Jiang Liu
2012-07-24 16:41 ` [RFC PATCH v2 29/32] PCI/radeon: " Jiang Liu
2012-07-24 16:41 ` [RFC PATCH v2 30/32] PCI/tsi721: " Jiang Liu
2012-07-24 16:41 ` [RFC PATCH v2 31/32] PCI/et131x: " Jiang Liu
2012-07-24 16:41 ` [RFC PATCH v2 32/32] PCI/rtl8192e: " Jiang Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1343148077-25941-4-git-send-email-jiang.liu@huawei.com \
--to=liuj97@gmail.com \
--cc=bhelgaas@google.com \
--cc=ddutile@redhat.com \
--cc=izumi.taku@jp.fujitsu.com \
--cc=jiang.liu@huawei.com \
--cc=kaneshige.kenji@jp.fujitsu.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=rjw@sisk.pl \
--cc=wangyijing@huawei.com \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).