[RFC PATCH v2 30/32] PCI/tsi721: use PCIe capabilities access functions to simplify implementation

[Jiang Liu <liuj97@gmail.com>]

From: Jiang Liu <jiang.liu@huawei.com>

Use PCIe capabilities access functions to simplify tsi721 driver's
implementation.

Signed-off-by: Jiang Liu <liuj97@gmail.com>
---
 drivers/rapidio/devices/tsi721.c |   13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/rapidio/devices/tsi721.c b/drivers/rapidio/devices/tsi721.c
index 722246c..4debfdc 100644
--- a/drivers/rapidio/devices/tsi721.c
+++ b/drivers/rapidio/devices/tsi721.c
@@ -2212,7 +2212,7 @@ static int __devinit tsi721_probe(struct pci_dev *pdev,
 				  const struct pci_device_id *id)
 {
 	struct tsi721_device *priv;
-	int i, cap;
+	int i;
 	int err;
 	u32 regval;
 
@@ -2320,20 +2320,19 @@ static int __devinit tsi721_probe(struct pci_dev *pdev,
 			dev_info(&pdev->dev, "Unable to set consistent DMA mask\n");
 	}
 
-	cap = pci_pcie_cap(pdev);
-	BUG_ON(cap == 0);
+	BUG_ON(!pci_is_pcie(pdev));
 
 	/* Clear "no snoop" and "relaxed ordering" bits, use default MRRS. */
-	pci_read_config_dword(pdev, cap + PCI_EXP_DEVCTL, &regval);
+	pci_pcie_capability_read_dword(pdev, PCI_EXP_DEVCTL, &regval);
 	regval &= ~(PCI_EXP_DEVCTL_READRQ | PCI_EXP_DEVCTL_RELAX_EN |
 		    PCI_EXP_DEVCTL_NOSNOOP_EN);
 	regval |= 0x2 << MAX_READ_REQUEST_SZ_SHIFT;
-	pci_write_config_dword(pdev, cap + PCI_EXP_DEVCTL, regval);
+	pci_pcie_capability_write_dword(pdev, PCI_EXP_DEVCTL, regval);
 
 	/* Adjust PCIe completion timeout. */
-	pci_read_config_dword(pdev, cap + PCI_EXP_DEVCTL2, &regval);
+	pci_pcie_capability_read_dword(pdev, PCI_EXP_DEVCTL2, &regval);
 	regval &= ~(0x0f);
-	pci_write_config_dword(pdev, cap + PCI_EXP_DEVCTL2, regval | 0x2);
+	pci_pcie_capability_write_dword(pdev, PCI_EXP_DEVCTL2, regval | 0x2);
 
 	/*
 	 * FIXUP: correct offsets of MSI-X tables in the MSI-X Capability Block
-- 
1.7.9.5