From: Jiang Liu <liuj97@gmail.com>
To: Bjorn Helgaas <bhelgaas@google.com>, Don Dutile <ddutile@redhat.com>
Cc: Jiang Liu <jiang.liu@huawei.com>, Yinghai Lu <yinghai@kernel.org>,
Taku Izumi <izumi.taku@jp.fujitsu.com>,
"Rafael J . Wysocki" <rjw@sisk.pl>,
Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>,
Yijing Wang <wangyijing@huawei.com>,
linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org,
Jiang Liu <liuj97@gmail.com>
Subject: [PATCH v3 09/32] PCI/PME: use PCIe capabilities access functions to simplify implementation
Date: Wed, 1 Aug 2012 23:54:14 +0800 [thread overview]
Message-ID: <1343836477-7287-10-git-send-email-jiang.liu@huawei.com> (raw)
In-Reply-To: <1343836477-7287-1-git-send-email-jiang.liu@huawei.com>
From: Jiang Liu <jiang.liu@huawei.com>
Use PCIe capabilities access functions to simplify PCIe PME implementation.
Signed-off-by: Jiang Liu <liuj97@gmail.com>
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
drivers/pci/pcie/pme.c | 22 ++++++----------------
1 file changed, 6 insertions(+), 16 deletions(-)
diff --git a/drivers/pci/pcie/pme.c b/drivers/pci/pcie/pme.c
index 30897bf..74a3d4d 100644
--- a/drivers/pci/pcie/pme.c
+++ b/drivers/pci/pcie/pme.c
@@ -57,17 +57,13 @@ struct pcie_pme_service_data {
*/
void pcie_pme_interrupt_enable(struct pci_dev *dev, bool enable)
{
- int rtctl_pos;
- u16 rtctl;
+ u16 set = 0, clr = 0;
- rtctl_pos = pci_pcie_cap(dev) + PCI_EXP_RTCTL;
-
- pci_read_config_word(dev, rtctl_pos, &rtctl);
if (enable)
- rtctl |= PCI_EXP_RTCTL_PMEIE;
+ set = PCI_EXP_RTCTL_PMEIE;
else
- rtctl &= ~PCI_EXP_RTCTL_PMEIE;
- pci_write_config_word(dev, rtctl_pos, rtctl);
+ clr = PCI_EXP_RTCTL_PMEIE;
+ pci_pcie_capability_change_word(dev, PCI_EXP_RTCTL, set, clr);
}
/**
@@ -226,18 +222,15 @@ static void pcie_pme_work_fn(struct work_struct *work)
struct pcie_pme_service_data *data =
container_of(work, struct pcie_pme_service_data, work);
struct pci_dev *port = data->srv->port;
- int rtsta_pos;
u32 rtsta;
- rtsta_pos = pci_pcie_cap(port) + PCI_EXP_RTSTA;
-
spin_lock_irq(&data->lock);
for (;;) {
if (data->noirq)
break;
- pci_read_config_dword(port, rtsta_pos, &rtsta);
+ pci_pcie_capability_read_dword(port, PCI_EXP_RTSTA, &rtsta);
if (rtsta & PCI_EXP_RTSTA_PME) {
/*
* Clear PME status of the port. If there are other
@@ -276,17 +269,14 @@ static irqreturn_t pcie_pme_irq(int irq, void *context)
{
struct pci_dev *port;
struct pcie_pme_service_data *data;
- int rtsta_pos;
u32 rtsta;
unsigned long flags;
port = ((struct pcie_device *)context)->port;
data = get_service_data((struct pcie_device *)context);
- rtsta_pos = pci_pcie_cap(port) + PCI_EXP_RTSTA;
-
spin_lock_irqsave(&data->lock, flags);
- pci_read_config_dword(port, rtsta_pos, &rtsta);
+ pci_pcie_capability_read_dword(port, PCI_EXP_RTSTA, &rtsta);
if (!(rtsta & PCI_EXP_RTSTA_PME)) {
spin_unlock_irqrestore(&data->lock, flags);
--
1.7.9.5
next prev parent reply other threads:[~2012-08-01 15:54 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-01 15:54 [PATCH v3 00/32] provide interfaces to access PCIe capabilities registers Jiang Liu
2012-08-01 15:54 ` [PATCH v3 01/32] PCI: add pcie_flags_reg into struct pci_dev to cache PCIe capabilities register Jiang Liu
2012-08-01 15:54 ` [PATCH v3 02/32] PCI: introduce pci_pcie_type(dev) to replace pci_dev->pcie_type Jiang Liu
2012-08-01 15:54 ` [PATCH v3 03/32] PCI: remove unused field pcie_type from struct pci_dev Jiang Liu
2012-08-01 15:54 ` [PATCH v3 04/32] PCI: add PCIe capabilities access functions to hide differences among PCIe specs Jiang Liu
2012-08-01 15:54 ` [PATCH v3 05/32] PCI/core: use PCIe capabilities access functions to simplify implementation Jiang Liu
2012-08-01 15:54 ` [PATCH v3 06/32] PCI/hotplug: " Jiang Liu
2012-08-02 1:30 ` Kaneshige, Kenji
2012-08-01 15:54 ` [PATCH v3 07/32] PCI/portdrv: " Jiang Liu
2012-08-02 1:33 ` Kaneshige, Kenji
2012-08-01 15:54 ` [PATCH v3 08/32] PCI/pciehp: " Jiang Liu
2012-08-02 1:37 ` Kaneshige, Kenji
2012-08-01 15:54 ` Jiang Liu [this message]
2012-08-01 15:54 ` [PATCH v3 10/32] PCI/AER: " Jiang Liu
2012-08-01 15:54 ` [PATCH v3 11/32] PCI/ASPM: " Jiang Liu
2012-08-01 15:54 ` [PATCH v3 12/32] PCI/ARM: " Jiang Liu
2012-08-01 17:20 ` Stephen Warren
2012-08-02 5:58 ` Thierry Reding
2012-08-03 18:05 ` Stephen Warren
2012-08-01 15:54 ` [PATCH v3 13/32] PCI/MIPS: " Jiang Liu
2012-08-13 21:40 ` David Daney
2012-08-01 15:54 ` [PATCH v3 14/32] PCI/tile: " Jiang Liu
2012-08-01 21:07 ` Chris Metcalf
2012-08-01 15:54 ` [PATCH v3 15/32] PCI/r8169: " Jiang Liu
2012-08-01 15:54 ` [PATCH v3 16/32] PCI/broadcom: " Jiang Liu
2012-08-01 15:54 ` [PATCH v3 17/32] PCI/igb: " Jiang Liu
2012-08-02 22:12 ` Jeff Kirsher
2012-08-01 15:54 ` [PATCH v3 18/32] PCI/vxge: " Jiang Liu
2012-08-01 15:54 ` [PATCH v3 19/32] PCI/mlx4: " Jiang Liu
2012-08-01 15:54 ` [PATCH v3 20/32] PCI/niu: " Jiang Liu
2012-08-01 15:54 ` [PATCH v3 21/32] PCI/myri10ge: " Jiang Liu
2012-08-01 15:54 ` [PATCH v3 22/32] PCI/chelsio: " Jiang Liu
2012-08-01 15:54 ` [PATCH v3 23/32] PCI/atl1c: " Jiang Liu
2012-08-01 15:54 ` [PATCH v3 24/32] PCI/ath9k: " Jiang Liu
2012-08-01 15:54 ` [PATCH v3 25/32] PCI/iwl: " Jiang Liu
2012-08-01 15:54 ` [PATCH v3 26/32] PCI/mthca: " Jiang Liu
2012-08-02 21:46 ` Roland Dreier
2012-08-01 15:54 ` [PATCH v3 27/32] PCI/qib: " Jiang Liu
2012-08-01 17:30 ` Marciniszyn, Mike
2012-08-01 15:54 ` [PATCH v3 28/32] PCI/qla: " Jiang Liu
2012-08-01 15:54 ` [PATCH v3 29/32] PCI/radeon: " Jiang Liu
2012-08-01 16:04 ` Deucher, Alexander
2012-08-01 15:54 ` [PATCH v3 30/32] PCI/tsi721: " Jiang Liu
2012-08-09 14:16 ` Bounine, Alexandre
2012-08-01 15:54 ` [PATCH v3 31/32] PCI/et131x: " Jiang Liu
2012-08-01 15:54 ` [PATCH v3 32/32] PCI/rtl8192e: " Jiang Liu
2012-08-14 4:25 ` [PATCH v3 00/32] provide interfaces to access PCIe capabilities registers Bjorn Helgaas
2012-08-14 15:46 ` Jiang Liu
2012-08-20 15:26 ` Jiang Liu
2012-08-20 15:35 ` Bjorn Helgaas
2012-08-20 15:47 ` Jiang Liu
2012-08-20 16:10 ` Bjorn Helgaas
2012-08-20 22:13 ` Bjorn Helgaas
2012-08-21 4:40 ` Cui, Dexuan
2012-08-22 16:28 ` Bjorn Helgaas
2012-08-23 1:00 ` Cui, Dexuan
2012-08-23 1:51 ` Don Dutile
2012-08-21 15:59 ` Jiang Liu
2012-08-22 17:08 ` Bjorn Helgaas
2012-08-24 18:52 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1343836477-7287-10-git-send-email-jiang.liu@huawei.com \
--to=liuj97@gmail.com \
--cc=bhelgaas@google.com \
--cc=ddutile@redhat.com \
--cc=izumi.taku@jp.fujitsu.com \
--cc=jiang.liu@huawei.com \
--cc=kaneshige.kenji@jp.fujitsu.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=rjw@sisk.pl \
--cc=wangyijing@huawei.com \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).