linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jiang Liu <liuj97@gmail.com>
To: Bjorn Helgaas <bhelgaas@google.com>,
	Don Dutile <ddutile@redhat.com>,
	Mike Marciniszyn <infinipath@intel.com>
Cc: Jiang Liu <jiang.liu@huawei.com>, Yinghai Lu <yinghai@kernel.org>,
	Taku Izumi <izumi.taku@jp.fujitsu.com>,
	"Rafael J . Wysocki" <rjw@sisk.pl>,
	Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>,
	Yijing Wang <wangyijing@huawei.com>,
	linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org,
	Jiang Liu <liuj97@gmail.com>
Subject: [PATCH v3 27/32] PCI/qib: use PCIe capabilities access functions to simplify implementation
Date: Wed,  1 Aug 2012 23:54:32 +0800	[thread overview]
Message-ID: <1343836477-7287-28-git-send-email-jiang.liu@huawei.com> (raw)
In-Reply-To: <1343836477-7287-1-git-send-email-jiang.liu@huawei.com>

From: Jiang Liu <jiang.liu@huawei.com>

Use PCIe capabilities access functions to simplify qib driver's implementation.

Signed-off-by: Jiang Liu <liuj97@gmail.com>
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 drivers/infiniband/hw/qib/qib_pcie.c |   40 +++++++++++++++-------------------
 1 file changed, 17 insertions(+), 23 deletions(-)

diff --git a/drivers/infiniband/hw/qib/qib_pcie.c b/drivers/infiniband/hw/qib/qib_pcie.c
index 790646e..9a5cb02 100644
--- a/drivers/infiniband/hw/qib/qib_pcie.c
+++ b/drivers/infiniband/hw/qib/qib_pcie.c
@@ -271,10 +271,9 @@ int qib_pcie_params(struct qib_devdata *dd, u32 minw, u32 *nent,
 		    struct qib_msix_entry *entry)
 {
 	u16 linkstat, speed;
-	int pos = 0, pose, ret = 1;
+	int pos = 0, ret = 1;
 
-	pose = pci_pcie_cap(dd->pcidev);
-	if (!pose) {
+	if (!pci_is_pcie(dd->pcidev)) {
 		qib_dev_err(dd, "Can't find PCI Express capability!\n");
 		/* set up something... */
 		dd->lbus_width = 1;
@@ -296,7 +295,7 @@ int qib_pcie_params(struct qib_devdata *dd, u32 minw, u32 *nent,
 	if (!pos)
 		qib_enable_intx(dd->pcidev);
 
-	pci_read_config_word(dd->pcidev, pose + PCI_EXP_LNKSTA, &linkstat);
+	pci_pcie_capability_read_word(dd->pcidev, PCI_EXP_LNKSTA, &linkstat);
 	/*
 	 * speed is bits 0-3, linkwidth is bits 4-8
 	 * no defines for them in headers
@@ -514,7 +513,6 @@ static int qib_tune_pcie_coalesce(struct qib_devdata *dd)
 {
 	int r;
 	struct pci_dev *parent;
-	int ppos;
 	u16 devid;
 	u32 mask, bits, val;
 
@@ -527,8 +525,7 @@ static int qib_tune_pcie_coalesce(struct qib_devdata *dd)
 		qib_devinfo(dd->pcidev, "Parent not root\n");
 		return 1;
 	}
-	ppos = pci_pcie_cap(parent);
-	if (!ppos)
+	if (!pci_is_pcie(parent))
 		return 1;
 	if (parent->vendor != 0x8086)
 		return 1;
@@ -585,7 +582,6 @@ static int qib_tune_pcie_caps(struct qib_devdata *dd)
 {
 	int ret = 1; /* Assume the worst */
 	struct pci_dev *parent;
-	int ppos, epos;
 	u16 pcaps, pctl, ecaps, ectl;
 	int rc_sup, ep_sup;
 	int rc_cur, ep_cur;
@@ -596,19 +592,15 @@ static int qib_tune_pcie_caps(struct qib_devdata *dd)
 		qib_devinfo(dd->pcidev, "Parent not root\n");
 		goto bail;
 	}
-	ppos = pci_pcie_cap(parent);
-	if (ppos) {
-		pci_read_config_word(parent, ppos + PCI_EXP_DEVCAP, &pcaps);
-		pci_read_config_word(parent, ppos + PCI_EXP_DEVCTL, &pctl);
-	} else
+
+	if (!pci_is_pcie(parent) || !pci_is_pcie(dd->pcidev))
 		goto bail;
+	pci_pcie_capability_read_word(parent, PCI_EXP_DEVCAP, &pcaps);
+	pci_pcie_capability_read_word(parent, PCI_EXP_DEVCTL, &pctl);
 	/* Find out supported and configured values for endpoint (us) */
-	epos = pci_pcie_cap(dd->pcidev);
-	if (epos) {
-		pci_read_config_word(dd->pcidev, epos + PCI_EXP_DEVCAP, &ecaps);
-		pci_read_config_word(dd->pcidev, epos + PCI_EXP_DEVCTL, &ectl);
-	} else
-		goto bail;
+	pci_pcie_capability_read_word(dd->pcidev, PCI_EXP_DEVCAP, &ecaps);
+	pci_pcie_capability_read_word(dd->pcidev, PCI_EXP_DEVCTL, &ectl);
+
 	ret = 0;
 	/* Find max payload supported by root, endpoint */
 	rc_sup = fld2val(pcaps, PCI_EXP_DEVCAP_PAYLOAD);
@@ -627,14 +619,15 @@ static int qib_tune_pcie_caps(struct qib_devdata *dd)
 		rc_cur = rc_sup;
 		pctl = (pctl & ~PCI_EXP_DEVCTL_PAYLOAD) |
 			val2fld(rc_cur, PCI_EXP_DEVCTL_PAYLOAD);
-		pci_write_config_word(parent, ppos + PCI_EXP_DEVCTL, pctl);
+		pci_pcie_capability_write_word(parent, PCI_EXP_DEVCTL, pctl);
 	}
 	/* If less than (allowed, supported), bump endpoint payload */
 	if (rc_sup > ep_cur) {
 		ep_cur = rc_sup;
 		ectl = (ectl & ~PCI_EXP_DEVCTL_PAYLOAD) |
 			val2fld(ep_cur, PCI_EXP_DEVCTL_PAYLOAD);
-		pci_write_config_word(dd->pcidev, epos + PCI_EXP_DEVCTL, ectl);
+		pci_pcie_capability_write_word(dd->pcidev,
+					       PCI_EXP_DEVCTL, ectl);
 	}
 
 	/*
@@ -652,13 +645,14 @@ static int qib_tune_pcie_caps(struct qib_devdata *dd)
 		rc_cur = rc_sup;
 		pctl = (pctl & ~PCI_EXP_DEVCTL_READRQ) |
 			val2fld(rc_cur, PCI_EXP_DEVCTL_READRQ);
-		pci_write_config_word(parent, ppos + PCI_EXP_DEVCTL, pctl);
+		pci_pcie_capability_write_word(parent, PCI_EXP_DEVCTL, pctl);
 	}
 	if (rc_sup > ep_cur) {
 		ep_cur = rc_sup;
 		ectl = (ectl & ~PCI_EXP_DEVCTL_READRQ) |
 			val2fld(ep_cur, PCI_EXP_DEVCTL_READRQ);
-		pci_write_config_word(dd->pcidev, epos + PCI_EXP_DEVCTL, ectl);
+		pci_pcie_capability_write_word(dd->pcidev,
+					       PCI_EXP_DEVCTL, ectl);
 	}
 bail:
 	return ret;
-- 
1.7.9.5


  parent reply	other threads:[~2012-08-01 15:59 UTC|newest]

Thread overview: 60+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-08-01 15:54 [PATCH v3 00/32] provide interfaces to access PCIe capabilities registers Jiang Liu
2012-08-01 15:54 ` [PATCH v3 01/32] PCI: add pcie_flags_reg into struct pci_dev to cache PCIe capabilities register Jiang Liu
2012-08-01 15:54 ` [PATCH v3 02/32] PCI: introduce pci_pcie_type(dev) to replace pci_dev->pcie_type Jiang Liu
2012-08-01 15:54 ` [PATCH v3 03/32] PCI: remove unused field pcie_type from struct pci_dev Jiang Liu
2012-08-01 15:54 ` [PATCH v3 04/32] PCI: add PCIe capabilities access functions to hide differences among PCIe specs Jiang Liu
2012-08-01 15:54 ` [PATCH v3 05/32] PCI/core: use PCIe capabilities access functions to simplify implementation Jiang Liu
2012-08-01 15:54 ` [PATCH v3 06/32] PCI/hotplug: " Jiang Liu
2012-08-02  1:30   ` Kaneshige, Kenji
2012-08-01 15:54 ` [PATCH v3 07/32] PCI/portdrv: " Jiang Liu
2012-08-02  1:33   ` Kaneshige, Kenji
2012-08-01 15:54 ` [PATCH v3 08/32] PCI/pciehp: " Jiang Liu
2012-08-02  1:37   ` Kaneshige, Kenji
2012-08-01 15:54 ` [PATCH v3 09/32] PCI/PME: " Jiang Liu
2012-08-01 15:54 ` [PATCH v3 10/32] PCI/AER: " Jiang Liu
2012-08-01 15:54 ` [PATCH v3 11/32] PCI/ASPM: " Jiang Liu
2012-08-01 15:54 ` [PATCH v3 12/32] PCI/ARM: " Jiang Liu
2012-08-01 17:20   ` Stephen Warren
2012-08-02  5:58     ` Thierry Reding
2012-08-03 18:05   ` Stephen Warren
2012-08-01 15:54 ` [PATCH v3 13/32] PCI/MIPS: " Jiang Liu
2012-08-13 21:40   ` David Daney
2012-08-01 15:54 ` [PATCH v3 14/32] PCI/tile: " Jiang Liu
2012-08-01 21:07   ` Chris Metcalf
2012-08-01 15:54 ` [PATCH v3 15/32] PCI/r8169: " Jiang Liu
2012-08-01 15:54 ` [PATCH v3 16/32] PCI/broadcom: " Jiang Liu
2012-08-01 15:54 ` [PATCH v3 17/32] PCI/igb: " Jiang Liu
2012-08-02 22:12   ` Jeff Kirsher
2012-08-01 15:54 ` [PATCH v3 18/32] PCI/vxge: " Jiang Liu
2012-08-01 15:54 ` [PATCH v3 19/32] PCI/mlx4: " Jiang Liu
2012-08-01 15:54 ` [PATCH v3 20/32] PCI/niu: " Jiang Liu
2012-08-01 15:54 ` [PATCH v3 21/32] PCI/myri10ge: " Jiang Liu
2012-08-01 15:54 ` [PATCH v3 22/32] PCI/chelsio: " Jiang Liu
2012-08-01 15:54 ` [PATCH v3 23/32] PCI/atl1c: " Jiang Liu
2012-08-01 15:54 ` [PATCH v3 24/32] PCI/ath9k: " Jiang Liu
2012-08-01 15:54 ` [PATCH v3 25/32] PCI/iwl: " Jiang Liu
2012-08-01 15:54 ` [PATCH v3 26/32] PCI/mthca: " Jiang Liu
2012-08-02 21:46   ` Roland Dreier
2012-08-01 15:54 ` Jiang Liu [this message]
2012-08-01 17:30   ` [PATCH v3 27/32] PCI/qib: " Marciniszyn, Mike
2012-08-01 15:54 ` [PATCH v3 28/32] PCI/qla: " Jiang Liu
2012-08-01 15:54 ` [PATCH v3 29/32] PCI/radeon: " Jiang Liu
2012-08-01 16:04   ` Deucher, Alexander
2012-08-01 15:54 ` [PATCH v3 30/32] PCI/tsi721: " Jiang Liu
2012-08-09 14:16   ` Bounine, Alexandre
2012-08-01 15:54 ` [PATCH v3 31/32] PCI/et131x: " Jiang Liu
2012-08-01 15:54 ` [PATCH v3 32/32] PCI/rtl8192e: " Jiang Liu
2012-08-14  4:25 ` [PATCH v3 00/32] provide interfaces to access PCIe capabilities registers Bjorn Helgaas
2012-08-14 15:46   ` Jiang Liu
2012-08-20 15:26   ` Jiang Liu
2012-08-20 15:35     ` Bjorn Helgaas
2012-08-20 15:47       ` Jiang Liu
2012-08-20 16:10         ` Bjorn Helgaas
2012-08-20 22:13           ` Bjorn Helgaas
2012-08-21  4:40             ` Cui, Dexuan
2012-08-22 16:28               ` Bjorn Helgaas
2012-08-23  1:00                 ` Cui, Dexuan
2012-08-23  1:51                 ` Don Dutile
2012-08-21 15:59             ` Jiang Liu
2012-08-22 17:08               ` Bjorn Helgaas
2012-08-24 18:52     ` Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1343836477-7287-28-git-send-email-jiang.liu@huawei.com \
    --to=liuj97@gmail.com \
    --cc=bhelgaas@google.com \
    --cc=ddutile@redhat.com \
    --cc=infinipath@intel.com \
    --cc=izumi.taku@jp.fujitsu.com \
    --cc=jiang.liu@huawei.com \
    --cc=kaneshige.kenji@jp.fujitsu.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=rjw@sisk.pl \
    --cc=wangyijing@huawei.com \
    --cc=yinghai@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).