From: Yinghai Lu <yinghai@kernel.org>
To: Bjorn Helgaas <bhelgaas@google.com>, Len Brown <lenb@kernel.org>,
Taku Izumi <izumi.taku@jp.fujitsu.com>,
Jiang Liu <jiang.liu@huawei.com>, x86 <x86@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>,
Linus Torvalds <torvalds@linux-foundation.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-acpi@vger.kernel.org, Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH 16/40] PCI: pci_bus_size_bridges() should not size own bridge
Date: Wed, 19 Sep 2012 11:54:30 -0700 [thread overview]
Message-ID: <1348080894-23412-17-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1348080894-23412-1-git-send-email-yinghai@kernel.org>
During checking acpiphp code, found following sequence:
pci_bus_size_bridges(bus);
pci_bus_assign_resources(bus);
pci_enable_bridges(bus);
The problem is that when bus is not root bus, pci_bus_size_bridges would also size
own pci bridge bus->self if that bridge resource is not inserted before.
but later pci_bus_assign_resources will not allocate those size bridge res.
So try make it less confusing, let it does not include self sizing.
and add with_self parameter info __pci_bus_size_bridge()
Fixes caller in pci hotplug componets.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
drivers/pci/hotplug/acpiphp_glue.c | 3 ++-
drivers/pci/setup-bus.c | 24 +++++++++++++++---------
include/linux/pci.h | 1 +
3 files changed, 18 insertions(+), 10 deletions(-)
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 085eec7..6cb1923 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -842,7 +842,8 @@ static int __ref enable_device(struct acpiphp_slot *slot)
max = pci_scan_bridge(bus, dev, max, pass);
if (pass && dev->subordinate) {
check_hotplug_bridge(slot, dev);
- pci_bus_size_bridges(dev->subordinate);
+ pci_bus_size_bridges_with_self(
+ dev->subordinate);
}
}
}
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 31821d4..85f7ec73 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -1044,8 +1044,8 @@ handle_done:
;
}
-void __ref __pci_bus_size_bridges(struct pci_bus *bus,
- struct list_head *realloc_head)
+static void __ref __pci_bus_size_bridges(struct pci_bus *bus,
+ struct list_head *realloc_head, bool with_self)
{
struct pci_dev *dev;
unsigned long mask, prefmask;
@@ -1063,13 +1063,13 @@ void __ref __pci_bus_size_bridges(struct pci_bus *bus,
case PCI_CLASS_BRIDGE_PCI:
default:
- __pci_bus_size_bridges(b, realloc_head);
+ __pci_bus_size_bridges(b, realloc_head, true);
break;
}
}
- /* The root bus? */
- if (!bus->self)
+ /* Is root bus or not wanted? */
+ if (!bus->self || !with_self)
return;
switch (bus->self->class >> 8) {
@@ -1109,9 +1109,15 @@ void __ref __pci_bus_size_bridges(struct pci_bus *bus,
}
}
+void __ref pci_bus_size_bridges_with_self(struct pci_bus *bus)
+{
+ __pci_bus_size_bridges(bus, NULL, true);
+}
+EXPORT_SYMBOL(pci_bus_size_bridges_with_self);
+
void __ref pci_bus_size_bridges(struct pci_bus *bus)
{
- __pci_bus_size_bridges(bus, NULL);
+ __pci_bus_size_bridges(bus, NULL, false);
}
EXPORT_SYMBOL(pci_bus_size_bridges);
@@ -1424,7 +1430,7 @@ again:
/* Depth first, calculate sizes and alignments of all
subordinate buses. */
list_for_each_entry(bus, &pci_root_buses, node)
- __pci_bus_size_bridges(bus, add_list);
+ __pci_bus_size_bridges(bus, add_list, false);
/* Depth last, allocate resources and update the hardware. */
list_for_each_entry(bus, &pci_root_buses, node)
@@ -1501,7 +1507,7 @@ void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge)
IORESOURCE_PREFETCH;
again:
- __pci_bus_size_bridges(parent, &add_list);
+ __pci_bus_size_bridges(parent, &add_list, true);
__pci_bridge_assign_resources(bridge, &add_list, &fail_head);
BUG_ON(!list_empty(&add_list));
tried_times++;
@@ -1562,7 +1568,7 @@ void pci_assign_unassigned_bus_resources(struct pci_bus *bus)
dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)
if (dev->subordinate)
__pci_bus_size_bridges(dev->subordinate,
- &add_list);
+ &add_list, true);
up_read(&pci_bus_sem);
__pci_bus_assign_resources(bus, &add_list, NULL);
BUG_ON(!list_empty(&add_list));
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 02b8e10..7404077 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -978,6 +978,7 @@ int pci_vpd_truncate(struct pci_dev *dev, size_t size);
resource_size_t pcibios_retrieve_fw_addr(struct pci_dev *dev, int idx);
void pci_bus_assign_resources(const struct pci_bus *bus);
void pci_bus_size_bridges(struct pci_bus *bus);
+void pci_bus_size_bridges_with_self(struct pci_bus *bus);
int pci_claim_resource(struct pci_dev *, int);
void pci_assign_unassigned_resources(void);
void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge);
--
1.7.7
next prev parent reply other threads:[~2012-09-19 18:54 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-02 21:50 [PATCH part2 0/6] PCI, x86: pci root bus hotplug support - part2 Yinghai Lu
2012-09-02 21:50 ` [PATCH part2 1/6] x86, PCI: Separate pcibios_allocate_bridge_resources() Yinghai Lu
2012-09-02 21:50 ` [PATCH part2 2/6] x86, PCI: Separate pcibios_allocate_dev_resources() Yinghai Lu
2012-09-02 21:50 ` [PATCH part2 3/6] x86, PCI: Let pcibios_allocate_bus_resources() take bus instead Yinghai Lu
2012-09-02 21:50 ` [PATCH part2 4/6] x86, PCI: Separate rom resource claim out Yinghai Lu
2012-09-17 23:38 ` Bjorn Helgaas
2012-09-18 3:18 ` Yinghai Lu
2012-09-02 21:50 ` [PATCH part2 5/6] PCI, x86: Add pcibios_fw_addr_done Yinghai Lu
2012-09-02 21:50 ` [PATCH part2 6/6] PCI: Claim hw/fw allocated resources in hot add path Yinghai Lu
2012-09-18 0:12 ` Bjorn Helgaas
2012-09-18 4:44 ` Yinghai Lu
2012-09-18 5:36 ` Yinghai Lu
2012-09-19 18:54 ` [PATCH 00/40] PCI, ACPI, x86: pci root bus hotplug support Yinghai Lu
2012-09-19 18:54 ` [PATCH 01/40] PCI: fix default vga ref_count Yinghai Lu
2012-09-21 20:52 ` Bjorn Helgaas
2012-09-21 21:18 ` Yinghai Lu
2012-09-23 15:25 ` Jiang Liu
2012-09-19 18:54 ` [PATCH 02/40] PCI, x86: clear initial value for root info resources Yinghai Lu
2012-09-19 18:54 ` [PATCH 03/40] PCI, ia64: " Yinghai Lu
2012-09-19 18:54 ` [PATCH 04/40] PCI, acpiphp: Add is_hotplug_bridge detection Yinghai Lu
2012-09-19 18:54 ` [PATCH 05/40] PCI: Add root bus children dev's res to fail list Yinghai Lu
2012-09-19 18:54 ` [PATCH 06/40] PCI: Split out stop_bus_device and remove_bus_dev again Yinghai Lu
2012-09-19 18:54 ` [PATCH 07/40] x86, PCI: Separate pcibios_allocate_bridge_resources() Yinghai Lu
2012-09-19 18:54 ` [PATCH 08/40] x86, PCI: Separate pcibios_allocate_dev_resources() Yinghai Lu
2012-09-19 18:54 ` [PATCH 09/40] x86, PCI: Let pcibios_allocate_bus_resources() take bus instead Yinghai Lu
2012-09-19 18:54 ` [PATCH 10/40] x86, PCI: Separate rom resource claim out Yinghai Lu
2012-09-19 18:54 ` [PATCH 11/40] PCI, x86: Add pcibios_fw_addr_done Yinghai Lu
2012-09-19 18:54 ` [PATCH 12/40] PCI, x86: Remove __init for hw/fw allocated functions Yinghai Lu
2012-09-19 18:54 ` [PATCH 13/40] PCI: Claim hw/fw allocated resources in hot add path Yinghai Lu
2012-09-19 18:54 ` [PATCH 14/40] PCI: Separate out pci_assign_unassigned_bus_resources() Yinghai Lu
2012-09-19 18:54 ` [PATCH 15/40] PCI: Move back pci_rescan_bus() to probe.c Yinghai Lu
2012-09-19 18:54 ` Yinghai Lu [this message]
2012-09-19 18:54 ` [PATCH 17/40] PCI: Use __pci_bus_size_bridges() directly in pci_assign_unassigned_bus_resources() Yinghai Lu
2012-09-19 18:54 ` [PATCH 18/40] PCI: Rescan bus using callback method too Yinghai Lu
2012-09-19 18:54 ` [PATCH 19/40] PCI, sysfs: Clean up rescan/remove with schedule_callback Yinghai Lu
2012-09-19 18:54 ` [PATCH 20/40] PCI: Fix a device reference count leakage issue in pci_dev_present() Yinghai Lu
2012-09-19 18:54 ` [PATCH 21/40] PCI: Add pci_stop_and_remove_root_bus() Yinghai Lu
2012-09-19 18:54 ` [PATCH 22/40] PCI, acpiphp: Separate out hot-add support of pci host bridge Yinghai Lu
2012-10-12 10:36 ` Tang Chen
2012-09-19 18:54 ` [PATCH 23/40] PCI, ACPI: Pass device instead of handle when config root bridge Yinghai Lu
2012-09-19 18:54 ` [PATCH 24/40] PCI, acpi: Update acpi_pci_driver add/remove interface Yinghai Lu
2012-09-19 18:54 ` [PATCH 25/40] PCI, ACPI: Make acpi_pci_root_remove remove pci root bus too Yinghai Lu
2012-09-19 18:54 ` [PATCH 26/40] PCI, ACPI: del root bus prt Yinghai Lu
2012-09-19 18:54 ` [PATCH 27/40] ACPI: acpi_bus_trim to support two steps Yinghai Lu
2012-09-19 18:54 ` [PATCH 28/40] PCI, ACPI: Add pci_root_hp hot removal notification support Yinghai Lu
2012-09-19 18:54 ` [PATCH 29/40] PCI, ACPI: Add alloc_acpi_hp_work() Yinghai Lu
2012-09-19 18:54 ` [PATCH 30/40] PCI, acpiphp: Use acpi_hp_work Yinghai Lu
2012-09-19 18:54 ` [PATCH 31/40] PCI, pci_root_hp: " Yinghai Lu
2012-09-19 18:54 ` [PATCH 32/40] PCI, ACPI: Make kacpi_hotplug_wq static Yinghai Lu
2012-09-19 18:54 ` [PATCH 33/40] ACPI, PCI: Use normal list for struct acpi_pci_driver Yinghai Lu
2012-09-19 18:54 ` [PATCH 34/40] ACPI, PCI: Notify acpi_pci_drivers when hot-plugging PCI root bridges Yinghai Lu
2012-09-19 18:54 ` [PATCH 35/40] ACPI, PCI: Protect global lists in drivers/acpi/pci_root.c Yinghai Lu
2012-09-19 18:54 ` [PATCH 36/40] PCI: Set dev_node early for pci_dev Yinghai Lu
2012-09-19 18:54 ` [PATCH 37/40] PCI, x86: Move pci_enable_bridges() down Yinghai Lu
2012-09-19 18:54 ` [PATCH 38/40] ACPI, PCI: Skip extra pci_enable_bridges for non hot-add root Yinghai Lu
2012-09-19 18:54 ` [PATCH 39/40] PCI, acpiphp: Don't ailout even no slots found yet Yinghai Lu
2012-09-19 18:54 ` [PATCH 40/40] ACPI: Enable SCI_EMULATE to manually simulate physical hotplug testing Yinghai Lu
2012-10-17 7:50 ` [PATCH 00/40] PCI, ACPI, x86: pci root bus hotplug support Yijing Wang
2012-10-17 16:19 ` Yinghai Lu
2012-10-18 0:51 ` Yijing Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1348080894-23412-17-git-send-email-yinghai@kernel.org \
--to=yinghai@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=bhelgaas@google.com \
--cc=gregkh@linuxfoundation.org \
--cc=izumi.taku@jp.fujitsu.com \
--cc=jiang.liu@huawei.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).