From: Yinghai Lu <yinghai@kernel.org>
To: Bjorn Helgaas <bhelgaas@google.com>, Len Brown <lenb@kernel.org>,
Taku Izumi <izumi.taku@jp.fujitsu.com>,
Jiang Liu <jiang.liu@huawei.com>, x86 <x86@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>,
Linus Torvalds <torvalds@linux-foundation.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-acpi@vger.kernel.org, Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH 39/40] PCI, acpiphp: Don't ailout even no slots found yet.
Date: Wed, 19 Sep 2012 11:54:53 -0700 [thread overview]
Message-ID: <1348080894-23412-40-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1348080894-23412-1-git-send-email-yinghai@kernel.org>
Could have root bus hot add later and there may be slot there that need acpiphp.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
drivers/pci/hotplug/acpiphp.h | 1 -
drivers/pci/hotplug/acpiphp_core.c | 23 ++---------------------
drivers/pci/hotplug/acpiphp_glue.c | 22 ----------------------
3 files changed, 2 insertions(+), 44 deletions(-)
diff --git a/drivers/pci/hotplug/acpiphp.h b/drivers/pci/hotplug/acpiphp.h
index a1afb5b..b3ead7a 100644
--- a/drivers/pci/hotplug/acpiphp.h
+++ b/drivers/pci/hotplug/acpiphp.h
@@ -193,7 +193,6 @@ extern void acpiphp_unregister_hotplug_slot(struct acpiphp_slot *slot);
/* acpiphp_glue.c */
extern int acpiphp_glue_init (void);
extern void acpiphp_glue_exit (void);
-extern int acpiphp_get_num_slots (void);
typedef int (*acpiphp_callback)(struct acpiphp_slot *slot, void *data);
extern int acpiphp_enable_slot (struct acpiphp_slot *slot);
diff --git a/drivers/pci/hotplug/acpiphp_core.c b/drivers/pci/hotplug/acpiphp_core.c
index 96316b7..c2fd309 100644
--- a/drivers/pci/hotplug/acpiphp_core.c
+++ b/drivers/pci/hotplug/acpiphp_core.c
@@ -50,7 +50,6 @@
bool acpiphp_debug;
/* local variables */
-static int num_slots;
static struct acpiphp_attention_info *attention_info;
#define DRIVER_VERSION "0.5"
@@ -272,25 +271,6 @@ static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value)
return 0;
}
-static int __init init_acpi(void)
-{
- int retval;
-
- /* initialize internal data structure etc. */
- retval = acpiphp_glue_init();
-
- /* read initial number of slots */
- if (!retval) {
- num_slots = acpiphp_get_num_slots();
- if (num_slots == 0) {
- acpiphp_glue_exit();
- retval = -ENODEV;
- }
- }
-
- return retval;
-}
-
/**
* release_slot - free up the memory used by a slot
* @hotplug_slot: slot to free
@@ -379,7 +359,8 @@ static int __init acpiphp_init(void)
return 0;
/* read all the ACPI info from the system */
- return init_acpi();
+ /* initialize internal data structure etc. */
+ return acpiphp_glue_init();
}
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index e9e2e06..1f26706 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -1408,28 +1408,6 @@ void acpiphp_glue_exit(void)
acpi_pci_unregister_driver(&acpi_pci_hp_driver);
}
-
-/**
- * acpiphp_get_num_slots - count number of slots in a system
- */
-int __init acpiphp_get_num_slots(void)
-{
- struct acpiphp_bridge *bridge;
- int num_slots = 0;
-
- list_for_each_entry(bridge, &bridge_list, list) {
- dbg("Bus %04x:%02x has %d slot%s\n",
- pci_domain_nr(bridge->pci_bus),
- bridge->pci_bus->number, bridge->nr_slots,
- bridge->nr_slots == 1 ? "" : "s");
- num_slots += bridge->nr_slots;
- }
-
- dbg("Total %d slots\n", num_slots);
- return num_slots;
-}
-
-
/**
* acpiphp_enable_slot - power on slot
* @slot: ACPI PHP slot
--
1.7.7
next prev parent reply other threads:[~2012-09-19 18:55 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-02 21:50 [PATCH part2 0/6] PCI, x86: pci root bus hotplug support - part2 Yinghai Lu
2012-09-02 21:50 ` [PATCH part2 1/6] x86, PCI: Separate pcibios_allocate_bridge_resources() Yinghai Lu
2012-09-02 21:50 ` [PATCH part2 2/6] x86, PCI: Separate pcibios_allocate_dev_resources() Yinghai Lu
2012-09-02 21:50 ` [PATCH part2 3/6] x86, PCI: Let pcibios_allocate_bus_resources() take bus instead Yinghai Lu
2012-09-02 21:50 ` [PATCH part2 4/6] x86, PCI: Separate rom resource claim out Yinghai Lu
2012-09-17 23:38 ` Bjorn Helgaas
2012-09-18 3:18 ` Yinghai Lu
2012-09-02 21:50 ` [PATCH part2 5/6] PCI, x86: Add pcibios_fw_addr_done Yinghai Lu
2012-09-02 21:50 ` [PATCH part2 6/6] PCI: Claim hw/fw allocated resources in hot add path Yinghai Lu
2012-09-18 0:12 ` Bjorn Helgaas
2012-09-18 4:44 ` Yinghai Lu
2012-09-18 5:36 ` Yinghai Lu
2012-09-19 18:54 ` [PATCH 00/40] PCI, ACPI, x86: pci root bus hotplug support Yinghai Lu
2012-09-19 18:54 ` [PATCH 01/40] PCI: fix default vga ref_count Yinghai Lu
2012-09-21 20:52 ` Bjorn Helgaas
2012-09-21 21:18 ` Yinghai Lu
2012-09-23 15:25 ` Jiang Liu
2012-09-19 18:54 ` [PATCH 02/40] PCI, x86: clear initial value for root info resources Yinghai Lu
2012-09-19 18:54 ` [PATCH 03/40] PCI, ia64: " Yinghai Lu
2012-09-19 18:54 ` [PATCH 04/40] PCI, acpiphp: Add is_hotplug_bridge detection Yinghai Lu
2012-09-19 18:54 ` [PATCH 05/40] PCI: Add root bus children dev's res to fail list Yinghai Lu
2012-09-19 18:54 ` [PATCH 06/40] PCI: Split out stop_bus_device and remove_bus_dev again Yinghai Lu
2012-09-19 18:54 ` [PATCH 07/40] x86, PCI: Separate pcibios_allocate_bridge_resources() Yinghai Lu
2012-09-19 18:54 ` [PATCH 08/40] x86, PCI: Separate pcibios_allocate_dev_resources() Yinghai Lu
2012-09-19 18:54 ` [PATCH 09/40] x86, PCI: Let pcibios_allocate_bus_resources() take bus instead Yinghai Lu
2012-09-19 18:54 ` [PATCH 10/40] x86, PCI: Separate rom resource claim out Yinghai Lu
2012-09-19 18:54 ` [PATCH 11/40] PCI, x86: Add pcibios_fw_addr_done Yinghai Lu
2012-09-19 18:54 ` [PATCH 12/40] PCI, x86: Remove __init for hw/fw allocated functions Yinghai Lu
2012-09-19 18:54 ` [PATCH 13/40] PCI: Claim hw/fw allocated resources in hot add path Yinghai Lu
2012-09-19 18:54 ` [PATCH 14/40] PCI: Separate out pci_assign_unassigned_bus_resources() Yinghai Lu
2012-09-19 18:54 ` [PATCH 15/40] PCI: Move back pci_rescan_bus() to probe.c Yinghai Lu
2012-09-19 18:54 ` [PATCH 16/40] PCI: pci_bus_size_bridges() should not size own bridge Yinghai Lu
2012-09-19 18:54 ` [PATCH 17/40] PCI: Use __pci_bus_size_bridges() directly in pci_assign_unassigned_bus_resources() Yinghai Lu
2012-09-19 18:54 ` [PATCH 18/40] PCI: Rescan bus using callback method too Yinghai Lu
2012-09-19 18:54 ` [PATCH 19/40] PCI, sysfs: Clean up rescan/remove with schedule_callback Yinghai Lu
2012-09-19 18:54 ` [PATCH 20/40] PCI: Fix a device reference count leakage issue in pci_dev_present() Yinghai Lu
2012-09-19 18:54 ` [PATCH 21/40] PCI: Add pci_stop_and_remove_root_bus() Yinghai Lu
2012-09-19 18:54 ` [PATCH 22/40] PCI, acpiphp: Separate out hot-add support of pci host bridge Yinghai Lu
2012-10-12 10:36 ` Tang Chen
2012-09-19 18:54 ` [PATCH 23/40] PCI, ACPI: Pass device instead of handle when config root bridge Yinghai Lu
2012-09-19 18:54 ` [PATCH 24/40] PCI, acpi: Update acpi_pci_driver add/remove interface Yinghai Lu
2012-09-19 18:54 ` [PATCH 25/40] PCI, ACPI: Make acpi_pci_root_remove remove pci root bus too Yinghai Lu
2012-09-19 18:54 ` [PATCH 26/40] PCI, ACPI: del root bus prt Yinghai Lu
2012-09-19 18:54 ` [PATCH 27/40] ACPI: acpi_bus_trim to support two steps Yinghai Lu
2012-09-19 18:54 ` [PATCH 28/40] PCI, ACPI: Add pci_root_hp hot removal notification support Yinghai Lu
2012-09-19 18:54 ` [PATCH 29/40] PCI, ACPI: Add alloc_acpi_hp_work() Yinghai Lu
2012-09-19 18:54 ` [PATCH 30/40] PCI, acpiphp: Use acpi_hp_work Yinghai Lu
2012-09-19 18:54 ` [PATCH 31/40] PCI, pci_root_hp: " Yinghai Lu
2012-09-19 18:54 ` [PATCH 32/40] PCI, ACPI: Make kacpi_hotplug_wq static Yinghai Lu
2012-09-19 18:54 ` [PATCH 33/40] ACPI, PCI: Use normal list for struct acpi_pci_driver Yinghai Lu
2012-09-19 18:54 ` [PATCH 34/40] ACPI, PCI: Notify acpi_pci_drivers when hot-plugging PCI root bridges Yinghai Lu
2012-09-19 18:54 ` [PATCH 35/40] ACPI, PCI: Protect global lists in drivers/acpi/pci_root.c Yinghai Lu
2012-09-19 18:54 ` [PATCH 36/40] PCI: Set dev_node early for pci_dev Yinghai Lu
2012-09-19 18:54 ` [PATCH 37/40] PCI, x86: Move pci_enable_bridges() down Yinghai Lu
2012-09-19 18:54 ` [PATCH 38/40] ACPI, PCI: Skip extra pci_enable_bridges for non hot-add root Yinghai Lu
2012-09-19 18:54 ` Yinghai Lu [this message]
2012-09-19 18:54 ` [PATCH 40/40] ACPI: Enable SCI_EMULATE to manually simulate physical hotplug testing Yinghai Lu
2012-10-17 7:50 ` [PATCH 00/40] PCI, ACPI, x86: pci root bus hotplug support Yijing Wang
2012-10-17 16:19 ` Yinghai Lu
2012-10-18 0:51 ` Yijing Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1348080894-23412-40-git-send-email-yinghai@kernel.org \
--to=yinghai@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=bhelgaas@google.com \
--cc=gregkh@linuxfoundation.org \
--cc=izumi.taku@jp.fujitsu.com \
--cc=jiang.liu@huawei.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).