From: Yinghai Lu <yinghai@kernel.org>
To: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org, Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH 03/10] PCI: prepare to use device drivers_autoprobe to delay attach drivers
Date: Mon, 1 Oct 2012 23:33:01 -0700 [thread overview]
Message-ID: <1349159588-15029-4-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1349159588-15029-1-git-send-email-yinghai@kernel.org>
Now pci enumerate the pci devices later and later use pci_bus_add_devices to
add them to devices and probe pci devices.
The reason for that two steps, want to do pci_assign_unassigned_resources
for hot add pci devices before pci drivers get loaded.
That step would leave pci devices out of devices tree for a while, and we
can not use bus iterator to loop pci devices.
We could device drivers_autoprobe and pci_bus_type notifier to delay pci
driver loading instead of keep of pci device out of device tree.
The patch add notifier to split out device attach out of device_add.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
drivers/pci/bus.c | 11 +++++++++++
drivers/pci/hotplug.c | 25 +++++++++++++++++++++++++
2 files changed, 36 insertions(+), 0 deletions(-)
diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
index 6fe2115..3144262 100644
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -160,6 +160,16 @@ pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res,
void __weak pcibios_resource_survey_bus(struct pci_bus *bus) { }
+static void pci_bus_attach_device(struct pci_dev *dev)
+{
+ int ret;
+
+ ret = device_attach(&dev->dev);
+ /* make rescan working ? */
+ dev->dev.drivers_autoprobe = true;
+ WARN_ON(ret < 0);
+}
+
/**
* pci_bus_add_device - add a single device
* @dev: device to add
@@ -176,6 +186,7 @@ int pci_bus_add_device(struct pci_dev *dev)
if (retval)
return retval;
+ pci_bus_attach_device(dev);
dev->is_added = 1;
pci_proc_attach_device(dev);
pci_create_sysfs_dev_files(dev);
diff --git a/drivers/pci/hotplug.c b/drivers/pci/hotplug.c
index 2b5352a..3983934 100644
--- a/drivers/pci/hotplug.c
+++ b/drivers/pci/hotplug.c
@@ -35,3 +35,28 @@ int pci_uevent(struct device *dev, struct kobj_uevent_env *env)
return -ENOMEM;
return 0;
}
+
+static int pci_hp_notifier(struct notifier_block *nb,
+ unsigned long event, void *data)
+{
+ struct device *dev = data;
+
+ switch (event) {
+ case BUS_NOTIFY_ADD_DEVICE:
+ dev->drivers_autoprobe = false;
+ break;
+ }
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block pci_hp_nb = {
+ .notifier_call = &pci_hp_notifier,
+};
+
+static int __init pci_hp_init(void)
+{
+ return bus_register_notifier(&pci_bus_type, &pci_hp_nb);
+}
+
+fs_initcall(pci_hp_init);
--
1.7.7
next prev parent reply other threads:[~2012-10-02 6:33 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-02 6:32 [PATCH 00/10] PCI, ACPI: Use bus type notifier for root bus hotplug Yinghai Lu
2012-10-02 6:32 ` [PATCH 01/10] device: add drivers_autoprobe in struct device Yinghai Lu
2012-10-02 13:33 ` Greg Kroah-Hartman
2012-10-02 17:39 ` Yinghai Lu
2012-10-02 17:47 ` Greg Kroah-Hartman
2012-10-02 18:00 ` Bjorn Helgaas
2012-10-02 20:20 ` Yinghai Lu
2012-10-02 20:45 ` Greg Kroah-Hartman
2012-10-02 21:47 ` Yinghai Lu
2012-10-02 22:38 ` Bjorn Helgaas
2012-10-02 23:20 ` Yinghai Lu
2012-10-03 0:00 ` Yinghai Lu
2012-10-03 2:07 ` Yinghai Lu
2012-10-03 2:08 ` Yinghai Lu
2012-10-03 19:48 ` Bjorn Helgaas
2012-10-03 20:50 ` Yinghai Lu
2012-10-03 23:00 ` [PATCH 0/4] ACPI: kill acpi_pci_root_start Yinghai Lu
2012-10-03 23:00 ` [PATCH 1/4] ACPI: add drivers_autoprobe in struct acpi_device Yinghai Lu
2012-10-04 13:03 ` Konrad Rzeszutek Wilk
2012-10-04 15:15 ` Yinghai Lu
2012-10-09 16:38 ` Konrad Rzeszutek Wilk
2012-10-03 23:00 ` [PATCH 2/4] ACPI: use device drivers_autoprobe to delay loading acpi drivers Yinghai Lu
2012-10-03 23:00 ` [PATCH 3/4] PCI, ACPI: Remove not used acpi_pci_root_start() Yinghai Lu
2012-10-03 23:00 ` [PATCH 4/4] ACPI: remove acpi_op_start workaround Yinghai Lu
2012-10-04 12:57 ` Konrad Rzeszutek Wilk
2012-10-04 17:47 ` [PATCH 0/4] ACPI: kill acpi_pci_root_start Bjorn Helgaas
2012-10-04 18:36 ` Yinghai Lu
2012-10-04 19:44 ` Bjorn Helgaas
2012-10-04 19:54 ` Rafael J. Wysocki
2012-10-04 20:14 ` Yinghai Lu
2012-10-04 20:47 ` Bjorn Helgaas
2012-10-04 19:53 ` Rafael J. Wysocki
2012-10-04 21:23 ` Rafael J. Wysocki
2012-10-04 21:31 ` Yinghai Lu
2012-10-04 21:53 ` Rafael J. Wysocki
2012-10-04 22:01 ` Yinghai Lu
2012-10-04 22:36 ` Rafael J. Wysocki
2012-10-04 22:46 ` Yinghai Lu
2012-10-05 23:01 ` Rafael J. Wysocki
2012-10-05 23:10 ` Yinghai Lu
2012-10-08 20:12 ` Rafael J. Wysocki
2012-10-02 6:33 ` [PATCH 02/10] ACPI: use device drivers_autoprobe to delay loading acpi drivers Yinghai Lu
2012-10-02 6:33 ` Yinghai Lu [this message]
2012-10-02 6:33 ` [PATCH 04/10] PCI: Use device_add for device and bus early Yinghai Lu
2012-10-02 6:33 ` [PATCH 05/10] PCI, ACPI: Separate out acpi_pci_root_osc_contorl_set Yinghai Lu
2012-10-02 6:33 ` [PATCH 06/10] PCI, ACPI: Move hot add root bus conf code to acpi_pci_root_add Yinghai Lu
2012-10-02 6:33 ` [PATCH 07/10] PCI, ACPI: Remove not used acpi_pci_root_start() Yinghai Lu
2012-10-02 6:33 ` [PATCH 08/10] PCI: Add dev_is_pci_host_bridge() helper Yinghai Lu
2012-10-02 6:33 ` [PATCH 09/10] PCI, ACPI: using acpi/pci bind path for pci_host_bridge Yinghai Lu
2012-10-02 6:33 ` [PATCH 10/10] PCI, ACPI: use bus_type notifier for acpi_pci_bind_notify Yinghai Lu
2012-10-06 2:57 ` [PATCH 00/10] PCI, ACPI: Use bus type notifier for root bus hotplug Jiang Liu
2012-10-06 7:25 ` Yinghai Lu
2012-10-07 15:17 ` Jiang Liu
2012-10-07 22:33 ` Yinghai Lu
2012-10-08 15:23 ` Jiang Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1349159588-15029-4-git-send-email-yinghai@kernel.org \
--to=yinghai@kernel.org \
--cc=bhelgaas@google.com \
--cc=linux-pci@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).