* [PATCH v3] x86/pci: Allow x86 platforms to use translation offsets
@ 2012-11-06 21:42 Mike Yoknis
2012-11-07 23:07 ` Bjorn Helgaas
0 siblings, 1 reply; 2+ messages in thread
From: Mike Yoknis @ 2012-11-06 21:42 UTC (permalink / raw)
To: bhelgaas; +Cc: Linux-pci, mike.yoknis
Patch v3 changes: applies cleanly to 3.7.0-rc3
The memory range descriptors in the _CRS control method contain an address
translation offset for host bridges. This value is used to translate addresses
across the bridge. The support to use _TRA values is present for other
architectures but not for X86 platforms.
For existing X86 platforms the _TRA value is zero.
Non-zero _TRA values are expected on future X86 platforms.
This change will register that value with the resource.
Signed-off-by: Mike Yoknis <mike.yoknis@hp.com>
---
arch/x86/pci/acpi.c | 21 ++++++++++++++++++---
1 file changed, 18 insertions(+), 3 deletions(-)
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index 192397c..9cecffc 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -12,6 +12,7 @@ struct pci_root_info {
char name[16];
unsigned int res_num;
struct resource *res;
+ resource_size_t *res_offset;
struct pci_sysdata sd;
#ifdef CONFIG_PCI_MMCONFIG
bool mcfg_added;
@@ -305,6 +306,7 @@ setup_resource(struct acpi_resource *acpi_res, void *data)
res->flags = flags;
res->start = start;
res->end = end;
+ info->res_offset[info->res_num] = addr.translation_offset;
if (!pci_use_crs) {
dev_printk(KERN_DEBUG, &info->bridge->dev,
@@ -374,7 +376,8 @@ static void add_resources(struct pci_root_info *info,
"ignoring host bridge window %pR (conflicts with %s %pR)\n",
res, conflict->name, conflict);
else
- pci_add_resource(resources, res);
+ pci_add_resource_offset(resources, res,
+ info->res_offset[i]);
}
}
@@ -382,6 +385,8 @@ static void free_pci_root_info_res(struct pci_root_info *info)
{
kfree(info->res);
info->res = NULL;
+ kfree(info->res_offset);
+ info->res_offset = NULL;
info->res_num = 0;
}
@@ -432,10 +437,20 @@ probe_pci_root_info(struct pci_root_info *info, struct acpi_device *device,
return;
size = sizeof(*info->res) * info->res_num;
- info->res_num = 0;
info->res = kzalloc(size, GFP_KERNEL);
- if (!info->res)
+ if (!info->res) {
+ info->res_num = 0;
+ return;
+ }
+
+ size = sizeof(*info->res_offset) * info->res_num;
+ info->res_num = 0;
+ info->res_offset = kzalloc(size, GFP_KERNEL);
+ if (!info->res_offset) {
+ kfree(info->res);
+ info->res = NULL;
return;
+ }
acpi_walk_resources(device->handle, METHOD_NAME__CRS, setup_resource,
info);
--
1.7.11.3
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v3] x86/pci: Allow x86 platforms to use translation offsets
2012-11-06 21:42 [PATCH v3] x86/pci: Allow x86 platforms to use translation offsets Mike Yoknis
@ 2012-11-07 23:07 ` Bjorn Helgaas
0 siblings, 0 replies; 2+ messages in thread
From: Bjorn Helgaas @ 2012-11-07 23:07 UTC (permalink / raw)
To: Mike Yoknis; +Cc: Linux-pci
On Tue, Nov 6, 2012 at 2:42 PM, Mike Yoknis <mike.yoknis@hp.com> wrote:
> Patch v3 changes: applies cleanly to 3.7.0-rc3
>
> The memory range descriptors in the _CRS control method contain an address
> translation offset for host bridges. This value is used to translate addresses
> across the bridge. The support to use _TRA values is present for other
> architectures but not for X86 platforms.
>
> For existing X86 platforms the _TRA value is zero.
> Non-zero _TRA values are expected on future X86 platforms.
> This change will register that value with the resource.
>
> Signed-off-by: Mike Yoknis <mike.yoknis@hp.com>
Applied to my pci/mike-x86-tra branch as v3.8 material. Thanks!
> ---
> arch/x86/pci/acpi.c | 21 ++++++++++++++++++---
> 1 file changed, 18 insertions(+), 3 deletions(-)
>
> diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
> index 192397c..9cecffc 100644
> --- a/arch/x86/pci/acpi.c
> +++ b/arch/x86/pci/acpi.c
> @@ -12,6 +12,7 @@ struct pci_root_info {
> char name[16];
> unsigned int res_num;
> struct resource *res;
> + resource_size_t *res_offset;
> struct pci_sysdata sd;
> #ifdef CONFIG_PCI_MMCONFIG
> bool mcfg_added;
> @@ -305,6 +306,7 @@ setup_resource(struct acpi_resource *acpi_res, void *data)
> res->flags = flags;
> res->start = start;
> res->end = end;
> + info->res_offset[info->res_num] = addr.translation_offset;
>
> if (!pci_use_crs) {
> dev_printk(KERN_DEBUG, &info->bridge->dev,
> @@ -374,7 +376,8 @@ static void add_resources(struct pci_root_info *info,
> "ignoring host bridge window %pR (conflicts with %s %pR)\n",
> res, conflict->name, conflict);
> else
> - pci_add_resource(resources, res);
> + pci_add_resource_offset(resources, res,
> + info->res_offset[i]);
> }
> }
>
> @@ -382,6 +385,8 @@ static void free_pci_root_info_res(struct pci_root_info *info)
> {
> kfree(info->res);
> info->res = NULL;
> + kfree(info->res_offset);
> + info->res_offset = NULL;
> info->res_num = 0;
> }
>
> @@ -432,10 +437,20 @@ probe_pci_root_info(struct pci_root_info *info, struct acpi_device *device,
> return;
>
> size = sizeof(*info->res) * info->res_num;
> - info->res_num = 0;
> info->res = kzalloc(size, GFP_KERNEL);
> - if (!info->res)
> + if (!info->res) {
> + info->res_num = 0;
> + return;
> + }
> +
> + size = sizeof(*info->res_offset) * info->res_num;
> + info->res_num = 0;
> + info->res_offset = kzalloc(size, GFP_KERNEL);
> + if (!info->res_offset) {
> + kfree(info->res);
> + info->res = NULL;
> return;
> + }
>
> acpi_walk_resources(device->handle, METHOD_NAME__CRS, setup_resource,
> info);
> --
> 1.7.11.3
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2012-11-07 23:07 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-11-06 21:42 [PATCH v3] x86/pci: Allow x86 platforms to use translation offsets Mike Yoknis
2012-11-07 23:07 ` Bjorn Helgaas
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).