From: Yinghai Lu <yinghai@kernel.org>
To: Bjorn Helgaas <bhelgaas@google.com>,
"Rafael J. Wysocki" <rjw@sisk.pl>, Len Brown <lenb@kernel.org>,
Taku Izumi <izumi.taku@jp.fujitsu.com>,
Jiang Liu <jiang.liu@huawei.com>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-acpi@vger.kernel.org, Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH v8 01/22] PCI, acpiphp: Add is_hotplug_bridge detection
Date: Fri, 11 Jan 2013 14:40:28 -0800 [thread overview]
Message-ID: <1357944049-29620-2-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1357944049-29620-1-git-send-email-yinghai@kernel.org>
When system support hotplug bridge with children hotplug slots, we need
to make sure that parent bridge get preallocated resource so later when
device is plugged into children slot, those children devices will get
resource allocated.
We do not meet this problem, because for pcie hotplug card, when acpiphp
is used, pci_scan_bridge will set that for us when detect hotplug bit in
slot cap.
Reported-and-tested-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Jason Baron <jbaron@redhat.com>
---
drivers/pci/hotplug/acpiphp_glue.c | 27 ++++++++++++++++++++++++++-
1 file changed, 26 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 91b5ad8..1e5c5df 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -797,6 +797,29 @@ static void acpiphp_set_acpi_region(struct acpiphp_slot *slot)
}
}
+static void check_hotplug_bridge(struct acpiphp_slot *slot, struct pci_dev *dev)
+{
+ struct acpiphp_func *func;
+
+ if (!dev->subordinate)
+ return;
+
+ /* quirk, or pcie could set it already */
+ if (dev->is_hotplug_bridge)
+ return;
+
+ if (PCI_SLOT(dev->devfn) != slot->device)
+ return;
+
+ list_for_each_entry(func, &slot->funcs, sibling) {
+ if (PCI_FUNC(dev->devfn) == func->function) {
+ /* check if this bridge has ejectable slots */
+ if ((detect_ejectable_slots(func->handle) > 0))
+ dev->is_hotplug_bridge = 1;
+ break;
+ }
+ }
+}
/**
* enable_device - enable, configure a slot
* @slot: slot to be enabled
@@ -831,8 +854,10 @@ static int __ref enable_device(struct acpiphp_slot *slot)
if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) {
max = pci_scan_bridge(bus, dev, max, pass);
- if (pass && dev->subordinate)
+ if (pass && dev->subordinate) {
+ check_hotplug_bridge(slot, dev);
pci_bus_size_bridges(dev->subordinate);
+ }
}
}
}
--
1.7.10.4
next prev parent reply other threads:[~2013-01-11 22:40 UTC|newest]
Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-11 22:40 [PATCH v8 00/22] PCI, ACPI: pci root bus hotplug support / pci match_driver Yinghai Lu
2013-01-11 22:40 ` Yinghai Lu [this message]
2013-01-12 21:35 ` [PATCH v8 01/22] PCI, acpiphp: Add is_hotplug_bridge detection Rafael J. Wysocki
2013-01-15 6:45 ` Yijing Wang
2013-01-15 7:05 ` Yinghai Lu
2013-01-11 22:40 ` [PATCH v8 02/22] PCI: Add root bus children dev's res to fail list Yinghai Lu
2013-01-12 21:37 ` Rafael J. Wysocki
2013-01-15 6:23 ` Yinghai Lu
2013-01-15 11:21 ` Rafael J. Wysocki
2013-01-15 15:44 ` Yinghai Lu
2013-01-15 21:52 ` Rafael J. Wysocki
2013-01-15 22:03 ` Yinghai Lu
2013-01-11 22:40 ` [PATCH v8 03/22] PCI: Set dev_node early for pci_dev Yinghai Lu
2013-01-12 21:38 ` Rafael J. Wysocki
2013-01-11 22:40 ` [PATCH v8 04/22] PCI: Fix a device reference count leakage issue in pci_dev_present() Yinghai Lu
2013-01-12 21:39 ` Rafael J. Wysocki
2013-01-11 22:40 ` [PATCH v8 05/22] PCI: make PCI device create/destroy logic symmetric Yinghai Lu
2013-01-12 21:40 ` Rafael J. Wysocki
2013-01-11 22:40 ` [PATCH v8 06/22] PCI: split registration of PCI bus devices into two stages Yinghai Lu
2013-01-12 22:34 ` Rafael J. Wysocki
2013-01-13 15:25 ` Jiang Liu
2013-01-15 6:29 ` Yinghai Lu
2013-01-11 22:40 ` [PATCH v8 07/22] ACPI: Separate acpi_bus_trim to support two steps Yinghai Lu
2013-01-12 22:40 ` Rafael J. Wysocki
2013-01-15 6:31 ` Yinghai Lu
2013-01-15 11:22 ` Rafael J. Wysocki
2013-01-11 22:40 ` [PATCH v8 08/22] PCI, acpiphp: Separate out hot-add support of pci host bridge Yinghai Lu
2013-01-12 23:18 ` Rafael J. Wysocki
2013-01-15 6:44 ` Yinghai Lu
2013-01-15 15:54 ` Yinghai Lu
2013-01-15 22:00 ` Rafael J. Wysocki
2013-01-15 22:04 ` Yinghai Lu
2013-01-11 22:40 ` [PATCH v8 09/22] PCI, ACPI: Add pci_root_hp hot removal notification support Yinghai Lu
2013-01-12 23:26 ` Rafael J. Wysocki
2013-01-15 6:45 ` Yinghai Lu
2013-01-11 22:40 ` [PATCH v8 10/22] ACPI: Introduce a new acpi handle to determine HID match Yinghai Lu
2013-01-12 23:27 ` Rafael J. Wysocki
2013-01-11 22:40 ` [PATCH v8 11/22] PCI: correctly detect ACPI PCI host bridge objects Yinghai Lu
2013-01-12 23:34 ` Rafael J. Wysocki
2013-01-13 15:32 ` Jiang Liu
2013-01-11 22:40 ` [PATCH v8 12/22] PCI, ACPI: debug print for installation of acpi root bridge's notifier Yinghai Lu
2013-01-12 23:37 ` Rafael J. Wysocki
2013-01-11 22:40 ` [PATCH v8 13/22] PCI, ACPI: remove acpi_root_bridge in pci_root_hp Yinghai Lu
2013-01-12 23:39 ` Rafael J. Wysocki
2013-01-11 22:40 ` [PATCH v8 14/22] ACPI: update ej_event interface to take acpi_device Yinghai Lu
2013-01-12 23:40 ` Rafael J. Wysocki
2013-01-15 6:55 ` Yinghai Lu
2013-01-15 11:26 ` Rafael J. Wysocki
2013-01-15 23:43 ` Yinghai Lu
2013-01-15 23:55 ` Rafael J. Wysocki
2013-01-16 0:22 ` Rafael J. Wysocki
2013-01-16 0:36 ` Yinghai Lu
2013-01-16 14:05 ` Rafael J. Wysocki
2013-01-16 19:37 ` Yinghai Lu
2013-01-16 21:48 ` Rafael J. Wysocki
2013-01-11 22:40 ` [PATCH v8 15/22] ACPI, PCI: Simplify handle_root_bridge_removal() Yinghai Lu
2013-01-12 23:42 ` Rafael J. Wysocki
2013-01-11 22:40 ` [PATCH v8 16/22] PCI, acpiphp: Don't bailout even no slots found yet Yinghai Lu
2013-01-12 23:43 ` Rafael J. Wysocki
2013-01-11 22:40 ` [PATCH v8 17/22] PCI, ACPI: Add alloc_acpi_hp_work() Yinghai Lu
2013-01-12 23:45 ` Rafael J. Wysocki
2013-01-15 6:59 ` Yinghai Lu
2013-01-15 11:27 ` Rafael J. Wysocki
2013-01-11 22:40 ` [PATCH v8 18/22] PCI, acpiphp: Use acpi_hp_work Yinghai Lu
2013-01-11 22:40 ` [PATCH v8 19/22] PCI, pci_root_hp: " Yinghai Lu
2013-01-11 22:40 ` [PATCH v8 20/22] PCI, ACPI: Make kacpi_hotplug_wq static Yinghai Lu
2013-01-11 22:40 ` [PATCH v8 21/22] PCI: add match_driver in struct pci_dev Yinghai Lu
2013-01-12 23:49 ` Rafael J. Wysocki
2013-01-13 15:40 ` Jiang Liu
2013-01-13 20:01 ` Rafael J. Wysocki
2013-01-11 22:40 ` [PATCH v8 22/22] PCI: move device_add out of pci_bus_add_device() Yinghai Lu
2013-01-12 23:54 ` Rafael J. Wysocki
2013-01-15 7:10 ` Yinghai Lu
2013-01-15 11:19 ` Rafael J. Wysocki
2013-01-15 15:45 ` Yinghai Lu
2013-01-16 2:29 ` Yijing Wang
2013-01-16 2:41 ` Yinghai Lu
2013-01-12 21:35 ` [PATCH v8 00/22] PCI, ACPI: pci root bus hotplug support / pci match_driver Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1357944049-29620-2-git-send-email-yinghai@kernel.org \
--to=yinghai@kernel.org \
--cc=bhelgaas@google.com \
--cc=izumi.taku@jp.fujitsu.com \
--cc=jiang.liu@huawei.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=rjw@sisk.pl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).