From: Yinghai Lu <yinghai@kernel.org>
To: Bjorn Helgaas <bhelgaas@google.com>, Ram Pai <linuxram@us.ibm.com>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH v4 09/29] PCI: Use for_each_pci_resource() with IOV releated functions
Date: Fri, 12 Apr 2013 15:44:23 -0700 [thread overview]
Message-ID: <1365806683-26717-10-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1365806683-26717-1-git-send-email-yinghai@kernel.org>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
drivers/pci/iov.c | 31 +++++++++++++++----------------
1 file changed, 15 insertions(+), 16 deletions(-)
diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
index ee599f2..baf6c80 100644
--- a/drivers/pci/iov.c
+++ b/drivers/pci/iov.c
@@ -93,17 +93,20 @@ static int virtfn_add(struct pci_dev *dev, int id, int reset)
pci_setup_device(virtfn);
virtfn->dev.parent = dev->dev.parent;
- for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) {
- res = dev->resource + PCI_IOV_RESOURCES + i;
+ for_each_pci_resource(dev, res, i, PCI_IOV_RES) {
+ struct resource *virtfn_res;
+
if (!res->parent)
continue;
- virtfn->resource[i].name = pci_name(virtfn);
- virtfn->resource[i].flags = res->flags;
+
+ virtfn_res = pci_dev_resource_n(virtfn, i - PCI_IOV_RESOURCES);
+ virtfn_res->name = pci_name(virtfn);
+ virtfn_res->flags = res->flags;
size = resource_size(res);
do_div(size, iov->total_VFs);
- virtfn->resource[i].start = res->start + size * id;
- virtfn->resource[i].end = virtfn->resource[i].start + size - 1;
- rc = request_resource(res, &virtfn->resource[i]);
+ virtfn_res->start = res->start + size * id;
+ virtfn_res->end = virtfn_res->start + size - 1;
+ rc = request_resource(res, virtfn_res);
BUG_ON(rc);
}
@@ -305,9 +308,8 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn)
return -EIO;
nres = 0;
- for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) {
- bars |= (1 << (i + PCI_IOV_RESOURCES));
- res = dev->resource + PCI_IOV_RESOURCES + i;
+ for_each_pci_resource(dev, res, i, PCI_IOV_RES) {
+ bars |= 1 << i;
if (res->parent)
nres++;
}
@@ -465,10 +467,9 @@ found:
pci_write_config_dword(dev, pos + PCI_SRIOV_SYS_PGSIZE, pgsz);
nres = 0;
- for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) {
- res = dev->resource + PCI_IOV_RESOURCES + i;
+ for_each_pci_resource(dev, res, i, PCI_IOV_RES) {
i += __pci_read_base(dev, pci_bar_unknown, res,
- pos + PCI_SRIOV_BAR + i * 4);
+ pos + PCI_SRIOV_BAR + (i - PCI_IOV_RESOURCES) * 4);
if (!res->flags)
continue;
if (resource_size(res) & (PAGE_SIZE - 1)) {
@@ -511,10 +512,8 @@ found:
return 0;
failed:
- for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) {
- res = dev->resource + PCI_IOV_RESOURCES + i;
+ for_each_pci_resource(dev, res, i, PCI_IOV_RES)
res->flags = 0;
- }
return rc;
}
--
1.8.1.4
next prev parent reply other threads:[~2013-04-12 22:44 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-12 22:44 [PATCH v4 00/29] PCI: Add for_each_pci_resource and addon_res support Yinghai Lu
2013-04-12 22:44 ` [PATCH v4 01/29] PCI: Clean up quirk_io_region Yinghai Lu
2013-04-15 18:23 ` Bjorn Helgaas
2013-04-12 22:44 ` [PATCH v4 02/29] PCI: Add pci_dev_resource_n() Yinghai Lu
2013-04-12 22:44 ` [PATCH v4 03/29] PCI: Update pci_resource_start etc to use pci_dev_resource_n() Yinghai Lu
2013-04-12 22:44 ` [PATCH v4 04/29] PCI: Add pci_dev_resource_idx() helper Yinghai Lu
2013-04-12 22:44 ` [PATCH v4 05/29] PCI: Add is_pci_*_resource_idx() helpers Yinghai Lu
2013-04-12 22:44 ` [PATCH v4 06/29] PCI: pci resource iterator Yinghai Lu
2013-04-12 22:44 ` [PATCH v4 07/29] PCI, x86: Use for_each_pci_resource() with pci_allocate_bridge_resources Yinghai Lu
2013-04-12 22:44 ` [PATCH v4 08/29] PCI, x86: Use for_each_pci_resource() with pci_allocate_dev_resources Yinghai Lu
2013-04-12 22:44 ` Yinghai Lu [this message]
2013-04-12 22:44 ` [PATCH v4 10/29] PCI, acpiphp: Use for_each_pci_resource() helper Yinghai Lu
2013-04-12 22:44 ` [PATCH v4 11/29] PCI, pciehp: " Yinghai Lu
2013-04-12 22:44 ` [PATCH v4 12/29] PCI: Use for_each_pci_resource() in pci_enable_dev Yinghai Lu
2013-04-12 22:44 ` [PATCH v4 13/29] PCI: Use for_each_pci_resource() in pci_reassigndev Yinghai Lu
2013-04-12 22:44 ` [PATCH v4 14/29] PCI: Use for_each_pci_resource() with pci bar reassign funcs Yinghai Lu
2013-04-12 22:44 ` [PATCH v4 15/29] PCI: Use for_each_pci_resource() in pci_assign_resource Yinghai Lu
2013-04-12 22:44 ` [PATCH v4 16/29] PCI, x86: Use for_each_pci_resource() with noassign_bars Yinghai Lu
2013-04-12 22:44 ` [PATCH v4 17/29] PCI: Use for_each_pci_resource() in pci_dev_driver() Yinghai Lu
2013-04-12 22:44 ` [PATCH v4 18/29] PCI: Use for_each_pci_resource() in pci resource release Yinghai Lu
2013-04-12 22:44 ` [PATCH v4 19/29] PCI: Use for_each_pci_resource() in pci bases reading Yinghai Lu
2013-04-12 22:44 ` [PATCH v4 20/29] PCI, x86: Use for_each_pci_resource() with mrst Yinghai Lu
2013-04-12 22:44 ` [PATCH v4 21/29] PCI, xen: Use for_each_pci_resource() with xen pci Yinghai Lu
2013-04-12 22:44 ` [PATCH v4 22/29] PCI: Add addon_resource support for pci devices Yinghai Lu
2013-04-12 22:44 ` [PATCH v4 23/29] PCI: Treat addon res as std resources Yinghai Lu
2013-04-12 22:44 ` [PATCH v4 24/29] PCI: Add helpers to add addon_resource Yinghai Lu
2013-04-12 22:44 ` [PATCH v4 25/29] PCI: Update pci_resource_bar() to support addon_resource Yinghai Lu
2013-04-12 22:44 ` [PATCH v4 26/29] PCI: Assign/update resource to addon_res Yinghai Lu
2013-04-12 22:44 ` [PATCH v4 27/29] PCI: Make piix4 quirk to use addon_res Yinghai Lu
2013-04-25 20:39 ` Bjorn Helgaas
2013-04-26 15:22 ` Bjorn Helgaas
2013-04-26 20:29 ` Rafael J. Wysocki
2013-04-12 22:44 ` [PATCH v4 28/29] PCI: Make quirk_io_region " Yinghai Lu
2013-04-12 22:44 ` [PATCH v4 29/29] PCI: Use addon_fixed_resource with ati fixed resource Yinghai Lu
2013-04-25 19:53 ` [PATCH v4 00/29] PCI: Add for_each_pci_resource and addon_res support Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1365806683-26717-10-git-send-email-yinghai@kernel.org \
--to=yinghai@kernel.org \
--cc=bhelgaas@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linuxram@us.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).