[PATCH v2, part 1 0/9] Prepare for introducing PCI bus lock interfaces

[PATCH v2, part 1 0/9] Prepare for introducing PCI bus lock interfaces

[Jiang Liu]

This is a preparation patchset for introducing PCI bus lock mechanisms
to protect PCI subsystem from concurrent hotplug operations.

Patch 1:
	Introduce pci_bus_{get|put}() to manage PCI bus reference count
Patch 2-3:
	pci_alloc_dev() patchset from Gu Zheng
Patch 8:
	Make PCI bus creating/destroying logic symmetric
Other:
	Minor code improvements/cleanups

Gu Zheng (2):
  PCI: Introduce pci_alloc_dev(struct pci_bus*) to replace
    alloc_pci_dev()
  PCI: Convert alloc_pci_dev(void) to pci_alloc_dev(bus) instead

Jiang Liu (7):
  PCI: introduce pci_bus_{get|put}() to manage PCI bus reference count
  PCI: mark pci_scan_bus_parented() as __deprecated
  ACPI, PCI: remove unused global list acpi_pci_roots in pci_root.c
  ACPI, pci_root: use acpi_handle_print() and pr_xxx() to print messages
  PCI, IA64: minor code clean up
  PCI: make PCI host bridge/bus creating and destroying logic symmetric
  PCI, unicore, m68k: remove redundant call of pci_bus_add_devices()

 arch/ia64/sn/kernel/io_init.c     |  11 +---
 arch/m68k/platform/coldfire/pci.c |   2 +-
 arch/powerpc/kernel/pci_of_scan.c |   3 +-
 arch/sparc/kernel/pci.c           |   3 +-
 arch/tile/kernel/pci.c            |   3 --
 arch/unicore32/kernel/pci.c       |   5 --
 drivers/acpi/pci_root.c           |  96 +++++++++++++----------------------
 drivers/char/agp/alpha-agp.c      |   2 +-
 drivers/char/agp/parisc-agp.c     |   2 +-
 drivers/pci/bus.c                 |  15 ++++++
 drivers/pci/iov.c                 |   8 +--
 drivers/pci/probe.c               | 102 ++++++++++++++++++--------------------
 drivers/pci/remove.c              |   3 +-
 drivers/scsi/megaraid.c           |   2 +-
 include/acpi/acpi_bus.h           |   1 -
 include/linux/pci.h               |   9 ++--
 16 files changed, 119 insertions(+), 148 deletions(-)

-- 
1.8.1.2

[PATCH v2, part 1 1/9] PCI: introduce pci_bus_{get|put}() to manage PCI bus reference count

[Jiang Liu]

Introduce helper functions pci_bus_{get|put}() to manage PCI bus
reference count.

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Cc: linux-pci@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/pci/bus.c   | 15 +++++++++++++++
 include/linux/pci.h |  2 ++
 2 files changed, 17 insertions(+)

diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
index 748f8f3..f7e1f76 100644
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -282,6 +282,21 @@ void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
 }
 EXPORT_SYMBOL_GPL(pci_walk_bus);
 
+struct pci_bus *pci_bus_get(struct pci_bus *bus)
+{
+	if (bus)
+		get_device(&bus->dev);
+	return bus;
+}
+EXPORT_SYMBOL(pci_bus_get);
+
+void pci_bus_put(struct pci_bus *bus)
+{
+	if (bus)
+		put_device(&bus->dev);
+}
+EXPORT_SYMBOL(pci_bus_put);
+
 EXPORT_SYMBOL(pci_bus_alloc_resource);
 EXPORT_SYMBOL_GPL(pci_bus_add_device);
 EXPORT_SYMBOL(pci_bus_add_devices);
diff --git a/include/linux/pci.h b/include/linux/pci.h
index e19d864..f5e13f0 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1017,6 +1017,8 @@ int pci_request_selected_regions_exclusive(struct pci_dev *, int, const char *);
 void pci_release_selected_regions(struct pci_dev *, int);
 
 /* drivers/pci/bus.c */
+struct pci_bus *pci_bus_get(struct pci_bus *bus);
+void pci_bus_put(struct pci_bus *bus);
 void pci_add_resource(struct list_head *resources, struct resource *res);
 void pci_add_resource_offset(struct list_head *resources, struct resource *res,
 			     resource_size_t offset);
-- 
1.8.1.2

[PATCH v2, part 1 2/9] PCI: Introduce pci_alloc_dev(struct pci_bus*) to replace alloc_pci_dev()

[Jiang Liu]

From: Gu Zheng <guz.fnst@cn.fujitsu.com>

<marker to prevent gmail from removing below "From:">
From: Gu Zheng <guz.fnst@cn.fujitsu.com>

Now here we introduce a new interface to replace alloc_pci_dev():
	struct pci_dev *pci_alloc_dev(struct pci_bus *bus)

It take a "struct pci_bus *" argument, so we can alloc a pci device
on a target pci bus, and it acquire the reference of the pci_bus.
We use pci_alloc_dev(NULL) to simplify the old alloc_pci_dev(),
and keep it for a while but mark it as __deprecated.

Jiang Liu <jiang.liu@huawei.com>
Minor code tweaks and change
__deprecated struct pci_dev * alloc_pci_dev(void);
to
struct pci_dev * __deprecated alloc_pci_dev(void);

This enhancement makes it safe to reference pci_dev->bus when holding
a reference on a pci_dev.

Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/pci/probe.c | 16 +++++++++++-----
 include/linux/pci.h |  3 ++-
 2 files changed, 13 insertions(+), 6 deletions(-)

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 43ece5d..4f0bc0a 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -1201,18 +1201,24 @@ static void pci_release_bus_bridge_dev(struct device *dev)
 	kfree(bridge);
 }
 
-struct pci_dev *alloc_pci_dev(void)
+struct pci_dev *pci_alloc_dev(struct pci_bus *bus)
 {
 	struct pci_dev *dev;
 
 	dev = kzalloc(sizeof(struct pci_dev), GFP_KERNEL);
-	if (!dev)
-		return NULL;
-
-	INIT_LIST_HEAD(&dev->bus_list);
+	if (dev) {
+		INIT_LIST_HEAD(&dev->bus_list);
+		dev->bus = pci_bus_get(bus);
+	}
 
 	return dev;
 }
+EXPORT_SYMBOL(pci_alloc_dev);
+
+struct pci_dev *alloc_pci_dev(void)
+{
+	return pci_alloc_dev(NULL);
+}
 EXPORT_SYMBOL(alloc_pci_dev);
 
 bool pci_bus_read_dev_vendor_id(struct pci_bus *bus, int devfn, u32 *l,
diff --git a/include/linux/pci.h b/include/linux/pci.h
index f5e13f0..68beb11 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -364,7 +364,8 @@ static inline struct pci_dev *pci_physfn(struct pci_dev *dev)
 	return dev;
 }
 
-struct pci_dev *alloc_pci_dev(void);
+struct pci_dev *pci_alloc_dev(struct pci_bus *bus);
+struct pci_dev * __deprecated alloc_pci_dev(void);
 
 #define	to_pci_dev(n) container_of(n, struct pci_dev, dev)
 #define for_each_pci_dev(d) while ((d = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, d)) != NULL)
-- 
1.8.1.2

[PATCH v2, part 1 3/9] PCI: Convert alloc_pci_dev(void) to pci_alloc_dev(bus) instead

[Jiang Liu]

From: Gu Zheng <guz.fnst@cn.fujitsu.com>

<marker to prevent gmail from removing below "From:">
From: Gu Zheng <guz.fnst@cn.fujitsu.com>

Use the new pci_alloc_dev(bus) to replace the existing using of
alloc_pci_dev(void).

v2:
  Follow Bjorn's correction to move pci_bus_put() to
  pci_release_dev() instead.

Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Neela Syam Kolli <megaraidlinux@lsi.com>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org
Cc: sparclinux@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
---
 arch/powerpc/kernel/pci_of_scan.c | 3 +--
 arch/sparc/kernel/pci.c           | 3 +--
 drivers/char/agp/alpha-agp.c      | 2 +-
 drivers/char/agp/parisc-agp.c     | 2 +-
 drivers/pci/iov.c                 | 8 +++++---
 drivers/pci/probe.c               | 4 ++--
 drivers/scsi/megaraid.c           | 2 +-
 7 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c
index 2a67e9b..24d01c4 100644
--- a/arch/powerpc/kernel/pci_of_scan.c
+++ b/arch/powerpc/kernel/pci_of_scan.c
@@ -128,7 +128,7 @@ struct pci_dev *of_create_pci_dev(struct device_node *node,
 	const char *type;
 	struct pci_slot *slot;
 
-	dev = alloc_pci_dev();
+	dev = pci_alloc_dev(bus);
 	if (!dev)
 		return NULL;
 	type = of_get_property(node, "device_type", NULL);
@@ -137,7 +137,6 @@ struct pci_dev *of_create_pci_dev(struct device_node *node,
 
 	pr_debug("    create device, devfn: %x, type: %s\n", devfn, type);
 
-	dev->bus = bus;
 	dev->dev.of_node = of_node_get(node);
 	dev->dev.parent = bus->bridge;
 	dev->dev.bus = &pci_bus_type;
diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index baf4366..e5871fb 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -254,7 +254,7 @@ static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
 	const char *type;
 	u32 class;
 
-	dev = alloc_pci_dev();
+	dev = pci_alloc_dev(bus);
 	if (!dev)
 		return NULL;
 
@@ -281,7 +281,6 @@ static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
 		printk("    create device, devfn: %x, type: %s\n",
 		       devfn, type);
 
-	dev->bus = bus;
 	dev->sysdata = node;
 	dev->dev.parent = bus->bridge;
 	dev->dev.bus = &pci_bus_type;
diff --git a/drivers/char/agp/alpha-agp.c b/drivers/char/agp/alpha-agp.c
index dd84af4..199b8e9 100644
--- a/drivers/char/agp/alpha-agp.c
+++ b/drivers/char/agp/alpha-agp.c
@@ -174,7 +174,7 @@ alpha_core_agp_setup(void)
 	/*
 	 * Build a fake pci_dev struct
 	 */
-	pdev = alloc_pci_dev();
+	pdev = pci_alloc_dev(NULL);
 	if (!pdev)
 		return -ENOMEM;
 	pdev->vendor = 0xffff;
diff --git a/drivers/char/agp/parisc-agp.c b/drivers/char/agp/parisc-agp.c
index 94821ab..bf5d247 100644
--- a/drivers/char/agp/parisc-agp.c
+++ b/drivers/char/agp/parisc-agp.c
@@ -333,7 +333,7 @@ parisc_agp_setup(void __iomem *ioc_hpa, void __iomem *lba_hpa)
 	struct agp_bridge_data *bridge;
 	int error = 0;
 
-	fake_bridge_dev = alloc_pci_dev();
+	fake_bridge_dev = pci_alloc_dev(NULL);
 	if (!fake_bridge_dev) {
 		error = -ENOMEM;
 		goto fail;
diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
index ee599f2..24134cd 100644
--- a/drivers/pci/iov.c
+++ b/drivers/pci/iov.c
@@ -75,18 +75,20 @@ static int virtfn_add(struct pci_dev *dev, int id, int reset)
 	struct pci_dev *virtfn;
 	struct resource *res;
 	struct pci_sriov *iov = dev->sriov;
+	struct pci_bus *bus;
 
-	virtfn = alloc_pci_dev();
+	virtfn = pci_alloc_dev(NULL);
 	if (!virtfn)
 		return -ENOMEM;
 
 	mutex_lock(&iov->dev->sriov->lock);
-	virtfn->bus = virtfn_add_bus(dev->bus, virtfn_bus(dev, id));
-	if (!virtfn->bus) {
+	bus = virtfn_add_bus(dev->bus, virtfn_bus(dev, id));
+	if (!bus) {
 		kfree(virtfn);
 		mutex_unlock(&iov->dev->sriov->lock);
 		return -ENOMEM;
 	}
+	virtfn->bus = pci_bus_get(bus);
 	virtfn->devfn = virtfn_devfn(dev, id);
 	virtfn->vendor = dev->vendor;
 	pci_read_config_word(dev, iov->pos + PCI_SRIOV_VF_DID, &virtfn->device);
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 4f0bc0a..bc075a3 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -1131,6 +1131,7 @@ static void pci_release_dev(struct device *dev)
 	struct pci_dev *pci_dev;
 
 	pci_dev = to_pci_dev(dev);
+	pci_bus_put(pci_dev->bus);
 	pci_release_capabilities(pci_dev);
 	pci_release_of_node(pci_dev);
 	kfree(pci_dev);
@@ -1269,11 +1270,10 @@ static struct pci_dev *pci_scan_device(struct pci_bus *bus, int devfn)
 	if (!pci_bus_read_dev_vendor_id(bus, devfn, &l, 60*1000))
 		return NULL;
 
-	dev = alloc_pci_dev();
+	dev = pci_alloc_dev(bus);
 	if (!dev)
 		return NULL;
 
-	dev->bus = bus;
 	dev->devfn = devfn;
 	dev->vendor = l & 0xffff;
 	dev->device = (l >> 16) & 0xffff;
diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c
index 9504ec0..e1660ca 100644
--- a/drivers/scsi/megaraid.c
+++ b/drivers/scsi/megaraid.c
@@ -2025,7 +2025,7 @@ megaraid_abort_and_reset(adapter_t *adapter, Scsi_Cmnd *cmd, int aor)
 static inline int
 make_local_pdev(adapter_t *adapter, struct pci_dev **pdev)
 {
-	*pdev = alloc_pci_dev();
+	*pdev = pci_alloc_dev(NULL);
 
 	if( *pdev == NULL ) return -1;
 
-- 
1.8.1.2

Re: [PATCH v2, part 1 3/9] PCI: Convert alloc_pci_dev(void) to pci_alloc_dev(bus) instead

[Yinghai Lu]

On Mon, May 13, 2013 at 9:08 AM, Jiang Liu <liuj97@gmail.com> wrote:
> From: Gu Zheng <guz.fnst@cn.fujitsu.com>
> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> index 4f0bc0a..bc075a3 100644
> --- a/drivers/pci/probe.c
> +++ b/drivers/pci/probe.c
> @@ -1131,6 +1131,7 @@ static void pci_release_dev(struct device *dev)
>         struct pci_dev *pci_dev;
>
>         pci_dev = to_pci_dev(dev);
> +       pci_bus_put(pci_dev->bus);
>         pci_release_capabilities(pci_dev);
>         pci_release_of_node(pci_dev);
>         kfree(pci_dev);
> @@ -1269,11 +1270,10 @@ static struct pci_dev *pci_scan_device(struct pci_bus *bus, int devfn)
>         if (!pci_bus_read_dev_vendor_id(bus, devfn, &l, 60*1000))
>                 return NULL;
>
> -       dev = alloc_pci_dev();
> +       dev = pci_alloc_dev(bus);
>         if (!dev)
>                 return NULL;
>
> -       dev->bus = bus;
>         dev->devfn = devfn;
>         dev->vendor = l & 0xffff;
>         dev->device = (l >> 16) & 0xffff;

in pci_setup_device() fail path, it release the ref to that bus.

Yinghai

Re: [PATCH v2, part 1 3/9] PCI: Convert alloc_pci_dev(void) to pci_alloc_dev(bus) instead

[Gu Zheng]

[-- Attachment #1: Type: text/plain, Size: 1297 bytes --]

On 05/14/2013 01:23 AM, Yinghai Lu wrote:

> On Mon, May 13, 2013 at 9:08 AM, Jiang Liu <liuj97@gmail.com> wrote:
>> From: Gu Zheng <guz.fnst@cn.fujitsu.com>
>> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
>> index 4f0bc0a..bc075a3 100644
>> --- a/drivers/pci/probe.c
>> +++ b/drivers/pci/probe.c
>> @@ -1131,6 +1131,7 @@ static void pci_release_dev(struct device *dev)
>>         struct pci_dev *pci_dev;
>>
>>         pci_dev = to_pci_dev(dev);
>> +       pci_bus_put(pci_dev->bus);
>>         pci_release_capabilities(pci_dev);
>>         pci_release_of_node(pci_dev);
>>         kfree(pci_dev);
>> @@ -1269,11 +1270,10 @@ static struct pci_dev *pci_scan_device(struct pci_bus *bus, int devfn)
>>         if (!pci_bus_read_dev_vendor_id(bus, devfn, &l, 60*1000))
>>                 return NULL;
>>
>> -       dev = alloc_pci_dev();
>> +       dev = pci_alloc_dev(bus);
>>         if (!dev)
>>                 return NULL;
>>
>> -       dev->bus = bus;
>>         dev->devfn = devfn;
>>         dev->vendor = l & 0xffff;
>>         dev->device = (l >> 16) & 0xffff;
> 
> in pci_setup_device() fail path, it release the ref to that bus.

Yes, you're right, we need to release the bus' ref if pci_setup_device() failed.
Thanks for your correction.:)

Best regards,
Gu

> 
> Yinghai
> 



[-- Attachment #2: Convert-alloc_pci_dev-void-to-pci_alloc_dev-v3.patch --]
[-- Type: text/plain, Size: 5295 bytes --]

>From 7add6d9e70919b95be2debde2f58fc31d26c75bf Mon Sep 17 00:00:00 2001
From: Gu Zheng <guz.fnst@cn.fujitsu.com>
Date: Tue, 14 May 2013 16:11:07 +0800
Subject: [PATCH v3] PCI: Convert alloc_pci_dev(void) to pci_alloc_dev(bus) instead

v3:
  Follow Yinghai's correction to release the bus' ref
  in pci_setup_device() fail path.

v2:
  Follow Bjorn's correction to move pci_bus_put() to
  pci_release_dev() instead.

Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
---
 arch/powerpc/kernel/pci_of_scan.c |    3 +--
 arch/sparc/kernel/pci.c           |    3 +--
 drivers/char/agp/alpha-agp.c      |    2 +-
 drivers/char/agp/parisc-agp.c     |    2 +-
 drivers/pci/iov.c                 |    8 +++++---
 drivers/pci/probe.c               |    5 +++--
 drivers/scsi/megaraid.c           |    2 +-
 7 files changed, 13 insertions(+), 12 deletions(-)

diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c
index 2a67e9b..24d01c4 100644
--- a/arch/powerpc/kernel/pci_of_scan.c
+++ b/arch/powerpc/kernel/pci_of_scan.c
@@ -128,7 +128,7 @@ struct pci_dev *of_create_pci_dev(struct device_node *node,
 	const char *type;
 	struct pci_slot *slot;
 
-	dev = alloc_pci_dev();
+	dev = pci_alloc_dev(bus);
 	if (!dev)
 		return NULL;
 	type = of_get_property(node, "device_type", NULL);
@@ -137,7 +137,6 @@ struct pci_dev *of_create_pci_dev(struct device_node *node,
 
 	pr_debug("    create device, devfn: %x, type: %s\n", devfn, type);
 
-	dev->bus = bus;
 	dev->dev.of_node = of_node_get(node);
 	dev->dev.parent = bus->bridge;
 	dev->dev.bus = &pci_bus_type;
diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index baf4366..e5871fb 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -254,7 +254,7 @@ static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
 	const char *type;
 	u32 class;
 
-	dev = alloc_pci_dev();
+	dev = pci_alloc_dev(bus);
 	if (!dev)
 		return NULL;
 
@@ -281,7 +281,6 @@ static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
 		printk("    create device, devfn: %x, type: %s\n",
 		       devfn, type);
 
-	dev->bus = bus;
 	dev->sysdata = node;
 	dev->dev.parent = bus->bridge;
 	dev->dev.bus = &pci_bus_type;
diff --git a/drivers/char/agp/alpha-agp.c b/drivers/char/agp/alpha-agp.c
index dd84af4..199b8e9 100644
--- a/drivers/char/agp/alpha-agp.c
+++ b/drivers/char/agp/alpha-agp.c
@@ -174,7 +174,7 @@ alpha_core_agp_setup(void)
 	/*
 	 * Build a fake pci_dev struct
 	 */
-	pdev = alloc_pci_dev();
+	pdev = pci_alloc_dev(NULL);
 	if (!pdev)
 		return -ENOMEM;
 	pdev->vendor = 0xffff;
diff --git a/drivers/char/agp/parisc-agp.c b/drivers/char/agp/parisc-agp.c
index 94821ab..bf5d247 100644
--- a/drivers/char/agp/parisc-agp.c
+++ b/drivers/char/agp/parisc-agp.c
@@ -333,7 +333,7 @@ parisc_agp_setup(void __iomem *ioc_hpa, void __iomem *lba_hpa)
 	struct agp_bridge_data *bridge;
 	int error = 0;
 
-	fake_bridge_dev = alloc_pci_dev();
+	fake_bridge_dev = pci_alloc_dev(NULL);
 	if (!fake_bridge_dev) {
 		error = -ENOMEM;
 		goto fail;
diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
index c93071d..2652ca0 100644
--- a/drivers/pci/iov.c
+++ b/drivers/pci/iov.c
@@ -75,18 +75,20 @@ static int virtfn_add(struct pci_dev *dev, int id, int reset)
 	struct pci_dev *virtfn;
 	struct resource *res;
 	struct pci_sriov *iov = dev->sriov;
+	struct pci_bus *bus;
 
-	virtfn = alloc_pci_dev();
+	virtfn = pci_alloc_dev(NULL);
 	if (!virtfn)
 		return -ENOMEM;
 
 	mutex_lock(&iov->dev->sriov->lock);
-	virtfn->bus = virtfn_add_bus(dev->bus, virtfn_bus(dev, id));
-	if (!virtfn->bus) {
+	bus = virtfn_add_bus(dev->bus, virtfn_bus(dev, id));
+	if (!bus) {
 		kfree(virtfn);
 		mutex_unlock(&iov->dev->sriov->lock);
 		return -ENOMEM;
 	}
+	virtfn->bus = pci_bus_get(bus);
 	virtfn->devfn = virtfn_devfn(dev, id);
 	virtfn->vendor = dev->vendor;
 	pci_read_config_word(dev, iov->pos + PCI_SRIOV_VF_DID, &virtfn->device);
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 70f10fa..db8dadc 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -1130,6 +1130,7 @@ static void pci_release_dev(struct device *dev)
 	struct pci_dev *pci_dev;
 
 	pci_dev = to_pci_dev(dev);
+	pci_bus_put(pci_dev->bus);
 	pci_release_capabilities(pci_dev);
 	pci_release_of_node(pci_dev);
 	kfree(pci_dev);
@@ -1263,11 +1264,10 @@ static struct pci_dev *pci_scan_device(struct pci_bus *bus, int devfn)
 	if (!pci_bus_read_dev_vendor_id(bus, devfn, &l, 60*1000))
 		return NULL;
 
-	dev = alloc_pci_dev();
+	dev = pci_alloc_dev(bus);
 	if (!dev)
 		return NULL;
 
-	dev->bus = bus;
 	dev->devfn = devfn;
 	dev->vendor = l & 0xffff;
 	dev->device = (l >> 16) & 0xffff;
@@ -1275,6 +1275,7 @@ static struct pci_dev *pci_scan_device(struct pci_bus *bus, int devfn)
 	pci_set_of_node(dev);
 
 	if (pci_setup_device(dev)) {
+		pci_bus_put(bus);
 		kfree(dev);
 		return NULL;
 	}
diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c
index 846f475f..90c95a3 100644
--- a/drivers/scsi/megaraid.c
+++ b/drivers/scsi/megaraid.c
@@ -2026,7 +2026,7 @@ megaraid_abort_and_reset(adapter_t *adapter, Scsi_Cmnd *cmd, int aor)
 static inline int
 make_local_pdev(adapter_t *adapter, struct pci_dev **pdev)
 {
-	*pdev = alloc_pci_dev();
+	*pdev = pci_alloc_dev(NULL);
 
 	if( *pdev == NULL ) return -1;
 
-- 
1.7.7

Re: [PATCH v2, part 1 3/9] PCI: Convert alloc_pci_dev(void) to pci_alloc_dev(bus) instead

[Liu Jiang]

On 05/14/2013 04:26 PM, Gu Zheng wrote:
> On 05/14/2013 01:23 AM, Yinghai Lu wrote:
>
>> On Mon, May 13, 2013 at 9:08 AM, Jiang Liu <liuj97@gmail.com> wrote:
>>> From: Gu Zheng <guz.fnst@cn.fujitsu.com>
>>> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
>>> index 4f0bc0a..bc075a3 100644
>>> --- a/drivers/pci/probe.c
>>> +++ b/drivers/pci/probe.c
>>> @@ -1131,6 +1131,7 @@ static void pci_release_dev(struct device *dev)
>>>          struct pci_dev *pci_dev;
>>>
>>>          pci_dev = to_pci_dev(dev);
>>> +       pci_bus_put(pci_dev->bus);
>>>          pci_release_capabilities(pci_dev);
>>>          pci_release_of_node(pci_dev);
>>>          kfree(pci_dev);
>>> @@ -1269,11 +1270,10 @@ static struct pci_dev *pci_scan_device(struct pci_bus *bus, int devfn)
>>>          if (!pci_bus_read_dev_vendor_id(bus, devfn, &l, 60*1000))
>>>                  return NULL;
>>>
>>> -       dev = alloc_pci_dev();
>>> +       dev = pci_alloc_dev(bus);
>>>          if (!dev)
>>>                  return NULL;
>>>
>>> -       dev->bus = bus;
>>>          dev->devfn = devfn;
>>>          dev->vendor = l & 0xffff;
>>>          dev->device = (l >> 16) & 0xffff;
>> in pci_setup_device() fail path, it release the ref to that bus.
> Yes, you're right, we need to release the bus' ref if pci_setup_device() failed.
Hi Zheng,
     I suggest to use pci_release_dev() instead because it also needs to 
release OF related resources.
I will update it in next version.

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index bc075a3..2ac6338 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -1281,7 +1281,7 @@ static struct pci_dev *pci_scan_device(struct 
pci_bus *bus
         pci_set_of_node(dev);

         if (pci_setup_device(dev)) {
-               kfree(dev);
+               pci_release_dev(&dev->dev);
                 return NULL;
         }


> hanks for your correction.:)
>
> Best regards,
> Gu
>
>> Yinghai
>>
>

Re: [PATCH v2, part 1 3/9] PCI: Convert alloc_pci_dev(void) to pci_alloc_dev(bus) instead

[Yinghai Lu]

On Tue, May 14, 2013 at 7:59 AM, Liu Jiang <liuj97@gmail.com> wrote:
> On 05/14/2013 04:26 PM, Gu Zheng wrote:
>     I suggest to use pci_release_dev() instead because it also needs to
> release OF related resources.
> I will update it in next version.
>
> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> index bc075a3..2ac6338 100644
> --- a/drivers/pci/probe.c
> +++ b/drivers/pci/probe.c
> @@ -1281,7 +1281,7 @@ static struct pci_dev *pci_scan_device(struct pci_bus
> *bus
>         pci_set_of_node(dev);
>
>         if (pci_setup_device(dev)) {
> -               kfree(dev);
> +               pci_release_dev(&dev->dev);
>                 return NULL;

no, should move pci_set_of_node calling into pci_setup_device.

Yinghai

Re: [PATCH v2, part 1 3/9] PCI: Convert alloc_pci_dev(void) to pci_alloc_dev(bus) instead

[Liu Jiang]

On Tue 14 May 2013 11:10:33 PM CST, Yinghai Lu wrote:
> On Tue, May 14, 2013 at 7:59 AM, Liu Jiang <liuj97@gmail.com> wrote:
>> On 05/14/2013 04:26 PM, Gu Zheng wrote:
>>      I suggest to use pci_release_dev() instead because it also needs to
>> release OF related resources.
>> I will update it in next version.
>>
>> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
>> index bc075a3..2ac6338 100644
>> --- a/drivers/pci/probe.c
>> +++ b/drivers/pci/probe.c
>> @@ -1281,7 +1281,7 @@ static struct pci_dev *pci_scan_device(struct pci_bus
>> *bus
>>          pci_set_of_node(dev);
>>
>>          if (pci_setup_device(dev)) {
>> -               kfree(dev);
>> +               pci_release_dev(&dev->dev);
>>                  return NULL;
>
> no, should move pci_set_of_node calling into pci_setup_device.
>
> Yinghai

I'm not sure whether we should call pci_set_of_node() for SR-IOV 
devices too,
any suggestions here?

Re: [PATCH v2, part 1 3/9] PCI: Convert alloc_pci_dev(void) to pci_alloc_dev(bus) instead

[Yinghai Lu]

On Tue, May 14, 2013 at 9:57 AM, Liu Jiang <liuj97@gmail.com> wrote:
> On Tue 14 May 2013 11:10:33 PM CST, Yinghai Lu wrote:
>>
>> On Tue, May 14, 2013 at 7:59 AM, Liu Jiang <liuj97@gmail.com> wrote:
>>>
>>> On 05/14/2013 04:26 PM, Gu Zheng wrote:
>>>      I suggest to use pci_release_dev() instead because it also needs to
>>> release OF related resources.
>>> I will update it in next version.
>>>
>>> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
>>> index bc075a3..2ac6338 100644
>>> --- a/drivers/pci/probe.c
>>> +++ b/drivers/pci/probe.c
>>> @@ -1281,7 +1281,7 @@ static struct pci_dev *pci_scan_device(struct
>>> pci_bus
>>> *bus
>>>          pci_set_of_node(dev);
>>>
>>>          if (pci_setup_device(dev)) {
>>> -               kfree(dev);
>>> +               pci_release_dev(&dev->dev);
>>>                  return NULL;
>>
>>
>> no, should move pci_set_of_node calling into pci_setup_device.
>>
>> Yinghai
>
>
> I'm not sure whether we should call pci_set_of_node() for SR-IOV devices
> too,
> any suggestions here?

or just move down pci_set_of_node after pci_setup_device?

anyway that is another bug.

Yinghai

Re: [PATCH v2, part 1 3/9] PCI: Convert alloc_pci_dev(void) to pci_alloc_dev(bus) instead

[Liu Jiang]

On Wed 15 May 2013 02:52:51 AM CST, Yinghai Lu wrote:
> On Tue, May 14, 2013 at 9:57 AM, Liu Jiang <liuj97@gmail.com> wrote:
>> On Tue 14 May 2013 11:10:33 PM CST, Yinghai Lu wrote:
>>>
>>> On Tue, May 14, 2013 at 7:59 AM, Liu Jiang <liuj97@gmail.com> wrote:
>>>>
>>>> On 05/14/2013 04:26 PM, Gu Zheng wrote:
>>>>       I suggest to use pci_release_dev() instead because it also needs to
>>>> release OF related resources.
>>>> I will update it in next version.
>>>>
>>>> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
>>>> index bc075a3..2ac6338 100644
>>>> --- a/drivers/pci/probe.c
>>>> +++ b/drivers/pci/probe.c
>>>> @@ -1281,7 +1281,7 @@ static struct pci_dev *pci_scan_device(struct
>>>> pci_bus
>>>> *bus
>>>>           pci_set_of_node(dev);
>>>>
>>>>           if (pci_setup_device(dev)) {
>>>> -               kfree(dev);
>>>> +               pci_release_dev(&dev->dev);
>>>>                   return NULL;
>>>
>>>
>>> no, should move pci_set_of_node calling into pci_setup_device.
>>>
>>> Yinghai
>>
>>
>> I'm not sure whether we should call pci_set_of_node() for SR-IOV devices
>> too,
>> any suggestions here?
>
> or just move down pci_set_of_node after pci_setup_device?
>
> anyway that is another bug.
>
> Yinghai
I'm not familiar with the OF logic and can't make sure whether 
pci_setup_device()
has dependency on dev->of_node. Feel it's more safe to call 
pci_release_of_node()
on failing path instead of tuning call-site of pci_set_of_node().

Re: [PATCH v2, part 1 3/9] PCI: Convert alloc_pci_dev(void) to pci_alloc_dev(bus) instead

[Yinghai Lu]

On Wed, May 15, 2013 at 7:39 AM, Liu Jiang <liuj97@gmail.com> wrote:
> On Wed 15 May 2013 02:52:51 AM CST, Yinghai Lu wrote:
>>
>> On Tue, May 14, 2013 at 9:57 AM, Liu Jiang <liuj97@gmail.com> wrote:
>>>
>>> On Tue 14 May 2013 11:10:33 PM CST, Yinghai Lu wrote:
>>>>
>>>>
>>>> On Tue, May 14, 2013 at 7:59 AM, Liu Jiang <liuj97@gmail.com> wrote:
>>>>>
>>>>>
>>>>> On 05/14/2013 04:26 PM, Gu Zheng wrote:
>>>>>       I suggest to use pci_release_dev() instead because it also needs
>>>>> to
>>>>> release OF related resources.
>>>>> I will update it in next version.
>>>>>
>>>>> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
>>>>> index bc075a3..2ac6338 100644
>>>>> --- a/drivers/pci/probe.c
>>>>> +++ b/drivers/pci/probe.c
>>>>> @@ -1281,7 +1281,7 @@ static struct pci_dev *pci_scan_device(struct
>>>>> pci_bus
>>>>> *bus
>>>>>           pci_set_of_node(dev);
>>>>>
>>>>>           if (pci_setup_device(dev)) {
>>>>> -               kfree(dev);
>>>>> +               pci_release_dev(&dev->dev);
>>>>>                   return NULL;
>>>>
>>>>
>>>>
>>>> no, should move pci_set_of_node calling into pci_setup_device.
>>>>
>>>> Yinghai
>>>
>>>
>>>
>>> I'm not sure whether we should call pci_set_of_node() for SR-IOV devices
>>> too,
>>> any suggestions here?
>>
>>
>> or just move down pci_set_of_node after pci_setup_device?
>>
>> anyway that is another bug.

> I'm not familiar with the OF logic and can't make sure whether
> pci_setup_device()
> has dependency on dev->of_node. Feel it's more safe to call
> pci_release_of_node()
> on failing path instead of tuning call-site of pci_set_of_node().

that is another bug, let of guy handle it.

Yinghai

Re: [PATCH v2, part 1 3/9] PCI: Convert alloc_pci_dev(void) to pci_alloc_dev(bus) instead

[Liu Jiang]

On Wed 15 May 2013 10:43:02 PM CST, Yinghai Lu wrote:
> On Wed, May 15, 2013 at 7:39 AM, Liu Jiang <liuj97@gmail.com> wrote:
>> On Wed 15 May 2013 02:52:51 AM CST, Yinghai Lu wrote:
>>>
>>> On Tue, May 14, 2013 at 9:57 AM, Liu Jiang <liuj97@gmail.com> wrote:
>>>>
>>>> On Tue 14 May 2013 11:10:33 PM CST, Yinghai Lu wrote:
>>>>>
>>>>>
>>>>> On Tue, May 14, 2013 at 7:59 AM, Liu Jiang <liuj97@gmail.com> wrote:
>>>>>>
>>>>>>
>>>>>> On 05/14/2013 04:26 PM, Gu Zheng wrote:
>>>>>>        I suggest to use pci_release_dev() instead because it also needs
>>>>>> to
>>>>>> release OF related resources.
>>>>>> I will update it in next version.
>>>>>>
>>>>>> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
>>>>>> index bc075a3..2ac6338 100644
>>>>>> --- a/drivers/pci/probe.c
>>>>>> +++ b/drivers/pci/probe.c
>>>>>> @@ -1281,7 +1281,7 @@ static struct pci_dev *pci_scan_device(struct
>>>>>> pci_bus
>>>>>> *bus
>>>>>>            pci_set_of_node(dev);
>>>>>>
>>>>>>            if (pci_setup_device(dev)) {
>>>>>> -               kfree(dev);
>>>>>> +               pci_release_dev(&dev->dev);
>>>>>>                    return NULL;
>>>>>
>>>>>
>>>>>
>>>>> no, should move pci_set_of_node calling into pci_setup_device.
>>>>>
>>>>> Yinghai
>>>>
>>>>
>>>>
>>>> I'm not sure whether we should call pci_set_of_node() for SR-IOV devices
>>>> too,
>>>> any suggestions here?
>>>
>>>
>>> or just move down pci_set_of_node after pci_setup_device?
>>>
>>> anyway that is another bug.
>
>> I'm not familiar with the OF logic and can't make sure whether
>> pci_setup_device()
>> has dependency on dev->of_node. Feel it's more safe to call
>> pci_release_of_node()
>> on failing path instead of tuning call-site of pci_set_of_node().
>
> that is another bug, let of guy handle it.
>
> Yinghai
Hi Yinghai,
       I don't know any OF exports, could you please help to CC
some OF experts?
Thanks,
Gerry

Re: [PATCH v2, part 1 3/9] PCI: Convert alloc_pci_dev(void) to pci_alloc_dev(bus) instead

[Yinghai Lu]

On Wed, May 15, 2013 at 7:46 AM, Liu Jiang <liuj97@gmail.com> wrote:
> On Wed 15 May 2013 10:43:02 PM CST, Yinghai Lu wrote:
>>
>
>> that is another bug, let of guy handle it.
>>
>> Yinghai
>
> Hi Yinghai,
>       I don't know any OF exports, could you please help to CC
> some OF experts?

powerpc and sparc are using that.

Ben,

in drivers/pci/probe.c::pci_scan_device() there is

        pci_set_of_node(dev);

        if (pci_setup_device(dev)) {
                kfree(dev);
                return NULL;
        }

so if pci_setup_device fails, there is one dev reference is not release.

please check you can just move down pci_set_of_node down after that
failing path, like


        if (pci_setup_device(dev)) {
                kfree(dev);
                return NULL;
        }

        pci_set_of_node(dev);

Yinghai

Re: [PATCH v2, part 1 3/9] PCI: Convert alloc_pci_dev(void) to pci_alloc_dev(bus) instead

[Benjamin Herrenschmidt]

On Wed, 2013-05-15 at 07:58 -0700, Yinghai Lu wrote:

> Ben,
> 
> in drivers/pci/probe.c::pci_scan_device() there is
> 
>         pci_set_of_node(dev);
> 
>         if (pci_setup_device(dev)) {
>                 kfree(dev);
>                 return NULL;
>         }
> 
> so if pci_setup_device fails, there is one dev reference is not release.
> 
> please check you can just move down pci_set_of_node down after that
> failing path, like
> 
> 
>         if (pci_setup_device(dev)) {
>                 kfree(dev);
>                 return NULL;
>         }
> 
>         pci_set_of_node(dev);

No, we want the OF node set when we run the quirks, we intentionally do
that early, the right thing to do is to to call pci_release_of_node()
in the error path (it's safe to call even if the node is NULL).

Cheers,
Ben.

Re: [PATCH v2, part 1 3/9] PCI: Convert alloc_pci_dev(void) to pci_alloc_dev(bus) instead

[Yinghai Lu]

On Wed, May 15, 2013 at 2:32 PM, Benjamin Herrenschmidt
<benh@kernel.crashing.org> wrote:
> On Wed, 2013-05-15 at 07:58 -0700, Yinghai Lu wrote:
>
>> Ben,
>>
>> in drivers/pci/probe.c::pci_scan_device() there is
>>
>>         pci_set_of_node(dev);
>>
>>         if (pci_setup_device(dev)) {
>>                 kfree(dev);
>>                 return NULL;
>>         }
>>
>> so if pci_setup_device fails, there is one dev reference is not release.
>>
>> please check you can just move down pci_set_of_node down after that
>> failing path, like
>>
>>
>>         if (pci_setup_device(dev)) {
>>                 kfree(dev);
>>                 return NULL;
>>         }
>>
>>         pci_set_of_node(dev);
>
> No, we want the OF node set when we run the quirks, we intentionally do
> that early, the right thing to do is to to call pci_release_of_node()
> in the error path (it's safe to call even if the node is NULL).
>

Good.

We have two options.
1. can you please submit one complete patch, and get it merged into v3.10.
2. put it together with pci_alloc_dev patchset towards to v3.11?

Thanks

Yinghai

Re: [PATCH v2, part 1 3/9] PCI: Convert alloc_pci_dev(void) to pci_alloc_dev(bus) instead

[Benjamin Herrenschmidt]

On Wed, 2013-05-15 at 22:46 +0800, Liu Jiang wrote:
>        I don't know any OF exports, could you please help to CC
> some OF experts?

I wrote that code I think. Sorry, I've missed the beginning of the
thread, what is the problem ?

Cheers,
Ben.

Re: [PATCH v2, part 1 3/9] PCI: Convert alloc_pci_dev(void) to pci_alloc_dev(bus) instead

[Liu Jiang]

On Thu 16 May 2013 05:29:31 AM CST, Benjamin Herrenschmidt wrote:
> On Wed, 2013-05-15 at 22:46 +0800, Liu Jiang wrote:
>>         I don't know any OF exports, could you please help to CC
>> some OF experts?
>
> I wrote that code I think. Sorry, I've missed the beginning of the
> thread, what is the problem ?
>
> Cheers,
> Ben.
>
>
Hi,
     Just found a little memory leak issue that we should call 
pci_release_of_node()
on error recovery path in function pci_scan_device().
        pci_set_of_node(dev);

        if (pci_setup_device(dev)) {
                kfree(dev);
                return NULL;
        }

Regards!
Gerry

[PATCH v2, part 1 4/9] PCI: mark pci_scan_bus_parented() as __deprecated

[Jiang Liu]

Mark pci_scan_bus_parented() as __deprecated and clean up outdated
comments.

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Thierry Reding <thierry.reding@avionic-design.de>
Cc: linux-kernel@vger.kernel.org
Cc: linux-pci@vger.kernel.org
---
 arch/tile/kernel/pci.c | 3 ---
 include/linux/pci.h    | 4 ++--
 2 files changed, 2 insertions(+), 5 deletions(-)

diff --git a/arch/tile/kernel/pci.c b/arch/tile/kernel/pci.c
index 67237d3..936e087 100644
--- a/arch/tile/kernel/pci.c
+++ b/arch/tile/kernel/pci.c
@@ -309,9 +309,6 @@ int __init pcibios_init(void)
 			 *
 			 * It reads the PCI tree for this bus into the Linux
 			 * data structures.
-			 *
-			 * This is inlined in linux/pci.h and calls into
-			 * pci_scan_bus_parented() in probe.c.
 			 */
 			pci_add_resource(&resources, &ioport_resource);
 			pci_add_resource(&resources, &iomem_resource);
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 68beb11..cc4ce27 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -720,8 +720,8 @@ void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
 void pcibios_scan_specific_bus(int busn);
 struct pci_bus *pci_find_bus(int domain, int busnr);
 void pci_bus_add_devices(const struct pci_bus *bus);
-struct pci_bus *pci_scan_bus_parented(struct device *parent, int bus,
-				      struct pci_ops *ops, void *sysdata);
+struct pci_bus * __deprecated pci_scan_bus_parented(struct device *parent,
+			int bus, struct pci_ops *ops, void *sysdata);
 struct pci_bus *pci_scan_bus(int bus, struct pci_ops *ops, void *sysdata);
 struct pci_bus *pci_create_root_bus(struct device *parent, int bus,
 				    struct pci_ops *ops, void *sysdata,
-- 
1.8.1.2

[PATCH v2, part 1 5/9] ACPI, PCI: remove unused global list acpi_pci_roots in pci_root.c

[Jiang Liu]

Now the global list acpi_pci_roots pci_root.c is useless, remove it.

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Cc: Len Brown <lenb@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: linux-acpi@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/acpi/pci_root.c | 25 +++----------------------
 include/acpi/acpi_bus.h |  1 -
 2 files changed, 3 insertions(+), 23 deletions(-)

diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index b80e06e..91ddfd6 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -65,10 +65,6 @@ static struct acpi_scan_handler pci_root_handler = {
 	.detach = acpi_pci_root_remove,
 };
 
-/* Lock to protect both acpi_pci_roots lists */
-static DEFINE_MUTEX(acpi_pci_root_lock);
-static LIST_HEAD(acpi_pci_roots);
-
 static DEFINE_MUTEX(osc_lock);
 
 /**
@@ -423,7 +419,6 @@ static int acpi_pci_root_add(struct acpi_device *device,
 		}
 	}
 
-	INIT_LIST_HEAD(&root->node);
 	root->device = device;
 	root->segment = segment & 0xFFFF;
 	strcpy(acpi_device_name(device), ACPI_PCI_ROOT_DEVICE_NAME);
@@ -501,10 +496,6 @@ static int acpi_pci_root_add(struct acpi_device *device,
 	 * TBD: Need PCI interface for enumeration/configuration of roots.
 	 */
 
-	mutex_lock(&acpi_pci_root_lock);
-	list_add_tail(&root->node, &acpi_pci_roots);
-	mutex_unlock(&acpi_pci_root_lock);
-
 	/*
 	 * Scan the Root Bridge
 	 * --------------------
@@ -518,7 +509,7 @@ static int acpi_pci_root_add(struct acpi_device *device,
 			    "Bus %04x:%02x not present in PCI namespace\n",
 			    root->segment, (unsigned int)root->secondary.start);
 		result = -ENODEV;
-		goto out_del_root;
+		goto end;
 	}
 
 	/* ASPM setting */
@@ -538,20 +529,13 @@ static int acpi_pci_root_add(struct acpi_device *device,
 	if (system_state != SYSTEM_BOOTING) {
 		pcibios_resource_survey_bus(root->bus);
 		pci_assign_unassigned_bus_resources(root->bus);
-	}
-
-	/* need to after hot-added ioapic is registered */
-	if (system_state != SYSTEM_BOOTING)
+		/* need to after hot-added ioapic is registered */
 		pci_enable_bridges(root->bus);
+	}
 
 	pci_bus_add_devices(root->bus);
 	return 1;
 
-out_del_root:
-	mutex_lock(&acpi_pci_root_lock);
-	list_del(&root->node);
-	mutex_unlock(&acpi_pci_root_lock);
-
 end:
 	kfree(root);
 	return result;
@@ -568,9 +552,6 @@ static void acpi_pci_root_remove(struct acpi_device *device)
 
 	pci_remove_root_bus(root->bus);
 
-	mutex_lock(&acpi_pci_root_lock);
-	list_del(&root->node);
-	mutex_unlock(&acpi_pci_root_lock);
 	kfree(root);
 }
 
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index 22ba56e..4eb9a88 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -447,7 +447,6 @@ int register_acpi_bus_type(struct acpi_bus_type *);
 int unregister_acpi_bus_type(struct acpi_bus_type *);
 
 struct acpi_pci_root {
-	struct list_head node;
 	struct acpi_device * device;
 	struct pci_bus *bus;
 	u16 segment;
-- 
1.8.1.2

Re: [PATCH v2, part 1 5/9] ACPI, PCI: remove unused global list acpi_pci_roots in pci_root.c

[Rafael J. Wysocki]

On Tuesday, May 14, 2013 12:08:29 AM Jiang Liu wrote:
> Now the global list acpi_pci_roots pci_root.c is useless, remove it.

Well, are patches [1-4/9] needed for that or does it apply without them?

Rafael


> Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
> Cc: Len Brown <lenb@kernel.org>
> Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
> Cc: linux-acpi@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> ---
>  drivers/acpi/pci_root.c | 25 +++----------------------
>  include/acpi/acpi_bus.h |  1 -
>  2 files changed, 3 insertions(+), 23 deletions(-)
> 
> diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
> index b80e06e..91ddfd6 100644
> --- a/drivers/acpi/pci_root.c
> +++ b/drivers/acpi/pci_root.c
> @@ -65,10 +65,6 @@ static struct acpi_scan_handler pci_root_handler = {
>  	.detach = acpi_pci_root_remove,
>  };
>  
> -/* Lock to protect both acpi_pci_roots lists */
> -static DEFINE_MUTEX(acpi_pci_root_lock);
> -static LIST_HEAD(acpi_pci_roots);
> -
>  static DEFINE_MUTEX(osc_lock);
>  
>  /**
> @@ -423,7 +419,6 @@ static int acpi_pci_root_add(struct acpi_device *device,
>  		}
>  	}
>  
> -	INIT_LIST_HEAD(&root->node);
>  	root->device = device;
>  	root->segment = segment & 0xFFFF;
>  	strcpy(acpi_device_name(device), ACPI_PCI_ROOT_DEVICE_NAME);
> @@ -501,10 +496,6 @@ static int acpi_pci_root_add(struct acpi_device *device,
>  	 * TBD: Need PCI interface for enumeration/configuration of roots.
>  	 */
>  
> -	mutex_lock(&acpi_pci_root_lock);
> -	list_add_tail(&root->node, &acpi_pci_roots);
> -	mutex_unlock(&acpi_pci_root_lock);
> -
>  	/*
>  	 * Scan the Root Bridge
>  	 * --------------------
> @@ -518,7 +509,7 @@ static int acpi_pci_root_add(struct acpi_device *device,
>  			    "Bus %04x:%02x not present in PCI namespace\n",
>  			    root->segment, (unsigned int)root->secondary.start);
>  		result = -ENODEV;
> -		goto out_del_root;
> +		goto end;
>  	}
>  
>  	/* ASPM setting */
> @@ -538,20 +529,13 @@ static int acpi_pci_root_add(struct acpi_device *device,
>  	if (system_state != SYSTEM_BOOTING) {
>  		pcibios_resource_survey_bus(root->bus);
>  		pci_assign_unassigned_bus_resources(root->bus);
> -	}
> -
> -	/* need to after hot-added ioapic is registered */
> -	if (system_state != SYSTEM_BOOTING)
> +		/* need to after hot-added ioapic is registered */
>  		pci_enable_bridges(root->bus);
> +	}
>  
>  	pci_bus_add_devices(root->bus);
>  	return 1;
>  
> -out_del_root:
> -	mutex_lock(&acpi_pci_root_lock);
> -	list_del(&root->node);
> -	mutex_unlock(&acpi_pci_root_lock);
> -
>  end:
>  	kfree(root);
>  	return result;
> @@ -568,9 +552,6 @@ static void acpi_pci_root_remove(struct acpi_device *device)
>  
>  	pci_remove_root_bus(root->bus);
>  
> -	mutex_lock(&acpi_pci_root_lock);
> -	list_del(&root->node);
> -	mutex_unlock(&acpi_pci_root_lock);
>  	kfree(root);
>  }
>  
> diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
> index 22ba56e..4eb9a88 100644
> --- a/include/acpi/acpi_bus.h
> +++ b/include/acpi/acpi_bus.h
> @@ -447,7 +447,6 @@ int register_acpi_bus_type(struct acpi_bus_type *);
>  int unregister_acpi_bus_type(struct acpi_bus_type *);
>  
>  struct acpi_pci_root {
> -	struct list_head node;
>  	struct acpi_device * device;
>  	struct pci_bus *bus;
>  	u16 segment;
> 
-- 
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.

Re: [PATCH v2, part 1 5/9] ACPI, PCI: remove unused global list acpi_pci_roots in pci_root.c

[Liu Jiang]

On Tue 14 May 2013 07:28:45 AM CST, Rafael J. Wysocki wrote:
> On Tuesday, May 14, 2013 12:08:29 AM Jiang Liu wrote:
>> Now the global list acpi_pci_roots pci_root.c is useless, remove it.
>
> Well, are patches [1-4/9] needed for that or does it apply without them?
Hi Rafael,
       This two patches have no dependency on others.
       Thanks!

>
> Rafael
>
>

Re: [PATCH v2, part 1 5/9] ACPI, PCI: remove unused global list acpi_pci_roots in pci_root.c

[Rafael J. Wysocki]

On Tuesday, May 14, 2013 08:41:56 PM Liu Jiang wrote:
> On Tue 14 May 2013 07:28:45 AM CST, Rafael J. Wysocki wrote:
> > On Tuesday, May 14, 2013 12:08:29 AM Jiang Liu wrote:
> >> Now the global list acpi_pci_roots pci_root.c is useless, remove it.
> >
> > Well, are patches [1-4/9] needed for that or does it apply without them?
> Hi Rafael,
>        This two patches have no dependency on others.

Can you please submit them separately, then?

Rafael


-- 
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.

[PATCH v2, part 1 6/9] ACPI, pci_root: use acpi_handle_print() and pr_xxx() to print messages

[Jiang Liu]

Use acpi_handle_print() and pr_xxx() to print messages in pci_root.c.

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Cc: Len Brown <lenb@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: linux-acpi@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/acpi/pci_root.c | 71 ++++++++++++++++++++++---------------------------
 1 file changed, 32 insertions(+), 39 deletions(-)

diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index 91ddfd6..9ced5c3 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -379,23 +379,23 @@ static int acpi_pci_root_add(struct acpi_device *device,
 	struct acpi_pci_root *root;
 	u32 flags, base_flags;
 	bool is_osc_granted = false;
+	acpi_handle hdl = device->handle;
 
 	root = kzalloc(sizeof(struct acpi_pci_root), GFP_KERNEL);
 	if (!root)
 		return -ENOMEM;
 
 	segment = 0;
-	status = acpi_evaluate_integer(device->handle, METHOD_NAME__SEG, NULL,
-				       &segment);
+	status = acpi_evaluate_integer(hdl, METHOD_NAME__SEG, NULL, &segment);
 	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
-		printk(KERN_ERR PREFIX "can't evaluate _SEG\n");
+		acpi_handle_err(hdl, "can't evaluate _SEG\n");
 		result = -ENODEV;
 		goto end;
 	}
 
 	/* Check _CRS first, then _BBN.  If no _BBN, default to zero. */
 	root->secondary.flags = IORESOURCE_BUS;
-	status = try_get_root_bridge_busnr(device->handle, &root->secondary);
+	status = try_get_root_bridge_busnr(hdl, &root->secondary);
 	if (ACPI_FAILURE(status)) {
 		/*
 		 * We need both the start and end of the downstream bus range
@@ -404,16 +404,16 @@ static int acpi_pci_root_add(struct acpi_device *device,
 		 * can do is assume [_BBN-0xFF] or [0-0xFF].
 		 */
 		root->secondary.end = 0xFF;
-		printk(KERN_WARNING FW_BUG PREFIX
-		       "no secondary bus range in _CRS\n");
-		status = acpi_evaluate_integer(device->handle, METHOD_NAME__BBN,
+		acpi_handle_warn(hdl,
+				 FW_BUG "no secondary bus range in _CRS\n");
+		status = acpi_evaluate_integer(hdl, METHOD_NAME__BBN,
 					       NULL, &bus);
 		if (ACPI_SUCCESS(status))
 			root->secondary.start = bus;
 		else if (status == AE_NOT_FOUND)
 			root->secondary.start = 0;
 		else {
-			printk(KERN_ERR PREFIX "can't evaluate _BBN\n");
+			acpi_handle_err(hdl, "can't evaluate _BBN\n");
 			result = -ENODEV;
 			goto end;
 		}
@@ -425,11 +425,11 @@ static int acpi_pci_root_add(struct acpi_device *device,
 	strcpy(acpi_device_class(device), ACPI_PCI_ROOT_CLASS);
 	device->driver_data = root;
 
-	printk(KERN_INFO PREFIX "%s [%s] (domain %04x %pR)\n",
+	pr_info(PREFIX "%s [%s] (domain %04x %pR)\n",
 	       acpi_device_name(device), acpi_device_bid(device),
 	       root->segment, &root->secondary);
 
-	root->mcfg_addr = acpi_pci_root_get_mcfg_addr(device->handle);
+	root->mcfg_addr = acpi_pci_root_get_mcfg_addr(hdl);
 
 	/*
 	 * All supported architectures that use ACPI have support for
@@ -473,7 +473,7 @@ static int acpi_pci_root_add(struct acpi_device *device,
 		dev_info(&device->dev,
 			"Requesting ACPI _OSC control (0x%02x)\n", flags);
 
-		status = acpi_pci_osc_control_set(device->handle, &flags,
+		status = acpi_pci_osc_control_set(hdl, &flags,
 				       OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL);
 		if (ACPI_SUCCESS(status)) {
 			is_osc_granted = true;
@@ -505,9 +505,9 @@ static int acpi_pci_root_add(struct acpi_device *device,
 	 */
 	root->bus = pci_acpi_scan_root(root);
 	if (!root->bus) {
-		printk(KERN_ERR PREFIX
-			    "Bus %04x:%02x not present in PCI namespace\n",
-			    root->segment, (unsigned int)root->secondary.start);
+		acpi_handle_err(hdl,
+			"Bus %04x:%02x not present in PCI namespace\n",
+			root->segment, (unsigned int)root->secondary.start);
 		result = -ENODEV;
 		goto end;
 	}
@@ -517,8 +517,8 @@ static int acpi_pci_root_add(struct acpi_device *device,
 		if (acpi_gbl_FADT.boot_flags & ACPI_FADT_NO_ASPM)
 			pcie_clear_aspm(root->bus);
 	} else {
-		pr_info("ACPI _OSC control for PCIe not granted, "
-			"disabling ASPM\n");
+		acpi_handle_info(hdl,
+			"ACPI _OSC control for PCIe not granted, disabling ASPM\n");
 		pcie_no_aspm();
 	}
 
@@ -571,12 +571,13 @@ static void handle_root_bridge_insertion(acpi_handle handle)
 	struct acpi_device *device;
 
 	if (!acpi_bus_get_device(handle, &device)) {
-		printk(KERN_DEBUG "acpi device exists...\n");
+		acpi_handle_printk(KERN_DEBUG, handle,
+				   "acpi device exists...\n");
 		return;
 	}
 
 	if (acpi_bus_scan(handle))
-		printk(KERN_ERR "cannot add bridge to acpi list\n");
+		acpi_handle_err(handle, "cannot add bridge to acpi list\n");
 }
 
 static void handle_root_bridge_removal(struct acpi_device *device)
@@ -602,7 +603,6 @@ static void handle_root_bridge_removal(struct acpi_device *device)
 static void _handle_hotplug_event_root(struct work_struct *work)
 {
 	struct acpi_pci_root *root;
-	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER };
 	struct acpi_hp_work *hp_work;
 	acpi_handle handle;
 	u32 type;
@@ -613,13 +613,11 @@ static void _handle_hotplug_event_root(struct work_struct *work)
 
 	root = acpi_pci_find_root(handle);
 
-	acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
-
 	switch (type) {
 	case ACPI_NOTIFY_BUS_CHECK:
 		/* bus enumerate */
-		printk(KERN_DEBUG "%s: Bus check notify on %s\n", __func__,
-				 (char *)buffer.pointer);
+		acpi_handle_printk(KERN_DEBUG, handle,
+				   "Bus check notify on %s\n", __func__);
 		if (!root)
 			handle_root_bridge_insertion(handle);
 
@@ -627,27 +625,26 @@ static void _handle_hotplug_event_root(struct work_struct *work)
 
 	case ACPI_NOTIFY_DEVICE_CHECK:
 		/* device check */
-		printk(KERN_DEBUG "%s: Device check notify on %s\n", __func__,
-				 (char *)buffer.pointer);
+		acpi_handle_printk(KERN_DEBUG, handle,
+				   "Device check notify on %s\n", __func__);
 		if (!root)
 			handle_root_bridge_insertion(handle);
 		break;
 
 	case ACPI_NOTIFY_EJECT_REQUEST:
 		/* request device eject */
-		printk(KERN_DEBUG "%s: Device eject notify on %s\n", __func__,
-				 (char *)buffer.pointer);
+		acpi_handle_printk(KERN_DEBUG, handle,
+				   "Device eject notify on %s\n", __func__);
 		if (root)
 			handle_root_bridge_removal(root->device);
 		break;
 	default:
-		printk(KERN_WARNING "notify_handler: unknown event type 0x%x for %s\n",
-				 type, (char *)buffer.pointer);
+		acpi_handle_warn(handle,
+			 "notify_handler: unknown event type 0x%xn", type);
 		break;
 	}
 
 	kfree(hp_work); /* allocated in handle_hotplug_event_bridge */
-	kfree(buffer.pointer);
 }
 
 static void handle_hotplug_event_root(acpi_handle handle, u32 type,
@@ -661,9 +658,6 @@ static acpi_status __init
 find_root_bridges(acpi_handle handle, u32 lvl, void *context, void **rv)
 {
 	acpi_status status;
-	char objname[64];
-	struct acpi_buffer buffer = { .length = sizeof(objname),
-				      .pointer = objname };
 	int *count = (int *)context;
 
 	if (!acpi_is_root_bridge(handle))
@@ -671,16 +665,15 @@ find_root_bridges(acpi_handle handle, u32 lvl, void *context, void **rv)
 
 	(*count)++;
 
-	acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
-
 	status = acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
 					handle_hotplug_event_root, NULL);
 	if (ACPI_FAILURE(status))
-		printk(KERN_DEBUG "acpi root: %s notify handler is not installed, exit status: %u\n",
-				  objname, (unsigned int)status);
+		acpi_handle_printk(KERN_DEBUG, handle,
+			"notify handler is not installed, exit status: %u\n",
+			 (unsigned int)status);
 	else
-		printk(KERN_DEBUG "acpi root: %s notify handler is installed\n",
-				 objname);
+		acpi_handle_printk(KERN_DEBUG, handle,
+				   "notify handler is installed\n");
 
 	return AE_OK;
 }
-- 
1.8.1.2

Re: [PATCH v2, part 1 6/9] ACPI, pci_root: use acpi_handle_print() and pr_xxx() to print messages

[Rafael J. Wysocki]

On Tuesday, May 14, 2013 12:08:30 AM Jiang Liu wrote:
> Use acpi_handle_print() and pr_xxx() to print messages in pci_root.c.
> 
> Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
> Cc: Len Brown <lenb@kernel.org>
> Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
> Cc: linux-acpi@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> ---
>  drivers/acpi/pci_root.c | 71 ++++++++++++++++++++++---------------------------
>  1 file changed, 32 insertions(+), 39 deletions(-)
> 
> diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
> index 91ddfd6..9ced5c3 100644
> --- a/drivers/acpi/pci_root.c
> +++ b/drivers/acpi/pci_root.c
> @@ -379,23 +379,23 @@ static int acpi_pci_root_add(struct acpi_device *device,
>  	struct acpi_pci_root *root;
>  	u32 flags, base_flags;
>  	bool is_osc_granted = false;
> +	acpi_handle hdl = device->handle;

The usual way is to call it 'handle'.  Any reason why not to do it here too?

>  	root = kzalloc(sizeof(struct acpi_pci_root), GFP_KERNEL);
>  	if (!root)
>  		return -ENOMEM;
>  
>  	segment = 0;
> -	status = acpi_evaluate_integer(device->handle, METHOD_NAME__SEG, NULL,
> -				       &segment);
> +	status = acpi_evaluate_integer(hdl, METHOD_NAME__SEG, NULL, &segment);
>  	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
> -		printk(KERN_ERR PREFIX "can't evaluate _SEG\n");
> +		acpi_handle_err(hdl, "can't evaluate _SEG\n");
>  		result = -ENODEV;
>  		goto end;
>  	}
>  
>  	/* Check _CRS first, then _BBN.  If no _BBN, default to zero. */
>  	root->secondary.flags = IORESOURCE_BUS;
> -	status = try_get_root_bridge_busnr(device->handle, &root->secondary);
> +	status = try_get_root_bridge_busnr(hdl, &root->secondary);
>  	if (ACPI_FAILURE(status)) {
>  		/*
>  		 * We need both the start and end of the downstream bus range
> @@ -404,16 +404,16 @@ static int acpi_pci_root_add(struct acpi_device *device,
>  		 * can do is assume [_BBN-0xFF] or [0-0xFF].
>  		 */
>  		root->secondary.end = 0xFF;
> -		printk(KERN_WARNING FW_BUG PREFIX
> -		       "no secondary bus range in _CRS\n");
> -		status = acpi_evaluate_integer(device->handle, METHOD_NAME__BBN,
> +		acpi_handle_warn(hdl,
> +				 FW_BUG "no secondary bus range in _CRS\n");
> +		status = acpi_evaluate_integer(hdl, METHOD_NAME__BBN,
>  					       NULL, &bus);
>  		if (ACPI_SUCCESS(status))
>  			root->secondary.start = bus;
>  		else if (status == AE_NOT_FOUND)
>  			root->secondary.start = 0;
>  		else {
> -			printk(KERN_ERR PREFIX "can't evaluate _BBN\n");
> +			acpi_handle_err(hdl, "can't evaluate _BBN\n");
>  			result = -ENODEV;
>  			goto end;
>  		}
> @@ -425,11 +425,11 @@ static int acpi_pci_root_add(struct acpi_device *device,
>  	strcpy(acpi_device_class(device), ACPI_PCI_ROOT_CLASS);
>  	device->driver_data = root;
>  
> -	printk(KERN_INFO PREFIX "%s [%s] (domain %04x %pR)\n",
> +	pr_info(PREFIX "%s [%s] (domain %04x %pR)\n",
>  	       acpi_device_name(device), acpi_device_bid(device),
>  	       root->segment, &root->secondary);
>  
> -	root->mcfg_addr = acpi_pci_root_get_mcfg_addr(device->handle);
> +	root->mcfg_addr = acpi_pci_root_get_mcfg_addr(hdl);
>  
>  	/*
>  	 * All supported architectures that use ACPI have support for
> @@ -473,7 +473,7 @@ static int acpi_pci_root_add(struct acpi_device *device,
>  		dev_info(&device->dev,
>  			"Requesting ACPI _OSC control (0x%02x)\n", flags);
>  
> -		status = acpi_pci_osc_control_set(device->handle, &flags,
> +		status = acpi_pci_osc_control_set(hdl, &flags,
>  				       OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL);
>  		if (ACPI_SUCCESS(status)) {
>  			is_osc_granted = true;
> @@ -505,9 +505,9 @@ static int acpi_pci_root_add(struct acpi_device *device,
>  	 */
>  	root->bus = pci_acpi_scan_root(root);
>  	if (!root->bus) {
> -		printk(KERN_ERR PREFIX
> -			    "Bus %04x:%02x not present in PCI namespace\n",
> -			    root->segment, (unsigned int)root->secondary.start);
> +		acpi_handle_err(hdl,
> +			"Bus %04x:%02x not present in PCI namespace\n",
> +			root->segment, (unsigned int)root->secondary.start);
>  		result = -ENODEV;
>  		goto end;
>  	}
> @@ -517,8 +517,8 @@ static int acpi_pci_root_add(struct acpi_device *device,
>  		if (acpi_gbl_FADT.boot_flags & ACPI_FADT_NO_ASPM)
>  			pcie_clear_aspm(root->bus);
>  	} else {
> -		pr_info("ACPI _OSC control for PCIe not granted, "
> -			"disabling ASPM\n");
> +		acpi_handle_info(hdl,
> +			"ACPI _OSC control for PCIe not granted, disabling ASPM\n");
>  		pcie_no_aspm();
>  	}
>  
> @@ -571,12 +571,13 @@ static void handle_root_bridge_insertion(acpi_handle handle)
>  	struct acpi_device *device;
>  
>  	if (!acpi_bus_get_device(handle, &device)) {
> -		printk(KERN_DEBUG "acpi device exists...\n");
> +		acpi_handle_printk(KERN_DEBUG, handle,
> +				   "acpi device exists...\n");

Do we have acpi_handle_dbg()?  If so, why don't you use it here? (And below.)
If not, why don't you add it and use it here (and below)?

>  		return;
>  	}
>  
>  	if (acpi_bus_scan(handle))
> -		printk(KERN_ERR "cannot add bridge to acpi list\n");
> +		acpi_handle_err(handle, "cannot add bridge to acpi list\n");
>  }
>  
>  static void handle_root_bridge_removal(struct acpi_device *device)
> @@ -602,7 +603,6 @@ static void handle_root_bridge_removal(struct acpi_device *device)
>  static void _handle_hotplug_event_root(struct work_struct *work)
>  {
>  	struct acpi_pci_root *root;
> -	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER };
>  	struct acpi_hp_work *hp_work;
>  	acpi_handle handle;
>  	u32 type;
> @@ -613,13 +613,11 @@ static void _handle_hotplug_event_root(struct work_struct *work)
>  
>  	root = acpi_pci_find_root(handle);
>  
> -	acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
> -
>  	switch (type) {
>  	case ACPI_NOTIFY_BUS_CHECK:
>  		/* bus enumerate */
> -		printk(KERN_DEBUG "%s: Bus check notify on %s\n", __func__,
> -				 (char *)buffer.pointer);
> +		acpi_handle_printk(KERN_DEBUG, handle,
> +				   "Bus check notify on %s\n", __func__);
>  		if (!root)
>  			handle_root_bridge_insertion(handle);
>  
> @@ -627,27 +625,26 @@ static void _handle_hotplug_event_root(struct work_struct *work)
>  
>  	case ACPI_NOTIFY_DEVICE_CHECK:
>  		/* device check */
> -		printk(KERN_DEBUG "%s: Device check notify on %s\n", __func__,
> -				 (char *)buffer.pointer);
> +		acpi_handle_printk(KERN_DEBUG, handle,
> +				   "Device check notify on %s\n", __func__);
>  		if (!root)
>  			handle_root_bridge_insertion(handle);
>  		break;
>  
>  	case ACPI_NOTIFY_EJECT_REQUEST:
>  		/* request device eject */
> -		printk(KERN_DEBUG "%s: Device eject notify on %s\n", __func__,
> -				 (char *)buffer.pointer);
> +		acpi_handle_printk(KERN_DEBUG, handle,
> +				   "Device eject notify on %s\n", __func__);
>  		if (root)
>  			handle_root_bridge_removal(root->device);
>  		break;
>  	default:
> -		printk(KERN_WARNING "notify_handler: unknown event type 0x%x for %s\n",
> -				 type, (char *)buffer.pointer);
> +		acpi_handle_warn(handle,
> +			 "notify_handler: unknown event type 0x%xn", type);
>  		break;
>  	}
>  
>  	kfree(hp_work); /* allocated in handle_hotplug_event_bridge */
> -	kfree(buffer.pointer);
>  }
>  
>  static void handle_hotplug_event_root(acpi_handle handle, u32 type,
> @@ -661,9 +658,6 @@ static acpi_status __init
>  find_root_bridges(acpi_handle handle, u32 lvl, void *context, void **rv)
>  {
>  	acpi_status status;
> -	char objname[64];
> -	struct acpi_buffer buffer = { .length = sizeof(objname),
> -				      .pointer = objname };
>  	int *count = (int *)context;
>  
>  	if (!acpi_is_root_bridge(handle))
> @@ -671,16 +665,15 @@ find_root_bridges(acpi_handle handle, u32 lvl, void *context, void **rv)
>  
>  	(*count)++;
>  
> -	acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
> -
>  	status = acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
>  					handle_hotplug_event_root, NULL);
>  	if (ACPI_FAILURE(status))
> -		printk(KERN_DEBUG "acpi root: %s notify handler is not installed, exit status: %u\n",
> -				  objname, (unsigned int)status);
> +		acpi_handle_printk(KERN_DEBUG, handle,
> +			"notify handler is not installed, exit status: %u\n",
> +			 (unsigned int)status);
>  	else
> -		printk(KERN_DEBUG "acpi root: %s notify handler is installed\n",
> -				 objname);
> +		acpi_handle_printk(KERN_DEBUG, handle,
> +				   "notify handler is installed\n");
>  
>  	return AE_OK;
>  }

Thanks,
Rafael


-- 
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.

Re: [PATCH v2, part 1 6/9] ACPI, pci_root: use acpi_handle_print() and pr_xxx() to print messages

[Liu Jiang]

On 05/14/2013 07:27 AM, Rafael J. Wysocki wrote:
> On Tuesday, May 14, 2013 12:08:30 AM Jiang Liu wrote:
>> Use acpi_handle_print() and pr_xxx() to print messages in pci_root.c.
>>
>> Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
>> Cc: Len Brown <lenb@kernel.org>
>> Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
>> Cc: linux-acpi@vger.kernel.org
>> Cc: linux-kernel@vger.kernel.org
>> ---
>>   drivers/acpi/pci_root.c | 71 ++++++++++++++++++++++---------------------------
>>   1 file changed, 32 insertions(+), 39 deletions(-)
>>
>> diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
>> index 91ddfd6..9ced5c3 100644
>> --- a/drivers/acpi/pci_root.c
>> +++ b/drivers/acpi/pci_root.c
>> @@ -379,23 +379,23 @@ static int acpi_pci_root_add(struct acpi_device *device,
>>   	struct acpi_pci_root *root;
>>   	u32 flags, base_flags;
>>   	bool is_osc_granted = false;
>> +	acpi_handle hdl = device->handle;
> The usual way is to call it 'handle'.  Any reason why not to do it here
Hi Rafael,
     Just to avoid splitting some code into two lines, I could to use 
"handle"
if preferred.
>>   	root = kzalloc(sizeof(struct acpi_pci_root), GFP_KERNEL);
>>   	if (!root)
>>   		return -ENOMEM;
>>   
>>   	segment = 0;
>> -	status = acpi_evaluate_integer(device->handle, METHOD_NAME__SEG, NULL,
>> -				       &segment);
>> +	status = acpi_evaluate_integer(hdl, METHOD_NAME__SEG, NULL, &segment);
>>   	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
>> -		printk(KERN_ERR PREFIX "can't evaluate _SEG\n");
>> +		acpi_handle_err(hdl, "can't evaluate _SEG\n");
>>   		result = -ENODEV;
>>   		goto end;
>>   	}
>>   
>>   	/* Check _CRS first, then _BBN.  If no _BBN, default to zero. */
>>   	root->secondary.flags = IORESOURCE_BUS;
>> -	status = try_get_root_bridge_busnr(device->handle, &root->secondary);
>> +	status = try_get_root_bridge_busnr(hdl, &root->secondary);
>>   	if (ACPI_FAILURE(status)) {
>>   		/*
>>   		 * We need both the start and end of the downstream bus range
>> @@ -404,16 +404,16 @@ static int acpi_pci_root_add(struct acpi_device *device,
>>   		 * can do is assume [_BBN-0xFF] or [0-0xFF].
>>   		 */
>>   		root->secondary.end = 0xFF;
>> -		printk(KERN_WARNING FW_BUG PREFIX
>> -		       "no secondary bus range in _CRS\n");
>> -		status = acpi_evaluate_integer(device->handle, METHOD_NAME__BBN,
>> +		acpi_handle_warn(hdl,
>> +				 FW_BUG "no secondary bus range in _CRS\n");
>> +		status = acpi_evaluate_integer(hdl, METHOD_NAME__BBN,
>>   					       NULL, &bus);
>>   		if (ACPI_SUCCESS(status))
>>   			root->secondary.start = bus;
>>   		else if (status == AE_NOT_FOUND)
>>   			root->secondary.start = 0;
>>   		else {
>> -			printk(KERN_ERR PREFIX "can't evaluate _BBN\n");
>> +			acpi_handle_err(hdl, "can't evaluate _BBN\n");
>>   			result = -ENODEV;
>>   			goto end;
>>   		}
>> @@ -425,11 +425,11 @@ static int acpi_pci_root_add(struct acpi_device *device,
>>   	strcpy(acpi_device_class(device), ACPI_PCI_ROOT_CLASS);
>>   	device->driver_data = root;
>>   
>> -	printk(KERN_INFO PREFIX "%s [%s] (domain %04x %pR)\n",
>> +	pr_info(PREFIX "%s [%s] (domain %04x %pR)\n",
>>   	       acpi_device_name(device), acpi_device_bid(device),
>>   	       root->segment, &root->secondary);
>>   
>> -	root->mcfg_addr = acpi_pci_root_get_mcfg_addr(device->handle);
>> +	root->mcfg_addr = acpi_pci_root_get_mcfg_addr(hdl);
>>   
>>   	/*
>>   	 * All supported architectures that use ACPI have support for
>> @@ -473,7 +473,7 @@ static int acpi_pci_root_add(struct acpi_device *device,
>>   		dev_info(&device->dev,
>>   			"Requesting ACPI _OSC control (0x%02x)\n", flags);
>>   
>> -		status = acpi_pci_osc_control_set(device->handle, &flags,
>> +		status = acpi_pci_osc_control_set(hdl, &flags,
>>   				       OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL);
>>   		if (ACPI_SUCCESS(status)) {
>>   			is_osc_granted = true;
>> @@ -505,9 +505,9 @@ static int acpi_pci_root_add(struct acpi_device *device,
>>   	 */
>>   	root->bus = pci_acpi_scan_root(root);
>>   	if (!root->bus) {
>> -		printk(KERN_ERR PREFIX
>> -			    "Bus %04x:%02x not present in PCI namespace\n",
>> -			    root->segment, (unsigned int)root->secondary.start);
>> +		acpi_handle_err(hdl,
>> +			"Bus %04x:%02x not present in PCI namespace\n",
>> +			root->segment, (unsigned int)root->secondary.start);
>>   		result = -ENODEV;
>>   		goto end;
>>   	}
>> @@ -517,8 +517,8 @@ static int acpi_pci_root_add(struct acpi_device *device,
>>   		if (acpi_gbl_FADT.boot_flags & ACPI_FADT_NO_ASPM)
>>   			pcie_clear_aspm(root->bus);
>>   	} else {
>> -		pr_info("ACPI _OSC control for PCIe not granted, "
>> -			"disabling ASPM\n");
>> +		acpi_handle_info(hdl,
>> +			"ACPI _OSC control for PCIe not granted, disabling ASPM\n");
>>   		pcie_no_aspm();
>>   	}
>>   
>> @@ -571,12 +571,13 @@ static void handle_root_bridge_insertion(acpi_handle handle)
>>   	struct acpi_device *device;
>>   
>>   	if (!acpi_bus_get_device(handle, &device)) {
>> -		printk(KERN_DEBUG "acpi device exists...\n");
>> +		acpi_handle_printk(KERN_DEBUG, handle,
>> +				   "acpi device exists...\n");
> Do we have acpi_handle_dbg()?  If so, why don't you use it here? (And below.)
> If not, why don't you add it and use it here (and below)?
acpi_handle_dbg() only generates message if CONFIG_DEBUG is enabled,
so use pci_handle_printk(KERN_DEBUG, xxx) to keep original behavior.
Thanks,
Gerry
>
>>   		return;
>>   	}
>>   
>>   	if (acpi_bus_scan(handle))
>> -		printk(KERN_ERR "cannot add bridge to acpi list\n");
>> +		acpi_handle_err(handle, "cannot add bridge to acpi list\n");
>>   }
>>   
>>   static void handle_root_bridge_removal(struct acpi_device *device)
>> @@ -602,7 +603,6 @@ static void handle_root_bridge_removal(struct acpi_device *device)
>>   static void _handle_hotplug_event_root(struct work_struct *work)
>>   {
>>   	struct acpi_pci_root *root;
>> -	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER };
>>   	struct acpi_hp_work *hp_work;
>>   	acpi_handle handle;
>>   	u32 type;
>> @@ -613,13 +613,11 @@ static void _handle_hotplug_event_root(struct work_struct *work)
>>   
>>   	root = acpi_pci_find_root(handle);
>>   
>> -	acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
>> -
>>   	switch (type) {
>>   	case ACPI_NOTIFY_BUS_CHECK:
>>   		/* bus enumerate */
>> -		printk(KERN_DEBUG "%s: Bus check notify on %s\n", __func__,
>> -				 (char *)buffer.pointer);
>> +		acpi_handle_printk(KERN_DEBUG, handle,
>> +				   "Bus check notify on %s\n", __func__);
>>   		if (!root)
>>   			handle_root_bridge_insertion(handle);
>>   
>> @@ -627,27 +625,26 @@ static void _handle_hotplug_event_root(struct work_struct *work)
>>   
>>   	case ACPI_NOTIFY_DEVICE_CHECK:
>>   		/* device check */
>> -		printk(KERN_DEBUG "%s: Device check notify on %s\n", __func__,
>> -				 (char *)buffer.pointer);
>> +		acpi_handle_printk(KERN_DEBUG, handle,
>> +				   "Device check notify on %s\n", __func__);
>>   		if (!root)
>>   			handle_root_bridge_insertion(handle);
>>   		break;
>>   
>>   	case ACPI_NOTIFY_EJECT_REQUEST:
>>   		/* request device eject */
>> -		printk(KERN_DEBUG "%s: Device eject notify on %s\n", __func__,
>> -				 (char *)buffer.pointer);
>> +		acpi_handle_printk(KERN_DEBUG, handle,
>> +				   "Device eject notify on %s\n", __func__);
>>   		if (root)
>>   			handle_root_bridge_removal(root->device);
>>   		break;
>>   	default:
>> -		printk(KERN_WARNING "notify_handler: unknown event type 0x%x for %s\n",
>> -				 type, (char *)buffer.pointer);
>> +		acpi_handle_warn(handle,
>> +			 "notify_handler: unknown event type 0x%xn", type);
>>   		break;
>>   	}
>>   
>>   	kfree(hp_work); /* allocated in handle_hotplug_event_bridge */
>> -	kfree(buffer.pointer);
>>   }
>>   
>>   static void handle_hotplug_event_root(acpi_handle handle, u32 type,
>> @@ -661,9 +658,6 @@ static acpi_status __init
>>   find_root_bridges(acpi_handle handle, u32 lvl, void *context, void **rv)
>>   {
>>   	acpi_status status;
>> -	char objname[64];
>> -	struct acpi_buffer buffer = { .length = sizeof(objname),
>> -				      .pointer = objname };
>>   	int *count = (int *)context;
>>   
>>   	if (!acpi_is_root_bridge(handle))
>> @@ -671,16 +665,15 @@ find_root_bridges(acpi_handle handle, u32 lvl, void *context, void **rv)
>>   
>>   	(*count)++;
>>   
>> -	acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
>> -
>>   	status = acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
>>   					handle_hotplug_event_root, NULL);
>>   	if (ACPI_FAILURE(status))
>> -		printk(KERN_DEBUG "acpi root: %s notify handler is not installed, exit status: %u\n",
>> -				  objname, (unsigned int)status);
>> +		acpi_handle_printk(KERN_DEBUG, handle,
>> +			"notify handler is not installed, exit status: %u\n",
>> +			 (unsigned int)status);
>>   	else
>> -		printk(KERN_DEBUG "acpi root: %s notify handler is installed\n",
>> -				 objname);
>> +		acpi_handle_printk(KERN_DEBUG, handle,
>> +				   "notify handler is installed\n");
>>   
>>   	return AE_OK;
>>   }
> Thanks,
> Rafael
>
>

Re: [PATCH v2, part 1 6/9] ACPI, pci_root: use acpi_handle_print() and pr_xxx() to print messages

[Gu Zheng]

On 05/14/2013 12:08 AM, Jiang Liu wrote:

> Use acpi_handle_print() and pr_xxx() to print messages in pci_root.c.
> 
> Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
> Cc: Len Brown <lenb@kernel.org>
> Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
> Cc: linux-acpi@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> ---
>  drivers/acpi/pci_root.c | 71 ++++++++++++++++++++++---------------------------
>  1 file changed, 32 insertions(+), 39 deletions(-)
> 
> diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
> index 91ddfd6..9ced5c3 100644
> --- a/drivers/acpi/pci_root.c
> +++ b/drivers/acpi/pci_root.c
> @@ -379,23 +379,23 @@ static int acpi_pci_root_add(struct acpi_device *device,
>  	struct acpi_pci_root *root;
>  	u32 flags, base_flags;
>  	bool is_osc_granted = false;
> +	acpi_handle hdl = device->handle;
>  
>  	root = kzalloc(sizeof(struct acpi_pci_root), GFP_KERNEL);
>  	if (!root)
>  		return -ENOMEM;
>  
>  	segment = 0;
> -	status = acpi_evaluate_integer(device->handle, METHOD_NAME__SEG, NULL,
> -				       &segment);
> +	status = acpi_evaluate_integer(hdl, METHOD_NAME__SEG, NULL, &segment);
>  	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
> -		printk(KERN_ERR PREFIX "can't evaluate _SEG\n");
> +		acpi_handle_err(hdl, "can't evaluate _SEG\n");
>  		result = -ENODEV;
>  		goto end;
>  	}
>  
>  	/* Check _CRS first, then _BBN.  If no _BBN, default to zero. */
>  	root->secondary.flags = IORESOURCE_BUS;
> -	status = try_get_root_bridge_busnr(device->handle, &root->secondary);
> +	status = try_get_root_bridge_busnr(hdl, &root->secondary);
>  	if (ACPI_FAILURE(status)) {
>  		/*
>  		 * We need both the start and end of the downstream bus range
> @@ -404,16 +404,16 @@ static int acpi_pci_root_add(struct acpi_device *device,
>  		 * can do is assume [_BBN-0xFF] or [0-0xFF].
>  		 */
>  		root->secondary.end = 0xFF;
> -		printk(KERN_WARNING FW_BUG PREFIX
> -		       "no secondary bus range in _CRS\n");
> -		status = acpi_evaluate_integer(device->handle, METHOD_NAME__BBN,
> +		acpi_handle_warn(hdl,
> +				 FW_BUG "no secondary bus range in _CRS\n");
> +		status = acpi_evaluate_integer(hdl, METHOD_NAME__BBN,
>  					       NULL, &bus);
>  		if (ACPI_SUCCESS(status))
>  			root->secondary.start = bus;
>  		else if (status == AE_NOT_FOUND)
>  			root->secondary.start = 0;
>  		else {
> -			printk(KERN_ERR PREFIX "can't evaluate _BBN\n");
> +			acpi_handle_err(hdl, "can't evaluate _BBN\n");
>  			result = -ENODEV;
>  			goto end;
>  		}
> @@ -425,11 +425,11 @@ static int acpi_pci_root_add(struct acpi_device *device,
>  	strcpy(acpi_device_class(device), ACPI_PCI_ROOT_CLASS);
>  	device->driver_data = root;
>  
> -	printk(KERN_INFO PREFIX "%s [%s] (domain %04x %pR)\n",
> +	pr_info(PREFIX "%s [%s] (domain %04x %pR)\n",
>  	       acpi_device_name(device), acpi_device_bid(device),
>  	       root->segment, &root->secondary);
>  
> -	root->mcfg_addr = acpi_pci_root_get_mcfg_addr(device->handle);
> +	root->mcfg_addr = acpi_pci_root_get_mcfg_addr(hdl);
>  
>  	/*
>  	 * All supported architectures that use ACPI have support for
> @@ -473,7 +473,7 @@ static int acpi_pci_root_add(struct acpi_device *device,
>  		dev_info(&device->dev,
>  			"Requesting ACPI _OSC control (0x%02x)\n", flags);
>  
> -		status = acpi_pci_osc_control_set(device->handle, &flags,
> +		status = acpi_pci_osc_control_set(hdl, &flags,
>  				       OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL);
>  		if (ACPI_SUCCESS(status)) {
>  			is_osc_granted = true;
> @@ -505,9 +505,9 @@ static int acpi_pci_root_add(struct acpi_device *device,
>  	 */
>  	root->bus = pci_acpi_scan_root(root);
>  	if (!root->bus) {
> -		printk(KERN_ERR PREFIX
> -			    "Bus %04x:%02x not present in PCI namespace\n",
> -			    root->segment, (unsigned int)root->secondary.start);
> +		acpi_handle_err(hdl,
> +			"Bus %04x:%02x not present in PCI namespace\n",
> +			root->segment, (unsigned int)root->secondary.start);
>  		result = -ENODEV;
>  		goto end;
>  	}
> @@ -517,8 +517,8 @@ static int acpi_pci_root_add(struct acpi_device *device,
>  		if (acpi_gbl_FADT.boot_flags & ACPI_FADT_NO_ASPM)
>  			pcie_clear_aspm(root->bus);
>  	} else {
> -		pr_info("ACPI _OSC control for PCIe not granted, "
> -			"disabling ASPM\n");
> +		acpi_handle_info(hdl,
> +			"ACPI _OSC control for PCIe not granted, disabling ASPM\n");
>  		pcie_no_aspm();
>  	}
>  
> @@ -571,12 +571,13 @@ static void handle_root_bridge_insertion(acpi_handle handle)
>  	struct acpi_device *device;
>  
>  	if (!acpi_bus_get_device(handle, &device)) {
> -		printk(KERN_DEBUG "acpi device exists...\n");
> +		acpi_handle_printk(KERN_DEBUG, handle,
> +				   "acpi device exists...\n");
>  		return;
>  	}
>  
>  	if (acpi_bus_scan(handle))
> -		printk(KERN_ERR "cannot add bridge to acpi list\n");
> +		acpi_handle_err(handle, "cannot add bridge to acpi list\n");
>  }
>  
>  static void handle_root_bridge_removal(struct acpi_device *device)
> @@ -602,7 +603,6 @@ static void handle_root_bridge_removal(struct acpi_device *device)
>  static void _handle_hotplug_event_root(struct work_struct *work)
>  {
>  	struct acpi_pci_root *root;
> -	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER };
>  	struct acpi_hp_work *hp_work;
>  	acpi_handle handle;
>  	u32 type;
> @@ -613,13 +613,11 @@ static void _handle_hotplug_event_root(struct work_struct *work)
>  
>  	root = acpi_pci_find_root(handle);
>  
> -	acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
> -
>  	switch (type) {
>  	case ACPI_NOTIFY_BUS_CHECK:
>  		/* bus enumerate */
> -		printk(KERN_DEBUG "%s: Bus check notify on %s\n", __func__,
> -				 (char *)buffer.pointer);
> +		acpi_handle_printk(KERN_DEBUG, handle,
> +				   "Bus check notify on %s\n", __func__);
>  		if (!root)
>  			handle_root_bridge_insertion(handle);
>  
> @@ -627,27 +625,26 @@ static void _handle_hotplug_event_root(struct work_struct *work)
>  
>  	case ACPI_NOTIFY_DEVICE_CHECK:
>  		/* device check */
> -		printk(KERN_DEBUG "%s: Device check notify on %s\n", __func__,
> -				 (char *)buffer.pointer);
> +		acpi_handle_printk(KERN_DEBUG, handle,
> +				   "Device check notify on %s\n", __func__);
>  		if (!root)
>  			handle_root_bridge_insertion(handle);
>  		break;
>  
>  	case ACPI_NOTIFY_EJECT_REQUEST:
>  		/* request device eject */
> -		printk(KERN_DEBUG "%s: Device eject notify on %s\n", __func__,
> -				 (char *)buffer.pointer);
> +		acpi_handle_printk(KERN_DEBUG, handle,
> +				   "Device eject notify on %s\n", __func__);
>  		if (root)
>  			handle_root_bridge_removal(root->device);
>  		break;
>  	default:
> -		printk(KERN_WARNING "notify_handler: unknown event type 0x%x for %s\n",
> -				 type, (char *)buffer.pointer);
> +		acpi_handle_warn(handle,
> +			 "notify_handler: unknown event type 0x%xn", type);

Here may be "0x%x\n".

A better way I think is that we can change the format string of printk in acpi_handle_printk()
from "%sACPI: %s: %pV"  to "%sACPI: %s: %pV \n", so that there is no need to append the '\n' in the
format string when we call acpi_handle_printk().

Thanks,
Gu
 

>  		break;
>  	}
>  
>  	kfree(hp_work); /* allocated in handle_hotplug_event_bridge */
> -	kfree(buffer.pointer);
>  }
>  
>  static void handle_hotplug_event_root(acpi_handle handle, u32 type,
> @@ -661,9 +658,6 @@ static acpi_status __init
>  find_root_bridges(acpi_handle handle, u32 lvl, void *context, void **rv)
>  {
>  	acpi_status status;
> -	char objname[64];
> -	struct acpi_buffer buffer = { .length = sizeof(objname),
> -				      .pointer = objname };
>  	int *count = (int *)context;
>  
>  	if (!acpi_is_root_bridge(handle))
> @@ -671,16 +665,15 @@ find_root_bridges(acpi_handle handle, u32 lvl, void *context, void **rv)
>  
>  	(*count)++;
>  
> -	acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
> -
>  	status = acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
>  					handle_hotplug_event_root, NULL);
>  	if (ACPI_FAILURE(status))
> -		printk(KERN_DEBUG "acpi root: %s notify handler is not installed, exit status: %u\n",
> -				  objname, (unsigned int)status);
> +		acpi_handle_printk(KERN_DEBUG, handle,
> +			"notify handler is not installed, exit status: %u\n",
> +			 (unsigned int)status);
>  	else
> -		printk(KERN_DEBUG "acpi root: %s notify handler is installed\n",
> -				 objname);
> +		acpi_handle_printk(KERN_DEBUG, handle,
> +				   "notify handler is installed\n");
>  
>  	return AE_OK;
>  }

[PATCH v2, part 1 7/9] PCI, IA64: minor code clean up

[Jiang Liu]

pci_scan_root_bus() already set bus->sysdata, so no need to explicitly
set it again in function sn_pci_controller_fixup();

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: linux-ia64@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
 arch/ia64/sn/kernel/io_init.c | 11 +----------
 1 file changed, 1 insertion(+), 10 deletions(-)

diff --git a/arch/ia64/sn/kernel/io_init.c b/arch/ia64/sn/kernel/io_init.c
index 238e2c5..e2c7733 100644
--- a/arch/ia64/sn/kernel/io_init.c
+++ b/arch/ia64/sn/kernel/io_init.c
@@ -326,16 +326,7 @@ sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus)
 	bus = pci_scan_root_bus(NULL, busnum, &pci_root_ops, controller,
 				&resources);
  	if (bus == NULL)
- 		goto error_return; /* error, or bus already scanned */
-
-	bus->sysdata = controller;
-
-	return;
-
-error_return:
-
-	kfree(controller);
-	return;
+		kfree(controller);
 }
 
 /*
-- 
1.8.1.2

[PATCH v2, part 1 8/9] PCI: make PCI host bridge/bus creating and destroying logic symmetric

[Jiang Liu]

This patch makes PCI host bridge/bus creating and destroying logic
symmetric by using device_initialize()/device_add()/device_del()/put_device()
pairs as discussed in thread at:
http://comments.gmane.org/gmane.linux.kernel.pci/22073

It also fixes a bug in error recovery path in pci_create_root_bus()
which may kfree() an in-use host bridge object.

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Cc: Yinghai Lu <yinghai@kernel.org>
---
 drivers/pci/probe.c  | 84 +++++++++++++++++++++++-----------------------------
 drivers/pci/remove.c |  3 +-
 2 files changed, 39 insertions(+), 48 deletions(-)

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index bc075a3..a2617c2 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -451,7 +451,7 @@ void pci_read_bridge_bases(struct pci_bus *child)
 	}
 }
 
-static struct pci_bus * pci_alloc_bus(void)
+static struct pci_bus *pci_alloc_bus(struct pci_ops *ops, void *sd, int bus)
 {
 	struct pci_bus *b;
 
@@ -464,10 +464,32 @@ static struct pci_bus * pci_alloc_bus(void)
 		INIT_LIST_HEAD(&b->resources);
 		b->max_bus_speed = PCI_SPEED_UNKNOWN;
 		b->cur_bus_speed = PCI_SPEED_UNKNOWN;
+		b->sysdata = sd;
+		b->ops = ops;
+		b->number = bus;
+		b->busn_res.start = bus;
+		b->busn_res.end = 0xff;
+		b->busn_res.flags = IORESOURCE_BUS;
+		b->dev.class = &pcibus_class;
+		dev_set_name(&b->dev, "%04x:%02x", pci_domain_nr(b), bus);
+		device_initialize(&b->dev);
 	}
+
 	return b;
 }
 
+static void pci_release_host_bridge_dev(struct device *dev)
+{
+	struct pci_host_bridge *bridge = to_pci_host_bridge(dev);
+
+	if (bridge->release_fn)
+		bridge->release_fn(bridge);
+
+	pci_free_resource_list(&bridge->windows);
+
+	kfree(bridge);
+}
+
 static struct pci_host_bridge *pci_alloc_host_bridge(struct pci_bus *b)
 {
 	struct pci_host_bridge *bridge;
@@ -476,6 +498,10 @@ static struct pci_host_bridge *pci_alloc_host_bridge(struct pci_bus *b)
 	if (bridge) {
 		INIT_LIST_HEAD(&bridge->windows);
 		bridge->bus = b;
+		bridge->dev.release = pci_release_host_bridge_dev;
+		dev_set_name(&bridge->dev, "pci%04x:%02x",
+			     pci_domain_nr(b), b->number);
+		device_initialize(&bridge->dev);
 	}
 
 	return bridge;
@@ -628,28 +654,13 @@ static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent,
 	/*
 	 * Allocate a new bus, and inherit stuff from the parent..
 	 */
-	child = pci_alloc_bus();
+	child = pci_alloc_bus(parent->ops, parent->sysdata, busnr);
 	if (!child)
 		return NULL;
 
 	child->parent = parent;
-	child->ops = parent->ops;
-	child->sysdata = parent->sysdata;
 	child->bus_flags = parent->bus_flags;
-
-	/* initialize some portions of the bus device, but don't register it
-	 * now as the parent is not properly set up yet.
-	 */
-	child->dev.class = &pcibus_class;
-	dev_set_name(&child->dev, "%04x:%02x", pci_domain_nr(child), busnr);
-
-	/*
-	 * Set up the primary, secondary and subordinate
-	 * bus numbers.
-	 */
-	child->number = child->busn_res.start = busnr;
 	child->primary = parent->busn_res.start;
-	child->busn_res.end = 0xff;
 
 	if (!bridge) {
 		child->dev.parent = parent->bridge;
@@ -670,7 +681,7 @@ static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent,
 	bridge->subordinate = child;
 
 add_dev:
-	ret = device_register(&child->dev);
+	ret = device_add(&child->dev);
 	WARN_ON(ret < 0);
 
 	pcibios_add_bus(child);
@@ -1190,18 +1201,6 @@ int pci_cfg_space_size(struct pci_dev *dev)
 	return PCI_CFG_SPACE_SIZE;
 }
 
-static void pci_release_bus_bridge_dev(struct device *dev)
-{
-	struct pci_host_bridge *bridge = to_pci_host_bridge(dev);
-
-	if (bridge->release_fn)
-		bridge->release_fn(bridge);
-
-	pci_free_resource_list(&bridge->windows);
-
-	kfree(bridge);
-}
-
 struct pci_dev *pci_alloc_dev(struct pci_bus *bus)
 {
 	struct pci_dev *dev;
@@ -1688,13 +1687,10 @@ struct pci_bus *pci_create_root_bus(struct device *parent, int bus,
 	char bus_addr[64];
 	char *fmt;
 
-	b = pci_alloc_bus();
+	b = pci_alloc_bus(ops, sysdata, bus);
 	if (!b)
 		return NULL;
 
-	b->sysdata = sysdata;
-	b->ops = ops;
-	b->number = b->busn_res.start = bus;
 	b2 = pci_find_bus(pci_domain_nr(b), bus);
 	if (b2) {
 		/* If we already got to this bus through a different bridge, ignore it */
@@ -1706,27 +1702,22 @@ struct pci_bus *pci_create_root_bus(struct device *parent, int bus,
 	if (!bridge)
 		goto err_out;
 
-	bridge->dev.parent = parent;
-	bridge->dev.release = pci_release_bus_bridge_dev;
-	dev_set_name(&bridge->dev, "pci%04x:%02x", pci_domain_nr(b), bus);
 	error = pcibios_root_bridge_prepare(bridge);
 	if (error)
 		goto bridge_dev_reg_err;
 
-	error = device_register(&bridge->dev);
+	bridge->dev.parent = parent;
+	error = device_add(&bridge->dev);
 	if (error)
 		goto bridge_dev_reg_err;
+
 	b->bridge = get_device(&bridge->dev);
 	device_enable_async_suspend(b->bridge);
 	pci_set_bus_of_node(b);
-
 	if (!parent)
 		set_dev_node(b->bridge, pcibus_to_node(b));
-
-	b->dev.class = &pcibus_class;
 	b->dev.parent = b->bridge;
-	dev_set_name(&b->dev, "%04x:%02x", pci_domain_nr(b), bus);
-	error = device_register(&b->dev);
+	error = device_add(&b->dev);
 	if (error)
 		goto class_dev_reg_err;
 
@@ -1769,12 +1760,11 @@ struct pci_bus *pci_create_root_bus(struct device *parent, int bus,
 	return b;
 
 class_dev_reg_err:
-	put_device(&bridge->dev);
-	device_unregister(&bridge->dev);
+	device_del(&bridge->dev);
 bridge_dev_reg_err:
-	kfree(bridge);
+	put_device(&bridge->dev);
 err_out:
-	kfree(b);
+	put_device(&b->dev);
 	return NULL;
 }
 
diff --git a/drivers/pci/remove.c b/drivers/pci/remove.c
index 8fc54b7..b0ce875 100644
--- a/drivers/pci/remove.c
+++ b/drivers/pci/remove.c
@@ -52,7 +52,8 @@ void pci_remove_bus(struct pci_bus *bus)
 	up_write(&pci_bus_sem);
 	pci_remove_legacy_files(bus);
 	pcibios_remove_bus(bus);
-	device_unregister(&bus->dev);
+	device_del(&bus->dev);
+	put_device(&bus->dev);
 }
 EXPORT_SYMBOL(pci_remove_bus);
 
-- 
1.8.1.2

Re: [PATCH v2, part 1 8/9] PCI: make PCI host bridge/bus creating and destroying logic symmetric

[Gu Zheng]

On 05/14/2013 12:08 AM, Jiang Liu wrote:

> This patch makes PCI host bridge/bus creating and destroying logic
> symmetric by using device_initialize()/device_add()/device_del()/put_device()
> pairs as discussed in thread at:
> http://comments.gmane.org/gmane.linux.kernel.pci/22073
> 
> It also fixes a bug in error recovery path in pci_create_root_bus()
> which may kfree() an in-use host bridge object.
> 
> Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
> Cc: Yinghai Lu <yinghai@kernel.org>
> ---
>  drivers/pci/probe.c  | 84 +++++++++++++++++++++++-----------------------------
>  drivers/pci/remove.c |  3 +-
>  2 files changed, 39 insertions(+), 48 deletions(-)
> 
> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> index bc075a3..a2617c2 100644
> --- a/drivers/pci/probe.c
> +++ b/drivers/pci/probe.c
> @@ -451,7 +451,7 @@ void pci_read_bridge_bases(struct pci_bus *child)
>  	}
>  }
>  
> -static struct pci_bus * pci_alloc_bus(void)
> +static struct pci_bus *pci_alloc_bus(struct pci_ops *ops, void *sd, int bus)
>  {
>  	struct pci_bus *b;
>  
> @@ -464,10 +464,32 @@ static struct pci_bus * pci_alloc_bus(void)
>  		INIT_LIST_HEAD(&b->resources);
>  		b->max_bus_speed = PCI_SPEED_UNKNOWN;
>  		b->cur_bus_speed = PCI_SPEED_UNKNOWN;
> +		b->sysdata = sd;
> +		b->ops = ops;
> +		b->number = bus;
> +		b->busn_res.start = bus;
> +		b->busn_res.end = 0xff;
> +		b->busn_res.flags = IORESOURCE_BUS;
> +		b->dev.class = &pcibus_class;
> +		dev_set_name(&b->dev, "%04x:%02x", pci_domain_nr(b), bus);
> +		device_initialize(&b->dev);
>  	}
> +
>  	return b;
>  }
>  
> +static void pci_release_host_bridge_dev(struct device *dev)
> +{
> +	struct pci_host_bridge *bridge = to_pci_host_bridge(dev);
> +
> +	if (bridge->release_fn)
> +		bridge->release_fn(bridge);
> +
> +	pci_free_resource_list(&bridge->windows);
> +
> +	kfree(bridge);
> +}
> +
>  static struct pci_host_bridge *pci_alloc_host_bridge(struct pci_bus *b)
>  {
>  	struct pci_host_bridge *bridge;
> @@ -476,6 +498,10 @@ static struct pci_host_bridge *pci_alloc_host_bridge(struct pci_bus *b)
>  	if (bridge) {
>  		INIT_LIST_HEAD(&bridge->windows);
>  		bridge->bus = b;
> +		bridge->dev.release = pci_release_host_bridge_dev;
> +		dev_set_name(&bridge->dev, "pci%04x:%02x",
> +			     pci_domain_nr(b), b->number);
> +		device_initialize(&bridge->dev);
>  	}
>  
>  	return bridge;
> @@ -628,28 +654,13 @@ static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent,
>  	/*
>  	 * Allocate a new bus, and inherit stuff from the parent..
>  	 */
> -	child = pci_alloc_bus();
> +	child = pci_alloc_bus(parent->ops, parent->sysdata, busnr);
>  	if (!child)
>  		return NULL;
>  
>  	child->parent = parent;
> -	child->ops = parent->ops;
> -	child->sysdata = parent->sysdata;
>  	child->bus_flags = parent->bus_flags;
> -
> -	/* initialize some portions of the bus device, but don't register it
> -	 * now as the parent is not properly set up yet.
> -	 */
> -	child->dev.class = &pcibus_class;
> -	dev_set_name(&child->dev, "%04x:%02x", pci_domain_nr(child), busnr);
> -
> -	/*
> -	 * Set up the primary, secondary and subordinate
> -	 * bus numbers.
> -	 */
> -	child->number = child->busn_res.start = busnr;
>  	child->primary = parent->busn_res.start;
> -	child->busn_res.end = 0xff;
>  
>  	if (!bridge) {
>  		child->dev.parent = parent->bridge;
> @@ -670,7 +681,7 @@ static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent,
>  	bridge->subordinate = child;
>  
>  add_dev:
> -	ret = device_register(&child->dev);
> +	ret = device_add(&child->dev);
>  	WARN_ON(ret < 0);
>  
>  	pcibios_add_bus(child);
> @@ -1190,18 +1201,6 @@ int pci_cfg_space_size(struct pci_dev *dev)
>  	return PCI_CFG_SPACE_SIZE;
>  }
>  
> -static void pci_release_bus_bridge_dev(struct device *dev)
> -{
> -	struct pci_host_bridge *bridge = to_pci_host_bridge(dev);
> -
> -	if (bridge->release_fn)
> -		bridge->release_fn(bridge);
> -
> -	pci_free_resource_list(&bridge->windows);
> -
> -	kfree(bridge);
> -}
> -
>  struct pci_dev *pci_alloc_dev(struct pci_bus *bus)
>  {
>  	struct pci_dev *dev;
> @@ -1688,13 +1687,10 @@ struct pci_bus *pci_create_root_bus(struct device *parent, int bus,
>  	char bus_addr[64];
>  	char *fmt;
>  
> -	b = pci_alloc_bus();
> +	b = pci_alloc_bus(ops, sysdata, bus);
>  	if (!b)
>  		return NULL;
>  
> -	b->sysdata = sysdata;
> -	b->ops = ops;
> -	b->number = b->busn_res.start = bus;
>  	b2 = pci_find_bus(pci_domain_nr(b), bus);
>  	if (b2) {
>  		/* If we already got to this bus through a different bridge, ignore it */
> @@ -1706,27 +1702,22 @@ struct pci_bus *pci_create_root_bus(struct device *parent, int bus,
>  	if (!bridge)
>  		goto err_out;
>  
> -	bridge->dev.parent = parent;
> -	bridge->dev.release = pci_release_bus_bridge_dev;
> -	dev_set_name(&bridge->dev, "pci%04x:%02x", pci_domain_nr(b), bus);
>  	error = pcibios_root_bridge_prepare(bridge);
>  	if (error)
>  		goto bridge_dev_reg_err;
>  
> -	error = device_register(&bridge->dev);
> +	bridge->dev.parent = parent;
> +	error = device_add(&bridge->dev);
>  	if (error)
>  		goto bridge_dev_reg_err;
> +
>  	b->bridge = get_device(&bridge->dev);
>  	device_enable_async_suspend(b->bridge);
>  	pci_set_bus_of_node(b);
> -
>  	if (!parent)
>  		set_dev_node(b->bridge, pcibus_to_node(b));
> -
> -	b->dev.class = &pcibus_class;
>  	b->dev.parent = b->bridge;
> -	dev_set_name(&b->dev, "%04x:%02x", pci_domain_nr(b), bus);
> -	error = device_register(&b->dev);
> +	error = device_add(&b->dev);
>  	if (error)
>  		goto class_dev_reg_err;
>  
> @@ -1769,12 +1760,11 @@ struct pci_bus *pci_create_root_bus(struct device *parent, int bus,
>  	return b;
>  
>  class_dev_reg_err:
> -	put_device(&bridge->dev);
> -	device_unregister(&bridge->dev);
> +	device_del(&bridge->dev);
>  bridge_dev_reg_err:
> -	kfree(bridge);
> +	put_device(&bridge->dev);
>  err_out:
> -	kfree(b);
> +	put_device(&b->dev);
>  	return NULL;
>  }

Hi Jiang,
	I think the changes here may lead to memleak, doesn't it?

Best regards,
Gu

>  
> diff --git a/drivers/pci/remove.c b/drivers/pci/remove.c
> index 8fc54b7..b0ce875 100644
> --- a/drivers/pci/remove.c
> +++ b/drivers/pci/remove.c
> @@ -52,7 +52,8 @@ void pci_remove_bus(struct pci_bus *bus)
>  	up_write(&pci_bus_sem);
>  	pci_remove_legacy_files(bus);
>  	pcibios_remove_bus(bus);
> -	device_unregister(&bus->dev);
> +	device_del(&bus->dev);
> +	put_device(&bus->dev);
>  }
>  EXPORT_SYMBOL(pci_remove_bus);
>  

Re: [PATCH v2, part 1 8/9] PCI: make PCI host bridge/bus creating and destroying logic symmetric

[Liu Jiang]

On Mon 20 May 2013 02:35:31 PM CST, Gu Zheng wrote:
>
> On 05/14/2013 12:08 AM, Jiang Liu wrote:
>
>> This patch makes PCI host bridge/bus creating and destroying logic
>> symmetric by using device_initialize()/device_add()/device_del()/put_device()
>> pairs as discussed in thread at:
>> http://comments.gmane.org/gmane.linux.kernel.pci/22073
>>
>> It also fixes a bug in error recovery path in pci_create_root_bus()
>> which may kfree() an in-use host bridge object.
>>
>> Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
>> Cc: Yinghai Lu <yinghai@kernel.org>
>> ---
>>   drivers/pci/probe.c  | 84 +++++++++++++++++++++++-----------------------------
>>   drivers/pci/remove.c |  3 +-
>>   2 files changed, 39 insertions(+), 48 deletions(-)
>>
>> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
>> index bc075a3..a2617c2 100644
>> --- a/drivers/pci/probe.c
>> +++ b/drivers/pci/probe.c
>> @@ -451,7 +451,7 @@ void pci_read_bridge_bases(struct pci_bus *child)
>>   	}
>>   }
>>
>> -static struct pci_bus * pci_alloc_bus(void)
>> +static struct pci_bus *pci_alloc_bus(struct pci_ops *ops, void *sd, int bus)
>>   {
>>   	struct pci_bus *b;
>>
>> @@ -464,10 +464,32 @@ static struct pci_bus * pci_alloc_bus(void)
>>   		INIT_LIST_HEAD(&b->resources);
>>   		b->max_bus_speed = PCI_SPEED_UNKNOWN;
>>   		b->cur_bus_speed = PCI_SPEED_UNKNOWN;
>> +		b->sysdata = sd;
>> +		b->ops = ops;
>> +		b->number = bus;
>> +		b->busn_res.start = bus;
>> +		b->busn_res.end = 0xff;
>> +		b->busn_res.flags = IORESOURCE_BUS;
>> +		b->dev.class = &pcibus_class;
>> +		dev_set_name(&b->dev, "%04x:%02x", pci_domain_nr(b), bus);
>> +		device_initialize(&b->dev);
>>   	}
>> +
>>   	return b;
>>   }
>>
>> +static void pci_release_host_bridge_dev(struct device *dev)
>> +{
>> +	struct pci_host_bridge *bridge = to_pci_host_bridge(dev);
>> +
>> +	if (bridge->release_fn)
>> +		bridge->release_fn(bridge);
>> +
>> +	pci_free_resource_list(&bridge->windows);
>> +
>> +	kfree(bridge);
>> +}
>> +
>>   static struct pci_host_bridge *pci_alloc_host_bridge(struct pci_bus *b)
>>   {
>>   	struct pci_host_bridge *bridge;
>> @@ -476,6 +498,10 @@ static struct pci_host_bridge *pci_alloc_host_bridge(struct pci_bus *b)
>>   	if (bridge) {
>>   		INIT_LIST_HEAD(&bridge->windows);
>>   		bridge->bus = b;
>> +		bridge->dev.release = pci_release_host_bridge_dev;
>> +		dev_set_name(&bridge->dev, "pci%04x:%02x",
>> +			     pci_domain_nr(b), b->number);
>> +		device_initialize(&bridge->dev);
>>   	}
>>
>>   	return bridge;
>> @@ -628,28 +654,13 @@ static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent,
>>   	/*
>>   	 * Allocate a new bus, and inherit stuff from the parent..
>>   	 */
>> -	child = pci_alloc_bus();
>> +	child = pci_alloc_bus(parent->ops, parent->sysdata, busnr);
>>   	if (!child)
>>   		return NULL;
>>
>>   	child->parent = parent;
>> -	child->ops = parent->ops;
>> -	child->sysdata = parent->sysdata;
>>   	child->bus_flags = parent->bus_flags;
>> -
>> -	/* initialize some portions of the bus device, but don't register it
>> -	 * now as the parent is not properly set up yet.
>> -	 */
>> -	child->dev.class = &pcibus_class;
>> -	dev_set_name(&child->dev, "%04x:%02x", pci_domain_nr(child), busnr);
>> -
>> -	/*
>> -	 * Set up the primary, secondary and subordinate
>> -	 * bus numbers.
>> -	 */
>> -	child->number = child->busn_res.start = busnr;
>>   	child->primary = parent->busn_res.start;
>> -	child->busn_res.end = 0xff;
>>
>>   	if (!bridge) {
>>   		child->dev.parent = parent->bridge;
>> @@ -670,7 +681,7 @@ static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent,
>>   	bridge->subordinate = child;
>>
>>   add_dev:
>> -	ret = device_register(&child->dev);
>> +	ret = device_add(&child->dev);
>>   	WARN_ON(ret < 0);
>>
>>   	pcibios_add_bus(child);
>> @@ -1190,18 +1201,6 @@ int pci_cfg_space_size(struct pci_dev *dev)
>>   	return PCI_CFG_SPACE_SIZE;
>>   }
>>
>> -static void pci_release_bus_bridge_dev(struct device *dev)
>> -{
>> -	struct pci_host_bridge *bridge = to_pci_host_bridge(dev);
>> -
>> -	if (bridge->release_fn)
>> -		bridge->release_fn(bridge);
>> -
>> -	pci_free_resource_list(&bridge->windows);
>> -
>> -	kfree(bridge);
>> -}
>> -
>>   struct pci_dev *pci_alloc_dev(struct pci_bus *bus)
>>   {
>>   	struct pci_dev *dev;
>> @@ -1688,13 +1687,10 @@ struct pci_bus *pci_create_root_bus(struct device *parent, int bus,
>>   	char bus_addr[64];
>>   	char *fmt;
>>
>> -	b = pci_alloc_bus();
>> +	b = pci_alloc_bus(ops, sysdata, bus);
>>   	if (!b)
>>   		return NULL;
>>
>> -	b->sysdata = sysdata;
>> -	b->ops = ops;
>> -	b->number = b->busn_res.start = bus;
>>   	b2 = pci_find_bus(pci_domain_nr(b), bus);
>>   	if (b2) {
>>   		/* If we already got to this bus through a different bridge, ignore it */
>> @@ -1706,27 +1702,22 @@ struct pci_bus *pci_create_root_bus(struct device *parent, int bus,
>>   	if (!bridge)
>>   		goto err_out;
>>
>> -	bridge->dev.parent = parent;
>> -	bridge->dev.release = pci_release_bus_bridge_dev;
>> -	dev_set_name(&bridge->dev, "pci%04x:%02x", pci_domain_nr(b), bus);
>>   	error = pcibios_root_bridge_prepare(bridge);
>>   	if (error)
>>   		goto bridge_dev_reg_err;
>>
>> -	error = device_register(&bridge->dev);
>> +	bridge->dev.parent = parent;
>> +	error = device_add(&bridge->dev);
>>   	if (error)
>>   		goto bridge_dev_reg_err;
>> +
>>   	b->bridge = get_device(&bridge->dev);
>>   	device_enable_async_suspend(b->bridge);
>>   	pci_set_bus_of_node(b);
>> -
>>   	if (!parent)
>>   		set_dev_node(b->bridge, pcibus_to_node(b));
>> -
>> -	b->dev.class = &pcibus_class;
>>   	b->dev.parent = b->bridge;
>> -	dev_set_name(&b->dev, "%04x:%02x", pci_domain_nr(b), bus);
>> -	error = device_register(&b->dev);
>> +	error = device_add(&b->dev);
>>   	if (error)
>>   		goto class_dev_reg_err;
>>
>> @@ -1769,12 +1760,11 @@ struct pci_bus *pci_create_root_bus(struct device *parent, int bus,
>>   	return b;
>>
>>   class_dev_reg_err:
>> -	put_device(&bridge->dev);
>> -	device_unregister(&bridge->dev);
>> +	device_del(&bridge->dev);
>>   bridge_dev_reg_err:
>> -	kfree(bridge);
>> +	put_device(&bridge->dev);
>>   err_out:
>> -	kfree(b);
>> +	put_device(&b->dev);
>>   	return NULL;
>>   }
>
> Hi Jiang,
> 	I think the changes here may lead to memleak, doesn't it?
>
> Best regards,
> Gu
Hi Gu Zheng,
     I have checked to code again and didn't find the memory leakage 
issue.
Could you please help to give more hints about the leakage?
Thanks!
Gerry

>
>>
>> diff --git a/drivers/pci/remove.c b/drivers/pci/remove.c
>> index 8fc54b7..b0ce875 100644
>> --- a/drivers/pci/remove.c
>> +++ b/drivers/pci/remove.c
>> @@ -52,7 +52,8 @@ void pci_remove_bus(struct pci_bus *bus)
>>   	up_write(&pci_bus_sem);
>>   	pci_remove_legacy_files(bus);
>>   	pcibios_remove_bus(bus);
>> -	device_unregister(&bus->dev);
>> +	device_del(&bus->dev);
>> +	put_device(&bus->dev);
>>   }
>>   EXPORT_SYMBOL(pci_remove_bus);
>>
>
>

[PATCH v2, part 1 9/9] PCI, unicore, m68k: remove redundant call of pci_bus_add_devices()

[Jiang Liu]

pci_scan_bus() and pci_scan_root_bus() has called pci_bus_add_devices()
once, so remove the redundant call of pci_bus_add_devices().
On the other handle, subsys_init() callbacks will be invoked before
device_init() callbacks, so it should be safe to remove the redundant
calls.

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
---
 arch/m68k/platform/coldfire/pci.c | 2 +-
 arch/unicore32/kernel/pci.c       | 5 -----
 2 files changed, 1 insertion(+), 6 deletions(-)

diff --git a/arch/m68k/platform/coldfire/pci.c b/arch/m68k/platform/coldfire/pci.c
index 8572246..2345972 100644
--- a/arch/m68k/platform/coldfire/pci.c
+++ b/arch/m68k/platform/coldfire/pci.c
@@ -320,7 +320,7 @@ static int __init mcf_pci_init(void)
 	pci_bus_size_bridges(rootbus);
 	pci_bus_assign_resources(rootbus);
 	pci_enable_bridges(rootbus);
-	pci_bus_add_devices(rootbus);
+
 	return 0;
 }
 
diff --git a/arch/unicore32/kernel/pci.c b/arch/unicore32/kernel/pci.c
index ef69c0c..374a055 100644
--- a/arch/unicore32/kernel/pci.c
+++ b/arch/unicore32/kernel/pci.c
@@ -277,11 +277,6 @@ static int __init pci_common_init(void)
 		pci_bus_assign_resources(puv3_bus);
 	}
 
-	/*
-	 * Tell drivers about devices found.
-	 */
-	pci_bus_add_devices(puv3_bus);
-
 	return 0;
 }
 subsys_initcall(pci_common_init);
-- 
1.8.1.2