From: Yinghai Lu <yinghai@kernel.org>
To: Bjorn Helgaas <bhelgaas@google.com>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Gavin Shan <shangw@linux.vnet.ibm.com>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH v5 5/7] PCI: Split pci_assign_unassigned_resources to per root bus
Date: Fri, 31 May 2013 23:03:10 -0700 [thread overview]
Message-ID: <1370066593-22736-5-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1370066593-22736-1-git-send-email-yinghai@kernel.org>
We need to split pci_assign_unassiged_resource to every root bus, so can
have different retry for assign_unassigned per root bus
Also we need root bus hot add and booting path use same code.
-v2: separate enable_local and pci_release_bridge_resources to
other patches requested by Bjorn.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
drivers/pci/setup-bus.c | 62 +++++++++++++++++++-----------------------------
1 file changed, 25 insertions(+), 37 deletions(-)
Index: linux-2.6/drivers/pci/setup-bus.c
===================================================================
--- linux-2.6.orig/drivers/pci/setup-bus.c
+++ linux-2.6/drivers/pci/setup-bus.c
@@ -1383,21 +1383,6 @@ static int __init pci_bus_get_depth(stru
return depth;
}
-static int __init pci_get_max_depth(void)
-{
- int depth = 0;
- struct pci_bus *bus;
-
- list_for_each_entry(bus, &pci_root_buses, node) {
- int ret;
-
- ret = pci_bus_get_depth(bus);
- if (ret > depth)
- depth = ret;
- }
-
- return depth;
-}
/*
* -1: undefined, will auto detect later
@@ -1473,10 +1458,9 @@ static enum enable_type __init pci_reall
* second and later try will clear small leaf bridge res
* will stop till to the max deepth if can not find good one
*/
-void __init
-pci_assign_unassigned_resources(void)
+static void __init
+pci_assign_unassigned_root_bus_resources(struct pci_bus *bus)
{
- struct pci_bus *bus;
LIST_HEAD(realloc_head); /* list of resources that
want additional resources */
struct list_head *add_list = NULL;
@@ -1487,17 +1471,17 @@ pci_assign_unassigned_resources(void)
unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM |
IORESOURCE_PREFETCH;
int pci_try_num = 1;
- enum enable_type enable_local = pci_realloc_enable;
-
- list_for_each_entry(bus, &pci_root_buses, node)
- enable_local = pci_realloc_detect(bus, enable_local);
+ enum enable_type enable_local;
+ /* don't realloc if asked to do so */
+ enable_local = pci_realloc_detect(bus, pci_realloc_enable);
if (pci_realloc_enabled(enable_local)) {
- int max_depth = pci_get_max_depth();
+ int max_depth = pci_bus_get_depth(bus);
pci_try_num = max_depth + 1;
- printk(KERN_DEBUG "PCI: max bus depth: %d pci_try_num: %d\n",
- max_depth, pci_try_num);
+ dev_printk(KERN_DEBUG, &bus->dev,
+ "max bus depth: %d pci_try_num: %d\n",
+ max_depth, pci_try_num);
}
again:
@@ -1509,12 +1493,10 @@ again:
add_list = &realloc_head;
/* Depth first, calculate sizes and alignments of all
subordinate buses. */
- list_for_each_entry(bus, &pci_root_buses, node)
- __pci_bus_size_bridges(bus, add_list);
+ __pci_bus_size_bridges(bus, add_list);
/* Depth last, allocate resources and update the hardware. */
- list_for_each_entry(bus, &pci_root_buses, node)
- __pci_bus_assign_resources(bus, add_list, &fail_head);
+ __pci_bus_assign_resources(bus, add_list, &fail_head);
if (add_list)
BUG_ON(!list_empty(add_list));
tried_times++;
@@ -1525,16 +1507,16 @@ again:
if (tried_times >= pci_try_num) {
if (enable_local == undefined)
- printk(KERN_INFO "Some PCI device resources are unassigned, try booting with pci=realloc\n");
+ dev_info(&bus->dev, "Some PCI device resources are unassigned, try booting with pci=realloc\n");
else if (enable_local == auto_enabled)
- printk(KERN_INFO "Automatically enabled pci realloc, if you have problem, try booting with pci=realloc=off\n");
+ dev_info(&bus->dev, "Automatically enabled pci realloc, if you have problem, try booting with pci=realloc=off\n");
free_list(&fail_head);
goto enable_and_dump;
}
- printk(KERN_DEBUG "PCI: No. %d try to assign unassigned res\n",
- tried_times + 1);
+ dev_printk(KERN_DEBUG, &bus->dev,
+ "No. %d try to assign unassigned res\n", tried_times + 1);
/* third times and later will not check if it is leaf */
if ((tried_times + 1) > 2)
@@ -1565,12 +1547,18 @@ again:
enable_and_dump:
/* Depth last, update the hardware. */
- list_for_each_entry(bus, &pci_root_buses, node)
- pci_enable_bridges(bus);
+ pci_enable_bridges(bus);
/* dump the resource on buses */
- list_for_each_entry(bus, &pci_root_buses, node)
- pci_bus_dump_resources(bus);
+ pci_bus_dump_resources(bus);
+}
+
+void __init pci_assign_unassigned_resources(void)
+{
+ struct pci_bus *root_bus;
+
+ list_for_each_entry(root_bus, &pci_root_buses, node)
+ pci_assign_unassigned_root_bus_resources(root_bus);
}
void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge)
next prev parent reply other threads:[~2013-06-01 6:04 UTC|newest]
Thread overview: 76+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-05 0:10 Resource assignment oddities Benjamin Herrenschmidt
2013-05-05 0:15 ` Benjamin Herrenschmidt
2013-05-05 5:18 ` Yinghai Lu
2013-05-05 5:34 ` Benjamin Herrenschmidt
2013-05-05 7:09 ` Yinghai Lu
2013-05-05 7:52 ` Benjamin Herrenschmidt
[not found] ` <51871088.4594420a.0ccc.7300SMTPIN_ADDED_BROKEN@mx.google.com>
2013-05-06 3:04 ` Yinghai Lu
[not found] ` <20130506103159.GA16927@shangw.(null)>
2013-05-06 10:48 ` Benjamin Herrenschmidt
2013-05-06 19:56 ` Yinghai Lu
[not found] ` <5188b791.a110420a.0bea.077eSMTPIN_ADDED_BROKEN@mx.google.com>
2013-05-07 22:21 ` Yinghai Lu
[not found] ` <5189c22b.45f7440a.0a88.6b75SMTPIN_ADDED_BROKEN@mx.google.com>
2013-05-08 3:42 ` Yinghai Lu
2013-05-17 5:36 ` Benjamin Herrenschmidt
2013-05-21 17:28 ` Bjorn Helgaas
2013-05-21 17:39 ` Yinghai Lu
2013-05-21 22:01 ` Benjamin Herrenschmidt
2013-05-06 23:15 ` [PATCH 1/2] PCI: Split pci_assign_unassigned_resources to per root bus Yinghai Lu
2013-05-06 23:15 ` [PATCH 2/2] PCI: Skip IORESOURCE_IO size and allocation for root bus without ioport range Yinghai Lu
2013-05-07 0:50 ` [PATCH 1/2] PCI: Split pci_assign_unassigned_resources to per root bus Benjamin Herrenschmidt
[not found] ` <51885a04.c181440a.37c9.ffffa88eSMTPIN_ADDED_BROKEN@mx.google.com>
2013-05-07 7:34 ` Yinghai Lu
2013-05-21 20:41 ` Bjorn Helgaas
2013-05-07 22:17 ` [PATCH v3 0/5] PCI: Skip resource allocation for root bus without conresponding type resource Yinghai Lu
2013-05-07 22:17 ` [PATCH v3 1/5] PCI: Split pci_assign_unassigned_resources to per root bus Yinghai Lu
2013-05-07 22:17 ` [PATCH v3 2/5] PCI: Skip IORESOURCE_IO allocation for root bus without ioport range Yinghai Lu
2013-05-07 22:17 ` [PATCH v3 3/5] PCI: Skip IORESOURCE_MMIO allocation for root bus without MMIO range Yinghai Lu
2013-05-07 22:28 ` Benjamin Herrenschmidt
2013-05-07 22:44 ` Yinghai Lu
2013-05-08 1:16 ` Benjamin Herrenschmidt
2013-05-08 3:57 ` Yinghai Lu
2013-05-07 22:17 ` [PATCH v3 4/5] PCI: Enable pci bridge when it is needed Yinghai Lu
2013-05-07 22:17 ` [PATCH v3 5/5] PCI: Retry assign unassigned resources for hotadd root bus Yinghai Lu
2013-05-22 6:38 ` [PATCH v4 0/8] PCI: Skip resource allocation for root bus without conresponding type resource Yinghai Lu
2013-05-22 6:38 ` [PATCH v4 1/8] PCI: Don't use temp bus for pci_bus_release_bridge_resources Yinghai Lu
2013-05-22 6:38 ` [PATCH v4 2/8] PCI: Use pci_walk_bus to detect unassigned resources Yinghai Lu
2013-05-22 6:38 ` [PATCH v4 3/8] PCI: Introduce enable_local to prepare per root bus handling Yinghai Lu
2013-05-22 6:38 ` [PATCH v4 4/8] PCI: Split pci_assign_unassigned_resources to per root bus Yinghai Lu
2013-05-22 6:38 ` [PATCH v4 5/8] PCI: Skip IORESOURCE_IO allocation for root bus without ioport range Yinghai Lu
2013-05-22 6:38 ` [PATCH v4 6/8] PCI: Skip IORESOURCE_MMIO allocation for root bus without MMIO range Yinghai Lu
2013-05-22 6:38 ` [PATCH v4 7/8] PCI: Enable pci bridge when it is needed Yinghai Lu
2013-05-22 6:38 ` [PATCH v4 8/8] PCI: Retry assign unassigned resources for hotadd root bus Yinghai Lu
2013-06-01 6:03 ` [PATCH v5 0/7] PCI: Change assign unassigned resources per root bus bassis Yinghai Lu
2013-06-01 6:03 ` [PATCH v5 2/7] PCI: Don't use temp bus for pci_bus_release_bridge_resources Yinghai Lu
2013-06-01 6:03 ` [PATCH v5 3/7] PCI: Use pci_walk_bus to detect unassigned resources Yinghai Lu
2013-06-25 21:15 ` Bjorn Helgaas
2013-06-25 21:38 ` Benjamin Herrenschmidt
2013-06-25 21:46 ` Bjorn Helgaas
2013-06-26 8:07 ` Yinghai Lu
2013-06-26 7:38 ` Yinghai Lu
2013-06-01 6:03 ` [PATCH v5 4/7] PCI: Introduce enable_local to prepare per root bus handling Yinghai Lu
2013-06-01 6:03 ` Yinghai Lu [this message]
2013-06-01 6:03 ` [PATCH v5 6/7] PCI: Enable pci bridge when it is needed Yinghai Lu
2013-06-01 6:03 ` [PATCH v5 7/7] PCI: Retry assign unassigned resources for hotadd root bus Yinghai Lu
2013-06-01 6:03 ` [PATCH v5 1/7] PCI: Don't let mmio fallback to must-only, if ioport fails with must+optional Yinghai Lu
2013-06-22 3:00 ` [PATCH v5 0/7] PCI: Change assign unassigned resources per root bus bassis Yinghai Lu
[not found] ` <518786a7.64bbec0a.58a0.1f6bSMTPIN_ADDED_BROKEN@mx.google.com>
2013-05-22 14:54 ` Resource assignment oddities Bjorn Helgaas
2013-05-22 16:59 ` Yinghai Lu
2013-05-22 17:21 ` Bjorn Helgaas
2013-05-22 20:44 ` Benjamin Herrenschmidt
2013-05-22 21:01 ` Yinghai Lu
2013-05-22 20:43 ` Benjamin Herrenschmidt
2013-05-22 21:00 ` Yinghai Lu
2013-05-22 21:13 ` Benjamin Herrenschmidt
2013-05-22 20:50 ` Yinghai Lu
[not found] ` <519dcfbe.89e9420a.4934.488bSMTPIN_ADDED_BROKEN@mx.google.com>
2013-05-23 17:08 ` Yinghai Lu
2013-05-23 17:12 ` Bjorn Helgaas
2013-05-23 17:17 ` Yinghai Lu
2013-05-23 19:47 ` Bjorn Helgaas
2013-05-23 21:00 ` Yinghai Lu
2013-05-23 21:23 ` Benjamin Herrenschmidt
2013-05-23 22:16 ` Yinghai Lu
2013-05-24 15:59 ` Bjorn Helgaas
2013-05-24 16:33 ` Benjamin Herrenschmidt
2013-05-24 16:34 ` Yinghai Lu
2013-05-23 17:11 ` [PATCH] PCI: Don't let mmio fallback to must-only, if ioport fails with must+optional Yinghai Lu
2013-05-24 17:25 ` Bjorn Helgaas
2013-05-24 23:31 ` [PATCH v3] " Yinghai Lu
2013-05-24 23:34 ` [PATCH] " Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1370066593-22736-5-git-send-email-yinghai@kernel.org \
--to=yinghai@kernel.org \
--cc=benh@kernel.crashing.org \
--cc=bhelgaas@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=shangw@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).