linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Yinghai Lu <yinghai@kernel.org>
To: Thomas Gleixner <tglx@linutronix.de>, Ingo Molnar <mingo@elte.hu>,
	"H. Peter Anvin" <hpa@zytor.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	"Rafael J. Wysocki" <rjw@sisk.pl>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	Yinghai Lu <yinghai@kernel.org>,
	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>,
	Sebastian Andrzej Siewior <sebastian@breakpoint.cc>,
	Joerg Roedel <joro@8bytes.org>
Subject: [PATCH v3 02/27] x86, irq: Modify irq chip once for irq remapping
Date: Fri,  7 Jun 2013 15:30:48 -0700	[thread overview]
Message-ID: <1370644273-10495-3-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1370644273-10495-1-git-send-email-yinghai@kernel.org>

Current code: after irq remapping is enabled, irq_chip fields are modified
during every irq setup.
	mp_register_gsi
		io_apic_set_pci_routing
			io_apic_setup_irq_pin
				setup_ioapic_irq
					ioapic_register_intr
						setup_remapped_irq
	native_setup_msi_irqs
		setup_msi_irq
			setup_remapped_irq
	default_setup_hpet_msi
		setup_remapped_irq
that is not efficient.

We only need to modify those irq chip one time just after we enable
irq mapping.

Change irq_remap_modify_chip_defaults() to __init as it only gets
called during booting stage, via irq_remap_modify_chips().

Affected irq_chip: ioapic_chip, msi_chip, hpet_msi_type.
We don't need to use #ifdef in irq_remap_modify_chips():
IRQ_REMAP only support x86_64 and X86_IO_APIC and PCI_MSI.
HPET_TIMER is set when x86_64 is set.
When we have IRQ_REMAP enabled, al three chips are defined and
used.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Cc: Joerg Roedel <joro@8bytes.org>
---
 arch/x86/include/asm/io_apic.h |  5 +++++
 arch/x86/kernel/apic/apic.c    |  9 ++++++++-
 arch/x86/kernel/apic/io_apic.c |  8 +++-----
 drivers/iommu/irq_remapping.c  | 11 +++++++++--
 4 files changed, 25 insertions(+), 8 deletions(-)

diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index 459e50a..eaff3ad 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -215,6 +215,11 @@ static inline void io_apic_modify(unsigned int apic, unsigned int reg, unsigned
 
 extern void io_apic_eoi(unsigned int apic, unsigned int vector);
 
+extern struct irq_chip ioapic_chip;
+extern struct irq_chip msi_chip;
+extern struct irq_chip hpet_msi_type;
+void irq_remap_modify_chips(void);
+
 #else  /* !CONFIG_X86_IO_APIC */
 
 #define io_apic_assign_pci_irqs 0
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 904611b..ff50b90 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -1552,6 +1552,8 @@ void enable_x2apic(void)
 int __init enable_IR(void)
 {
 #ifdef CONFIG_IRQ_REMAP
+	int ret;
+
 	if (!irq_remapping_supported()) {
 		pr_debug("intr-remapping not supported\n");
 		return -1;
@@ -1563,7 +1565,12 @@ int __init enable_IR(void)
 		return -1;
 	}
 
-	return irq_remapping_enable();
+	ret = irq_remapping_enable();
+
+	if (ret >= 0)
+		irq_remap_modify_chips();
+
+	return ret;
 #endif
 	return -1;
 }
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 9ed796c..f78f7f6 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -1238,8 +1238,6 @@ void __setup_vector_irq(int cpu)
 	raw_spin_unlock(&vector_lock);
 }
 
-static struct irq_chip ioapic_chip;
-
 #ifdef CONFIG_X86_32
 static inline int IO_APIC_irq_trigger(int irq)
 {
@@ -2511,7 +2509,7 @@ static void ack_apic_level(struct irq_data *data)
 	ioapic_irqd_unmask(data, cfg, masked);
 }
 
-static struct irq_chip ioapic_chip __read_mostly = {
+struct irq_chip ioapic_chip __read_mostly = {
 	.name			= "IO-APIC",
 	.irq_startup		= startup_ioapic_irq,
 	.irq_mask		= mask_ioapic_irq,
@@ -3093,7 +3091,7 @@ msi_set_affinity(struct irq_data *data, const struct cpumask *mask, bool force)
  * IRQ Chip for MSI PCI/PCI-X/PCI-Express Devices,
  * which implement the MSI or MSI-X Capability Structure.
  */
-static struct irq_chip msi_chip = {
+struct irq_chip msi_chip = {
 	.name			= "PCI-MSI",
 	.irq_unmask		= unmask_msi_irq,
 	.irq_mask		= mask_msi_irq,
@@ -3240,7 +3238,7 @@ static int hpet_msi_set_affinity(struct irq_data *data,
 	return IRQ_SET_MASK_OK_NOCOPY;
 }
 
-static struct irq_chip hpet_msi_type = {
+struct irq_chip hpet_msi_type = {
 	.name = "HPET_MSI",
 	.irq_unmask = hpet_msi_unmask,
 	.irq_mask = hpet_msi_mask,
diff --git a/drivers/iommu/irq_remapping.c b/drivers/iommu/irq_remapping.c
index 07ce86a..21ef344 100644
--- a/drivers/iommu/irq_remapping.c
+++ b/drivers/iommu/irq_remapping.c
@@ -373,19 +373,26 @@ static void ir_print_prefix(struct irq_data *data, struct seq_file *p)
 	seq_printf(p, " IR-%s", data->chip->name);
 }
 
-static void irq_remap_modify_chip_defaults(struct irq_chip *chip)
+static void __init irq_remap_modify_chip_defaults(struct irq_chip *chip)
 {
+	printk(KERN_DEBUG "irq_chip: %s ==> IR-%s", chip->name, chip->name);
 	chip->irq_print_chip = ir_print_prefix;
 	chip->irq_ack = ir_ack_apic_edge;
 	chip->irq_eoi = ir_ack_apic_level;
 	chip->irq_set_affinity = x86_io_apic_ops.set_affinity;
 }
 
+void __init irq_remap_modify_chips(void)
+{
+	irq_remap_modify_chip_defaults(&ioapic_chip);
+	irq_remap_modify_chip_defaults(&msi_chip);
+	irq_remap_modify_chip_defaults(&hpet_msi_type);
+}
+
 bool setup_remapped_irq(int irq, struct irq_cfg *cfg, struct irq_chip *chip)
 {
 	if (!irq_remapped(cfg))
 		return false;
 	irq_set_status_flags(irq, IRQ_MOVE_PCNTXT);
-	irq_remap_modify_chip_defaults(chip);
 	return true;
 }
-- 
1.8.1.4


  parent reply	other threads:[~2013-06-07 22:30 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-06-07 22:30 [PATCH v3 00/27] x86, irq: support ioapic device hotplug Yinghai Lu
2013-06-07 22:30 ` [PATCH v3 01/27] x86, irq: Change irq_remap_modify_chip_defaults to static Yinghai Lu
2013-06-07 22:30 ` Yinghai Lu [this message]
2013-06-09 14:54   ` [PATCH v3 02/27] x86, irq: Modify irq chip once for irq remapping Sebastian Andrzej Siewior
2013-06-10 23:17     ` Yinghai Lu
2013-06-07 22:30 ` [PATCH v3 03/27] x86, irq: Print out MSI/MSI-X clearly Yinghai Lu
2013-06-07 22:30 ` [PATCH v3 04/27] x86, irq: Show MSI-X in /proc/interrupt Yinghai Lu
2013-06-07 22:30 ` [PATCH v3 05/27] x86, irq: Make dmar_msi/hpet_msi irq_chip name consistent Yinghai Lu
2013-06-09 15:16   ` Sebastian Andrzej Siewior
2013-06-10 23:40     ` Yinghai Lu
2013-06-07 22:30 ` [PATCH v3 06/27] ia64, irq: Add dummy create_irq_nr() Yinghai Lu
2013-06-09 15:22   ` Sebastian Andrzej Siewior
2013-06-10 23:41     ` Yinghai Lu
2013-06-11 21:52       ` Luck, Tony
2013-06-07 22:30 ` [PATCH v3 07/27] iommu, irq: Allocate irq_desc for dmar_msi with local node Yinghai Lu
2013-06-09 15:31   ` Sebastian Andrzej Siewior
2013-06-10 23:43     ` Yinghai Lu
2013-06-07 22:30 ` [PATCH v3 08/27] x86, irq: kill create_irq() Yinghai Lu
2013-06-09 15:35   ` Sebastian Andrzej Siewior
2013-06-07 22:30 ` [PATCH v3 09/27] x86, irq: Convert irq_2_pin list to generic list Yinghai Lu
2013-06-09 15:52   ` Sebastian Andrzej Siewior
2013-06-07 22:30 ` [PATCH v3 10/27] genirq: Split __irq_reserve_irqs from irq_alloc_descs Yinghai Lu
2013-06-10 13:51   ` Alexander Gordeev
2013-06-10 19:16     ` Yinghai Lu
2013-06-10 19:42       ` Alexander Gordeev
2013-06-10 19:39   ` Thomas Gleixner
2013-06-10 23:55     ` Yinghai Lu
2013-06-07 22:30 ` [PATCH v3 11/27] x86, irq: Add realloc_irq_and_cfg_at() Yinghai Lu
2013-06-09 19:13   ` Sebastian Andrzej Siewior
2013-06-10 20:13   ` Thomas Gleixner
2013-06-07 22:30 ` [PATCH v3 12/27] x86, irq: Move down arch_early_irq_init() Yinghai Lu
2013-06-07 22:30 ` [PATCH v3 13/27] x86, irq: Split out alloc_ioapic_save_registers() Yinghai Lu
2013-06-07 22:31 ` [PATCH v3 14/27] xen, irq: call irq_realloc_desc_at() at first Yinghai Lu
2013-06-07 22:31 ` [PATCH v3 15/27] x86, irq: pre-reserve irq range/realloc for booting path Yinghai Lu
2013-06-07 22:31 ` [PATCH v3 16/27] x86, irq: Add ioapic_gsi_to_irq Yinghai Lu
2013-06-07 22:31 ` [PATCH v3 17/27] genirq: Bail out early in free_desc() Yinghai Lu
2013-06-10 20:43   ` Thomas Gleixner
2013-06-07 22:31 ` [PATCH v3 18/27] x86, irq: More strict checking about registering ioapic Yinghai Lu
2013-06-07 22:31 ` [PATCH v3 19/27] x86, irq: Make mp_register_ioapic handle hot-added ioapic Yinghai Lu
2013-06-07 22:31 ` [PATCH v3 20/27] x86, irq: Add mp_unregister_ioapic to handle hot-remove ioapic Yinghai Lu
2013-06-07 22:31 ` [PATCH v3 21/27] x86, irq: Make ioapics loop skip blank slots Yinghai Lu
2013-06-07 22:31 ` [PATCH v3 22/27] x86, ioapic: Find usable ioapic id for 64bit Yinghai Lu
2013-06-07 22:31 ` [PATCH v3 23/27] x86: Move declaration for mp_register_ioapic() Yinghai Lu
2013-06-07 22:31 ` [PATCH v3 24/27] PCI, x86: Make ioapic hotplug support built-in Yinghai Lu
2013-06-07 22:31 ` [PATCH v3 25/27] PCI, x86, ACPI: Link acpi ioapic register to ioapic Yinghai Lu
2013-06-07 22:31 ` [PATCH v3 26/27] PCI, x86, ACPI: Enable ioapic hotplug support with acpi host bridge Yinghai Lu
2013-06-07 22:31 ` [PATCH v3 27/27] PCI, x86, ACPI: get ioapic address from acpi device Yinghai Lu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1370644273-10495-3-git-send-email-yinghai@kernel.org \
    --to=yinghai@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=hpa@zytor.com \
    --cc=joro@8bytes.org \
    --cc=konrad.wilk@oracle.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=mingo@elte.hu \
    --cc=rjw@sisk.pl \
    --cc=sebastian@breakpoint.cc \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).