From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mga03.intel.com ([143.182.124.21]:16372 "EHLO mga03.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932589Ab3GCOCc (ORCPT ); Wed, 3 Jul 2013 10:02:32 -0400 From: Mika Westerberg To: Greg Kroah-Hartman , Bjorn Helgaas , "Rafael J. Wysocki" Cc: Jesse Barnes , Yinghai Lu , john.ronciak@intel.com, miles.j.penner@intel.com, bruce.w.allan@intel.com, Heikki Krogerus , "Kirill A. Shutemov" , Mika Westerberg , linux-kernel@vger.kernel.org, linux-acpi@vger.kernel.org, linux-pci@vger.kernel.org, x86@kernel.org Subject: [PATCH v2 3/8] PCI: acpiphp: enable_device(): rescan even if no new devices on slot Date: Wed, 3 Jul 2013 17:04:50 +0300 Message-Id: <1372860295-8306-4-git-send-email-mika.westerberg@linux.intel.com> In-Reply-To: <1372860295-8306-1-git-send-email-mika.westerberg@linux.intel.com> References: <1372860295-8306-1-git-send-email-mika.westerberg@linux.intel.com> Sender: linux-pci-owner@vger.kernel.org List-ID: From: "Kirill A. Shutemov" pci_scan_slot() returns number of new devices connected *directly* connected to the slot. Current enable_device() checks the return value and stops if it doesn't see a new device. In Thunderbolt chaining case the new device can be deeper in hierarchy, so do the rescan anyway. Because of that we must make sure that pcibios_resource_survey_bus() and check_hotplug_bridge() get called only for a just found bus and not the ones already added to the system. Failure to do so will lead to resource conflicts. Signed-off-by: Kirill A. Shutemov Signed-off-by: Mika Westerberg --- drivers/pci/hotplug/acpiphp_glue.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index b983e29..0f4da3b 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -685,18 +685,13 @@ static int __ref enable_device(struct acpiphp_slot *slot) struct pci_dev *dev; struct pci_bus *bus = slot->bridge->pci_bus; struct acpiphp_func *func; - int num, max, pass; + int max, pass; LIST_HEAD(add_list); list_for_each_entry(func, &slot->funcs, sibling) acpiphp_bus_add(func); - num = pci_scan_slot(bus, PCI_DEVFN(slot->device, 0)); - if (num == 0) { - /* Maybe only part of funcs are added. */ - dbg("No new device found\n"); - goto err_exit; - } + pci_scan_slot(bus, PCI_DEVFN(slot->device, 0)); max = acpiphp_max_busnr(bus); for (pass = 0; pass < 2; pass++) { @@ -742,8 +737,6 @@ static int __ref enable_device(struct acpiphp_slot *slot) } } - - err_exit: return 0; } -- 1.8.3.2