From: Yinghai Lu <yinghai@kernel.org>
To: "H. Peter Anvin" <hpa@zytor.com>, Tony Luck <tony.luck@intel.com>,
Bjorn Helgaas <bhelgaas@google.com>,
"Rafael J. Wysocki" <rjw@sisk.pl>, x86 <x86@kernel.org>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-acpi@vger.kernel.org, Yinghai Lu <yinghai@kernel.org>,
Joerg Roedel <joro@8bytes.org>,
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Subject: [PATCH v2 08/10] IOMMU: Add intel_enable_irq_remapping_one()
Date: Thu, 2 Jan 2014 16:08:15 -0800 [thread overview]
Message-ID: <1388707697-16800-9-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1388707697-16800-1-git-send-email-yinghai@kernel.org>
Will need that for hot-added iommu interrupt remapping suppor.
Signed-off-by: Yinghai <yinghai@kernel.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
drivers/iommu/intel_irq_remapping.c | 134 ++++++++++++++++++++++++++++++++++--
1 file changed, 127 insertions(+), 7 deletions(-)
diff --git a/drivers/iommu/intel_irq_remapping.c b/drivers/iommu/intel_irq_remapping.c
index 8471f40..41d03d7 100644
--- a/drivers/iommu/intel_irq_remapping.c
+++ b/drivers/iommu/intel_irq_remapping.c
@@ -218,7 +218,7 @@ static struct intel_iommu *map_ioapic_to_ir(int apic)
{
int i;
- for (i = 0; i < MAX_IO_APICS; i++)
+ for (i = 0; i < ir_ioapic_num; i++)
if (ir_ioapic[i].id == apic)
return ir_ioapic[i].iommu;
return NULL;
@@ -324,7 +324,7 @@ static int set_ioapic_sid(struct irte *irte, int apic)
if (!irte)
return -1;
- for (i = 0; i < MAX_IO_APICS; i++) {
+ for (i = 0; i < ir_ioapic_num; i++) {
if (ir_ioapic[i].id == apic) {
sid = (ir_ioapic[i].bus << 8) | ir_ioapic[i].devfn;
break;
@@ -704,6 +704,7 @@ static void ir_parse_one_ioapic_scope(struct acpi_dmar_device_scope *scope,
struct acpi_dmar_pci_path *path;
u8 bus;
int count;
+ int i;
bus = scope->bus;
path = (struct acpi_dmar_pci_path *)(scope + 1);
@@ -720,11 +721,16 @@ static void ir_parse_one_ioapic_scope(struct acpi_dmar_device_scope *scope,
path++;
}
- ir_ioapic[ir_ioapic_num].bus = bus;
- ir_ioapic[ir_ioapic_num].devfn = PCI_DEVFN(path->device, path->function);
- ir_ioapic[ir_ioapic_num].iommu = iommu;
- ir_ioapic[ir_ioapic_num].id = scope->enumeration_id;
- ir_ioapic_num++;
+ for (i = 0; i < ir_ioapic_num; i++)
+ if (!ir_ioapic[i].iommu)
+ break;
+
+ ir_ioapic[i].bus = bus;
+ ir_ioapic[i].devfn = PCI_DEVFN(path->device, path->function);
+ ir_ioapic[i].iommu = iommu;
+ ir_ioapic[i].id = scope->enumeration_id;
+ if (i == ir_ioapic_num)
+ ir_ioapic_num++;
}
static int ir_parse_ioapic_hpet_scope(struct acpi_dmar_header *header,
@@ -1139,6 +1145,120 @@ static int intel_setup_hpet_msi(unsigned int irq, unsigned int id)
return 0;
}
+void disable_irq_remapping_one(struct dmar_drhd_unit *drhd)
+{
+ struct intel_iommu *iommu = drhd->iommu;
+ int i;
+
+ /*
+ * Disable Interrupt-remapping for the DRHD's now.
+ */
+ if (!ecap_ir_support(iommu->ecap))
+ return;
+
+ iommu_disable_irq_remapping(iommu);
+
+ /* remove it from ir_ioapic */
+ for (i = 0; i < ir_ioapic_num; i++)
+ if (ir_ioapic[i].iommu == iommu) {
+ ir_ioapic[i].iommu = NULL;
+ ir_ioapic[i].id = 0xff;
+ }
+}
+
+static int parse_ioapics_under_ir_one(struct dmar_drhd_unit *drhd)
+{
+ int ir_supported = 0;
+
+ struct intel_iommu *iommu = drhd->iommu;
+
+ if (ecap_ir_support(iommu->ecap)) {
+ if (ir_parse_ioapic_hpet_scope(drhd->hdr, iommu))
+ return -1;
+
+ ir_supported = 1;
+ }
+
+ return ir_supported;
+}
+
+int intel_enable_irq_remapping_one(struct dmar_drhd_unit *drhd)
+{
+ int setup = 0;
+ int eim = 1;
+ int ret;
+ struct intel_iommu *iommu = drhd->iommu;
+
+ if (parse_ioapics_under_ir_one(drhd) != 1) {
+ pr_info("Not enable interrupt remapping\n");
+ return -1;
+ }
+
+ /*
+ * If the queued invalidation is already initialized,
+ * shouldn't disable it.
+ */
+ if (!iommu->qi) {
+ /*
+ * Clear previous faults.
+ */
+ dmar_fault(-1, iommu);
+
+ /*
+ * Disable intr remapping and queued invalidation, if already
+ * enabled prior to OS handover.
+ */
+ iommu_disable_irq_remapping(iommu);
+
+ dmar_disable_qi(iommu);
+ }
+
+ /*
+ * check for the Interrupt-remapping support
+ */
+
+ if (ecap_ir_support(iommu->ecap))
+ if (eim && !ecap_eim_support(iommu->ecap)) {
+ pr_info("DRHD %Lx: EIM not supported by DRHD, ecap %Lx\n",
+ drhd->reg_base_addr, iommu->ecap);
+ return -1;
+ }
+
+ /*
+ * Enable queued invalidation for the DRHD's.
+ */
+ ret = dmar_enable_qi(iommu);
+
+ if (ret) {
+ pr_err("DRHD %Lx: failed to enable queued, invalidation, ecap %Lx, ret %d\n",
+ drhd->reg_base_addr, iommu->ecap, ret);
+ return -1;
+ }
+
+ /*
+ * Setup Interrupt-remapping for the DRHD's now.
+ */
+ if (ecap_ir_support(iommu->ecap)) {
+ if (intel_setup_irq_remapping(iommu, eim))
+ goto error;
+
+ setup = 1;
+ }
+
+ if (!setup)
+ goto error;
+
+ pr_info("Enabled IRQ remapping in %s mode\n", eim ? "x2apic" : "xapic");
+
+ return eim ? IRQ_REMAP_X2APIC_MODE : IRQ_REMAP_XAPIC_MODE;
+
+error:
+ /*
+ * handle error condition gracefully here!
+ */
+ return -1;
+}
+
struct irq_remap_ops intel_irq_remap_ops = {
.supported = intel_irq_remapping_supported,
.prepare = dmar_table_init,
--
1.8.4
next prev parent reply other threads:[~2014-01-03 0:07 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-03 0:08 [PATCH v2 00/10] IOMMU: irq-remapping and dmar hotplug support Yinghai Lu
2014-01-03 0:08 ` [PATCH v2 01/10] IOMMU: Update dmar units devices list during hotplug Yinghai Lu
2014-01-03 0:08 ` [PATCH v2 02/10] IOMMU: Fix tboot force iommu logic Yinghai Lu
2014-01-03 0:08 ` [PATCH v2 03/10] IOMMU: Don't clean handler data before free_irq() Yinghai Lu
2014-01-03 0:08 ` [PATCH v2 04/10] IOMMU: iommu_unique_seq_id() Yinghai Lu
2014-01-03 0:08 ` [PATCH v2 05/10] ACPI: Add acpi_run_dsm() Yinghai Lu
2014-01-03 0:08 ` [PATCH v2 06/10] IOMMU: Separate free_dmar_iommu from free_iommu Yinghai Lu
2014-01-03 0:08 ` [PATCH v2 07/10] IOMMU: Add init_dmar_one() Yinghai Lu
2014-01-03 0:08 ` Yinghai Lu [this message]
2014-01-03 0:08 ` [PATCH v2 09/10] IOMMU: Add dmar_parse_one_drhd() Yinghai Lu
2014-01-03 0:08 ` [PATCH v2 10/10] IOMMU: Add intel iommu irq-remapping and dmar hotplug support Yinghai Lu
2014-01-06 2:23 ` Yijing Wang
2014-01-06 3:12 ` Yijing Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1388707697-16800-9-git-send-email-yinghai@kernel.org \
--to=yinghai@kernel.org \
--cc=bhelgaas@google.com \
--cc=hpa@zytor.com \
--cc=joro@8bytes.org \
--cc=konrad.wilk@oracle.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=rjw@sisk.pl \
--cc=tony.luck@intel.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).