* [PATCH] PCI,pciehp: Don't set slot off when found device already exists.
@ 2014-01-13 8:02 Yijing Wang
2014-01-29 22:38 ` Bjorn Helgaas
2014-02-12 0:41 ` Bjorn Helgaas
0 siblings, 2 replies; 4+ messages in thread
From: Yijing Wang @ 2014-01-13 8:02 UTC (permalink / raw)
To: Bjorn Helgaas; +Cc: linux-pci, Yijing Wang, Hanjun Guo
If we found device already exists during hot add device, we should
leave it, not to set slot off.
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
drivers/pci/hotplug/pciehp_ctrl.c | 3 ++-
drivers/pci/hotplug/pciehp_pci.c | 2 +-
2 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c
index 38f0186..f27b0ff 100644
--- a/drivers/pci/hotplug/pciehp_ctrl.c
+++ b/drivers/pci/hotplug/pciehp_ctrl.c
@@ -224,7 +224,8 @@ static int board_added(struct slot *p_slot)
if (retval) {
ctrl_err(ctrl, "Cannot add device at %04x:%02x:00\n",
pci_domain_nr(parent), parent->number);
- goto err_exit;
+ if (retval != -EEXIST)
+ goto err_exit;
}
if (PWR_LED(ctrl))
diff --git a/drivers/pci/hotplug/pciehp_pci.c b/drivers/pci/hotplug/pciehp_pci.c
index aac7a40..9b87b49 100644
--- a/drivers/pci/hotplug/pciehp_pci.c
+++ b/drivers/pci/hotplug/pciehp_pci.c
@@ -48,7 +48,7 @@ int pciehp_configure_device(struct slot *p_slot)
"at %04x:%02x:00, cannot hot-add\n", pci_name(dev),
pci_domain_nr(parent), parent->number);
pci_dev_put(dev);
- return -EINVAL;
+ return -EEXIST;
}
num = pci_scan_slot(parent, PCI_DEVFN(0, 0));
--
1.7.1
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [PATCH] PCI,pciehp: Don't set slot off when found device already exists.
2014-01-13 8:02 [PATCH] PCI,pciehp: Don't set slot off when found device already exists Yijing Wang
@ 2014-01-29 22:38 ` Bjorn Helgaas
2014-02-08 1:50 ` Yijing Wang
2014-02-12 0:41 ` Bjorn Helgaas
1 sibling, 1 reply; 4+ messages in thread
From: Bjorn Helgaas @ 2014-01-29 22:38 UTC (permalink / raw)
To: Yijing Wang; +Cc: linux-pci, Hanjun Guo
On Mon, Jan 13, 2014 at 04:02:48PM +0800, Yijing Wang wrote:
> If we found device already exists during hot add device, we should
> leave it, not to set slot off.
Does this fix a defect? What's the scenario where this fixes a problem
in the current code? I think this change makes sense, but I'd like to
have a better description of the problem that we're fixing.
I see the following path that looks like it might be a problem with the
current code if slot power is off when we resume after a suspend:
pciehp_resume
pciehp_enable_slot
board_added
pciehp_configure_device
Is this the scenario you're addressing?
> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
> ---
> drivers/pci/hotplug/pciehp_ctrl.c | 3 ++-
> drivers/pci/hotplug/pciehp_pci.c | 2 +-
> 2 files changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c
> index 38f0186..f27b0ff 100644
> --- a/drivers/pci/hotplug/pciehp_ctrl.c
> +++ b/drivers/pci/hotplug/pciehp_ctrl.c
> @@ -224,7 +224,8 @@ static int board_added(struct slot *p_slot)
> if (retval) {
> ctrl_err(ctrl, "Cannot add device at %04x:%02x:00\n",
> pci_domain_nr(parent), parent->number);
> - goto err_exit;
> + if (retval != -EEXIST)
> + goto err_exit;
> }
>
> if (PWR_LED(ctrl))
> diff --git a/drivers/pci/hotplug/pciehp_pci.c b/drivers/pci/hotplug/pciehp_pci.c
> index aac7a40..9b87b49 100644
> --- a/drivers/pci/hotplug/pciehp_pci.c
> +++ b/drivers/pci/hotplug/pciehp_pci.c
> @@ -48,7 +48,7 @@ int pciehp_configure_device(struct slot *p_slot)
> "at %04x:%02x:00, cannot hot-add\n", pci_name(dev),
> pci_domain_nr(parent), parent->number);
> pci_dev_put(dev);
> - return -EINVAL;
> + return -EEXIST;
> }
>
> num = pci_scan_slot(parent, PCI_DEVFN(0, 0));
> --
> 1.7.1
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH] PCI,pciehp: Don't set slot off when found device already exists.
2014-01-29 22:38 ` Bjorn Helgaas
@ 2014-02-08 1:50 ` Yijing Wang
0 siblings, 0 replies; 4+ messages in thread
From: Yijing Wang @ 2014-02-08 1:50 UTC (permalink / raw)
To: Bjorn Helgaas; +Cc: linux-pci, Hanjun Guo
On 2014/1/30 6:38, Bjorn Helgaas wrote:
> On Mon, Jan 13, 2014 at 04:02:48PM +0800, Yijing Wang wrote:
>> If we found device already exists during hot add device, we should
>> leave it, not to set slot off.
>
> Does this fix a defect? What's the scenario where this fixes a problem
> in the current code? I think this change makes sense, but I'd like to
> have a better description of the problem that we're fixing.
>
> I see the following path that looks like it might be a problem with the
> current code if slot power is off when we resume after a suspend:
>
> pciehp_resume
> pciehp_enable_slot
> board_added
> pciehp_configure_device
>
> Is this the scenario you're addressing?
Yes, it is.
I found this case by reviewing the code. But I have no platform
supports pciehp resume. So I can not test it in real.
Thanks!
Yijing.
>
>> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
>> ---
>> drivers/pci/hotplug/pciehp_ctrl.c | 3 ++-
>> drivers/pci/hotplug/pciehp_pci.c | 2 +-
>> 2 files changed, 3 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c
>> index 38f0186..f27b0ff 100644
>> --- a/drivers/pci/hotplug/pciehp_ctrl.c
>> +++ b/drivers/pci/hotplug/pciehp_ctrl.c
>> @@ -224,7 +224,8 @@ static int board_added(struct slot *p_slot)
>> if (retval) {
>> ctrl_err(ctrl, "Cannot add device at %04x:%02x:00\n",
>> pci_domain_nr(parent), parent->number);
>> - goto err_exit;
>> + if (retval != -EEXIST)
>> + goto err_exit;
>> }
>>
>> if (PWR_LED(ctrl))
>> diff --git a/drivers/pci/hotplug/pciehp_pci.c b/drivers/pci/hotplug/pciehp_pci.c
>> index aac7a40..9b87b49 100644
>> --- a/drivers/pci/hotplug/pciehp_pci.c
>> +++ b/drivers/pci/hotplug/pciehp_pci.c
>> @@ -48,7 +48,7 @@ int pciehp_configure_device(struct slot *p_slot)
>> "at %04x:%02x:00, cannot hot-add\n", pci_name(dev),
>> pci_domain_nr(parent), parent->number);
>> pci_dev_put(dev);
>> - return -EINVAL;
>> + return -EEXIST;
>> }
>>
>> num = pci_scan_slot(parent, PCI_DEVFN(0, 0));
>> --
>> 1.7.1
>>
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
--
Thanks!
Yijing
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] PCI,pciehp: Don't set slot off when found device already exists.
2014-01-13 8:02 [PATCH] PCI,pciehp: Don't set slot off when found device already exists Yijing Wang
2014-01-29 22:38 ` Bjorn Helgaas
@ 2014-02-12 0:41 ` Bjorn Helgaas
1 sibling, 0 replies; 4+ messages in thread
From: Bjorn Helgaas @ 2014-02-12 0:41 UTC (permalink / raw)
To: Yijing Wang; +Cc: linux-pci, Hanjun Guo
On Mon, Jan 13, 2014 at 04:02:48PM +0800, Yijing Wang wrote:
> If we found device already exists during hot add device, we should
> leave it, not to set slot off.
>
> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Applied to pci/pciehp for v3.15, thanks!
Bjorn
> ---
> drivers/pci/hotplug/pciehp_ctrl.c | 3 ++-
> drivers/pci/hotplug/pciehp_pci.c | 2 +-
> 2 files changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c
> index 38f0186..f27b0ff 100644
> --- a/drivers/pci/hotplug/pciehp_ctrl.c
> +++ b/drivers/pci/hotplug/pciehp_ctrl.c
> @@ -224,7 +224,8 @@ static int board_added(struct slot *p_slot)
> if (retval) {
> ctrl_err(ctrl, "Cannot add device at %04x:%02x:00\n",
> pci_domain_nr(parent), parent->number);
> - goto err_exit;
> + if (retval != -EEXIST)
> + goto err_exit;
> }
>
> if (PWR_LED(ctrl))
> diff --git a/drivers/pci/hotplug/pciehp_pci.c b/drivers/pci/hotplug/pciehp_pci.c
> index aac7a40..9b87b49 100644
> --- a/drivers/pci/hotplug/pciehp_pci.c
> +++ b/drivers/pci/hotplug/pciehp_pci.c
> @@ -48,7 +48,7 @@ int pciehp_configure_device(struct slot *p_slot)
> "at %04x:%02x:00, cannot hot-add\n", pci_name(dev),
> pci_domain_nr(parent), parent->number);
> pci_dev_put(dev);
> - return -EINVAL;
> + return -EEXIST;
> }
>
> num = pci_scan_slot(parent, PCI_DEVFN(0, 0));
> --
> 1.7.1
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2014-02-12 0:41 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-01-13 8:02 [PATCH] PCI,pciehp: Don't set slot off when found device already exists Yijing Wang
2014-01-29 22:38 ` Bjorn Helgaas
2014-02-08 1:50 ` Yijing Wang
2014-02-12 0:41 ` Bjorn Helgaas
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).