linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lucas Stach <l.stach@pengutronix.de>
To: Richard Zhu <r65037@freescale.com>
Cc: Shawn Guo <shawn.guo@linaro.org>,
	Bjorn Helgaas <bhelgaas@google.com>,
	linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	kernel@pengutronix.de
Subject: [PATCH v2 2/2] PCI: imx6: add support for MSI
Date: Wed, 26 Feb 2014 11:27:18 +0100	[thread overview]
Message-ID: <1393410438-28205-2-git-send-email-l.stach@pengutronix.de> (raw)
In-Reply-To: <1393410438-28205-1-git-send-email-l.stach@pengutronix.de>

From: Juergen Beisert <jbe@pengutronix.de>

This patch adds support for Message Signaled Interrupt in the
imx6q-pcie driver. It is done in a similar way as for the Exynos
PCIe driver (commit f342d940ee0e3a2b5197fd4fbade1cb6bbc960b7),
which is also using the Synopsys designware PCIe IP core.

Signed-off-by: Harro Haan <hrhaan@gmail.com>
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
v2: fix typo MCI->MSI
---
 drivers/pci/host/pci-imx6.c | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c
index ee082509b0ba..344a72184307 100644
--- a/drivers/pci/host/pci-imx6.c
+++ b/drivers/pci/host/pci-imx6.c
@@ -25,6 +25,7 @@
 #include <linux/resource.h>
 #include <linux/signal.h>
 #include <linux/types.h>
+#include <linux/interrupt.h>
 
 #include "pcie-designware.h"
 
@@ -329,6 +330,17 @@ static int imx6_pcie_wait_for_link(struct pcie_port *pp)
 	return 0;
 }
 
+/* legacy IRQD/MSI interrupt */
+static irqreturn_t imx6_pcie_irqd_msi_handler(int irq, void *arg)
+{
+	struct pcie_port *pp = arg;
+
+	if (IS_ENABLED(CONFIG_PCI_MSI))
+		dw_handle_msi_irq(pp);
+
+	return IRQ_HANDLED;
+}
+
 static int imx6_pcie_start_link(struct pcie_port *pp)
 {
 	struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp);
@@ -403,6 +415,9 @@ static void imx6_pcie_host_init(struct pcie_port *pp)
 	dw_pcie_setup_rc(pp);
 
 	imx6_pcie_start_link(pp);
+
+	if (IS_ENABLED(CONFIG_PCI_MSI))
+		dw_pcie_msi_init(pp);
 }
 
 static void imx6_pcie_reset_phy(struct pcie_port *pp)
@@ -498,6 +513,20 @@ static int imx6_add_pcie_port(struct pcie_port *pp,
 		return -ENODEV;
 	}
 
+	if (IS_ENABLED(CONFIG_PCI_MSI)) {
+		pp->msi_irq = platform_get_irq(pdev, 3);
+		if (!pp->msi_irq) {
+			dev_err(&pdev->dev, "failed to get INTD/MSI\n");
+			return -ENODEV;
+		}
+
+		ret = devm_request_irq(&pdev->dev, pp->msi_irq,
+					imx6_pcie_irqd_msi_handler,
+					IRQF_SHARED, "mx6-pcie-msi", pp);
+		if (ret)
+			dev_err(&pdev->dev, "failed to request INTD/MSI irq\n");
+	}
+
 	pp->root_bus_nr = -1;
 	pp->ops = &imx6_pcie_host_ops;
 
-- 
1.8.5.3


  reply	other threads:[~2014-02-26 10:27 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-02-26 10:27 [PATCH v2 1/2] ARM: dts: imx6: adjust the interrupt list in order to support MSI Lucas Stach
2014-02-26 10:27 ` Lucas Stach [this message]
2014-02-26 16:36   ` [PATCH v2 2/2] PCI: imx6: add support for MSI Mark Rutland
2014-02-26 14:01 ` [PATCH v2 1/2] ARM: dts: imx6: adjust the interrupt list in order to support MSI Shawn Guo
2014-02-26 16:34 ` Mark Rutland
2014-02-26 16:57   ` Lucas Stach

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1393410438-28205-2-git-send-email-l.stach@pengutronix.de \
    --to=l.stach@pengutronix.de \
    --cc=bhelgaas@google.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=r65037@freescale.com \
    --cc=shawn.guo@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).