linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Phil Edworthy <phil.edworthy@renesas.com>
To: linux-pci@vger.kernel.org
Cc: linux-sh@vger.kernel.org, Bjorn Helgaas <bhelgaas@google.com>,
	Valentine Barshak <valentine.barshak@cogentembedded.com>,
	Simon Horman <horms@verge.net.au>,
	Magnus Damm <magnus.damm@gmail.com>,
	Ben Dooks <ben.dooks@codethink.co.uk>,
	Phil Edworthy <phil.edworthy@renesas.com>,
	devicetree@vger.kernel.org
Subject: [PATCH 5/9] dt-bindings: pci: rcar pcie device tree bindings
Date: Thu, 13 Mar 2014 09:50:04 +0000	[thread overview]
Message-ID: <1394704208-7490-6-git-send-email-phil.edworthy@renesas.com> (raw)
In-Reply-To: <1394704208-7490-1-git-send-email-phil.edworthy@renesas.com>

This patch adds the bindings for the rcar PCIE driver. The driver
resides under drivers/pci/host/pcie-rcar.c

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
---
 Documentation/devicetree/bindings/pci/rcar-pci.txt | 40 ++++++++++++++++++++++
 1 file changed, 40 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/rcar-pci.txt

diff --git a/Documentation/devicetree/bindings/pci/rcar-pci.txt b/Documentation/devicetree/bindings/pci/rcar-pci.txt
new file mode 100644
index 0000000..0e219b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/rcar-pci.txt
@@ -0,0 +1,40 @@
+* Renesas RCar PCIe interface
+
+Required properties:
+- compatible: should contain one of the following
+	"renesas,r8a7779-pcie", "renesas,r8a7790-pcie", "renesas,r8a7791-pcie"
+- reg: base addresses and lengths of the pcie controller.
+- #address-cells: set to <3>
+- #size-cells: set to <2>
+- device_type: set to "pci"
+- ranges: ranges for the PCI memory and I/O regions
+- interrupts: interrupt values for MSI interrupt
+- #interrupt-cells: set to <1>
+- interrupt-map-mask and interrupt-map: standard PCI properties
+	to define the mapping of the PCIe interface to interrupt
+	numbers.
+- clocks: from common clock binding: handle to pci clock.
+- clock-names: from common clock binding: should be "pcie"
+
+Example:
+
+SoC specific DT Entry:
+
+	pcie: pcie@0x01000000 {
+		compatible = "renesas,r8a7790-pcie";
+		reg = <0 0xfe000000 0 0x80000>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
+			  0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
+			  0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
+			  0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+		interrupts = <0 116 4>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic 0 116 4>;
+		clocks = <&mstp3_clks R8A7790_CLK_PCIE>;
+		clock-names = "pcie";
+		status = "disabled";
+	};
-- 
1.9.0


  parent reply	other threads:[~2014-03-13  9:50 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-03-13  9:49 [PATCH 0/9 v3] R-Car Gen2 PCIe host driver Phil Edworthy
2014-03-13  9:50 ` [PATCH 1/9 v3] PCI: host: rcar: Add Renesas R-Car PCIe driver Phil Edworthy
2014-03-20 16:41   ` Phil.Edworthy
2014-03-20 16:49     ` Ben Dooks
2014-03-13  9:50 ` [PATCH 2/9] PCI: host: rcar: Add MSI support Phil Edworthy
2014-03-13  9:50 ` [PATCH 3/9] ARM: shmobile: r8a7790: Add PCIe clock device tree nodes Phil Edworthy
2014-03-13  9:50 ` [PATCH 4/9] ARM: shmobile: r8a7791: " Phil Edworthy
2014-03-13  9:50 ` Phil Edworthy [this message]
2014-03-13 10:00   ` [PATCH 5/9] dt-bindings: pci: rcar pcie device tree bindings Arnd Bergmann
2014-03-13 10:28     ` Phil.Edworthy
2014-03-13 11:30       ` Arnd Bergmann
2014-03-13  9:50 ` [PATCH 6/9] ARM: shmobile: Add PCIe device tree nodes for R8A7790 Phil Edworthy
2014-03-13  9:50 ` [PATCH 7/9] ARM: shmobile: Add PCIe device tree nodes for R8A7791 Koelsch board Phil Edworthy
2014-03-13  9:50 ` [PATCH 8/9] ARM: koelsch: Add PCIe to defconfig Phil Edworthy
2014-03-13  9:50 ` [PATCH 9/9] ARM: koelsch: Add HAVE_ARM_ARCH_TIMER " Phil Edworthy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1394704208-7490-6-git-send-email-phil.edworthy@renesas.com \
    --to=phil.edworthy@renesas.com \
    --cc=ben.dooks@codethink.co.uk \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=horms@verge.net.au \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-sh@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    --cc=valentine.barshak@cogentembedded.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).