From: Phil Edworthy <phil.edworthy@renesas.com>
To: linux-pci@vger.kernel.org
Cc: linux-sh@vger.kernel.org, Bjorn Helgaas <bhelgaas@google.com>,
Valentine Barshak <valentine.barshak@cogentembedded.com>,
Simon Horman <horms@verge.net.au>,
Magnus Damm <magnus.damm@gmail.com>,
Ben Dooks <ben.dooks@codethink.co.uk>,
Phil Edworthy <phil.edworthy@renesas.com>
Subject: [PATCH 7/9] ARM: shmobile: Add PCIe device tree nodes for R8A7791 Koelsch board
Date: Thu, 13 Mar 2014 09:50:06 +0000 [thread overview]
Message-ID: <1394704208-7490-8-git-send-email-phil.edworthy@renesas.com> (raw)
In-Reply-To: <1394704208-7490-1-git-send-email-phil.edworthy@renesas.com>
This patch adds the device tree nodes for the R8A7791 Koelsch board
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
---
arch/arm/boot/dts/r8a7791-koelsch.dts | 4 ++++
arch/arm/boot/dts/r8a7791.dtsi | 19 +++++++++++++++++++
2 files changed, 23 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index e24fed9..17c953f 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -352,3 +352,7 @@
spi-cpha;
};
};
+
+&pcie {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index ccfba57..915a5a6 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -836,4 +836,23 @@
#size-cells = <0>;
status = "disabled";
};
+
+ pcie: pcie@fe000000 {
+ compatible = "renesas,r8a7791-pcie";
+ reg = <0 0xfe000000 0 0x80000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
+ 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
+ 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
+ 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+ interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic 0 116 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7791_CLK_PCIE>;
+ clock-names = "pcie";
+ status = "disabled";
+ };
};
--
1.7.9.5
next prev parent reply other threads:[~2014-03-13 9:50 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-13 9:49 [PATCH 0/9 v3] R-Car Gen2 PCIe host driver Phil Edworthy
2014-03-13 9:50 ` [PATCH 1/9 v3] PCI: host: rcar: Add Renesas R-Car PCIe driver Phil Edworthy
2014-03-20 16:41 ` Phil.Edworthy
2014-03-20 16:49 ` Ben Dooks
2014-03-13 9:50 ` [PATCH 2/9] PCI: host: rcar: Add MSI support Phil Edworthy
2014-03-13 9:50 ` [PATCH 3/9] ARM: shmobile: r8a7790: Add PCIe clock device tree nodes Phil Edworthy
2014-03-13 9:50 ` [PATCH 4/9] ARM: shmobile: r8a7791: " Phil Edworthy
2014-03-13 9:50 ` [PATCH 5/9] dt-bindings: pci: rcar pcie device tree bindings Phil Edworthy
2014-03-13 10:00 ` Arnd Bergmann
2014-03-13 10:28 ` Phil.Edworthy
2014-03-13 11:30 ` Arnd Bergmann
2014-03-13 9:50 ` [PATCH 6/9] ARM: shmobile: Add PCIe device tree nodes for R8A7790 Phil Edworthy
2014-03-13 9:50 ` Phil Edworthy [this message]
2014-03-13 9:50 ` [PATCH 8/9] ARM: koelsch: Add PCIe to defconfig Phil Edworthy
2014-03-13 9:50 ` [PATCH 9/9] ARM: koelsch: Add HAVE_ARM_ARCH_TIMER " Phil Edworthy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1394704208-7490-8-git-send-email-phil.edworthy@renesas.com \
--to=phil.edworthy@renesas.com \
--cc=ben.dooks@codethink.co.uk \
--cc=bhelgaas@google.com \
--cc=horms@verge.net.au \
--cc=linux-pci@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=valentine.barshak@cogentembedded.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).