From: Phil Edworthy <phil.edworthy@renesas.com>
To: linux-pci@vger.kernel.org
Cc: linux-sh@vger.kernel.org,
LAKML <linux-arm-kernel@lists.infradead.org>,
Bjorn Helgaas <bhelgaas@google.com>,
Valentine Barshak <valentine.barshak@cogentembedded.com>,
Simon Horman <horms@verge.net.au>,
Magnus Damm <magnus.damm@gmail.com>,
Ben Dooks <ben.dooks@codethink.co.uk>,
Phil Edworthy <phil.edworthy@renesas.com>,
devicetree@vger.kernel.org
Subject: [PATCH v4 5/9] dt-bindings: pci: rcar pcie device tree bindings
Date: Fri, 21 Mar 2014 10:32:44 +0000 [thread overview]
Message-ID: <1395397968-6242-6-git-send-email-phil.edworthy@renesas.com> (raw)
In-Reply-To: <1395397968-6242-1-git-send-email-phil.edworthy@renesas.com>
This patch adds the bindings for the rcar PCIE driver. The driver
resides under drivers/pci/host/pcie-rcar.c
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
---
Documentation/devicetree/bindings/pci/rcar-pci.txt | 40 ++++++++++++++++++++++
1 file changed, 40 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pci/rcar-pci.txt
diff --git a/Documentation/devicetree/bindings/pci/rcar-pci.txt b/Documentation/devicetree/bindings/pci/rcar-pci.txt
new file mode 100644
index 0000000..0e219b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/rcar-pci.txt
@@ -0,0 +1,40 @@
+* Renesas RCar PCIe interface
+
+Required properties:
+- compatible: should contain one of the following
+ "renesas,r8a7779-pcie", "renesas,r8a7790-pcie", "renesas,r8a7791-pcie"
+- reg: base addresses and lengths of the pcie controller.
+- #address-cells: set to <3>
+- #size-cells: set to <2>
+- device_type: set to "pci"
+- ranges: ranges for the PCI memory and I/O regions
+- interrupts: interrupt values for MSI interrupt
+- #interrupt-cells: set to <1>
+- interrupt-map-mask and interrupt-map: standard PCI properties
+ to define the mapping of the PCIe interface to interrupt
+ numbers.
+- clocks: from common clock binding: handle to pci clock.
+- clock-names: from common clock binding: should be "pcie"
+
+Example:
+
+SoC specific DT Entry:
+
+ pcie: pcie@0x01000000 {
+ compatible = "renesas,r8a7790-pcie";
+ reg = <0 0xfe000000 0 0x80000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
+ 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
+ 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
+ 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+ interrupts = <0 116 4>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic 0 116 4>;
+ clocks = <&mstp3_clks R8A7790_CLK_PCIE>;
+ clock-names = "pcie";
+ status = "disabled";
+ };
--
1.9.0
next prev parent reply other threads:[~2014-03-21 10:33 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-21 10:32 [PATCH v4 0/9] R-Car Gen2 PCIe host driver Phil Edworthy
2014-03-21 10:32 ` [PATCH v4 1/9] PCI: host: rcar: Add Renesas R-Car PCIe driver Phil Edworthy
2014-03-21 11:04 ` Arnd Bergmann
2014-03-21 13:59 ` Phil.Edworthy
2014-03-21 14:06 ` Ben Dooks
2014-03-21 15:07 ` Arnd Bergmann
2014-03-23 10:05 ` Geert Uytterhoeven
2014-03-21 10:32 ` [PATCH v4 2/9] PCI: host: rcar: Add MSI support Phil Edworthy
2014-03-21 11:17 ` Lucas Stach
2014-03-21 14:15 ` Phil.Edworthy
2014-03-21 14:26 ` Lucas Stach
2014-03-21 14:34 ` Phil.Edworthy
2014-03-21 10:32 ` [PATCH v4 3/9] ARM: shmobile: r8a7790: Add PCIe clock device tree nodes Phil Edworthy
2014-03-21 10:32 ` [PATCH v4 4/9] ARM: shmobile: r8a7791: " Phil Edworthy
2014-03-21 10:32 ` Phil Edworthy [this message]
2014-03-21 11:23 ` [PATCH v4 5/9] dt-bindings: pci: rcar pcie device tree bindings Lucas Stach
2014-03-21 14:18 ` Phil.Edworthy
2014-03-21 14:30 ` Lucas Stach
2014-03-21 15:02 ` Phil.Edworthy
[not found] ` <OFC7DD5DAC.D378B300-ON80257CA2.0051ECEE-80257CA2.00529F98@LocalDomain>
2014-03-24 12:04 ` Phil.Edworthy
2014-03-24 12:15 ` Ben Dooks
2014-03-24 12:25 ` Phil.Edworthy
[not found] ` <OF85DD7B1D.716DE42D-ON80257CA5.00443087-80257CA5.004447DB@LocalDomain>
2014-03-24 12:46 ` Phil.Edworthy
2014-03-24 12:53 ` Lucas Stach
2014-03-21 10:32 ` [PATCH v4 6/9] ARM: shmobile: Add PCIe device tree nodes for R8A7790 Phil Edworthy
2014-03-21 15:29 ` Sergei Shtylyov
2014-03-21 14:53 ` Phil.Edworthy
2014-03-21 14:57 ` Arnd Bergmann
2014-03-21 16:40 ` Jason Gunthorpe
2014-03-21 16:42 ` Sergei Shtylyov
2014-03-21 16:31 ` Phil.Edworthy
2014-03-21 16:49 ` Jason Gunthorpe
2014-03-23 10:13 ` Geert Uytterhoeven
2014-03-21 15:32 ` Sergei Shtylyov
2014-03-21 15:06 ` Phil.Edworthy
2014-03-21 10:32 ` [PATCH v4 7/9] ARM: shmobile: Add PCIe device tree nodes for R8A7791 Koelsch board Phil Edworthy
2014-03-21 10:32 ` [PATCH v4 8/9] ARM: koelsch: Add PCIe to defconfig Phil Edworthy
2014-03-21 10:32 ` [PATCH v4 9/9] ARM: koelsch: Add HAVE_ARM_ARCH_TIMER " Phil Edworthy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1395397968-6242-6-git-send-email-phil.edworthy@renesas.com \
--to=phil.edworthy@renesas.com \
--cc=ben.dooks@codethink.co.uk \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=horms@verge.net.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=valentine.barshak@cogentembedded.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).