linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andreas Noever <andreas.noever@gmail.com>
To: linux-kernel@vger.kernel.org,
	Matthew Garrett <matthew.garrett@nebula.com>,
	Greg KH <greg@kroah.com>, Bjorn Helgaas <bhelgaas@google.com>,
	linux-pci@vger.kernel.org
Cc: Andreas Noever <andreas.noever@gmail.com>
Subject: [PATCH v3 04/15] thunderbolt: Add tb_regs.h
Date: Mon, 26 May 2014 17:18:01 +0200	[thread overview]
Message-ID: <1401117492-2870-5-git-send-email-andreas.noever@gmail.com> (raw)
In-Reply-To: <1401117492-2870-1-git-send-email-andreas.noever@gmail.com>

Every thunderbolt device consists (logically) of a switch with multiple
ports. Every port contains up to four config regions (HOPS, PORT,
SWITCH, COUNTERS) which are used to configure the device.

The tb_regs.h file contains all known registers and capabilities from
these config regions.

Signed-off-by: Andreas Noever <andreas.noever@gmail.com>
---
 drivers/thunderbolt/tb.c      |   5 +
 drivers/thunderbolt/tb_regs.h | 213 ++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 218 insertions(+)
 create mode 100644 drivers/thunderbolt/tb_regs.h

diff --git a/drivers/thunderbolt/tb.c b/drivers/thunderbolt/tb.c
index 6920979..164dea0 100644
--- a/drivers/thunderbolt/tb.c
+++ b/drivers/thunderbolt/tb.c
@@ -9,6 +9,7 @@
 #include <linux/delay.h>
 
 #include "tb.h"
+#include "tb_regs.h"
 
 /* hotplug handling */
 
@@ -100,6 +101,10 @@ struct tb *thunderbolt_alloc_and_start(struct tb_nhi *nhi)
 {
 	struct tb *tb;
 
+	BUILD_BUG_ON(sizeof(struct tb_regs_switch_header) != 5 * 4);
+	BUILD_BUG_ON(sizeof(struct tb_regs_port_header) != 8 * 4);
+	BUILD_BUG_ON(sizeof(struct tb_regs_hop) != 2 * 4);
+
 	tb = kzalloc(sizeof(*tb), GFP_KERNEL);
 	if (!tb)
 		return NULL;
diff --git a/drivers/thunderbolt/tb_regs.h b/drivers/thunderbolt/tb_regs.h
new file mode 100644
index 0000000..6577af7
--- /dev/null
+++ b/drivers/thunderbolt/tb_regs.h
@@ -0,0 +1,213 @@
+/*
+ * Thunderbolt Cactus Ridge driver - Port/Switch config area registers
+ *
+ * Every thunderbolt device consists (logically) of a switch with multiple
+ * ports. Every port contains up to four config regions (HOPS, PORT, SWITCH,
+ * COUNTERS) which are used to configure the device.
+ *
+ * Copyright (c) 2014 Andreas Noever <andreas.noever@gmail.com>
+ */
+
+#ifndef _TB_REGS
+#define _TB_REGS
+
+#include <linux/types.h>
+
+
+#define TB_ROUTE_SHIFT 8  /* number of bits in a port entry of a route */
+
+
+/*
+ * TODO: should be 63? But we do not know how to receive frames larger than 256
+ * bytes at the frame level. (header + checksum = 16, 60*4 = 240)
+ */
+#define TB_MAX_CONFIG_RW_LENGTH 60
+
+enum tb_cap {
+	TB_CAP_PHY		= 0x0001,
+	TB_CAP_TIME1		= 0x0003,
+	TB_CAP_PCIE		= 0x0004,
+	TB_CAP_I2C		= 0x0005,
+	TB_CAP_PLUG_EVENTS	= 0x0105, /* also EEPROM */
+	TB_CAP_TIME2		= 0x0305,
+	TB_CAL_IECS		= 0x0405,
+	TB_CAP_LINK_CONTROLLER	= 0x0605, /* also IECS */
+};
+
+enum tb_port_state {
+	TB_PORT_DISABLED	= 0, /* tb_cap_phy.disable == 1 */
+	TB_PORT_CONNECTING	= 1, /* retry */
+	TB_PORT_UP		= 2,
+	TB_PORT_UNPLUGGED	= 7,
+};
+
+/* capability headers */
+
+struct tb_cap_basic {
+	u8 next;
+	/* enum tb_cap cap:8; prevent "narrower than values of its type" */
+	u8 cap; /* if cap == 0x05 then we have a extended capability */
+} __packed;
+
+struct tb_cap_extended_short {
+	u8 next; /* if next and length are zero then we have a long cap */
+	enum tb_cap cap:16;
+	u8 length;
+} __packed;
+
+struct tb_cap_extended_long {
+	u8 zero1;
+	enum tb_cap cap:16;
+	u8 zero2;
+	u16 next;
+	u16 length;
+} __packed;
+
+/* capabilities */
+
+struct tb_cap_link_controller {
+	struct tb_cap_extended_long cap_header;
+	u32 count:4; /* number of link controllers */
+	u32 unknown1:4;
+	u32 base_offset:8; /*
+			    * offset (into this capability) of the configuration
+			    * area of the first link controller
+			    */
+	u32 length:12; /* link controller configuration area length */
+	u32 unknown2:4; /* TODO check that length is correct */
+} __packed;
+
+struct tb_cap_phy {
+	struct tb_cap_basic cap_header;
+	u32 unknown1:16;
+	u32 unknown2:14;
+	bool disable:1;
+	u32 unknown3:11;
+	enum tb_port_state state:4;
+	u32 unknown4:2;
+} __packed;
+
+struct tb_eeprom_ctl {
+	bool clock:1; /* send pulse to transfer one bit */
+	bool access_low:1; /* set to 0 before access */
+	bool data_out:1; /* to eeprom */
+	bool data_in:1; /* from eeprom */
+	bool access_high:1; /* set to 1 before access */
+	bool not_present:1; /* should be 0 */
+	bool unknown1:1;
+	bool present:1; /* should be 1 */
+	u32 unknown2:24;
+} __packed;
+
+struct tb_cap_plug_events {
+	struct tb_cap_extended_short cap_header;
+	u32 __unknown1:2;
+	u32 plug_events:5;
+	u32 __unknown2:25;
+	u32 __unknown3;
+	u32 __unknown4;
+	struct tb_eeprom_ctl eeprom_ctl;
+	u32 __unknown5[7];
+	u32 drom_offset; /* 32 bit register, but eeprom addresses are 16 bit */
+} __packed;
+
+/* device headers */
+
+/* Present on port 0 in TB_CFG_SWITCH at address zero. */
+struct tb_regs_switch_header {
+	/* DWORD 0 */
+	u16 vendor_id;
+	u16 device_id;
+	/* DWORD 1 */
+	u32 first_cap_offset:8;
+	u32 upstream_port_number:6;
+	u32 max_port_number:6;
+	u32 depth:3;
+	u32 __unknown1:1;
+	u32 revision:8;
+	/* DWORD 2 */
+	u32 route_lo;
+	/* DWORD 3 */
+	u32 route_hi:31;
+	bool enabled:1;
+	/* DWORD 4 */
+	u32 plug_events_delay:8; /*
+				  * RW, pause between plug events in
+				  * milliseconds. Writing 0x00 is interpreted
+				  * as 255ms.
+				  */
+	u32 __unknown4:16;
+	u32 thunderbolt_version:8;
+} __packed;
+
+enum tb_port_type {
+	TB_TYPE_INACTIVE	= 0x000000,
+	TB_TYPE_PORT		= 0x000001,
+	TB_TYPE_NHI		= 0x000002,
+	/* TB_TYPE_ETHERNET	= 0x020000, lower order bits are not known */
+	/* TB_TYPE_SATA		= 0x080000, lower order bits are not known */
+	TB_TYPE_DP_HDMI_IN	= 0x0e0101,
+	TB_TYPE_DP_HDMI_OUT	= 0x0e0102,
+	TB_TYPE_PCIE_DOWN	= 0x100101,
+	TB_TYPE_PCIE_UP		= 0x100102,
+	/* TB_TYPE_USB		= 0x200000, lower order bits are not known */
+};
+
+/* Present on every port in TB_CF_PORT at address zero. */
+struct tb_regs_port_header {
+	/* DWORD 0 */
+	u16 vendor_id;
+	u16 device_id;
+	/* DWORD 1 */
+	u32 first_cap_offset:8;
+	u32 max_counters:11;
+	u32 __unknown1:5;
+	u32 revision:8;
+	/* DWORD 2 */
+	enum tb_port_type type:24;
+	u32 thunderbolt_version:8;
+	/* DWORD 3 */
+	u32 __unknown2:20;
+	u32 port_number:6;
+	u32 __unknown3:6;
+	/* DWORD 4 */
+	u32 nfc_credits;
+	/* DWORD 5 */
+	u32 max_in_hop_id:11;
+	u32 max_out_hop_id:11;
+	u32 __unkown4:10;
+	/* DWORD 6 */
+	u32 __unknown5;
+	/* DWORD 7 */
+	u32 __unknown6;
+
+} __packed;
+
+/* Hop register from TB_CFG_HOPS. 8 byte per entry. */
+struct tb_regs_hop {
+	/* DWORD 0 */
+	u32 next_hop:11; /*
+			  * hop to take after sending the packet through
+			  * out_port (on the incoming port of the next switch)
+			  */
+	u32 out_port:6; /* next port of the path (on the same switch) */
+	u32 initial_credits:8;
+	u32 unknown1:6; /* set to zero */
+	bool enable:1;
+
+	/* DWORD 1 */
+	u32 weight:4;
+	u32 unknown2:4; /* set to zero */
+	u32 priority:3;
+	bool drop_packages:1;
+	u32 counter:11; /* index into TB_CFG_COUNTERS on this port */
+	bool counter_enable:1;
+	bool ingress_fc:1;
+	bool egress_fc:1;
+	bool ingress_shared_buffer:1;
+	bool egress_shared_buffer:1;
+	u32 unknown3:4; /* set to zero */
+} __packed;
+
+
+#endif
-- 
1.9.3


  parent reply	other threads:[~2014-05-26 15:18 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-05-26 15:17 [PATCH v3 00/15] Thunderbolt driver for Apple MacBooks Andreas Noever
2014-05-26 15:17 ` [PATCH v3 01/15] thunderbolt: Add initial cactus ridge NHI support Andreas Noever
2014-05-26 15:17 ` [PATCH v3 02/15] thunderbolt: Add control channel interface Andreas Noever
2014-05-26 15:18 ` [PATCH v3 03/15] thunderbolt: Setup control channel Andreas Noever
2014-05-26 15:18 ` Andreas Noever [this message]
2014-05-26 15:18 ` [PATCH v3 05/15] thunderbolt: Initialize root switch and ports Andreas Noever
2014-05-26 15:18 ` [PATCH v3 06/15] thunderbolt: Add thunderbolt capability handling Andreas Noever
2014-05-26 15:18 ` [PATCH v3 07/15] thunderbolt: Enable plug events Andreas Noever
2014-05-26 15:18 ` [PATCH v3 08/15] thunderbolt: Scan for downstream switches Andreas Noever
2014-05-26 15:18 ` [PATCH v3 09/15] thunderbolt: Handle hotplug events Andreas Noever
2014-05-28 22:26   ` Bjorn Helgaas
2014-05-26 15:18 ` [PATCH v3 10/15] thunderbolt: Add path setup code Andreas Noever
2014-05-28 22:30   ` Bjorn Helgaas
2014-05-26 15:18 ` [PATCH v3 11/15] thunderbolt: Add support for simple pci tunnels Andreas Noever
2014-05-26 15:18 ` [PATCH v3 12/15] pci: Add pci_fixup_suspend_late quirk pass Andreas Noever
2014-05-28 22:36   ` Bjorn Helgaas
2014-05-30 14:33     ` Andreas Noever
2014-05-30 16:09       ` Greg KH
2014-05-26 15:18 ` [PATCH v3 13/15] pci: Suspend/resume quirks for appel thunderbolt Andreas Noever
2014-05-27 14:07   ` Matthew Garrett
2014-05-28 22:43   ` Bjorn Helgaas
2014-05-26 15:18 ` [PATCH v3 14/15] thunderbolt: Read switch uid from EEPROM Andreas Noever
2014-05-26 15:18 ` [PATCH v3 15/15] thunderbolt: Add suspend/hibernate support Andreas Noever
2014-05-27 14:09 ` [PATCH v3 00/15] Thunderbolt driver for Apple MacBooks Matthew Garrett

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1401117492-2870-5-git-send-email-andreas.noever@gmail.com \
    --to=andreas.noever@gmail.com \
    --cc=bhelgaas@google.com \
    --cc=greg@kroah.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=matthew.garrett@nebula.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).