linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andreas Noever <andreas.noever@gmail.com>
To: linux-kernel@vger.kernel.org,
	Matthew Garrett <matthew.garrett@nebula.com>,
	Greg KH <greg@kroah.com>, Bjorn Helgaas <bhelgaas@google.com>,
	linux-pci@vger.kernel.org
Cc: Andreas Noever <andreas.noever@gmail.com>
Subject: [PATCH v5 00/15] Thunderbolt driver for Apple MacBooks
Date: Tue,  3 Jun 2014 22:03:57 +0200	[thread overview]
Message-ID: <1401825852-4745-1-git-send-email-andreas.noever@gmail.com> (raw)

Hi,

Updated version of the driver. Includes changes by Matthew to make it work on
Falcon Ridge hardware (present in the newest Mac(Book)Pro). 

Changes since v4 (suggested by Matthew):
 - Changed the PCI quirks to check just for Apple hardware instead of checking
   against a list of machines. (The PCI id check already restricts this quirk
to the relevant Apple machines).
 - Added Falcon Ridge PCI id to the driver and to the "wait_for_thunderbolt"
   quirk (the "poweroff_thunderbolt" quirk is no longer necessary for Falcon
Ridge devices).
 - Fixed plug events for Falcon Ridge hardware.

@Matthew: I think that your patch was missing the Falcon Ridge PCI id within
the wait_for_thunderbolt quirk (I have added it). If you have time could you
verify that suspend/resume works on your MacPro?  Thanks!

As before Matthew's ACPI changes (latest version: [1]) are required for this to
work properly. Without them you need to boot with a coldplugged TB device to
prevent the firmware from disabling the controller.

Thanks,
Andreas

[1]: https://lkml.org/lkml/2014/6/1/165 


Andreas Noever (15):
  thunderbolt: Add initial cactus ridge NHI support
  thunderbolt: Add control channel interface
  thunderbolt: Setup control channel
  thunderbolt: Add tb_regs.h
  thunderbolt: Initialize root switch and ports
  thunderbolt: Add thunderbolt capability handling
  thunderbolt: Enable plug events
  thunderbolt: Scan for downstream switches
  thunderbolt: Handle hotplug events
  thunderbolt: Add path setup code.
  thunderbolt: Add support for simple pci tunnels
  PCI: Add pci_fixup_suspend_late quirk pass
  PCI: Suspend/resume quirks for Apple thunderbolt
  thunderbolt: Read switch uid from EEPROM
  thunderbolt: Add suspend/hibernate support

 drivers/Kconfig                   |   2 +
 drivers/Makefile                  |   1 +
 drivers/pci/pci-driver.c          |  18 +-
 drivers/pci/quirks.c              | 104 ++++++
 drivers/thunderbolt/Kconfig       |  12 +
 drivers/thunderbolt/Makefile      |   3 +
 drivers/thunderbolt/cap.c         | 116 ++++++
 drivers/thunderbolt/ctl.c         | 731 ++++++++++++++++++++++++++++++++++++++
 drivers/thunderbolt/ctl.h         |  75 ++++
 drivers/thunderbolt/eeprom.c      | 189 ++++++++++
 drivers/thunderbolt/nhi.c         | 677 +++++++++++++++++++++++++++++++++++
 drivers/thunderbolt/nhi.h         | 114 ++++++
 drivers/thunderbolt/nhi_regs.h    | 101 ++++++
 drivers/thunderbolt/path.c        | 215 +++++++++++
 drivers/thunderbolt/switch.c      | 498 ++++++++++++++++++++++++++
 drivers/thunderbolt/tb.c          | 431 ++++++++++++++++++++++
 drivers/thunderbolt/tb.h          | 266 ++++++++++++++
 drivers/thunderbolt/tb_regs.h     | 213 +++++++++++
 drivers/thunderbolt/tunnel_pci.c  | 232 ++++++++++++
 drivers/thunderbolt/tunnel_pci.h  |  30 ++
 include/asm-generic/vmlinux.lds.h |   3 +
 include/linux/pci.h               |  12 +-
 22 files changed, 4038 insertions(+), 5 deletions(-)
 create mode 100644 drivers/thunderbolt/Kconfig
 create mode 100644 drivers/thunderbolt/Makefile
 create mode 100644 drivers/thunderbolt/cap.c
 create mode 100644 drivers/thunderbolt/ctl.c
 create mode 100644 drivers/thunderbolt/ctl.h
 create mode 100644 drivers/thunderbolt/eeprom.c
 create mode 100644 drivers/thunderbolt/nhi.c
 create mode 100644 drivers/thunderbolt/nhi.h
 create mode 100644 drivers/thunderbolt/nhi_regs.h
 create mode 100644 drivers/thunderbolt/path.c
 create mode 100644 drivers/thunderbolt/switch.c
 create mode 100644 drivers/thunderbolt/tb.c
 create mode 100644 drivers/thunderbolt/tb.h
 create mode 100644 drivers/thunderbolt/tb_regs.h
 create mode 100644 drivers/thunderbolt/tunnel_pci.c
 create mode 100644 drivers/thunderbolt/tunnel_pci.h

-- 
2.0.0


             reply	other threads:[~2014-06-03 20:04 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-06-03 20:03 Andreas Noever [this message]
2014-06-03 20:03 ` [PATCH v5 01/15] thunderbolt: Add initial cactus ridge NHI support Andreas Noever
2014-06-20  7:41   ` Paul Bolle
2014-06-20 16:34     ` Greg KH
2014-06-20 19:45     ` Andreas Noever
2014-06-20 20:28       ` Paul Bolle
2014-06-03 20:03 ` [PATCH v5 02/15] thunderbolt: Add control channel interface Andreas Noever
2014-06-03 20:04 ` [PATCH v5 03/15] thunderbolt: Setup control channel Andreas Noever
2014-06-03 20:04 ` [PATCH v5 04/15] thunderbolt: Add tb_regs.h Andreas Noever
2014-06-03 20:04 ` [PATCH v5 05/15] thunderbolt: Initialize root switch and ports Andreas Noever
2014-06-03 20:04 ` [PATCH v5 06/15] thunderbolt: Add thunderbolt capability handling Andreas Noever
2014-06-03 20:04 ` [PATCH v5 07/15] thunderbolt: Enable plug events Andreas Noever
2014-06-03 20:04 ` [PATCH v5 08/15] thunderbolt: Scan for downstream switches Andreas Noever
2014-06-03 20:04 ` [PATCH v5 09/15] thunderbolt: Handle hotplug events Andreas Noever
2014-06-03 20:04 ` [PATCH v5 10/15] thunderbolt: Add path setup code Andreas Noever
2014-06-03 20:04 ` [PATCH v5 11/15] thunderbolt: Add support for simple pci tunnels Andreas Noever
2014-06-03 20:04 ` [PATCH v5 12/15] PCI: Add pci_fixup_suspend_late quirk pass Andreas Noever
2014-06-03 20:04 ` [PATCH v5 13/15] PCI: Suspend/resume quirks for Apple thunderbolt Andreas Noever
2014-06-03 20:04 ` [PATCH v5 14/15] thunderbolt: Read switch uid from EEPROM Andreas Noever
2014-06-03 20:04 ` [PATCH v5 15/15] thunderbolt: Add suspend/hibernate support Andreas Noever
2014-06-03 20:33 ` [PATCH v5 00/15] Thunderbolt driver for Apple MacBooks Greg KH
2014-06-19 21:14 ` Greg KH
2014-06-30  9:17   ` Andreas Noever

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1401825852-4745-1-git-send-email-andreas.noever@gmail.com \
    --to=andreas.noever@gmail.com \
    --cc=bhelgaas@google.com \
    --cc=greg@kroah.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=matthew.garrett@nebula.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).